Support Ubuntu 20.04 LTS (glibc compatibility issue)

Starting at v0.22, precompiled binaries require GLIBC 2.32+ which is not available on Ubuntu 20.04 LTS (Focal Fossa). Ubuntu 20.04 has GLIBC 2.31.

Error:
```
bd: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by bd)
bd: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by bd)
```

Current workarounds:
1. Upgrade to Ubuntu 22.04+
2. Build from source: `go build -o bd ./cmd/bd/`

Root cause: Go 1.24+ runtime requires newer glibc. CGO is already disabled in .goreleaser.yml.

Possible solutions:
- Pin Go version to 1.21 or 1.22 for releases
- Use Docker/cross-compile with older build environment
- Provide separate build for older distros
- Document minimum requirements clearly

Decision: Document minimum requirements in README instead of pinning Go version.

Rationale:
- Ubuntu 20.04 LTS standard support ended April 2025 (already EOL)
- Pinning Go prevents security fixes, performance improvements, and new features
- Users on EOL distros can upgrade OS or build from source
- Added Requirements section to README with clear glibc 2.32+ requirement


purgeDeletedIssues still writes to deletions.jsonl during git-history-backfill

In purgeDeletedIssues (lines 929-939), when a deletion is recovered from git history, we:
1. Append to deletions.jsonl (backfill)
2. Create a tombstone in DB

With the tombstone approach, writing to deletions.jsonl is redundant since the tombstone will be exported to JSONL. Consider removing the deletions.jsonl backfill once we're confident in the tombstone approach.

This is related to the Phase 2 migration (bd-vw8) - we should stop writing to deletions.jsonl entirely.


Design tombstone TTL and expiration semantics

Design the TTL and expiration behavior for tombstone records. Key decisions: default TTL (recommend 30 days), configuration via config.yaml, expiration semantics (remove vs keep expired), merge behavior when tombstone expires (live issue wins), clock skew handling.


Channel isolation test - beads

Resetting stale in_progress status from old executor run (13 days old)


Inconsistent stderr printing: bd-feh warning still prints directly


Improve clean vs cleanup command naming/documentation

Clarify the difference between bd clean and bd cleanup to reduce user confusion.

**Current state:**
- bd clean: Remove temporary artifacts (.beads/bd.sock, logs, etc.)
- bd cleanup: Delete old closed issues from database

**Options:**
1. Rename for clarity:
   - bd clean → bd clean-temp
   - bd cleanup → bd cleanup-issues

2. Keep names but improve help text and documentation

3. Add prominent warnings in help output

**Preferred approach:** Option 2 (improve documentation)
- Update short/long descriptions in commands
- Add examples to help text
- Update README.md
- Add cross-references in help output

**Files to modify:**
- cmd/bd/clean.go
- cmd/bd/cleanup.go
- README.md or ADVANCED.md


Export deduplication breaks when JSONL and export_hashes table diverge

## Problem

The export deduplication feature (timestamp-only skipping) breaks when the JSONL file and export_hashes table get out of sync, causing exports to skip issues that aren't actually in the file.

## Symptoms

- `bd export` reports "Skipped 128 issue(s) with timestamp-only changes"
- JSONL file only has 38 lines but DB has 149 issues
- export_hashes table has 149 entries
- Auto-import doesn't trigger (hash matches despite missing data)
- Two repos on same commit show different issue counts

## Root Cause

shouldSkipExport() in autoflush.go compares current issue hash with stored export_hashes entry. If they match, it skips export assuming the issue is already in the JSONL.

