diff --git a/.beads/beads.jsonl b/.beads/beads.jsonl
index 72c90591..ef331b4e 100644
--- a/.beads/beads.jsonl
+++ b/.beads/beads.jsonl
@@ -10,10 +10,10 @@
 {"id":"bd-08fd","content_hash":"a76be9b5de417bce89d29b20a5a675d6ac65339c5fd538683a5d76fe3c75a50c","title":"Test child issue","description":"","status":"closed","priority":3,"issue_type":"task","created_at":"2025-11-02T11:50:40.640901-08:00","updated_at":"2025-11-02T11:50:47.309652-08:00","closed_at":"2025-11-02T11:50:47.309652-08:00","dependencies":[{"issue_id":"bd-08fd","depends_on_id":"bd-ce75","type":"blocks","created_at":"2025-11-02T11:50:40.642073-08:00","created_by":"stevey"}]}
 {"id":"bd-09b5f2f5","content_hash":"2cf0ab565f49aaa39cc7128cef964f99b37f14a948fbad3c617f9397df1e2541","title":"Daemon fails to auto-import after git pull updates JSONL","description":"After git pull updates .beads/issues.jsonl, daemon doesn't automatically re-import changes, causing stale data to be shown until next sync cycle (up to 5 minutes).\n\nReproduction:\n1. Repo A: Close issues, export, commit, push\n2. Repo B: git pull (successfully updates .beads/issues.jsonl)\n3. bd show \u003cissue\u003e shows OLD status from daemon's SQLite db\n4. JSONL on disk has correct new status\n\nRoot cause: Daemon sync cycle runs on timer (5min). When user manually runs git pull, daemon doesn't detect JSONL was updated externally and continues serving stale data from SQLite.\n\nImpact:\n- High for AI agents using beads in git workflows\n- Breaks fundamental git-as-source-of-truth model\n- Confusing UX: git log shows commit, bd shows old state\n- Data consistency issues between JSONL and daemon\n\nSee WYVERN_SYNC_ISSUE.md for full analysis.","design":"Three possible solutions:\n\nOption 1: Auto-detect and re-import (recommended)\n- Before serving any bd command, check if .beads/issues.jsonl mtime \u003e last import time\n- If newer, auto-import before processing request\n- Fast check, minimal overhead\n\nOption 2: File watcher in daemon\n- Daemon watches .beads/issues.jsonl for mtime changes\n- Auto-imports when file changes\n- More complex, requires file watching infrastructure\n\nOption 3: Explicit sync command\n- User runs `bd sync` after git pull\n- Manual, error-prone, defeats automation\n\nRecommended: Option 1 (auto-detect) + Option 3 (explicit sync) as fallback.","acceptance_criteria":"1. After git pull updates .beads/issues.jsonl, next bd command sees fresh data\n2. No manual import or daemon restart required\n3. Performance impact \u003c 10ms per command (mtime check is fast)\n4. Works in both daemon and non-daemon modes\n5. Test: Two repo clones, update in one, pull in other, verify immediate sync","notes":"**Fixed in v0.21.2!**\n\nThe daemon auto-import is fully implemented:\n- internal/autoimport package handles staleness detection\n- internal/importer package provides shared import logic (used by both CLI and daemon)\n- daemon's checkAndAutoImportIfStale() calls autoimport.AutoImportIfNewer()\n- importFunc uses importer.ImportIssues() with auto-rename enabled\n- All tests passing\n\nThe critical data corruption bug is FIXED:\n✅ After git pull, daemon detects JSONL is newer (mtime check)\n✅ Daemon auto-imports before serving requests\n✅ No stale data served\n✅ No data loss in multi-agent workflows\n\nVerification needed: Run two-repo test to confirm end-to-end behavior.","status":"closed","priority":0,"issue_type":"epic","created_at":"2025-10-25T23:13:12.270766-07:00","updated_at":"2025-11-01T16:52:50.931197-07:00","closed_at":"2025-11-01T16:52:50.931197-07:00"}
 {"id":"bd-0a90","content_hash":"d04ded2e8194db5c42c27641f68e52b553ff500e9101861e87e7956ec012dc74","title":"bd show --json doesn't include dependency type field","description":"Fix GitHub issue #202. The JSON output from bd show and bd list commands should include the dependency type field (and optionally created_at, created_by) to match internal storage format and enable better tooling integration.","notes":"PR #203 updated with cleaner implementation: https://github.com/steveyegge/beads/pull/203\n\n## Final Implementation\n\nCleanest possible approach - no internal helper methods needed:\n\n**Design:**\n- `GetDependenciesWithMetadata()` / `GetDependentsWithMetadata()` - canonical implementations with full SQL query\n- `GetDependencies()` / `GetDependents()` - thin wrappers that strip metadata for backward compat\n- `scanIssuesWithDependencyType()` - shared helper for scanning rows with dependency type\n\n**Benefits:**\n- Single source of truth - the `...WithMetadata()` methods ARE the implementation\n- Eliminated ~139 lines of duplicated SQL and scanning code\n- All tests passing (14 dependency-related tests)\n- Backward compatible\n- dependency_type field appears correctly in JSON output\n\n**Note on scan helpers:**\nThe duplication between `scanIssues()` and `scanIssuesWithDependencyType()` is necessary because they handle different SQL result shapes (16 vs 17 columns). This is justified as they serve fundamentally different purposes based on query structure.","status":"closed","priority":2,"issue_type":"bug","created_at":"2025-11-02T09:42:08.712725096Z","updated_at":"2025-11-02T11:50:54.292546-08:00","closed_at":"2025-11-02T11:50:54.292546-08:00","external_ref":"https://github.com/steveyegge/beads/issues/202"}
-{"id":"bd-0d9c","content_hash":"b02c689e746ebd319b22150e6fdb519ef13c319c01297e05a602d4464023de62","title":"YABB: Spurious issue updates during normal operations","description":"Issue bd-627d was updated during config refactoring session without any actual changes to it. Only timestamps and content_hash changed.\n\nObserved: Running various bd commands (list, create, etc.) caused bd-627d updated_at to change from 14:14 to 14:31.\n\nExpected: Issues should only be updated when explicitly modified.\n\nThis causes:\n- Dirty JSONL after every session\n- False conflicts in git\n- Confusing git history\n\nLikely culprit: Daemon auto-import/export cycle or database migration touching all issues.","status":"open","priority":1,"issue_type":"bug","created_at":"2025-11-02T14:36:31.023552-08:00","updated_at":"2025-11-02T14:36:31.023552-08:00"}
+{"id":"bd-0d9c","content_hash":"60687afe819911b629ea95bd7f827a1b6d363b3f641da52f3f541c4eb132c6f4","title":"YABB: Spurious issue updates during normal operations","description":"Issue bd-627d was updated during config refactoring session without any actual changes to it. Only timestamps and content_hash changed.\n\nObserved: Running various bd commands (list, create, etc.) caused bd-627d updated_at to change from 14:14 to 14:31.\n\nExpected: Issues should only be updated when explicitly modified.\n\nThis causes:\n- Dirty JSONL after every session\n- False conflicts in git\n- Confusing git history\n\nLikely culprit: Daemon auto-import/export cycle or database migration touching all issues.","status":"in_progress","priority":1,"issue_type":"bug","created_at":"2025-11-02T14:36:31.023552-08:00","updated_at":"2025-11-02T15:35:17.003584-08:00"}
 {"id":"bd-0dcea000","content_hash":"a6fc218b07d270e3498957525c39a869f7c850d687339b6d758a246be20c9591","title":"Add tests for internal/importer package","description":"Currently 0.0% coverage. Need tests for JSONL import logic including collision detection and resolution.","status":"open","priority":2,"issue_type":"task","created_at":"2025-10-29T14:06:21.071024-07:00","updated_at":"2025-10-30T17:12:58.183211-07:00","dependencies":[{"issue_id":"bd-0dcea000","depends_on_id":"bd-cbed9619.5","type":"blocks","created_at":"2025-10-29T19:52:05.531279-07:00","created_by":"import-remap"},{"issue_id":"bd-0dcea000","depends_on_id":"bd-cbed9619.4","type":"blocks","created_at":"2025-10-29T19:52:05.53166-07:00","created_by":"import-remap"}]}
 {"id":"bd-0e1f2b1b","content_hash":"c0b1677fe3f4aa3f395ae4d79bff5362632d5db26477bf571c09f9177b8741ef","title":"Event-driven daemon architecture","description":"Replace 5-second polling sync loop with event-driven architecture that reacts instantly to changes. Eliminates stale data issues while reducing CPU ~60%. Key components: FileWatcher (fsnotify), Debouncer (500ms), RPC mutation events, optional git hooks. Target latency: \u003c500ms (vs 5000ms). See event_driven_daemon.md for full design.","status":"closed","priority":1,"issue_type":"epic","created_at":"2025-10-28T16:20:02.430479-07:00","updated_at":"2025-10-30T17:12:58.221424-07:00","closed_at":"2025-10-28T16:30:26.631191-07:00"}
-{"id":"bd-0e74","content_hash":"8a8661c26a526f67df2a64f2da6a18e7db3be52fc8c2971dd7fd90bdb1b7dd91","title":"Comprehensive testing for separate branch workflow","description":"Comprehensive testing for separate branch workflow including unit tests, integration tests, and performance testing.\n\nTasks:\n- Unit tests for worktree management\n- Unit tests for config parsing\n- Integration tests: create/update/close → beads branch\n- Integration test: merge beads → main\n- Integration test: protected branch scenario\n- Integration test: network failure recovery\n- Integration test: config change handling\n- Manual testing guide\n- Performance testing (worktree overhead)\n\nTest scenarios: fresh setup, issue operations, merge workflow, protected branch, error handling, migration, multiple workspaces, sparse checkout\n\nEstimated effort: 4-5 days","acceptance_criteria":"- All unit tests pass\n- All integration tests pass\n- Manual testing guide works\n- No data loss in any scenario\n- Performance acceptable (\u003c 100ms overhead per commit)","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.580741-08:00","updated_at":"2025-11-02T15:22:35.580741-08:00","dependencies":[{"issue_id":"bd-0e74","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:51.348226-08:00","created_by":"stevey"}]}
