Update local installation


GH#517: Claude sets priority wrong on new install

Claude uses 'medium/high/low' for priority instead of P0-P4. Update bd prime/onboard output to be clearer about priority syntax. See GitHub issue #517.


Remove dead test code in info_test.go

Code health review found cmd/bd/info_test.go has two tests permanently skipped:

- TestInfoCommand
- TestInfoCommandNoDaemon

Both skip with: 'Manual test - bd info command is working, see manual testing'

These are essentially dead code. Either automate them or remove them entirely.


Improve CheckStaleness error handling

## Problem

CheckStaleness returns 'false' (not stale) for multiple error conditions instead of returning errors. This masks problems.

**Location:** internal/autoimport/autoimport.go:253-285

## Edge Cases That Return False

1. **Invalid last_import_time format** (line 259-262)
2. **No JSONL file found** (line 267-277)
3. **JSONL stat fails** (line 279-282)

## Fix

Return errors for abnormal conditions:

```go
lastImportTime, err := time.Parse(time.RFC3339, lastImportStr)
if err != nil {
    return false, fmt.Errorf("corrupted last_import_time: %w", err)
}

if jsonlPath == "" {
    return false, fmt.Errorf("no JSONL file found")
}

stat, err := os.Stat(jsonlPath)
if err != nil {
    return false, fmt.Errorf("cannot stat JSONL: %w", err)
}
```

## Impact
Medium - edge cases are rare but should be handled

## Effort
30 minutes - requires updating callers in RPC server


bd cleanup --hard should skip tombstone creation for true permanent deletion

## Problem

When using bd cleanup --hard --older-than N --force, the command:
1. Deletes closed issues older than N days (converting them to tombstones with NOW timestamp)
2. Then tries to prune tombstones older than N days (finds none because they were just created)

This leaves the database bloated with fresh tombstones that will not be pruned.

## Expected Behavior

In --hard mode, the deletion should be permanent without creating tombstones, since the user explicitly requested bypassing sync safety.

## Workaround

Manually delete from database: sqlite3 .beads/beads.db 'DELETE FROM issues WHERE status=tombstone'

## Fix Options

1. In --hard mode, use a different delete path that does not create tombstones
2. After deleting, immediately prune the just-created tombstones regardless of age
3. Pass a skip_tombstone flag to the delete operation

Option 1 is cleanest - --hard should mean permanent delete without tombstone.


activity.go: Missing test coverage

The new activity.go command (from bd-xo1o.3) has no test coverage. At minimum, tests should cover:
- parseDurationString() for various formats (5m, 1h, 2d, invalid)
- filterEvents() for --mol and --type filtering
- formatEvent() and getEventDisplay() for all mutation types

Discovered during code review of bd-xo1o implementation.


Add date and priority filters to bd search for parity with bd list.

## Current State
bd search supports: --status, --type, --assignee, --label, --limit
bd list supports: all of the above PLUS date ranges and priority filters

## Filters to Add

### Priority Filters
```bash
bd search "query" --priority 1           # Exact priority
bd search "query" --priority-min 0       # P0 and above (higher priority)
bd search "query" --priority-max 2       # P2 and below (lower priority)
```

### Date Filters
```bash
bd search "query" --created-after 2025-01-01
bd search "query" --created-before 2025-12-31
bd search "query" --updated-after 2025-01-01
bd search "query" --closed-after 2025-01-01
```

### Content Filters
```bash
bd search "query" --desc-contains "bug"
bd search "query" --notes-contains "todo"
bd search "query" --empty-description    # Issues with no description
bd search "query" --no-assignee          # Unassigned issues
bd search "query" --no-labels            # Issues without labels
```

## Files to Modify

### 1. cmd/bd/search.go
Add flag definitions in init():
```go
searchCmd.Flags().IntP("priority", "p", -1, "Filter by exact priority (0-4)")
searchCmd.Flags().Int("priority-min", -1, "Filter by minimum priority")
searchCmd.Flags().Int("priority-max", -1, "Filter by maximum priority")
searchCmd.Flags().String("created-after", "", "Filter by creation date (YYYY-MM-DD)")
searchCmd.Flags().String("created-before", "", "Filter by creation date")
searchCmd.Flags().String("updated-after", "", "Filter by update date")
searchCmd.Flags().String("updated-before", "", "Filter by update date")
searchCmd.Flags().String("closed-after", "", "Filter by close date")
searchCmd.Flags().String("closed-before", "", "Filter by close date")
searchCmd.Flags().String("desc-contains", "", "Filter by description content")
searchCmd.Flags().String("notes-contains", "", "Filter by notes content")
searchCmd.Flags().Bool("empty-description", false, "Filter issues with empty description")
searchCmd.Flags().Bool("no-assignee", false, "Filter unassigned issues")
searchCmd.Flags().Bool("no-labels", false, "Filter issues without labels")
```

### 2. internal/rpc/protocol.go
Update SearchArgs struct:
```go
type SearchArgs struct {
    Query             string
    Filter            types.IssueFilter
    // Already has most fields via IssueFilter
}
```

Note: types.IssueFilter already has these fields - just need to wire them up!

### 3. cmd/bd/search.go Run function
Parse flags and populate filter:
```go
if priority, _ := cmd.Flags().GetInt("priority"); priority >= 0 {
    filter.Priority = &priority
}
if createdAfter, _ := cmd.Flags().GetString("created-after"); createdAfter != "" {
    t, err := time.Parse("2006-01-02", createdAfter)
    if err != nil {
        FatalError("invalid date format for --created-after: %v", err)
    }
    filter.CreatedAfter = &t
}
// ... similar for other flags
```

## Implementation Steps

1. **Check types.IssueFilter** - verify all needed fields exist
2. **Add flags to search.go** init()
3. **Parse flags** in Run function
4. **Pass to SearchIssues** via filter
5. **Test all combinations**

## Testing
```bash
# Create test issues
bd create "Test P1" -p 1
bd create "Test P2" -p 2 --description "Has description"

# Test filters
bd search "" --priority 1
bd search "" --priority-min 0 --priority-max 1
bd search "" --empty-description
bd search "" --desc-contains "description"
```

## Success Criteria
- All filters work in both direct and daemon mode
- Date parsing handles YYYY-MM-DD format
- --json output includes filtered results
- Help text documents all new flags


Edge Schema Consolidation: Unify all edges in dependencies table

Consolidate all edge types into the dependency table per decision 004.

## Changes
- Add metadata column to dependencies table
- Add thread_id column for conversation grouping
- Remove redundant Issue fields: replies_to, relates_to, duplicate_of, superseded_by
- Update all code to use dependencies API
- Migration script for existing data
- JSONL format change (breaking)

Reference: ~/gt/hop/decisions/004-edge-schema-consolidation.md


Merge: bd-9usz

branch: polecat/slit
target: main
source_issue: bd-9usz
rig: beads


Split internal/storage/sqlite/queries.go (1586 lines)

Split internal/storage/sqlite/queries.go (1704 lines) into logical modules.

## Current State
queries.go is 1704 lines with mixed responsibilities:
- Issue CRUD operations
- Search/filter operations
- Delete operations (complex cascade logic)
- Helper functions (parsing, formatting)

## Proposed Split

### 1. queries.go (keep ~400 lines) - Core CRUD
```go
// Core issue operations
func (s *SQLiteStorage) CreateIssue(...)
func (s *SQLiteStorage) GetIssue(...)
func (s *SQLiteStorage) UpdateIssue(...)
func (s *SQLiteStorage) CloseIssue(...)
```

### 2. queries_search.go (~300 lines) - Search/Filter
```go
// Search and filtering
func (s *SQLiteStorage) SearchIssues(...)
func (s *SQLiteStorage) GetIssueByExternalRef(...)
func (s *SQLiteStorage) GetCloseReason(...)
func (s *SQLiteStorage) GetCloseReasonsForIssues(...)
```

### 3. queries_delete.go (~400 lines) - Delete Operations
```go
// Delete operations with cascade logic
func (s *SQLiteStorage) CreateTombstone(...)
func (s *SQLiteStorage) DeleteIssue(...)
func (s *SQLiteStorage) DeleteIssues(...)
func (s *SQLiteStorage) resolveDeleteSet(...)
func (s *SQLiteStorage) expandWithDependents(...)
func (s *SQLiteStorage) validateNoDependents(...)
func (s *SQLiteStorage) checkSingleIssueValidation(...)
func (s *SQLiteStorage) trackOrphanedIssues(...)
func (s *SQLiteStorage) collectOrphansForID(...)
func (s *SQLiteStorage) populateDeleteStats(...)
func (s *SQLiteStorage) executeDelete(...)
func (s *SQLiteStorage) findAllDependentsRecursive(...)
```

### 4. queries_helpers.go (~100 lines) - Utilities
```go
// Helper functions (already at top of file)
func parseNullableTimeString(...)
func parseJSONStringArray(...)
func formatJSONStringArray(...)
```

### 5. queries_rename.go (~100 lines) - ID/Prefix Operations
```go
// ID and prefix management
func (s *SQLiteStorage) UpdateIssueID(...)
func (s *SQLiteStorage) RenameDependencyPrefix(...)
func (s *SQLiteStorage) RenameCounterPrefix(...)
func (s *SQLiteStorage) ResetCounter(...)
```

## Implementation Steps

1. **Create new files** with package declaration:
   ```go
   // queries_delete.go
   package sqlite

   import (...)
   ```

2. **Move functions** - cut/paste, maintaining order within each file

3. **Update imports** - each file needs its own imports

4. **Run tests** after each file split:
   ```bash
   go test ./internal/storage/sqlite/...
   ```

5. **Run linter** to catch any issues:
   ```bash
   golangci-lint run ./internal/storage/sqlite/...
   ```

## File Organization
```
internal/storage/sqlite/
├── queries.go          # Core CRUD (~400 lines)
├── queries_search.go   # Search/filter (~300 lines)
├── queries_delete.go   # Delete cascade (~400 lines)
├── queries_helpers.go  # Utilities (~100 lines)
└── queries_rename.go   # ID operations (~100 lines)
```

## Success Criteria
- No file > 500 lines
- All tests pass
- No functionality changes
- Clear separation of concerns


Create and push git tag v0.33.2

Create the release tag and push it:

```bash
git tag v0.33.2
git push origin v0.33.2
```

This triggers the GoReleaser GitHub Action to build release binaries.


Work on beads-eub: Consolidated context tool for MCP serv...

Work on beads-eub: Consolidated context tool for MCP server (GH#636). Merge set_context, where_am_i, init into single 'context' tool. When done, submit MR (not PR) to integration branch for Refinery.


bd pin: pinned field overwritten by subsequent bd commands

## Summary

The `bd pin` command correctly sets `pinned=1` in SQLite, but any subsequent `bd` command (including read-only commands like `bd show`) resets `pinned` to 0.

## Reproduction Steps

```bash
bd --no-daemon pin <issue-id> --for=max
sqlite3 .beads/beads.db "SELECT id, pinned FROM issues WHERE id=\"<issue-id>\""
# Shows pinned=1 ✓

bd --no-daemon show <issue-id> --json
sqlite3 .beads/beads.db "SELECT id, pinned FROM issues WHERE id=\"<issue-id>\""
# Shows pinned=0 ✗ WRONG
```

## Root Cause Investigation

### Prime Suspects

1. **JSONL import overwrites DB** - The `pinned` field has `omitempty` so false values arent in JSONL. When JSONL is imported, it overwrites the DB pinned=1 with default pinned=0.

