Daemon fails to auto-import after git pull updates JSONL

After git pull updates .beads/issues.jsonl, daemon doesn't automatically re-import changes, causing stale data to be shown until next sync cycle (up to 5 minutes).

Reproduction:
1. Repo A: Close issues, export, commit, push
2. Repo B: git pull (successfully updates .beads/issues.jsonl)
3. bd show <issue> shows OLD status from daemon's SQLite db
4. JSONL on disk has correct new status

Root cause: Daemon sync cycle runs on timer (5min). When user manually runs git pull, daemon doesn't detect JSONL was updated externally and continues serving stale data from SQLite.

Impact:
- High for AI agents using beads in git workflows
- Breaks fundamental git-as-source-of-truth model
- Confusing UX: git log shows commit, bd shows old state
- Data consistency issues between JSONL and daemon

See WYVERN_SYNC_ISSUE.md for full analysis.

**Fixed in v0.21.2!**

The daemon auto-import is fully implemented:
- internal/autoimport package handles staleness detection
- internal/importer package provides shared import logic (used by both CLI and daemon)
- daemon's checkAndAutoImportIfStale() calls autoimport.AutoImportIfNewer()
- importFunc uses importer.ImportIssues() with auto-rename enabled
- All tests passing

The critical data corruption bug is FIXED:
✅ After git pull, daemon detects JSONL is newer (mtime check)
✅ Daemon auto-imports before serving requests
✅ No stale data served
✅ No data loss in multi-agent workflows

Verification needed: Run two-repo test to confirm end-to-end behavior.


Review multi-repo deletion tracking implementation

Thoroughly review the multi-repo deletion tracking fix (bd-4oob):

Files changed:
- cmd/bd/deletion_tracking.go: Added getMultiRepoJSONLPaths() helper
- cmd/bd/daemon_sync.go: Updated snapshot capture/update logic for multi-repo
- cmd/bd/deletion_tracking_test.go: Added 2 new tests (287 lines)

Review focus areas:
1. Correctness: Does getMultiRepoJSONLPaths() handle all edge cases?
2. Performance: Calling getMultiRepoJSONLPaths() 3x per sync (snapshot capture, merge, base update) - should we cache?
3. Error handling: What if some repos fail snapshot operations but others succeed?
4. Race conditions: Multiple daemons in different repos?
5. Test coverage: Are TestMultiRepoDeletionTracking and TestMultiRepoSnapshotIsolation sufficient?
6. Path handling: Absolute vs relative paths, tilde expansion

This is fresh code - needs careful review before considering deletion tracking production-ready.

Code review completed. Overall assessment: Core deletion tracking logic is sound, but error handling and path handling issues make this not yet production-ready for multi-repo scenarios.

Key findings:

CRITICAL ISSUES (Priority 1):
1. Inconsistent error handling in daemon_sync.go - snapshot/merge fail hard but base update warns. Can leave DB in inconsistent state with no rollback. See bd-sjmr.
2. No path normalization in getMultiRepoJSONLPaths() - tilde expansion, relative paths, duplicates not handled. See bd-iye7.

SHOULD FIX (Priority 2):
3. Missing test coverage for edge cases - empty paths, duplicates, partial failures. See bd-kdoh.
4. Performance - getMultiRepoJSONLPaths() called 3x per sync (minor issue). See bd-we4p.

WHAT WORKS WELL:
- Atomic file operations with PID-based temp files
- Good snapshot isolation between repos
- Race condition protection via exclusive locks
- Solid test coverage for happy path scenarios

VERDICT: Address bd-iye7 and bd-sjmr before considering deletion tracking production-ready for multi-repo mode.

Detailed review notes available in conversation history.


Issue 1


Batch test 2


Test issue


Test child issue


Auto-detect scenarios and prompt users

Detect when user is in fork/contributor scenario and prompt with helpful suggestions. Check: git remote relationships, existing .beads config, repo ownership. Suggest appropriate wizard.


Extract daemon sync functions to daemon_sync.go


Add UNIQUE constraint on external_ref column

The external_ref column should have a UNIQUE constraint to prevent multiple issues from having the same external reference. This ensures data integrity when syncing from external systems (Jira, GitHub, Linear).

Current behavior:
- Multiple issues can have the same external_ref
- GetIssueByExternalRef returns first match (non-deterministic with duplicates)

Proposed solution:
- Add UNIQUE constraint to external_ref column
- Add migration to check for and resolve existing duplicates
- Update tests to verify constraint enforcement

Related: bd-1022


bd-hv01: Non-atomic snapshot operations can cause data loss

## Problem
In sync.go:146-155 and daemon_sync.go:502-505, snapshot capture failures are logged as warnings but sync continues:

```go
if err := exportToJSONL(ctx, jsonlPath); err != nil { ... }
if err := captureLeftSnapshot(jsonlPath); err != nil {
    fmt.Fprintf(os.Stderr, "Warning: failed to capture snapshot...")
}
```

If export succeeds but snapshot capture fails, the merge uses stale snapshot data, potentially deleting wrong issues.

## Impact
- Critical data integrity issue
- Could delete issues incorrectly during multi-workspace sync

## Fix
Make snapshot capture mandatory:
```go
if err := captureLeftSnapshot(jsonlPath); err != nil {
    return fmt.Errorf("failed to capture snapshot (required for deletion tracking): %w", err)
}
```

## Files Affected
- cmd/bd/sync.go:146-155
- cmd/bd/daemon_sync.go:502-505


bd-hv01: Race condition with concurrent snapshot operations

## Problem
Snapshot files have no locking. Multiple processes can call captureLeftSnapshot simultaneously:

1. Process A: export → begins snapshot
2. Process B: export → begins snapshot
3. Process A: writes partial left.jsonl
4. Process B: overwrites with its left.jsonl
5. Process A: completes merge with wrong snapshot

## Impact
- Data corruption in multi-process scenarios
- Daemon + manual sync race
- Multiple git clones on same filesystem

## Fix
Use atomic file operations with process-specific temp files:
```go
func captureLeftSnapshot(jsonlPath string) error {
    _, leftPath := getSnapshotPaths(jsonlPath)
    tempPath := fmt.Sprintf("%s.%d.tmp", leftPath, os.Getpid())
    if err := copyFileSnapshot(jsonlPath, tempPath); err != nil {
        return err
    }
    return os.Rename(tempPath, leftPath) // Atomic on POSIX
}
```

## Files Affected
- cmd/bd/deletion_tracking.go:24-29 (captureLeftSnapshot)
- cmd/bd/deletion_tracking.go:31-36 (updateBaseSnapshot)


Add 'bd message send' command for Agent Mail messaging

Agent Mail server supports messaging between agents, but bd CLI only uses it for file reservations. Add commands for inter-agent messaging.

## Background
- Agent Mail server running at http://127.0.0.1:8765
- 12 workspaces configured across 3 channels (beads.dev, vc.dev, wyvern.dev)
- Current integration: file reservations only
- Gap: no way to send messages from bd CLI

## Proposed Commands

```bash
# Send message to another agent
bd message send <to-agent> <message> [options]
  --subject <subject>
  --thread-id <thread-id>     # Optional - group related messages
  --project-id <project>      # Defaults to BEADS_PROJECT_ID

# List inbox messages
bd message inbox [options]
  --limit <N>
  --unread-only

# Read specific message
bd message read <message-id>

# Mark message as acknowledged
bd message ack <message-id>
```

## Example Usage

```bash
# Send message to agent in same channel
bd message send cino-beads-stevey-macbook "Working on bd-z0yn, need your review" \
  --subject "Review request" \
  --thread-id bd-z0yn

# Check inbox
bd message inbox --unread-only

# Read and acknowledge
bd message read msg-abc123
bd message ack msg-abc123
```

## Design Notes
- Use same env vars (BEADS_AGENT_MAIL_URL, BEADS_AGENT_NAME, BEADS_PROJECT_ID)
- Graceful degradation if Agent Mail unavailable
- JSON output support for all commands
- Consider integrating with bd update/close (auto-notify on status changes)

## References
- Agent Mail README: ~/src/mcp_agent_mail/README.md
- Beads integration docs: docs/AGENT_MAIL.md

## Implementation Summary

Added four new commands to bd CLI for Agent Mail messaging:

1. `bd message send <to-agent> <message>` - Send messages to other agents
   - Flags: --subject, --thread-id, --importance, --ack-required
   - Supports markdown content
   - Thread conversations by issue ID

2. `bd message inbox` - List inbox messages
   - Flags: --limit, --unread-only, --urgent-only, --json
   - Shows subject, sender, age, importance
   - Highlights unread and ACK-required messages

3. `bd message read <message-id>` - Read and mark message as read
   - Automatically marks message as read
   - Shows message content

4. `bd message ack <message-id>` - Acknowledge a message
   - Marks message as acknowledged
   - Also marks as read if not already

## Implementation Details

- Uses JSON-RPC over HTTP to communicate with Agent Mail server
- Configuration via environment variables (BEADS_AGENT_MAIL_URL, BEADS_AGENT_NAME, BEADS_PROJECT_ID)
- Graceful error messages when Agent Mail not configured
- Full JSON output support for programmatic use
- Follows same patterns as existing bd commands

## Documentation

Updated:
- docs/AGENT_MAIL.md - Added "Messaging Commands" section with examples and best practices
- README.md - Added "Messaging (Agent Mail)" section in Usage

## Testing

- Compiles successfully
- Help output works correctly
- Ready for integration testing with Agent Mail server


Latency test


cmd/bd tests fail without -short flag (parallel test deadlock)


Add tests for Integration Layer Implementation

While implementing bd-wfmw, noticed missing tests

Reviewed existing coverage:
- Basic test coverage exists in lib/test_beads_mail_adapter.py
- Integration tests cover failure scenarios in tests/integration/test_mail_failures.py
- Good coverage of: enabled/disabled modes, graceful degradation, 409 conflicts, HTTP errors, config
- Missing: authorization headers detail, request body structure validation, concurrent reservation timing, TTL edge cases


bd-hv01: Storage backend extensibility broken by type assertion

Problem: deletion_tracking.go:69-82 uses type assertion for DeleteIssue which breaks if someone adds a new storage backend.

Fix: Check capability before starting merge or add DeleteIssue to Storage interface.

Files: cmd/bd/deletion_tracking.go:69-82, internal/storage/storage.go


Update python-agent example with Agent Mail integration

Modify examples/python-agent/agent.py to use Agent Mail adapter at 4 integration points.

Acceptance Criteria:
- Import and initialize adapter
- Check inbox before find_ready_work()
- Reserve issue before claim_task()
- Notify on status changes
- Release reservation on complete_task()
- Works identically when Agent Mail disabled
- No changes required to core Beads CLI

File: examples/python-agent/agent.py


Create Docker image for Agent Mail

Containerize Agent Mail server for easy deployment.

Acceptance Criteria:
- Dockerfile with Python 3.14
- Health check endpoint
- Volume mount for storage
- Environment variable configuration
- Multi-arch builds (amd64, arm64)

File: deployment/agent-mail/Dockerfile


Remove Cache Configuration Docs

Remove documentation of deprecated cache env vars


Implement bd upgrade subcommand with status/review/ack


Create Python adapter library

Create beads_mail_adapter.py library that wraps Agent Mail HTTP calls with health checks and graceful degradation.

Acceptance Criteria:
- AgentMailAdapter class with health check on init
- enabled flag auto-disables if server unreachable
- All methods wrapped in try/catch (non-blocking failures)
- Methods: reserve_issue(), release_issue(), notify(), check_inbox()
- Environment-based configuration (AGENT_MAIL_URL, AGENT_MAIL_TOKEN)
- Unit tests for enabled/disabled modes

File: lib/beads_mail_adapter.py


bd-hv01: Brittle string comparison breaks with JSON field reordering

## Problem
deletion_tracking.go:125 uses string comparison to detect unchanged issues:

```go
if leftLine, existsInLeft := leftIndex[id]; existsInLeft && leftLine == baseLine {
    deletions = append(deletions, id)
}
```

This breaks if:
- JSON field order changes (legal in JSON)
- Timestamps updated by import/export
- Whitespace/formatting changes
- Floating point precision varies

## Example Failure
```json
// baseLine
{"id":"bd-1","priority":1,"status":"open"}
// leftLine (same data, different order)
{"id":"bd-1","status":"open","priority":1}
```
These are semantically identical but string comparison fails.

