Polecats should spawn with auto-accept mode enabled

During swarm bd-784c, polecats (Toast, Nux) were spawned without --dangerously-skip-permissions or equivalent auto-accept mode.

**Problem:**
Every edit, bash command, and tool use required manual confirmation via tmux send-keys. This defeats the purpose of autonomous polecat operation.

**Expected:**
Polecats in a swarm should run with permissions bypassed so they can work autonomously.

**Workaround used:**
- Manually sent Enter keys via tmux to accept prompts
- Eventually polecats entered 'bypass permissions on' mode after restart

**Suggestion:**
- gt sling should pass --dangerously-skip-permissions by default for polecats
- Or polecats should have a .claude/settings.local.json pre-configured for auto-accept


gt handoff deadlock at handoff.go:125

When running 'gt handoff -m "message"' after successful MR submit, go panics with 'fatal error: all goroutines are asleep - deadlock\!' at handoff.go:125. The shutdown request still appears to be sent successfully but the command crashes. Stack trace shows issue is in runHandoff select statement.


Make merge requests ephemeral wisps instead of permanent issues

## Problem

Merge requests (MRs) are currently created as regular beads issues (type: merge-request). This means they:
- Sync to JSONL and propagate via git
- Accumulate in the issue database indefinitely
- Clutter `bd list` output with closed MRs
- Create permanent records for inherently transient artifacts

MRs are process artifacts, not work products. They exist briefly while code awaits merge, then their purpose is fulfilled. The git merge commit and GitHub PR (if applicable) provide the permanent audit trail - the beads MR is redundant.

## Proposed Solution

Make MRs ephemeral wisps that exist only during the merge process:

1. **Create MRs as wisps**: When a polecat completes work and requests merge, create the MR in `.beads-wisp/` instead of `.beads/`

2. **Refinery visibility**: This works because all clones within a rig share the same database:
   ```
   beads/              ← Rig root
   ├── .beads/         ← Permanent issues (synced to JSONL)
   ├── .beads-wisp/    ← Ephemeral wisps (NOT synced)
   ├── crew/dave/      ← Uses rig's shared DB
   ├── polecats/*/     ← Uses rig's shared DB
   └── refinery/       ← Uses rig's shared DB
   ```
   The refinery can see wisp MRs immediately - same SQLite database.

3. **On merge completion**: Burn the wisp (delete without digest). The git merge commit IS the permanent record. No digest needed since:
   - Digest wouldn't be smaller than the MR itself (~200-300 bytes either way)
   - Git history provides complete audit trail
   - GitHub PR (if used) provides discussion/approval record

4. **On merge rejection/abandonment**: Burn the wisp. Optionally notify the source polecat via mail.

## Benefits

- **Clean JSONL**: MRs never pollute the permanent issue history
- **No accumulation**: Wisps are burned on completion, no cleanup needed
- **Correct semantics**: Wisps are for "operational ephemera" - MRs fit perfectly
- **Reduced sync churn**: Fewer JSONL updates, faster `bd sync`
- **Cleaner queries**: `bd list` shows work items, not process artifacts

## Implementation Notes

### Where MRs are created

Currently MRs are created by the witness or polecat when work is ready for merge. This code needs to:
- Set `wisp: true` on the MR issue
- Or use a dedicated wisp creation path

### Refinery changes

The refinery queries for pending MRs to process. It needs to:
- Query wisp storage as well as (or instead of) permanent storage
- Use `bd mol burn` or equivalent to delete processed MRs

### What about cross-rig MRs?

If an MR needs to be visible outside the rig (e.g., external collaborators):
- They would see the GitHub PR anyway
- Or we could create a permanent "merge completed" notification issue
- But this is likely unnecessary - MRs are internal coordination

### Migration

Existing MRs in permanent storage:
- Can be cleaned up with `bd cleanup` or manual deletion
- Or left to age out naturally
- No migration of open MRs needed (they'll complete under old system

## Alternatives Considered

1. **Auto-cleanup of closed MRs**: Keep MRs as permanent issues but auto-delete after 24h. Simpler but still creates sync churn and temporary JSONL pollution.

2. **MRs as mail only**: Polecat sends mail to refinery with merge details, no MR issue at all. Loses queryability (bd-801b [P2] [merge-request] closed - Merge: bd-bqcc
bd-pvu0 [P2] [merge-request] closed - Merge: bd-4opy
bd-i0rx [P2] [merge-request] closed - Merge: bd-ao0s
bd-u0sb [P2] [merge-request] closed - Merge: bd-uqfn
bd-8e0q [P2] [merge-request] closed - Merge: beads-ocs
bd-hvng [P2] [merge-request] closed - Merge: bd-w193
bd-4sfl [P2] [merge-request] closed - Merge: bd-14ie
bd-sumr [P2] [merge-request] closed - Merge: bd-t4sb
bd-3x9o [P2] [merge-request] closed - Merge: bd-by0d
bd-whgv [P2] [merge-request] closed - Merge: bd-401h
bd-f3ll [P2] [merge-request] closed - Merge: bd-ot0w
bd-fmdy [P3] [merge-request] closed - Merge: bd-kzda).

3. **Separate merge queue**: Refinery maintains internal state for pending merges, not in beads at all. Clean but requires new infrastructure.

Wisps are the cleanest solution - they already exist, have the right semantics, and require minimal changes.

## Related

- Wisp architecture:
- Current MR creation: witness/refinery code paths
- bd-pvu0, bd-801b: Example MRs currently in permanent storage
EOF
)


Verify npm package

Confirm npm package published.

```bash
npm show @beads/bd version
```

Should show 0.41.0.

Also check: https://www.npmjs.com/package/@beads/bd


Introduce slog for structured daemon logging.

## Current State
Daemon uses fmt.Fprintf for logging:
```go
fmt.Fprintf(os.Stderr, "Warning: failed to detect user role: %v\n", err)
fmt.Fprintf(logFile, "[%s] %s\n", time.Now().Format(time.RFC3339), msg)
```

This produces unstructured, hard-to-parse logs.

## Target State
Use Go 1.21+ slog for structured logging:
```go
slog.Warn("failed to detect user role", "error", err)
slog.Info("sync completed", "created", 5, "updated", 3, "duration_ms", 150)
```

## Implementation

### 1. Create logger setup (internal/daemon/logger.go)

```go
package daemon

import (
    "io"
    "log/slog"
    "os"
)

// SetupLogger configures the daemon logger.
// Returns a cleanup function to close the log file.
func SetupLogger(logPath string, jsonFormat bool, level slog.Level) (func(), error) {
    var w io.Writer = os.Stderr
    var cleanup func()

    if logPath \!= "" {
        f, err := os.OpenFile(logPath, os.O_CREATE|os.O_APPEND|os.O_WRONLY, 0600)
        if err \!= nil {
            return nil, err
        }
        w = io.MultiWriter(os.Stderr, f)
        cleanup = func() { f.Close() }
    }

    var handler slog.Handler
    opts := &slog.HandlerOptions{Level: level}

    if jsonFormat {
        handler = slog.NewJSONHandler(w, opts)
    } else {
        handler = slog.NewTextHandler(w, opts)
    }

    slog.SetDefault(slog.New(handler))

    return cleanup, nil
}
```

### 2. Add log level flag

In cmd/bd/daemon.go:
```go
daemonCmd.Flags().String("log-level", "info", "Log level (debug, info, warn, error)")
daemonCmd.Flags().Bool("log-json", false, "Output logs in JSON format")
```

### 3. Replace fmt.Fprintf with slog calls

**Pattern 1: Simple messages**
```go
// Before
fmt.Fprintf(os.Stderr, "Starting daemon on %s\n", socketPath)

// After
slog.Info("starting daemon", "socket", socketPath)
```

**Pattern 2: Errors**
```go
// Before
fmt.Fprintf(os.Stderr, "Error: failed to connect: %v\n", err)

// After
slog.Error("failed to connect", "error", err)
```

**Pattern 3: Debug info**
```go
// Before
if debug {
    fmt.Fprintf(os.Stderr, "Received request: %s\n", method)
}

// After
slog.Debug("received request", "method", method)
```

**Pattern 4: Structured data**
```go
// Before
fmt.Fprintf(logFile, "Import: %d created, %d updated\n", created, updated)

// After
slog.Info("import completed",
    "created", created,
    "updated", updated,
    "unchanged", unchanged,
    "duration_ms", duration.Milliseconds())
```

### 4. Files to Update

| File | Changes |
|------|---------|
| cmd/bd/daemon.go | Add log flags, call SetupLogger |
| internal/daemon/server.go | Replace fmt with slog |
| internal/daemon/rpc_handler.go | Replace fmt with slog |
| internal/daemon/sync.go | Replace fmt with slog |
| internal/daemon/autoflush.go | Replace fmt with slog |
| internal/daemon/logger.go | New file |

### 5. Log output examples

**Text format (default):**
```
time=2025-12-23T12:30:00Z level=INFO msg="daemon started" socket=/tmp/bd.sock pid=12345
time=2025-12-23T12:30:01Z level=INFO msg="import completed" created=5 updated=3 duration_ms=150
time=2025-12-23T12:30:05Z level=WARN msg="sync branch diverged" local_ahead=2 remote_ahead=1
```

**JSON format (--log-json):**
```json
{"time":"2025-12-23T12:30:00Z","level":"INFO","msg":"daemon started","socket":"/tmp/bd.sock","pid":12345}
{"time":"2025-12-23T12:30:01Z","level":"INFO","msg":"import completed","created":5,"updated":3,"duration_ms":150}
```

## Migration Strategy

1. **Add logger.go** with SetupLogger
2. **Update daemon startup** to initialize slog
3. **Convert one file at a time** (start with server.go)
4. **Test after each file**
5. **Remove old logging code** once all converted

## Testing

```bash
# Start daemon with debug logging
bd daemon start --log-level debug

# Check logs
bd daemons logs . | head -20

# Test JSON output
bd daemon start --log-json --log-level debug
bd daemons logs . | jq .
```

## Success Criteria
- All daemon logging uses slog
- --log-level controls verbosity
- --log-json produces machine-parseable output
- Log entries have consistent structure
- No fmt.Fprintf to stderr in daemon code


Ghost resurrection: remote status:closed wins during git merge

During bd sync, the 3-way git merge sometimes keeps remote's status:closed instead of local's status:tombstone. This causes ghost issues to resurrect even when tombstones exist.

Root cause: Git 3-way merge doesn't understand tombstone semantics. If base had closed, local changed to tombstone, and remote has closed, git might keep remote's version.

The early tombstone check in importer.go only prevents CREATION when tombstones exist in DB. But if applyDeletionsFromMerge hard-deletes the tombstones before import runs (because they're not in the merged result), the check doesn't help.

Potential fixes:
1. Make tombstones 'win' in the beads merge driver (internal/merge/merge.go)
2. Don't hard-delete tombstones in applyDeletionsFromMerge if they're in the DB
3. Export tombstones to a separate file that's not subject to merge

Ghost issues: bd-cb64c226.*, bd-cbed9619.*


Test suite hangs/never finishes

Running 'go test ./... -count=1' hangs indefinitely. The full test suite never completes, making it difficult to verify changes. Need to investigate which tests are hanging and fix or add timeouts.


Version Bump: 0.32.1

Release checklist for version 0.32.1. Patch release with MCP output control params and pin field fix.


Workaround for FastMCP outputSchema bug in Claude Code

The beads MCP server (v0.23.1) successfully connects to Claude Code, but all tools fail to load with a schema validation error due to a bug in FastMCP 2.13.1.

Error: "Invalid literal value, expected \"object\"" in outputSchema.

Root Cause: FastMCP generates outputSchema with $ref at root level without "type": "object" for self-referential models (Issue).

Workaround: Use slash commands (/beads:ready) or wait for FastMCP fix.


bd validate - Comprehensive health check

Run all validation checks in one command.

Checks:
- Duplicates
- Orphaned dependencies
- Test pollution
- Git conflicts

Supports --fix-all for auto-repair.

Depends on bd-cbed9619.1, bd-0dcea000, bd-31aab707, bd-9826b69a.

Files: cmd/bd/validate.go (new)


Cache GetGitDir() for additional optimization

Code review finding from bd-7di fix.

GetGitDir() at line 17 is not cached but is called by:
- GetGitHooksDir()
- GetGitRefsDir()
- GetGitHeadPath()

If any of those are called multiple times, we still spawn extra git processes. Consider adding sync.Once caching similar to the other functions.