This assumption fails when:
1. Git operations (pull, reset, checkout) change JSONL without clearing export_hashes
2. Manual JSONL edits or corruption
3. Import operations that modify DB but don't update export_hashes
4. Partial exports that update export_hashes but don't complete

## Impact

- **Critical data loss risk**: Issues appear to be tracked but aren't persisted to git
- Breaks multi-repo sync (root cause of today's debugging session)
- Auto-import fails to detect staleness (hash matches despite missing data)
- Silent data corruption (no error messages, just missing issues)

## Reproduction

1. Have DB with 149 issues, all in export_hashes table
2. Truncate JSONL to 38 lines (simulate git reset or corruption)
3. Run `bd export` - it skips 128 issues
4. JSONL still has only 38 lines but export thinks it succeeded

## Current Workaround

```bash
sqlite3 .beads/beads.db "DELETE FROM export_hashes"
bd export -o .beads/beads.jsonl
```

## Proposed Solutions

**Option 1: Verify JSONL integrity before skipping**
- Count lines in JSONL, compare with export_hashes count
- If mismatch, clear export_hashes and force full export
- Safe but adds I/O overhead

**Option 2: Hash-based JSONL validation**
- Store hash of entire JSONL file in metadata
- Before export, check if JSONL hash matches
- If mismatch, clear export_hashes
- More efficient, detects any JSONL corruption

**Option 3: Disable timestamp-only deduplication**
- Remove the feature entirely
- Always export all issues
- Simplest and safest, but creates larger git commits

**Option 4: Clear export_hashes on git operations**
- Add post-merge hook to clear export_hashes
- Clear on any import operation
- Defensive approach but may over-clear

## Recommended Fix

Combination of Options 2 + 4:
1. Store JSONL file hash in metadata after export
2. Check hash before export, clear export_hashes if mismatch
3. Clear export_hashes on import operations
4. Add `bd validate` check for JSONL/export_hashes sync

## Files Involved

- cmd/bd/autoflush.go (shouldSkipExport)
- cmd/bd/export.go (export with deduplication)
- internal/storage/sqlite/metadata.go (export_hashes table)


Windows binaries lack SQLite support (GH #253)

Windows users installing via install.ps1 get "sql: unknown driver sqlite" error. Root cause: GoReleaser was building with CGO_ENABLED=0, which excludes SQLite driver.

Fixed by:
1. Enabling CGO in .goreleaser.yml
2. Installing MinGW cross-compiler in release workflow
3. Splitting builds per platform to set correct CC for Windows

Needs new release to fix for users.


Tombstone fields not merged in mergeIssue function

The mergeIssue() function in merge.go does not handle tombstone fields (DeletedAt, DeletedBy, DeleteReason, OriginalType) when merging live issues. While tombstones are handled separately in merge3WayWithTTL(), if a tombstone ever reaches mergeIssue() via the mergeStatus safety fallback, the tombstone fields would be lost. The mergeIssue() function should either: 1) Copy tombstone fields when result.Status becomes tombstone, or 2) Assert that tombstones never reach mergeIssue() (defensive check). Files: internal/merge/merge.go:458-499


getLocalSyncBranch YAML parsing is fragile

The getLocalSyncBranch() function in autoimport.go uses a simple line-by-line YAML parser that could fail on:
- Indented sync-branch: (nested in a section)
- Comments containing sync-branch:
- Multi-line values
- Values with special characters

Current implementation at autoimport.go:161-172 does:
```go
for _, line := range strings.Split(string(data), "\n") {
    line = strings.TrimSpace(line)
    if strings.HasPrefix(line, "sync-branch:") {
        value := strings.TrimPrefix(line, "sync-branch:")
        ...
    }
}
```

The reason we can't use viper's cached config is that it's initialized at process startup from the main repo's CWD, not from the current directory at runtime. This causes issues in tests where t.Chdir() changes the directory.