## Fix
Parse and compare JSON semantically:
```go
func jsonEquals(a, b string) bool {
    var objA, objB map[string]interface{}
    json.Unmarshal([]byte(a), &objA)
    json.Unmarshal([]byte(b), &objB)
    return reflect.DeepEqual(objA, objB)
}
```

## Files Affected
- cmd/bd/deletion_tracking.go:125
- cmd/bd/deletion_tracking.go:134-170 (buildIDToLineMap)


bd init overwrites existing git hooks without detection or chaining

GH #254: bd init silently overwrites existing git hooks (like pre-commit framework) without detecting them, backing them up, or offering to chain. This breaks workflows and can result in committed code with failing tests.

Fix: Detect existing hooks, prompt user with options to chain/overwrite/skip.


Batch test 4


WASM port of bd for Claude Code Web sandboxes

Enable beads to work in Claude Code Web sandboxes by compiling bd to WebAssembly.

## Problem
Claude Code Web sandboxes cannot install bd CLI due to network restrictions:
- GitHub releases return 403
- go install fails with DNS errors
- Binary cannot be downloaded

## Solution
Compile bd Go codebase to WASM, publish to npm as drop-in replacement.

## Technical Approach
- Use GOOS=js GOARCH=wasm to compile bd
- modernc.org/sqlite already supports js/wasm target
- Publish to npm as bd-wasm package
- Full feature parity with bd CLI

## Success Criteria
- bd-wasm installs via npm in web sandbox
- All core bd commands work identically
- JSONL output matches native bd
- Performance within 2x of native

WASM port abandoned - Claude Code Web has full VMs not browser restrictions. Better: npm + native binary


Add programmatic tip injection API

Allow tips to be programmatically injected at runtime based on detected conditions. This enables dynamic tips (not just pre-defined ones) to be shown with custom priority and frequency.


Add --body-file flag to bd create for reading descriptions from files

## Problem

Creating issues with long/complex descriptions via CLI requires shell escaping gymnastics:

```bash
# Current workaround - awkward heredoc quoting
bd create --title="..." --description="$(cat <<'EOF'
...markdown...
EOF
)"

# Often fails with quote escaping errors in eval context
# Agents resort to writing temp files then reading them
```

## Proposed Solution

Add `--body-file` and `--description-file` flags to read description from a file, matching `gh` CLI pattern.

```bash
# Natural pattern that aligns with training data
cat > /tmp/desc.md << 'EOF'
...markdown content...
EOF

bd create --title="..." --body-file=/tmp/desc.md
```

## Implementation

### 1. Add new flags to `bd create`

```go
createCmd.Flags().String("body-file", "", "Read description from file (use - for stdin)")
createCmd.Flags().String("description-file", "", "Alias for --body-file")
```

### 2. Flag precedence

- If `--body-file` or `--description-file` is provided, read from file
- If value is `-`, read from stdin
- Otherwise fall back to `--body` or `--description` flag
- If neither provided, description is empty (current behavior)

### 3. Error handling

- File doesn't exist → clear error message
- File not readable → clear error message
- stdin specified but not available → clear error message

## Benefits

✅ **Matches training data**: `gh issue create --body-file file.txt` is a common pattern
✅ **No shell escaping issues**: File content is read directly
✅ **Works with any content**: Markdown, special characters, quotes, etc.
✅ **Agent-friendly**: Agents already write complex content to temp files
✅ **User-friendly**: Easier for humans too when pasting long descriptions

## Related Commands

Consider adding similar support to:
- `bd update --body-file` (for updating descriptions)
- `bd comment --body-file` (if/when we add comments)

## Examples

```bash
# From file
bd create --title="Add new feature" --body-file=feature.md

# From stdin
echo "Quick description" | bd create --title="Bug fix" --body-file=-

# With other flags
bd create \
  --title="Security issue" \
  --type=bug \
  --priority=0 \
  --body-file=security-report.md \
  --label=security
```

## Testing

- Test with normal files
- Test with stdin (`-`)
- Test with non-existent files (error handling)
- Test with binary files (should handle gracefully)
- Test with empty files (valid - empty description)
- Test that `--description-file` and `--body-file` are equivalent aliases


Add tests for merge driver auto-config in bd init

Add comprehensive tests for the merge driver auto-configuration functionality in `bd init`.

**Test cases needed:**
- Auto-install in quiet mode
- Skip with --skip-merge-driver flag
- Detect already-installed merge driver
- Append to existing .gitattributes
- Interactive prompt behavior (if feasible)

**File:** `cmd/bd/init_test.go`


Fix GH #227: bd edit broken pipe errors

bd edit command gets "broken pipe" errors when using daemon mode because editing can take minutes and the daemon connection times out.

Solution: Force bd edit to always use direct mode (--no-daemon) since it's human-only and interactive.

Fixed by checking cmd.Name() == "edit" in main.go PersistentPreRun and setting noDaemon = true.


Audit and standardize JSON output across all commands

Ensure consistent JSON format and error handling when --json flag is used.

**Scope:**
1. Verify all commands respect --json flag
2. Standardize success response format
3. Standardize error response format
4. Document JSON schemas

**Commands to audit:**
- Core CRUD: create, update, delete, show, list, search ✓
- Queries: ready, blocked, stale, count, stats, status
- Deps: dep add/remove/tree/cycles
- Labels: label commands
- Comments: comments add/list/delete
- Epics: epic status/close-eligible
- Export/import: already support --json ✓

**Testing:**
- Success cases return valid JSON
- Error cases return valid JSON (not plain text)
- Consistent field naming (snake_case vs camelCase)
- Array vs object wrapping consistency


Add TestThreeCloneCollision for regression protection

Add a 3-clone collision test to document behavior and provide regression protection.

Purpose:
- Verify content convergence regardless of sync order
- Document the ID non-determinism behavior (IDs may be assigned differently based on sync order)
- Provide regression protection for multi-way collisions

Test design:
- 3 clones create same ID with different content
- Test two different sync orders (A→B→C vs C→A→B)
- Assert content sets match (ignore specific ID assignments)
- Add comment explaining ID non-determinism is expected behavior

Known limitation:
- Content always converges correctly (all issues present with correct titles)
- Numeric ID assignments (test-2 vs test-3) depend on sync order
- This is acceptable if content convergence is the primary goal


Enforce daemon singleton per workspace with file locking

Agent in ~/src/wyvern discovered 4 simultaneous daemon processes running, causing infinite directory recursion (.beads/.beads/.beads/...). Each daemon used relative paths and created nested .beads/ directories.

Root cause: No singleton enforcement. Multiple `bd daemon` processes can start in same workspace.

Expected: One daemon per workspace (each workspace = separate .beads/ dir with bd.sock)
Actual: Multiple daemons can run simultaneously in same workspace

Note: Separate git clones = separate workspaces = separate daemons (correct). Git worktrees share .beads/ and have known limitations (documented, use --no-daemon).

## Fix Summary

Successfully prevented the nested .beads/.beads/ recursion bug by implementing two safeguards:

1. **Path Canonicalization in FindDatabasePath()** (beads.go):
   - Added filepath.Abs() + filepath.EvalSymlinks() to normalize all database paths
   - Prevents relative path edge cases that create nested directories
   - Ensures all daemons see the same canonical path

2. **Nested Directory Detection** (daemon_lifecycle.go):
   - Added explicit check for ".beads/.beads" pattern in setupDaemonLock()
   - Fails fast with clear error message if nested structure detected
   - Provides user hints about proper usage

## Root Cause

The daemon lock (added Oct 22, 2025) correctly prevents simultaneous daemons in the SAME workspace. However, when BEADS_DB used a relative path (e.g., ".beads/beads.db") from inside the .beads directory, FindDatabasePath() would resolve it to a nested path creating a separate workspace:
- First daemon: /workspace/.beads/beads.db
- Second daemon from .beads/: /workspace/.beads/.beads/beads.db ← Different lock file!

## Testing

All acceptance criteria passed:
✅ 1. Second daemon start fails with "daemon already running" error
✅ 2. Killing daemon releases lock, new daemon can start
✅ 3. No infinite .beads/ recursion possible (tested nested BEADS_DB path)
✅ 4. Works with auto-start mechanism

The fix addresses the edge case while maintaining the existing lock mechanism's correctness.


Test Agent Mail server failure scenarios

Verify graceful degradation across various failure modes.

Test Cases:
- Server never started
- Server crashes during operation
- Network partition (timeout)
- Server returns 500 error
- Invalid bearer token
- SQLite corruption

Acceptance Criteria:
- Agents continue working in all scenarios
- Clear log messages about degradation
- No crashes or data loss
- Beads JSONL remains consistent

File: tests/integration/test_mail_failures.py


Create shared insert/event/dirty helpers

Create issues.go (insertIssue/insertIssues), events.go (recordCreatedEvent/recordCreatedEvents), dirty.go (markDirty/markDirtyBatch). Refactor single and bulk create paths to use these.


Implement fs bridge layer for WASM (Go syscall/js to Node.js fs)

Go's os package in WASM returns 'not implemented on js' for mkdir and other file operations. Need to create a bridge layer that:

1. Detects WASM environment (GOOS=js)
2. Uses syscall/js to call Node.js fs module functions
3. Implements wrappers for:
   - os.MkdirAll
   - os.ReadFile / os.WriteFile
   - os.Open / os.Create
   - os.Stat / os.Lstat
   - filepath operations

Approach:
- Create internal/wasm/fs_bridge.go with //go:build js && wasm
- Export Node.js fs functions to Go using global.readFileSync, global.writeFileSync, etc.
- Wrap in Go API that matches os package signatures
- Update beads.go and storage layer to use bridge when in WASM

This unblocks bd-4462 (basic WASM testing) and [deleted:bd-5bbf] (feature parity testing).


Hash-based IDs with aliasing system

Replace sequential auto-increment IDs (bd-1c63eb84, bd-9063acda) with content-hash based IDs (bd-af78e9a2) plus human-friendly aliases (#1, #2).

## Motivation
Current sequential IDs cause collision problems when multiple clones work offline:
- Non-deterministic convergence in N-way scenarios (bd-cbed9619.1, bd-e6d71828)
- Complex collision resolution logic (~2,100 LOC)
- UNIQUE constraint violations during import
- Requires coordination between workers

Hash-based IDs eliminate collisions entirely while aliases preserve human readability.

## Benefits
- ✅ Collision-free distributed ID generation
- ✅ Eliminates ~2,100 LOC of collision handling code
- ✅ Better git merge behavior (different IDs = different JSONL lines)
- ✅ True offline-first workflows
- ✅ Simpler auto-import (no remapping needed)
- ✅ Enables parallel CI/CD workers without coordination

## Design
- Canonical ID: bd-af78e9a2 (8-char SHA256 prefix of title+desc+timestamp+creator)
- Alias: #42 (auto-increment per workspace, mutable, display-only)
- CLI accepts both: bd show bd-af78e9a2 OR bd show #42
- JSONL stores hash IDs only (aliases reconstructed on import)
- Alias conflicts resolved via content-hash ordering (deterministic)

## Breaking Change
This is a v2.0 feature requiring migration. Provide bd migrate --hash-ids tool.

## Timeline
~9 weeks (Phase 1: Hash IDs 4w, Phase 2: Aliases 3w, Phase 3: Testing 2w)

## Dependencies
Should complete after bd-7c5915ae (cleanup validation) and before bd-710a4916 (CRDT).


Standardize priority flag parsing across all commands

Accept both integer (0-4) and P0-P4 format in all commands.

**Commands to update:**
- bd create: Currently accepts both ✓
- bd update: Currently accepts both ✓
- bd list: Only accepts int
- bd search: Add priority filter (missing entirely)

**Implementation:**
- Create shared priority parsing function
- Support both formats: '0', '1', 'P0', 'P1', etc.
- Case-insensitive ('p0', 'P0')

**Files to modify:**
- cmd/bd/list.go
- cmd/bd/search.go
- Add utility function in internal/util/ or internal/types/

Implementation complete!