File: internal/git/gitdir.go


Ephemeral patrol molecules leaking into beads

## Problem

Ephemeral patrol orchestration molecules (e.g., mol-deacon-patrol, wisp step issues) keep appearing in `bd ready` output in gastown beads.

These are ephemeral/wisp issues that should:
1. Never be synced to the beads-sync branch
2. Live only in .beads-wisp/ (ephemeral storage)
3. Be squashed to digests, not persisted as regular beads

## Examples found

- gt-wisp-6ue: mol-deacon-patrol
- gt-pacdm: mol-deacon-patrol
- gt-wisp-mpm: Check own context limit
- gt-wisp-lkc: Clean dead sessions

## Investigation needed

1. Where are these being created? (gt mol bond? manual bd create?)
2. Why are they using the gt- prefix instead of staying ephemeral?
3. Is the wisp storage (.beads-wisp/) being used correctly?
4. Is bd sync accidentally picking up ephemeral issues?

## Expected behavior

Patrol molecules and their steps should be ephemeral and never appear in `bd ready` or `bd list`.


Upgrade beads-mcp

pip3 install --upgrade beads-mcp


Add bd refile command to move issues between rigs

Add a `bd refile <source-id> <target-rig>` command to move issues between rigs.

Beads already has the routing infrastructure:
- ResolveBeadsDirForID - routes reads by prefix
- ResolveBeadsDirForRig - routes writes by rig name
- GetRoutedStorageForID - opens cross-rig storage connections

Implementation:
1. Get source issue via routing
2. Create new issue in target rig (existing --prefix mechanism)
3. Close source issue with 'Refiled to <new-id>'
4. Optionally: migrate deps, link the two issues

This is pure beads - no gastown involvement needed.


bd cook: waits_for field not preserved in cooked protos

The `waits_for` field in formula steps is not preserved in the cooked proto.

## Formula

```yaml
- id: aggregate
  title: Aggregate arm results
  needs: [survey-workers]
  waits_for: all-children
  description: |
    This is a **fanout gate**...
```

## Expected

The cooked proto step should have metadata indicating it's a gate:
- Label: `gate:all-children` or
- Field in issue metadata indicating wait behavior

## Actual

The `waits_for` field is silently ignored. Only the description mentions 'fanout gate'.

## Impact

The execution engine cannot determine which steps are gates that need to wait
for dynamically-bonded children. This breaks the Christmas Ornament pattern
where aggregate steps must wait for all polecat-arm wisps to complete.

## Related

bd-hr39: needs field not converted to step dependencies


bd close hooks: context check and notifications

Add hook system to bd close for notifications and custom actions.

## Scope (MVP)

Implement **command hooks only** for bd close. Deferred: notify, webhook types.

## Implementation

### 1. Config Schema

Add to internal/configfile/config.go:

```go
type HooksConfig struct {
    OnClose []HookEntry `yaml:"on_close,omitempty"`
}

type HookEntry struct {
    Command string `yaml:"command"`           // Shell command to run
    Name    string `yaml:"name,omitempty"`    // Optional display name
}
```

Add `Hooks HooksConfig` field to Config struct.

### 2. Hook Execution

Create internal/hooks/close_hooks.go:

```go
func RunCloseHooks(ctx context.Context, cfg *configfile.Config, issue *types.Issue) error {
    for _, hook := range cfg.Hooks.OnClose {
        cmd := exec.CommandContext(ctx, "sh", "-c", hook.Command)
        cmd.Env = append(os.Environ(),
            "BEAD_ID="+issue.ID,
            "BEAD_TITLE="+issue.Title,
            "BEAD_TYPE="+string(issue.IssueType),
            "BEAD_PRIORITY="+strconv.Itoa(issue.Priority),
            "BEAD_CLOSE_REASON="+issue.CloseReason,
        )
        cmd.Stdout = os.Stdout
        cmd.Stderr = os.Stderr
        if err := cmd.Run(); err \!= nil {
            // Log warning but dont fail the close
            fmt.Fprintf(os.Stderr, "Warning: close hook %q failed: %v\n", hook.Name, err)
        }
    }
    return nil
}
```

### 3. Integration Point

In cmd/bd/close.go, after successful close:

```go
// Run close hooks
if cfg := configfile.Load(); cfg \!= nil {
    hooks.RunCloseHooks(ctx, cfg, closedIssue)
}
```

### 4. Example Config

```yaml
# .beads/config.yaml
hooks:
  on_close:
    - name: show-next
      command: bd ready --limit 1
    - name: context-check
      command: echo "Issue $BEAD_ID closed. Check context if nearing limit."
```

## Environment Variables

| Variable | Description |
|----------|-------------|
| BEAD_ID | Issue ID (e.g., bd-abc1) |
| BEAD_TITLE | Issue title |
| BEAD_TYPE | Issue type (task, bug, feature, etc.) |
| BEAD_PRIORITY | Priority (0-4) |
| BEAD_CLOSE_REASON | Close reason if provided |

## Testing

Add test in internal/hooks/close_hooks_test.go:
- Test hook execution with mock config
- Test env vars are set correctly
- Test hook failure doesnt block close

## Files to Create/Modify

1. **Create:** internal/hooks/close_hooks.go
2. **Create:** internal/hooks/close_hooks_test.go
3. **Modify:** internal/configfile/config.go (add HooksConfig)
4. **Modify:** cmd/bd/close.go (call RunCloseHooks)
5. **Modify:** docs/CONFIG.md (document hooks config)

## Out of Scope (Future)

- notify hook type (gt mail integration)
- webhook type (HTTP POST)
- on_create, on_update hooks
- Hook timeout configuration
- Parallel hook execution


GH#403: bd doctor --fix circular error message

bd doctor --fix suggests running bd doctor --fix for deletions manifest issue. Fix to provide actual resolution. See GitHub issue #403.


Update integrations/beads-mcp/pyproject.toml to 0.30.4

Update version in pyproject.toml:
```toml
version = "0.30.4"
```

```verify
grep -q 'version = "0.30.4"' integrations/beads-mcp/pyproject.toml
```


Add bd template list command

Add a convenience command to list available templates:

bd template list

This is equivalent to 'bd list --label=template' but more discoverable.
Could also show variable placeholders found in each template.


Upgrade local Homebrew installation

Upgrade bd via Homebrew:

```bash
brew update
brew upgrade bd
/opt/homebrew/bin/bd version  # Verify shows 0.33.2
```


doctor --fix should export when DB has more issues than JSONL

When 'bd doctor' detects a count mismatch (DB has more issues than JSONL), it currently recommends 'bd sync --import-only', which imports JSONL into DB. But JSONL is the source of truth, not the DB.

**Current behavior:**
- Doctor detects: DB has 355 issues, JSONL has 292
- Recommends: 'bd sync --import-only'
- User runs it: Returns '0 created, 0 updated' (no-op, because JSONL hasn't changed)
- User is stuck

**Root cause:**
The doctor fix is one-directional (JSONL→DB) when it should be bidirectional. If DB has MORE issues, they haven't been exported yet - the fix should be 'bd export' (DB→JSONL), not import.

**Desired fix:**
In fix.DBJSONLSync(), detect which has more data:
- If DB > JSONL: Run 'bd export' to sync JSONL (since DB is the working copy)
- If JSONL > DB: Run 'bd sync --import-only' to import (JSONL is source of truth)
- If equal but timestamps differ: Detect based on file mtime

This makes 'bd doctor --fix' actually fix the problem instead of being a no-op.


Rename 'template instantiate' to 'mol bond'

Rename the template instantiation command to match molecule metaphor.

Current: bd template instantiate <id> --var key=value
Target:  bd mol bond <id> --var key=value

Changes needed:
- Add 'mol' command group (or extend existing)
- Add 'bond' subcommand that wraps template instantiate logic
- Keep 'template instantiate' as deprecated alias for backward compat
- Update help text and docs to use molecule terminology

The 'bond' verb captures:
1. Chemistry metaphor (molecules bond to form structures)
2. Dependency linking (child issues bonded in a DAG)
3. Short and active

See also: molecule execution model in Gas Town


Merge: topaz-1767106269860

branch: polecat/topaz-1767106269860
target: main
source_issue: topaz-1767106269860
rig: beads


CLI API Audit for OSS Launch

Comprehensive CLI API audit before OSS launch.

## Tasks
1. Review gt command groupings - propose consolidation
2. Review bd command groupings
3. Document gt vs bd ownership boundaries
4. Identify naming inconsistencies
5. Document flag vs subcommand criteria

## Context
- Pre-OSS launch cleanup
- Goal: clean, consistent, discoverable CLI surface


Create bd admin parent command and nest cleanup/compact/reset

## Task
Create new `bd admin` parent command and move:
- `bd cleanup` → `bd admin cleanup`
- `bd compact` → `bd admin compact`
- `bd reset` → `bd admin reset`

## Implementation

### 1. Create admin.go
New file with parent command:
```go
var adminCmd = &cobra.Command{
    Use:   "admin",
    Short: "Administrative commands for database maintenance",
    Long: `Administrative commands for beads database maintenance.

These commands are for advanced users and should be used carefully:
  cleanup   Delete closed issues and prune expired tombstones
  compact   Compact old closed issues to save space
  reset     Remove all beads data and configuration

For routine operations, prefer 'bd doctor --fix'.`,
}

func init() {
    rootCmd.AddCommand(adminCmd)
    adminCmd.AddCommand(cleanupCmd)
    adminCmd.AddCommand(compactCmd)
    adminCmd.AddCommand(resetCmd)
}
```

### 2. Update cleanup.go, compact.go, reset.go
- Remove `rootCmd.AddCommand()` from each init()
- Keep all existing functionality

### 3. Create hidden aliases for backwards compatibility
Top-level hidden commands that forward to admin subcommands.

### 4. Update docs (major updates)
- docs/CLI_REFERENCE.md - cleanup, compact references
- docs/QUICKSTART.md - compact, cleanup references
- docs/FAQ.md - compact references
- docs/TROUBLESHOOTING.md - compact references
- docs/DELETIONS.md - compact reference
- docs/CONFIG.md - compact reference
- skills/beads/SKILL.md - compact reference
- commands/compact.md - update all examples
- examples/compaction/README.md - update examples

## Files to create
- cmd/bd/admin.go

## Files to modify
- cmd/bd/cleanup.go
- cmd/bd/compact.go
- cmd/bd/reset.go
- cmd/bd/main.go (aliases)
- Multiple docs (see list above)


Time-dependent worktree detection tests may be flaky


Rename 'wisp' back to 'ephemeral' in beads API

The beads API uses 'wisp' terminology (Wisp field, bd wisp command) but the underlying SQLite column is 'ephemeral'.

This creates cognitive overhead since wisp is a Gas Town concept.

Rename to use 'ephemeral' consistently:
- types.Issue.Wisp → types.Issue.Ephemeral
- JSON field: wisp → ephemeral
- CLI: bd wisp → bd ephemeral (or just use flags on existing commands)

The SQLite column already uses 'ephemeral' so no schema migration needed.


Add daemon RPC endpoints for config and stale check

Two TODOs request daemon RPC endpoints:

1. cmd/bd/create.go:208 - Add RPC method to get config in daemon mode
2. cmd/bd/mol_stale.go:67 - Add RPC endpoint for stale check

These would allow the CLI to query the daemon for configuration and staleness checks instead of reading directly.

Files:
- cmd/bd/create.go:208
- cmd/bd/mol_stale.go:67


Create release tag

Create annotated git tag.

```bash
git tag -a v0.99.0-test -m "Release v0.99.0-test"
```

Verify: `git tag -l | tail -5`


Run tests and linting

Run the full test suite and linter:

```bash
TMPDIR=/tmp go test -short ./...
golangci-lint run ./...
```

Fix any failures. Linting warnings acceptable (see LINTING.md).


Document pinned status in CLI_REFERENCE.md

## Task

The `pinned` status is a valid issue status but is not documented in CLI_REFERENCE.md.

## Current Status Values (from types.go:295-301)

- open
- in_progress
- blocked
- deferred
- closed
- tombstone
- **pinned** ← undocumented

## Definition

`StatusPinned Status = "pinned" // Persistent bead that stays open indefinitely (bd-6v2)`

## Where to Document

Add to the 'Issue Types' or create a new 'Issue Statuses' section in docs/CLI_REFERENCE.md.

## Related

The pinned status is heavily used by gt for hook management (`--status=pinned`).


Fix or remove TestFindJSONLPathDefault (issue #356)

Code health review found .test-skip permanently skips TestFindJSONLPathDefault.

