Audit Current Cache Usage

**Summary:** Comprehensive audit of storage cache usage revealed minimal dependency across server components, with most calls following a consistent pattern. Investigation confirmed cache was largely unnecessary in single-repository daemon architecture.

**Key Decisions:**
- Remove all cache-related environment variables
- Delete server struct cache management fields
- Eliminate cache-specific test files
- Deprecate req.Cwd routing logic

**Resolution:** Cache system will be completely removed, simplifying server storage access and reducing unnecessary complexity with negligible performance impact.

AUDIT COMPLETE

getStorageForRequest() callers: 17 production + 11 test
- server_issues_epics.go: 8 calls
- server_labels_deps_comments.go: 4 calls
- server_export_import_auto.go: 2 calls
- server_compact.go: 2 calls
- server_routing_validation_diagnostics.go: 1 call
- server_eviction_test.go: 11 calls (DELETE entire file)

Pattern everywhere: store, err := s.getStorageForRequest(req) → store := s.storage

req.Cwd usage: Only for multi-repo routing. Local daemon always serves 1 repo, so routing is unused.

MCP server: Uses separate daemons per repo (no req.Cwd usage found). NOT affected by cache removal.

Cache env vars to deprecate:
- BEADS_DAEMON_MAX_CACHE_SIZE (used in server_core.go:63)
- BEADS_DAEMON_CACHE_TTL (used in server_core.go:72)
- BEADS_DAEMON_MEMORY_THRESHOLD_MB (used in server_cache_storage.go:47)

Server struct fields to remove:
- storageCache, cacheMu, maxCacheSize, cacheTTL, cleanupTicker, cacheHits, cacheMisses

Tests to delete:
- server_eviction_test.go (entire file - 9 tests)
- limits_test.go cache assertions

Special consideration: ValidateDatabase endpoint uses findDatabaseForCwd() outside cache. Verify if used, then remove or inline.

Safe to proceed with removal - cache always had 1 entry in local daemon model.


Update CHANGELOG.md with release notes

Add meaningful release notes to CHANGELOG.md describing what changed in 0.30.7


Support redirect files in .beads/ directory

Gas Town creates polecat worktrees with .beads/redirect files that point to a shared beads database. The bd CLI should:

1. When finding a .beads/ directory, check if it contains a 'redirect' file
2. If redirect exists, read the relative path and use that as the beads directory
3. This allows multiple git worktrees to share a single beads database

Example:
- polecats/alpha/.beads/redirect contains '../../mayor/rig/.beads'
- bd commands from alpha should use mayor/rig/.beads

Currently bd ignores redirect files and either uses the local .beads/ or walks up to find a parent .beads/.

Related: gt-nriy (test message that can't be retrieved due to missing redirect support)


Audit and fix JSONL filename mismatches across all repo clones

## Problem

Multiple clones of repos are configured with different JSONL filenames (issues.jsonl vs beads.jsonl), causing:
1. JSONL files to be resurrected after deletion (one clone pushes issues.jsonl, another pushes beads.jsonl)
2. Agents unable to see issues filed by other agents after sync
3. Merge conflicts and data inconsistencies

## Root Cause

When repos were "bd doctored" or initialized at different times, some got issues.jsonl (old default) and others got beads.jsonl (Beads repo specific). These clones push their respective files, creating duplicates.

## Task

Scan all repo clones under ~/src/ (1-2 levels deep) and standardize their JSONL configuration.

### Step 1: Find all beads-enabled repos

```bash
# Find all directories named 'beads' at levels 1-2 under ~/src/
find ~/src -maxdepth 2 -type d -name beads
```

### Step 2: For each repo found, check configuration

For each directory from Step 1, check:
- Does `.beads/metadata.json` exist?
- What is the `jsonl_export` value?
- What JSONL files actually exist in `.beads/`?
- Are there multiple JSONL files (problem!)?

### Step 3: Create audit report

Generate a report showing:
```
Repo Path                           | Config        | Actual Files           | Status
----------------------------------- | ------------- | ---------------------- | --------
~/src/beads                         | beads.jsonl   | beads.jsonl            | OK
~/src/dave/beads                    | issues.jsonl  | issues.jsonl           | MISMATCH
~/src/emma/beads                    | issues.jsonl  | issues.jsonl, beads.jsonl | DUPLICATE!
```

### Step 4: Determine canonical name for each repo

For repos that are the SAME git repository (check `git remote -v`):
- Group them together
- Determine which JSONL filename should be canonical (majority wins, or beads.jsonl for the beads repo itself)
- List which clones need to be updated

### Step 5: Generate fix script

Create a script that for each mismatched clone:
1. Updates `.beads/metadata.json` to use the canonical name
2. If JSONL file needs renaming: `git mv .beads/old.jsonl .beads/new.jsonl`
3. Removes any duplicate JSONL files: `git rm .beads/duplicate.jsonl`
4. Commits the change
5. Syncs: `bd sync`

### Expected Output

1. Audit report showing all repos and their config status
2. List of repos grouped by git remote (same repository)
3. Fix script or manual instructions for standardizing each repo
4. Verification that after fixes, all clones of the same repo use the same JSONL filename

### Edge Cases

- Handle repos without metadata.json (use default discovery)
- Handle repos with no git remote (standalone/local)
- Handle repos that are not git repositories
- Don't modify repos with uncommitted changes (warn instead)

### Success Criteria

- All clones of the same git repository use the same JSONL filename
- No duplicate JSONL files in any repo
- All configurations documented in metadata.json
- bd doctor passes on all repos


Centralize error handling patterns in storage layer

80+ instances of inconsistent error handling across sqlite.go with mix of %w, %v, and no wrapping.

Location: internal/storage/sqlite/sqlite.go (throughout)

Problem:
- Some use fmt.Errorf("op failed: %w", err) - correct wrapping
- Some use fmt.Errorf("op failed: %v", err) - loses error chain
- Some return err directly - no context
- Hard to debug production issues
- Can't distinguish error types

Solution: Create internal/storage/sqlite/errors.go:
- Define sentinel errors (ErrNotFound, ErrInvalidID, etc.)
- Create wrapDBError(op string, err error) helper
- Convert sql.ErrNoRows to ErrNotFound
- Always wrap with operation context

Impact: Lost error context; inconsistent messages; hard to debug

Effort: 5-7 hours


bd find-duplicates - AI-powered duplicate detection

Find semantically duplicate issues.

Approaches:
1. Mechanical: Exact title/description matching
2. Embeddings: Cosine similarity (cheap, scalable)
3. AI: LLM-based semantic comparison (expensive, accurate)

Uses embeddings by default for >100 issues.

Files: cmd/bd/find_duplicates.go (new)


Thread Test 2

Testing direct mode


Fix daemon/direct mode inconsistency in relate and duplicate commands

The relate.go and duplicate.go commands have inconsistent daemon/direct mode handling:

When daemonClient is connected, they resolve IDs via RPC but then perform updates directly via store.UpdateIssue(), bypassing the daemon.

Affected locations:
- relate.go:125-139 (runRelate update)
- relate.go:235-246 (runUnrelate update)
- duplicate.go:120 (runDuplicate update)
- duplicate.go:207 (runSupersede update)

Should either use RPC for updates when daemon is running, or document why direct access is intentional.


GH#540: Add silent quick-capture mode (bd q)

Add bd q alias for quick capture that outputs only issue ID. Useful for piping/scripting. See GitHub issue #540.


getLocalSyncBranch silently ignores YAML parse errors

In autoimport.go:170-172, YAML parsing errors are silently ignored. If a user has malformed YAML in config.yaml, sync-branch will just silently be empty with no feedback.