+{"id":"bd-0e74","content_hash":"b0f407df62d992c094ba763db11c4fd5be6386b34f3b7cf94665f2e37dbc0999","title":"Comprehensive testing for separate branch workflow","description":"Comprehensive testing for separate branch workflow including unit tests, integration tests, and performance testing.\n\nTasks:\n- Unit tests for worktree management\n- Unit tests for config parsing\n- Integration tests: create/update/close → beads branch\n- Integration test: merge beads → main\n- Integration test: protected branch scenario\n- Integration test: network failure recovery\n- Integration test: config change handling\n- Manual testing guide\n- Performance testing (worktree overhead)\n\nTest scenarios: fresh setup, issue operations, merge workflow, protected branch, error handling, migration, multiple workspaces, sparse checkout\n\nEstimated effort: 4-5 days","acceptance_criteria":"- All unit tests pass\n- All integration tests pass\n- Manual testing guide works\n- No data loss in any scenario\n- Performance acceptable (\u003c 100ms overhead per commit)","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.580741-08:00","updated_at":"2025-11-02T15:35:17.004299-08:00","dependencies":[{"issue_id":"bd-0e74","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:51.348226-08:00","created_by":"stevey"}]}
 {"id":"bd-1022","content_hash":"0b712a337844711597d2dd950d27d4c032a3b746a27f44326d62db740f5944e9","title":"Use external_ref as primary matching key for import updates","description":"Enable re-syncing from external systems (Jira, GitHub, Linear) by using external_ref as the primary matching key during imports. Currently imports treat any content change as a collision, making it impossible to sync updates from external systems without creating duplicates.\n\nSee GH #142 for detailed proposal and implementation plan.\n\nKey changes needed:\n1. Add findByExternalRef() query function\n2. Update DetectCollisions() to match by external_ref first\n3. Update import_shared.go to update existing issues when external_ref matches\n4. Add index on external_ref for performance\n5. Preserve local issues (no external_ref) from being overwritten\n\nThis enables hybrid workflows: import external backlog, break down with local tasks, re-sync anytime.","notes":"## Code Review Complete ✅\n\n**Overall Assessment**: EXCELLENT - Production ready\n\n### Implementation Quality\n- ✓ Clean architecture with proper interface extension\n- ✓ Dual backend support (SQLite + Memory)\n- ✓ Smart matching priority: external_ref → ID → content hash\n- ✓ O(1) lookups with database index\n- ✓ Timestamp-based conflict resolution\n- ✓ Comprehensive test coverage (11 test cases)\n\n### Follow-up Issues Filed\nHigh Priority (P2):\n- bd-897a: Add UNIQUE constraint on external_ref column\n- bd-7315: Add validation for duplicate external_ref in batch imports\n\nMedium Priority (P3):\n- bd-f9a1: Add index usage verification test\n- bd-3f6a: Add concurrent import race condition tests\n\nLow Priority (P4):\n- bd-e166: Improve timestamp comparison readability\n- bd-9e23: Optimize Memory backend with index\n- bd-537e: Add external_ref change tracking\n- bd-df11: Add import metrics\n- bd-9f4a: Document external_ref in content hash\n\n### Key Features\n✅ External systems (Jira, GitHub, Linear) can re-sync without duplicates\n✅ Hybrid workflows: import external backlog, add local tasks, re-sync anytime\n✅ Local issues protected from being overwritten\n✅ Timestamp checking ensures only newer updates applied\n✅ Performance optimized with database index\n\n**Confidence Level**: 95% - Ship it! 🚀","status":"closed","priority":0,"issue_type":"feature","created_at":"2025-11-02T14:55:56.355813-08:00","updated_at":"2025-11-02T15:34:56.634126-08:00","closed_at":"2025-11-02T15:27:44.810375-08:00"}
 {"id":"bd-11e0","content_hash":"591db3f5674cf7f79b1f50d6b8d83fe60e495f02a21e181c9c63d8da88308d58","title":"Database import silently fails when daemon version != CLI version","description":"","status":"closed","priority":1,"issue_type":"bug","created_at":"2025-10-31T21:08:09.096749-07:00","updated_at":"2025-11-01T19:29:35.267817-07:00","closed_at":"2025-11-01T19:29:35.267817-07:00"}
 {"id":"bd-1231","content_hash":"94139e31b3a3e58086ea77a916173a6f0c372a66a21925af0b9385de2f387c2f","title":"CI failing on all 3/4 test jobs despite individual tests passing","description":"CI has been broken for a day+ with mysterious test failures. Issue #173 on GitHub tracks this.\n\n## Current Status\n- **Lint job**: ✅ PASSING\n- **Test (Linux)**: ❌ FAILING (exit code 1)\n- **Test (Windows)**: ❌ FAILING (exit code 1)\n- **Test Nix Flake**: ❌ FAILING (exit code 1)\n\n## Key Observations\nAll three failing jobs show identical pattern:\n- Individual test output shows PASS for every test\n- Final result: `FAIL github.com/steveyegge/beads/cmd/bd`\n- Exit code 1 despite no visible test failures\n- Last visible test output before failure: \"No Reason Issue\" test (TestCloseCommand/close_without_reason)\n\n## Investigation So Far\n1. All tests appear to pass when examined individually\n2. Likely causes:\n   - Race detector finding data races during test cleanup (`-race` flag)\n   - Panic/error occurring after main tests complete\n   - Test harness issue not reporting actual failure\n   - Possible regression from PR #203 (dependency_type changes)\n\n## Recent CI Runs\n- Run 19015040655 (latest): 3/4 failing\n- Multiple recent commits tried to fix Windows/lint issues\n- Agent on rrnewton/beads fork attempting fixes (2/4 passing there)\n\n## Next Steps\n1. Run tests locally with `-race -v` to see full output\n2. Check for unreported test failures or panics\n3. Examine test cleanup/teardown code\n4. Review recent changes around close command tests\n5. Consider if race detector is too sensitive or catching real issues","notes":"## Progress Update\n\n### ✅ Fixed (commits 09bd4d3, 21a29bc)\n1. **Daemon auto-import** - Always recompute content_hash in importer to avoid stale hashes\n2. **TestScripts failures** - Added bd binary to PATH for shell subprocess tests\n3. **Test infrastructure** - Added .gitignore to test repos, fixed last_import_time metadata\n\n### ✅ CI Status (Run 19015638968)\n- **Test (Linux)**: ✅ SUCCESS - All tests passing\n- **Test (Windows)**: ❌ FAILURE - Pre-existing Windows test failures\n- **Test Nix Flake**: ❌ FAILURE - Build fails with same test errors\n- **Lint**: ❌ FAILURE - Pre-existing issue in migrate.go:647\n\n### ❌ Remaining Issues (not related to original bd-1231)\n\n**Windows failures:**\n- TestFindDatabasePathEnvVar\n- TestHashIDs_MultiCloneConverge  \n- TestHashIDs_IdenticalContentDedup\n- TestDatabaseReinitialization (5 subtests)\n- TestFindBeadsDir_NotFound\n- TestMetricsSnapshot/uptime\n\n**Lint failure:**\n- cmd/bd/migrate.go:647:37: cleanupWALFiles - result 0 (error) is always nil (unparam)\n\n**Nix failure:**\n- Build fails during test phase with same test errors\n\n### Next Steps\n1. Investigate Windows-specific test failures\n2. Fix linting issue in migrate.go\n3. Debug Nix build test failures","status":"closed","priority":0,"issue_type":"bug","created_at":"2025-11-02T08:42:16.142128-08:00","updated_at":"2025-11-02T12:32:00.15834-08:00","closed_at":"2025-11-02T12:32:00.158346-08:00","external_ref":"https://github.com/steveyegge/beads/issues/173"}
@@ -47,7 +47,7 @@
 {"id":"bd-317ddbbf","content_hash":"81a74ccf29037e5a780b12540a4059bab98b9a790a5a043a68118fc00a083cda","title":"Add BEADS_DAEMON_MODE flag handling","description":"Add environment variable BEADS_DAEMON_MODE (values: poll, events). Default to 'poll' for Phase 1. Wire into daemon startup to select runEventLoop vs runEventDrivenLoop.","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-28T16:20:02.433638-07:00","updated_at":"2025-10-30T17:12:58.224373-07:00","closed_at":"2025-10-28T12:31:47.819136-07:00"}
 {"id":"bd-31aab707","content_hash":"8f64a8dbcc5ed63bc73b7d91fca624527033265dc1c89a7775eb2f45b378f382","title":"Unit tests for FileWatcher","description":"Test watcher detects JSONL changes. Test git ref changes trigger import. Test debounce integration. Test watcher recovery from file removal/rename.","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-29T11:30:59.842317-07:00","updated_at":"2025-10-31T12:00:43.189591-07:00","closed_at":"2025-10-31T12:00:43.189591-07:00"}