Options:
1. Accept the limitation (sync-branch must be top-level, unquoted)
2. Use a proper YAML library (gopkg.in/yaml.v3) to parse just this value
3. Refactor config package to support re-initialization per directory


Vendor and integrate beads-merge tool

Incorporate @neongreen's beads-merge 3-way merge tool into bd to solve:
- Multi-workspace deletion sync (bd-hv01)
- Git merge conflicts in JSONL
- Field-level intelligent merging

**Repository**: https://github.com/neongreen/mono/tree/main/beads-merge

**Integration approach**: Vendor the Go code with attribution, pending @neongreen's approval (GitHub issue #240)

**Benefits**:
- Prevents deletion resurrection bug
- Smart dependency merging (union + dedup)
- Timestamp handling (max wins)
- Detects deleted-vs-modified conflicts
- Works as git merge driver

**Acceptance criteria**:
- beads-merge code vendored into bd codebase
- Available as `bd merge` command
- Git merge driver setup during `bd init`
- Tests verify 3-way merge logic
- Documentation updated
- @neongreen credited


Blocking issue


Test auto-start in fred


Client self-heal: remove stale pid when lock free + socket missing

When client detects:
- Socket is missing AND
- tryDaemonLock shows lock NOT held

Then automatically:
1. Remove stale daemon.pid file
2. Optionally auto-start daemon (behind BEADS_AUTO_START_DAEMON=1 env var)

This prevents stale artifacts from accumulating after daemon crashes.


Backend task


bd resolve-conflicts - Git merge conflict resolver

Automatically resolve JSONL merge conflicts.

Modes:
- Mechanical: ID remapping (no AI)
- AI-assisted: Smart merge/keep decisions
- Interactive: Review each conflict

Handles <<<<<<< conflict markers in .beads/beads.jsonl

Files: cmd/bd/resolve_conflicts.go (new)


Add import.orphan_handling config option

Add configuration option to control orphan handling behavior: 'strict' (fail on missing parent, current behavior), 'resurrect' (auto-resurrect from JSONL, recommended default), 'skip' (skip orphaned issues with warning), 'allow' (import orphans without validation). Update CONFIG.md documentation.


Cache getMultiRepoJSONLPaths() result during sync to avoid redundant calls

From bd-xo6b code review: getMultiRepoJSONLPaths() is called 3x per sync cycle.

**Current behavior:**
daemon_sync.go calls getMultiRepoJSONLPaths() three times per sync:
- Line 505: Snapshot capture before pull
- Line 575: Merge/prune after pull
- Line 613: Base snapshot update after import

**Cost per call:**
- Config lookup (likely cached, but still overhead)
- Path construction: O(N) where N = number of repos
- String allocations: (N + 1) × filepath.Join() calls

**Total per sync:** 3N path constructions + 3 config lookups + 3 slice allocations

**Impact:**
- For N=3 repos: Negligible (< 1ms)
- For N=10 repos: Still minimal
- For N=100+ repos: Wasteful

**Solution:**
Call once at sync start, reuse result:

```go
func createSyncFunc(...) func() {
    return func() {
        // ... existing setup ...

        // Call once at start
        multiRepoPaths := getMultiRepoJSONLPaths()

        // Snapshot capture
        if multiRepoPaths != nil {
            for _, path := range multiRepoPaths {
                if err := captureLeftSnapshot(path); err != nil { ... }
            }
        }

        // ... later ...

        // Merge/prune - reuse same paths
        if multiRepoPaths != nil {
            for _, path := range multiRepoPaths { ... }
        }

        // ... later ...

        // Base snapshot update - reuse same paths
        if multiRepoPaths != nil {
            for _, path := range multiRepoPaths { ... }
        }
    }
}
```

**Files:**
- cmd/bd/daemon_sync.go:449-636 (createSyncFunc)

**Note:** This is a performance optimization, not a correctness fix. Low priority unless multi-repo usage scales significantly.


Test child issue


Code Review Sweep: thorough

Perform thorough code review sweep based on accumulated activity.

**AI Reasoning:**
Significant code activity with 7608 lines added and 120 files changed indicates substantial modifications. Multiple high-churn areas (cmd/bd, internal/rpc) suggest potential for subtle issues and emerging patterns that warrant review.