Recommendation: Add debug logging since this function is only called during auto-import, and debugging silent failures is painful.

Add: debug.Logf("Warning: failed to parse config.yaml: %v", err)


GH#519: bd sync fails when sync.branch is currently checked-out branch

bd sync tries to create worktree for sync.branch even when already on that branch. Should commit directly instead. See GitHub issue #519.


Split large cmd/bd files: doctor.go (2948 lines), sync.go (2121 lines)

Code health review found several oversized files:

1. doctor.go - 2948 lines, 48 functions mixed together
   - Should split into doctor/checks/*.go for individual diagnostics
   - applyFixes() and previewFixes() are nearly identical

2. sync.go - 2121 lines
   - ZFC (Zero Flush Check) logic embedded inline (lines 213-247)
   - Multiple mode handlers should be extracted

3. init.go - 1732 lines
4. compact.go - 1097 lines
5. show.go - 1069 lines

Recommendation: Extract into focused sub-packages or split into logical files.


GH#518: Document bd setup command

bd setup is undiscoverable. Add to README/docs. Currently only findable by grepping source. See GitHub issue #518.


Code Review: PR #481 - Context Engineering Optimizations

Comprehensive code review of the merged context engineering PR (PR #481) that reduces MCP context usage by 80-90%.

## Summary
The PR successfully implements lazy tool schema loading and minimal issue models to reduce context window usage. Overall implementation is solid and well-tested.

## Positive Findings
✅ Well-designed models (IssueMinimal, CompactedResult)
✅ Comprehensive test coverage (28 tests, all passing)
✅ Clear documentation and comments
✅ Backward compatibility preserved (show() still returns full Issue)
✅ Sensible defaults (COMPACTION_THRESHOLD=20, PREVIEW_COUNT=5)
✅ Tool catalog complete with all 15 tools documented

## Issues Identified
See linked issues for specific followup tasks.

## Context Engineering Architecture
- discover_tools(): List tool names only (~500 bytes vs ~15KB)
- get_tool_info(name): Get specific tool details on-demand
- IssueMinimal: Lightweight model for list views (~80 bytes vs ~400 bytes)
- CompactedResult: Auto-compacts results with >20 issues
- _to_minimal(): Conversion function (efficient, no N+1 issues)


Deleted issues resurrect during bd sync (tombstones not propagating)

## Problem

When issues are deleted with bd delete --force, they get deleted from the local DB but resurrect during the next bd sync.

## Reproduction

1. Observe orphan warnings (bd-cb64c226.*, bd-cbed9619.*)
2. Delete them: bd delete bd-cb64c226.1 ... --force
3. Run bd sync
4. Orphan warnings reappear - issues were resurrected!

## Root Cause Hypothesis

The sync branch workflow (beads-sync) has the old state before deletions. When bd sync pulls from beads-sync and copies JSONL to main, the deleted issues are re-imported.

Tombstones may not be properly:
1. Written to beads-sync during export
2. Propagated during pull/merge
3. Honored during import

## Related

- bd-7b7h: chicken-and-egg sync.branch bug (same workflow)
- bd-ncwo: ID-based fallback matching to prevent ghost resurrection

## Files to Investigate

- cmd/bd/sync.go (export/import flow)
- internal/syncbranch/worktree.go (PullFromSyncBranch, copyJSONLToMainRepo)
- internal/importer/ (tombstone handling)


Test body-file

This is a test description from a file.

It has multiple lines.


Re: Thread Test 2

Great! Thread is working well.


Review and document rarely-used commands

Document use cases or consider deprecation for infrequently-used commands.

**Commands to review:**
1. bd rename-prefix - How often is this used? Document use cases
2. bd detect-pollution - Consider integrating into bd validate
3. bd migrate-hash-ids - One-time migration, keep but document as legacy

**For each command:**
- Document typical use cases
- Add examples to help text
- Consider if it should be a subcommand instead
- Add deprecation warning if appropriate

**Not changing:**
- duplicates ✓ (useful for data quality)
- repair-deps ✓ (useful for fixing broken refs)
- restore ✓ (critical for compacted issues)
- compact ✓ (performance feature)

**Deliverable:**
- Updated help text
- Documentation in ADVANCED.md
- Deprecation plan if needed


Merge3Way public API does not expose TTL parameter

The public Merge3Way() function in merge.go does not allow callers to configure the tombstone TTL. It hard-codes the default via merge3WayWithTTL(). While merge3WayWithTTL() exists, it is unexported (lowercase). This means the CLI and tests cannot configure TTL at merge time. Use cases: testing with different TTL values, per-repository TTL configuration, debugging with short TTL, supporting --ttl flag in bd merge command (mentioned in design doc bd-zvg). Recommendation: Export Merge3WayWithTTL (rename to uppercase). Files: internal/merge/merge.go:77, 292-298


Add bd daemon --stop-all command to kill all daemon processes

Currently there's no easy way to stop all running bd daemon processes. Users must resort to pkill -f 'bd daemon' or similar shell commands.

Add a --stop-all flag to bd daemon that:
1. Finds all running bd daemon processes (not just the current repo's daemon)
2. Gracefully stops them all
3. Reports how many were stopped

This is useful when:
- Multiple daemons are running and causing race conditions
- User wants a clean slate before running bd sync
- Debugging daemon-related issues


Edge Schema Consolidation: Unify all edges in dependencies table

Consolidate all edge types into the dependency table per decision 004.

## Changes
- Add metadata column to dependencies table
- Add thread_id column for conversation grouping
- Remove redundant Issue fields: replies_to, relates_to, duplicate_of, superseded_by
- Update all code to use dependencies API
- Migration script for existing data
- JSONL format change (breaking)

Reference: ~/gt/hop/decisions/004-edge-schema-consolidation.md


Thread Test

Testing the thread feature


GH#444: Fix inconsistent status naming in_progress vs in-progress

Documentation uses in-progress (hyphen) but code expects in_progress (underscore). Update all docs to use canonical in_progress. See GitHub issue #444.


test hash length


Push commit and tag to origin

```bash
git push origin main
git push origin v0.30.4
```

This triggers GitHub Actions:
- GoReleaser build
- PyPI publish
- npm publish

```verify
git ls-remote origin refs/tags/v0.30.4 | grep -q 'v0.30.4'
```


Delete server_cache_storage.go

Remove the entire cache implementation file (~286 lines)


Implement content-first idempotent import

**Summary:** Refactored issue import to be content-first and idempotent, ensuring consistent data synchronization across multiple import rounds by prioritizing content hash matching over ID-based updates.

**Key Decisions:**
- Implement content hash as primary matching mechanism
- Create global collision resolution algorithm
- Ensure importing same data multiple times results in no-op

**Resolution:** The new import strategy guarantees predictable convergence across distributed systems, solving rename detection and collision handling while maintaining data integrity during multi-stage imports.


sync branch not match config

./bd sync
→ Exporting pending changes to JSONL...
→ No changes to commit
→ Pulling from sync branch 'gh-386'...
Error pulling from sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/worktree-db-fail/.git: not a directory
matt@blufin-framation ~/d/b/worktree-db-fail (worktree-db-fail) [1]> bd config list

Configuration:
  auto_compact_enabled = false
  compact_batch_size = 50
  compact_model = claude-3-5-haiku-20241022
  compact_parallel_workers = 5
  compact_tier1_days = 30
  compact_tier1_dep_levels = 2
  compact_tier2_commits = 100
  compact_tier2_days = 90
  compact_tier2_dep_levels = 5
  compaction_enabled = false
  issue_prefix = worktree-db-fail
  sync.branch = worktree-db-fail


bd template commands fail with daemon mode

The `bd template show` and `bd template instantiate` commands fail with 'Error loading template: no database connection' when daemon is running.