 {"id":"bd-325da116","content_hash":"d7c5637527778c5c835f5e4b6e15fbd51a3476d6749ab3155b8aeac08a8ef339","title":"Fix N-way collision convergence","description":"Epic to fix the N-way collision convergence problem documented in n-way-collision-convergence.md.\n\n## Problem Summary\nThe current collision resolution implementation works correctly for 2-way collisions but does not converge for 3-way (and by extension N-way) collisions. TestThreeCloneCollision demonstrates this with reproducible failures.\n\n## Root Causes Identified\n1. Pairwise resolution doesn't scale - each clone makes local decisions without global context\n2. DetectCollisions modifies state during detection (line 83-86 in collision.go)\n3. No remapping history - can't track transitive remap chains (test-1 → test-2 → test-3)\n4. Import-time resolution is too late - happens after git merge\n\n## Solution Architecture\nReplace pairwise resolution with deterministic global N-way resolution using:\n- Content-addressable identity (content hashing)\n- Global collision resolution (sort all versions by hash)\n- Read-only detection phase (separate from modification)\n- Idempotent imports (content-first matching)\n\n## Success Criteria\n- TestThreeCloneCollision passes without skipping\n- All clones converge to identical content after final pull\n- No data loss (all issues present in all clones)\n- Works for N workers (test with 5+ clones)\n- Idempotent imports (importing same JSONL multiple times is safe)\n\n## Implementation Phases\nSee child issues for detailed breakdown of each phase.","status":"closed","priority":0,"issue_type":"epic","created_at":"2025-10-29T23:05:13.889079-07:00","updated_at":"2025-10-31T11:59:41.031668-07:00","closed_at":"2025-10-31T11:59:41.031668-07:00"}
-{"id":"bd-3396","content_hash":"6a08d7ec53648c967d0f4b1ce954aa8da05c97138108c49483d93180b1601c3d","title":"Add merge helper commands (bd sync --merge)","description":"Add commands to merge beads branch back to main.\n\nTasks:\n- Implement bd sync --merge command\n- Implement bd sync --status command\n- Implement bd sync --auto-merge (optional, for automation)\n- Detect merge conflicts and provide guidance\n- Show commit diff between branches\n- Verify main branch is clean before merge\n- Push merged changes to remote\n\nEstimated effort: 2-3 days","acceptance_criteria":"- bd sync --merge successfully merges beads branch\n- Conflicts detected with helpful error message\n- bd sync --status shows clear diff\n- Works with protected main (user must have push access)\n- Git history is clean (no unnecessary merge commits)","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.580873-08:00","updated_at":"2025-11-02T15:22:35.580873-08:00","dependencies":[{"issue_id":"bd-3396","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.376916-08:00","created_by":"stevey"}]}
+{"id":"bd-3396","content_hash":"66907b79181fce3d1b04dad20c240f37f3347be91f68e7d3fce8dabed1a9d81b","title":"Add merge helper commands (bd sync --merge)","description":"Add commands to merge beads branch back to main.\n\nTasks:\n- Implement bd sync --merge command\n- Implement bd sync --status command\n- Implement bd sync --auto-merge (optional, for automation)\n- Detect merge conflicts and provide guidance\n- Show commit diff between branches\n- Verify main branch is clean before merge\n- Push merged changes to remote\n\nEstimated effort: 2-3 days","acceptance_criteria":"- bd sync --merge successfully merges beads branch\n- Conflicts detected with helpful error message\n- bd sync --status shows clear diff\n- Works with protected main (user must have push access)\n- Git history is clean (no unnecessary merge commits)","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.580873-08:00","updated_at":"2025-11-02T15:35:17.004654-08:00","dependencies":[{"issue_id":"bd-3396","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.376916-08:00","created_by":"stevey"}]}
 {"id":"bd-36320a04","content_hash":"883eb385fa9eded3826008fa6db3b842cabb2ce0e93a23293449f65024303fb7","title":"Add mutation channel to internal/rpc/server.go","description":"Add mutationChan chan MutationEvent to Server struct. Emit events on CreateIssue, UpdateIssue, DeleteIssue, AddComment. Non-blocking send with default case for full channel.","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-29T19:42:29.860173-07:00","updated_at":"2025-10-31T18:31:27.928693-07:00","closed_at":"2025-10-31T18:31:27.928693-07:00"}
 {"id":"bd-36870264","content_hash":"fa3b422a3382fba9fe673a10145f6e787ca5c2f3c4966d84148dae89d1fa0e2e","title":"Enforce daemon singleton per workspace with file locking","description":"Agent in ~/src/wyvern discovered 4 simultaneous daemon processes running, causing infinite directory recursion (.beads/.beads/.beads/...). Each daemon used relative paths and created nested .beads/ directories.\n\nRoot cause: No singleton enforcement. Multiple `bd daemon` processes can start in same workspace.\n\nExpected: One daemon per workspace (each workspace = separate .beads/ dir with bd.sock)\nActual: Multiple daemons can run simultaneously in same workspace\n\nNote: Separate git clones = separate workspaces = separate daemons (correct). Git worktrees share .beads/ and have known limitations (documented, use --no-daemon).","design":"Use flock (file locking) on daemon socket or database file to enforce singleton:\n\n1. On daemon start, attempt exclusive lock on .beads/bd.sock or .beads/daemon.lock\n2. If lock held by another process, refuse to start (exit with clear error)\n3. Hold lock for lifetime of daemon process\n4. Release lock on daemon shutdown\n\nAlternative: Use PID file with stale detection (check if PID is still running)\n\nImplementation location: Daemon startup code in cmd/bd/ or internal/daemon/","acceptance_criteria":"1. Starting second daemon process in same workspace fails with clear error\n2. Test: Start daemon, attempt second start, verify failure\n3. Killing daemon releases lock, allowing new daemon to start\n4. No infinite .beads/ directory recursion possible\n5. Works correctly with auto-start mechanism","notes":"## Fix Summary\n\nSuccessfully prevented the nested .beads/.beads/ recursion bug by implementing two safeguards:\n\n1. **Path Canonicalization in FindDatabasePath()** (beads.go):\n   - Added filepath.Abs() + filepath.EvalSymlinks() to normalize all database paths\n   - Prevents relative path edge cases that create nested directories\n   - Ensures all daemons see the same canonical path\n\n2. **Nested Directory Detection** (daemon_lifecycle.go):\n   - Added explicit check for \".beads/.beads\" pattern in setupDaemonLock()\n   - Fails fast with clear error message if nested structure detected\n   - Provides user hints about proper usage\n\n## Root Cause\n\nThe daemon lock (added Oct 22, 2025) correctly prevents simultaneous daemons in the SAME workspace. However, when BEADS_DB used a relative path (e.g., \".beads/beads.db\") from inside the .beads directory, FindDatabasePath() would resolve it to a nested path creating a separate workspace:\n- First daemon: /workspace/.beads/beads.db\n- Second daemon from .beads/: /workspace/.beads/.beads/beads.db ← Different lock file!\n\n## Testing\n\nAll acceptance criteria passed:\n✅ 1. Second daemon start fails with \"daemon already running\" error\n✅ 2. Killing daemon releases lock, new daemon can start  \n✅ 3. No infinite .beads/ recursion possible (tested nested BEADS_DB path)\n✅ 4. Works with auto-start mechanism\n\nThe fix addresses the edge case while maintaining the existing lock mechanism's correctness.","status":"closed","priority":0,"issue_type":"bug","created_at":"2025-10-25T23:13:12.269549-07:00","updated_at":"2025-11-01T19:46:06.230339-07:00","closed_at":"2025-11-01T19:46:06.230339-07:00"}
 {"id":"bd-373c","content_hash":"2ee54c4542489d8d254d17a6fc2e2d581e99badd7a166b36799cdca4be94bcc6","title":"Daemon crashes silently when multiple .db files exist in .beads/","description":"When daemon detects multiple .db files (after filtering out .backup and vc.db files), it writes error details to .beads/daemon-error file before exiting.\n\nThe error file is checked when:\n1. Daemon discovery fails to connect (internal/daemon/discovery.go)\n2. Auto-start fails to yield a running daemon (cmd/bd/main.go)\n3. Daemon list shows 'daemon not responding' error\n\nThis makes the error immediately visible to users without requiring them to check daemon logs.\n\nFile created:  cmd/bd/daemon.go (writes daemon-error on multiple .db detection)\nFiles modified: \n- internal/daemon/discovery.go (reads daemon-error and surfaces in DaemonInfo.Error)\n- cmd/bd/main.go (displays daemon-error when auto-start fails)\n\nTesting: Create multiple .db files in .beads/, start daemon, verify error file created and shown in bd daemons list","notes":"Root cause: Daemon exits with os.Exit(1) when multiple .db files detected (daemon.go:1381), but error only goes to daemon log file. User sees 'daemon not responding' without knowing why.\n\nCurrent detection:\n- daemon.go filters out .backup and vc.db files\n- bd doctor detects multiple databases\n- Error message tells user to run 'bd init' or manually remove\n\nProblem: Error is not user-visible unless they check daemon logs.\n\nProposed fix options:\n1. Surface the error in 'bd info' and 'bd daemons list' output\n2. Add a hint in error messages to run 'bd doctor' when daemon fails\n3. Make daemon write error to a .beads/daemon-error file that gets checked\n4. Improve 'bd doctor' to run automatically when daemon is unhealthy","status":"closed","priority":0,"issue_type":"bug","created_at":"2025-10-31T21:08:03.389259-07:00","updated_at":"2025-11-01T11:13:48.029427-07:00","closed_at":"2025-11-01T11:13:48.029427-07:00","dependencies":[{"issue_id":"bd-373c","depends_on_id":"bd-2752a7a2","type":"discovered-from","created_at":"2025-10-31T21:08:03.390022-07:00","created_by":"stevey"}]}