2. **Files to check:**
   - `internal/importer/importer.go` - ImportIssue() may unconditionally set all fields
   - `internal/storage/sqlite/issues.go` - UpsertIssue() may not preserve pinned
   - `cmd/bd/main.go` - ensureStoreActive() may trigger import

### Debug Steps

```bash
# Add debug logging to track what is writing pinned=0
grep -rn "pinned" internal/storage/sqlite/*.go
grep -rn "Pinned" internal/importer/*.go
```

## Likely Fix

In `internal/importer/importer.go` or `internal/storage/sqlite/issues.go`:

```go
// When upserting from JSONL, preserve pinned field if already set
func (s *SQLiteStorage) UpsertIssue(ctx context.Context, issue *types.Issue) error {
    // Check if issue exists and is pinned
    existing, _ := s.GetIssue(ctx, issue.ID)
    if existing != nil && existing.Pinned && !issue.Pinned {
        // Preserve existing pinned status
        issue.Pinned = existing.Pinned
    }
    // ... rest of upsert
}
```

OR the import should skip fields that are omitempty and not present in JSONL:

```go
// In importer, only update fields that are explicitly set in JSONL
// Pinned with omitempty means absent = dont change, not absent = false
```

## Testing

```bash
# After fix:
bd --no-daemon pin <issue-id> --for=max
bd --no-daemon show <issue-id> --json  # Should not reset pinned
bd list --pinned  # Should show the pinned issue
bd hook --agent max  # Should show pinned work
```

## Files to Modify

1. **internal/importer/importer.go** - Preserve pinned on import
2. **internal/storage/sqlite/issues.go** - UpsertIssue preserve pinned
3. **Add test** in internal/importer/importer_test.go

## Success Criteria
- `bd pin` survives subsequent bd commands
- `bd list --pinned` shows pinned issues
- `bd hook --agent X` shows pinned work
- Existing tests still pass


Design contributor namespace isolation for beads pollution prevention

## Problem

When contributors work on beads-the-project using beads-the-tool, their personal work-tracking issues leak into PRs. The .beads/issues.jsonl is intentionally tracked (it's the project's issue database), but contributors' local issues pollute the diff.

This is a recursion problem unique to self-hosting projects.

## Possible Solutions to Explore

1. **Contributor namespaces** - Each contributor gets a private prefix (e.g., `bd-steve-xxxx`) that's gitignored or filtered
2. **Separate database** - Contributors use BEADS_DIR pointing elsewhere for personal tracking
3. **Issue ownership/visibility flags** - Mark issues as "local-only" vs "project"
4. **Prefix-based filtering** - Configure which prefixes are committed vs ignored

## Design Considerations

- Should be zero-friction for contributors (no manual setup)
- Must not break existing workflows
- Needs to work with sync/collaboration features
- Consider: what if a "personal" issue graduates to "project" issue?

## Expansion Needed

This is a placeholder. Needs detailed design exploration before implementation.


Merge: bd-ykd9

branch: polecat/Doctor
target: main
source_issue: bd-ykd9
rig: beads


Update version to {{version}} in version.go

Edit cmd/bd/version.go line 17:

```go
Version = "{{version}}"
```

Verify with: `grep 'Version =' cmd/bd/version.go`


Rename ephemeral → wisp throughout codebase

## The Change

Rename 'ephemeral' to 'wisp' throughout the beads codebase.

## Why

**Ephemeral** is:
- 4 syllables (too long)
- Greek/academic (doesn't match bond/burn/squash)
- Overused in tech (K8s, networking, storage)
- Passive/descriptive

**Wisp** is:
- 1 syllable (matches bond/burn/squash)
- Evocative - you can SEE a wisp
- Steam engine metaphor - Gas Town is engines, steam wisps rise and dissipate
- Will-o'-the-wisp - transient spirits that guide then vanish
- Unique - nobody else uses it

## The Steam Engine Metaphor

```
Engine does work → generates steam
Steam wisps rise → execution trace
Steam condenses → digest (distillate)
Steam dissipates → cleaned up (burned)
```

## Full Vocabulary

| Term | Meaning |
|------|---------|
| bond | Attach proto to work (creates wisps) |
| wisp | Temporary execution step |
| squash | Condense wisps into digest |
| burn | Destroy wisps without record |
| digest | Permanent condensed record |

## Changes Required

### Code
- `Ephemeral bool` → `Wisp bool` in types/issue.go
- `--ephemeral` flag → remove (wisp is default)
- `--persistent` flag → keep as opt-out
- `bd cleanup --ephemeral` → `bd cleanup --wisps`
- Update all references in mol_*.go files

### Docs
- Update all documentation
- Update CLAUDE.md examples
- Update CLI help text

### Database Migration
- Add migration to rename field (or keep internal name, just change API)

## Example Usage After

```bash
bd mol bond mol-polecat-work   # Creates wisps (default)
bd mol bond mol-xxx --persistent  # Creates permanent issues
bd mol squash bd-xxx           # Condenses wisps → digest
bd cleanup --wisps             # Clean old wisps
bd list --wisps                # Show wisp issues
```


Update documentation for template system

Update AGENTS.md and help text to document the new template system:

- How to create a template (epic + template label + child issues)
- How to define variables (just use {{name}} placeholders)
- How to instantiate (bd template instantiate)
- Migration from YAML workflows (if any users had custom ones)


Code Review Followup Summary: PR #481 + PR #551

## Merged PRs Summary

### PR #551: Persist close_reason to issues table
- ✅ Merged successfully
- ✅ Bug fix: close_reason now persisted in database column (not just events table)
- ✅ Comprehensive test coverage added
- ✅ Handles reopen case (clearing close_reason)

**Followup Issues Filed:**
- bd-lxzx: Document close_reason in JSONL export format
- bd-077e: Update CLI documentation for close_reason field

---

### PR #481: Context Engineering Optimizations (80-90% context reduction)
- ✅ Merged successfully
- ✅ Lazy tool discovery: discover_tools() + get_tool_info()
- ✅ Minimal issue models: IssueMinimal (~80% smaller than full Issue)
- ✅ Result compaction: Auto-compacts results >20 items
- ✅ All 28 tests passing
- ⚠ Breaking change: ready() and list() return type changed

**Followup Issues Filed:**
- bd-b318: Add integration tests for CompactedResult
- bd-4u2b: Make compaction settings configurable (THRESHOLD, PREVIEW_COUNT)
- bd-2kf8: Document CompactedResult response format in CONTEXT_ENGINEERING.md
- bd-pdr2: Document backwards compatibility considerations

---

## Overall Assessment

Both PRs are production-ready with solid implementations. All critical functionality works and tests pass. Followup issues focus on:
1. Documentation improvements (5 issues)
2. Integration test coverage (1 issue)
3. Configuration flexibility (1 issue)
4. Backwards compatibility guidance (1 issue)

No critical bugs or design issues found.

## Review Completed By
Code review process completed. Issues auto-created for tracking improvements.


Fix multi-round convergence for N-way collisions

**Summary:** Multi-round collision resolution was identified as a critical issue preventing complete synchronization across distributed clones. The problem stemmed from incomplete final pulls that didn't fully propagate all changes between system instances.

**Key Decisions:**
- Implement multi-round sync mechanism
- Ensure bounded convergence (≤N rounds)
- Guarantee idempotent import without data loss

**Resolution:** Developed a sync strategy that ensures all clones converge to the same complete set of issues, unblocking the bd-cbed9619 epic and improving distributed system reliability.


Add bd reset command for clean slate restart

Implement a `bd reset` command to reset beads to a clean starting state.

## Context
GitHub issue #479 - users sometimes get beads into an invalid state after updates, and there's no clean way to start fresh. The git backup/restore mechanism that protects against accidental deletion also makes it hard to intentionally reset.

## Design

### Command Interface
```
bd reset [--hard] [--force] [--backup] [--dry-run] [--no-init]
```

| Flag | Effect |
|------|--------|
| `--hard` | Also remove from git index and commit |
| `--force` | Skip confirmation prompt |
| `--backup` | Create `.beads-backup-{timestamp}/` first |
| `--dry-run` | Preview what would happen |
| `--no-init` | Don't re-initialize after clearing |

### Reset Levels
1. **Soft Reset (default)** - Kill daemons, clear .beads/, re-init. Git history unchanged.
2. **Hard Reset (`--hard`)** - Also git rm and commit the removal, then commit fresh state.

### Implementation Flow
1. Validate .beads/ exists
2. If not --force: show impact summary, prompt confirmation
3. If --backup: copy .beads/ to .beads-backup-{timestamp}/
4. Kill daemons
5. If --hard: git rm + commit
6. rm -rf .beads/*
7. If not --no-init: bd init (and git add+commit if --hard)
8. Print summary

### Safety Mechanisms
- Confirmation prompt (skip with --force)
- Impact summary (issue/tombstone counts)
- Backup option
- Dry-run preview
- Git dirty check warning

### Code Structure
- `cmd/bd/reset.go` - CLI command
- `internal/reset/` - Core logic package


Remove Cache-Related Tests

Delete or update tests that assume multi-repo caching


Add test files for internal/storage

The internal/storage package has no test files at all. This package provides the storage interface abstraction.

Current coverage: N/A (no test files)
Target: Add basic interface tests


Run tests and verify build

Run the test suite to verify nothing is broken:

```bash
./scripts/test.sh
```

Or manually:
```bash
go build ./cmd/bd/...
go test ./...
```

Fix any failures before proceeding.


Tier 1: Ephemeral repo routing

Simplified: Make mol spawn set ephemeral=true on spawned issues.

## The Fix

Modify cloneSubgraph() in template.go to set Ephemeral: true:

```go
// template.go:474
newIssue := &types.Issue{
    Title:      substituteVariables(oldIssue.Title, vars),
    // ... existing fields ...
    Ephemeral:  true,  // ADD THIS LINE
}
```

## Optional: Add --persistent flag

Add flag to bd mol spawn for when you want spawned issues to persist:

```bash
bd mol spawn mol-code-review --var pr=123  # ephemeral (default)
bd mol spawn mol-code-review --var pr=123 --persistent  # not ephemeral
```

## Why This Is Simpler Than Original Design

Original design proposed separate ephemeral repo routing. After code review:

- Ephemeral field already exists in schema
- bd cleanup --ephemeral already works
- No new config needed
- No multi-repo complexity

## Acceptance Criteria

- bd mol spawn creates issues with ephemeral=true
- bd cleanup --ephemeral -f deletes them after closing
- --persistent flag opts out of ephemeral
- Existing molecules continue to work


Test Thread

Initial message for threading test


bd mol bond --ephemeral flag

Add --ephemeral flag to bd mol bond command.

## Behavior
- `bd mol bond <proto> --ephemeral` creates molecule in .beads-ephemeral/
- Without flag, creates in .beads/ (current behavior)
- Ephemeral molecules have `ephemeral: true` in their issue record

## Implementation
- Add --ephemeral bool flag to mol bond command
- Route to EphemeralStore when flag set
- Set ephemeral:true on created issue

## Testing
- Test mol bond creates in correct location
- Test ephemeral flag is persisted
- Test regular mol bond still works


Add close_reason to JSONL export format documentation

PR #551 now persists close_reason to the database, but there's a question about whether this field should be exported to JSONL format.

## Current State
- close_reason is stored in issues.close_reason column
- close_reason is also stored in events table (audit trail)
- The JSONL export format may or may not include close_reason

## Questions
1. Should close_reason be exported to JSONL format?
2. If yes, where should it go (root level or nested in events)?
3. Should there be any special handling to avoid duplication?
4. How should close_reason be handled during JSONL import?

## Why This Matters
- JSONL is the git-friendly sync format
- Other beads instances import from JSONL
- close_reason is meaningful data that should be preserved across clones

## Suggested Action
- Check if close_reason is currently exported in JSONL
- If not, add it to the export schema
- Document the field in JSONL format spec
- Add tests for round-trip (export -> import -> verify close_reason)


Review SQLite indexes and scaling bottlenecks

Audit the beads SQLite schema for:

## Index Review
- Are all frequently-queried columns indexed?
- Are compound indexes needed for common query patterns?
- Any missing indexes on foreign keys or filter columns?

## Scaling Bottlenecks
- How does performance degrade with 10k, 100k, 1M issues?
- Full table scans in hot paths?
- JSONL export/import performance at scale
- Transaction contention in multi-agent scenarios

## Common Query Patterns to Optimize
- bd ready (status + blocked_by resolution)
- bd list with filters (status, type, priority, labels)
- bd show with dependency graph traversal
- bd sync import/export

## Deliverables
- Document current indexes
- Identify missing indexes
- Benchmark key operations at scale
- Recommend schema improvements


bd init should stop running daemon to avoid stale cache

When running bd init, any running daemon continues with stale cached data, causing bd stats and other commands to show old counts.

Repro:
1. Have daemon running with 788 issues cached
2. Clean JSONL to 128 issues, delete db, run bd init
3. bd stats still shows 788 (daemon cache)
4. Must manually run bd daemon --stop

Fix: bd init should automatically stop any running daemon before reinitializing.