**Reproduction:**
```bash
bd daemon --start
bd template show bd-qqc  # Error: no database connection
bd template show bd-qqc --no-daemon  # Works
```

**Expected:** Template commands should work with daemon like other commands.

**Workaround:** Use `--no-daemon` flag.

**Location:** Likely in cmd/bd/template.go - daemon RPC path not implemented for template operations.


No logging/debugging for tombstone resurrection events

Per the design document bd-zvg Open Question 1: Should resurrection log a warning? Recommendation was Yes. Currently, when an expired tombstone loses to a live issue (resurrection), there is no logging or debugging output. This makes it hard to understand why an issue reappeared. Recommendation: Add optional debug logging when resurrection occurs, e.g., Issue bd-abc resurrected (tombstone expired). Files: internal/merge/merge.go:359-366, 371-378, 400-405, 410-415


Verify MCP Server Compatibility

Ensure MCP server works with cache-free daemon


Design contributor namespace isolation for beads pollution prevention

## Problem

When contributors work on beads-the-project using beads-the-tool, their personal work-tracking issues leak into PRs. The .beads/issues.jsonl is intentionally tracked (it's the project's issue database), but contributors' local issues pollute the diff.

This is a recursion problem unique to self-hosting projects.

## Possible Solutions to Explore

1. **Contributor namespaces** - Each contributor gets a private prefix (e.g., `bd-steve-xxxx`) that's gitignored or filtered
2. **Separate database** - Contributors use BEADS_DIR pointing elsewhere for personal tracking
3. **Issue ownership/visibility flags** - Mark issues as "local-only" vs "project"
4. **Prefix-based filtering** - Configure which prefixes are committed vs ignored

## Design Considerations

- Should be zero-friction for contributors (no manual setup)
- Must not break existing workflows
- Needs to work with sync/collaboration features
- Consider: what if a "personal" issue graduates to "project" issue?

## Expansion Needed

This is a placeholder. Needs detailed design exploration before implementation.


bd doctor should recommend bd prime migration for existing repos

bd doctor should detect old beads integration patterns and recommend migrating to bd prime approach.

## Current behavior
- bd doctor checks if Claude hooks are installed globally
- Doesn't check project-level integration (AGENTS.md, CLAUDE.md)
- Doesn't recommend migration for repos using old patterns

## Desired behavior
bd doctor should detect and suggest:

1. **Old slash command pattern detected**
   - Check for /beads:* references in AGENTS.md, CLAUDE.md
   - Suggest: These slash commands are deprecated, use bd prime hooks instead

2. **No agent documentation**
   - Check if AGENTS.md or CLAUDE.md exists
   - Suggest: Run 'bd onboard' or 'bd setup claude' to document workflow

3. **Old MCP-only pattern**
   - Check for instructions to use MCP tools but no bd prime hooks
   - Suggest: Add bd prime hooks for better token efficiency

4. **Migration path**
   - Show: 'Run bd setup claude to add SessionStart/PreCompact hooks'
   - Show: 'Update AGENTS.md to reference bd prime instead of slash commands'

## Example output

⚠ Warning: Old beads integration detected in CLAUDE.md
  Found: /beads:* slash command references (deprecated)
  Recommend: Migrate to bd prime hooks for better token efficiency
  Fix: Run 'bd setup claude' and update CLAUDE.md

💡 Tip: bd prime + hooks reduces token usage by 80-99% vs slash commands
  MCP mode: ~50 tokens vs ~10.5k for full MCP scan
  CLI mode: ~1-2k tokens with automatic context recovery

## Benefits
- Helps existing repos adopt new best practices
- Clear migration path for users
- Better token efficiency messaging


Pinned issues: persistent context markers

Add ability to pin issues so they remain visible and are excluded from work-finding commands. Pinned issues serve as persistent context markers (handoffs, architectural notes, recovery instructions) that should not be claimed as work items.

Use Cases:
1. Handoff messages - Pin session handoffs so new agents always see them
2. Architecture decisions - Pin ADRs or design notes for reference
3. Recovery context - Pin amnesia-cure notes that help agents orient

Core commands: bd pin, bd unpin, bd list --pinned/--no-pinned


Add content-addressable identity to Issue type

**Summary:** Added content-addressable identity to Issue type by implementing a ContentHash field that generates a unique SHA256 fingerprint based on semantic issue content. This resolves issue identification challenges when multiple system instances create issues with identical IDs but different contents.

**Key Decisions:**
- Use SHA256 for content hashing
- Hash excludes ID and timestamps
- Compute hash automatically at creation/import time
- Add database column for hash storage

**Resolution:** Successfully implemented a deterministic content hashing mechanism that enables reliable issue identification across distributed systems, improving data integrity and collision detection.


Work on beads-ldv: Fix bd graph crashes with nil pointer ...

Work on beads-ldv: Fix bd graph crashes with nil pointer dereference (GH#657). Fix nil pointer in computeDependencyCounts at graph.go:428. When done, submit MR (not PR) to integration branch for Refinery.


Graph Link: duplicates for deduplication

Implement duplicates link type for marking issues as duplicates.

New command:
- bd duplicate <id> --of <canonical> - marks id as duplicate of canonical
- Auto-closes the duplicate issue

Query support:
- bd show <id> shows 'Duplicate of: <canonical>'
- bd list --duplicates shows all duplicate pairs

Storage:
- duplicates column pointing to canonical issue ID

Essential for large issue databases with many similar reports.


Update info.go versionChanges

Add entry to versionChanges in cmd/bd/info.go with agent-actionable changes for {{version}}


GH#517: Claude sets priority wrong on new install

Claude uses 'medium/high/low' for priority instead of P0-P4. Update bd prime/onboard output to be clearer about priority syntax. See GitHub issue #517.


Update integrations/beads-mcp/pyproject.toml to 0.30.4

Update version in pyproject.toml:
```toml
version = "0.30.4"
```

```verify
grep -q 'version = "0.30.4"' integrations/beads-mcp/pyproject.toml
```


Release v{{version}}

Version bump workflow for beads release {{version}}.

## Variables
- `{{version}}` - The new version number (e.g., 0.31.0)
- `{{date}}` - Release date (YYYY-MM-DD format)

## Workflow Steps
1. Kill running daemons
2. Run tests and linting
3. Bump version in all files (10 files total)
4. Update cmd/bd/info.go with release notes
5. Commit and push version bump
6. Create and push git tag
7. Update Homebrew formula
8. Upgrade local Homebrew installation
9. Verify installation

## Files Updated by bump-version.sh
- cmd/bd/version.go
- .claude-plugin/plugin.json
- .claude-plugin/marketplace.json
- integrations/beads-mcp/pyproject.toml
- integrations/beads-mcp/src/beads_mcp/__init__.py
- README.md
- npm-package/package.json
- cmd/bd/templates/hooks/* (4 files)
- CHANGELOG.md

## Manual Step Required
- cmd/bd/info.go - Add versionChanges entry with release notes


Work on beads-399: Add omitempty to JSONL fields for smal...

Work on beads-399: Add omitempty to JSONL fields for smaller notifications. When done, submit MR (not PR) to integration branch for Refinery.