@@ -79,7 +79,7 @@
 {"id":"bd-5aad5a9c","content_hash":"03aa8900fd0e6f4bd911364bb69d4446f239c6a5e9688f0fc4928f3de1259242","title":"Add TestNWayCollision for 5+ clones","description":"## Overview\nAdd comprehensive tests for N-way (5+) collision resolution to verify the solution scales beyond 3 clones.\n\n## Purpose\nWhile TestThreeCloneCollision validates the basic N-way case, we need to verify:\n1. Solution scales to arbitrary N\n2. Performance is acceptable with more clones\n3. Convergence time is bounded\n4. No edge cases in larger collision groups\n\n## Implementation Tasks\n\n### 1. Create TestFiveCloneCollision\nFile: beads_twoclone_test.go (or new beads_nway_test.go)\n\n```go\nfunc TestFiveCloneCollision(t *testing.T) {\n    // Test with 5 clones creating same ID with different content\n    // Verify all 5 clones converge after sync rounds\n    \n    t.Run(\"SequentialSync\", func(t *testing.T) {\n        testNCloneCollision(t, 5, \"A\", \"B\", \"C\", \"D\", \"E\")\n    })\n    \n    t.Run(\"ReverseSync\", func(t *testing.T) {\n        testNCloneCollision(t, 5, \"E\", \"D\", \"C\", \"B\", \"A\")\n    })\n    \n    t.Run(\"RandomSync\", func(t *testing.T) {\n        testNCloneCollision(t, 5, \"C\", \"A\", \"E\", \"B\", \"D\")\n    })\n}\n```\n\n### 2. Implement generalized testNCloneCollision\nGeneralize the 3-clone test to handle arbitrary N:\n\n```go\nfunc testNCloneCollision(t *testing.T, numClones int, syncOrder ...string) {\n    t.Helper()\n    \n    if len(syncOrder) != numClones {\n        t.Fatalf(\"syncOrder length (%d) must match numClones (%d)\", \n            len(syncOrder), numClones)\n    }\n    \n    tmpDir := t.TempDir()\n    \n    // Setup remote and N clones\n    remoteDir := setupBareRepo(t, tmpDir)\n    cloneDirs := make(map[string]string)\n    \n    for i := 0; i \u003c numClones; i++ {\n        name := string(rune('A' + i))\n        cloneDirs[name] = setupClone(t, tmpDir, remoteDir, name)\n    }\n    \n    // Each clone creates issue with same ID but different content\n    for name, dir := range cloneDirs {\n        createIssue(t, dir, fmt.Sprintf(\"Issue from clone %s\", name))\n    }\n    \n    // Sync in specified order\n    for _, name := range syncOrder {\n        syncClone(t, cloneDirs[name], name)\n    }\n    \n    // Final pull for convergence\n    for name, dir := range cloneDirs {\n        finalPull(t, dir, name)\n    }\n    \n    // Verify all clones have all N issues\n    expectedTitles := make(map[string]bool)\n    for i := 0; i \u003c numClones; i++ {\n        name := string(rune('A' + i))\n        expectedTitles[fmt.Sprintf(\"Issue from clone %s\", name)] = true\n    }\n    \n    for name, dir := range cloneDirs {\n        titles := getTitles(t, dir)\n        if !compareTitleSets(titles, expectedTitles) {\n            t.Errorf(\"Clone %s missing issues: expected %v, got %v\", \n                name, expectedTitles, titles)\n        }\n    }\n    \n    t.Log(\"✓ All\", numClones, \"clones converged successfully\")\n}\n```\n\n### 3. Add performance benchmarks\nTest convergence time and memory usage:\n\n```go\nfunc BenchmarkNWayCollision(b *testing.B) {\n    for _, n := range []int{3, 5, 10, 20} {\n        b.Run(fmt.Sprintf(\"N=%d\", n), func(b *testing.B) {\n            for i := 0; i \u003c b.N; i++ {\n                // Run N-way collision and measure time\n                testNCloneCollisionBench(b, n)\n            }\n        })\n    }\n}\n```\n\n### 4. Add convergence time tests\nVerify bounded convergence:\n\n```go\nfunc TestConvergenceTime(t *testing.T) {\n    // Test that convergence happens within expected rounds\n    // For N clones, should converge in at most N-1 sync rounds\n    \n    for n := 3; n \u003c= 10; n++ {\n        t.Run(fmt.Sprintf(\"N=%d\", n), func(t *testing.T) {\n            rounds := measureConvergenceRounds(t, n)\n            maxExpected := n - 1\n            if rounds \u003e maxExpected {\n                t.Errorf(\"Convergence took %d rounds, expected ≤ %d\", \n                    rounds, maxExpected)\n            }\n        })\n    }\n}\n```\n\n### 5. Add edge case tests\nTest boundary conditions:\n- All N clones have identical content (dedup works)\n- N-1 clones have same content, 1 differs\n- All N clones have unique content\n- Mix of collisions and non-collisions\n\n## Acceptance Criteria\n- TestFiveCloneCollision passes with all sync orders\n- All 5 clones converge to identical content\n- Performance is acceptable (\u003c 5 seconds for 5 clones)\n- Convergence time is bounded (≤ N-1 rounds)\n- Edge cases handled correctly\n- Benchmarks show scalability to 10+ clones\n\n## Files to Create/Modify\n- beads_twoclone_test.go or beads_nway_test.go\n- Add helper functions for N-clone setup\n\n## Testing Strategy\n\n### Test Matrix\n| N Clones | Sync Orders | Expected Result |\n|----------|-------------|-----------------|\n| 3        | A→B→C       | Pass            |\n| 3        | C→B→A       | Pass            |\n| 5        | A→B→C→D→E   | Pass            |\n| 5        | E→D→C→B→A   | Pass            |\n| 5        | Random      | Pass            |\n| 10       | Sequential  | Pass            |\n\n### Performance Targets\n- 3 clones: \u003c 2 seconds\n- 5 clones: \u003c 5 seconds\n- 10 clones: \u003c 15 seconds\n\n## Dependencies\n- Requires bd-cbed9619.5, bd-cbed9619.4, bd-cbed9619.3, bd-dcd6f14b to be completed\n- TestThreeCloneCollision must pass first\n\n## Success Metrics\n- All tests pass for N ∈ {3, 5, 10}\n- Convergence time scales linearly (O(N))\n- Memory usage reasonable (\u003c 100MB for 10 clones)\n- No data corruption or loss in any scenario","status":"closed","priority":2,"issue_type":"task","created_at":"2025-10-29T19:52:05.462747-07:00","updated_at":"2025-10-31T12:00:43.198413-07:00","closed_at":"2025-10-31T12:00:43.198413-07:00"}
 {"id":"bd-5b40a0bf","content_hash":"fd8a94f744b6504f677cc8e196c5a8d8b5d13b230200add5a8d9b7a54a537eb9","title":"Batch test 5","description":"","status":"closed","priority":2,"issue_type":"task","created_at":"2025-10-29T15:29:02.136118-07:00","updated_at":"2025-10-31T12:00:43.181513-07:00","closed_at":"2025-10-31T12:00:43.181513-07:00"}
 {"id":"bd-5b6e","content_hash":"f82a86b4aae21311f23c8511a242f16e96d03836300995fadd43b8bea945cefa","title":"Add tests for helper functions (GetDirtyIssueHash, GetAllDependencyRecords, export hashes)","description":"Several utility functions have 0% coverage:\n- GetDirtyIssueHash (dirty.go)\n- GetAllDependencyRecords (dependencies.go)\n- GetExportHash, SetExportHash, ClearAllExportHashes (hash.go)\n\nThese are lower priority but should have basic coverage.","status":"open","priority":4,"issue_type":"task","created_at":"2025-11-01T22:40:58.989976-07:00","updated_at":"2025-11-01T22:40:58.989976-07:00"}
-{"id":"bd-5ce8","content_hash":"8371b74c06781a932c57c6b89a9803804d8e73e5b1abdaa5055d53197684457d","title":"Document protected branch workflow","description":"Create comprehensive documentation for protected branch workflow.\n\nTasks:\n- Add \"Protected Branch Workflow\" section to AGENTS.md\n- Create docs/PROTECTED_BRANCHES.md guide\n- Update README.md quick start\n- Add examples to examples/protected-branch/\n- Update bd init --help documentation\n- Add troubleshooting guide\n- Add migration guide for existing users\n- Record demo video (optional)\n\nEstimated effort: 2-3 days","acceptance_criteria":"- Clear quick start (\u003c 2 minutes to set up)\n- Detailed guide covers all scenarios\n- Examples work end-to-end\n- Troubleshooting answers common questions\n- Platform-agnostic (not GitHub-specific)","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.59013-08:00","updated_at":"2025-11-02T15:22:35.59013-08:00","dependencies":[{"issue_id":"bd-5ce8","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.379767-08:00","created_by":"stevey"}]}
+{"id":"bd-5ce8","content_hash":"784306c9d6e3b26d43a84bcd8c8b95c78ad860b73ba9fd8707688adba2970ffb","title":"Document protected branch workflow","description":"Create comprehensive documentation for protected branch workflow.\n\nTasks:\n- Add \"Protected Branch Workflow\" section to AGENTS.md\n- Create docs/PROTECTED_BRANCHES.md guide\n- Update README.md quick start\n- Add examples to examples/protected-branch/\n- Update bd init --help documentation\n- Add troubleshooting guide\n- Add migration guide for existing users\n- Record demo video (optional)\n\nEstimated effort: 2-3 days","acceptance_criteria":"- Clear quick start (\u003c 2 minutes to set up)\n- Detailed guide covers all scenarios\n- Examples work end-to-end\n- Troubleshooting answers common questions\n- Platform-agnostic (not GitHub-specific)","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.59013-08:00","updated_at":"2025-11-02T15:35:17.004981-08:00","dependencies":[{"issue_id":"bd-5ce8","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.379767-08:00","created_by":"stevey"}]}