**Scope:** thorough
**Target Areas:** cmd/bd, internal/rpc, .beads
**Estimated Files:** 12
**Estimated Cost:** $5

**Task:**
Review files for non-obvious issues that agents miss during focused work:
- Inefficiencies (algorithmic, resource usage)
- Subtle bugs (race conditions, off-by-one, copy-paste)
- Poor patterns (coupling, complexity, duplication)
- Missing best practices (error handling, docs, tests)
- Unnamed anti-patterns

File discovered issues with detailed reasoning and suggestions.


~/src/beads daemon has 'sql: database is closed' errors - zombie daemon


Add tests for daemon config module


Priority 0 in merge may incorrectly win over set priorities

In mergePriority(), priority 0 (which may mean 'unset' due to Go's zero value) beats any explicitly set priority like P1, P2, etc. Should probably treat 0 as 'no priority set' and not let it win conflicts.


Add MCP server functions for repair commands

Expose new repair commands via MCP server for agent access:

Functions to add:
- beads_repair_deps()
- beads_detect_pollution()
- beads_validate()
- beads_resolve_conflicts() (when implemented)

Update integrations/beads-mcp/src/beads_mcp/server.py

See repair_commands.md lines 803-884 for design.


Add cancellation and timeout tests

Add comprehensive tests for context cancellation and timeout behavior.

## Context
Part of context propagation work. Validates that bd-rtp and bd-yb8 work correctly.

## Test Coverage Needed

### 1. Cancellation Tests
- [ ] Import operation cancelled mid-stream
- [ ] Export operation cancelled mid-stream
- [ ] Database query cancelled during long operation
- [ ] No corruption after cancellation
- [ ] Proper cleanup (defers execute, connections closed)

### 2. Timeout Tests
- [ ] Operations respect context deadlines
- [ ] Appropriate error messages on timeout
- [ ] State remains consistent after timeout

### 3. Signal Handling Tests
- [ ] SIGINT (Ctrl+C) triggers cancellation
- [ ] SIGTERM triggers graceful shutdown
- [ ] Multiple signals handled correctly

## Implementation Approach
```go
func TestImportCancellation(t *testing.T) {
    ctx, cancel := context.WithCancel(context.Background())

    // Start import in goroutine
    go func() {
        err := runImport(ctx, largeFile)
        assert.Error(err, context.Canceled)
    }()

    // Cancel after short delay
    time.Sleep(100 * time.Millisecond)
    cancel()

    // Verify database integrity
    assertDatabaseConsistent(t, store)
}
```

## Files to Create/Update
- cmd/bd/import_test.go - cancellation tests
- cmd/bd/export_test.go - cancellation tests
- internal/storage/sqlite/*_test.go - context timeout tests

## Acceptance Criteria
- [ ] All critical operations have cancellation tests
- [ ] Tests verify database integrity after cancellation
- [ ] Signal handling tested (if feasible)
- [ ] Test coverage >80% for context paths


Write Agent Mail integration guide

Comprehensive guide for setting up and using Agent Mail with Beads.

Acceptance Criteria:
- Installation instructions
- Configuration (environment variables)
- Architecture diagram
- Benefits and tradeoffs
- When to use vs not use
- Troubleshooting section
- Migration from git-only mode

File: docs/AGENT_MAIL.md

Sections:
- Quick start
- How it works
- Integration points
- Graceful degradation
- Multi-machine deployment
- FAQ


Test dependency child


Centralize error handling patterns in storage layer

80+ instances of inconsistent error handling across sqlite.go with mix of %w, %v, and no wrapping.

Location: internal/storage/sqlite/sqlite.go (throughout)

Problem:
- Some use fmt.Errorf("op failed: %w", err) - correct wrapping
- Some use fmt.Errorf("op failed: %v", err) - loses error chain
- Some return err directly - no context
- Hard to debug production issues
- Can't distinguish error types

Solution: Create internal/storage/sqlite/errors.go:
- Define sentinel errors (ErrNotFound, ErrInvalidID, etc.)
- Create wrapDBError(op string, err error) helper
- Convert sql.ErrNoRows to ErrNotFound
- Always wrap with operation context

Impact: Lost error context; inconsistent messages; hard to debug

Effort: 5-7 hours


Add t.Parallel() to slow hash multiclone tests

Add t.Parallel() to TestHashIDs_MultiCloneConverge and TestHashIDs_IdenticalContentDedup so they run concurrently.