Test stdin 2

Description from stdin test


Implement subgraph cloning with variable substitution

Core implementation of template instantiation:

1. Add `bd template instantiate <template-id> [--var key=value]...` command
2. Implement subgraph loading:
   - Load template epic
   - Recursively load all children (and their children)
   - Load all dependencies between issues in the subgraph
3. Implement variable substitution:
   - Scan titles and descriptions for `{{name}}` patterns
   - Replace with provided values
   - Error on missing required variables (or prompt interactively)
4. Implement cloning:
   - Generate new IDs for all issues
   - Create cloned issues with substituted text
   - Remap and create dependencies
5. Return the new epic ID

Consider adding `--dry-run` flag to preview what would be created.


Run tests and linting

go test -short ./... && golangci-lint run ./...


Simplify bd onboard to minimal AGENTS.md snippet pointing to bd prime

## Context
GH#604 raised concerns about bd onboard bloating AGENTS.md with ~100+ lines of static instructions that:
- Load every session whether beads is being used or not
- Get stale when bd upgrades
- Waste tokens

## Solution
Simplify `bd onboard` to output a minimal snippet (~2 lines) that points to `bd prime`:

```markdown
## Issue Tracking
This project uses beads (`bd`) for issue tracking.
Run `bd prime` for workflow context, or hooks auto-inject it.
```

## Rationale
- `bd prime` is dynamic, concise (~80 lines), and always matches installed bd version
- Hooks already auto-inject `bd prime` at session start when .beads/ detected
- AGENTS.md only needs to mention beads exists, not contain full instructions

## Implementation
1. Update `cmd/bd/onboard.go` to output minimal snippet
2. Keep `--output` flag for BD_GUIDE.md generation (may still be useful)
3. Update help text to explain the new approach


Update info.go versionChanges

Add entry to versionChanges in cmd/bd/info.go with agent-actionable changes for 0.30.7


Improve test coverage for cmd/bd/doctor/fix (23.9% → 50%)

The doctor/fix package has only 23.9% test coverage. The doctor fix functionality is important for troubleshooting.

Current coverage: 23.9%
Target coverage: 50%


Improve test coverage for cmd/bd CLI (26.2% → 50%)

The main CLI package (cmd/bd) has only 26.2% test coverage. CLI commands should have at least 50% coverage to ensure reliability.

Key areas with low/no coverage:
- daemon_autostart.go (multiple 0% functions)
- compact.go (several 0% functions)
- Various command handlers

Current coverage: 26.2%
Target coverage: 50%


Update docs for import bug fix

Update AGENTS.md, README.md, TROUBLESHOOTING.md with import.orphan_handling config documentation. Document resurrection behavior, tombstones, config modes. Add troubleshooting section for import failures with deleted parents.


gt handoff deadlock at handoff.go:125

When running 'gt handoff -m "message"' after successful MR submit, go panics with 'fatal error: all goroutines are asleep - deadlock\!' at handoff.go:125. The shutdown request still appears to be sent successfully but the command crashes. Stack trace shows issue is in runHandoff select statement.


Fix TestFallbackToDirectModeEnablesFlush deadlock causing 10min test timeout

## Problem

TestFallbackToDirectModeEnablesFlush in direct_mode_test.go deadlocks for 9m59s before timing out, causing the entire test suite to take 10+ minutes instead of <10 seconds.

## Root Cause

Database lock contention between test cleanup and flushToJSONL():
- Test cleanup (line 36) tries to close DB via defer
- flushToJSONL() (line 132) is still accessing DB
- Results in deadlock: database/sql.(*DB).Close() waits for mutex while GetJSONLFileHash() holds it

## Stack Trace Evidence

```
goroutine 512 [sync.Mutex.Lock, 9 minutes]:
database/sql.(*DB).Close(0x14000643790)
  .../database/sql/sql.go:927 +0x84
github.com/steveyegge/beads/cmd/bd.TestFallbackToDirectModeEnablesFlush.func1()
  .../direct_mode_test.go:36 +0xf4

While goroutine running flushToJSONL() holds DB connection via GetJSONLFileHash()
```

## Impact

- Test suite: 10+ minutes → should be <10 seconds
- ALL other tests pass in ~4 seconds
- This ONE test accounts for 99.9% of test runtime

## Related

This is the EXACT same issue documented in MAIN_TEST_REFACTOR_NOTES.md for why main_test.go refactoring was deferred - global state manipulation + DB cleanup = deadlock.

## Fix Approaches

1. **Add proper cleanup sequencing** - stop flush goroutines BEFORE closing DB
2. **Use test-specific DB lifecycle** - ensure flush completes before cleanup
3. **Mock the flush mechanism** - avoid real DB for testing this code path
4. **Add explicit timeout handling** - fail fast with clear error instead of hanging

## Files

- cmd/bd/direct_mode_test.go:36-132
- cmd/bd/autoflush.go:353 (validateJSONLIntegrity)
- cmd/bd/autoflush.go:508 (flushToJSONLWithState)

## Acceptance

- Test passes without timeout
- Test suite completes in <10 seconds
- No deadlock between cleanup and flush operations


Fix beads-9yc: pinned column missing from schema. gt mail...

Fix beads-9yc: pinned column missing from schema. gt mail send fails because some beads DBs lack the pinned column. Add migration to ensure it exists.


Add metadata and thread_id columns to dependencies table

Schema changes:
- ALTER TABLE dependencies ADD COLUMN metadata TEXT DEFAULT '{}'
- ALTER TABLE dependencies ADD COLUMN thread_id TEXT DEFAULT ''
- CREATE INDEX idx_dependencies_thread ON dependencies(thread_id) WHERE thread_id != ''


🤝 HANDOFF: Review remaining beads PRs

## Current State
Just merged PR #653 (doctor refactor) and added tests to restore coverage.

## Remaining Open PRs to Review
Run `gh pr list --repo steveyegge/beads` to see current list. As of handoff:

1. #655 - feat: Linear Integration (jblwilliams)
2. #651 - feat(audit): agent audit trail (dchichkov)
3. #648 - Stop init creating redundant @AGENTS.md (maphew)
4. #646 - fix(unix): handle Statfs field types (jordanhubbard)
5. #645 - feat: /plan-to-beads Claude Code command (petebytes)
6. #642, #641, #640 - sync branch fixes (cpdata)

## Review Checklist
- Check CI status with `gh pr checks <num> --repo steveyegge/beads`
- Verify no .beads/ data leaking (we have a hook now)
- Review code quality
- Merge good ones, request changes on problematic ones

## Notes
- User wants us to be proactive about merging good PRs
- Can add tests ourselves if coverage drops


Update CHANGELOG.md for {{version}}

In CHANGELOG.md:

1. Change `## [Unreleased]` section header to `## [{{version}}] - {{date}}`
2. Add new empty `## [Unreleased]` section above it
3. Review and clean up the changes list

Format:
```markdown
## [Unreleased]

## [{{version}}] - {{date}}

### Added
- ...

### Changed
- ...

### Fixed
- ...
```


Run tests and verify build

Run the test suite to verify nothing is broken:

```bash
./scripts/test.sh
```

Or manually:
```bash
go build ./cmd/bd/...
go test ./...
```

Fix any failures before proceeding.


Commit and push release

git add -A && git commit && git push to trigger CI


Fix checkExistingBeadsData to be worktree-aware

The checkExistingBeadsData function in cmd/bd/init.go checks for .beads in the current working directory, but for worktrees it should check the main repository root instead. This prevents proper worktree compatibility.


Prevent multiple daemons from running on the same repo

Multiple bd daemons running on the same repo clone causes race conditions and data corruption risks.