The test references issue #356 about wrong JSONL filename expectations (issues.jsonl vs beads.jsonl).

Test file: internal/beads/beads_test.go

The underlying migration from beads.jsonl to issues.jsonl may be complete, so either:
1. Fix the test expectations
2. Remove the test if no longer needed
3. Document why it remains skipped


Code Review: PR #551 - Persist close_reason to issues table

Code review of PR #551 which fixes close_reason persistence bug.

## Summary
The PR correctly fixes a bug where close_reason was only stored in the events table, not in the issues.close_reason column. This caused `bd show --json` to return empty close_reason.

## What Was Fixed
- ✅ CloseIssue now updates both close_reason and closed_at
- ✅ ReOpenIssue clears both close_reason and closed_at
- ✅ Comprehensive tests added for both storage and CLI layers
- ✅ Clear documentation in queries.go about dual storage strategy

## Quality Assessment
✅ Tests cover both storage layer and CLI JSON output
✅ Handles reopen case (clearing close_reason)
✅ Good comments explaining dual-storage design
✅ No known issues

## Potential Followups
See linked issues for suggestions.


Code smell: Long function flushToJSONLWithState (~280 lines)

The flushToJSONLWithState() function in cmd/bd/autoflush.go (lines 490-772) is ~280 lines with:

1. Multiple nested conditionals
2. Inline helper function definitions (recordFailure, recordSuccess)
3. Complex multi-repo filtering logic
4. Mixed concerns (validation, export, error handling)

Consider breaking into:
- validateJSONLIntegrity() - already exists but could absorb more
- getIssuesToExport(fullExport bool) - determines what to export
- mergeWithExistingJSONL(issueMap, dirtyIDs) - handles incremental merge
- filterByPrefix(issues) - multi-repo prefix filtering
- performExport(issues, jsonlPath) - the actual write
- updateMetadataAfterExport() - hash/timestamp updates

Location: cmd/bd/autoflush.go:490-772


Verify version consistency

Confirm all versions match 0.39.0.

```bash
grep 'Version = ' cmd/bd/version.go
jq -r '.version' .claude-plugin/plugin.json
jq -r '.version' npm-package/package.json
grep 'version = ' integrations/beads-mcp/pyproject.toml
```

All should show 0.39.0.


Create release tag

Create annotated git tag.

```bash
git tag -a v0.39.0 -m "Release v0.39.0"
```

Verify: `git tag -l | tail -5`


Create migration script for edge field to dependency conversion

Migration must:
1. Read existing JSONL with old fields
2. Convert field values to dependency records
3. Write updated JSONL without old fields
4. Handle edge cases (missing refs, duplicates)

Run via: bd migrate or automatic on bd prime


Update CHANGELOG.md with release notes

Add meaningful release notes to CHANGELOG.md describing what changed in {{version}}


Run bump-version.sh

Update all component versions atomically.

```bash
./scripts/bump-version.sh 0.99.0-test
```

This updates:
- cmd/bd/version.go
- .claude-plugin/*.json
- integrations/beads-mcp/pyproject.toml
- integrations/beads-mcp/src/beads_mcp/__init__.py
- npm-package/package.json
- Hook templates
- README.md
- CHANGELOG.md (adds date)


GH#509: bd doesn't find .beads when running from nested worktrees

When worktrees are nested under main repo (.worktrees/feature/), bd stops at worktree git root instead of continuing to find .beads in parent. See GitHub issue #509 for detailed fix suggestion.


Phase 1.1: TOON Library Integration - Add gotoon dependency

Add gotoon (github.com/alpkeskin/gotoon) to go.mod and create internal/toon wrapper package for TOON encoding/decoding. This enables bdtoon to encode Issue structs to TOON format and decode TOON back to issues.

## Subtasks
1. Add gotoon dependency: go get github.com/alpkeskin/gotoon
2. Create internal/toon package with wrapper functions
3. Write encode tests for Issue struct round-trip conversion
4. Write decode tests for TOON to Issue conversion
5. Add gotoon API options to wrapper (indent, delimiter, length markers)

## Success Criteria
- go.mod includes gotoon dependency
- internal/toon/encode.go exports EncodeTOON(issues) ([]byte, error)
- internal/toon/decode.go exports DecodeTOON(data []byte) ([]Issue, error)
- Round-trip tests verify Issue → TOON → Issue produces identical data
- Tests pass with: go test ./internal/toon -v


BondRef data model for compound lineage

Add data model support for tracking compound molecule lineage.

NEW FIELDS on Issue:
  bonded_from: []BondRef  // For compounds: constituent protos

NEW TYPE:
  type BondRef struct {
      ProtoID   string  // Source proto ID
      BondType  string  // sequential, parallel, conditional
      BondPoint string  // Attachment site (issue ID or empty for root)
  }

JSONL SERIALIZATION:
  {
    "id": "proto-feature-tested",
    "title": "Feature with tests",
    "bonded_from": [
      {"proto_id": "proto-feature", "bond_type": "root"},
      {"proto_id": "proto-testing", "bond_type": "sequential"}
    ],
    ...
  }

QUERIES:
- GetCompoundConstituents(id) → []BondRef
- IsCompound(id) → bool
- GetCompoundsUsing(protoID) → []Issue  // Reverse lookup


bd init UX Improvements

bd init leaves users with incomplete setup, requiring manual bd doctor --fix. Issues found: (1) git hooks not installed if user declines prompt, (2) no auto-migration when CLI is upgraded, (3) stale merge driver configs from old versions. Fix by making bd init more robust with better defaults and auto-migration.


bd create --parent allocates colliding child IDs when child_counters not backfilled

GH#728: When explicit child IDs are created (--id bd-test.1) or imported from JSONL, child_counters table isn't updated. Then --parent auto-allocation starts at 1 and collides.

Fix approach: Update child_counters when creating issues with explicit hierarchical IDs that match <parent>.<n> pattern.


Crew worker wolf in beads - human-managed persistent workspace.

role_type: crew
rig: beads
agent_state: idle
hook_bead: null
role_bead: gt-crew-role
cleanup_status: null


Improve clean vs cleanup command naming/documentation

Clarify the difference between bd clean and bd cleanup to reduce user confusion.

**Current state:**
- bd clean: Remove temporary artifacts (.beads/bd.sock, logs, etc.)
- bd cleanup: Delete old closed issues from database

**Options:**
1. Rename for clarity:
   - bd clean → bd clean-temp
   - bd cleanup → bd cleanup-issues

2. Keep names but improve help text and documentation

3. Add prominent warnings in help output

**Preferred approach:** Option 2 (improve documentation)
- Update short/long descriptions in commands
- Add examples to help text
- Update README.md
- Add cross-references in help output

**Files to modify:**
- cmd/bd/clean.go
- cmd/bd/cleanup.go
- README.md or ADVANCED.md


Add global verbosity flags (--verbose, --quiet)

Add consistent verbosity controls across all commands.

**Current state:**
- bd init has --quiet flag
- No other commands have verbosity controls
- Debug output controlled by BD_VERBOSE env var

**Proposal:**
Add persistent flags:
- --verbose / -v: Enable debug output
- --quiet / -q: Suppress non-essential output

**Implementation:**
- Add to rootCmd.PersistentFlags()
- Replace BD_VERBOSE checks with flag checks
- Standardize output levels:
  * Quiet: Errors only
  * Normal: Errors + success messages
  * Verbose: Errors + success + debug info

**Files to modify:**
- cmd/bd/main.go (add flags)
- internal/debug/debug.go (respect flags)
- Update all commands to respect quiet mode

**Testing:**
- Verify --verbose shows debug output
- Verify --quiet suppresses normal output
- Ensure errors always show regardless of mode


Test stdin 2

Description from stdin test


bd sync --from-main fails: unknown flag --no-git-history


Commit and push release

git add -A && git commit && git push to trigger CI


bd activity --town: Aggregated town feed

Add --town flag to bd activity for aggregated cross-rig feed.

Behavior:
- Uses routes.jsonl to discover all rigs
- Aggregates activity from all rig beads
- Essential for Deacon's convoy tracking and cross-rig dep resolution

Usage:
  bd activity --follow --town   # Stream all rig activity

Related: hq-7h8jx (Convoy System epic in town beads)


Test Agent


Merge: bd-m8ro

branch: polecat/max
target: main
source_issue: bd-m8ro
rig: beads


Graph Link: relates_to for knowledge graph

Implement relates_to link type for loose associations.

New command:
- bd relate <id1> <id2> - creates bidirectional relates_to link

Query support:
- bd show <id> --related shows related issues
- bd list --related-to <id>

Storage:
- relates_to stored as JSON array of issue IDs
- Consider: separate junction table for efficiency at scale?

This enables 'see also' connections without blocking or hierarchy.


bd ready resolves external dependencies

Extend bd ready to check external blocked_by references:

1. Parse external:<project>:<capability> from blocked_by
2. Look up project path from external_projects config
3. Check if target project has provides:<capability> label on a closed issue
4. If not satisfied, issue is blocked

Example output:
```bash
bd ready
# gt-xyz: blocked by external:beads:mol-run-assignee (not provided)
# gt-abc: ready
```

Depends on: bd-om4a (external: prefix), bd-66w1 (config)

Part of cross-project dependency system.
See: gastown/docs/cross-project-deps.md


Merge: pearl-mjtmd27a

branch: polecat/pearl-mjtmd27a
target: main
source_issue: pearl-mjtmd27a
rig: beads


Wait for CI

Monitor GitHub Actions for release completion.

https://github.com/steveyegge/beads/actions

Expected time: 5-10 minutes

Watch for:
- Build artifacts (all platforms)
- Test suite pass
- npm publish
- PyPI publish


Add pre-migration orphan cleanup to avoid chicken-and-egg fix failure

## Problem

When the database has orphaned foreign key references (dependencies or labels pointing to non-existent issues), the migration invariant check fails, preventing the database from opening. This creates a chicken-and-egg problem:

1. `bd doctor --fix` tries to open the database
2. Opening triggers migrations with invariant checks
3. Invariant check fails due to orphaned refs
4. Fix never runs because database won't open

## Root Cause

Aggressive tombstone deletion (e.g., deleting ~1000 old tombstones) left behind orphaned:
- 218+ dependencies where issue_id not in issues
- 222+ dependencies where depends_on_id not in issues
- 30+ labels where issue_id not in issues

## Current Workaround

Direct SQL to clean up before bd can run:
```sql
DELETE FROM dependencies WHERE NOT EXISTS (SELECT 1 FROM issues WHERE id = issue_id);
DELETE FROM dependencies WHERE NOT EXISTS (SELECT 1 FROM issues WHERE id = depends_on_id) AND depends_on_id NOT LIKE 'external:%';
DELETE FROM labels WHERE NOT EXISTS (SELECT 1 FROM issues WHERE id = issue_id);
```

## Proposed Fix

Add a pre-migration cleanup step that runs BEFORE invariant checks:
1. Option A: Run orphan cleanup as part of migrations (before invariant check)
2. Option B: Add `bd doctor --force-fix` that bypasses invariant checks
3. Option C: Have invariant check auto-clean orphans instead of failing

Option A is cleanest - orphan cleanup should be part of normal migration.


Update Homebrew formula

After GoReleaser completes, the Homebrew tap should be auto-updated.

If manual update needed:
```bash
./scripts/update-homebrew.sh v0.30.4
```

Or manually update steveyegge/homebrew-beads with new SHA256.

Verify:
```bash
brew update
brew info beads
```


Update molecular chemistry docs with discoveries

Document recent discoveries about molecule/epic relationship and lifecycle:

**Layer Cake (corrected order):**
```
Formulas (YAML compile-time macros)
    ↓
Protos (template label, read-only)
    ↓
Molecules (pour, bond, squash, burn)
    ↓
Epics (parent-child, dependencies) ← DATA PLANE
    ↓
Issues (JSONL, git-backed) ← STORAGE
```

**Key insight:** Molecules work without protos - you can create ad-hoc molecules.
Protos are templates FOR molecules, not the other way around.

**New concepts to document:**
1. Orphan vs Stale matrix (blocking × assigned dimensions)
2. Graph pressure as staleness indicator (not time)
3. Parallelism via absence of depends_on (default parallel, opt-in sequential)
4. progress.Completed/Total are computed, not stored
5. WaitsFor: all-children for dynamic fanout gates

**Common pitfalls for agents:**
- Thinking phases/steps imply sequence (NO - deps do)
- Confusing protos with molecules
- Temporal language inverting dependencies
- Forgetting to squash/burn wisps

**Consider splitting docs:**
- molecules.md → conceptual overview
- formulas.md → YAML syntax reference
- lifecycle.md → pour/squash/burn/bond operations
- patterns.md → Christmas Ornament, factory assembly, etc.