Changes made to cmd/bd/list.go:
1. Added validation import
2. Changed priority flag from IntP to registerPriorityFlag (line 428)
3. Changed priority-min/max from Int to String (lines 459-460)
4. Updated priority parsing to use ValidatePriority (lines 90-97, 230-237)
5. Updated priority-min/max parsing to use ValidatePriority (lines 195-210)

Testing verified:
✓ bd list -p P0 works
✓ bd list -p 0 works
✓ bd list --priority-min P1 --priority-max P2 works
✓ bd list --priority-min 1 --priority-max 2 works
✓ Invalid priorities rejected with clear error messages
✓ All tests pass

Both integer (0-4) and P-format (P0-P4) now work consistently across all priority flags in bd list.


Remove unused global daemon infrastructure (internal/daemonrunner/)

The internal/daemonrunner/ package (1,468 LOC) contains the old global daemon implementation that is no longer used. We now use per-workspace daemons.

Deadcode analysis shows all these functions are unreachable:
- Daemon.Start, runGlobalDaemon, setupLock
- validateSingleDatabase, validateSchemaVersion
- registerDaemon, unregisterDaemon
- validateDatabaseFingerprint
- Full git client implementation (NewGitClient, HasUpstream, HasChanges, Commit, Push, Pull)
- Helper functions: isGitRepo, gitHasUpstream, gitHasChanges, gitCommit

The entire package appears unused since switching to per-workspace daemon architecture.

Files to remove:
- daemon.go (9,436 bytes)
- git.go (3,510 bytes)
- sync.go (6,401 bytes)
- fingerprint.go (2,076 bytes)
- process.go (3,332 bytes)
- rpc.go (994 bytes)
- config.go (486 bytes)
- logger.go (1,579 bytes)
- flock_*.go (platform-specific file locking)
- signals_*.go (platform-specific signal handling)
- All test files

Total cleanup: ~1,500 LOC


Test RPC mutation event


Add import metrics for external_ref matching statistics

Add observability for external_ref matching behavior during imports to help debug and optimize import operations.

Metrics to track:
- Number of issues matched by external_ref
- Number of issues matched by ID
- Number of issues matched by content hash
- Number of external_ref updates vs creates
- Average import time with vs without external_ref

Output format:
- Add to ImportResult struct
- Include in import command output
- Consider structured logging

Use cases:
- Debugging slow imports
- Understanding match distribution
- Optimizing import performance

Related: bd-1022


Command Set Standardization & Flag Consistency

Comprehensive improvements to bd command set based on 2025 audit findings.

## Background
See docs/command-audit-2025.md for detailed analysis.

## Goals
1. Standardize flag naming and behavior across all commands
2. Add missing flags for feature parity
3. Fix naming confusion
4. Improve consistency in JSON output

## Success Criteria
- All mutating commands support --dry-run (no --preview variants)
- bd update supports label operations
- bd search has filter parity with bd list
- Priority flags accept both int and P0-P4 format everywhere
- JSON output is consistent across all commands


Refactor cmd/bd/daemon.go for testability and maintainability


Test child daemon mode


Implement signal-aware context in CLI commands

Replace context.Background() with signal.NotifyContext() to enable graceful cancellation.

## Context
Part of context propagation work (bd-350). Phase 1 infrastructure is complete - sqlite.New() now accepts context parameter.

## Implementation
Set up signal-aware context at the CLI entry points:

```go
ctx, cancel := signal.NotifyContext(context.Background(), os.Interrupt, syscall.SIGTERM)
defer cancel()
```

## Key Locations
- cmd/bd/main.go:438 (marked with TODO(bd-350))
- cmd/bd/daemon.go:317 (marked with TODO(bd-350))
- Other command entry points

## Benefits
- Ctrl+C cancels ongoing database operations
- Graceful shutdown on SIGTERM
- Better user experience during long operations

## Acceptance Criteria
- [ ] Ctrl+C during import cancels operation cleanly
- [ ] Ctrl+C during export cancels operation cleanly
- [ ] No database corruption on cancellation
- [ ] Proper cleanup on signal (defers execute)


Document external_ref in content hash behavior

The content hash includes external_ref, which has implications that should be documented.

Current behavior:
- external_ref is included in content hash calculation (collision.go:158-160)
- Changing external_ref changes content hash
- This means: local issue → add external_ref → different hash

Implications:
- Local issue + external_ref addition = looks like 'new content'
- May not match by content hash in some scenarios
- Generally correct behavior, but subtle

Action items:
- Document in code comments
- Add to ARCHITECTURE.md or similar
- Add test demonstrating this behavior
- Consider if this is desired long-term

Related: bd-1022
Files: internal/storage/sqlite/collision.go:158-160


Use in-memory filesystem for test git operations

Use tmpfs/ramdisk for git operations in tests to reduce I/O overhead.

Options:
1. Mount /tmp as tmpfs in CI (GitHub Actions supports this)
2. Use Go's testing.TB.TempDir() which may already use tmpfs on some systems
3. Explicitly create ramdisk for tests on macOS

Expected savings: 20-30% reduction in git operation time


Add schema compatibility probe to prevent silent migration failures

Issue #262 revealed a serious bug: migrations may fail silently, causing UNIQUE constraint errors later.

Root cause:
- sqlite.New() runs migrations once on open
- checkVersionMismatch() prints 'database will be upgraded automatically' but only updates metadata
- If migrations fail or daemon runs older version, queries expecting new columns fail with 'no such column'
- Import logic misinterprets this as 'not found' and tries INSERT on existing ID
- Result: UNIQUE constraint failed: issues.id

Fix strategy (minimal):
1. Add schema probe in sqlite.New() after RunMigrations
   - SELECT all expected columns from all tables with LIMIT 0
   - If fails, retry RunMigrations and probe again
   - If still fails, return fatal error with clear message
2. Fix checkVersionMismatch to not claim 'will upgrade' unless probe passes
3. Only update bd_version after successful migration probe
4. Add schema verification before import operations
5. Map 'no such column' errors to clear actionable message

Related: #262


Add MCP server functions for repair commands

Expose new repair commands via MCP server for agent access:

Functions to add:
- beads_repair_deps()
- beads_detect_pollution()
- beads_validate()
- beads_resolve_conflicts() (when implemented)

Update integrations/beads-mcp/src/beads_mcp/server.py

See repair_commands.md lines 803-884 for design.


Add tests for helper functions (GetDirtyIssueHash, GetAllDependencyRecords, export hashes)

Several utility functions have 0% coverage:
- GetDirtyIssueHash (dirty.go)
- GetAllDependencyRecords (dependencies.go)
- GetExportHash, SetExportHash, ClearAllExportHashes (hash.go)

These are lower priority but should have basic coverage.


YABB: Spurious issue updates during normal operations

Issue bd-627d was updated during config refactoring session without any actual changes to it. Only timestamps and content_hash changed.

Observed: Running various bd commands (list, create, etc.) caused bd-627d updated_at to change from 14:14 to 14:31.

Expected: Issues should only be updated when explicitly modified.

This causes:
- Dirty JSONL after every session
- False conflicts in git
- Confusing git history

Likely culprit: Daemon auto-import/export cycle or database migration touching all issues.

Investigated thoroughly - unable to reproduce. The import logic has IssueDataChanged() checks before calling UpdateIssue (importer/importer.go:458). All tests pass. May have been fixed by recent refactorings. Closing as cannot reproduce - please reopen with specific repro steps if it occurs again.


Prevent test pollution in production database

The bd-vxdr cleanup revealed test issues were created during manual testing in the production workspace (Nov 2-4, template feature development).

**Root cause:** Manual testing with `./bd create "Test issue"` pollutes the production .beads database.

**Prevention strategies:**
1. Use TEST_DB environment variable for manual testing
2. Add warning when creating issues with "Test" prefix
3. Improve developer docs about testing workflow
4. Consider adding `bd test-mode` command for isolated testing

**Implementation completed:**

1. ✅ Added warning when creating issues with "Test" prefix in production database
   - Shows yellow warning with ⚠ symbol
   - Suggests using BEADS_DB for isolated testing
   - Warning appears in create.go after title validation

2. ✅ Documented BEADS_DB testing workflow in AGENTS.md
   - Added "Testing Workflow" section in Development Guidelines
   - Includes manual testing examples with BEADS_DB
   - Includes automated testing examples with t.TempDir()
   - Clear warning about not polluting production database

3. ⚠ Decided against bd test-mode command
   - BEADS_DB already provides simple, flexible isolation
   - Additional command would add complexity without much benefit
   - Current approach follows Unix philosophy (env vars for config)

**Files modified:**
- cmd/bd/create.go - Added Test prefix warning
- AGENTS.md - Added Testing Workflow section

**Testing:**
- Verified warning appears when creating "Test" prefix issues
- Verified BEADS_DB isolation works correctly
- Built successfully with `go build`


Create comments.go with comment methods


Optimize CLI test suite - eliminate redundant git init calls

Current: Each of 13 CLI tests calls git init (31s total). Solution: Use single test binary built once in init(), skip git operations where possible, or use mock filesystem.


VCS-agnostic sync support

Make bd sync work with multiple VCS types (git, jujutsu, mercurial, sapling) by detecting VCS per repo and using appropriate sync commands, supporting mixed-VCS multi-repo configs.


Add tests for Comments API (AddIssueComment, GetIssueComments)

Comments API currently has 0% coverage. Need tests for:
- AddIssueComment - adding comments to issues
- GetIssueComments - retrieving comments
- Comment ordering and pagination
- Edge cases (non-existent issues, empty comments)


Document shared memory test isolation pattern in test_helpers.go

Tests were failing because :memory: creates a shared database across all tests. The fix is to use "file::memory:?mode=memory&cache=private" for test isolation.

Should document this pattern in test_helpers.go and potentially update newTestStore to use private memory by default.


Update documentation for bd prime and Claude integration

Update AGENTS.md, README.md, and QUICKSTART.md to document the new `bd prime` command, `bd setup claude` command, and tip system.


Add security tests for file path validation in clean command

Test coverage gap identified by automated analysis (vc-217).

**Original Issue:** [deleted:bd-da96-baseline-lint]

In cmd/bd/clean.go:118, os.Open(gitignorePath) is flagged by gosec G304 for potential file inclusion via variable without validation.

Add tests covering:
- Path traversal attempts (../../etc/passwd)
- Absolute paths outside project directory
- Symlink following behavior
- Non-existent file handling
- Validation that only .gitignore files in valid locations are opened

This is a security-sensitive code path that needs validation to prevent unauthorized file access.

_This issue was automatically created by AI test coverage analysis._


bd export should verify JSONL line count matches database count

After export completes, bd should verify that the JSONL file line count matches the number of issues exported. This would catch silent failures where the export appears to succeed but doesn't actually write all issues.

Real-world scenario from VC project:
- Ran direct SQL DELETE to remove 240 issues
- Ran 'bd export -o .beads/issues.jsonl'
- No error shown, appeared to succeed
- But JSONL file was not updated (still had old line count)
- Later session found all 240 issues still in JSONL
- Had to repeat the cleanup

If export had verified line count, it would have immediately shown:
  Error: Export verification failed
    Expected: 276 issues
    JSONL file: 516 lines
    Mismatch indicates export failed to write all issues

This is especially important because:
1. JSONL is source of truth in git
2. Silent export failures cause data inconsistency
3. Users assume export succeeded if no error shown
4. The verification is cheap (just count lines)

Implementation:
- After writing JSONL, count lines in file
- Compare to len(exportedIDs)
- If mismatch, remove temp file and return error
- Show clear error message with both counts


Add unit tests for parent resurrection

Test resurrection with deleted parent (should succeed), resurrection with never-existed parent (should fail gracefully), multi-level resurrection (bd-abc.1.2 with both parents missing). Verify tombstone creation and is_tombstone flag.


Extract normalizeLabels to shared utility package

The `normalizeLabels` function appears in multiple locations with identical implementation. Extract to a shared utility package.