**Problem:**
- Nothing prevents spawning multiple daemons for the same repository
- Multiple daemons watching the same files can conflict during sync operations
- Observed: 4 daemons running simultaneously caused sync race condition

**Solution:**
Implement daemon singleton enforcement per repo:
1. Use a lock file (e.g., .beads/.daemon.lock) with PID
2. On daemon start, check if lock exists and process is alive
3. If stale lock (dead PID), clean up and acquire lock
4. If active daemon exists, either:
   - Exit with message 'daemon already running (PID xxx)'
   - Or offer --replace flag to kill existing and take over
5. Release lock on graceful shutdown

**Edge cases to handle:**
- Daemon crashes without releasing lock (stale PID detection)
- Multiple repos in same directory tree (each repo gets own lock)
- Race between two daemons starting simultaneously (atomic lock acquisition)


Install 0.30.4 MCP server locally

Upgrade the MCP server (after PyPI publish):
```bash
pip install --upgrade beads-mcp
# OR if using uv:
uv tool upgrade beads-mcp
```

Verify:
```bash
pip show beads-mcp | grep Version
```

```verify
pip show beads-mcp 2>/dev/null | grep -q 'Version: 0.30.4'
```


mol-christmas-launch: 3-day execution plan

Christmas Launch Molecule - execute phases in order, survive restarts.

PIN THIS BEAD. Check progress each session start.

## Step: phase0-beads-foundation
Fix blocking issues before swarming:
1. Verify gastown beads schema works: bd list --status=open
2. Ensure bd mol bond exists (check bd-usro)
3. Verify bd-2vh3 (squash) is filed

## Step: phase1-polecat-loop
Serial work on polecat execution:
1. gt-9nf: Fresh polecats only
2. gt-975: Molecule execution support
3. gt-8v8: Refuse uncommitted work
Then swarm: gt-e1y, gt-f8v, gt-eu9
Needs: phase0-beads-foundation

## Step: phase2-refinery
Serial work on refinery autonomy:
1. gt-5gkd: Refinery CLAUDE.md
2. gt-bj6f: Refinery context in gt prime
3. gt-0qki: Refinery-Witness protocol
Needs: phase1-polecat-loop

## Step: phase3-deacon
Health monitoring infrastructure:
1. gt-5af.4: Simplify daemon
2. gt-5af.7: Crew session patterns
3. gt-976: Crew lifecycle
Needs: phase2-refinery

## Step: phase4-code-review
Self-improvement flywheel:
1. Define mol-code-review (gt-fjvo)
2. Test on open MRs
3. Integrate with Refinery
Needs: phase3-deacon

## Step: phase5-polish
Demo readiness:
1. gt-b2hj: Find orphaned work
2. Doctor checks
3. Clean up open MRs
Needs: phase4-code-review

## Step: verify-flywheel
Success criteria:
- gt spawn works with molecules
- Refinery processes MRs autonomously
- mol-code-review runs on a PR
- bd cleanup --ephemeral works
Needs: phase5-polish


Merge: beads-ocs

branch: polecat/valkyrie
target: main
source_issue: beads-ocs
rig: beads


Graph Link: replies_to for conversation threading

Implement replies_to link type for message threading.

New command:
- bd mail reply <id> -m 'Response' creates a message with replies_to set

Query support:
- bd show <id> --thread shows full conversation thread
- Thread traversal in storage layer

Storage:
- replies_to column in issues table
- Index for efficient thread queries

This enables Reddit-style nested threads where messages reply to other messages.


Install 0.30.4 Go binary locally

Rebuild and install the Go binary:
```bash
go install ./cmd/bd
# OR
make install
```

Verify:
```bash
bd --version
```

```verify
bd --version 2>&1 | grep -q '0.30.4'
```


Fix unparam unused parameter in cmd/bd/doctor.go:1879

Linting issue: checkGitHooks - path is unused (unparam) at cmd/bd/doctor.go:1879:20. Error: func checkGitHooks(path string) doctorCheck {


Update Metrics and Health Endpoints

Remove cache-related metrics from health/metrics endpoints


Document BEADS_DIR pattern for multi-agent workspaces (Gas Town)

Gas Town and similar multi-agent systems need to configure separate beads databases per workspace/rig, distinct from any project-level beads.

## Use Case

In Gas Town:
- Each 'rig' (managed project) has multiple agents (polecats, refinery, witness)
- All agents in a rig should share a single beads database at the rig level
- This should be separate from any .beads/ the project itself uses
- The BEADS_DIR env var enables this

## Documentation Needed

1. Add a section to docs explaining BEADS_DIR for multi-agent setups
2. Example: setting BEADS_DIR in agent startup scripts/hooks
3. Clarify interaction with project-level .beads/ (BEADS_DIR takes precedence)

## Current Support

Already implemented in internal/beads/beads.go:FindDatabasePath():
- BEADS_DIR env var is checked first (preferred)
- BEADS_DB env var still supported (deprecated)
- Falls back to .beads/ search in tree

Just needs documentation for the multi-agent workspace pattern.


Graph Link: relates_to for knowledge graph

Implement relates_to link type for loose associations.

New command:
- bd relate <id1> <id2> - creates bidirectional relates_to link

Query support:
- bd show <id> --related shows related issues
- bd list --related-to <id>

Storage:
- relates_to stored as JSON array of issue IDs
- Consider: separate junction table for efficiency at scale?

This enables 'see also' connections without blocking or hierarchy.


Add bd reset command for clean slate restart

Implement a `bd reset` command to reset beads to a clean starting state.

## Context
GitHub issue #479 - users sometimes get beads into an invalid state after updates, and there's no clean way to start fresh. The git backup/restore mechanism that protects against accidental deletion also makes it hard to intentionally reset.

## Design

### Command Interface
```
bd reset [--hard] [--force] [--backup] [--dry-run] [--no-init]
```

| Flag | Effect |
|------|--------|
| `--hard` | Also remove from git index and commit |
| `--force` | Skip confirmation prompt |
| `--backup` | Create `.beads-backup-{timestamp}/` first |
| `--dry-run` | Preview what would happen |
| `--no-init` | Don't re-initialize after clearing |

### Reset Levels
1. **Soft Reset (default)** - Kill daemons, clear .beads/, re-init. Git history unchanged.
2. **Hard Reset (`--hard`)** - Also git rm and commit the removal, then commit fresh state.

### Implementation Flow
1. Validate .beads/ exists
2. If not --force: show impact summary, prompt confirmation
3. If --backup: copy .beads/ to .beads-backup-{timestamp}/
4. Kill daemons
5. If --hard: git rm + commit
6. rm -rf .beads/*
7. If not --no-init: bd init (and git add+commit if --hard)
8. Print summary

### Safety Mechanisms
- Confirmation prompt (skip with --force)
- Impact summary (issue/tombstone counts)
- Backup option
- Dry-run preview
- Git dirty check warning

### Code Structure
- `cmd/bd/reset.go` - CLI command
- `internal/reset/` - Core logic package


Add MCP server functions for repair commands

**Summary:** Added MCP server repair functions for agent dependency management, system validation, and pollution detection. Implemented across BdClientBase, BdCliClient, and daemon clients to enhance system diagnostics and self-healing capabilities.

**Key Decisions:**
- Expose repair_deps(), detect_pollution(), validate() via MCP server
- Create abstract method stubs with fallback to CLI execution
- Use @mcp.tool decorators for function registration

**Resolution:** Successfully implemented comprehensive repair command infrastructure, enabling more robust system health monitoring and automated remediation with full CLI and daemon support.