Replace map[string]interface{} with typed JSON response structs

Many CLI commands use map[string]interface{} for JSON output which loses type safety and compile-time error detection.

Files with map[string]interface{}:
- cmd/bd/compact.go (10+ instances)
- cmd/bd/cleanup.go
- cmd/bd/daemons.go
- cmd/bd/daemon_lifecycle.go

Example fix:
```go
// Before
result := map[string]interface{}{
    "status": "ok",
    "count": 42,
}

// After
type CompactResponse struct {
    Status string `json:"status"`
    Count  int    `json:"count"`
}
result := CompactResponse{Status: "ok", Count: 42}
```

Benefits:
- Compile-time type checking
- IDE autocompletion
- Easier refactoring
- Self-documenting API


Runtime bonding: bd mol attach

Attach a molecule to an already-running workflow.

COMMAND: bd mol attach <epic-id> <proto> [--after <issue-id>]

BEHAVIOR:
- Resolve running epic and proto
- Spawn proto as new subtree
- Wire to specified attachment point (or epic root)
- Handle in-progress issues: new work doesn't block completed work

USE CASES:
- Discovered need for docs while implementing feature
- Hotfix needs attaching to release workflow
- Additional testing scope identified mid-flight

FLAGS:
- --after ISSUE: Specific attachment point within epic
- --type: sequential (default) or parallel
- --var: Variables for the attached proto

CONSIDERATIONS:
- What if epic is already closed? Error or reopen?
- What if attachment point issue is closed? Attach as ready-to-work?


gt spawn/crew setup should create .beads/redirect for worktrees

Crew clones and polecats need a .beads/redirect file pointing to the shared beads database (../../mayor/rig/.beads). Currently:

- redirect files can get deleted by git clean
- not auto-created during gt spawn or worktree setup
- missing redirects cause 'no beads database found' errors

Found missing in: gastown/joe, beads/zoey (after git clean)

Fix options:
1. gt spawn creates redirect during worktree setup
2. gt prime regenerates missing redirects
3. bd commands auto-detect worktree and find shared beads

This should be standard Gas Town rig configuration.


Swarm status doesn't update after task completions

During swarm bd-784c, the swarm status remained at '9% (1/11 tasks merged)' even after 5 tasks were completed and closed.

**Observed:**
```
gt swarm status bd-784c
Progress: 9% (1/11 tasks merged)
```

But bd list showed 4+ issues closed:
- bd-j3dj, bd-kkka, bd-1tkd, bd-9btu all closed

**Expected:**
Swarm status should reflect actual completion count, either by:
1. Polling issue status from beads
2. Updating when polecats close issues
3. Updating when commits are pushed to integration branch

**Impact:**
Coordinator (me) had to manually check bd list to know actual progress.


Hooks System

Implement hook system for extensibility.

Hook directory: .beads/hooks/
Hook files (executable scripts):
- on_create - runs after bd create
- on_update - runs after bd update
- on_close - runs after bd close
- on_message - runs after bd mail send

Hook invocation:
- Pass issue ID as first argument
- Pass event type as second argument
- Pass JSON issue data on stdin
- Run asynchronously (dont block command)

Example hook (GGT notification):
  #!/bin/bash
  gt notify --event=$2 --issue=$1

This allows GGT to register notification handlers without Beads knowing about GGT.


Run the version bump script.

Run the version bump script.

```bash
./scripts/bump-version.sh 0.37.0
```

This updates version in all files:
- cmd/bd/version.go
- .claude-plugin/*.json
- integrations/beads-mcp/pyproject.toml
- npm-package/package.json
- Hook templates

instantiated_from: bd-mol-xga
step: bump-version


bd repair command: fix orphaned foreign key refs


Test hooked styling


RemoveDependency fails on external deps - FK violation in dirty_issues

In dependencies.go:225, RemoveDependency marks BOTH issueID and dependsOnID as dirty. For external refs (e.g., external:project:capability), dependsOnID doesn't exist in the issues table. This causes FK violation since dirty_issues.issue_id has FK constraint to issues.id.

Fix: Check if dependsOnID starts with 'external:' and only mark source issue as dirty, matching the logic in AddDependency (lines 162-170).

Repro: bd dep rm <issue> external:project:capability


Add multi-repo target repo switching in bd create

In cmd/bd/create.go:164, there's a TODO to switch to the target repo for multi-repo support when creating issues. Currently the code may not properly handle creating issues in a different repo than the current one.

File: cmd/bd/create.go:164


Add tests for helper functions (GetDirtyIssueHash, GetAllDependencyRecords, export hashes)

Several utility functions have 0% coverage:
- GetDirtyIssueHash (dirty.go)
- GetAllDependencyRecords (dependencies.go)
- GetExportHash, SetExportHash, ClearAllExportHashes (hash.go)

These are lower priority but should have basic coverage.


Design contributor namespace isolation for beads pollution prevention

## Problem

When contributors work on beads-the-project using beads-the-tool, their personal work-tracking issues leak into PRs. The .beads/issues.jsonl is intentionally tracked (it's the project's issue database), but contributors' local issues pollute the diff.

This is a recursion problem unique to self-hosting projects.

## Possible Solutions to Explore

1. **Contributor namespaces** - Each contributor gets a private prefix (e.g., `bd-steve-xxxx`) that's gitignored or filtered
2. **Separate database** - Contributors use BEADS_DIR pointing elsewhere for personal tracking
3. **Issue ownership/visibility flags** - Mark issues as "local-only" vs "project"
4. **Prefix-based filtering** - Configure which prefixes are committed vs ignored

## Design Considerations

- Should be zero-friction for contributors (no manual setup)
- Must not break existing workflows
- Needs to work with sync/collaboration features
- Consider: what if a "personal" issue graduates to "project" issue?

## Expansion Needed

This is a placeholder. Needs detailed design exploration before implementation.


Implement bd mol stale command

Add command to detect complete-but-unclosed molecules.

**Definition of stale:**
A molecule is stale if:
1. All children are closed (Completed >= Total)
2. Root issue is still open
3. Not assigned to anyone
4. Not pinned to any hook
5. AND it's blocking other assigned work (graph pressure)

**Command design:**
```bash
bd mol stale              # List stale mols
bd mol stale --json       # Machine-readable
bd mol stale --blocking   # Only show those blocking other work
bd mol stale --all        # Include orphaned-but-not-blocking
```

**Output:**
```
Stale molecules (complete but unclosed, blocking work):

  bd-xyz  "Version bump v0.36.0"  (blocking: bd-abc, bd-def)
    → Close with: bd close bd-xyz
    → Or squash: bd mol squash bd-xyz

Orphaned molecules (complete but unclosed, not blocking):
  bd-uvw  "Old patrol cycle"
    → Consider: bd mol burn bd-uvw
```

**Implementation:**
1. Query all open issues with children (potential mols)
2. Compute progress for each (Completed vs Total)
3. Filter to complete ones
4. Check assigned_to field
5. Check pinned status (may need gt integration)
6. Check if blocking other assigned work

Does NOT use time-based staleness. Graph pressure only.


Relocate thanks command to bd info --thanks

## Task
Move `bd thanks` → `bd info --thanks`

## Implementation

### 1. Update info.go
- Add `--thanks` flag
- Import thanks.go display logic
- When --thanks flag set, call thanks display function

### 2. Update thanks.go
- Export the display function (rename to public)
- Remove rootCmd.AddCommand()
- Optionally keep as hidden alias

### 3. Update docs
- README.md if mentioned
- CHANGELOG.md - deprecation notice

## Files to modify
- cmd/bd/info.go
- cmd/bd/thanks.go


Add covering index (label, issue_id) for label queries

GetIssuesByLabel joins labels table but requires table lookup after using idx_labels_label.

**Query (labels.go:165):**
```sql
SELECT ... FROM issues i
JOIN labels l ON i.id = l.issue_id
WHERE l.label = ?
```

**Problem:** Current idx_labels_label index doesn't cover issue_id, requiring row lookup.

**Solution:** Add migration:
```sql
CREATE INDEX IF NOT EXISTS idx_labels_label_issue ON labels(label, issue_id);
```

This is a covering index - query can be satisfied entirely from the index without touching the labels table rows.


bd dep add: Auto-resolve cross-rig IDs using routes.jsonl

Currently, adding a dependency to an issue in another rig requires verbose external reference syntax:

```bash
# This fails - can't resolve bd-* from gastown context
bd dep add gt-xyz bd-abc

# This works but is verbose
bd dep add gt-xyz external:beads:bd-abc
```

The town-level routing (~/gt/.beads/routes.jsonl) already knows how to map prefixes to rigs:
```json
{"prefix": "gt-", "path": "gastown/mayor/rig"}
{"prefix": "bd-", "path": "beads/mayor/rig"}
```

Enhancement: When `bd dep add` encounters an ID with a foreign prefix, it should:
1. Check routes.jsonl for the prefix mapping
2. Auto-resolve to external:<project>:<id> internally
3. Allow the simpler `bd dep add gt-xyz bd-abc` syntax

This would make cross-rig dependencies much more ergonomic.


bd mol bond: Dynamic bond with variable substitution

Implement dynamic molecule bonding with runtime variable substitution.

## Command
```bash
bd mol bond <proto-id> <parent-wisp-id> --var key=value --var key2=value2
```

## Behavior
1. Parse proto molecule template
2. Substitute {{key}} placeholders with provided values
3. Create wisp children under the parent molecule
4. Child IDs follow pattern: parent-id.child-ref (e.g., patrol-x7k.arm-ace)
5. Nested children: parent-id.child-ref.step-ref (e.g., patrol-x7k.arm-ace.capture)

## Variable Substitution
- In step titles: "Inspect {{polecat_name}}" -> "Inspect ace"
- In descriptions: Full template substitution
- In Needs directives: Allow referencing parent steps

## Output
```
✓ Bonded mol-polecat-arm to patrol-x7k
  Created: patrol-x7k.arm-ace (5 steps)
```


Preflight: Pull latest

Ensure we're up to date with origin.

```bash
git pull --rebase
```

Resolve any conflicts before proceeding.


Command Set Standardization & Flag Consistency

Comprehensive improvements to bd command set based on 2025 audit findings.

## Background
See docs/command-audit-2025.md for detailed analysis.

## Goals
1. Standardize flag naming and behavior across all commands
2. Add missing flags for feature parity
3. Fix naming confusion
4. Improve consistency in JSON output

## Success Criteria
- All mutating commands support --dry-run (no --preview variants)
- bd update supports label operations
- bd search has filter parity with bd list
- Priority flags accept both int and P0-P4 format everywhere
- JSON output is consistent across all commands


Test refile command

Testing bd refile


bd hook: detect agent from cwd instead of defaulting to $USER

**Problem:**
`bd hook` without `--agent` defaults to `$USER` (e.g., "stevey") instead of detecting the agent identity from the current working directory.

**Expected behavior:**
When running from `/Users/stevey/gt/beads/crew/dave`, the agent should be detected as `beads/crew/dave`.

**Current behavior:**
```bash
$ pwd
/Users/stevey/gt/beads/crew/dave
$ bd hook
Hook: stevey
  (empty)

$ bd hook --agent beads/crew/dave
Hook: beads/crew/dave
  📌 bd-hobo (mol) - open
```

**Fix:**
bd hook should use the same cwd-based agent detection that other commands use (similar to how `gt mail` determines identity from cwd).


Add test files for internal/storage

The internal/storage package has no test files at all. This package provides the storage interface abstraction.

Current coverage: N/A (no test files)
Target: Add basic interface tests


Merge: bd-likt

branch: polecat/Gater
target: main
source_issue: bd-likt
rig: beads


Deferred HOP schema additions (P2/P3)

Deferred from bd-7pwh after review. Add when semantics are clearer and actually needed:

- assignee_ref: Structured EntityRef alongside string assignee
- work_type: 'mutex' vs 'open_competition' (everything is mutex in v0.1)
- crystallizes: bool for work that compounds vs evaporates (can derive from issue_type)
- cross_refs: URIs to beads in other repos (needs federation first)
- skill_vector: []float32 embeddings placeholder (YAGNI)

These can be added later without breaking changes (all optional fields).