Current locations:
- `internal/rpc/server.go:37` (53 lines) - full implementation
- `cmd/bd/list.go:50-52` - uses the server version (needs to use new shared version)

Function purpose:
- Trims whitespace from labels
- Removes empty strings
- Deduplicates labels
- Preserves order

Target structure:
```
internal/util/
├── strings.go         # String utilities
    └── NormalizeLabels([]string) []string
```

Impact: DRY principle, single source of truth, easier to test


bd-hv01: Add comprehensive edge case tests for deletion tracking

Need to add tests for: corrupted snapshot file, stale snapshot (> 1 hour), concurrent sync operations (daemon + manual), partial deletion failure, empty remote JSONL, multi-repo mode with deletions, git worktree scenario.

Also refine TestDeletionWithLocalModification to check for specific conflict error instead of accepting any error.

Files: cmd/bd/deletion_tracking_test.go


Add cancellation and timeout tests

Add comprehensive tests for context cancellation and timeout behavior.

## Context
Part of context propagation work. Validates that bd-rtp and bd-yb8 work correctly.

## Test Coverage Needed

### 1. Cancellation Tests
- [ ] Import operation cancelled mid-stream
- [ ] Export operation cancelled mid-stream
- [ ] Database query cancelled during long operation
- [ ] No corruption after cancellation
- [ ] Proper cleanup (defers execute, connections closed)

### 2. Timeout Tests
- [ ] Operations respect context deadlines
- [ ] Appropriate error messages on timeout
- [ ] State remains consistent after timeout

### 3. Signal Handling Tests
- [ ] SIGINT (Ctrl+C) triggers cancellation
- [ ] SIGTERM triggers graceful shutdown
- [ ] Multiple signals handled correctly

## Implementation Approach
```go
func TestImportCancellation(t *testing.T) {
    ctx, cancel := context.WithCancel(context.Background())

    // Start import in goroutine
    go func() {
        err := runImport(ctx, largeFile)
        assert.Error(err, context.Canceled)
    }()

    // Cancel after short delay
    time.Sleep(100 * time.Millisecond)
    cancel()

    // Verify database integrity
    assertDatabaseConsistent(t, store)
}
```

## Files to Create/Update
- cmd/bd/import_test.go - cancellation tests
- cmd/bd/export_test.go - cancellation tests
- internal/storage/sqlite/*_test.go - context timeout tests

## Acceptance Criteria
- [ ] All critical operations have cancellation tests
- [ ] Tests verify database integrity after cancellation
- [ ] Signal handling tested (if feasible)
- [ ] Test coverage >80% for context paths


Add validation for duplicate external_ref in batch imports

Currently, if a batch import contains multiple issues with the same external_ref, the behavior is undefined. We should detect and handle this case.

Current behavior:
- No validation for duplicate external_ref within a batch
- Last-write-wins or non-deterministic behavior

Proposed solution:
- Detect duplicate external_ref values in incoming batch
- Fail with clear error message OR
- Merge duplicates intelligently (use newest timestamp)
- Add test case for this scenario

Related: bd-1022


Fix autoimport tests for content-hash collision scoring

## Overview
Three autoimport tests are failing after [deleted:bd-cbed9619.4] because they expect behavior based on the old reference-counting collision resolution, but the system now uses deterministic content-hash scoring.

## Failing Tests
1. `TestAutoImportMultipleCollisionsRemapped` - expects local versions preserved
2. `TestAutoImportAllCollisionsRemapped` - expects local versions preserved
3. `TestAutoImportCollisionRemapMultipleFields` - expects specific collision resolution behavior

## Root Cause
These tests were written when ScoreCollisions used reference counting to determine which version to keep. Now it uses content-hash comparison (introduced in commit 2e87329), which produces different but deterministic results.

## Example
Old behavior: Issue with more references would be kept
New behavior: Issue with lexicographically lower content hash is kept

## Solution
Update each test to:
1. Verify the new content-hash based behavior is correct
2. Check that the remapped issue (not necessarily local/remote) has the expected content
3. Ensure dependencies are preserved on the correct remapped issue

## Acceptance Criteria
- All three autoimport tests pass
- Tests verify content-hash determinism (same collision always resolves the same way)
- Tests check dependency preservation on remapped issues
- Test documentation explains content-hash scoring expectations

## Files to Modify
- `cmd/bd/autoimport_collision_test.go`

## Testing
Run: `go test ./cmd/bd -run "TestAutoImport.*Collision" -v`


Fix bd doctor to recommend issues.jsonl as canonical (not beads.jsonl)


Assigned issue


Add integration tests for multi-repo sync

Test: Clone A deletes issue, Clone B imports Clone A's JSONL. Verify Clone B handles deletion gracefully with resurrection. Test concurrent imports with same orphans (should be idempotent). Test round-trip fidelity (export→delete parent→import→verify structure).


Add monitoring and alerting

Observability for production Agent Mail server.

Acceptance Criteria:
- Health check endpoint (/health)
- Prometheus metrics export
- Grafana dashboard
- Alerts for server downtime
- Alerts for high error rate
- Log aggregation config

File: deployment/agent-mail/monitoring/


Create WASM build infrastructure (Makefile, scripts)

Set up build tooling for WASM compilation:
- Add GOOS=js GOARCH=wasm build target
- Copy wasm_exec.js from Go distribution
- Create wrapper script for Node.js execution
- Add build task to Makefile or build script


Production Readiness (Optional)

Enable multi-machine deployments with containerization and monitoring.


Fix monitor-webui status filter


Test lowercase p0


Dogfood: Migrate beads repo to hash IDs

Final validation: migrate the beads project itself to hash-based IDs.

## Purpose
Dogfooding the migration on beads' own issue database to:
1. Validate migration tool works on real data
2. Discover edge cases
3. Verify all workflows still work
4. Build confidence for users

## Pre-Migration Checklist
- [ ] All bd-f8b764c9 child tasks completed
- [ ] All tests pass: `go test ./...`
- [ ] Migration tool tested on test databases
- [ ] Documentation updated
- [ ] MCP server updated and published
- [ ] Clean git status

## Migration Steps

### 1. Create Backup
```bash
# Backup database
cp -r .beads .beads.backup-1761798568

# Backup JSONL
cp .beads/beads.jsonl .beads/beads.jsonl.backup

# Create git branch for migration
git checkout -b hash-id-migration
git add .beads.backup-*
git commit -m "Pre-migration backup"
```

### 2. Run Migration (Dry Run)
```bash
bd migrate --hash-ids --dry-run > migration-plan.txt
cat migration-plan.txt

# Review:
# - Number of issues to migrate
# - Hash collision check (should be zero)
# - Text reference updates
# - Dependency updates
```

### 3. Run Migration (Real)
```bash
bd migrate --hash-ids 2>&1 | tee migration-log.txt

# Expected output:
# ✓ Backup created: .beads/beads.db.backup-1234567890
# ✓ Generated 150 hash IDs
# ✓ No hash collisions detected
# ✓ Updated issues table schema
# ✓ Updated 150 issue IDs
# ✓ Updated 87 dependencies
# ✓ Updated 234 text references
# ✓ Exported to .beads/beads.jsonl
# ✓ Migration complete!
```

### 4. Validation

#### Database Integrity
```bash
# Check all issues have hash IDs
bd list | grep -v "bd-[a-f0-9]\{8\}" && echo "FAIL: Non-hash IDs found"

# Check all issues have aliases
sqlite3 .beads/beads.db "SELECT COUNT(*) FROM issues WHERE alias IS NULL"
# Should be 0

# Check no alias duplicates
sqlite3 .beads/beads.db "SELECT alias, COUNT(*) FROM issues GROUP BY alias HAVING COUNT(*) > 1"
# Should be empty
```

#### Functionality Tests
```bash
# Test show by hash ID
bd show bd-

# Test show by alias
bd show #1

# Test create new issue
bd create "Test issue after migration" -p 2
# Should get hash ID + alias

# Test update
bd update #1 --priority 1

# Test dependencies
bd dep tree #1

# Test export
bd export
git diff .beads/beads.jsonl
# Should show hash IDs
```

#### Text Reference Validation
```bash
# Check that old IDs were updated in descriptions
grep -r "bd-[0-9]\{1,3\}[^a-f0-9]" .beads/beads.jsonl && echo "FAIL: Old ID format found"

# Verify hash ID references exist
grep -o "bd-[a-f0-9]\{8\}" .beads/beads.jsonl | sort -u | wc -l
# Should match number of hash IDs
```

### 5. Commit Migration
```bash
git add .beads/beads.jsonl .beads/beads.db
git commit -m "Migrate to hash-based IDs (v2.0)

- Migrated 150 issues to hash IDs
- Preserved aliases (#1-#150)
- Updated 87 dependencies
- Updated 234 text references
- Zero hash collisions

Migration log: migration-log.txt"

git push origin hash-id-migration
```

### 6. Create PR
```bash
gh pr create --title "Migrate to hash-based IDs (v2.0)" --body "## Summary
Migrates beads project to hash-based IDs as part of v2.0 release.

## Migration Stats
- Issues migrated: 150
- Dependencies updated: 87
- Text references updated: 234
- Hash collisions: 0
- Aliases assigned: 150

## Validation
- ✅ All tests pass
- ✅ Database integrity verified
- ✅ All workflows tested (show, update, create, deps)
- ✅ Text references updated correctly
- ✅ Export produces valid JSONL

## Files Changed
- `.beads/beads.jsonl` - Hash IDs in all entries
- `.beads/beads.db` - Schema updated with aliases

## Rollback
If issues arise:
\`\`\`bash
mv .beads.backup-1234567890 .beads
bd export
\`\`\`

See migration-log.txt for full details."
```

### 7. Merge and Cleanup
```bash
# After PR approval
git checkout main
git merge hash-id-migration
git push origin main

# Tag release
git tag v2.0.0
git push origin v2.0.0

# Cleanup
rm migration-log.txt migration-plan.txt
git checkout .beads.backup-*  # Keep in git history
```

## Rollback Procedure
If migration fails or has issues:

```bash
# Restore backup
mv .beads .beads.failed-migration
mv .beads.backup-1234567890 .beads

# Regenerate JSONL
bd export

# Verify restoration
bd list
git diff .beads/beads.jsonl

# Cleanup
git checkout hash-id-migration
git reset --hard main
```

## Post-Migration Communication

### GitHub Issue/Discussion
```markdown
## Beads v2.0 Released: Hash-Based IDs

We've migrated beads to hash-based IDs! 🎉

**What changed:**
- Issues now use hash IDs (bd-af78e9a2) instead of sequential (bd-cb64c226.3)
- Human-friendly aliases (#42) for easy reference
- Zero collision risk in distributed workflows

**Action required:**
If you have a local clone, you need to migrate:

\`\`\`bash
git pull origin main
bd migrate --hash-ids
git push origin main
\`\`\`

See MIGRATION.md for details.

**Benefits:**
- ✅ No more ID collisions
- ✅ Work offline without coordination
- ✅ Simpler codebase (-2,100 LOC)

Questions? Reply here or see docs/HASH_IDS.md
```

## Success Criteria
- [ ] Migration completes without errors
- [ ] All validation checks pass
- [ ] PR merged to main
- [ ] v2.0.0 tagged and released
- [ ] Documentation updated
- [ ] Community notified
- [ ] No rollback needed within 1 week

## Files to Create
- migration-log.txt (transient)
- migration-plan.txt (transient)

## Timeline
Execute after all other bd-f8b764c9 tasks complete (estimated: ~8 weeks from start)


Merge PR #300: gitignore upgrade feature

PR #300 is ready to merge but has rebase conflicts with main.

**Context:**
- PR implements 3 mechanisms for .beads/.gitignore upgrade (bd doctor --fix, daemon auto-upgrade, bd init idempotent)
- Conflicts resolved locally but diverged branches make push difficult
- All fixes applied: removed merge artifact, applied new gitignore template
- Clean scope: only 6 files changed (+194/-42)

**Next steps:**
1. Option A: Merge via GitHub UI (resolve conflicts in web interface)
2. Option B: Fresh rebase on main and force push
3. Verify CI passes
4. Squash and merge

PR URL: https://github.com/steveyegge/beads/pull/300
Fixes: #274


Add optional post-merge git hook example for bd sync

Create example git hook that auto-runs bd sync after git pull/merge.