Implemented all three MCP server functions:

1. **repair_deps(fix=False)** - Find/fix orphaned dependencies
2. **detect_pollution(clean=False)** - Detect/clean test issues
3. **validate(checks=None, fix_all=False)** - Run comprehensive health checks

Changes:
- Added abstract methods to BdClientBase
- Implemented in BdCliClient (CLI execution)
- Added NotImplementedError stubs in BdDaemonClient (falls back to CLI)
- Created wrapper functions in tools.py
- Registered @mcp.tool decorators in server.py

All commands tested and working with --no-daemon flag.


GH#522: Add --type flag to bd update command

Add --type flag to bd update for changing issue type (task/epic/bug/feature). Storage layer already supports it. See GitHub issue #522.


Remove all deletions.jsonl code except migration

There's deletions manifest code spread across the entire codebase that should have been removed after tombstone migration:

Files with deletions code (non-migration):
- internal/deletions/ - entire package
- cmd/bd/sync.go - 25+ references, auto-compact, sanitize
- cmd/bd/delete.go - dual-writes to deletions.jsonl
- internal/importer/importer.go - checks deletions manifest
- internal/syncbranch/worktree.go - merges deletions.jsonl
- cmd/bd/doctor/fix/sync.go - cleanupDeletionsManifest
- cmd/bd/doctor/fix/deletions.go - HydrateDeletionsManifest
- cmd/bd/integrity.go - checks deletions for data loss
- cmd/bd/deleted.go - entire command
- cmd/bd/compact.go - pruneDeletionsManifest
- cmd/bd/doctor.go - checkDeletionsManifest
- Plus many more

Action: Aggressively remove all non-migration deletions code. Tombstones are the only deletion mechanism now.


Merge: bd-ao0s

branch: polecat/rictus
target: main
source_issue: bd-ao0s
rig: beads


Add unit tests for reset package

Comprehensive unit tests for internal/reset package.

## Test Cases

### ValidateState tests
- .beads/ exists → success
- .beads/ missing → appropriate error
- git dirty state detection

### CountImpact tests
- Empty .beads/ → zero counts
- With issues → correct count (open vs closed)
- With tombstones → correct count
- Returns HasUncommitted correctly

### Backup tests
- Creates backup with correct timestamp format
- Preserves all files and permissions
- Returns correct path
- Handles missing .beads/ gracefully
- Errors on pre-existing backup dir

### Git operation tests
- CheckGitState detects dirty, detached, not-a-repo
- GitRemoveBeads removes correct files
- GitCommitReset creates commit with message
- Operations skip gracefully when not in git repo

### Reset tests (with mocks/temp dirs)
- Soft reset removes files, calls init
- Hard reset includes git operations
- Dry run doesn't modify anything
- SkipInit flag prevents re-initialization
- Daemon killall is called
- Backup is created when requested

## Approach
- Can start with interface definitions (TDD style)
- Use testify for assertions
- Create temp directories for isolation
- Mock git operations where needed
- Test completion depends on implementation tasks

## File Location
`internal/reset/reset_test.go`
`internal/reset/backup_test.go`
`internal/reset/git_test.go`


Add comprehensive filters to bd export

Enhance bd export with filtering options for selective exports.

**Currently only has:**
- --status

**Add filters:**
- --label, --label-any
- --assignee
- --type
- --priority, --priority-min, --priority-max
- --created-after, --created-before
- --updated-after, --updated-before

**Use case:**
- Export only open issues: bd export --status open
- Export high-priority bugs: bd export --type bug --priority-max 1
- Export recent issues: bd export --created-after 2025-01-01

**Files to modify:**
- cmd/bd/export.go
- Reuse filter logic from list.go


Re: Thread Test 2

Got your message. Testing reply feature.


Remove legacy MCP Agent Mail integration

## Summary

Remove the legacy MCP Agent Mail system that requires an external HTTP server. Keep the native `bd mail` system which stores messages as git-synced issues.

## Background

Two mail systems exist in the codebase:
1. **Legacy Agent Mail** (`bd message`) - External server dependency, complex setup
2. **Native bd mail** (`bd mail`) - Built-in, git-synced, no dependencies

The legacy system causes confusion and is no longer needed. Gas Town's Town Mail will use the native `bd mail` system.

## Files to Delete

### CLI Command
- [ ] `cmd/bd/message.go` - The `bd message` command implementation

### MCP Integration
- [ ] `integrations/beads-mcp/src/beads_mcp/mail.py` - HTTP wrapper for Agent Mail server
- [ ] `integrations/beads-mcp/src/beads_mcp/mail_tools.py` - MCP tool definitions
- [ ] `integrations/beads-mcp/tests/test_mail.py` - Tests for legacy mail

### Documentation
- [ ] `docs/AGENT_MAIL.md`
- [ ] `docs/AGENT_MAIL_QUICKSTART.md`
- [ ] `docs/AGENT_MAIL_DEPLOYMENT.md`
- [ ] `docs/AGENT_MAIL_MULTI_WORKSPACE_SETUP.md`
- [ ] `docs/adr/002-agent-mail-integration.md`

## Code to Update

- [ ] Remove `message` command registration from `cmd/bd/main.go`
- [ ] Remove mail tool imports/registration from MCP server `__init__.py` or `server.py`
- [ ] Check for any other references to Agent Mail in the codebase

## Verification

- [ ] `bd message` command no longer exists
- [ ] `bd mail` command still works
- [ ] MCP server starts without errors
- [ ] Tests pass


Test pinned for stats


Upgrade local Homebrew installation

Upgrade bd via Homebrew:

```bash
brew update
brew upgrade bd
/opt/homebrew/bin/bd version  # Verify shows {{version}}
```


Test hook


Revert/remove YAML workflow system

Revert the recent commit and remove all YAML workflow code:

1. `git revert aae8407a` (the commit we just pushed with workflow fixes)
2. Remove `cmd/bd/templates/workflows/` directory
3. Remove workflow.go or gut it to minimal stub
4. Remove WorkflowTemplate types from internal/types/workflow.go
5. Remove any workflow-related RPC handlers

Keep only minimal scaffolding if needed for the new template system.


> bd sync --no-daemon
→ Exporting pending changes to JSONL...
→ Committing changes to sync branch 'beads-sync'...
Error committing to sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/fix-ci/.git: not a directory

**Problem Diagnosed**: The `bd sync` command was failing with "mkdir /var/home/matt/dev/beads/fix-ci/.git: not a directory" because it was being executed from the wrong directory.

**Root Cause**: The command was run from `/var/home/matt/dev/beads` (where the `fix-ci` worktree exists) instead of the main repository directory `/var/home/matt/dev/beads/main`. Since `fix-ci` is a git worktree with a `.git` file (not directory), the worktree creation logic failed when trying to create `<current_dir>/.git/beads-worktrees/<branch>`.

**Solution Verified**: Execute `bd sync` from the main repository directory:
```bash
cd main && bd sync --dry-run
```


bd init should stop running daemon to avoid stale cache

When running bd init, any running daemon continues with stale cached data, causing bd stats and other commands to show old counts.

Repro:
1. Have daemon running with 788 issues cached
2. Clean JSONL to 128 issues, delete db, run bd init
3. bd stats still shows 788 (daemon cache)
4. Must manually run bd daemon --stop

Fix: bd init should automatically stop any running daemon before reinitializing.


GH#402: Add --parent flag documentation to bd onboard

bd onboard output is missing --parent flag for epic subtasks. Agents guess wrong syntax (--deps parent:). See GitHub issue #402.