Wait for CI to pass

Monitor GitHub Actions - all checks must pass before release artifacts are built


Wisp operations should auto-bypass daemon

During the v0.39.1 release, every wisp operation required --no-daemon flag:

bd --no-daemon mol wisp create beads-release --var version=0.39.1
bd --no-daemon close bd-eph-xxx
bd --no-daemon mol burn bd-eph-bv2

Since wisps are ephemeral (Ephemeral=true) and never exported to JSONL, they are inherently local-only. The daemon cannot help with them anyway.

Proposal: When operating on bd-eph-* issues or wisp subcommands, auto-detect and bypass the daemon. This would:
- Reduce friction in wisp workflows
- Prevent accidental daemon use that would fail anyway
- Make the ephemeral nature more obvious


Verify GitHub release

Check the GitHub releases page.

https://github.com/steveyegge/beads/releases/tag/v0.41.0

Verify:
- Release created
- Binaries attached (linux, darwin, windows)
- Checksums present


Update go install bd to {{version}}

Rebuild and install bd to ~/go/bin:

```bash
go install ./cmd/bd
~/go/bin/bd version  # Verify shows {{version}}
```

Note: If ~/go/bin is in PATH before /opt/homebrew/bin, this is the version that runs by default.


Run go install

go install ./cmd/bd


Add test coverage for external dep edge cases

During code review of bd-zmmy, identified missing test coverage:

1. RemoveDependency with external ref target (will fail - see bd-a3sj)
2. GetBlockedIssues with mix of local and external blockers
3. GetDependencyTree with external deps
4. AddDependency cycle detection with external refs (should be skipped?)
5. External dep resolution with WAL mode database
6. External dep resolution when target project has no .beads directory
7. External dep resolution with invalid external: format variations

Priority 2 because bd-a3sj is a real bug that tests would catch.


Improve test coverage for internal/beads (48.1% → 70%)

Improve test coverage for internal/beads package from 48% to 70%.

## Current State
- Coverage: 48.4%
- Files: beads.go, fingerprint.go
- Tests: beads_test.go (moderate coverage)

## Functions Needing Tests

### beads.go (database discovery)
- [ ] followRedirect - needs redirect file tests
- [ ] findDatabaseInBeadsDir - needs various dir structures
- [x] NewSQLiteStorage - likely covered
- [ ] FindDatabasePath - needs BEADS_DB env var tests
- [ ] hasBeadsProjectFiles - needs file existence tests
- [ ] FindBeadsDir - needs directory traversal tests
- [ ] FindJSONLPath - needs path derivation tests
- [ ] findGitRoot - needs git repo tests
- [ ] findDatabaseInTree - needs nested directory tests
- [ ] FindAllDatabases - needs multi-database tests
- [ ] FindWispDir - needs wisp directory tests
- [ ] FindWispDatabasePath - needs wisp path tests
- [ ] NewWispStorage - needs wisp storage tests
- [ ] EnsureWispGitignore - needs gitignore creation tests
- [ ] IsWispDatabase - needs path classification tests

### fingerprint.go (repo identification)
- [ ] ComputeRepoID - needs various remote URL tests
- [ ] canonicalizeGitURL - needs URL normalization tests
- [ ] GetCloneID - needs clone identification tests

## Implementation Guide

1. **Use temp directories:**
   ```go
   func TestFindBeadsDir(t *testing.T) {
       tmpDir := t.TempDir()
       beadsDir := filepath.Join(tmpDir, ".beads")
       os.MkdirAll(beadsDir, 0755)

       // Create test files
       os.WriteFile(filepath.Join(beadsDir, "beads.db"), []byte{}, 0644)

       // Change to tmpDir and test
       oldWd, _ := os.Getwd()
       os.Chdir(tmpDir)
       defer os.Chdir(oldWd)

       result := FindBeadsDir()
       assert.Equal(t, beadsDir, result)
   }
   ```

2. **Test scenarios:**
   - BEADS_DB environment variable set
   - .beads/ in current directory
   - .beads/ in parent directory
   - Redirect file pointing elsewhere
   - No beads directory found
   - Wisp directory alongside main beads

3. **Git remote URL tests:**
   ```go
   tests := []struct{
       input    string
       expected string
   }{
       {"git@github.com:user/repo.git", "github.com/user/repo"},
       {"https://github.com/user/repo", "github.com/user/repo"},
       {"ssh://git@github.com/user/repo.git", "github.com/user/repo"},
   }
   ```

## Success Criteria
- Coverage ≥ 70%
- All FindXxx functions have tests
- Environment variable handling tested
- Edge cases (missing dirs, redirects) covered

## Run Tests
```bash
go test -v -cover ./internal/beads
go test -race ./internal/beads
```


bd cook: needs field not converted to step dependencies

When cooking a formula with `needs` fields on steps, the dependencies are not created between sibling steps.

## Expected

Formula:
```yaml
steps:
  - id: inbox-check
    title: Check inbox
  - id: trigger-spawns
    title: Nudge polecats
    needs: [inbox-check]
```

Should create:
- mol-foo.inbox-check (no deps)
- mol-foo.trigger-spawns → depends on → mol-foo.inbox-check

## Actual

Both steps only depend on the parent proto:
- mol-foo.inbox-check → depends on → mol-foo
- mol-foo.trigger-spawns → depends on → mol-foo

The `needs` field is ignored.

## Impact

This breaks the step execution order. Steps that should wait for predecessors will run in parallel or out of order.

## Reproduction

```bash
bd cook mol-deacon-patrol.formula.yaml
bd show mol-deacon-patrol.trigger-pending-spawns
# Shows: Depends on mol-deacon-patrol (parent only)
# Should show: Depends on mol-deacon-patrol.inbox-check
```


Document BEADS_DIR pattern for multi-agent workspaces (Gas Town)

Gas Town and similar multi-agent systems need to configure separate beads databases per workspace/rig, distinct from any project-level beads.

## Use Case

In Gas Town:
- Each 'rig' (managed project) has multiple agents (polecats, refinery, witness)
- All agents in a rig should share a single beads database at the rig level
- This should be separate from any .beads/ the project itself uses
- The BEADS_DIR env var enables this

## Documentation Needed

1. Add a section to docs explaining BEADS_DIR for multi-agent setups
2. Example: setting BEADS_DIR in agent startup scripts/hooks
3. Clarify interaction with project-level .beads/ (BEADS_DIR takes precedence)

## Current Support

Already implemented in internal/beads/beads.go:FindDatabasePath():
- BEADS_DIR env var is checked first (preferred)
- BEADS_DB env var still supported (deprecated)
- Falls back to .beads/ search in tree

Just needs documentation for the multi-agent workspace pattern.


Test prefix bd-


Implement nix-hash staleness detection

## Summary
Detect when go.sum has changed but vendorHash in default.nix may be stale.

## Implementation Details

### Location
File: `cmd/bd/preflight.go`

### Detection Logic

**Tier 1 (Simple - implement this):**
Check if go.sum has uncommitted changes (staged or unstaged). If so, warn that vendorHash might need updating.

```go
func runNixHashCheck() CheckResult {
    // Check if go.sum has changes
    cmd := exec.Command("git", "diff", "--name-only", "HEAD", "--", "go.sum")
    output, _ := cmd.Output()

    // Also check staged changes
    stagedCmd := exec.Command("git", "diff", "--name-only", "--cached", "--", "go.sum")
    stagedOutput, _ := stagedCmd.Output()

    hasChanges := len(output) > 0 || len(stagedOutput) > 0

    if hasChanges {
        return CheckResult{
            Name:    "nix-hash",
            Passed:  false,
            Output:  "go.sum has changes - vendorHash in default.nix may need updating",
            Command: "git diff HEAD -- go.sum",
            Warning: true,  // Not a hard failure, just a warning
        }
    }

    return CheckResult{
        Name:    "nix-hash",
        Passed:  true,
        Output:  "go.sum unchanged",
        Command: "git diff HEAD -- go.sum",
    }
}
```

**Tier 2 (Future - auto-fix):**
If nix is available, compute the correct vendorHash:
```bash
nix-prefetch-url --unpack "https://..."
# or use nix build with --print-out-paths
```

### Key Files
- `go.sum` - Go module checksums
- `default.nix` - Contains vendorHash on line 12

### Output Format
```
$ bd preflight --check
✓ Nix hash current (go.sum unchanged)

# When go.sum changed:
⚠ Nix hash may be stale
  go.sum has uncommitted changes
  Hint: If you modified dependencies, run nix build to get new vendorHash

# When nix available (future):
✗ Nix hash stale
  Expected: sha256-KRR6dXzsSw8OmEHGBEVDBOoIgfoZ2p0541T9ayjGHlI=
  Current:  sha256-ovG0EWQFtifHF5leEQTFvTjGvc+yiAjpAaqaV0OklgE=
  Fix: bd preflight --fix
```

### Add Warning field to CheckResult
```go
type CheckResult struct {
    Name    string
    Passed  bool
    Output  string
    Command string
    Skipped bool
    Warning bool  // Yellow ⚠ instead of red ✗
}
```

### Testing
- Test with clean go.sum (no changes)
- Test with modified go.sum (stage a fake change, then reset)
- Test output format

### Acceptance Criteria
- [x] Detects when go.sum has uncommitted changes
- [x] Shows as warning (⚠) not error (✗)
- [x] Provides helpful hint about vendorHash
- [x] Works with --json flag
- [x] Does not require nix to be installed (just git)


Add composite index (issue_id, event_type) on events table

GetCloseReason and GetCloseReasonsForIssues filter by both issue_id and event_type.

**Query (queries.go:355-358):**
```sql
SELECT comment FROM events
WHERE issue_id = ? AND event_type = ?
ORDER BY created_at DESC LIMIT 1
```

**Problem:** Currently uses idx_events_issue but must filter event_type in memory.

**Solution:** Add migration:
```sql
CREATE INDEX IF NOT EXISTS idx_events_issue_type ON events(issue_id, event_type);
```

**Priority:** Low - events table is typically small relative to issues.


Fix wisp leak in nodb mode writeIssuesToJSONL

writeIssuesToJSONL in nodb.go calls writeJSONLAtomic without filtering wisps. This means any wisps created during a nodb session would be written to issues.jsonl, leaking ephemeral data into the git-tracked file.

Fix: Add the same wisp filter pattern used in sync_export.go, autoflush.go, and export.go:

```go
// Filter out wisps before writing
filtered := make([]*types.Issue, 0, len(issues))
for _, issue := range issues {
    if !issue.Wisp {
        filtered = append(filtered, issue)
    }
}
issues = filtered
```

Location: cmd/bd/nodb.go:writeIssuesToJSONL()


bd create -f crashes with nil pointer dereference

GitHub issue #674. The markdown import feature crashes at markdown.go:338 because global variables (store, ctx, actor) aren't initialized when createIssuesFromMarkdown is called. The function uses globals set by cobra command framework but is being called before they're ready. Need to either initialize globals at start of function or pass them as parameters.


Upgrade beads-mcp to {{version}}

Upgrade the MCP server via pip:

```bash
pip install --upgrade beads-mcp
pip show beads-mcp | grep Version  # Verify {{version}}
```

Note: Restart Claude Code or MCP session to use new version.


Wait for CI to pass


Merge: amber-1767146829144

branch: polecat/amber-1767146829144
target: main
source_issue: amber-1767146829144
rig: beads


Update version to {{version}} in version.go

Edit cmd/bd/version.go line 17:

```go
Version = "{{version}}"
```

Verify with: `grep 'Version =' cmd/bd/version.go`


Commit the release changes.

Commit the release changes.

```bash
git add -A
git commit -m "chore: bump version to v0.37.0"
```

instantiated_from: bd-mol-xga
step: commit-release


Create and push git tag v{{version}}

Create the release tag and push it:

```bash
git tag v{{version}}
git push origin v{{version}}
```

This triggers the GoReleaser GitHub Action to build release binaries.


Commit release

Stage and commit all version changes.

```bash
git add -A
git commit -m "chore: Bump version to 0.99.0-test"
```

Review the commit to ensure all expected files are included.


Enrich MutationEvent with title and assignee

Current MutationEvent only has IssueID, no context. Add Title and Assignee fields so activity feeds can display meaningful info without extra lookups. Emit these fields when creating mutation events in server_core.go.


Ephemeral issue cleanup and history compaction

## Problem

Beads history grows without bound. Every message, handoff, work assignment
stays in issues.jsonl forever. Enterprise users will balk at "git as database."