 {"id":"bd-5dae5504","content_hash":"4f2b5a203d6a7b5e38176dd6ef68afb4b7d0e11889718381e28bf006f4e83a16","title":"Export deduplication breaks when JSONL and export_hashes table diverge","description":"## Problem\n\nThe export deduplication feature (timestamp-only skipping) breaks when the JSONL file and export_hashes table get out of sync, causing exports to skip issues that aren't actually in the file.\n\n## Symptoms\n\n- `bd export` reports \"Skipped 128 issue(s) with timestamp-only changes\"\n- JSONL file only has 38 lines but DB has 149 issues\n- export_hashes table has 149 entries\n- Auto-import doesn't trigger (hash matches despite missing data)\n- Two repos on same commit show different issue counts\n\n## Root Cause\n\nshouldSkipExport() in autoflush.go compares current issue hash with stored export_hashes entry. If they match, it skips export assuming the issue is already in the JSONL.\n\nThis assumption fails when:\n1. Git operations (pull, reset, checkout) change JSONL without clearing export_hashes\n2. Manual JSONL edits or corruption\n3. Import operations that modify DB but don't update export_hashes\n4. Partial exports that update export_hashes but don't complete\n\n## Impact\n\n- **Critical data loss risk**: Issues appear to be tracked but aren't persisted to git\n- Breaks multi-repo sync (root cause of today's debugging session)\n- Auto-import fails to detect staleness (hash matches despite missing data)\n- Silent data corruption (no error messages, just missing issues)\n\n## Reproduction\n\n1. Have DB with 149 issues, all in export_hashes table\n2. Truncate JSONL to 38 lines (simulate git reset or corruption)\n3. Run `bd export` - it skips 128 issues\n4. JSONL still has only 38 lines but export thinks it succeeded\n\n## Current Workaround\n\n```bash\nsqlite3 .beads/beads.db \"DELETE FROM export_hashes\"\nbd export -o .beads/beads.jsonl\n```\n\n## Proposed Solutions\n\n**Option 1: Verify JSONL integrity before skipping**\n- Count lines in JSONL, compare with export_hashes count\n- If mismatch, clear export_hashes and force full export\n- Safe but adds I/O overhead\n\n**Option 2: Hash-based JSONL validation**\n- Store hash of entire JSONL file in metadata\n- Before export, check if JSONL hash matches\n- If mismatch, clear export_hashes\n- More efficient, detects any JSONL corruption\n\n**Option 3: Disable timestamp-only deduplication**\n- Remove the feature entirely\n- Always export all issues\n- Simplest and safest, but creates larger git commits\n\n**Option 4: Clear export_hashes on git operations**\n- Add post-merge hook to clear export_hashes\n- Clear on any import operation\n- Defensive approach but may over-clear\n\n## Recommended Fix\n\nCombination of Options 2 + 4:\n1. Store JSONL file hash in metadata after export\n2. Check hash before export, clear export_hashes if mismatch  \n3. Clear export_hashes on import operations\n4. Add `bd validate` check for JSONL/export_hashes sync\n\n## Files Involved\n\n- cmd/bd/autoflush.go (shouldSkipExport)\n- cmd/bd/export.go (export with deduplication)\n- internal/storage/sqlite/metadata.go (export_hashes table)","notes":"## Recovery Session (2025-10-29 21:30)\n\n### What Happened\n- Created 14 new hash ID issues (bd-f8b764c9 through bd-f8b764c9.1) \n- bd sync appeared to succeed\n- Canonical repo (~/src/beads): 162 issues in DB + JSONL ✓\n- Secondary repo (fred/beads): Only 145 issues vs 162 in canonical ✗\n- Both repos on same git commit but different issue counts!\n\n### Bug Manifestation During Recovery\n\n1. **Initial state**: fred/beads had 145 issues, 145 lines in JSONL, 145 export_hashes entries\n\n2. **After git reset --hard origin/main**: \n   - JSONL: 162 lines (from git)\n   - DB: 150 issues (auto-import partially worked)\n   - Auto-import failed with UNIQUE constraint error\n\n3. **After manual import --resolve-collisions**:\n   - DB: 160 issues\n   - JSONL: Still 162 lines\n   - export_hashes: 159 entries\n\n4. **After bd export**: \n   - **JSONL reduced to 17 lines!** ← The bug in action\n   - export_hashes: 159 entries (skipped exporting 142 issues)\n   - Silent data loss - no error message\n\n5. **After clearing export_hashes and re-export**:\n   - JSONL: 159 lines (missing 3 issues still)\n   - DB: 159 issues\n   - Still diverged from canonical\n\n### The Bug Loop\nOnce export_hashes and JSONL diverge:\n- Export skips issues already in export_hashes\n- But those issues aren't actually in JSONL\n- This creates corrupt JSONL with missing issues\n- Auto-import can't detect the problem (file hash matches what was exported)\n- Data is lost with no error messages\n\n### Recovery Solution\nCouldn't break the loop with export alone. Had to:\n1. Copy .beads/beads.db from canonical repo\n2. Clear export_hashes\n3. Full re-export\n4. Finally converged to 162 issues\n\n### Key Learnings\n\n1. **The bug is worse than we thought**: It can create corrupt exports (17 lines instead of 162!)\n\n2. **Auto-import can't save you**: Once export is corrupt, auto-import just imports the corrupt data\n\n3. **Silent failure**: No warnings, no errors, just missing issues\n\n4. **Git operations trigger it**: git reset, git pull, etc. change JSONL without clearing export_hashes\n\n5. **Import operations populate export_hashes**: Even manual imports update export_hashes, setting up future export failures\n\n### Immediate Action Required\n\n**DISABLE EXPORT DEDUPLICATION NOW**\n\nThis feature is fundamentally broken and causes data loss. Should be disabled until properly fixed.\n\nQuick fix options:\n- Set environment variable to disable feature\n- Comment out shouldSkipExport check\n- Always clear export_hashes before export\n- Add validation that DB count == JSONL line count before allowing export\n\n### Long-term Fix\n\nNeed Option 2 + 4 from proposed solutions:\n1. Store JSONL file hash after every successful export\n2. Before export, verify JSONL hash matches expected\n3. If mismatch, log WARNING and clear export_hashes\n4. Clear export_hashes on every import operation\n5. Add git post-merge hook to clear export_hashes\n6. Add `bd validate` command to detect divergence\n","status":"closed","priority":0,"issue_type":"bug","created_at":"2025-10-29T23:05:13.959435-07:00","updated_at":"2025-10-30T17:12:58.207148-07:00","closed_at":"2025-10-29T21:57:03.06641-07:00"}
 {"id":"bd-5e1f","content_hash":"3e3467773e73eb9dbb8dd8f213be7157c27d72b53c6cc9776616154db96c3864","title":"Issue with desc","description":"This is a description","status":"open","priority":2,"issue_type":"bug","created_at":"2025-10-31T21:41:11.128718-07:00","updated_at":"2025-10-31T21:41:11.128718-07:00"}
 {"id":"bd-5f26","content_hash":"75bc96be4d465a5eb39bdf0b636c42cdd7b8ac7daf90b47b7b2a015991b87512","title":"Refactor daemon.go into internal/daemonrunner","description":"Extract daemon runtime from daemon.go (1,565 lines) into internal/daemonrunner with focused modules: config.go, daemon.go, process.go, rpc_server.go, sync.go, git.go. Keep cobra command thin.","design":"New structure:\n- internal/daemonrunner/config.go: Config struct\n- internal/daemonrunner/daemon.go: Daemon struct + Start/Stop\n- internal/daemonrunner/process.go: PID/lock/socket handling\n- internal/daemonrunner/rpc_server.go: RPC lifecycle\n- internal/daemonrunner/sync.go: Export/import/commit/push logic\n- internal/daemonrunner/git.go: Git operations interface\n- cmd/bd/daemon.go: Thin cobra command","status":"closed","priority":1,"issue_type":"epic","created_at":"2025-11-01T11:41:14.821017-07:00","updated_at":"2025-11-01T21:44:44.507747-07:00","closed_at":"2025-11-01T21:44:44.507747-07:00"}
@@ -92,7 +92,7 @@
 {"id":"bd-64c05d00.1","content_hash":"0744c30a5397c6c44b949c038af110eaf6453ec3800bff55cb027eecc47ab5b5","title":"Fix TestTwoCloneCollision to compare content not timestamps","description":"The test at beads_twoclone_test.go:204-207 currently compares full JSON output including timestamps, causing false negative failures.\n\nCurrent behavior:\n- Both clones converge to identical semantic content\n- Clone A: test-2=\"Issue from clone A\", test-1=\"Issue from clone B\"\n- Clone B: test-1=\"Issue from clone B\", test-2=\"Issue from clone A\"\n- Titles match IDs correctly, no data corruption\n- Only timestamps differ (expected and acceptable)\n\nFix needed:\n- Replace exact JSON comparison with content-aware comparison\n- Normalize or ignore timestamp fields when asserting convergence\n- Test should PASS after this fix\n\nThis blocks completion of bd-71107098.","acceptance_criteria":"- Test compares issue content (title, description, status, priority) not timestamps\n- TestTwoCloneCollision passes\n- Both clones shown to have identical semantic content\n- Timestamps explicitly documented as acceptable difference","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-28T17:58:52.057194-07:00","updated_at":"2025-10-30T17:12:58.226744-07:00","closed_at":"2025-10-28T18:01:38.751895-07:00","dependencies":[{"issue_id":"bd-64c05d00.1","depends_on_id":"bd-64c05d00","type":"parent-child","created_at":"2025-10-28T17:58:52.058202-07:00","created_by":"stevey"},{"issue_id":"bd-64c05d00.1","depends_on_id":"bd-71107098","type":"blocks","created_at":"2025-10-28T17:58:52.05873-07:00","created_by":"stevey"}]}