Expected savings: ~10 seconds (from 20s to ~11s)

Implementation:
- Add t.Parallel() call at start of each test function
- Verify tests don't share resources that would cause conflicts
- Run tests to confirm they work in parallel

File: beads_hash_multiclone_test.go:34, :101


bd-hv01: Deletion tracking production readiness

Epic to track all improvements and fixes needed to make the deletion tracking implementation ([deleted:bd-hv01]) production-ready.

The core 3-way merge algorithm is sound, but there are critical issues around atomicity, error handling, and edge cases that need to be addressed before this can be safely used in production.

Critical path (P1):
- Non-atomic snapshot operations
- Brittle JSON string comparison
- Silent partial deletion failures
- Race conditions in concurrent scenarios

Follow-up work (P2-P3):
- Test coverage for edge cases and multi-repo mode
- Performance optimizations
- Code refactoring and observability

Related commit: 708a81c


> bd sync --no-daemon
→ Exporting pending changes to JSONL...
→ Committing changes to sync branch 'beads-sync'...
Error committing to sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/fix-ci/.git: not a directory

**Problem Diagnosed**: The `bd sync` command was failing with "mkdir /var/home/matt/dev/beads/fix-ci/.git: not a directory" because it was being executed from the wrong directory.

**Root Cause**: The command was run from `/var/home/matt/dev/beads` (where the `fix-ci` worktree exists) instead of the main repository directory `/var/home/matt/dev/beads/main`. Since `fix-ci` is a git worktree with a `.git` file (not directory), the worktree creation logic failed when trying to create `<current_dir>/.git/beads-worktrees/<branch>`.

**Solution Verified**: Execute `bd sync` from the main repository directory:
```bash
cd main && bd sync --dry-run
```


Issue to reopen with reason


Improve Beads test coverage from 46% to 80%


Add test case for symmetric collision (both clones create same ID simultaneously)

TestTwoCloneCollision demonstrates the problem, but we need a simpler unit test for the collision resolver itself.

Test should verify:
- Two issues with same ID, different content
- Content hash determines winner deterministically
- Result is same regardless of which clone imports first
- No title swapping occurs

This can be a simpler test than the full integration test.


Extract daemon config functions to daemon_config.go


Add depth-based batch creation in upsertIssues

Replace single batch creation with depth-level batching (max depth 3). Create issues at depth 0, then 1, then 2, then 3. Prevents parent validation errors when importing hierarchical issues in same batch. File: internal/importer/importer.go:534-546


Add alias field to database schema

Extend database schema to support human-friendly aliases alongside hash IDs.

## Database Changes

### 1. Add alias column to issues table
```sql
ALTER TABLE issues ADD COLUMN alias INTEGER UNIQUE;
CREATE INDEX idx_issues_alias ON issues(alias);
```

### 2. Add alias counter table
```sql
CREATE TABLE alias_counter (
    id INTEGER PRIMARY KEY CHECK (id = 1),
    next_alias INTEGER NOT NULL DEFAULT 1
);
INSERT INTO alias_counter (id, next_alias) VALUES (1, 1);
```

### 3. Add alias conflict tracking (for multi-clone scenarios)
```sql
CREATE TABLE alias_history (
    issue_id TEXT NOT NULL,
    alias INTEGER NOT NULL,
    assigned_at TIMESTAMP NOT NULL,
    workspace_id TEXT NOT NULL,
    PRIMARY KEY (issue_id, alias)
);
```

## API Changes

### CreateIssue
- Generate hash ID
- Assign next available alias
- Store both in database

### ResolveAliasConflicts (new function)
- Detect conflicting alias assignments after import
- Apply resolution strategy (content-hash ordering)
- Reassign losers to next available aliases