## Solution: Two-Tier Cleanup

### Tier 1: Ephemeral Cleanup (v1)

bd cleanup --ephemeral --closed

- Deletes closed issues where ephemeral=true from issues.jsonl
- Safe: only removes explicitly marked ephemeral + closed
- Preserves git history (commits still exist)
- Run after swarm completion

### Tier 2: History Compaction (v2)

bd compact --squash

- Rewrites issues.jsonl to remove tombstones
- Optionally squashes git history (interactive rebase equivalent)
- Preserves Merkle proofs for deleted items
- Advanced: cold storage tiering

## HOP Context

| Layer | HOP Role | Persistence |
|-------|----------|-------------|
| Execution trace | None | Ephemeral |
| Work scaffolding | None | Summarizable |
| Work outcome | CV entry | Permanent |
| Validation record | Stake proof | Permanent |

"Execution is ephemeral. Outcomes are permanent. You can't squash your CV."

## Success Criteria

- After cleanup --ephemeral: issues.jsonl only contains persistent work
- Work outcomes preserved (CV entries)
- Validation records preserved (stake proofs)
- Execution scaffolding removed (transient coordination)

## Implementation Plan (REVISED after code review)

See history/EPHEMERAL_MOLECULES_DESIGN.md for comprehensive design + review.

## Key Simplification

After code review, Tier 1 is MUCH simpler than originally designed:

- **Original**: Separate ephemeral repo with routing.ephemeral config
- **Revised**: Just set Wisp: true in cloneSubgraph()

The wisp field and bd cleanup --wisp already exist\!

## Child Tasks (in dependency order)

1. **bd-2vh3.2**: Tier 1 - Ephemeral spawning (SIMPLIFIED) [READY]
   - Just add Wisp: true to template.go:474
   - Add --persistent flag to opt out
2. **bd-2vh3.3**: Tier 2 - Basic bd mol squash command
3. **bd-2vh3.4**: Tier 3 - AI-powered squash summarization
4. **bd-2vh3.5**: Tier 4 - Auto-squash on molecule completion
5. **bd-2vh3.6**: Tier 5 - JSONL archive rotation (DEFERRED: post-1.0)

## What Already Exists

| Component | Location |
|-----------|----------|
| Ephemeral field | internal/types/types.go:45 |
| bd cleanup --wisp | cmd/bd/cleanup.go:72 |
| cloneSubgraph() | cmd/bd/template.go:456 |
| loadTemplateSubgraph() | cmd/bd/template.go |

## HOP Alignment

'Execution is ephemeral. Outcomes are permanent. You can't squash your CV.'


Add bd reset command for clean slate restart

Implement a command to reset beads to a clean starting state.

**Context:** GitHub issue #479 - users sometimes get beads into an invalid state after updates, and there's no clean way to start fresh. The git backup/restore mechanism that protects against accidental deletion also makes it hard to intentionally reset.

**Current workaround** (from maphew):
```bash
bd daemons killall
git rm .beads/*.jsonl
git commit -m 'remove old issues'
rm .beads/*
bd init
bd onboard
```

**Desired:** A proper `bd reset` command that handles this cleanly and safely.


Final release verification

Verify all release artifacts are accessible:

- [ ] `bd --version` shows 0.30.4
- [ ] `bd version --daemon` shows 0.30.4
- [ ] GitHub release exists: https://github.com/steveyegge/beads/releases/tag/v0.30.4
- [ ] `brew upgrade beads && bd --version` shows 0.30.4 (if using Homebrew)
- [ ] `pip show beads-mcp` shows 0.30.4
- [ ] npm package available at 0.30.4
- [ ] `bd info --whats-new` shows 0.30.4 notes

Run final checks:
```bash
bd --version
bd version --daemon
pip show beads-mcp | grep Version
bd info --whats-new
```


Verify PyPI package

Confirm PyPI package published.

```bash
pip index versions beads-mcp 2>/dev/null | head -3
```

Or check: https://pypi.org/project/beads-mcp/

Should show 0.41.0.


Add refs field for cross-references with relationship type

The refs field enables rich relationships beyond parent/child and depends-on.

Structure:
  refs: [{id: string, rel: string}]

Relationship types:
- until: active until target closes
- caused_by: triggered by target
- relates_to: general association
- supersedes: replaces target
- validates: approval relationship

Example:
  refs:
    - id: gt-abc1
      rel: until
    - id: hq-xyz9
      rel: caused_by

Enables:
- bd show gt-abc1 --refs (what references this?)
- Conditional state (muted UNTIL issue closes)
- Audit trails (this event CAUSED_BY that issue)


bd formula add: Import formula to local catalog

Import a formula file to the local catalog (search path).

**Replaces**: "bd mol promote" (proto-to-proto concept is obsolete with ephemeral protos)

## Usage
```bash
# Add a formula file to project catalog
bd formula add my-workflow.formula.json

# Add to user-level catalog
bd formula add my-workflow.formula.json --scope user

# Add from URL
bd formula add https://example.com/workflow.formula.json
```

## Implementation
1. Parse the formula file (validate JSON structure)
2. Determine target directory based on scope:
   - project: .beads/formulas/
   - user: ~/.beads/formulas/
   - town: ~/gt/.beads/formulas/
3. Copy/download formula to target
4. Verify it is loadable: bd formula show <name>

## Flags
- `--scope <level>` - Where to add (project|user|town, default: project)
- `--name <name>` - Override formula name (default: from file)

## Note
This is for manually adding formulas. For GitHub-hosted formulas, use:
  bd mol install github.com/org/formula-name


Test Molecule

A test molecule


Phase 2.5: TOON-based daemon sync

Implement TOON-native daemon sync (replaces JSONL sync machinery).

## Overview
Daemon sync is the final integration point. Replace export/import/merge machinery with TOON-native sync, building on deletion tracking (2.3) and merge optimization (2.4).

## Required Work

### 2.5.1 TOON-based Daemon Sync
- [ ] Understand current JSONL sync machinery (export.go, import.go, merge.go)
- [ ] Replace export step with TOON encoding (EncodeTOON)
- [ ] Replace import step with TOON decoding (DecodeTOON)
- [ ] Replace merge step with TOON-aware 3-way merge
- [ ] Update daemon auto-sync to read/write TOON
- [ ] Verify 5-second debounce still works

### 2.5.2 Deletion Sync Integration
- [ ] Load deletions.toon during import phase
- [ ] Apply deletions after merging issues
- [ ] Ensure deletion TTL respects daemon schedule

### 2.5.3 Testing
- [ ] Unit tests for daemon sync with TOON
- [ ] Integration tests with actual daemon operations
- [ ] Multi-clone sync scenarios with concurrent edits
- [ ] Performance comparison with JSONL sync
- [ ] Long-running daemon stability tests

## Success Criteria
- Daemon reads/writes TOON format (not JSONL)
- Sync latency comparable to JSONL (<100ms)
- All 70+ tests passing
- bdt commands work seamlessly with daemon
- Multi-clone sync scenarios work correctly


Revert/remove YAML workflow system

Revert the recent commit and remove all YAML workflow code:

1. `git revert aae8407a` (the commit we just pushed with workflow fixes)
2. Remove `cmd/bd/templates/workflows/` directory
3. Remove workflow.go or gut it to minimal stub
4. Remove WorkflowTemplate types from internal/types/workflow.go
5. Remove any workflow-related RPC handlers

Keep only minimal scaffolding if needed for the new template system.


Merge: quartz-1767082908528

branch: polecat/quartz-1767082908528
target: main
source_issue: quartz-1767082908528
rig: beads


Merge: bd-4qfb

branch: polecat/Polish
target: main
source_issue: bd-4qfb
rig: beads


bd mol squash handles wisp→digest

Update bd mol squash to handle ephemeral molecules.

## Behavior for Ephemeral Molecules
1. Delete wisp from .beads-ephemeral/
2. Create digest issue in .beads/ (permanent)
3. Digest has type:digest and squashed_from field

## Digest Format
```json
{
  "id": "<parent>.digest-NNN",
  "type": "digest",
  "title": "<proto> cycle @ <timestamp>",
  "description": "<summary from --summary flag>",
  "parent": "<proto-id>",
  "squashed_from": "<wisp-id>"
}
```

## Implementation
- Detect if molecule is ephemeral (check storage location or flag)
- Delete from ephemeral store
- Create digest in permanent store
- Return digest ID

## Testing
- Test squash of ephemeral mol creates digest
- Test wisp is deleted after squash
- Test digest is queryable


Merge: jade-mjtlsejo

branch: polecat/jade-mjtlsejo
target: main
source_issue: jade-mjtlsejo
rig: beads


Split monolithic sqlite.go into focused files

internal/storage/sqlite/sqlite.go is 1050 lines containing initialization, 20+ CRUD methods, query building, and schema management.

Split into:
- store.go: Store struct & initialization (150 lines)
- bead_queries.go: Bead CRUD (300 lines)
- work_queries.go: Work queries (200 lines)
- stats_queries.go: Statistics (150 lines)
- schema.go: Schema & migrations (150 lines)
- helpers.go: Common utilities (100 lines)

Impact: Impossible to understand at a glance; hard to find specific functionality; high cognitive load

Effort: 6-8 hours


Run tests and verify build

Run the test suite to verify nothing is broken:

```bash
./scripts/test.sh
```

Or manually:
```bash
go build ./cmd/bd/...
go test ./...
```

Fix any failures before proceeding.


Git merge driver uses invalid placeholders (%L, %R instead of %A, %B)

## Problem

The beads git merge driver is configured with invalid Git placeholders:

```
git config merge.beads.driver "bd merge %A %O %L %R"
```

Git doesn't recognize `%L` or `%R` as valid merge driver placeholders. The valid placeholders are:
- `%O` = base (common ancestor)
- `%A` = current version (ours)
- `%B` = other version (theirs)

## Impact

- Affects ALL users when they have `.beads/beads.jsonl` merge conflicts
- Automatic JSONL merge fails with error: "error reading left file: failed to open file: open 7: no such file or directory"
- Users must manually resolve conflicts instead of getting automatic merge

## Root Cause

The `bd init` command (or wherever the merge driver is configured) is using non-standard placeholders. When Git encounters `%L` and `%R`, it either passes them literally or interprets them incorrectly.

## Fix

Update the merge driver configuration to:
```
git config merge.beads.driver "bd merge %A %O %A %B"
```

Where:
- 1st `%A` = output file (current file, will be overwritten)
- `%O` = base (common ancestor)
- 2nd `%A` = left/current version
- `%B` = right/other version

## Action Items

1. Fix `bd init` (or equivalent setup command) to use correct placeholders
2. Add migration/warning for existing users with misconfigured merge driver
3. Update documentation with correct merge driver setup
4. Consider adding validation when `bd init` is run


GH#483: Pre-commit hook fails unnecessarily when .beads removed

Pre-commit hook fails on bd sync when .beads directory exists but user is on branch without beads. Should exit gracefully. See GitHub issue #483.


bd mol current: soft cursor showing current/next step

Add bd mol current command for molecule navigation orientation.

## Usage

bd mol current [mol-id]

If mol-id given, show status for that molecule.
If not given, infer from in_progress issues assigned to current agent.

## Output

You're working on molecule gt-abc (Feature X)

  [done] gt-abc.1: Design
  [done] gt-abc.2: Scaffold
  [done] gt-abc.3: Implement
  [current] gt-abc.4: Write tests [in_progress] <- YOU ARE HERE
  [pending] gt-abc.5: Documentation
  [pending] gt-abc.6: Exit decision

Progress: 3/6 steps complete

## Key behaviors
- Shows full molecule structure with status indicators
- Highlights current in_progress step
- If no in_progress, highlights first ready step
- Works without explicit cursor tracking (inferred from state)

## Implementation notes
- Query children of mol-id
- Sort by dependency order
- Find first in_progress or first ready
- Format with status indicators

## Gas Town integration
- gt-lz13: Update templates with nav workflow
- gt-um6q: Update docs with nav workflow


Rename 'bond' to 'spawn' for instantiation

Rename the bd mol bond command to bd mol spawn for instantiating protos.

- Rename molBondCmd to molSpawnCmd
- Update command Use/Short/Long descriptions
- Keep 'bond' available for the new bonding feature
- Update all documentation references
- Add 'protomolecule' as easter egg alias for 'proto'


Implement Jira issue timestamp comparison for sync

In cmd/bd/jira.go:633, there's a TODO for a full implementation that would fetch the Jira issue and compare timestamps to detect conflicts during sync.