Add to examples/git-hooks/:
- post-merge hook that checks if .beads/issues.jsonl changed
- If changed: run `bd sync` automatically
- Make it optional/documented (not auto-installed)

Benefits:
- Zero-friction sync after git pull
- Complements auto-detection as belt-and-suspenders

Note: post-merge hook already exists for pre-commit/post-merge. Extend it to support sync.


Clarify .beads/.gitattributes handling in Protected Branches docs

Protected Branches docs quick start leaves untracked `.beads` directory and `.gitattributes`.
Question: Are these changes meant to be checked into the protected branch?
Need to clarify if these should be ignored or committed, or if the instructions are missing a step.


Add tests for internal/importer package

Currently 0.0% coverage. Need tests for JSONL import logic including collision detection and resolution.


Add tests for getMultiRepoJSONLPaths() edge cases

From bd-xo6b code review: Missing test coverage for getMultiRepoJSONLPaths() edge cases.

Current test gaps:
- No tests for empty paths in config
- No tests for duplicate paths
- No tests for tilde expansion
- No tests for relative paths
- No tests for symlinks
- No tests for paths with spaces
- No tests for invalid/non-existent paths

Test cases needed:

1. Empty path handling:
   Primary = empty, Additional = [empty]
   Expected: Should either use . as default or error gracefully

2. Duplicate detection:
   Primary = ., Additional = [., ./]
   Expected: Should return unique paths only

3. Path normalization:
   Primary = ~/repos/main, Additional = [../other, ./foo/../bar]
   Expected: Should expand to absolute canonical paths

4. Partial failure scenarios:
   What if snapshot capture succeeds for repos 1-2 but fails on repo 3?
   Test that system does not end up in inconsistent state

Files:
- cmd/bd/deletion_tracking_test.go (add new tests)

Dependencies:
Depends on fixing getMultiRepoJSONLPaths() path normalization first.


Update daemon commit logic for separate branch

Modify daemon to use worktree for commits when sync.branch configured.

Tasks:
- Update internal/daemon/server_export_import_auto.go
- Detect sync.branch configuration
- Ensure worktree exists before commit
- Sync JSONL to worktree
- Commit in worktree context
- Push to configured branch
- Fallback to current behavior if sync.branch not set
- Handle git errors (network, permissions, conflicts)

Estimated effort: 3-4 days


Add 'bd status' command for issue database overview

Implement a bd status command that provides a quick snapshot of the issue database state, similar to how git status shows working tree state.

Expected output: Show summary including counts by state (open, in-progress, blocked, closed), recent activity (last 7 days), and quick overview without needing multiple queries.

Example output showing issue counts, recent activity stats, and pointer to bd list for details.

Proposed options: --all (show all issues), --assigned (show issues assigned to current user), --json (JSON format output)

Use cases: Quick project health check, onboarding for new contributors, integration with shell prompts or CI/CD, daily standup reference


Fix: --parent flag doesn't create parent-child dependency

When using `bd create --parent <id>`, the code generates a hierarchical child ID (e.g., bd-123.1) but never creates a parent-child dependency. This causes `bd epic status` to show zero children even though child issues exist.

Root cause: create.go generates child ID using store.GetNextChildID() but never calls store.AddDependency() with type parent-child.

Fix: After creating the issue when parentID is set, automatically add a parent-child dependency linking child -> parent.


Fix linting error in migrate.go

Linter reports error:
```
cmd/bd/migrate.go:647:37: cleanupWALFiles - result 0 (error) is always nil (unparam)
```

The `cleanupWALFiles` function always returns nil, so the error return type should be removed or the function should actually return errors when appropriate.


Enhance `bd doctor` to verify Claude Code integration

Add checks to `bd doctor` that verify Claude Code integration is properly set up when .claude/ directory or Claude environment is detected.


Fix :memory: database connection pool issue causing "no such table" errors

Critical bug in v0.21.6 where :memory: databases with cache=shared create multiple connections in the pool, causing intermittent "no such table" errors. SQLite's shared cache for in-memory databases only works reliably with a single connection.

Root cause: Missing db.SetMaxOpenConns(1) after sql.Open() for :memory: databases.

Impact: 37 test failures in VC project, affects all consumers using :memory: for testing.


Test P1 priority


Fix TestTwoCloneCollision timeout


Add database maintenance commands section to QUICKSTART.md

**Problem:**
Users don't discover `bd compact` or `bd cleanup` commands until their database grows large. These maintenance commands aren't mentioned in quickstart documentation.

Related to issue #349 item #4.

**Current state:**
docs/QUICKSTART.md ends at line 217 with "See README.md for full documentation" but has no mention of maintenance operations.

**Proposed addition:**
Add a "Database Maintenance" section after line 140 (before "Advanced: Agent Mail" section) covering:
- When database grows (many closed issues)
- How to view compaction statistics
- How to compact old issues
- How to delete closed issues
- Warning about permanence

**Example content:**
```markdown
## Database Maintenance

As your project accumulates closed issues, the database grows. Use these commands to manage size:

```bash
# View compaction statistics
bd compact --stats

# Preview compaction candidates (30+ days closed)
bd compact --analyze --json

# Apply agent-generated summary
bd compact --apply --id bd-42 --summary summary.txt

# Immediately delete closed issues (use with caution!)
bd cleanup --force
```

**When to compact:**
- Database file > 10MB with many old closed issues
- After major project milestones
- Before archiving a project phase
```

**Files to modify:**
- docs/QUICKSTART.md (add section after line 140)


Testing & Validation

Ensure reliability through comprehensive testing.

Completed comprehensive Agent Mail test coverage analysis and implementation.

**Test Coverage Summary:**
- 66 total tests across 5 files
- 51 unit tests for HTTP adapter (0.02s)
- 15 integration tests for multi-agent scenarios (~55s total)

**New Tests Added:**
Created `test_multi_agent_coordination.py` (4 tests, 11s) covering:
1. Fairness: 10 agents competing for 5 issues → exactly 1 claim per issue
2. Notifications: End-to-end message delivery between agents
3. Handoff: Clean reservation transfer from agent1 to agent2
4. Idempotency: Double reserve/release by same agent

**Coverage Quality:**
✅ Collision prevention (race conditions)
✅ Graceful degradation (7 failure modes)
✅ TTL/expiration behavior
✅ Multi-agent coordination
✅ JSONL consistency
✅ HTTP error handling
✅ Authorization and configuration

**Intentionally Skipped:**
- Path traversal (validated elsewhere)
- Retry policies (nice-to-have)
- HTTPS/TLS (out of scope)
- Slow tests (50+ agents, soak tests)

See `tests/integration/AGENT_MAIL_TEST_COVERAGE.md` for details.

All tests pass. Agent Mail integration is well-tested and reliable for multi-agent scenarios.


Fix TestListCommand duplicate dependency constraint violation


Feature with design

This is a description


Fix failing integration tests in beads-mcp

The `beads-mcp` test suite has failures in `tests/test_bd_client_integration.py` (assertion error in `test_init_creates_beads_directory`) and errors in `tests/test_worktree_separate_dbs.py` (setup failures finding database). These need to be investigated and fixed to ensure a reliable CI baseline.


Set up WASM build pipeline

Configure Go→WASM compilation pipeline. Child of epic bd-44d0.

## Tasks
- [ ] Create build-wasm.sh script (GOOS=js GOARCH=wasm)
- [ ] Test basic WASM module loading in Node.js
- [ ] Set up wasm_exec.js wrapper
- [ ] Add WASM build to CI/CD
- [ ] Document build process

## Validation
- bd.wasm compiles successfully
- Can load in Node.js without errors
- Bundle size <10MB


Fix TestTwoCloneCollision to compare content not timestamps

The test at beads_twoclone_test.go:204-207 currently compares full JSON output including timestamps, causing false negative failures.

Current behavior:
- Both clones converge to identical semantic content
- Clone A: test-2="Issue from clone A", test-1="Issue from clone B"
- Clone B: test-1="Issue from clone B", test-2="Issue from clone A"
- Titles match IDs correctly, no data corruption
- Only timestamps differ (expected and acceptable)

Fix needed:
- Replace exact JSON comparison with content-aware comparison
- Normalize or ignore timestamp fields when asserting convergence
- Test should PASS after this fix

This blocks completion of bd-71107098.


GH#245: Windows MCP subprocess timeout for git rev-parse

User reports git detection timing out on Windows in MCP server, but CLI works fine.

Path: C:\Users\chris\Documents\DEV_R\quarto-cli
Error: Git repository detection timed out after 5s
Works fine in CLI: `git rev-parse --show-toplevel` succeeds

Hypothesis: subprocess.run() with asyncio.to_thread() may have Windows-specific issues or the MCP runtime environment may not have proper PATH/git access.

Potential fixes:
1. Add subprocess shell=True on Windows
2. Increase timeout further for Windows
3. Add better error logging to capture subprocess stderr
4. Skip git resolution entirely on timeout and just use provided path


Tests take too long - unacceptable for project size

## Problem

Running `go test ./internal/importer/... -v` takes an unacceptably long time (minutes). For a project this size, tests should complete in seconds.

## Impact

- Slows down development iteration
- AI agents waste time waiting for tests
- Blocks rapid bug fixes and validation
- Poor developer experience

## Investigation Needed

- Profile which tests are slow
- Check for unnecessary sleeps, timeouts, or integration tests
- Look for tests that could be parallelized
- Consider splitting unit vs integration tests

## Goal

Test suite for a single package should complete in <5 seconds, ideally <2 seconds.

## Optimizations Applied

1. **Added t.Parallel() to CLI tests** (13 tests) - allows concurrent execution
2. **Removed unnecessary 200ms sleep** in daemon_autoimport_test.go - Execute() forces auto-import synchronously
3. **Reduced filesystem settle wait** from 100ms → 50ms on non-Windows platforms
4. **Optimized debouncer test sleeps** (9 reductions):
   - Before debounce waits: 30ms → 20ms, 20ms → 10ms
   - After debounce waits: 40ms → 35ms, 30ms → 35ms, etc.
   - Thread safety test: 100ms → 70ms
   - Sequential cycles: 50ms → 40ms (3x)
   - Cancel tests: 70-80ms → 60ms

## Results

### cmd/bd package (main improvement target):
- **Before**: 5+ minutes (timeout)
- **After**: ~18-20 seconds
- **Speedup**: ~15-18x faster

### internal/importer package:
- **After**: <1 second (0.9s)

### Full test suite (with `-short` flag):
- Most packages complete in <2s
- Total runtime constrained by sequential integration tests

## Known Issues

- TestConcurrentExternalRefImports hangs due to :memory: connection pool issue (bd-b121)
- Some sync_branch tests may need sequential execution (git worktree conflicts)


Add tests for internal/utils package

Currently 0.0% coverage. Need tests for utility functions including issue ID parsing and validation.


bd message: Refactor duplicated error messages


Week 1 task


Performance Testing Framework

Add comprehensive performance testing for beads focusing on optimization guidance and validating 10K+ database scale. Uses standard Go tooling, follows existing patterns, minimal complexity.

Components:
- Benchmark suite for critical operations at 10K-20K scale
- Fixture generator for realistic test data (epic hierarchies, cross-links)
- User diagnostics via bd doctor --perf
- Always-on profiling integration

Goals:
- Identify bottlenecks for optimization work
- Validate performance at 10K+ issue scale
- Enable users to collect diagnostics for bug reports
- Support both SQLite and JSONL import paths


Add docs/architecture/event_driven.md

Copy event_driven_daemon.md into docs/ folder. Add to documentation index.


Add tests for bd init --contributor wizard

Write integration tests for the contributor wizard:
- Test fork detection logic
- Test planning repo creation
- Test config setup
- Test with/without upstream remote
- Test with SSH vs HTTPS origins


Clean up merge conflict artifacts in .beads directory

After resolving merge conflicts in .beads/beads.jsonl, leftover artifacts remain as untracked files:
- .beads/beads.base.jsonl
- .beads/beads.left.jsonl

These appear to be temporary files created during merge conflict resolution.