Review PR #513: fix hooks install docs

Review and merge PR #513 from aspiers. This PR fixes incorrect docs for how to install git hooks - updates README to use bd hooks install instead of removed install.sh. Simple 1-line change. URL: https://github.com/anthropics/beads/pull/513


Show pin indicator in bd list output

Add a visual indicator (e.g., pin emoji or [P] marker) for pinned issues in bd list output so users can easily identify them.


Add missing hook calls in mail reply and ack

The mail commands are missing hook calls:

1. runMailReply (mail.go:525-672) creates a message but doesn't call hookRunner.Run(hooks.EventMessage, ...) after creating the reply in direct mode (around line 640)

2. runMailAck (mail.go:432-523) closes messages but doesn't call hookRunner.Run(hooks.EventClose, ...) after closing each message (around line 487 for daemon mode, 493 for direct mode)

This means GGT hooks won't fire for replies or message acknowledgments.


Implement global N-way collision resolution algorithm

**Summary:** Replaced pairwise collision resolution with a global N-way algorithm that deterministically resolves issue ID conflicts across multiple clones. The new approach groups collisions, deduplicates by content hash, and assigns sequential IDs to ensure consistent synchronization.

**Key Decisions:**
- Use content hash for global, stable sorting
- Group collisions by base ID
- Assign sequential IDs based on sorted unique versions
- Eliminate order-dependent remapping logic

**Resolution:** Implemented ResolveNWayCollisions function that guarantees deterministic issue ID assignment across multiple synchronization scenarios, solving the core challenge of maintaining consistency in distributed systems with potential conflicts.


GH#519: bd sync fails when sync.branch is currently checked-out branch


Auto-recovery mode (bd sync --auto-recover)

Add bd sync --auto-recover flag that: detects problematic sync state, backs up .beads/issues.db with timestamp, rebuilds DB from JSONL atomically, verifies consistency, reports what was fixed. Provides safety valve when sync integrity fails.


Bump version in all files

Run ./scripts/bump-version.sh {{version}} to update 10 version files. Then run with --commit after info.go is updated.


False positive detection by Kaspersky Antivirus (Trojan)

Kaspersky Antivirus falsely detects beads (bd.exe v0.23.1) as a Trojan (PDM:Trojan.Win32.Generic) and removes it.
Event: Malicious object detected
Component: System Watcher
Object name: bd.exe


Add empty tasks validation in workflow create

workflow.go:321 will panic if wf.Tasks is empty. Add validation that len(wf.Tasks) > 0 before accessing wf.Tasks[0].


Implement backup functionality for reset

Add backup capability that can be used by reset command.

## Functionality
- Copy .beads/ to .beads-backup-{timestamp}/
- Timestamp format: YYYYMMDD-HHMMSS
- Preserve file permissions
- Return backup path for user feedback

## Location
`internal/reset/backup.go` - keep with reset package for now (YAGNI)

## Interface
```go
func CreateBackup(beadsDir string) (backupPath string, err error)
```

## Notes
- Simple recursive file copy, no compression needed
- Error if backup dir already exists (unlikely with timestamp)
- Backup directories SHOULD be gitignored
- Add `.beads-backup-*/` pattern to .beads/.gitignore template in doctor package
- Consider: ListBackups() for future `bd backup list` command (not for this PR)


Code Review Followup Summary: PR #481 + PR #551

## Merged PRs Summary

### PR #551: Persist close_reason to issues table
- ✅ Merged successfully
- ✅ Bug fix: close_reason now persisted in database column (not just events table)
- ✅ Comprehensive test coverage added
- ✅ Handles reopen case (clearing close_reason)

**Followup Issues Filed:**
- bd-lxzx: Document close_reason in JSONL export format
- bd-077e: Update CLI documentation for close_reason field

---

### PR #481: Context Engineering Optimizations (80-90% context reduction)
- ✅ Merged successfully
- ✅ Lazy tool discovery: discover_tools() + get_tool_info()
- ✅ Minimal issue models: IssueMinimal (~80% smaller than full Issue)
- ✅ Result compaction: Auto-compacts results >20 items
- ✅ All 28 tests passing
- ⚠ Breaking change: ready() and list() return type changed

**Followup Issues Filed:**
- bd-b318: Add integration tests for CompactedResult
- bd-4u2b: Make compaction settings configurable (THRESHOLD, PREVIEW_COUNT)
- bd-2kf8: Document CompactedResult response format in CONTEXT_ENGINEERING.md
- bd-pdr2: Document backwards compatibility considerations

---

## Overall Assessment

Both PRs are production-ready with solid implementations. All critical functionality works and tests pass. Followup issues focus on:
1. Documentation improvements (5 issues)
2. Integration test coverage (1 issue)
3. Configuration flexibility (1 issue)
4. Backwards compatibility guidance (1 issue)

No critical bugs or design issues found.

## Review Completed By
Code review process completed. Issues auto-created for tracking improvements.


Add close_reason to JSONL export format documentation

PR #551 now persists close_reason to the database, but there's a question about whether this field should be exported to JSONL format.

## Current State
- close_reason is stored in issues.close_reason column
- close_reason is also stored in events table (audit trail)
- The JSONL export format may or may not include close_reason

## Questions
1. Should close_reason be exported to JSONL format?
2. If yes, where should it go (root level or nested in events)?
3. Should there be any special handling to avoid duplication?
4. How should close_reason be handled during JSONL import?

## Why This Matters
- JSONL is the git-friendly sync format
- Other beads instances import from JSONL
- close_reason is meaningful data that should be preserved across clones

## Suggested Action
- Check if close_reason is currently exported in JSONL
- If not, add it to the export schema
- Document the field in JSONL format spec
- Add tests for round-trip (export -> import -> verify close_reason)


bd prime: AI context loading and Claude Code integration

Implement `bd prime` command and Claude Code hooks for context recovery. Hooks work with BOTH MCP server and CLI approaches - they solve the context memory problem (keeping bd workflow fresh after compaction) not the tool access problem (MCP vs CLI).


Ghost resurrection: remote status:closed wins during git merge

During bd sync, the 3-way git merge sometimes keeps remote's status:closed instead of local's status:tombstone. This causes ghost issues to resurrect even when tombstones exist.

Root cause: Git 3-way merge doesn't understand tombstone semantics. If base had closed, local changed to tombstone, and remote has closed, git might keep remote's version.

The early tombstone check in importer.go only prevents CREATION when tombstones exist in DB. But if applyDeletionsFromMerge hard-deletes the tombstones before import runs (because they're not in the merged result), the check doesn't help.

Potential fixes:
1. Make tombstones 'win' in the beads merge driver (internal/merge/merge.go)
2. Don't hard-delete tombstones in applyDeletionsFromMerge if they're in the DB
3. Export tombstones to a separate file that's not subject to merge

Ghost issues: bd-cb64c226.*, bd-cbed9619.*


Consolidate duplicate path-finding utilities (findJSONLPath, findBeadsDir, findGitRoot)

Code health review found these functions defined in multiple places:

- findJSONLPath() in autoflush.go:45-73 and doctor/fix/migrate.go
- findBeadsDir() in autoimport.go:197-239 (with git worktree handling)
- findGitRoot() in autoimport.go:242-269 (Windows path conversion)

The beads package has public FindBeadsDir() and FindJSONLPath() APIs that should be used consistently.

Impact: Bug fixes need to be applied in multiple places. Git worktree handling may not be replicated everywhere.

Fix: Consolidate all implementations to use the beads package APIs. Remove duplicates.