File: cmd/bd/jira.go:633


Update CHANGELOG.md for {{version}}

In CHANGELOG.md:

1. Change `## [Unreleased]` section header to `## [{{version}}] - {{date}}`
2. Add new empty `## [Unreleased]` section above it
3. Review and clean up the changes list

Format:
```markdown
## [Unreleased]

## [{{version}}] - {{date}}

### Added
- ...

### Changed
- ...

### Fixed
- ...
```


Add tests for validation functions

Validation functions like ParseIssueType have 0% coverage. These are critical for ensuring data quality and preventing invalid data from entering the system.


bd show --short flag for compact output

## Request
Add a `--short` flag to `bd show` for compact, one-line output per issue.

## Use Case
When checking multiple issues quickly:
```bash
bd show bd-nkqx --short && bd show bd-oxgi --short
```

Currently fails with "unknown flag: --short"

## Expected Output
Something like:
```
bd-nkqx [closed] P1 task: Validate swarm schema design
bd-oxgi [closed] P1 task: Add mol_type schema field to beads
```

## Format Suggestion
`<id> [<status>] <priority> <type>: <title>`

Optional: include blocker count if any, e.g. `(blocked by 2)`


Support session_id field on issue close/update mutations

## Context

Per Gas Town decision 009-session-events-architecture.md, work attribution for
entity CV building requires capturing which Claude Code session performed work.

## Implementation

Add session_id support to issue mutations:

### Schema
Add optional field to issue close:
- closed_by_session: string (Claude Code session UUID)

### CLI
```bash
bd close gt-abc --session "abc123-session-id"
# Or via env var:
CLAUDE_SESSION_ID=abc123 bd close gt-abc
```

### Storage
Store in issues.jsonl:
```json
{"id": "gt-abc", "status": "closed", "closed_by_session": "abc123", ...}
```

## Acceptance Criteria

- [ ] bd close accepts --session flag or reads CLAUDE_SESSION_ID env
- [ ] session_id stored in issue close record
- [ ] bd show displays closed_by_session if present
- [ ] Works for bd update --status=closed as well

## Future

- Query by session: bd list --closed-by-session=X
- Entity chain: aggregate session activity for CV

## Related

- Gas Town docs/hop/decisions/009-session-events-architecture.md
- gt-nvz8b: gt done captures session_id


Code smell: Inconsistent error handling patterns

Commands use a mix of error handling patterns:
- FatalError()
- FatalErrorRespectJSON()
- fmt.Fprintf(os.Stderr, ...) + os.Exit(1)
- Silent continue
- Inconsistent resource cleanup (result.Close())

**Example in show.go lines 89-146:**
Different error paths use different patterns, some close resources, some don't.

**Acceptance Criteria:**
- [ ] Document error handling contract
- [ ] Standardize on consistent pattern
- [ ] Use defer for resource cleanup
- [ ] Create helper for common fetch-and-handle pattern
- [ ] Tests pass


Add empty tasks validation in workflow create

workflow.go:321 will panic if wf.Tasks is empty. Add validation that len(wf.Tasks) > 0 before accessing wf.Tasks[0].


Graph Link: supersedes for version chains

Implement supersedes link type for version tracking.

New command:
- bd supersede <id> --with <new> - marks id as superseded by new
- Auto-closes the superseded issue

Query support:
- bd show <id> shows 'Superseded by: <new>'
- bd show <new> shows 'Supersedes: <id>'
- bd list --superseded shows version chains

Storage:
- superseded_by column pointing to replacement issue

Useful for design docs, specs, and evolving artifacts.


Update CHANGELOG header

Change [Unreleased] to [{{version}}] - {{date}} and add new empty [Unreleased] section above it.


test pin issue


Implement await type handlers (gh:run, gh:pr, timer, human, mail)

Implement condition checking for each await type.

## Handlers Needed
- gh:run:<id> - Check GitHub Actions run status via gh CLI
- gh:pr:<id> - Check PR merged/closed status via gh CLI
- timer:<duration> - Simple elapsed time check
- human:<prompt> - Check for human approval (via mail?)
- mail:<pattern> - Check for mail matching pattern

## Implementation Location
This is Deacon logic, so likely in Gas Town (gt) not beads.

## Interface
```go
type AwaitHandler interface {
    Check(awaitID string) (completed bool, result string, err error)
}
```


Merge3Way public API does not expose TTL parameter

The public Merge3Way() function in merge.go does not allow callers to configure the tombstone TTL. It hard-codes the default via merge3WayWithTTL(). While merge3WayWithTTL() exists, it is unexported (lowercase). This means the CLI and tests cannot configure TTL at merge time. Use cases: testing with different TTL values, per-repository TTL configuration, debugging with short TTL, supporting --ttl flag in bd merge command (mentioned in design doc bd-zvg). Recommendation: Export Merge3WayWithTTL (rename to uppercase). Files: internal/merge/merge.go:77, 292-298


Work on beads-399: Add omitempty to JSONL fields for smal...

Work on beads-399: Add omitempty to JSONL fields for smaller notifications. When done, submit MR (not PR) to integration branch for Refinery.


Update local installation

go build -o ~/.local/bin/bd ./cmd/bd && codesign -s - ~/.local/bin/bd


Dead code: fetchAndRebaseInWorktree() marked DEPRECATED but still exists

attached_args: Remove dead code fetchAndRebaseInWorktree

The function fetchAndRebaseInWorktree() in internal/syncbranch/worktree.go (lines 811-830) is marked as DEPRECATED with a comment:

```go
// fetchAndRebaseInWorktree is DEPRECATED - kept for reference only.
// Use contentMergeRecovery instead to avoid tombstone resurrection.
```

Since contentMergeRecovery() is the replacement and is being used, this dead code should be removed to reduce maintenance burden.

Location: internal/syncbranch/worktree.go:811-830


Fix JSON error output consistency across all commands

## Problem

When `--json` flag is specified, error output should return JSON format, not plain text. Currently only `bd show` uses `FatalErrorRespectJSON` - all other commands use direct `fmt.Fprintf(os.Stderr, ...)`.

## Audit Findings (bd-au0.7)

| File | stderr writes | Commands affected |
|------|---------------|-------------------|
| show.go | 51 | update, close, edit |
| dep.go | 41 | dep add/remove/tree/cycles |
| label.go | 19 | label add/remove/list |
| comments.go | ~10 | comments add/list |
| epic.go | ~5 | epic status/close-eligible |

## Solution

Replace `fmt.Fprintf(os.Stderr, ...) + os.Exit(1)` patterns with `FatalErrorRespectJSON()` in all commands that support `--json` flag.

## Pattern

```go
// Before (inconsistent)
fmt.Fprintf(os.Stderr, "Error: %v\n", err)
os.Exit(1)

// After (respects --json)
FatalErrorRespectJSON("%v", err)
```

## Success Criteria

- All commands return JSON errors when `--json` flag is set
- Error format: `{"error": "message"}`
- Exit code 1 preserved for errors


Update .claude-plugin/plugin.json to 0.30.4

Update version field in .claude-plugin/plugin.json:
```json
"version": "0.30.4"
```

```verify
jq -e '.version == "0.30.4"' .claude-plugin/plugin.json
```


Review PR #513: fix hooks install docs

Review and merge PR #513 from aspiers. This PR fixes incorrect docs for how to install git hooks - updates README to use bd hooks install instead of removed install.sh. Simple 1-line change. URL: https://github.com/anthropics/beads/pull/513


Add bd state and bd set-state helper commands

Convenience commands for the labels-as-state pattern documented in LABELS.md.

`bd state <role> <dimension>` - Query the current value of a state dimension
Example: bd state witness-alpha patrol → outputs: active

`bd set-state <role> <dimension>=<value> [--reason "..."]` - Atomically creates an event bead and updates the label
Example: bd set-state witness-alpha patrol=muted --reason "Investigating stuck polecat"

This would combine the manual steps:
1. bd create "<reason>" -t event --parent <role>
2. bd label remove <role> <dimension>:<old-value>
3. bd label add <role> <dimension>:<new-value>

Into a single atomic operation.

Discovered from: bd-31ae


bd wisp create doesn't set Wisp flag on spawned issues

When running 'bd wisp create <proto>', the spawned issues don't have Wisp: true set. They show up in 'bd ready' and get synced to JSONL.

Example: gt-lqc6m and gt-wisp-ry9 are mol-deacon-patrol issues that should be wisps but have wisp: null.

This causes patrol cycles to pollute the issue database and show up as ready work.


Test role bead


Merge: amber-1767138546434

branch: polecat/amber-1767138546434
target: main
source_issue: amber-1767138546434
rig: beads


Merge: bd-401h

branch: polecat/rictus
target: main
source_issue: bd-401h
rig: beads


Remove all deletions.jsonl code except migration

There's deletions manifest code spread across the entire codebase that should have been removed after tombstone migration:

Files with deletions code (non-migration):
- internal/deletions/ - entire package
- cmd/bd/sync.go - 25+ references, auto-compact, sanitize
- cmd/bd/delete.go - dual-writes to deletions.jsonl
- internal/importer/importer.go - checks deletions manifest
- internal/syncbranch/worktree.go - merges deletions.jsonl
- cmd/bd/doctor/fix/sync.go - cleanupDeletionsManifest
- cmd/bd/doctor/fix/deletions.go - HydrateDeletionsManifest
- cmd/bd/integrity.go - checks deletions for data loss
- cmd/bd/deleted.go - entire command
- cmd/bd/compact.go - pruneDeletionsManifest
- cmd/bd/doctor.go - checkDeletionsManifest
- Plus many more

Action: Aggressively remove all non-migration deletions code. Tombstones are the only deletion mechanism now.


Update git hooks

Install the updated hooks:
```bash
bd hooks install
```

Verify hook version:
```bash
grep 'bd-hooks-version' .git/hooks/pre-commit
```

```verify
grep -q 'bd-hooks-version: 0.30.4' .git/hooks/pre-commit 2>/dev/null || echo 'Hooks may not be installed - verify manually'
```


Improve test coverage

The test suite reports less than 45% code coverage. Identify the specific uncovered areas of the codebase, including modules, functions, or features. Rank them by potential impact on system reliability and business value, from most to least, and provide actionable recommendations for improving coverage in each area.


Gate await fields cleared by auto-flush/auto-import cycle

## Problem

When creating a gate with `--await` fields (e.g., `gh:run:123`), the await_type and await_id are initially stored correctly in the SQLite database. However, they get cleared (set to empty strings) during subsequent bd commands due to the auto-flush/auto-import cycle.

## Reproduction Steps

1. Create a gate with await:
   ```
   bd gate create --molecule test-mol --await gh:run:20517738002
   ```
   Output shows correct `await_type: gh:run, await_id: 20517738002`

2. Check database - fields are present

3. Run any bd command (e.g., `bd list`)

4. Check database again - await_type and await_id are now empty

## Root Cause

Gates are wisps (ephemeral issues). During the auto-flush cycle:
1. Auto-flush exports issues to JSONL (filtering out wisps)
2. Auto-import reads JSONL and updates DB rows
3. The update clears fields that weren't in the JSONL (including await fields)

## Workaround

Using `--no-auto-import --no-auto-flush` flags preserves the fields, but this isn't practical for normal use.

## Impact

GitHub gate evaluation (`bd gate eval`) cannot work because by the time eval runs, the await fields have been cleared.

## Suggested Fix

Either:
1. Don't clear await fields during auto-import if they weren't in the source
2. Store wisp fields separately from the main JSONL export
3. Include wisps in export but filter them at sync time


Consolidate git context into single cached struct

Code review finding from bd-7di fix.

Currently there are 3 separate caches:
- isWorktreeOnce/isWorktreeResult
- mainRepoRootOnce/mainRepoRootResult/mainRepoRootErr
- repoRootOnce/repoRootResult

These have redundant git calls - e.g. both isWorktreeUncached() and getMainRepoRootUncached() call getGitDirNoError("--git-common-dir").

Could consolidate into a single cached struct:
```go
type gitContext struct {
    gitDir     string
    commonDir  string
    repoRoot   string
    isWorktree bool
}
```

This would reduce git calls further and simplify ResetCaches().

File: internal/git/gitdir.go


Clean up orphaned child issues (bd-cb64c226.*, bd-cbed9619.*)

## Problem

Every bd command shows warnings about 12 orphaned child issues:
- bd-cb64c226.1, .6, .8, .9, .10, .12, .13
- bd-cbed9619.1, .2, .3, .4, .5

These are hierarchical IDs (parent.child format) where the parent issues no longer exist.