## Migration Path
```bash
bd migrate --add-aliases  # Adds columns, assigns aliases to existing issues
```

## Files to Modify
- internal/storage/sqlite/schema.go
- internal/storage/sqlite/sqlite.go (CreateIssue, GetIssue)
- internal/storage/sqlite/aliases.go (new file for alias logic)
- internal/storage/sqlite/migrations.go

## Testing
- Test alias auto-assignment on create
- Test alias uniqueness constraint
- Test alias lookup performance
- Test alias conflict resolution


Add schema compatibility probe to prevent silent migration failures

Issue #262 revealed a serious bug: migrations may fail silently, causing UNIQUE constraint errors later.

Root cause:
- sqlite.New() runs migrations once on open
- checkVersionMismatch() prints 'database will be upgraded automatically' but only updates metadata
- If migrations fail or daemon runs older version, queries expecting new columns fail with 'no such column'
- Import logic misinterprets this as 'not found' and tries INSERT on existing ID
- Result: UNIQUE constraint failed: issues.id

Fix strategy (minimal):
1. Add schema probe in sqlite.New() after RunMigrations
   - SELECT all expected columns from all tables with LIMIT 0
   - If fails, retry RunMigrations and probe again
   - If still fails, return fatal error with clear message
2. Fix checkVersionMismatch to not claim 'will upgrade' unless probe passes
3. Only update bd_version after successful migration probe
4. Add schema verification before import operations
5. Map 'no such column' errors to clear actionable message

Related: #262


Message System Improvements

Consolidate improvements to the bd message command including core functionality (message reading), reliability (timeouts), validation, and code quality refactoring


Production Readiness (Optional)

Enable multi-machine deployments with containerization and monitoring.


Add bd deleted command for audit trail

Parent: bd-imj

Add command to view deletion history.

Usage:
  bd deleted              # Show recent deletions (last 7 days)
  bd deleted --since=30d  # Show deletions in last 30 days
  bd deleted --all        # Show all tracked deletions
  bd deleted bd-xxx       # Show deletion details for specific issue

Output format:
  bd-xxx  2025-11-25 10:00  stevey  duplicate of bd-yyy
  bd-yyy  2025-11-25 10:05  claude  cleanup

Acceptance criteria:
- List deletions with timestamp, actor, reason
- Filter by time range
- Lookup specific issue ID
- JSON output option for scripting


Add tests for extracted modules

Create tests for migrations.go, hash_ids.go, batch_ops.go, and validators.go


Manual task


Daemon crashes silently when multiple .db files exist in .beads/

When daemon detects multiple .db files (after filtering out .backup and vc.db files), it writes error details to .beads/daemon-error file before exiting.

The error file is checked when:
1. Daemon discovery fails to connect (internal/daemon/discovery.go)
2. Auto-start fails to yield a running daemon (cmd/bd/main.go)
3. Daemon list shows 'daemon not responding' error

This makes the error immediately visible to users without requiring them to check daemon logs.

File created:  cmd/bd/daemon.go (writes daemon-error on multiple .db detection)
Files modified:
- internal/daemon/discovery.go (reads daemon-error and surfaces in DaemonInfo.Error)
- cmd/bd/main.go (displays daemon-error when auto-start fails)

Testing: Create multiple .db files in .beads/, start daemon, verify error file created and shown in bd daemons list

Root cause: Daemon exits with os.Exit(1) when multiple .db files detected (daemon.go:1381), but error only goes to daemon log file. User sees 'daemon not responding' without knowing why.

Current detection:
- daemon.go filters out .backup and vc.db files
- bd doctor detects multiple databases
- Error message tells user to run 'bd init' or manually remove

Problem: Error is not user-visible unless they check daemon logs.