Options to fix:
1. Add these patterns to .beads/.gitignore automatically
2. Clean up these files after successful merge resolution
3. Document that users should delete them manually
4. Add a check in 'bd sync' or 'bd doctor' to detect and remove stale merge artifacts

Preferred solution: Add *.base.jsonl and *.left.jsonl patterns to .beads/.gitignore during 'bd init', and optionally clean them up automatically after successful import.


Backend task


Rapid 1


Add test coverage for internal/config package


Fix inconsistent version comparison logic in trackBdVersion


Export deduplication breaks when JSONL and export_hashes table diverge

## Problem

The export deduplication feature (timestamp-only skipping) breaks when the JSONL file and export_hashes table get out of sync, causing exports to skip issues that aren't actually in the file.

## Symptoms

- `bd export` reports "Skipped 128 issue(s) with timestamp-only changes"
- JSONL file only has 38 lines but DB has 149 issues
- export_hashes table has 149 entries
- Auto-import doesn't trigger (hash matches despite missing data)
- Two repos on same commit show different issue counts

## Root Cause

shouldSkipExport() in autoflush.go compares current issue hash with stored export_hashes entry. If they match, it skips export assuming the issue is already in the JSONL.

This assumption fails when:
1. Git operations (pull, reset, checkout) change JSONL without clearing export_hashes
2. Manual JSONL edits or corruption
3. Import operations that modify DB but don't update export_hashes
4. Partial exports that update export_hashes but don't complete

## Impact

- **Critical data loss risk**: Issues appear to be tracked but aren't persisted to git
- Breaks multi-repo sync (root cause of today's debugging session)
- Auto-import fails to detect staleness (hash matches despite missing data)
- Silent data corruption (no error messages, just missing issues)

## Reproduction

1. Have DB with 149 issues, all in export_hashes table
2. Truncate JSONL to 38 lines (simulate git reset or corruption)
3. Run `bd export` - it skips 128 issues
4. JSONL still has only 38 lines but export thinks it succeeded

## Current Workaround

```bash
sqlite3 .beads/beads.db "DELETE FROM export_hashes"
bd export -o .beads/beads.jsonl
```

## Proposed Solutions

**Option 1: Verify JSONL integrity before skipping**
- Count lines in JSONL, compare with export_hashes count
- If mismatch, clear export_hashes and force full export
- Safe but adds I/O overhead

**Option 2: Hash-based JSONL validation**
- Store hash of entire JSONL file in metadata
- Before export, check if JSONL hash matches
- If mismatch, clear export_hashes
- More efficient, detects any JSONL corruption

**Option 3: Disable timestamp-only deduplication**
- Remove the feature entirely
- Always export all issues
- Simplest and safest, but creates larger git commits

**Option 4: Clear export_hashes on git operations**
- Add post-merge hook to clear export_hashes
- Clear on any import operation
- Defensive approach but may over-clear

## Recommended Fix

Combination of Options 2 + 4:
1. Store JSONL file hash in metadata after export
2. Check hash before export, clear export_hashes if mismatch
3. Clear export_hashes on import operations
4. Add `bd validate` check for JSONL/export_hashes sync

## Files Involved

- cmd/bd/autoflush.go (shouldSkipExport)
- cmd/bd/export.go (export with deduplication)
- internal/storage/sqlite/metadata.go (export_hashes table)


Fix mypy errors in beads-mcp

Running `mypy .` in `integrations/beads-mcp` reports 287 errors. These should be addressed to improve type safety and code quality.


Remove misleading placeholder 'bd merge' command from duplicates output

**Problem:**
The `bd duplicates` command suggests running a command that doesn't exist:
```
bd merge <source-ids> --into <target-id>
```

This is confusing because:
1. `bd merge` is actually a git 3-way JSONL merge driver (takes 4 file paths)
2. The suggested syntax for merging duplicate issues is not implemented
3. Line 75 in duplicates.go even has: `// TODO: performMerge implementation pending`

**Current behavior:**
- Users see suggested command that doesn't work
- No indication that feature is unimplemented
- Related to issue #349 item #2

**Proposed fix:**
Replace line 77 in cmd/bd/duplicates.go with either:

Option A (conservative):
```go
cmd := fmt.Sprintf("# TODO: Merge %s into %s (merge command not yet implemented)",
    strings.Join(sources, " "), target.ID)
```

Option B (actionable):
```go
cmd := fmt.Sprintf("# Duplicate found: %s\n# Manual merge: Close duplicates with 'bd close %s' and link to %s as 'related'",
    strings.Join(sources, " "), strings.Join(sources, " "), target.ID)
```

**Files to modify:**
- cmd/bd/duplicates.go (line ~77)


Fix bd doctor hash ID detection for short all-numeric hashes

bd doctor incorrectly flags hash-based IDs as sequential when they are short (3-4 chars) and all-numeric (e.g., pf-158).

Root cause: isHashID() in cmd/bd/migrate_hash_ids.go:328-358 uses faulty heuristic:
- For IDs < 5 chars, only returns true if contains letters
- But base36 hash IDs can be 3+ chars and all-numeric (MinLength: 3)
- Example: pf-158 is valid hash ID but flagged as sequential

Fix: Check multiple IDs (10-20 samples) instead of single-ID pattern matching:
- Sample IDs across database
- Check majority pattern (sequential vs hash format)
- Sequential: 1-4 digits (bd-1, bd-2...)
- Hash: 3-8 chars base36 (pf-158, pf-3s9...)

Impact: False positive warnings in bd doctor output


Add edge case tests for GetNextChildID parent resurrection

## Current Coverage
TestGetNextChildID_ResurrectParent tests happy path only:
- Parent exists in JSONL
- Resurrection succeeds

## Missing Test Cases

### 1. Parent Not in JSONL
- Parent doesn't exist in DB
- Parent doesn't exist in JSONL either
- Should return: "could not be resurrected from JSONL history"

### 2. JSONL File Missing
- Parent doesn't exist in DB
- No issues.jsonl file exists
- Should handle gracefully

### 3. Malformed JSONL
- Parent doesn't exist in DB
- JSONL file exists but has invalid JSON
- Should skip bad lines, continue searching

### 4. Concurrent Resurrections
- Multiple goroutines call GetNextChildID with same parent
- Only one should resurrect, others should succeed
- Test for race conditions

### 5. Deeply Nested Missing Parents
- Creating bd-abc.1.2.1 where:
  - bd-abc exists
  - bd-abc.1 missing (should fail with current fix)
- Related to bd-ar2.4

### 6. Content Hash Mismatch
- Parent in JSONL has different content_hash than expected
- Should still resurrect (content_hash is for integrity, not identity)

## Files
- internal/storage/sqlite/child_id_test.go

## Implementation
```go
func TestGetNextChildID_ResurrectParent_NotInJSONL(t *testing.T) { ... }
func TestGetNextChildID_ResurrectParent_NoJSONL(t *testing.T) { ... }
func TestGetNextChildID_ResurrectParent_MalformedJSONL(t *testing.T) { ... }
func TestGetNextChildID_ResurrectParent_Concurrent(t *testing.T) { ... }
```


Test update


Updated title


Add richer query capabilities to bd list

Current bd list filters are limited to basic field matching (status, priority, type, assignee, label). This forces users to resort to piping through jq for common queries.

Missing query capabilities:
- Pattern matching: --title-contains, --desc-contains
- Date ranges: --created-after, --updated-before, --closed-after
- Empty/null checks: --empty-description, --no-assignee, --no-labels
- Numeric ranges: --priority-min, --priority-max
- Complex boolean logic: --and, --or operators
- Full-text search: --search across all text fields
- Negation: --not-status, --exclude-label

Example use cases:
- Find issues with empty descriptions
- Find stale issues not updated in 30 days
- Find high-priority bugs with no assignee
- Search for keyword across title/description/notes

Implementation approach:
- Add query builder pattern to storage layer
- Support --query DSL for complex queries
- Keep simple flags for common cases
- Add --json output for programmatic use

## Progress Update

**Completed:**
- ✅ Extended IssueFilter struct with new fields (pattern matching, date ranges, empty/null checks, priority ranges)
- ✅ Updated SQLite SearchIssues implementation
- ✅ Added CLI flags to list.go
- ✅ Added parseTimeFlag helper
- ✅ Comprehensive tests added - all passing

**Remaining:**
- ⚠ RPC layer needs updating (internal/rpc/protocol.go ListArgs)
- ⚠ Daemon handler needs to forward new filters
- ⚠ End-to-end testing with daemon mode
- 📝 Documentation updates

**Files Modified:**
- internal/types/types.go
- internal/storage/sqlite/sqlite.go
- cmd/bd/list.go
- cmd/bd/list_test.go

**Next Steps:**
1. Update RPC protocol
2. Update daemon handler
3. Test with daemon mode
4. Update docs


Add validation to require description when creating issues

## Solution: Code-level validation

Add validation in bd create to warn or require a description when creating non-test issues.

## Implementation Options

### Option 1: Warning (Non-blocking)
- Print a warning when description is empty
- Similar to existing 'Test' prefix warning in create.go:62-66
- Allows users to proceed but raises awareness

### Option 2: Strict validation with bypass
- Require description for all issues except:
  - Issues with 'test' in title (case-insensitive)
  - When --no-description-check flag is provided
- Exit with error if description is empty and no bypass

### Option 3: Interactive prompt (CLI only)
- If description empty, prompt user to enter one
- Only works in CLI, not via MCP/daemon mode
- May confuse AI agents expecting non-interactive behavior

## Recommendation

Start with Option 1 (warning) to gather feedback, then potentially move to Option 2 if problem persists.

## Files to modify

- cmd/bd/create.go - Add validation after line 80 (where description is retrieved)
- Consider adding to RPC handler in daemon mode as well


Create cmd/bd/daemon_watcher.go (~150 LOC)

Implement FileWatcher using fsnotify to watch JSONL file and git refs. Handle platform differences (inotify/FSEvents/ReadDirectoryChangesW). Include edge case handling for file rename, event storm, watcher failure.


Batch test 1


Database import silently fails when daemon version != CLI version


bd sync --import-only doesn't update DB mtime causing bd doctor false warning


Update AGENTS.md with Agent Mail workflow

Update agent workflow section to include Agent Mail coordination as optional step.

Acceptance Criteria:
- Add Agent Mail to recommended workflow
- Show both with/without examples
- Update "Multi-Agent Patterns" section
- Cross-reference to AGENT_MAIL.md

File: AGENTS.md (lines 468-475)


Add bd alias command for manual alias control

Add command for users to manually view and reassign aliases.