Monitor PyPI publish

Watch the PyPI publish action:
https://github.com/steveyegge/beads/actions/workflows/pypi-publish.yml

Verify at: https://pypi.org/project/beads-mcp/0.30.4/

Check:
```bash
pip index versions beads-mcp 2>/dev/null | grep -q '0.30.4'
```

```verify
pip index versions beads-mcp 2>/dev/null | grep -q '0.30.4' || curl -s https://pypi.org/pypi/beads-mcp/json | jq -e '.releases["0.30.4"]'
```


Merge: bd-14ie

branch: polecat/toast
target: main
source_issue: bd-14ie
rig: beads


Documentation for messaging and graph links

Document all new features.

Files to update:
- README.md - brief mention of messaging capability
- AGENTS.md - update for AI agents using bd mail
- docs/messaging.md (new) - full messaging reference
- docs/graph-links.md (new) - graph link reference
- CHANGELOG.md - v0.30.2 release notes

Topics to cover:
- Mail commands with examples
- Graph link types and use cases
- Identity configuration
- Hooks setup for notifications
- Migration notes


Implement core reset package (internal/reset)

Create the core reset logic in internal/reset/ package.

## Responsibilities
- ResetOptions struct with all flag options
- CountImpact() - count issues/tombstones that will be deleted
- ValidateState() - check .beads/ exists, check git dirty state
- ExecuteReset() - main reset logic (without CLI concerns)
- Integrate with daemon killall

## Interface Design
```go
type ResetOptions struct {
    Hard      bool   // Include git operations (git rm, commit)
    Backup    bool   // Create backup before reset
    DryRun    bool   // Preview only, don't execute
    SkipInit  bool   // Don't re-initialize after reset
}

type ResetResult struct {
    IssuesDeleted     int
    TombstonesDeleted int
    BackupPath        string  // if backup was created
    DaemonsKilled     int
}

type ImpactSummary struct {
    IssueCount      int
    OpenCount       int
    ClosedCount     int
    TombstoneCount  int
    HasUncommitted  bool  // git dirty state
}

func Reset(opts ResetOptions) (*ResetResult, error)
func CountImpact() (*ImpactSummary, error)
func ValidateState() error
```

## IMPORTANT: CLI vs Core Separation
- `Force` (skip confirmation) is NOT in ResetOptions - that's a CLI concern
- Core always executes when called; CLI decides whether to prompt first
- Keep CLI-agnostic: no prompts, no colored output, no user interaction
- Return errors for CLI to handle with user-friendly messages
- Unit testable in isolation

## Dependencies
- Uses daemon.KillAllDaemons() from internal/daemon/
- Calls bd init logic after reset (unless SkipInit)


Test hook


Phase 1.2 follow-up: Clarify format storage

Phase 1.2 created the bdt executable structure but issues.toon is currently stored in JSONL format, not TOON format.

This is intentional for now:
- Phase 1.2 (bd-jv4w): Just infrastructure - separate binary, separate directory
- Phase 1.3 (bd-j0tr): Implement actual TOON encoding/writing

For now, keep as-is: filename '.toon' signals intent, content is JSONL (interim format). Phase 1.3 will switch to actual TOON.


bd ready resolves external dependencies

Extend bd ready to check external blocked_by references:

1. Parse external:<project>:<capability> from blocked_by
2. Look up project path from external_projects config
3. Check if target project has provides:<capability> label on a closed issue
4. If not satisfied, issue is blocked

Example output:
```bash
bd ready
# gt-xyz: blocked by external:beads:mol-run-assignee (not provided)
# gt-abc: ready
```

Depends on: bd-om4a (external: prefix), bd-66w1 (config)

Part of cross-project dependency system.
See: gastown/docs/cross-project-deps.md


Add sync resilience guardrails for forced pushes and prefix mismatches

Beads can get into unrecoverable sync states when remote forces pushes occur (e.g., rebases) combined with prefix mismatches from multi-worker scenarios. Add detection, prevention, and auto-recovery features to handle this gracefully.


Test pinned issue


Introduce slog for structured daemon logging.

## Current State
Daemon uses fmt.Fprintf for logging:
```go
fmt.Fprintf(os.Stderr, "Warning: failed to detect user role: %v\n", err)
fmt.Fprintf(logFile, "[%s] %s\n", time.Now().Format(time.RFC3339), msg)
```

This produces unstructured, hard-to-parse logs.

## Target State
Use Go 1.21+ slog for structured logging:
```go
slog.Warn("failed to detect user role", "error", err)
slog.Info("sync completed", "created", 5, "updated", 3, "duration_ms", 150)
```

## Implementation

### 1. Create logger setup (internal/daemon/logger.go)

```go
package daemon

import (
    "io"
    "log/slog"
    "os"
)

// SetupLogger configures the daemon logger.
// Returns a cleanup function to close the log file.
func SetupLogger(logPath string, jsonFormat bool, level slog.Level) (func(), error) {
    var w io.Writer = os.Stderr
    var cleanup func()

    if logPath \!= "" {
        f, err := os.OpenFile(logPath, os.O_CREATE|os.O_APPEND|os.O_WRONLY, 0600)
        if err \!= nil {
            return nil, err
        }
        w = io.MultiWriter(os.Stderr, f)
        cleanup = func() { f.Close() }
    }

    var handler slog.Handler
    opts := &slog.HandlerOptions{Level: level}

    if jsonFormat {
        handler = slog.NewJSONHandler(w, opts)
    } else {
        handler = slog.NewTextHandler(w, opts)
    }

    slog.SetDefault(slog.New(handler))

    return cleanup, nil
}
```

### 2. Add log level flag

In cmd/bd/daemon.go:
```go
daemonCmd.Flags().String("log-level", "info", "Log level (debug, info, warn, error)")
daemonCmd.Flags().Bool("log-json", false, "Output logs in JSON format")
```

### 3. Replace fmt.Fprintf with slog calls

**Pattern 1: Simple messages**
```go
// Before
fmt.Fprintf(os.Stderr, "Starting daemon on %s\n", socketPath)

// After
slog.Info("starting daemon", "socket", socketPath)
```

**Pattern 2: Errors**
```go
// Before
fmt.Fprintf(os.Stderr, "Error: failed to connect: %v\n", err)

// After
slog.Error("failed to connect", "error", err)
```

**Pattern 3: Debug info**
```go
// Before
if debug {
    fmt.Fprintf(os.Stderr, "Received request: %s\n", method)
}

// After
slog.Debug("received request", "method", method)
```

**Pattern 4: Structured data**
```go
// Before
fmt.Fprintf(logFile, "Import: %d created, %d updated\n", created, updated)

// After
slog.Info("import completed",
    "created", created,
    "updated", updated,
    "unchanged", unchanged,
    "duration_ms", duration.Milliseconds())
```

### 4. Files to Update

| File | Changes |
|------|---------|
| cmd/bd/daemon.go | Add log flags, call SetupLogger |
| internal/daemon/server.go | Replace fmt with slog |
| internal/daemon/rpc_handler.go | Replace fmt with slog |
| internal/daemon/sync.go | Replace fmt with slog |
| internal/daemon/autoflush.go | Replace fmt with slog |
| internal/daemon/logger.go | New file |

### 5. Log output examples

**Text format (default):**
```
time=2025-12-23T12:30:00Z level=INFO msg="daemon started" socket=/tmp/bd.sock pid=12345
time=2025-12-23T12:30:01Z level=INFO msg="import completed" created=5 updated=3 duration_ms=150
time=2025-12-23T12:30:05Z level=WARN msg="sync branch diverged" local_ahead=2 remote_ahead=1
```

**JSON format (--log-json):**
```json
{"time":"2025-12-23T12:30:00Z","level":"INFO","msg":"daemon started","socket":"/tmp/bd.sock","pid":12345}
{"time":"2025-12-23T12:30:01Z","level":"INFO","msg":"import completed","created":5,"updated":3,"duration_ms":150}
```

## Migration Strategy

1. **Add logger.go** with SetupLogger
2. **Update daemon startup** to initialize slog
3. **Convert one file at a time** (start with server.go)
4. **Test after each file**
5. **Remove old logging code** once all converted

## Testing

```bash
# Start daemon with debug logging
bd daemon start --log-level debug

# Check logs
bd daemons logs . | head -20

# Test JSON output
bd daemon start --log-json --log-level debug
bd daemons logs . | jq .
```

## Success Criteria
- All daemon logging uses slog
- --log-level controls verbosity
- --log-json produces machine-parseable output
- Log entries have consistent structure
- No fmt.Fprintf to stderr in daemon code


bd sync fails with orphaned issues and duplicate ID conflict

After fixing the deleted_at TEXT column scanning bug (commit 18b1eb2), bd sync still fails with two issues:

1. Orphan Detection Warning: 12 orphaned child issues whose parents no longer exist (bd-cb64c226.* and bd-cbed9619.*)

2. Import Failure: UNIQUE constraint failed for bd-360 - this tombstone exists in both DB and JSONL

Error: "Import failed: error creating depth-0 issues: bulk insert issues: failed to insert issue bd-360: sqlite3: constraint failed: UNIQUE constraint failed: issues.id"

Fix options:
- Delete orphaned child issues with bd delete
- Resolve bd-360 duplicate (in deletions.jsonl vs tombstone in DB)
- Reset sync branch: git branch -f beads-sync main && git push --force-with-lease origin beads-sync

Fixed tombstone constraint violation bug. When deleting closed issues, the CHECK constraint (status = 'closed') = (closed_at IS NOT NULL) was violated because CreateTombstone didn't clear closed_at. Fix: set closed_at = NULL in tombstone creation SQL.

The sync data corruption (orphaned issues in beads-sync branch) requires manual cleanup: reset sync branch with 'git branch -f beads-sync main && git push --force-with-lease origin beads-sync'


Document sync.branch 'always dirty' working tree behavior

## Context

When sync.branch is configured, the .beads/issues.jsonl file in main's working tree is ALWAYS dirty. This is by design:

1. bd sync commits to beads-sync branch (via worktree)
2. bd sync copies JSONL to main's working tree (so CLI commands work)
3. This copy is NOT committed to main (to reduce commit noise)

Contributors who watch main branch history pushed for sync.branch to avoid constant beads commit noise. But users need to understand the trade-off.

## Documentation Needed

Update README.md sync.branch section with:

1. **Clear explanation** of why .beads/ is always dirty on main
2. **"Be Zen about it"** - this is expected, not a bug
3. **Workflow options:**
   - Accept dirty state, use `bd sync --merge` periodically to snapshot to main
   - Or disable sync.branch if clean working tree is more important
4. **Shell alias tip** to hide beads from git status:
   ```bash
   alias gs='git status -- ":!.beads/"'
   ```
5. **When to merge**: releases, milestones, or periodic snapshots

## Related

- bd-7b7h: Fix that allows bd sync --merge to work with dirty .beads/
- bd-elqd: Investigation that identified this as expected behavior


gt mq list shows empty when MRs exist


Commit and push release

git add -A && git commit && git push to trigger CI


Work on beads-7jl: Fix Windows installer file locking iss...

Work on beads-7jl: Fix Windows installer file locking issue (GH#652). Close file handle before extraction in postinstall.js. When done, submit MR (not PR) to integration branch for Refinery.


Fix daemon/direct mode inconsistency in relate and duplicate commands

The relate.go and duplicate.go commands have inconsistent daemon/direct mode handling:

When daemonClient is connected, they resolve IDs via RPC but then perform updates directly via store.UpdateIssue(), bypassing the daemon.

Affected locations:
- relate.go:125-139 (runRelate update)
- relate.go:235-246 (runUnrelate update)
- duplicate.go:120 (runDuplicate update)
- duplicate.go:207 (runSupersede update)

Should either use RPC for updates when daemon is running, or document why direct access is intentional.


Systematic bd sync stability investigation

## Context

bd sync has chronic instability issues that have persisted since inception:
- issues.jsonl is always dirty after push
- bd sync often creates messes requiring manual cleanup
- Problems escalating despite accumulated bug fixes
- Workarounds are getting increasingly draconian

## Goal

Systematically observe and diagnose bd sync failures rather than applying band-aid fixes.

## Approach

1. Start fresh session with latest binary (all fixes applied)
2. Run bd sync and carefully observe what happens
3. Document exact sequence of events when things go wrong
4. File specific issues for each discrete problem identified
5. Track the root causes, not just symptoms

## Test Environment

- Fresh clone or clean state
- Latest bd binary with all bug fixes
- Monitor both local and remote JSONL state
- Check for timing issues, race conditions, merge conflicts

## Success Criteria

- Identify root causes of sync instability
- Create actionable issues for each problem
- Eventually achieve stable bd sync (no manual intervention needed)


Fix update-homebrew.sh awk script corrupts formula

The awk script in scripts/update-homebrew.sh incorrectly removes platform conditionals (on_macos do, on_linux do, if Hardware::CPU.arm?, etc.) when updating SHA256 hashes. This corrupts the Homebrew formula.