Test stdin body-file


Review PR #512: clarify bd ready docs

Review and merge PR #512 from aspiers. This PR clarifies what bd ready does after git pull in README.md. Simple 1-line change. URL: https://github.com/anthropics/beads/pull/512


Update local installation

Run install script or brew upgrade to get new version locally: curl -fsSL .../install.sh | bash


Version Bump: 0.32.1

Release checklist for version 0.32.1. Patch release with MCP output control params and pin field fix.


Workaround for FastMCP outputSchema bug in Claude Code

The beads MCP server (v0.23.1) successfully connects to Claude Code, but all tools fail to load with a schema validation error due to a bug in FastMCP 2.13.1.

Error: "Invalid literal value, expected \"object\"" in outputSchema.

Root Cause: FastMCP generates outputSchema with $ref at root level without "type": "object" for self-referential models (Issue).

Workaround: Use slash commands (/beads:ready) or wait for FastMCP fix.


worktree: any bd command is slow

in a git worktree any bd command is slow, with a 2-3s pause before any results are shown. The identical command with `--no-daemon` is near instant.


Auto-detect identity from directory context for bd mail

Currently bd mail inbox defaults to git user name, requiring --identity flag with exact format.

## Problem
- Mail sent to `gastown/crew/max`
- Max runs `bd mail inbox` → defaults to 'Steve Yegge' (git user)
- Max must know to use `--identity 'gastown/crew/max'` with exact slashes

## Proposed Fix
Auto-detect identity from directory context when in a Gas Town workspace:
- In `/Users/stevey/gt/gastown/crew/max`, infer identity = `gastown/crew/max`
- Pattern: `<town>/<rig>/<role>/<name>` → `<rig>/<role>/<name>`

## Additional Improvements
1. Support GT_IDENTITY env var (set by gt crew at / session spawning)
2. Support identity in .beads/config.yaml
3. Normalize format: accept both slashes and dashes as equivalent

## Context
Discovered during crew-to-crew work assignment. Max couldn't see mail despite correct nudge because identity defaulted wrong.


Add git operations for --hard reset

Implement git integration for hard reset mode.

## Operations Needed
1. `git rm -rf .beads/*.jsonl` - remove data files from index
2. `git commit -m 'beads: reset to clean state'` - commit removal
3. After re-init: `git add .beads/` and commit fresh state

## Edge Cases to Handle
- Uncommitted changes in .beads/ - warn or error
- Detached HEAD state - warn, maybe block
- Git not initialized - skip git ops, warn
- Git operations fail mid-way - clear error messaging

## Interface
```go
type GitState struct {
    IsRepo       bool
    IsDirty      bool   // uncommitted changes in .beads/
    IsDetached   bool   // detached HEAD
    Branch       string // current branch name
}

func CheckGitState(beadsDir string) (*GitState, error)
func GitRemoveBeads(beadsDir string) error
func GitCommitReset(message string) error
func GitAddAndCommit(beadsDir, message string) error
```

## Location
`internal/reset/git.go` - keep with reset package for now

Note: Codebase has no central git package. internal/compact/git.go is compact-specific.
Future refactoring could extract shared git utilities, but YAGNI for now.


Update info.go versionChanges

Add 0.32.1 entry to versionChanges map in cmd/bd/info.go


Improve bd doctor output formatting for better readability

The current bd doctor output is a wall of text that's hard to process. Consider improvements like:
- Grouping related checks into collapsible sections
- Using color/bold for section headers
- Showing only failures/warnings by default with --verbose for full output
- Better visual hierarchy between major sections
- Summary line at top (e.g., '24 checks passed, 0 warnings, 0 errors')


Protect pinned issues from bd cleanup/compact

Update bd cleanup and bd compact to never delete pinned issues, even if they are closed. Pinned issues should persist indefinitely as reference material.


Update .claude-plugin/marketplace.json to 0.30.4

Update version field in .claude-plugin/marketplace.json:
```json
"version": "0.30.4"
```

```verify
jq -e '.plugins[0].version == "0.30.4"' .claude-plugin/marketplace.json
```


Kill running daemons

Stop all bd daemons before release:

```bash
pkill -f 'bd.*daemon' || true
sleep 1
pgrep -lf 'bd.*daemon'  # Should show nothing
```


Review PR #514: fix plugin install docs

Review and merge PR #514 from aspiers. This PR fixes incorrect docs for installing Claude Code plugin from source in docs/PLUGIN.md. Clarifies shell vs Claude Code commands and fixes the . vs ./beads argument issue. URL: https://github.com/anthropics/beads/pull/514


Make DetectCollisions read-only (separate detection from modification)

**Summary:** The project restructured the collision detection process in the database to separate read-only detection from state modification, eliminating race conditions and improving system reliability. This was achieved by introducing a two-phase approach: first detecting potential collisions, then applying resolution separately.

**Key Decisions:**
- Create read-only DetectCollisions method
- Add RenameDetail to track potential issue renames
- Implement atomic ApplyCollisionResolution function
- Separate detection logic from database modification

**Resolution:** The refactoring creates a more robust, composable collision handling mechanism that prevents partial failures and maintains database consistency during complex issue import scenarios.


Remove redundant edge fields from Issue struct

Remove from Issue struct:
- RepliesTo -> dependency with type replies-to
- RelatesTo -> dependencies with type relates-to
- DuplicateOf -> dependency with type duplicates
- SupersededBy -> dependency with type supersedes

Keep: Sender, Ephemeral (these are attributes, not relationships)


Test message

Hello world


Command Set Standardization & Flag Consistency

Comprehensive improvements to bd command set based on 2025 audit findings.

## Background
See docs/command-audit-2025.md for detailed analysis.

## Goals
1. Standardize flag naming and behavior across all commands
2. Add missing flags for feature parity
3. Fix naming confusion
4. Improve consistency in JSON output

## Success Criteria
- All mutating commands support --dry-run (no --preview variants)
- bd update supports label operations
- bd search has filter parity with bd list
- Priority flags accept both int and P0-P4 format everywhere
- JSON output is consistent across all commands


Add comments to 30+ silently ignored errors or fix them

Code health review found 30+ instances of error suppression using blank identifier without explanation:

Good examples (with comments):
- merge.go: _ = gitRmCmd.Run() // Ignore errors
- daemon_watcher.go: _ = watcher.Add(...) // Ignore error

Bad examples (no context):
- create.go:213: dbPrefix, _ = store.GetConfig(ctx, "issue_prefix")
- daemon_sync_branch.go: _ = daemonClient.Close()
- migrate_hash_ids.go, version_tracking.go: _ = store.Close()

Fix: Add comments explaining WHY errors are ignored, or handle them properly.


bd mail uses git user.name for sender instead of BEADS_AGENT_NAME

When sending mail via `bd mail send`, the sender field in the stored issue uses git config user.name instead of the BEADS_AGENT_NAME environment variable.

Reproduction:
1. Set BEADS_AGENT_NAME=gastown-alpha
2. Run: bd mail send mayor/ -s 'Test' -m 'Body'
3. Check the issue.jsonl: sender is 'Steve Yegge' (git user.name) not 'gastown-alpha'

Expected: The sender field should use BEADS_AGENT_NAME when set.

This breaks the mail system for multi-agent workflows where agents need to identify themselves by their role (polecat, refinery, etc.) rather than the human user's git identity.

Related: gt mail routing integration with Gas Town


Run bd doctor at end of bd init to verify setup

Run bd doctor diagnostics at end of bd init (after line 398 in init.go). If issues found, warn user immediately: '⚠ Setup incomplete. Run bd doctor --fix to complete setup.' Catches configuration problems before user encounters them in normal workflow.