 {"id":"bd-64c05d00.2","content_hash":"b86d4c406dd6783a00683a31c8729ea08e846e0ddbc54211e1e3d6dedb96def4","title":"Document 3-clone ID non-determinism in collision resolution","description":"Document the known behavior of 3+ way collision resolution where ID assignments may vary based on sync order, even though content always converges correctly.\n\nUpdates needed:\n- Update bd-71107098 notes to mark 2-clone case as solved\n- Document 3-clone ID non-determinism as known limitation\n- Add explanation to ADVANCED.md or collision resolution docs\n- Explain why this happens (pairwise hash comparison is deterministic, but multi-way ID allocation uses sync-order dependent counters)\n- Clarify trade-offs: content convergence ✅ vs ID stability ❌\n\nKey points to document:\n- Hash-based resolution is pairwise deterministic\n- Content always converges correctly (all issues present with correct data)\n- Numeric ID assignments in 3+ way collisions depend on sync order\n- This is acceptable for most use cases (content convergence is primary goal)\n- Full determinism would require complex multi-way comparison","acceptance_criteria":"- bd-71107098 updated with notes about 2-clone solution being complete\n- 3-clone ID non-determinism documented in ADVANCED.md or similar\n- Explanation includes why it happens and trade-offs\n- Links to TestThreeCloneCollision as demonstration\n- Users understand this is expected behavior, not a bug","status":"open","priority":2,"issue_type":"task","created_at":"2025-10-28T17:59:21.93014-07:00","updated_at":"2025-10-30T17:12:58.227375-07:00","dependencies":[{"issue_id":"bd-64c05d00.2","depends_on_id":"bd-64c05d00","type":"parent-child","created_at":"2025-10-28T17:59:21.938709-07:00","created_by":"stevey"}]}
 {"id":"bd-64c05d00.3","content_hash":"e006b991353a26f949bc3ae4476849ef785f399f6aca866586eb6fa03d243b35","title":"Add TestThreeCloneCollision for regression protection","description":"Add a 3-clone collision test to document behavior and provide regression protection.\n\nPurpose:\n- Verify content convergence regardless of sync order\n- Document the ID non-determinism behavior (IDs may be assigned differently based on sync order)\n- Provide regression protection for multi-way collisions\n\nTest design:\n- 3 clones create same ID with different content\n- Test two different sync orders (A→B→C vs C→A→B)\n- Assert content sets match (ignore specific ID assignments)\n- Add comment explaining ID non-determinism is expected behavior\n\nKnown limitation:\n- Content always converges correctly (all issues present with correct titles)\n- Numeric ID assignments (test-2 vs test-3) depend on sync order\n- This is acceptable if content convergence is the primary goal","acceptance_criteria":"- TestThreeCloneCollision added to beads_twoclone_test.go (or new file)\n- Tests 3 clones with same ID collision\n- Tests two different sync orders\n- Asserts content convergence (all issues present, correct titles)\n- Documents ID non-determinism in test comments\n- Test passes consistently","status":"closed","priority":2,"issue_type":"task","created_at":"2025-10-28T17:59:05.941735-07:00","updated_at":"2025-10-30T17:12:58.227089-07:00","closed_at":"2025-10-28T18:09:12.717604-07:00","dependencies":[{"issue_id":"bd-64c05d00.3","depends_on_id":"bd-64c05d00","type":"parent-child","created_at":"2025-10-28T17:59:05.942783-07:00","created_by":"stevey"}]}
-{"id":"bd-6545","content_hash":"92ec1ea48d179ecf7cdd028b740422438a4c87e63e74e9e02425580ea9775429","title":"Update daemon commit logic for separate branch","description":"Modify daemon to use worktree for commits when sync.branch configured.\n\nTasks:\n- Update internal/daemon/server_export_import_auto.go\n- Detect sync.branch configuration\n- Ensure worktree exists before commit\n- Sync JSONL to worktree\n- Commit in worktree context\n- Push to configured branch\n- Fallback to current behavior if sync.branch not set\n- Handle git errors (network, permissions, conflicts)\n\nEstimated effort: 3-4 days","acceptance_criteria":"- When sync.branch configured, commits go to separate branch\n- When sync.branch not configured, commits to current branch (backward compatible)\n- No disruption to primary worktree\n- Git errors handled gracefully with retry\n- Daemon logs show which branch was used","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.598861-08:00","updated_at":"2025-11-02T15:22:35.598861-08:00","dependencies":[{"issue_id":"bd-6545","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.375661-08:00","created_by":"stevey"}]}
+{"id":"bd-6545","content_hash":"b272abdc59322459297ccbb9e50be1b0ff14e17a3b19d954a36d509db80cee4e","title":"Update daemon commit logic for separate branch","description":"Modify daemon to use worktree for commits when sync.branch configured.\n\nTasks:\n- Update internal/daemon/server_export_import_auto.go\n- Detect sync.branch configuration\n- Ensure worktree exists before commit\n- Sync JSONL to worktree\n- Commit in worktree context\n- Push to configured branch\n- Fallback to current behavior if sync.branch not set\n- Handle git errors (network, permissions, conflicts)\n\nEstimated effort: 3-4 days","acceptance_criteria":"- When sync.branch configured, commits go to separate branch\n- When sync.branch not configured, commits to current branch (backward compatible)\n- No disruption to primary worktree\n- Git errors handled gracefully with retry\n- Daemon logs show which branch was used","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.598861-08:00","updated_at":"2025-11-02T15:35:17.00527-08:00","dependencies":[{"issue_id":"bd-6545","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.375661-08:00","created_by":"stevey"}]}
 {"id":"bd-69bce74a","content_hash":"1eb7b7d60d3be1dcae7ff1e8053b4c9e7dfdfb70f200151c9298be0bb4d5dc72","title":"Platform tests: Linux, macOS, Windows","description":"Test event-driven mode on all platforms. Verify inotify (Linux), FSEvents (macOS), ReadDirectoryChangesW (Windows). Test fallback behavior on each.","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-29T19:42:29.85636-07:00","updated_at":"2025-10-30T17:12:58.193697-07:00","closed_at":"2025-10-29T15:33:22.149551-07:00"}
 {"id":"bd-69fbe98e","content_hash":"b9211785e5423ab62d313590115309dab023b0c418b8d06f8bf98442c1ff740d","title":"Implement \"bd daemons logs\" subcommand","description":"Add command to view daemon logs for a specific workspace. Requires daemon logging to file (may need separate issue for log infrastructure).","status":"open","priority":2,"issue_type":"task","created_at":"2025-10-26T19:41:11.099659-07:00","updated_at":"2025-10-30T17:12:58.186556-07:00"}
 {"id":"bd-6ada971e","content_hash":"3979df7395526a6796508aa1ed1e89c4fedc46ee5c2b79dd85066c8a78c8487a","title":"Create cmd/bd/daemon_event_loop.go (~200 LOC)","description":"Implement runEventDrivenLoop to replace polling ticker. Coordinate FileWatcher, mutation events, debouncer. Include health check ticker (60s) for daemon validation.","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-28T16:20:02.429383-07:00","updated_at":"2025-10-30T17:12:58.220612-07:00","closed_at":"2025-10-28T12:30:44.067036-07:00"}
@@ -144,7 +144,7 @@
 {"id":"bd-a101","content_hash":"805d60a6f4d9205a7e0498f63e9c0bd98a36eb86800304a123cd9122f694b5ab","title":"Support separate branch for beads commits","description":"Allow beads to commit to a separate branch (e.g., beads-metadata) using git worktrees to support protected main branch workflows.\n\nSolves GitHub Issue #205 - Users need to protect main branch while maintaining beads workflow.\n\nKey advantages:\n- Works on any git platform\n- Main branch stays protected  \n- No disruption to user's working directory\n- Backward compatible (opt-in via config)\n- Minimal disk overhead (sparse checkout)\n\nTotal estimate: 17-24 days (4-6 weeks with parallel work)","status":"in_progress","priority":1,"issue_type":"epic","created_at":"2025-11-02T15:21:20.098247-08:00","updated_at":"2025-11-02T15:25:01.743521-08:00","external_ref":"GH-205"}
 {"id":"bd-a1691807","content_hash":"23f0119ee9df98f1bf6d648dba06065c156963064ef1c7308dfb02c8bdd5bc58","title":"Integration test: mutation to export latency","description":"Measure time from bd create to JSONL update. Verify \u003c500ms latency. Test with multiple rapid mutations to verify batching.","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-29T20:49:49.105247-07:00","updated_at":"2025-10-31T12:00:43.198883-07:00","closed_at":"2025-10-31T12:00:43.198883-07:00"}
 {"id":"bd-a40f374f","content_hash":"599448515198700decd2494cf0cea3335b013c573bdcbda90a151564585cf845","title":"bd validate - Comprehensive health check","description":"Run all validation checks in one command.\n\nChecks:\n- Duplicates\n- Orphaned dependencies\n- Test pollution\n- Git conflicts\n\nSupports --fix-all for auto-repair.\n\nDepends on bd-cbed9619.1, bd-0dcea000, bd-31aab707, bd-9826b69a.\n\nFiles: cmd/bd/validate.go (new)","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-29T20:02:47.956664-07:00","updated_at":"2025-10-30T17:12:58.195108-07:00","closed_at":"2025-10-29T20:02:15.318966-07:00"}
-{"id":"bd-a4b5","content_hash":"f50d11e237402850f74a39281dbc7bfb83da2a4648442ffac620ba806434543f","title":"Implement git worktree management","description":"Create git worktree lifecycle management for separate beads branch.\n\nTasks:\n- Create internal/git/worktree.go\n- Implement CreateBeadsWorktree(branch, path)\n- Implement RemoveBeadsWorktree(path)\n- Implement CheckWorktreeHealth(path)\n- Configure sparse checkout (only .beads/)\n- Implement SyncJSONLToWorktree()\n- Handle worktree errors gracefully\n- Auto-cleanup on config change\n\nEstimated effort: 3-4 days","acceptance_criteria":"- Worktree created successfully on first use\n- Sparse checkout limits to .beads/ only\n- Health check detects and fixes broken worktrees\n- JSONL synced correctly before commits\n- Cleanup removes worktree completely","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.56423-08:00","updated_at":"2025-11-02T15:22:35.56423-08:00","dependencies":[{"issue_id":"bd-a4b5","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.359843-08:00","created_by":"stevey"}]}