The issue is the awk script uses 'next' to skip lines containing platform conditionals but never reconstructs them, resulting in a syntax-invalid formula.

Found during v0.34.0 release - had to manually fix the formula.

Fix options:
1. Rewrite awk script to properly preserve structure while updating sha256 lines only
2. Use sed instead with targeted sha256 replacements
3. Template approach - store formula template and fill in version/hashes


Add GetMoleculeProgress RPC endpoint

New RPC endpoint to get detailed progress for a specific molecule. Returns: moleculeID, title, assignee, and list of steps with their status (done/current/ready/blocked), start/close times. Used when user expands a worker in the activity feed TUI.


Add bd daemon --stop-all command to kill all daemon processes

Currently there's no easy way to stop all running bd daemon processes. Users must resort to pkill -f 'bd daemon' or similar shell commands.

Add a --stop-all flag to bd daemon that:
1. Finds all running bd daemon processes (not just the current repo's daemon)
2. Gracefully stops them all
3. Reports how many were stopped

This is useful when:
- Multiple daemons are running and causing race conditions
- User wants a clean slate before running bd sync
- Debugging daemon-related issues


Rebuild local binary

Build and verify: go build -o bd ./cmd/bd && ./bd version


Simplify bd onboard to minimal AGENTS.md snippet pointing to bd prime

## Context
GH#604 raised concerns about bd onboard bloating AGENTS.md with ~100+ lines of static instructions that:
- Load every session whether beads is being used or not
- Get stale when bd upgrades
- Waste tokens

## Solution
Simplify `bd onboard` to output a minimal snippet (~2 lines) that points to `bd prime`:

```markdown
## Issue Tracking
This project uses beads (`bd`) for issue tracking.
Run `bd prime` for workflow context, or hooks auto-inject it.
```

## Rationale
- `bd prime` is dynamic, concise (~80 lines), and always matches installed bd version
- Hooks already auto-inject `bd prime` at session start when .beads/ detected
- AGENTS.md only needs to mention beads exists, not contain full instructions

## Implementation
1. Update `cmd/bd/onboard.go` to output minimal snippet
2. Keep `--output` flag for BD_GUIDE.md generation (may still be useful)
3. Update help text to explain the new approach


Re: Thread Test 2

Got your message. Testing reply feature.


Polecats get stuck on interactive shell prompts (cp/mv/rm -i)

During swarm operations, polecats frequently get stuck waiting for interactive prompts from shell commands like:
- cp prompting 'overwrite file? (y/n)'
- mv prompting 'overwrite file? (y/n)'
- rm prompting 'remove file?'

This happens because macOS aliases or shell configs may have -i flags set by default.

Root cause: Claude Code runs commands that trigger interactive confirmation prompts, but cannot respond to them, causing the agent to hang indefinitely.

Observed in: Multiple polecats during GH issues swarm (Dec 2024)
- Derrick, Roustabout, Prospector, Warboy all got stuck on y/n prompts

Suggested fixes:
1. AGENTS.md should instruct agents to always use -f flag with cp/mv/rm
2. Polecat startup could set shell aliases to use non-interactive versions
3. bd prime hook could include guidance about non-interactive commands
4. Consider detecting stuck prompts and auto-recovering


Final release verification

Verify all release artifacts are accessible:

- [ ] `bd --version` shows 0.30.4
- [ ] `bd version --daemon` shows 0.30.4
- [ ] GitHub release exists: https://github.com/steveyegge/beads/releases/tag/v0.30.4
- [ ] `brew upgrade beads && bd --version` shows 0.30.4 (if using Homebrew)
- [ ] `pip show beads-mcp` shows 0.30.4
- [ ] npm package available at 0.30.4
- [ ] `bd info --whats-new` shows 0.30.4 notes

Run final checks:
```bash
bd --version
bd version --daemon
pip show beads-mcp | grep Version
bd info --whats-new
```


bd mol run: panic slice bounds out of range in mol_run.go:130

## Problem
bd mol run panics after successfully creating the molecule:

```
✓ Molecule running: created 9 issues
  Root issue: gt-i4lo (pinned, in_progress)
  Assignee: stevey

Next steps:
  bd ready                # Find unblocked work in this molecule
panic: runtime error: slice bounds out of range [:8] with length 7

goroutine 1 [running]:
main.runMolRun(0x1014fc0c0, {0x140001e0f80, 0x1, 0x10089daad?})
  /Users/stevey/gt/beads/crew/dave/cmd/bd/mol_run.go:130 +0xc38
```

## Reproduction
```bash
bd --no-daemon mol run gt-lwuu --var issue=gt-test123
```
Where gt-lwuu is a mol-polecat-work proto with 8 child steps.

## Impact
The molecule IS created successfully - the panic happens after creation when formatting the "Next steps" output.


Update LINTING.md with current baseline

After cleanup, document the remaining acceptable baseline in LINTING.md so we can track regression.


Push commit and tag to origin

```bash
git push origin main
git push origin v0.30.4
```

This triggers GitHub Actions:
- GoReleaser build
- PyPI publish
- npm publish

```verify
git ls-remote origin refs/tags/v0.30.4 | grep -q 'v0.30.4'
```


Tier 5 (Future): JSONL archive rotation

Periodic rotation of issues.jsonl for long-running repos.

## Design

.beads/
├── issues.jsonl           # Current (hot)
├── archive/
│   ├── issues-2025-12.jsonl.gz  # Archived (cold)
│   └── ...
└── index.jsonl            # Merged index for queries

## Commands

bd archive rotate [flags]
  --older-than N    Archive issues closed > N days
  --compress        Gzip archives
  --dry-run         Preview

bd archive list           # Show archived periods
bd archive restore <period>  # Restore from archive

## Config

bd config set archive.enabled true
bd config set archive.rotate_days 90
bd config set archive.compress true
bd config set archive.path '.beads/archive'

## Considerations

- Archives can be gitignored (local only) or committed (shared)
- Query layer must check index, hydrate from archive
- Cold storage tiering (S3/GCS) for enterprise
- Merkle proofs preserved for audit

## Priority

This is post-1.0 work. Current focus is on squash (removes ephemeral).
Archive helps with long-term history but is less critical.


BondRef.ProtoID field name is misleading for mol+mol bonds

In bondMolMol, the BondRef.ProtoID field is used to store molecule IDs:

```go
BondedFrom: append(molA.BondedFrom, types.BondRef{
    ProtoID:   molB.ID,  // This is a molecule, not a proto
    ...
})
```

This is semantically confusing since ProtoID suggests it should only hold proto references.

**Options:**
1. Rename ProtoID to SourceID (breaking change, needs migration)
2. Add documentation clarifying ProtoID can hold molecule IDs in bond context
3. Leave as-is, accept the naming is imprecise

Low priority since it's just naming, not functionality.


Schema: Add message type and new fields

Add to internal/storage/sqlite/schema.go and models:

New issue_type value:
- message

New optional fields on Issue struct:
- Sender string (who sent this)
- Ephemeral bool (can be bulk-deleted)
- RepliesTo string (issue ID for threading)
- RelatesTo []string (issue IDs for knowledge graph)
- Duplicates string (canonical issue ID)
- SupersededBy string (replacement issue ID)

Update:
- internal/storage/sqlite/schema.go - add columns
- internal/models/issue.go - add fields to struct
- internal/storage/sqlite/sqlite.go - CRUD operations
- Create migration from v0.30.1

Ensure backward compatibility - all new fields optional.


Add timeout message for long-running git push operations

When git push hangs waiting for credential/browser auth, show a periodic message to the user instead of appearing frozen. Add timeout messaging after N seconds of inactivity during git operations.


Update docs for import bug fix

Update AGENTS.md, README.md, TROUBLESHOOTING.md with import.orphan_handling config documentation. Document resurrection behavior, tombstones, config modes. Add troubleshooting section for import failures with deleted parents.


Improve test coverage for internal/daemon (27.3% → 60%)

The daemon package has only 27.3% test coverage. The daemon is critical for background operations and reliability.

Key areas needing tests:
- Daemon autostart logic
- Socket handling
- PID file management
- Health checks

Current coverage: 27.3%
Target coverage: 60%


bd template commands fail with daemon mode

The `bd template show` and `bd template instantiate` commands fail with 'Error loading template: no database connection' when daemon is running.

**Reproduction:**
```bash
bd daemon --start
bd template show bd-qqc  # Error: no database connection
bd template show bd-qqc --no-daemon  # Works
```

**Expected:** Template commands should work with daemon like other commands.

**Workaround:** Use `--no-daemon` flag.

**Location:** Likely in cmd/bd/template.go - daemon RPC path not implemented for template operations.


Install 0.30.4 Go binary locally

Rebuild and install the Go binary:
```bash
go install ./cmd/bd
# OR
make install
```

Verify:
```bash
bd --version
```

```verify
bd --version 2>&1 | grep -q '0.30.4'
```


Bump version in all files

Run ./scripts/bump-version.sh 0.33.2 to update 10 version files. Then run with --commit after info.go is updated.


Work on beads-399: Add omitempty to JSONL fields for smal...

Work on beads-399: Add omitempty to JSONL fields for smaller notifications. When done, submit MR (not PR) to integration branch for Refinery.


Daemon should be singleton and aggressively kill stale instances

Found 2 bd daemons running (PIDs 76868, 77515) during shutdown. The daemon should:

1. Be a singleton - only one instance per rig allowed
2. On startup, check for existing daemon and kill it before starting
3. Use a PID file or lock file to enforce this

Currently stale daemons can accumulate, causing confusion and resource waste.

**Investigation 2025-12-21:**

The singleton mechanism is already implemented and working correctly:

1. **daemon.lock** uses flock (exclusive non-blocking) to prevent duplicate daemons
2. **bd.sock.startlock** coordinates concurrent auto-starts via O_CREATE|O_EXCL
3. **Registry** tracks all daemons globally in ~/.beads/registry.json

Testing shows:
- Trying to start a second daemon gives: 'Error: daemon already running (PID X)'
- Multiple daemons for *different* rigs is expected/correct behavior

The original report ('Found 2 bd daemons running PIDs 76868, 77515') was likely:
1. Two daemons for different rigs (expected), OR
2. An edge case that's since been fixed

Consider closing as RESOLVED or clarifying the original scenario.


Phase 1.1: TOON Library Integration - Add gotoon dependency

Add gotoon (github.com/alpkeskin/gotoon) to go.mod and create internal/toon wrapper package for TOON encoding/decoding. This enables bdtoon to encode Issue structs to TOON format and decode TOON back to issues.

## Subtasks
1. Add gotoon dependency: go get github.com/alpkeskin/gotoon
2. Create internal/toon package with wrapper functions
3. Write encode tests for Issue struct round-trip conversion
4. Write decode tests for TOON to Issue conversion
5. Add gotoon API options to wrapper (indent, delimiter, length markers)

## Success Criteria
- go.mod includes gotoon dependency
- internal/toon/encode.go exports EncodeTOON(issues) ([]byte, error)
- internal/toon/decode.go exports DecodeTOON(data []byte) ([]Issue, error)
- Round-trip tests verify Issue → TOON → Issue produces identical data
- Tests pass with: go test ./internal/toon -v


Add --hard flag to bd cleanup to permanently cull tombstones before cutoff date

Currently tombstones persist for 30 days before cleanup prunes them. Need an official way to force-cull tombstones earlier than the default TTL, for scenarios like cleaning house after extended absence where resurrection from old clones is not a concern. Proposed: bd cleanup --hard --older-than N to bypass the 30-day tombstone TTL.


bd activity: Real-time molecule state feed

Implement activity feed command for watching molecule state transitions.