## Command: bd alias

### Subcommands

#### 1. bd alias list
Show all alias mappings:
```bash
$ bd alias list
#1    → bd-af78e9a2  Fix authentication bug
#2    → bd-e5f6a7b8  Add logging to daemon
#42   → bd-1a2b3c4d  Investigate jujutsu integration
#100  → bd-9a8b7c6d  (reassigned after conflict)
```

#### 2. bd alias set <alias> <hash-id>
Manually assign alias to specific issue:
```bash
$ bd alias set 42 bd-1a2b3c4d
✓ Assigned alias #42 to bd-1a2b3c4d

$ bd alias set 1 bd-af78e9a2
✗ Error: Alias #1 already assigned to bd-e5f6a7b8
Use --force to override
```

#### 3. bd alias compact
Renumber all aliases to fill gaps:
```bash
$ bd alias compact [--dry-run]

Current aliases: #1, #2, #5, #7, #100, #101
After compacting: #1, #2, #3, #4, #5, #6

Renumbering:
  #5   → #3
  #7   → #4
  #100 → #5
  #101 → #6

Apply changes? [y/N]
```

#### 4. bd alias reset
Regenerate all aliases (sequential from 1):
```bash
$ bd alias reset [--sort-by=priority|created|id]

WARNING: This will reassign ALL aliases. Continue? [y/N]

Reassigning 150 issues by priority:
  bd-a1b2c3d4 → #1   (P0: Critical security bug)
  bd-e5f6a7b8 → #2   (P0: Data loss fix)
  bd-1a2b3c4d → #3   (P1: Jujutsu integration)
  ...
```

#### 5. bd alias find <hash-id>
Look up alias for hash ID:
```bash
$ bd alias find bd-af78e9a2
#1

$ bd alias find bd-nonexistent
✗ Error: Issue not found
```

## Use Cases

### 1. Keep Important Issues Low-Numbered
```bash
# After closing many P0 issues, compact to free low numbers
bd alias compact

# Or manually set
bd alias set 1 bd-<critical-bug-hash>
```

### 2. Consistent Aliases Across Clones
```bash
# After migration, coordinator assigns canonical aliases
bd alias reset --sort-by=id
git add .beads/aliases.jsonl
git commit -m "Canonical alias assignments"
git push

# Other clones pull and adopt
git pull
bd import  # Alias conflicts resolved automatically
```

### 3. Debug Alias Conflicts
```bash
# See which aliases were reassigned
bd alias list | grep "#100"
```

## Flags

### Global
- `--dry-run`: Preview changes without applying
- `--force`: Override existing alias assignments

### bd alias reset
- `--sort-by=priority`: Assign by priority (P0 first)
- `--sort-by=created`: Assign by creation time (oldest first)
- `--sort-by=id`: Assign by hash ID (lexicographic)

## Implementation

File: cmd/bd/alias.go
```go
func aliasListCmd() *cobra.Command {
    return &cobra.Command{
        Use:   "list",
        Short: "List all alias mappings",
        Run: func(cmd *cobra.Command, args []string) {
            aliases := storage.GetAllAliases()
            for _, a := range aliases {
                fmt.Printf("#%-4d → %s  %s\n",
                    a.Alias, a.IssueID, a.Title)
            }
        },
    }
}

func aliasSetCmd() *cobra.Command {
    return &cobra.Command{
        Use:   "set <alias> <hash-id>",
        Short: "Manually assign alias to issue",
        Args:  cobra.ExactArgs(2),
        Run: func(cmd *cobra.Command, args []string) {
            alias, _ := strconv.Atoi(args[0])
            hashID := args[1]

            force, _ := cmd.Flags().GetBool("force")
            if err := storage.SetAlias(alias, hashID, force); err != nil {
                fmt.Fprintf(os.Stderr, "Error: %v\n", err)
                os.Exit(1)
            }
            fmt.Printf("✓ Assigned alias #%d to %s\n", alias, hashID)
        },
    }
}
```

## Files to Create
- cmd/bd/alias.go

## Testing
- Test alias list output
- Test alias set with/without force
- Test alias compact removes gaps
- Test alias reset with different sort orders
- Test alias find lookup


Investigate jujutsu integration for beads

Research and document how beads could integrate with jujutsu (jj), the next-generation VCS. Key areas to explore:
- How jj's operation model differs from git (immutable operations, working-copy-as-commit)
- JSONL sync strategy with jj's conflict resolution model
- Daemon compatibility with jj's more frequent rewrites
- Whether auto-import/export needs changes for jj workflows
- Example configurations and documentation updates needed


Research Go WASM compilation and modernc.org/sqlite WASM support

Investigate technical requirements for compiling bd to WASM:
- Verify modernc.org/sqlite has working js/wasm support
- Identify Go stdlib limitations in WASM (syscalls, file I/O, etc.)
- Research wasm_exec.js runtime and Node.js integration
- Document any API differences between native and WASM builds


Extract hash ID generation functions to hash_ids.go

Move generateHashID, getNextChildNumber, GetNextChildID to hash_ids.go


Centralize BD_DEBUG logging into debug package

The codebase has 43 scattered instances of `if os.Getenv("BD_DEBUG") != ""` debug checks across 6 files. Centralize into a debug logging package.

Current locations:
- `cmd/bd/main.go` - 15 checks
- `cmd/bd/autoflush.go` - 6 checks
- `cmd/bd/nodb.go` - 4 checks
- `internal/rpc/server.go` - 2 checks
- `internal/rpc/client.go` - 5 checks
- `cmd/bd/daemon_autostart.go` - 11 checks

Target structure:
```
internal/debug/
└── debug.go
```

Benefits:
- Centralized debug logging
- Easier to add structured logging later
- Testable (can mock debug output)
- Consistent debug message format

Impact: Removes 43 scattered checks, improves code clarity


Add tests for 3-way merge scenarios

Comprehensive test coverage for merge logic.

**Test cases**:
- Simple field updates (left vs right)
- Dependency merging (union + dedup)
- Timestamp handling (max wins)
- Deletion detection (deleted in one, modified in other)
- Conflict generation (incompatible changes)
- Issue resurrection prevention (bd-hv01 regression test)

**Files**:
- `internal/merge/merge_test.go`
- `cmd/bd/merge_test.go`


Multi-repo contributor workflow support

Implement separate repository support for OSS contributors to prevent PR pollution while maintaining git ledger and multi-clone sync. Based on contributor-workflow-analysis.md Solution #4.


Windows binaries lack SQLite support (GH #253)

Windows users installing via install.ps1 get "sql: unknown driver sqlite" error. Root cause: GoReleaser was building with CGO_ENABLED=0, which excludes SQLite driver.

Fixed by:
1. Enabling CGO in .goreleaser.yml
2. Installing MinGW cross-compiler in release workflow
3. Splitting builds per platform to set correct CC for Windows

Needs new release to fix for users.


Add fsnotify dependency to go.mod


Client self-heal: remove stale pid when lock free + socket missing

When client detects:
- Socket is missing AND
- tryDaemonLock shows lock NOT held

Then automatically:
1. Remove stale daemon.pid file
2. Optionally auto-start daemon (behind BEADS_AUTO_START_DAEMON=1 env var)

This prevents stale artifacts from accumulating after daemon crashes.


Refactor sqlite.go into focused modules

Split sqlite.go (2,298 lines) into focused modules: migrations.go, ids.go, issues.go, events.go, dirty.go, db.go. This will improve maintainability and reduce cognitive load.


Integration test: mutation to export latency

Measure time from bd create to JSONL update. Verify <500ms latency. Test with multiple rapid mutations to verify batching.


bd validate - Comprehensive health check

Run all validation checks in one command.

Checks:
- Duplicates
- Orphaned dependencies
- Test pollution
- Git conflicts

Supports --fix-all for auto-repair.

Depends on bd-cbed9619.1, bd-0dcea000, bd-2752a7a2, bd-9826b69a.

Files: cmd/bd/validate.go (new)


Investigate jujutsu VCS as potential solution for conflict-free merging

## Context
Current N-way collision resolution struggles with Git line-based merge model. When 5+ clones create issues with same ID, Git merge conflicts require manual resolution, and our collision resolver can fail during convergence rounds.

## Research Question
Could jujutsu (jj) provide better conflict handling for JSONL files?

## Jujutsu Overview
- Next-gen VCS built on libgit2
- Designed to handle conflicts as first-class citizens
- Supports conflict-free replicated data types (CRDTs) in some scenarios
- Better handling of concurrent edits
- Can work with Git repos (compatible with existing infrastructure)

## Investigation Tasks
1. JSONL Merge Behavior - How does jj handle line-by-line JSONL conflicts?
2. Integration Feasibility - Can beads use jj as backend while maintaining Git compatibility?
3. Conflict Resolution Model - Does jj conflict model map to our collision resolution?
4. Operational Transform Support - Does jj implement operational transforms?

## Deliverables
1. Technical report on jj merge algorithm for JSONL
2. Proof-of-concept: 5-clone collision test using jj instead of Git
3. Performance comparison: Git vs jj for beads workload
4. Recommendation: Adopt, experiment further, or abandon

## References
- https://github.com/martinvonz/jj
- Related to bd-e6d71828, bd-7a2b58fc


Test auto-start in fred


Create cmd/bd/daemon_debouncer.go (~60 LOC)

Implement Debouncer to batch rapid events into single action. Default 500ms, configurable via BEADS_DEBOUNCE_MS. Thread-safe with mutex.


Add global verbosity flags (--verbose, --quiet)

Add consistent verbosity controls across all commands.

**Current state:**
- bd init has --quiet flag
- No other commands have verbosity controls
- Debug output controlled by BD_VERBOSE env var

**Proposal:**
Add persistent flags:
- --verbose / -v: Enable debug output
- --quiet / -q: Suppress non-essential output

**Implementation:**
- Add to rootCmd.PersistentFlags()
- Replace BD_VERBOSE checks with flag checks
- Standardize output levels:
  * Quiet: Errors only
  * Normal: Errors + success messages
  * Verbose: Errors + success + debug info

**Files to modify:**
- cmd/bd/main.go (add flags)
- internal/debug/debug.go (respect flags)
- Update all commands to respect quiet mode

**Testing:**
- Verify --verbose shows debug output
- Verify --quiet suppresses normal output
- Ensure errors always show regardless of mode


Add tests for daemon lifecycle module


Implement bd resolve-conflicts (git merge conflicts in JSONL)

Automatically detect and resolve git merge conflicts in .beads/issues.jsonl file.

Features:
- Detect conflict markers in JSONL
- Parse conflicting issues from HEAD and BASE
- Provide mechanical resolution (remap duplicate IDs)
- Support AI-assisted resolution (requires internal/ai package)

See repair_commands.md lines 125-353 for design.


Speed up main_test.go - tests hang indefinitely due to nil rootCtx

## Problem

main_test.go tests are hanging indefinitely, making them unusable and blocking development.

## Root Cause

Tests that call flushToJSONL() or autoImportIfNewer() hang forever because:
- rootCtx is nil in test environment (defined in cmd/bd/main.go:67)
- flushToJSONL() uses rootCtx for DB operations (autoflush.go:503)
- When rootCtx is nil, DB calls timeout/hang indefinitely

## Affected Tests (10+)

- TestAutoFlushOnExit
- TestAutoFlushJSONLContent
- TestAutoFlushErrorHandling
- TestAutoImportIfNewer
- TestAutoImportDisabled
- TestAutoImportWithUpdate
- TestAutoImportNoUpdate
- TestAutoImportMergeConflict
- TestAutoImportConflictMarkerFalsePositive
- TestAutoImportClosedAtInvariant

## Proof

```bash
# Before fix: TestAutoFlushJSONLContent HANGS (killed after 2+ min)
# After adding rootCtx init: Completes in 0.04s
# Speedup: ∞ → 0.04s
```

## Solution

See MAIN_TEST_OPTIMIZATION_PLAN.md for complete fix plan.

**Quick Fix (5 min)**: Add to each hanging test:
```go
ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second)
defer cancel()
oldRootCtx := rootCtx
rootCtx = ctx
defer func() { rootCtx = oldRootCtx }()
```

**Full Optimization (40 min total)**:
1. Fix rootCtx (5 min) - unblocks tests
2. Reduce sleep durations 10x (2 min) - saves ~280ms
3. Use in-memory DBs (10 min) - saves ~1s
4. Share test fixtures (15 min) - saves ~1.2s
5. Fix skipped debounce test (5 min)

## Expected Results

- Tests go from hanging → <5s total runtime
- Keep critical integration test coverage
- Tests caught real bugs: bd-270, bd-206, bd-160

## Files

- Analysis: MAIN_TEST_REFACTOR_NOTES.md
- Solution: MAIN_TEST_OPTIMIZATION_PLAN.md
- Tests: cmd/bd/main_test.go (18 tests, 1322 LOC)

## Priority

P1 - Blocking development, tests unusable in current state


Document error handling strategy for metadata update failures

Multiple places silently ignore metadata update failures (sync.go:614-617, import.go:320-322) with non-fatal warnings. This is intentional (degrades gracefully to mtime-based approach) but not well documented.