+{"id":"bd-a4b5","content_hash":"c536fc98a4e0dba1be7c690f74d3b2a01e99b1048e90e21d9f67ea1311a23913","title":"Implement git worktree management","description":"Create git worktree lifecycle management for separate beads branch.\n\nTasks:\n- Create internal/git/worktree.go\n- Implement CreateBeadsWorktree(branch, path)\n- Implement RemoveBeadsWorktree(path)\n- Implement CheckWorktreeHealth(path)\n- Configure sparse checkout (only .beads/)\n- Implement SyncJSONLToWorktree()\n- Handle worktree errors gracefully\n- Auto-cleanup on config change\n\nEstimated effort: 3-4 days","acceptance_criteria":"- Worktree created successfully on first use\n- Sparse checkout limits to .beads/ only\n- Health check detects and fixes broken worktrees\n- JSONL synced correctly before commits\n- Cleanup removes worktree completely","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.56423-08:00","updated_at":"2025-11-02T15:35:17.005559-08:00","dependencies":[{"issue_id":"bd-a4b5","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.359843-08:00","created_by":"stevey"}]}
 {"id":"bd-a5251b1a","content_hash":"1a158c823c7152ddd5dbd11e11df32a85b699a4f05bfd2effbf4c4a3655cca6b","title":"Test RPC mutation event","description":"","status":"closed","priority":2,"issue_type":"task","created_at":"2025-10-29T19:08:03.315443-07:00","updated_at":"2025-10-31T12:00:43.177494-07:00","closed_at":"2025-10-31T12:00:43.177494-07:00"}
 {"id":"bd-a5a8bec0","content_hash":"fb509cc456ea9de6000129ad7780e417d2f06361e577738709a9ccf1c3b1f3b1","title":"bd find-duplicates - AI-powered duplicate detection","description":"Find semantically duplicate issues.\n\nApproaches:\n1. Mechanical: Exact title/description matching\n2. Embeddings: Cosine similarity (cheap, scalable)\n3. AI: LLM-based semantic comparison (expensive, accurate)\n\nUses embeddings by default for \u003e100 issues.\n\nFiles: cmd/bd/find_duplicates.go (new)","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-29T19:42:29.853269-07:00","updated_at":"2025-10-30T17:12:58.193143-07:00","closed_at":"2025-10-29T16:43:30.367455-07:00"}
 {"id":"bd-a9699011","content_hash":"87d969cf57e247ebfac4f052a9ecbd1254bc55070b87b5ffb78a2b6ee2afddb6","title":"GH#146: No color showing in terminal for some users","description":"User reports color not working in macOS (Taho 26.0.1) with iTerm 3.6.4 and Terminal.app, despite color working elsewhere in terminal. Python rich and printf escape codes work.\n\nNeed to investigate:\n- Is NO_COLOR env var set?\n- Terminal type detection?\n- fatih/color library configuration\n- Does bd list show colors? bd ready? bd init?\n- What's the output of: echo $TERM, echo $NO_COLOR","status":"open","priority":2,"issue_type":"bug","created_at":"2025-10-24T22:26:36.22163-07:00","updated_at":"2025-10-30T17:12:58.2142-07:00","external_ref":"github:146"}
@@ -155,7 +155,7 @@
 {"id":"bd-b55e2ac2","content_hash":"44122b61b1dcd06407ecf36f57577ea72c5df6dc8cc2a8c1b173b37d16a10267","title":"Fix autoimport tests for content-hash collision scoring","description":"## Overview\nThree autoimport tests are failing after bd-cbed9619.4 because they expect behavior based on the old reference-counting collision resolution, but the system now uses deterministic content-hash scoring.\n\n## Failing Tests\n1. `TestAutoImportMultipleCollisionsRemapped` - expects local versions preserved\n2. `TestAutoImportAllCollisionsRemapped` - expects local versions preserved  \n3. `TestAutoImportCollisionRemapMultipleFields` - expects specific collision resolution behavior\n\n## Root Cause\nThese tests were written when ScoreCollisions used reference counting to determine which version to keep. Now it uses content-hash comparison (introduced in commit 2e87329), which produces different but deterministic results.\n\n## Example\nOld behavior: Issue with more references would be kept\nNew behavior: Issue with lexicographically lower content hash is kept\n\n## Solution\nUpdate each test to:\n1. Verify the new content-hash based behavior is correct\n2. Check that the remapped issue (not necessarily local/remote) has the expected content\n3. Ensure dependencies are preserved on the correct remapped issue\n\n## Acceptance Criteria\n- All three autoimport tests pass\n- Tests verify content-hash determinism (same collision always resolves the same way)\n- Tests check dependency preservation on remapped issues\n- Test documentation explains content-hash scoring expectations\n\n## Files to Modify\n- `cmd/bd/autoimport_collision_test.go`\n\n## Testing\nRun: `go test ./cmd/bd -run \"TestAutoImport.*Collision\" -v`","status":"open","priority":2,"issue_type":"task","created_at":"2025-10-28T19:17:28.358028-07:00","updated_at":"2025-10-30T17:12:58.179059-07:00"}
 {"id":"bd-b5a3","content_hash":"d58f635721d24b7761782f83df452a67f794080d2c41cb4f6fad2f27ef2cf0b6","title":"Extract Daemon struct and config into internal/daemonrunner","description":"Create internal/daemonrunner with Config struct and Daemon struct. Move daemon runtime logic from cmd/bd/daemon.go Run function into Daemon.Start/Stop methods.","notes":"Refactoring complete! Created internal/daemonrunner package with:\n- Config struct (config.go)\n- Daemon struct with Start/Stop methods (daemon.go)\n- RPC server lifecycle (rpc.go)\n- Sync loop implementation (sync.go)\n- Git operations (git.go)\n- Process management (process.go, flock_*.go)\n- Logger setup (logger.go)\n- Platform-specific signal handling (signals_*.go)\n- Database fingerprint validation (fingerprint.go)\n\nBuild succeeds and most daemon tests pass. Import functionality still delegated to cmd/bd (marked with TODO(bd-b5a3)).","status":"closed","priority":1,"issue_type":"task","created_at":"2025-11-01T11:41:14.843103-07:00","updated_at":"2025-11-01T20:23:46.475885-07:00","closed_at":"2025-11-01T20:23:46.475888-07:00"}
 {"id":"bd-b6b2","content_hash":"c7a641bdb4c98b14816e2d85ec09db6def89aa4918ad59f4c1f8f71c6a42c6d4","title":"Feature with design","description":"This is a description","design":"Use MVC pattern","acceptance_criteria":"All tests pass","status":"open","priority":2,"issue_type":"feature","created_at":"2025-10-31T21:40:34.612465-07:00","updated_at":"2025-10-31T21:40:34.612465-07:00"}
-{"id":"bd-b7d2","content_hash":"4bfea1b10633672c20b867de59290faa4368595ba46cffd99d1584b0471e4cfd","title":"Add sync.branch configuration","description":"Add configuration layer to support sync.branch setting via config file, environment variable, or CLI flag.\n\nTasks:\n- Add sync.branch field to config schema\n- Add BEADS_SYNC_BRANCH environment variable\n- Add --branch flag to bd init\n- Add bd config get/set sync.branch commands\n- Validation (branch name format, conflicts)\n- Config migration for existing users\n\nEstimated effort: 1-2 days","acceptance_criteria":"- Can set sync.branch via config file, env var, or CLI\n- bd config get sync.branch returns configured value\n- Invalid branch names rejected with clear error\n- Backward compatible (empty = current branch)","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.560141-08:00","updated_at":"2025-11-02T15:22:35.560141-08:00","dependencies":[{"issue_id":"bd-b7d2","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.356847-08:00","created_by":"stevey"}]}
+{"id":"bd-b7d2","content_hash":"103664edc1fbb842bd3891ba6e5b3498f77b085e2614c9356aa33b23d3aeb6ea","title":"Add sync.branch configuration","description":"Add configuration layer to support sync.branch setting via config file, environment variable, or CLI flag.\n\nTasks:\n- Add sync.branch field to config schema\n- Add BEADS_SYNC_BRANCH environment variable\n- Add --branch flag to bd init\n- Add bd config get/set sync.branch commands\n- Validation (branch name format, conflicts)\n- Config migration for existing users\n\nEstimated effort: 1-2 days","acceptance_criteria":"- Can set sync.branch via config file, env var, or CLI\n- bd config get sync.branch returns configured value\n- Invalid branch names rejected with clear error\n- Backward compatible (empty = current branch)","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.560141-08:00","updated_at":"2025-11-02T15:35:17.005829-08:00","dependencies":[{"issue_id":"bd-b7d2","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.356847-08:00","created_by":"stevey"}]}
 {"id":"bd-bc2c6191","content_hash":"533e56b8628e24229a4beb52f8683355f6ca699e34a73650bf092003d73c2957","title":"Audit Current Cache Usage","description":"Understand exactly what code depends on the storage cache","acceptance_criteria":"- Document showing all cache dependencies\n- Confirmation that removing cache won't break MCP\n- List of tests that need updating\n\nFiles to examine:\n- internal/rpc/server_cache_storage.go (cache implementation)\n- internal/rpc/client.go (how req.Cwd is set)\n- internal/rpc/server_*.go (all getStorageForRequest calls)\n- integrations/beads-mcp/ (MCP multi-repo logic)\n\nTasks:\n- Document all callers of getStorageForRequest()\n- Verify req.Cwd is only set by RPC client for database discovery\n- Confirm MCP server doesn't rely on multi-repo cache behavior\n- Check if any tests assume multi-repo routing\n- Review environment variables: BEADS_DAEMON_MAX_CACHE_SIZE, BEADS_DAEMON_CACHE_TTL, BEADS_DAEMON_MEMORY_THRESHOLD_MB","status":"open","priority":1,"issue_type":"task","created_at":"2025-10-27T23:02:43.506373-07:00","updated_at":"2025-10-31T20:36:49.334214-07:00"}