## Commands
```bash
bd activity --follow              # Real-time streaming
bd activity --mol <id>            # Activity for specific molecule
bd activity --since 5m            # Last 5 minutes
bd activity --type step           # Only step transitions
```

## Output Format
```
[14:32:01] ✓ patrol-x7k.inbox-check completed
[14:32:03] ✓ patrol-x7k.check-refinery completed
[14:32:08] + patrol-x7k.arm-ace bonded (5 steps)
[14:32:09] → patrol-x7k.arm-ace.capture in_progress
[14:32:10] ✓ patrol-x7k.arm-ace.capture completed
[14:32:14] ✓ patrol-x7k.arm-ace.decide completed (action: nudge-1)
[14:32:17] ✓ patrol-x7k.arm-ace COMPLETE
[14:32:23] ✓ patrol-x7k SQUASHED → digest-x7k
```

## Event Types
- `+` bonded - New molecule/step created
- `→` in_progress - Step started
- `✓` completed - Step/molecule finished
- `✗` failed - Step failed
- `⊘` burned - Wisp discarded
- `◉` squashed - Wisp condensed to digest

## Implementation
- Could use SQLite triggers or polling
- --follow uses OS file watching or polling
- Filter by mol ID, type, time range


mol-christmas-launch: 3-day execution plan

Christmas Launch Molecule - execute phases in order, survive restarts.

PIN THIS BEAD. Check progress each session start.

## Step: phase0-beads-foundation
Fix blocking issues before swarming:
1. Verify gastown beads schema works: bd list --status=open
2. Ensure bd mol bond exists (check bd-usro)
3. Verify bd-2vh3 (squash) is filed

## Step: phase1-polecat-loop
Serial work on polecat execution:
1. gt-9nf: Fresh polecats only
2. gt-975: Molecule execution support
3. gt-8v8: Refuse uncommitted work
Then swarm: gt-e1y, gt-f8v, gt-eu9
Needs: phase0-beads-foundation

## Step: phase2-refinery
Serial work on refinery autonomy:
1. gt-5gkd: Refinery CLAUDE.md
2. gt-bj6f: Refinery context in gt prime
3. gt-0qki: Refinery-Witness protocol
Needs: phase1-polecat-loop

## Step: phase3-deacon
Health monitoring infrastructure:
1. gt-5af.4: Simplify daemon
2. gt-5af.7: Crew session patterns
3. gt-976: Crew lifecycle
Needs: phase2-refinery

## Step: phase4-code-review
Self-improvement flywheel:
1. Define mol-code-review (gt-fjvo)
2. Test on open MRs
3. Integrate with Refinery
Needs: phase3-deacon

## Step: phase5-polish
Demo readiness:
1. gt-b2hj: Find orphaned work
2. Doctor checks
3. Clean up open MRs
Needs: phase4-code-review

## Step: verify-flywheel
Success criteria:
- gt spawn works with molecules
- Refinery processes MRs autonomously
- mol-code-review runs on a PR
- bd cleanup --ephemeral works
Needs: phase5-polish


Auto-migrate database on CLI version bump

When CLI is upgraded (e.g., 0.24.0 → 0.24.1), database version becomes stale. Add auto-migration in PersistentPreRun or daemon startup. Check dbVersion != CLIVersion and run bd migrate automatically. Fixes recurring UX issue where bd doctor shows version mismatch after every CLI upgrade.


Push release v0.33.2 to remote

Push the commit and tag:

```bash
git push && git push --tags
```

Verify on GitHub that the tag appears in releases.


Auto-repair stale merge driver configs with invalid placeholders

Old bd versions (<0.24.0) installed merge driver with invalid placeholders %L %R instead of %A %B. Add detection to bd doctor --fix: check if git config merge.beads.driver contains %L or %R, auto-repair to 'bd merge %A %O %A %B'. One-time migration for users who initialized with old versions.


bd prime: AI context loading and Claude Code integration

Implement `bd prime` command and Claude Code hooks for context recovery. Hooks work with BOTH MCP server and CLI approaches - they solve the context memory problem (keeping bd workflow fresh after compaction) not the tool access problem (MCP vs CLI).


Add orphan detection migration

Create migration to detect orphaned children in existing databases. Query: SELECT id FROM issues WHERE id LIKE '%.%' AND substr(id, 1, instr(id || '.', '.') - 1) NOT IN (SELECT id FROM issues). Log results, let user decide action (delete orphans or convert to top-level).


bd mol squash handles wisp→digest

Update bd mol squash to handle ephemeral molecules.

## Behavior for Ephemeral Molecules
1. Delete wisp from .beads-ephemeral/
2. Create digest issue in .beads/ (permanent)
3. Digest has type:digest and squashed_from field

## Digest Format
```json
{
  "id": "<parent>.digest-NNN",
  "type": "digest",
  "title": "<proto> cycle @ <timestamp>",
  "description": "<summary from --summary flag>",
  "parent": "<proto-id>",
  "squashed_from": "<wisp-id>"
}
```

## Implementation
- Detect if molecule is ephemeral (check storage location or flag)
- Delete from ephemeral store
- Create digest in permanent store
- Return digest ID

## Testing
- Test squash of ephemeral mol creates digest
- Test wisp is deleted after squash
- Test digest is queryable


Redesign workflow system: templates as native Beads

## Problem

The current workflow system (YAML templates in cmd/bd/templates/workflows/) is architecturally flawed:

1. **Out-of-band data plane** - YAML files are a parallel system outside Beads itself
2. **Heavyweight DSL** - YAML is gross; even TOML would have been better, but neither is ideal
3. **Not graph-native** - Beads IS already a dependency graph with priorities, so why reinvent it?
4. **Can't use bd commands on templates** - They're opaque YAML, not viewable/editable Beads

## The Right Design

**Templates should be Beads themselves.**

A "workflow template" should be:
- An epic marked as a template (via label, type, or prefix like `tpl-`)
- Child issues with dependencies between them (using normal bd dep)
- Titles and descriptions containing `{{variable}}` placeholders
- Normal priorities that control serialization order

"Instantiation" becomes:
1. Clone the template subgraph (epic + children + dependencies)
2. Substitute variables in titles/descriptions
3. Generate new IDs for all cloned issues
4. Return the new epic ID

## Benefits

- **No YAML** - Templates are just Beads
- **Use existing tools** - `bd show`, `bd edit`, `bd dep` work on templates
- **Graph-native** - Dependencies are real Beads dependencies
- **Simpler codebase** - Remove all the YAML parsing/workflow code
- **Composable** - Templates can reference other templates

## Tasks

1. Delete the YAML workflow system code (revert recent push + remove existing workflow code)
2. Design template marking convention (label? type? id prefix?)
3. Implement `bd template create` or `bd clone --as-template`
4. Implement `bd template instantiate <template-id> --var key=value`
5. Migrate version-bump workflow to native Beads template
6. Update documentation


Consolidate duplicate path-finding utilities (findJSONLPath, findBeadsDir, findGitRoot)

Code health review found these functions defined in multiple places:

- findJSONLPath() in autoflush.go:45-73 and doctor/fix/migrate.go
- findBeadsDir() in autoimport.go:197-239 (with git worktree handling)
- findGitRoot() in autoimport.go:242-269 (Windows path conversion)

The beads package has public FindBeadsDir() and FindJSONLPath() APIs that should be used consistently.

Impact: Bug fixes need to be applied in multiple places. Git worktree handling may not be replicated everywhere.

Fix: Consolidate all implementations to use the beads package APIs. Remove duplicates.


Add composite index (issue_id, type) on dependencies table

GetBlockedIssues uses EXISTS clauses that filter by issue_id AND type together.

**Query pattern (ready.go:427-429):**
```sql
EXISTS (
  SELECT 1 FROM dependencies d2
  WHERE d2.issue_id = i.id AND d2.type = 'blocks'
)
```

**Problem:** Only idx_dependencies_issue exists. SQLite must filter type after index lookup.

**Solution:** Add migration:
```sql
CREATE INDEX IF NOT EXISTS idx_dependencies_issue_type ON dependencies(issue_id, type);
```

**Note:** This complements the existing idx_dependencies_depends_on_type for the reverse direction.


Add daemon-side delete operation tests

Follow-up epic for PR #626: Add comprehensive test coverage for delete operations at the daemon/RPC layer. PR #626 successfully added storage layer tests but identified gaps in daemon-side delete operations and RPC integration testing.

## Scope
Tests needed for:
1. deleteViaDaemon (cmd/bd/delete.go:21) - RPC client-side deletion command
2. Daemon RPC delete handler - Server-side deletion via daemon
3. createTombstone wrapper (cmd/bd/delete.go:335) - Tombstone creation wrapper
4. deleteIssue wrapper (cmd/bd/delete.go:349) - Direct deletion wrapper

## Coverage targets
- Delete via RPC daemon (both success and error paths)
- Cascade deletion through daemon
- Force deletion through daemon
- Dry-run mode validation
- Tombstone creation and verification
- Error handling and edge cases


Test body-file

This is a test description from a file.

It has multiple lines.


Test pinned for stats


Run tests and verify build

Run the test suite to verify nothing is broken:

```bash
./scripts/test.sh
```

Or manually:
```bash
go build ./cmd/bd/...
go test ./...
```

Fix any failures before proceeding.


bd doctor should recommend bd prime migration for existing repos

bd doctor should detect old beads integration patterns and recommend migrating to bd prime approach.

## Current behavior
- bd doctor checks if Claude hooks are installed globally
- Doesn't check project-level integration (AGENTS.md, CLAUDE.md)
- Doesn't recommend migration for repos using old patterns

## Desired behavior
bd doctor should detect and suggest:

1. **Old slash command pattern detected**
   - Check for /beads:* references in AGENTS.md, CLAUDE.md
   - Suggest: These slash commands are deprecated, use bd prime hooks instead

2. **No agent documentation**
   - Check if AGENTS.md or CLAUDE.md exists
   - Suggest: Run 'bd onboard' or 'bd setup claude' to document workflow

3. **Old MCP-only pattern**
   - Check for instructions to use MCP tools but no bd prime hooks
   - Suggest: Add bd prime hooks for better token efficiency

4. **Migration path**
   - Show: 'Run bd setup claude to add SessionStart/PreCompact hooks'
   - Show: 'Update AGENTS.md to reference bd prime instead of slash commands'

## Example output

⚠ Warning: Old beads integration detected in CLAUDE.md
  Found: /beads:* slash command references (deprecated)
  Recommend: Migrate to bd prime hooks for better token efficiency
  Fix: Run 'bd setup claude' and update CLAUDE.md

💡 Tip: bd prime + hooks reduces token usage by 80-99% vs slash commands
  MCP mode: ~50 tokens vs ~10.5k for full MCP scan
  CLI mode: ~1-2k tokens with automatic context recovery

## Benefits
- Helps existing repos adopt new best practices
- Clear migration path for users
- Better token efficiency messaging


test hook pin


Add gate fields: await_type, await_id, timeout, waiters

Add gate-specific fields to the Issue type.

## New Fields
- await_type: string - Type of condition (gh:run, gh:pr, timer, human, mail)
- await_id: string - Identifier for the condition
- timeout: duration - Max time to wait before escalation
- waiters: []string - Mail addresses to notify when gate clears

## Implementation
- Add fields to Issue struct in internal/types/types.go
- Update SQLite schema for new columns
- Add JSONL serialization/deserialization
- Update import/export logic


Work on beads-ocs: Thin shim hooks to eliminate version d...

Work on beads-ocs: Thin shim hooks to eliminate version drift (GH#615). Replace full hook scripts with thin shims that call bd hooks run. When done, submit MR (not PR) to integration branch for Refinery.


Add bd template list command

Add a convenience command to list available templates:

bd template list

This is equivalent to 'bd list --label=template' but more discoverable.
Could also show variable placeholders found in each template.


Test and document molecular chemistry commands

## Context

Implemented the molecular chemistry UX commands per the design docs:
- gastown/mayor/rig/docs/molecular-chemistry.md
- gastown/mayor/rig/docs/chemistry-design-changes.md

Commit: cadf798b

## New Commands to Test

| Command | Purpose |
|---------|---------|
| `bd pour <proto>` | Instantiate proto as persistent mol |
| `bd wisp create <proto>` | Instantiate proto as ephemeral wisp |
| `bd hook [--agent]` | Inspect what's on an agent's hook |

## Enhanced Commands to Test

| Command | Changes |
|---------|---------|
| `bd mol spawn --pour` | New flag, `--persistent` deprecated |
| `bd mol bond --pour` | Force liquid phase on wisp target |
| `bd pin --for <agent> --start` | Chemistry workflow support |

## Test Scenarios

1. **bd pour**: Create persistent mol from a proto
   - Verify creates in .beads/ (not .beads-wisp/)
   - Verify variable substitution works
   - Verify --dry-run works

2. **bd wisp create**: Create ephemeral wisp from proto
   - Verify creates in .beads-wisp/
   - Verify bd wisp list shows it
   - Verify bd mol squash works
   - Verify bd mol burn works

3. **bd hook**: Inspect pinned work
   - Pin something, verify bd hook shows it
   - Test --agent flag
   - Test --json output

4. **bd pin --for**: Assign work to agent
   - Verify sets pinned=true
   - Verify sets assignee
   - Verify --start sets status=in_progress

5. **bd mol bond --pour**: Force liquid on wisp target
   - Bond a proto to a wisp with --pour
   - Verify spawned issues are in .beads/

## Documentation

- Update CLAUDE.md with new commands
- Add examples to --help output (already done)
- Consider adding to docs/CLI_REFERENCE.md

## Code Review

- Check for edge cases
- Verify error messages are helpful
- Ensure --json output is consistent


Migration invariants should exclude external dependencies from orphan check

## Summary

The `checkForeignKeys` function in `migration_invariants.go` flags external dependencies as orphaned because they dont exist in the local issues table.