Proposed fix options:
1. Surface the error in 'bd info' and 'bd daemons list' output
2. Add a hint in error messages to run 'bd doctor' when daemon fails
3. Make daemon write error to a .beads/daemon-error file that gets checked
4. Improve 'bd doctor' to run automatically when daemon is unhealthy


Add 'bd comment' as alias for 'bd comments add'

The command 'bd comments add' is verbose and unintuitive. Add 'bd comment' as a shorter alias that works the same way.

## Rationale
- More natural: 'bd comment <issue-id> <text>' reads better than 'bd comments add <issue-id> <text>'
- Matches user expectations: users naturally try 'bd comment' first
- Follows convention: other commands like 'bd create', 'bd show', 'bd close' are verbs

## Implementation
Could be implemented as:
1. A new command that wraps bd comments add
2. An alias registered in cobra
3. Keep 'bd comments add' for backwards compatibility

## Examples
```bash
bd comment bd-1234 'This is a comment'
bd comment bd-1234 'Multi-line comment' --body 'Additional details here'
```


bd config set succeeds but doesn't persist to config.toml

Commands like `bd config set daemon.auto_push true` return "Set daemon.auto_push = true" but the config file is never created and `bd info --json | jq '.config'` returns null.

**Steps to reproduce:**
1. Run `bd config set daemon.auto_push true`
2. See success message: "Set daemon.auto_push = true"
3. Check `cat .beads/config.toml` → file doesn't exist
4. Check `bd info --json | jq '.config'` → returns null

**Expected:**
- .beads/config.toml should be created with the setting
- bd info should show the config value

**Impact:**
Users can't enable auto-push/auto-commit via CLI as documented in AGENTS.md


Extract batch operations to batch_ops.go

Move validateBatchIssues, generateBatchIDs, bulkInsertIssues, bulkRecordEvents, bulkMarkDirty, CreateIssues to batch_ops.go


Create tip system infrastructure for contextual hints

Implement a tip/hint system that shows helpful contextual messages after successful commands. This is different from the existing error-path "Hint:" messages - tips appear on success paths to educate users about features they might not know about.


Multi-clone collision resolution testing and documentation

Epic to track improvements to multi-clone collision resolution based on ultrathinking analysis of-3d844c58 and [deleted:bd-71107098].

Current state:
- 2-clone collision resolution is SOUND and working correctly
- Hash-based deterministic collision resolution works
- Test fails due to timestamp comparison, not actual logic issues

Work needed:
1. Fix TestTwoCloneCollision to compare content not timestamps
2. Add TestThreeCloneCollision for regression protection
3. Document 3-clone ID non-determinism as known behavior


Assigned issue


Fix G104 errors unhandled in internal/storage/sqlite/queries.go:1186

Linting issue: G104: Errors unhandled (gosec) at internal/storage/sqlite/queries.go:1186:2. Error: rows.Close()


Investigation & Proof of Concept

Validate that MCP Agent Mail works as expected and delivers promised benefits before committing to full integration.

POC completed successfully:
✅ bd-muls: Server installed and tested
✅ bd-27xm: MCP tool execution issues resolved
✅ [deleted:bd-6hji]: File reservation collision prevention validated
✅ bd-htfk: Latency benchmarking shows 20-50x improvement
✅ bd-pmuu: ADR 002 created documenting integration decision

Results validate Agent Mail benefits:
- Collision prevention works (exclusive file reservations)
- Latency: <100ms (vs 2000-5000ms git sync)
- Lightweight deployment (<50MB memory)
- Optional/non-intrusive integration approach validated

Next: bd-wfmw (Integration Layer Implementation)


Fixture Generator for Realistic Test Data

Create internal/testutil/fixtures/fixtures.go with functions to generate realistic test data at scale.