 {"id":"bd-bdaf24d5","content_hash":"6ccdbf2362d22fbbe854fdc666695a7488353799e1a5c49e6095b34178c9bcb4","title":"Final validation test","description":"","status":"closed","priority":2,"issue_type":"task","created_at":"2025-10-27T18:27:28.310533-07:00","updated_at":"2025-10-31T12:00:43.184995-07:00","closed_at":"2025-10-31T12:00:43.184995-07:00"}
 {"id":"bd-c01f","content_hash":"b183cc4d99f74e9314f67d927f1bd1255608632b47ce0352af97af5872275fec","title":"Implement bd stale command to find abandoned/forgotten issues","description":"Add bd stale command to surface issues that haven't been updated recently and may need attention.\n\nUse cases:\n- In-progress issues with no recent activity (may be abandoned)\n- Open issues that have been forgotten\n- Issues that might be outdated or no longer relevant\n\nQuery logic should find non-closed issues where updated_at exceeds a time threshold.\n\nShould support:\n- --days N flag (default 30-90 days)\n- --status filter (e.g., only in_progress)\n- --json output for automation\n\nReferences GitHub issue #184 where user expected this command to exist.","design":"Implementation approach:\n1. Add new command in cmd/bd/stale.go\n2. Query issues with: status != 'closed' AND updated_at \u003c (now - N days)\n3. Support filtering by status (open, in_progress, blocked)\n4. Default threshold: 30 days (configurable via --days)\n5. JSON output for agent consumption\n6. Order by updated_at ASC (oldest first)","status":"closed","priority":2,"issue_type":"epic","created_at":"2025-10-31T22:48:46.85435-07:00","updated_at":"2025-10-31T22:54:33.704492-07:00","closed_at":"2025-10-31T22:54:33.704492-07:00"}
@@ -163,7 +163,7 @@
 {"id":"bd-c825f867","content_hash":"27cecaa2dc6cdabb2ae77fd65fbf8dca8f4c536bdf140a13b25cdd16376c9845","title":"Add docs/architecture/event_driven.md","description":"Copy event_driven_daemon.md into docs/ folder. Add to documentation index.","status":"open","priority":2,"issue_type":"task","created_at":"2025-10-28T16:20:02.431399-07:00","updated_at":"2025-10-30T17:12:58.221939-07:00"}
 {"id":"bd-c947dd1b","content_hash":"79bd51b46b28bc16cfc19cd19a4dd4f57f45cd1e902b682788d355b03ec00b2a","title":"Remove Daemon Storage Cache","description":"The daemon's multi-repo storage cache is the root cause of stale data bugs. Since global daemon is deprecated, we only ever serve one repository, making the cache unnecessary complexity. This epic removes the cache entirely for simpler, more reliable direct storage access.","design":"For local daemon (single repository), eliminate the cache entirely:\n- Use s.storage field directly (opened at daemon startup)\n- Remove getStorageForRequest() routing logic\n- Remove server_cache_storage.go entirely (~300 lines)\n- Remove cache-related tests\n- Simplify Server struct\n\nBenefits:\n✅ No staleness bugs: Always using live SQLite connection\n✅ Simpler code: Remove ~300 lines of cache management\n✅ Easier debugging: Direct storage access, no cache indirection\n✅ Same performance: Cache was always 1 entry for local daemon anyway","acceptance_criteria":"- Daemon has no storage cache code\n- All tests pass\n- MCP integration works\n- No stale data bugs\n- Documentation updated\n- Performance validated","status":"closed","priority":1,"issue_type":"epic","created_at":"2025-10-28T10:50:15.126939-07:00","updated_at":"2025-10-30T17:12:58.21743-07:00","closed_at":"2025-10-28T10:49:53.612049-07:00"}
 {"id":"bd-c9a482db","content_hash":"35c1ad124187c21b4e8dae7db46ea5d00173d33234a9b815ded7dcf0ab51078e","title":"Add internal/ai package for AI-assisted repairs","description":"Add AI integration package to support AI-powered repair commands.\n\nProviders:\n- Anthropic (Claude)\n- OpenAI\n- Ollama (local)\n\nFeatures:\n- Conflict resolution analysis\n- Duplicate detection via embeddings\n- Configuration via env vars (BEADS_AI_PROVIDER, BEADS_AI_API_KEY, etc.)\n\nSee repair_commands.md lines 357-425 for design.","status":"open","priority":2,"issue_type":"task","created_at":"2025-10-28T19:37:55.722841-07:00","updated_at":"2025-10-30T17:12:58.180177-07:00"}
-{"id":"bd-caa9","content_hash":"aa97994c8474a1380ff7f9c9db681c6d6dda62839b1ddc13312a6813029b6404","title":"Migration tool for existing users","description":"Ensure smooth migration for existing users to separate branch workflow.\n\nTasks:\n- Add bd migrate --separate-branch command\n- Detect existing repos, migrate cleanly\n- Preserve git history\n- Add rollback mechanism\n- Test migration on beads' own repo (dogfooding)\n- Communication plan (GitHub discussion, docs)\n- Version compatibility checks\n\nEstimated effort: 2-3 days","acceptance_criteria":"- Existing users can migrate without data loss\n- Rollback works if migration fails\n- Clear communication about breaking changes (if any)\n- beads project itself migrated successfully (dogfooding)\n- Migration tested on 5+ real-world repos","status":"open","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.627388-08:00","updated_at":"2025-11-02T15:22:35.627388-08:00","dependencies":[{"issue_id":"bd-caa9","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.382619-08:00","created_by":"stevey"}]}
+{"id":"bd-caa9","content_hash":"f78e3f048259f85012a0b06ca7a5c50fcf3582a3b94083c1e1e0c19407403e4e","title":"Migration tool for existing users","description":"Ensure smooth migration for existing users to separate branch workflow.\n\nTasks:\n- Add bd migrate --separate-branch command\n- Detect existing repos, migrate cleanly\n- Preserve git history\n- Add rollback mechanism\n- Test migration on beads' own repo (dogfooding)\n- Communication plan (GitHub discussion, docs)\n- Version compatibility checks\n\nEstimated effort: 2-3 days","acceptance_criteria":"- Existing users can migrate without data loss\n- Rollback works if migration fails\n- Clear communication about breaking changes (if any)\n- beads project itself migrated successfully (dogfooding)\n- Migration tested on 5+ real-world repos","status":"in_progress","priority":1,"issue_type":"task","created_at":"2025-11-02T15:22:35.627388-08:00","updated_at":"2025-11-02T15:35:17.006098-08:00","dependencies":[{"issue_id":"bd-caa9","depends_on_id":"bd-a101","type":"parent-child","created_at":"2025-11-02T15:22:48.382619-08:00","created_by":"stevey"}]}
 {"id":"bd-cb64c226.1","content_hash":"0bfd0735c8985d3b3e4906e44f22b06fb24758c6d795188226e920bd8b3e7cf8","title":"Performance Validation","description":"Confirm no performance regression from cache removal","acceptance_criteria":"- Benchmarks show no significant regression\n- Document performance characteristics\n- Confirm single SQLite connection is reused\n\nBenchmarks: go test -bench=. -benchmem ./internal/rpc/...\n\nMetrics to track:\n- Request latency (p50, p99)\n- Throughput (requests/sec)\n- Memory usage\n- SQLite connection overhead\n\nExpected results:\n- Latency: Same or better (no cache overhead)\n- Throughput: Same (cache was always 1 entry)\n- Memory: Lower (no cache structs)\n- Connection overhead: Zero (single connection reused)","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-28T10:50:15.126019-07:00","updated_at":"2025-10-30T17:12:58.216721-07:00","closed_at":"2025-10-28T10:49:45.021037-07:00"}
 {"id":"bd-cb64c226.10","content_hash":"2dbe416cf266952236a03ed414e5f7f9eb5526d69b70d0821ca0d59b2bc22305","title":"Delete server_cache_storage.go","description":"Remove the entire cache implementation file (~286 lines)","acceptance_criteria":"- File deleted from repository\n- No compilation errors\n- No references to deleted functions\n\nFunctions being removed:\n- StorageCacheEntry struct\n- evictStaleStorage() - LRU eviction\n- evictCacheBasedOnMemory() - memory pressure eviction\n- getStorageForRequest() - cache lookup and routing\n- findDatabaseForCwd() - database discovery\n- evictStorageForRequest() - manual eviction","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-27T22:55:38.729299-07:00","updated_at":"2025-10-30T17:12:58.212391-07:00","closed_at":"2025-10-28T14:08:38.064592-07:00"}
 {"id":"bd-cb64c226.12","content_hash":"ed9fa6273973fb0c68d173564ab4814d360528f9bb035e78406a63875f8f6b43","title":"Remove Storage Cache from Server Struct","description":"Eliminate cache fields and use s.storage directly","acceptance_criteria":"- Server struct has no cache fields\n- NewServer() doesn't initialize cache\n- Start() doesn't run cache cleanup goroutines\n- Stop() only closes single s.storage\n\nChanges needed:\n- Remove cache-related fields from Server struct in server_core.go\n- Remove cache size/TTL parsing from env vars in NewServer()\n- Remove cleanup ticker goroutine from Start()\n- Remove cache cleanup logic from Stop()","status":"closed","priority":1,"issue_type":"task","created_at":"2025-10-27T22:55:25.474412-07:00","updated_at":"2025-10-30T17:12:58.211812-07:00","closed_at":"2025-10-28T14:08:38.061444-07:00"}