## Location

`internal/storage/sqlite/migration_invariants.go` around line 150-162

## Current Code (buggy)

```go
// Check for orphaned dependencies
var orphanCount int
err = db.QueryRowContext(ctx, \`
    SELECT COUNT(*)
    FROM dependencies d
    WHERE NOT EXISTS (SELECT 1 FROM issues WHERE id = d.depends_on_id)
\`).Scan(&orphanCount)
```

## Fix

Exclude external references (format: `external:<project>:<capability>`):

```go
// Check for orphaned dependencies (excluding external refs)
var orphanCount int
err = db.QueryRowContext(ctx, \`
    SELECT COUNT(*)
    FROM dependencies d
    WHERE NOT EXISTS (SELECT 1 FROM issues WHERE id = d.depends_on_id)
      AND d.depends_on_id NOT LIKE 'external:%'
\`).Scan(&orphanCount)
```

## Reproduction

```bash
# Add external dependency
bd dep add bd-xxx external:other-project:some-capability

# Try to sync - fails
bd sync
# Error: found 1 orphaned dependencies
```

## Files to Modify

1. **internal/storage/sqlite/migration_invariants.go** - Add WHERE clause

## Testing

```bash
# Create issue with external dep
bd create "Test external deps" -t task
bd dep add bd-xxx external:beads:release-workflow

# Sync should succeed
bd sync

# Verify dep exists
bd show bd-xxx --json | jq .dependencies
```

## Success Criteria
- External dependencies dont trigger orphan check
- `bd sync` succeeds with external deps
- Regular orphan detection still works for internal deps


Issue lifecycle hooks (on-close, on-complete)

Add hooks that fire on issue state transitions, enabling automation like closing linked GitHub issues.

## Problem

We have `external_ref` to link beads issues to external systems (GitHub, Linear, Jira), but no mechanism to trigger actions when issues close. Currently:

```
bd-u2sc (external_ref: gh-692) closes → nothing happens
```

## Proposed Solution

### Phase 1: Shell Hooks

Add `.beads-hooks/on-close.sh` (and similar lifecycle hooks):

```bash
# .beads-hooks/on-close.sh
# Called by bd close with issue JSON on stdin
#\!/bin/bash
issue=$(cat)
external_ref=$(echo "$issue" | jq -r '.external_ref // empty')
if [[ "$external_ref" == gh-* ]]; then
    number="${external_ref#gh-}"
    gh issue close "$number" --repo steveyegge/beads \
      --comment "Completed via beads epic $(echo $issue | jq -r .id)"
fi
```

### Lifecycle Events

| Event | Trigger | Use Cases |
|-------|---------|-----------|
| `on-close` | Issue closed | Close external refs, notify, archive |
| `on-complete` | Epic children all done | Roll-up completion, close parent refs |
| `on-status-change` | Any status transition | Sync to external systems |

### Phase 2: Molecule Completion Handlers

Molecules could define completion actions:

```yaml
name: github-issue-tracker
on_complete:
  - action: shell
    command: gh issue close {{external_ref}} --repo {{repo}}
  - action: mail
    to: mayor/
    subject: "Epic {{id}} completed"
```

### Phase 3: Gas Town Integration

For full Gas Town deployments:
- Witness observes closures via beads events
- Routes to integration agents via mail
- Agents handle external system interactions

## Implementation Notes

- Hooks should be async (don't block bd close)
- Pass full issue JSON to hook via stdin
- Support hook timeout and failure handling
- Consider `--no-hooks` flag for bulk operations

## Related

- `external_ref` field already exists (GH#142)
- Cross-project deps: bd-h807, bd-d9mu
- Git hooks: .beads-hooks/ pattern established

## Use Cases

1. **GitHub integration**: Close GH issues when beads epic completes
2. **Linear sync**: Update Linear status when beads status changes
3. **Notifications**: Send mail/Slack when high-priority issues close
4. **Audit**: Log all closures to external system


Test issue 2


Exclude pinned issues from bd blocked

Update bd blocked to exclude pinned issues. Pinned issues are context markers and should not appear in the blocked work list.


Hooks System

Implement hook system for extensibility.

Hook directory: .beads/hooks/
Hook files (executable scripts):
- on_create - runs after bd create
- on_update - runs after bd update
- on_close - runs after bd close
- on_message - runs after bd mail send

Hook invocation:
- Pass issue ID as first argument
- Pass event type as second argument
- Pass JSON issue data on stdin
- Run asynchronously (dont block command)

Example hook (GGT notification):
  #!/bin/bash
  gt notify --event=$2 --issue=$1

This allows GGT to register notification handlers without Beads knowing about GGT.


Correction: Pinned field already in v0.31.0

Quick correction - the Pinned field is already in the current bd v0.31.0:

```go
// In beads internal/types/types.go
Pinned bool `json:"pinned,omitempty"`
```

So you just need to:
1. Add `Pinned bool `json:"pinned,omitempty"`` to BeadsMessage in types.go
2. Sort pinned messages first in listBeads() after fetching

No migration needed - the field is already there.

-- Mayor


Refactor mol.go: split 1200+ line file into subcommands

## Problem

cmd/bd/mol.go has grown to 1200+ lines with all molecule subcommands in one file.

## Current State
- mol.go: 1218 lines (bond, spawn, run, distill, catalog, show, etc.)
- Hard to navigate, review, and maintain

## Proposed Structure
Split into separate files by subcommand:
```
cmd/bd/
├── mol.go           # Root command, shared helpers
├── mol_bond.go      # bd mol bond
├── mol_spawn.go     # bd mol spawn
├── mol_run.go       # bd mol run
├── mol_distill.go   # bd mol distill
├── mol_catalog.go   # bd mol catalog
├── mol_show.go      # bd mol show
└── mol_test.go      # Tests (already separate)
```

## Benefits
- Easier code review
- Better separation of concerns
- Simpler navigation
- Each subcommand self-contained


Phase 2.2: Switch bdt storage to TOON format

Currently bdt stores issues in JSONL format in issues.toon file. Phase 2.2 must implement actual TOON format storage - this is the fundamental goal of the bdtoon project.

## Current State (Phase 2.1)
- issues.toon stores JSONL (intermediate format)
- --toon flag allows output in TOON format for LLM consumption
- Problem: We're not actually using TOON as the fundamental storage format

## Required Work (Phase 2.2)
1. Switch issue file I/O to write TOON format instead of JSONL
   - Update cmd/bdt/storage.go to use EncodeTOON for writing
   - Update cmd/bdt/storage.go to decode TOON (currently decodes JSON)
   - Ensure round-trip: write TOON → read TOON → write TOON is byte-identical

2. Update command implementations
   - cmd/bdt/create.go: Write newly created issues to TOON format
   - cmd/bdt/list.go: Read issues from TOON format
   - cmd/bdt/show.go: Read from TOON format
   - cmd/bdt/import.go: Convert imported JSONL to TOON
   - cmd/bdt/export.go: Export TOON to JSONL (for bd compatibility)

3. Implement TOON parser that handles gotoon's encoder-only limitation
   - Since gotoon doesn't decode TOON, need custom TOON→JSON decoder
   - OR continue storing TOON but decoding via intermediate JSON conversion

4. Git merge driver optimization
   - TOON is line-oriented, better for 3-way merges than binary formats
   - Configure git merge driver for .toon files

5. Comprehensive testing
   - Round-trip tests: Issue → TOON → storage → read → Issue
   - Merge conflict resolution tests with TOON format
   - Large issue set performance tests

## Success Criteria
- issues.toon stores actual TOON format (not JSONL)
- bdt list reads from TOON file
- bdt create writes to TOON file
- Round-trip: create issue → list → show returns identical data
- All 65+ tests still passing
- Performance comparable to JSONL storage


Spawn-time bonding: --attach flag

Add --attach flag to bd mol spawn for on-the-fly composition.

COMMAND: bd mol spawn proto-feature --attach proto-docs --attach proto-testing

BEHAVIOR:
- Spawn the primary proto as normal
- For each --attach: spawn that proto and wire to primary
- Attachments become children of primary's root epic
- Dependencies wired based on bond type (default: sequential)

FLAGS:
- --attach PROTO: Attach a proto (can repeat)
- --attach-type TYPE: sequential (default) or parallel for all attachments
- --after ISSUE: Attachment point for attached protos

VARIABLE HANDLING:
- All attached protos share variable namespace
- Warn on variable name conflicts
- All --var flags apply to all protos

DESIGN NOTE: This is syntactic sugar. Equivalent to:
  bd mol spawn proto-A
  bd mol bond $new_epic_id proto-B

Keeping as separate task because it's a common UX pattern worth optimizing.


Add tests for helper functions (GetDirtyIssueHash, GetAllDependencyRecords, export hashes)

Several utility functions have 0% coverage:
- GetDirtyIssueHash (dirty.go)
- GetAllDependencyRecords (dependencies.go)
- GetExportHash, SetExportHash, ClearAllExportHashes (hash.go)

These are lower priority but should have basic coverage.


Make merge requests ephemeral wisps instead of permanent issues

## Problem

Merge requests (MRs) are currently created as regular beads issues (type: merge-request). This means they:
- Sync to JSONL and propagate via git
- Accumulate in the issue database indefinitely
- Clutter `bd list` output with closed MRs
- Create permanent records for inherently transient artifacts

MRs are process artifacts, not work products. They exist briefly while code awaits merge, then their purpose is fulfilled. The git merge commit and GitHub PR (if applicable) provide the permanent audit trail - the beads MR is redundant.

## Proposed Solution

Make MRs ephemeral wisps that exist only during the merge process:

1. **Create MRs as wisps**: When a polecat completes work and requests merge, create the MR in `.beads-wisp/` instead of `.beads/`

2. **Refinery visibility**: This works because all clones within a rig share the same database:
   ```
   beads/              ← Rig root
   ├── .beads/         ← Permanent issues (synced to JSONL)
   ├── .beads-wisp/    ← Ephemeral wisps (NOT synced)
   ├── crew/dave/      ← Uses rig's shared DB
   ├── polecats/*/     ← Uses rig's shared DB
   └── refinery/       ← Uses rig's shared DB
   ```
   The refinery can see wisp MRs immediately - same SQLite database.

3. **On merge completion**: Burn the wisp (delete without digest). The git merge commit IS the permanent record. No digest needed since:
   - Digest wouldn't be smaller than the MR itself (~200-300 bytes either way)
   - Git history provides complete audit trail
   - GitHub PR (if used) provides discussion/approval record

4. **On merge rejection/abandonment**: Burn the wisp. Optionally notify the source polecat via mail.

## Benefits

- **Clean JSONL**: MRs never pollute the permanent issue history
- **No accumulation**: Wisps are burned on completion, no cleanup needed
- **Correct semantics**: Wisps are for "operational ephemera" - MRs fit perfectly
- **Reduced sync churn**: Fewer JSONL updates, faster `bd sync`
- **Cleaner queries**: `bd list` shows work items, not process artifacts

## Implementation Notes

### Where MRs are created

Currently MRs are created by the witness or polecat when work is ready for merge. This code needs to:
- Set `wisp: true` on the MR issue
- Or use a dedicated wisp creation path

### Refinery changes

The refinery queries for pending MRs to process. It needs to:
- Query wisp storage as well as (or instead of) permanent storage
- Use `bd mol burn` or equivalent to delete processed MRs

### What about cross-rig MRs?

If an MR needs to be visible outside the rig (e.g., external collaborators):
- They would see the GitHub PR anyway
- Or we could create a permanent "merge completed" notification issue
- But this is likely unnecessary - MRs are internal coordination

### Migration

Existing MRs in permanent storage:
- Can be cleaned up with `bd cleanup` or manual deletion
- Or left to age out naturally
- No migration of open MRs needed (they'll complete under old system

## Alternatives Considered

1. **Auto-cleanup of closed MRs**: Keep MRs as permanent issues but auto-delete after 24h. Simpler but still creates sync churn and temporary JSONL pollution.