## Impact

- Clutters output of every bd command
- Confusing for users
- Indicates incomplete cleanup of deleted parent issues

## Proposed Solution

1. Delete the orphaned issues since their parents no longer exist:
   ```bash
   bd delete bd-cb64c226.1 bd-cb64c226.6 bd-cb64c226.8 ...
   ```

2. Or convert them to top-level issues if they contain useful content

## Investigation Needed

- What were the parent issues bd-cb64c226 and bd-cbed9619?
- Why were they deleted without their children?
- Should bd delete cascade to children automatically?


Merge: bd-4opy

branch: polecat/angharad
target: main
source_issue: bd-4opy
rig: beads


Issue lifecycle hooks (on-close, on-complete)

Add hooks that fire on issue state transitions, enabling automation like closing linked GitHub issues.

## Problem

We have `external_ref` to link beads issues to external systems (GitHub, Linear, Jira), but no mechanism to trigger actions when issues close. Currently:

```
bd-u2sc (external_ref: gh-692) closes → nothing happens
```

## Proposed Solution

### Phase 1: Shell Hooks

Add `.beads-hooks/on-close.sh` (and similar lifecycle hooks):

```bash
# .beads-hooks/on-close.sh
# Called by bd close with issue JSON on stdin
#\!/bin/bash
issue=$(cat)
external_ref=$(echo "$issue" | jq -r '.external_ref // empty')
if [[ "$external_ref" == gh-* ]]; then
    number="${external_ref#gh-}"
    gh issue close "$number" --repo steveyegge/beads \
      --comment "Completed via beads epic $(echo $issue | jq -r .id)"
fi
```

### Lifecycle Events

| Event | Trigger | Use Cases |
|-------|---------|-----------|
| `on-close` | Issue closed | Close external refs, notify, archive |
| `on-complete` | Epic children all done | Roll-up completion, close parent refs |
| `on-status-change` | Any status transition | Sync to external systems |

### Phase 2: Molecule Completion Handlers

Molecules could define completion actions:

```yaml
name: github-issue-tracker
on_complete:
  - action: shell
    command: gh issue close {{external_ref}} --repo {{repo}}
  - action: mail
    to: mayor/
    subject: "Epic {{id}} completed"
```

### Phase 3: Gas Town Integration

For full Gas Town deployments:
- Witness observes closures via beads events
- Routes to integration agents via mail
- Agents handle external system interactions

## Implementation Notes

- Hooks should be async (don't block bd close)
- Pass full issue JSON to hook via stdin
- Support hook timeout and failure handling
- Consider `--no-hooks` flag for bulk operations

## Related

- `external_ref` field already exists (GH#142)
- Cross-project deps: bd-h807, bd-d9mu
- Git hooks: .beads-hooks/ pattern established

## Use Cases

1. **GitHub integration**: Close GH issues when beads epic completes
2. **Linear sync**: Update Linear status when beads status changes
3. **Notifications**: Send mail/Slack when high-priority issues close
4. **Audit**: Log all closures to external system


Formula parser: YAML schema for .formula.yaml files

Implement formula parsing from YAML:
- Define YAML schema for .formula.yaml files
- Parse steps, compose rules, vars
- Support extends for formula inheritance
- Validate formula structure

Schema should support:
- formula: name
- description: text
- version: number
- type: workflow|expansion|aspect
- vars: variable definitions
- steps: step definitions
- compose: composition rules

Gas Town tracking: gt-8tmz.12


Add pinned field to issue schema

Add boolean 'pinned' field to the issue schema. When true, the issue is marked as a persistent context marker that should not be treated as a work item.


Implement `bd setup cursor` for Cursor IDE integration

Create a `bd setup cursor` command that integrates Beads workflow into Cursor IDE via .cursorrules file. Unlike Claude Code (which has hooks), Cursor uses a static rules file to provide context to its AI.


Merge: obsidian-1767138468820

branch: polecat/obsidian-1767138468820
target: main
source_issue: obsidian-1767138468820
rig: beads


test hook pin


Commit release

Stage and commit all version changes.

```bash
git add -A
git commit -m "chore: Bump version to 0.39.0"
```

Review the commit to ensure all expected files are included.


Update .claude-plugin/marketplace.json to 0.30.4

Update version field in .claude-plugin/marketplace.json:
```json
"version": "0.30.4"
```

```verify
jq -e '.plugins[0].version == "0.30.4"' .claude-plugin/marketplace.json
```


Add git operations for --hard reset

Implement git integration for hard reset mode.

## Operations Needed
1. `git rm -rf .beads/*.jsonl` - remove data files from index
2. `git commit -m 'beads: reset to clean state'` - commit removal
3. After re-init: `git add .beads/` and commit fresh state

## Edge Cases to Handle
- Uncommitted changes in .beads/ - warn or error
- Detached HEAD state - warn, maybe block
- Git not initialized - skip git ops, warn
- Git operations fail mid-way - clear error messaging

## Interface
```go
type GitState struct {
    IsRepo       bool
    IsDirty      bool   // uncommitted changes in .beads/
    IsDetached   bool   // detached HEAD
    Branch       string // current branch name
}

func CheckGitState(beadsDir string) (*GitState, error)
func GitRemoveBeads(beadsDir string) error
func GitCommitReset(message string) error
func GitAddAndCommit(beadsDir, message string) error
```

## Location
`internal/reset/git.go` - keep with reset package for now

Note: Codebase has no central git package. internal/compact/git.go is compact-specific.
Future refactoring could extract shared git utilities, but YAGNI for now.


test pin


Stale daemon.lock files cause 5+ second delays

## Problem
When a bd daemon crashes or is killed without cleanup, it leaves a stale daemon.lock file. Subsequent bd commands try to connect to the dead daemon, causing 5+ second timeouts before falling back to direct mode.

Found during gt status optimization (gt-zdtpw) - one stale wyvern daemon was causing 10+ second delays.

## Evidence
```
# Lock files with stale PIDs:
$ find ~/gt -name "daemon.lock" -exec cat {} \;
{"pid": 11045, ...}  # Not running (from Dec 27)
{"pid": 15986, ...}  # Not running (from Dec 27)
{"pid": 98055, ...}  # Just restarted

# But running daemons have different PIDs:
$ ps aux | grep "bd.*daemon"
11847, 11683, 11624  # None match the lock files!
```

## Proposed fixes

### 1. Validate lock on startup (quick fix)
Before trusting daemon.lock, check if the PID is still running:
```python
def is_daemon_alive(lock_path):
    lock = json.load(open(lock_path))
    try:
        os.kill(lock["pid"], 0)  # Signal 0 = check if alive
        return True
    except OSError:
        return False
```

### 2. Heartbeat mechanism (robust fix)
Daemon writes periodic heartbeat to lock file or separate file.
Clients check heartbeat age before attempting IPC.

### 3. Lock cleanup in daemon startup
When starting a new daemon, always check for and clean stale locks.

### 4. Graceful shutdown handling
Register signal handlers (SIGTERM, SIGINT) to clean up lock on exit.

## Workaround
For now, gastown uses `--no-daemon` for all read operations to avoid this issue.


Fix TestImportBugIntegration deadlock in importer_test.go

Code health review found internal/importer/importer_test.go has TestImportBugIntegration skipped with:

TODO: Test hangs due to database deadlock - needs investigation

This indicates a potential unresolved concurrency issue in the importer. The test has been skipped for an unknown duration.

Fix: Investigate the deadlock, fix the underlying issue, and re-enable the test.


Phase 1.2 follow-up: Clarify format storage

Phase 1.2 created the bdt executable structure but issues.toon is currently stored in JSONL format, not TOON format.

This is intentional for now:
- Phase 1.2 (bd-jv4w): Just infrastructure - separate binary, separate directory
- Phase 1.3 (bd-j0tr): Implement actual TOON encoding/writing

For now, keep as-is: filename '.toon' signals intent, content is JSONL (interim format). Phase 1.3 will switch to actual TOON.


Merge: bd-w193

branch: polecat/nux
target: main
source_issue: bd-w193
rig: beads


Add --body-file flag to bd create for reading descriptions from files

## Problem

Creating issues with long/complex descriptions via CLI requires shell escaping gymnastics:

```bash
# Current workaround - awkward heredoc quoting
bd create --title="..." --description="$(cat <<'EOF'
...markdown...
EOF
)"

# Often fails with quote escaping errors in eval context
# Agents resort to writing temp files then reading them
```

## Proposed Solution

Add `--body-file` and `--description-file` flags to read description from a file, matching `gh` CLI pattern.

```bash
# Natural pattern that aligns with training data
cat > /tmp/desc.md << 'EOF'
...markdown content...
EOF

bd create --title="..." --body-file=/tmp/desc.md
```

## Implementation

### 1. Add new flags to `bd create`

```go
createCmd.Flags().String("body-file", "", "Read description from file (use - for stdin)")
createCmd.Flags().String("description-file", "", "Alias for --body-file")
```

### 2. Flag precedence

- If `--body-file` or `--description-file` is provided, read from file
- If value is `-`, read from stdin
- Otherwise fall back to `--body` or `--description` flag
- If neither provided, description is empty (current behavior)

### 3. Error handling

- File doesn't exist → clear error message
- File not readable → clear error message
- stdin specified but not available → clear error message

## Benefits

✅ **Matches training data**: `gh issue create --body-file file.txt` is a common pattern
✅ **No shell escaping issues**: File content is read directly
✅ **Works with any content**: Markdown, special characters, quotes, etc.
✅ **Agent-friendly**: Agents already write complex content to temp files
✅ **User-friendly**: Easier for humans too when pasting long descriptions

## Related Commands

Consider adding similar support to:
- `bd update --body-file` (for updating descriptions)
- `bd comment --body-file` (if/when we add comments)

## Examples

```bash
# From file
bd create --title="Add new feature" --body-file=feature.md

# From stdin
echo "Quick description" | bd create --title="Bug fix" --body-file=-

# With other flags
bd create \
  --title="Security issue" \
  --type=bug \
  --priority=0 \
  --body-file=security-report.md \
  --label=security
```

## Testing

- Test with normal files
- Test with stdin (`-`)
- Test with non-existent files (error handling)
- Test with binary files (should handle gracefully)
- Test with empty files (valid - empty description)
- Test that `--description-file` and `--body-file` are equivalent aliases


Refinery Patrol

Merge queue processor patrol loop with verification gates.


wish: list & ready show issues as hierarchy tree

`bd ready` and `bd list` just show a flat list, and it's up to the reader to parse which ones are dependent or sub-issues of others. It would be much easier to understand if they were shown in a tree format


bd mol run: Only creates partial children from proto

When running `bd mol run gt-lwuu --var issue=gt-xxx`, only 2 of 4 proto children are created.

## Expected
Proto gt-lwuu has 4 children:
- gt-lwuu.1: load-context
- gt-lwuu.2: implement
- gt-lwuu.3: self-review
- gt-lwuu.8: request-shutdown

All 4 should be instantiated.

## Actual
Only 2 children created:
- load-context
- implement

self-review and request-shutdown are missing.

## Repro
```bash
bd --no-daemon mol run gt-lwuu --var issue=gt-xxx --json
bd list --parent=<created-id>  # Only shows 2 children
```

## Impact
Polecats spawned with mol-polecat-work get incomplete workflow.


Add integration tests for RPC server and event loops

After adding basic unit tests for daemon utilities, the complex daemon functions still need integration tests:

Core daemon lifecycle:
- startRPCServer: Initializes and starts RPC server with proper error handling
- runEventLoop: Polling-based sync loop with parent monitoring and signal handling
- runDaemonLoop: Main daemon initialization and setup

Health checking:
- isDaemonHealthy: Checks daemon responsiveness and health metrics
- checkDaemonHealth: Periodic health verification

These require more complex test infrastructure (mock RPC, test contexts, signal handling) and should be tackled after the unit test foundation is in place.


bump-version.sh should detect pre-staged release notes

When running the release workflow, I staged CHANGELOG.md and info.go changes before running bump-version.sh. The script:

1. Warned about uncommitted changes (correct)
2. Required stash/pop to proceed
3. After pop, the [Unreleased] header wasn't converted to version/date

The script could be smarter:
- Detect if staged changes are to CHANGELOG.md/info.go (expected for releases)
- Or provide a --allow-staged flag
- Or at minimum, re-apply the [Unreleased] → [X.Y.Z] transformation after detecting manual edits

Workaround: manually edit [Unreleased] to [0.39.1] - 2025-12-27 after stash pop.