Add comments explaining:
- Why these failures are non-fatal
- How system degrades gracefully
- What the fallback behavior is (mtime-based detection)


Import fails on same-content-different-ID instead of treating as update

## Problem

The importer still has rename detection (importer.go:482-500) that triggers when same content hash has different IDs. With hash IDs, this shouldn't happen, but when it does (test data, bugs, legacy data), the import fails:

```
failed to handle rename bd-ce75 -> bd-5a90: rename collision handling removed - should not occur with hash IDs
```

## Current Behavior

1. Importer finds same content hash with different IDs
2. Calls handleRename() (line 490)
3. handleRename() errors out (line 294): "rename collision handling removed"
4. Import fails

## Expected Behavior

Same content hash + different IDs should be treated as an **update**, not a rename:
- Keep existing ID (already in database)
- Update fields if incoming has newer timestamp
- Discard incoming ID (it's wrong - hash should have generated same ID)

## Impact

- Import fails on legitimate edge cases (test data, data corruption)
- Cryptic error message
- Blocks sync operations

## Fix

In handleRename() or import loop, instead of erroring:
```go
// Same content, different ID - treat as update
if incoming.UpdatedAt.After(existing.UpdatedAt) {
    existing.Status = incoming.Status
    // ... copy other fields
    s.UpdateIssue(ctx, existing)
}
result.Updated++
```

## Files
- internal/importer/importer.go:271-294 (handleRename)
- internal/importer/importer.go:482-500 (rename detection)

## Repro
Import JSONL with bd-ce75 and bd-5a90 (both "Test parent issue" but different content hashes).


Remove unreachable RPC methods

Several RPC server and client methods are unreachable and should be removed:

Server methods (internal/rpc/server.go):
- `Server.GetLastImportTime` (line 2116)
- `Server.SetLastImportTime` (line 2123)
- `Server.findJSONLPath` (line 2255)

Client methods (internal/rpc/client.go):
- `Client.Import` (line 311) - RPC import not used (daemon uses autoimport)

Evidence:
```bash
go run golang.org/x/tools/cmd/deadcode@latest -test ./...
```

Impact: Removes ~80 LOC of unused RPC code


Investigate database pollution - issue count anomalies

Multiple repos showing inflated issue counts suggesting cross-repo pollution:
- ~/src/dave/beads: 895 issues (675 open) - clearly polluted
- ~/src/stevey/src/beads: 280 issues (expected ~209-220) - possibly polluted

Need to investigate:
1. Source of pollution (multi-repo sync issues?)
2. How many duplicate/foreign issues exist
3. Whether recent sync operations caused cross-contamination
4. How to clean up and prevent future pollution

Investigation findings:

**Root cause identified:**
- NOT cross-repo contamination
- NOT automated test leakage (tests properly use t.TempDir())
- Manual testing during template feature development (Nov 2-4)
- Commit ba325a2: "test issues were accidentally committed during template feature development"

**Database growth timeline:**
- Nov 3: 19 issues (baseline)
- Nov 2-5: +244 issues (massive development spike)
- Nov 6-7: +40 issues (continued growth)
- Current: 291 issues → 270 after cleanup

**Test pollution breakdown:**
- 21 issues matching "Test " prefix pattern
- Most created Nov 2-5 during feature development
- Pollution from manual `./bd create "Test issue"` commands in production workspace
- All automated tests properly isolated with t.TempDir()

**Cleanup completed:**
- Ran scripts/cleanup-test-pollution.sh successfully
- Removed 21 test issues
- Database reduced from 291 → 270 issues (7.2% cleanup)
- JSONL synced to git

**Prevention strategy:**
- Filed follow-up issue for prevention mechanisms
- Script can be deleted once prevention is in place
- Tests are already properly isolated - no code changes needed there


File change test issue


Add LastBdVersion field to Config struct


bd show --json doesn't include dependency type field

Fix GitHub issue #202. The JSON output from bd show and bd list commands should include the dependency type field (and optionally created_at, created_by) to match internal storage format and enable better tooling integration.

PR #203 updated with cleaner implementation: https://github.com/steveyegge/beads/pull/203

## Final Implementation

Cleanest possible approach - no internal helper methods needed:

**Design:**
- `GetDependenciesWithMetadata()` / `GetDependentsWithMetadata()` - canonical implementations with full SQL query
- `GetDependencies()` / `GetDependents()` - thin wrappers that strip metadata for backward compat
- `scanIssuesWithDependencyType()` - shared helper for scanning rows with dependency type

**Benefits:**
- Single source of truth - the `...WithMetadata()` methods ARE the implementation
- Eliminated ~139 lines of duplicated SQL and scanning code
- All tests passing (14 dependency-related tests)
- Backward compatible
- dependency_type field appears correctly in JSON output

**Note on scan helpers:**
The duplication between `scanIssues()` and `scanIssuesWithDependencyType()` is necessary because they handle different SQL result shapes (16 vs 17 columns). This is justified as they serve fundamentally different purposes based on query structure.


Run tests to ensure refactoring didn't break anything


Channel isolation test - beads

Resetting stale in_progress status from old executor run (13 days old)


Add validation and documentation for metadata key format

## Issues

### 1. No validation that keySuffix doesn't contain separator
```go
if keySuffix != "" {
    hashKey += ":" + keySuffix  // ❌ What if keySuffix contains ":"?
}
```

Add validation:
```go
if strings.Contains(keySuffix, ":") {
    return fmt.Errorf("keySuffix cannot contain ':' separator")
}
```

### 2. Inconsistent keySuffix semantics
Empty string means "global", non-empty means "scoped". Better to always pass explicit key:
```go
const (
    SingleRepoKey = "."
    // Multi-repo uses source_repo identifier
)
```

### 3. Metadata key format not documented
Need to document:
- `last_import_hash` - single-repo mode
- `last_import_hash:<repo_key>` - multi-repo mode
- `last_import_time` - when last import occurred
- `last_import_mtime` - fast-path optimization

Add to internal/storage/sqlite/schema.go or docs/


Vendor beads-merge Go code into internal/merge/

Copy beads-merge source code from @neongreen's repo into bd codebase.

**Tasks**:
- Create `internal/merge/` package
- Copy merge algorithm code
- Add attribution header to all files
- Update imports to use bd's internal types
- Add LICENSE/ATTRIBUTION file crediting @neongreen
- Keep original algorithm intact

**Source**: https://github.com/neongreen/mono/tree/main/beads-merge


Add is_tombstone flag to schema

Optionally add is_tombstone boolean field to issues table. Marks resurrected parents that were deleted. Allows distinguishing tombstones from normal deleted issues. Update schema.go and create migration.


Extract duplicated metadata update code in daemon_sync.go

## Problem
The same 22-line metadata update block appears identically in both:
- createExportFunc (lines 309-328)
- createSyncFunc (lines 520-539)

This violates DRY principle and makes maintenance harder.

## Solution
Extract to helper function:

```go
// updateExportMetadata updates last_import_hash and related metadata after a successful export.
// This prevents "JSONL content has changed since last import" errors on subsequent exports (bd-ymj fix).
func updateExportMetadata(ctx context.Context, store storage.Storage, jsonlPath string, log daemonLogger) {
    currentHash, err := computeJSONLHash(jsonlPath)
    if err != nil {
        log.log("Warning: failed to compute JSONL hash for metadata update: %v", err)
        return
    }

    if err := store.SetMetadata(ctx, "last_import_hash", currentHash); err != nil {
        log.log("Warning: failed to update last_import_hash: %v", err)
    }

    exportTime := time.Now().Format(time.RFC3339)
    if err := store.SetMetadata(ctx, "last_import_time", exportTime); err != nil {
        log.log("Warning: failed to update last_import_time: %v", err)
    }

    // Store mtime for fast-path optimization
    if jsonlInfo, statErr := os.Stat(jsonlPath); statErr == nil {
        mtimeStr := fmt.Sprintf("%d", jsonlInfo.ModTime().Unix())
        if err := store.SetMetadata(ctx, "last_import_mtime", mtimeStr); err != nil {
            log.log("Warning: failed to update last_import_mtime: %v", err)
        }
    }
}
```

## Files
- cmd/bd/daemon_sync.go

## Benefits
- Easier maintenance
- Single source of truth
- Consistent behavior


Auth tokens expire too quickly

## Summary

[Brief description of the bug]

## Steps to Reproduce

1. Step 1
2. Step 2
3. Step 3

## Expected Behavior

[What should happen]

## Actual Behavior

[What actually happens]

## Environment

- OS: [e.g., macOS 15.7.1]
- Version: [e.g., bd 0.20.1]
- Additional context: [any relevant details]

## Additional Context

[Screenshots, logs, or other relevant information]


Add performance benchmarks for multi-repo hydration

The contributor-workflow-analysis.md asserts sub-second queries (line 702) and describes smart caching via file mtime tracking (Decision #4, lines 584-618), but doesn't provide concrete performance benchmarks.

VC's requirement (from VC feedback section):
- Executor polls GetReadyWork() every 5-10 seconds
- Queries must be sub-second (ideally <100ms)
- Smart caching must avoid re-parsing JSONLs on every query

Suggested performance targets to validate:
- File stat overhead: <1ms per repo
- Hydration (when needed): <500ms for typical JSONL (<25k)
- Query (from cache): <10ms
- Total GetReadyWork(): <100ms (VC's requirement)

Also test at scale:
- N=1 repo (baseline)
- N=3 repos (typical)
- N=10 repos (edge case)

These benchmarks are critical for library consumers like VC that run automated polling loops.


Default to YES for git hooks and merge driver installation

Currently bd init prompts user to install git hooks and merge driver, but setup is incomplete if user declines. Change to install by default unless --skip-hooks or --skip-merge-driver flags are passed. Better safe defaults. If installation fails, warn user and suggest bd doctor --fix.


Improve CheckStaleness error handling

## Problem

CheckStaleness returns 'false' (not stale) for multiple error conditions instead of returning errors. This masks problems.

**Location:** internal/autoimport/autoimport.go:253-285

## Edge Cases That Return False

1. **Invalid last_import_time format** (line 259-262)
2. **No JSONL file found** (line 267-277)
3. **JSONL stat fails** (line 279-282)

## Fix

Return errors for abnormal conditions:

```go
lastImportTime, err := time.Parse(time.RFC3339, lastImportStr)
if err != nil {
    return false, fmt.Errorf("corrupted last_import_time: %w", err)
}

if jsonlPath == "" {
    return false, fmt.Errorf("no JSONL file found")
}

stat, err := os.Stat(jsonlPath)
if err != nil {
    return false, fmt.Errorf("cannot stat JSONL: %w", err)
}
```

## Impact
Medium - edge cases are rare but should be handled

## Effort
30 minutes - requires updating callers in RPC server


Switch from modernc.org/sqlite to ncruces/go-sqlite3 for WASM support

modernc.org/sqlite depends on modernc.org/libc which has no js/wasm support (platform-specific syscalls). Need to switch to ncruces/go-sqlite3 which wraps a WASM build of SQLite using wazero runtime.

Key differences:
- ncruces/go-sqlite3: Uses WASM build of SQLite + wazero runtime
- modernc.org/sqlite: Pure Go translation, requires libc for syscalls

This is a prerequisite for bd-62a0 (WASM build infrastructure).


Benchmark Suite for Critical Operations

Extend existing benchmark suite with comprehensive benchmarks for critical operations at 10K-20K scale.

Existing benchmarks (keep these):
- cycle_bench_test.go - Cycle detection up to 5K issues (linear, tree, dense graphs)
- compact_bench_test.go - Compaction candidate queries (100 issues)
- internal/rpc/bench_test.go - Daemon vs direct mode comparison

New benchmarks to add in sqlite_bench_test.go (~10-12 total):
1. GetReadyWork - Simple, deep hierarchies, cross-linked (CRITICAL - not currently benchmarked)
2. SearchIssues - No filters, complex filters (CRITICAL - not currently benchmarked)
3. CreateIssue - Single issue creation
4. UpdateIssue - Status/priority/assignee changes
5. AddDependency - Extend to 10K/20K scale (currently only up to 5K)
6. JSONL Export - Full export performance
7. JSONL Import - Import performance

Scale levels:
- Large: 10K issues (5K open, 5K closed)
- XLarge: 20K issues (10K open, 10K closed)

Implementation:
- NEW FILE: internal/storage/sqlite/sqlite_bench_test.go
- Keep existing cycle_bench_test.go and compact_bench_test.go unchanged
- Build tag: //go:build bench
- Standard testing.B benchmarks
- b.ReportAllocs() for memory tracking
- Test both SQLite and JSONL-imported databases

Always generates CPU and memory profiles for analysis.