2. **MRs as mail only**: Polecat sends mail to refinery with merge details, no MR issue at all. Loses queryability (bd-801b [P2] [merge-request] closed - Merge: bd-bqcc
bd-pvu0 [P2] [merge-request] closed - Merge: bd-4opy
bd-i0rx [P2] [merge-request] closed - Merge: bd-ao0s
bd-u0sb [P2] [merge-request] closed - Merge: bd-uqfn
bd-8e0q [P2] [merge-request] closed - Merge: beads-ocs
bd-hvng [P2] [merge-request] closed - Merge: bd-w193
bd-4sfl [P2] [merge-request] closed - Merge: bd-14ie
bd-sumr [P2] [merge-request] closed - Merge: bd-t4sb
bd-3x9o [P2] [merge-request] closed - Merge: bd-by0d
bd-whgv [P2] [merge-request] closed - Merge: bd-401h
bd-f3ll [P2] [merge-request] closed - Merge: bd-ot0w
bd-fmdy [P3] [merge-request] closed - Merge: bd-kzda).

3. **Separate merge queue**: Refinery maintains internal state for pending merges, not in beads at all. Clean but requires new infrastructure.

Wisps are the cleanest solution - they already exist, have the right semantics, and require minimal changes.

## Related

- Wisp architecture:
- Current MR creation: witness/refinery code paths
- bd-pvu0, bd-801b: Example MRs currently in permanent storage
EOF
)


Improve test coverage for internal/export (37.1% → 60%)

The export package has only 37.1% test coverage. Export functionality needs good coverage to ensure data integrity.

Current coverage: 37.1%
Target coverage: 60%


Work on beads-2vn: Add simple built-in beads viewer (GH#6...

Work on beads-2vn: Add simple built-in beads viewer (GH#654). Add bd list --pretty with --watch flag, tree view with priority/status symbols. When done, submit MR (not PR) to integration branch for Refinery.


Merge: bd-49kw

branch: polecat/nux
target: main
source_issue: bd-49kw
rig: beads


Graph Link: duplicates for deduplication

Implement duplicates link type for marking issues as duplicates.

New command:
- bd duplicate <id> --of <canonical> - marks id as duplicate of canonical
- Auto-closes the duplicate issue

Query support:
- bd show <id> shows 'Duplicate of: <canonical>'
- bd list --duplicates shows all duplicate pairs

Storage:
- duplicates column pointing to canonical issue ID

Essential for large issue databases with many similar reports.


Design molecule step hooks

Hooks that fire between molecule steps. When a bead in a molecule closes, trigger hook that can spawn agent attention to prompts/requests. This enables reactive orchestration - the molecule drives, hooks respond. Gas Town feature built on Beads data plane.


Release v0.34.0

Minor version release for beads v0.34.0. This bead serves as my persistent work assignment; the actual release steps are tracked in an attached wisp.


Fix beads-9yc: pinned column missing from schema. gt mail...

Fix beads-9yc: pinned column missing from schema. gt mail send fails because some beads DBs lack the pinned column. Add migration to ensure it exists.


Gate: timer:1m


JSON test issue

Line 1
Line 2
Line 3


Merge: bd-rgyd

branch: polecat/Splitter
target: main
source_issue: bd-rgyd
rig: beads


Improve test coverage for cmd/bd CLI (26.2% → 50%)

The main CLI package (cmd/bd) has only 26.2% test coverage. CLI commands should have at least 50% coverage to ensure reliability.

Key areas with low/no coverage:
- daemon_autostart.go (multiple 0% functions)
- compact.go (several 0% functions)
- Various command handlers

Current coverage: 26.2%
Target coverage: 50%


Add composite index (issue_id, event_type) on events table

GetCloseReason and GetCloseReasonsForIssues filter by both issue_id and event_type.

**Query (queries.go:355-358):**
```sql
SELECT comment FROM events
WHERE issue_id = ? AND event_type = ?
ORDER BY created_at DESC LIMIT 1
```

**Problem:** Currently uses idx_events_issue but must filter event_type in memory.

**Solution:** Add migration:
```sql
CREATE INDEX IF NOT EXISTS idx_events_issue_type ON events(issue_id, event_type);
```

**Priority:** Low - events table is typically small relative to issues.


Replace map[string]interface{} with typed JSON response structs

Many CLI commands use map[string]interface{} for JSON output which loses type safety and compile-time error detection.

Files with map[string]interface{}:
- cmd/bd/compact.go (10+ instances)
- cmd/bd/cleanup.go
- cmd/bd/daemons.go
- cmd/bd/daemon_lifecycle.go

Example fix:
```go
// Before
result := map[string]interface{}{
    "status": "ok",
    "count": 42,
}

// After
type CompactResponse struct {
    Status string `json:"status"`
    Count  int    `json:"count"`
}
result := CompactResponse{Status: "ok", Count: 42}
```

Benefits:
- Compile-time type checking
- IDE autocompletion
- Easier refactoring
- Self-documenting API


Git merge driver uses invalid placeholders (%L, %R instead of %A, %B)

## Problem

The beads git merge driver is configured with invalid Git placeholders:

```
git config merge.beads.driver "bd merge %A %O %L %R"
```

Git doesn't recognize `%L` or `%R` as valid merge driver placeholders. The valid placeholders are:
- `%O` = base (common ancestor)
- `%A` = current version (ours)
- `%B` = other version (theirs)

## Impact

- Affects ALL users when they have `.beads/beads.jsonl` merge conflicts
- Automatic JSONL merge fails with error: "error reading left file: failed to open file: open 7: no such file or directory"
- Users must manually resolve conflicts instead of getting automatic merge

## Root Cause

The `bd init` command (or wherever the merge driver is configured) is using non-standard placeholders. When Git encounters `%L` and `%R`, it either passes them literally or interprets them incorrectly.

## Fix

Update the merge driver configuration to:
```
git config merge.beads.driver "bd merge %A %O %A %B"
```

Where:
- 1st `%A` = output file (current file, will be overwritten)
- `%O` = base (common ancestor)
- 2nd `%A` = left/current version
- `%B` = right/other version

## Action Items

1. Fix `bd init` (or equivalent setup command) to use correct placeholders
2. Add migration/warning for existing users with misconfigured merge driver
3. Update documentation with correct merge driver setup
4. Consider adding validation when `bd init` is run


Migrate sort.Slice to slices.SortFunc

Go 1.21+ provides slices.SortFunc which is cleaner and slightly faster than sort.Slice.

Found 15+ instances of sort.Slice in:
- cmd/bd/autoflush.go
- cmd/bd/count.go
- cmd/bd/daemon_sync.go
- cmd/bd/doctor.go
- cmd/bd/export.go
- cmd/bd/import.go
- cmd/bd/integrity.go
- cmd/bd/jira.go
- cmd/bd/list.go
- cmd/bd/migrate_hash_ids.go
- cmd/bd/rename_prefix.go
- cmd/bd/show.go

Example migration:
```go
// Before
sort.Slice(issues, func(i, j int) bool {
    return issues[i].Priority < issues[j].Priority
})

// After
slices.SortFunc(issues, func(a, b *types.Issue) int {
    return cmp.Compare(a.Priority, b.Priority)
})
```

Benefits:
- Cleaner 3-way comparison
- Slightly better performance
- Modern idiomatic Go


Merge: bd-dtl8

branch: polecat/dag
target: main
source_issue: bd-dtl8
rig: beads


Release v0.33.2

Version bump workflow for beads release 0.33.2.

## Variables
- `0.33.2` - The new version number (e.g., 0.31.0)
- `2025-12-21` - Release date (YYYY-MM-DD format)

## Workflow Steps
1. Kill running daemons
2. Run tests and linting
3. Bump version in all files (10 files total)
4. Update cmd/bd/info.go with release notes
5. Commit and push version bump
6. Create and push git tag
7. Update Homebrew formula
8. Upgrade local Homebrew installation
9. Verify installation

## Files Updated by bump-version.sh
- cmd/bd/version.go
- .claude-plugin/plugin.json
- .claude-plugin/marketplace.json
- integrations/beads-mcp/pyproject.toml
- integrations/beads-mcp/src/beads_mcp/__init__.py
- README.md
- npm-package/package.json
- cmd/bd/templates/hooks/* (4 files)
- CHANGELOG.md

## Manual Step Required
- cmd/bd/info.go - Add versionChanges entry with release notes


Implement conditional bond type for mol bond

The mol bond command accepts 'conditional' as a bond type but doesn't implement any conditional-specific behavior. It currently behaves identically to 'parallel'.

**Expected behavior:**
Conditional bonds should mean 'B runs only if A fails' per the help text (mol.go:318).

**Implementation needed:**
- Add failure-condition dependency handling
- Possibly new dependency type or status-based blocking
- Update bondProtoProto, bondProtoMol, bondMolMol to handle conditional

**Alternative:**
Remove 'conditional' from valid bond types until implemented.

This is new functionality, not a regression.


Version Bump: 0.30.7

Release checklist for version 0.30.7. This molecule ensures all release steps are completed properly.


Implement await type handlers (gh:run, gh:pr, timer, human, mail)

Implement condition checking for each await type.

## Handlers Needed
- gh:run:<id> - Check GitHub Actions run status via gh CLI
- gh:pr:<id> - Check PR merged/closed status via gh CLI
- timer:<duration> - Simple elapsed time check
- human:<prompt> - Check for human approval (via mail?)
- mail:<pattern> - Check for mail matching pattern

## Implementation Location
This is Deacon logic, so likely in Gas Town (gt) not beads.

## Interface
```go
type AwaitHandler interface {
    Check(awaitID string) (completed bool, result string, err error)
}
```


Add integration tests for bd reset command

End-to-end integration tests for the reset command.

## Test Scenarios

### Basic reset
1. Init beads, create some issues
2. Run bd reset --force
3. Verify .beads/ is fresh, issues gone

### Hard reset
1. Init beads, create issues, commit
2. Run bd reset --hard --force
3. Verify git history has reset commits

### Backup functionality
1. Init beads, create issues
2. Run bd reset --backup --force
3. Verify backup exists with correct contents
4. Verify main .beads/ is reset

### Dry run
1. Init beads, create issues
2. Run bd reset --dry-run
3. Verify nothing changed

### Confirmation prompt
1. Init beads
2. Run bd reset (no --force)
3. Verify prompts for confirmation
4. Test both y and n responses

## Location
tests/integration/reset_test.go or similar


Merge: bd-au0.5

branch: polecat/Searcher
target: main
source_issue: bd-au0.5
rig: beads


Cleanup: --ephemeral flag

Update bd cleanup to handle ephemeral issues.

New flag:
- bd cleanup --ephemeral - deletes all CLOSED issues with ephemeral=true

Behavior:
- Only deletes if status=closed AND ephemeral=true
- Respects --dry-run flag
- Reports count of deleted ephemeral issues

This allows swarm cleanup to remove transient messages without affecting permanent issues.


Add unit tests for reset package

Comprehensive unit tests for internal/reset package.

## Test Cases

### ValidateState tests
- .beads/ exists → success
- .beads/ missing → appropriate error
- git dirty state detection

### CountImpact tests
- Empty .beads/ → zero counts
- With issues → correct count (open vs closed)
- With tombstones → correct count
- Returns HasUncommitted correctly

### Backup tests
- Creates backup with correct timestamp format
- Preserves all files and permissions
- Returns correct path
- Handles missing .beads/ gracefully
- Errors on pre-existing backup dir

### Git operation tests
- CheckGitState detects dirty, detached, not-a-repo
- GitRemoveBeads removes correct files
- GitCommitReset creates commit with message
- Operations skip gracefully when not in git repo

### Reset tests (with mocks/temp dirs)
- Soft reset removes files, calls init
- Hard reset includes git operations
- Dry run doesn't modify anything
- SkipInit flag prevents re-initialization
- Daemon killall is called
- Backup is created when requested

## Approach
- Can start with interface definitions (TDD style)
- Use testify for assertions
- Create temp directories for isolation
- Mock git operations where needed
- Test completion depends on implementation tasks

## File Location
`internal/reset/reset_test.go`
`internal/reset/backup_test.go`
`internal/reset/git_test.go`


Re: Thread Test 2

Great! Thread is working well.


Wisp storage: ephemeral molecule tracking

Implement ephemeral molecule storage for patrol cycles.

## Architecture

Wisps are ephemeral molecules stored in `.beads-wisps/` (gitignored).
When squashed, they create digests in permanent `.beads/`.

**Storage is per-rig, not per-role**: Witness and Refinery share mayor/rig's
`.beads-wisps/` since they execute from that context.

## Design Doc
See: gastown/mayor/rig/docs/wisp-architecture.md

## Key Requirements

1. **Ephemeral storage**: `.beads-wisps/` directory, gitignored
2. **Bond with --wisp**: Creates in wisps instead of permanent
3. **Squash**: Deletes wisp, creates digest in permanent beads
4. **Burn**: Deletes wisp, no digest
5. **Wisp commands**: `bd wisp list`, `bd wisp gc`

## Storage Locations

| Context | Location |
|---------|----------|
| Rig (Deacon, Witness, Refinery) | mayor/rig/.beads-wisps/ |
| Polecat (if used) | polecats/<name>/.beads-wisps/ |

## Children (to be created)
- bd mol bond --wisp flag
- .beads-wisps/ storage backend
- bd mol squash handles wisp to permanent
- bd wisp list command
- bd wisp gc command (orphan cleanup)


Sync race: rebase-based divergence recovery resurrects tombstones

## Problem
When two repos sync simultaneously, tombstones can be resurrected:

1. Repo A deletes issue (creates tombstone), pushes to sync branch
2. Repo B (with 'closed' status) exports and tries to push
3. Push fails (non-fast-forward)
4. fetchAndRebaseInWorktree does git rebase
5. Git rebase applies B's 'closed' patch on top of A's 'tombstone'
6. TEXT-level rebase doesn't invoke beads merge driver
7. 'closed' overwrites 'tombstone' = resurrection

## Root Cause
CommitToSyncBranch uses git rebase for divergence recovery, but rebase is text-level, not content-level. The proper content-level merge in PullFromSyncBranch handles tombstones correctly, but it runs AFTER the problematic push.

## Proposed Fix
Option 1: Don't push in CommitToSyncBranch - let PullFromSyncBranch handle merge+push
Option 2: Replace git rebase with content-level merge in fetchAndRebaseInWorktree
Option 3: Reorder sync steps: Export → Pull/Merge → Commit → Push

## Workaround Applied
Excluded tombstones from orphan detection warnings (commit 1e97d9cc).

See also: bd-3852 (Add orphan detection migration)


Swarm: 13 beads backlog issues for polecat execution

## Swarm Overview

13 issues prepared for parallel polecat execution. All issues have been enhanced with concrete implementation guidance, file lists, and success criteria.

## Issue List

### Bug (1) - HIGH PRIORITY
| ID | Priority | Title |
|----|----------|-------|
| bd-phtv | P1 | Pinned field overwritten by subsequent commands |

### Test Coverage (3)
| ID | Package | Target |
|----|---------|--------|
| bd-io8c | internal/syncbranch | 27% → 70% |
| bd-thgk | internal/compact | 17% → 70% |
| bd-tvu3 | internal/beads | 48% → 70% |

### Code Quality (3)
| ID | Task |
|----|------|
| bd-qioh | FatalError pattern standardization |
| bd-rgyd | Split queries.go (1704 lines → 5 files) |
| bd-u2sc.3 | Split cmd/bd files (sync/init/show/compact) |

### Features (4)
| ID | Task |
|----|------|
| bd-au0.5 | Search date/priority filters |
| bd-ykd9 | Doctor --fix auto-repair |
| bd-g4b4 | Close hooks system |
| bd-likt | Gate daemon RPC |

### Polish (2)
| ID | Task |
|----|------|
| bd-4qfb | Doctor output formatting |
| bd-u2sc.4 | slog structured logging |

## Issue Details

All issues have been enhanced with:
- Concrete file lists to modify
- Code snippets and patterns
- Success criteria
- Test commands

Run `bd show <id>` for full details on any issue.

## Execution Notes

- All issues are independent (no blockers between them)
- bd-phtv (P1 bug) should get priority - affects bd pin functionality
- Test coverage tasks are straightforward but time-consuming
- File split tasks (bd-rgyd, bd-u2sc.3) are mechanical but important

## Completed During Prep

- bd-ucgz (P2 bug) - Fixed inline: external deps orphan check (commit f2db0a1d)
- Moved 5 gastown issues out of beads backlog (gt-dh65, gt-ng6g, gt-fqcz, gt-gswn, gt-rw2z)
- Deferred 4 premature/post-1.0 issues
- Closed bd-udsi epic (core implementation complete)


Fix TestRunSync_Timeout failing on macOS

The hooks timeout test fails because exec.CommandContext doesn't properly terminate child processes of shell scripts on macOS. The test creates a hook that runs 'sleep 60' with a 500ms timeout, but it waits the full 60 seconds.

Options to fix:
- Use SysProcAttr{Setpgid: true} to create process group and kill the group
- Skip test on darwin with build tag
- Use a different approach for timeout testing

Location: internal/hooks/hooks_test.go:220-253


Merge: bd-n386

branch: polecat/immortan
target: main
source_issue: bd-n386
rig: beads


Code review findings: mol squash deletion bypasses tombstones


Respond to GitHub issue #479 with solution

Once bd reset is implemented and released, respond to GitHub issue #479.

## Response should include
- Announce the new bd reset command
- Show basic usage examples
- Link to any documentation
- Thank the user for the feedback

## Example response
```
Thanks for raising this! We've added a `bd reset` command to handle this case.

Usage:
- `bd reset` - Reset to clean state (prompts for confirmation)
- `bd reset --backup` - Create backup first
- `bd reset --hard` - Also clean up git history

This is available in version X.Y.Z.
```

## Notes
- Wait until feature is merged and released
- Consider if issue should be closed or left for user confirmation


Merge: bd-l13p

branch: polecat/nux
target: main
source_issue: bd-l13p
rig: beads


HANDOFF: Molecule bonding - spawn done, bond next

## Context

Continuing work on bd-o5xe (Molecule bonding epic).

## Completed This Session

- bd-mh4w: Renamed bond to spawn in mol.go
- bd-rnnr: Added BondRef data model to types.go

## Now Unblocked

1. bd-o91r: Polymorphic bond command [P1]
2. bd-iw4z: Compound visualization [P2]
3. bd-iq19: Distill command [P2]

## Key Files

- cmd/bd/mol.go
- internal/types/types.go

## Next Step

Start with bd-o91r. Run bd show bd-o5xe for context.


Rename 'template instantiate' to 'mol bond'

Rename the template instantiation command to match molecule metaphor.

Current: bd template instantiate <id> --var key=value
Target:  bd mol bond <id> --var key=value

Changes needed:
- Add 'mol' command group (or extend existing)
- Add 'bond' subcommand that wraps template instantiate logic
- Keep 'template instantiate' as deprecated alias for backward compat
- Update help text and docs to use molecule terminology

The 'bond' verb captures:
1. Chemistry metaphor (molecules bond to form structures)
2. Dependency linking (child issues bonded in a DAG)
3. Short and active

See also: molecule execution model in Gas Town


Clean up orphaned child issues (bd-cb64c226.*, bd-cbed9619.*)

## Problem

Every bd command shows warnings about 12 orphaned child issues:
- bd-cb64c226.1, .6, .8, .9, .10, .12, .13
- bd-cbed9619.1, .2, .3, .4, .5

These are hierarchical IDs (parent.child format) where the parent issues no longer exist.

## Impact

- Clutters output of every bd command
- Confusing for users
- Indicates incomplete cleanup of deleted parent issues

## Proposed Solution

1. Delete the orphaned issues since their parents no longer exist:
   ```bash
   bd delete bd-cb64c226.1 bd-cb64c226.6 bd-cb64c226.8 ...
   ```

2. Or convert them to top-level issues if they contain useful content

## Investigation Needed

- What were the parent issues bd-cb64c226 and bd-cbed9619?
- Why were they deleted without their children?
- Should bd delete cascade to children automatically?


Fix or remove TestFindJSONLPathDefault (issue #356)

Code health review found .test-skip permanently skips TestFindJSONLPathDefault.

The test references issue #356 about wrong JSONL filename expectations (issues.jsonl vs beads.jsonl).

Test file: internal/beads/beads_test.go

The underlying migration from beads.jsonl to issues.jsonl may be complete, so either:
1. Fix the test expectations
2. Remove the test if no longer needed
3. Document why it remains skipped


Split monolithic sqlite.go into focused files

internal/storage/sqlite/sqlite.go is 1050 lines containing initialization, 20+ CRUD methods, query building, and schema management.

Split into:
- store.go: Store struct & initialization (150 lines)
- bead_queries.go: Bead CRUD (300 lines)
- work_queries.go: Work queries (200 lines)
- stats_queries.go: Statistics (150 lines)
- schema.go: Schema & migrations (150 lines)
- helpers.go: Common utilities (100 lines)

Impact: Impossible to understand at a glance; hard to find specific functionality; high cognitive load

Effort: 6-8 hours


Consider backwards compatibility for ready() and list() return type change

PR #481 changed the return types of `ready()` and `list()` from `list[Issue]` to `list[IssueMinimal] | CompactedResult`. This is a breaking change for MCP clients.

## Impact Assessment
Breaking change affects:
- Any MCP client expecting `list[Issue]` from ready()
- Any MCP client expecting `list[Issue]` from list()
- Client code that accesses full Issue fields (description, design, acceptance_criteria, timestamps, dependencies, dependents)

## Current Behavior
- ready() returns `list[IssueMinimal] | CompactedResult`
- list() returns `list[IssueMinimal] | CompactedResult`
- show() still returns full `Issue` (good)

## Considerations
**Pros of current approach:**
- Forces clients to use show() for full details (good for context efficiency)
- Simple mental model (always use show for full data)
- Documentation warns about this

**Cons:**
- Clients expecting list[Issue] will break
- No graceful degradation option
- No migration period

## Potential Solutions
1. Add optional parameter `full_details=false` to ready/list (would increase payload)
2. Create separate tools: ready_minimal/list_minimal + ready_full/list_full
3. Accept breaking change and document upgrade path (current approach)
4. Version the MCP server and document migration guide

## Recommendation
Current approach (solution 3) is reasonable if:
- Changelog clearly documents the breaking change
- Migration guide provided to clients
- Error handling is graceful for clients expecting specific fields


Test message

Hello world


GH#403: bd doctor --fix circular error message

bd doctor --fix suggests running bd doctor --fix for deletions manifest issue. Fix to provide actual resolution. See GitHub issue #403.


Restart running daemons

Kill and restart any running bd daemons to pick up new version: pkill -f 'bd daemon' && bd daemon --start


GH#405: Fix prefix parsing with hyphens - multi-hyphen prefixes parsed incorrectly

Fixed: ExtractIssuePrefix was falling back to first-hyphen for word-like suffixes, breaking multi-hyphen prefixes like 'hacker-news' and 'me-py-toolkit'.


Merge: bd-likt

branch: polecat/Gater
target: main
source_issue: bd-likt
rig: beads


Update Homebrew formula

Update the Homebrew tap with new version:

```bash
./scripts/update-homebrew.sh {{version}}
```

This script waits for GitHub Actions to complete (~5 min), then updates the formula with new SHA256 hashes.

After running, verify the formula with:

```bash
brew info steveyegge/beads/bd
```


Kill running daemons

Stop all bd daemons before release:

```bash
pkill -f 'bd.*daemon' || true
sleep 1
pgrep -lf 'bd.*daemon'  # Should show nothing
```


gt spawn/crew setup should create .beads/redirect for worktrees

Crew clones and polecats need a .beads/redirect file pointing to the shared beads database (../../mayor/rig/.beads). Currently:

- redirect files can get deleted by git clean
- not auto-created during gt spawn or worktree setup
- missing redirects cause 'no beads database found' errors

Found missing in: gastown/joe, beads/zoey (after git clean)

Fix options:
1. gt spawn creates redirect during worktree setup
2. gt prime regenerates missing redirects
3. bd commands auto-detect worktree and find shared beads

This should be standard Gas Town rig configuration.