Functions:
- LargeSQLite(storage) - 10K issues, native SQLite
- XLargeSQLite(storage) - 20K issues, native SQLite
- LargeFromJSONL(storage) - 10K issues imported from JSONL
- XLargeFromJSONL(storage) - 20K issues imported from JSONL

Data characteristics:
- Epic hierarchies (depth 4): Epic → Feature → Task → Subtask
- Cross-linked dependencies (tasks blocking across epics)
- Realistic status/priority/label distribution
- Representative assignees and temporal data

Implementation:
- Single file: internal/testutil/fixtures/fixtures.go
- No config structs, simple direct functions
- Seeded RNG for reproducibility
- Reusable by both benchmarks and tests


Auto-detect issue prefix from existing JSONL in 'bd init'

When running `bd init` in a fresh clone with existing JSONL, it should auto-detect the issue prefix from the JSONL file instead of requiring `--prefix`.

Currently you must specify `--prefix ef` manually. But the JSONL file already contains issues like `ef-1it`, `ef-1jp` etc., so the prefix is known.

**Ideal UX**:
```
$ bd init
Detected issue prefix 'ef' from existing JSONL (38 issues).
✓ Database initialized...
```

This would make fresh clone hydration a single command: `bd init` with no flags.


bd export should verify JSONL line count matches database count

After export completes, bd should verify that the JSONL file line count matches the number of issues exported. This would catch silent failures where the export appears to succeed but doesn't actually write all issues.

Real-world scenario from VC project:
- Ran direct SQL DELETE to remove 240 issues
- Ran 'bd export -o .beads/issues.jsonl'
- No error shown, appeared to succeed
- But JSONL file was not updated (still had old line count)
- Later session found all 240 issues still in JSONL
- Had to repeat the cleanup

If export had verified line count, it would have immediately shown:
  Error: Export verification failed
    Expected: 276 issues
    JSONL file: 516 lines
    Mismatch indicates export failed to write all issues

This is especially important because:
1. JSONL is source of truth in git
2. Silent export failures cause data inconsistency
3. Users assume export succeeded if no error shown
4. The verification is cheap (just count lines)

Implementation:
- After writing JSONL, count lines in file
- Compare to len(exportedIDs)
- If mismatch, remove temp file and return error
- Show clear error message with both counts


Optimize cmd/bd long-mode tests by switching to in-process testing

The long-mode CLI tests in cmd/bd are slow (1.4-4.4 seconds each) because they spawn full bd processes via exec.Command() for every operation.

Current approach:
- Each runBD() call spawns new bd process via exec.Command(testBD, args...)
- Each process initializes Go runtime, loads SQLite, parses CLI flags
- Tests run serially (create → update → show → close)
- Even with --no-daemon flag, there's significant process spawn overhead

Example timing from test run:
- TestCLI_PriorityFormats: 2.21s
- TestCLI_Show: 2.26s
- TestCLI_Ready: 2.29s
- TestCLI_Import: 4.42s

Optimization strategy:
1. Convert most tests to in-process testing (call bd functions directly)
2. Reuse test databases across related operations instead of fresh init each time
3. Keep a few exec.Command() tests that batch multiple operations to verify the CLI path works end-to-end

This should reduce test time from ~40s to ~5s for the affected tests.

Converted all CLI tests in cli_fast_test.go to use in-process testing via rootCmd.Execute(). Created runBDInProcess() helper that:
- Calls rootCmd.Execute() directly instead of spawning processes
- Uses mutex to serialize execution (rootCmd/viper not thread-safe)
- Properly cleans up global state (store, daemonClient)
- Returns only stdout to avoid JSON parsing issues with stderr warnings

Performance results:
- In-process tests: ~0.6s each (cached even faster)
- exec.Command tests: ~3.7s each
- Speedup: ~10x faster

Kept TestCLI_EndToEnd() that uses exec.Command for end-to-end validation of the actual binary.


Add UNIQUE constraint on external_ref column

The external_ref column should have a UNIQUE constraint to prevent multiple issues from having the same external reference. This ensures data integrity when syncing from external systems (Jira, GitHub, Linear).

Current behavior:
- Multiple issues can have the same external_ref
- GetIssueByExternalRef returns first match (non-deterministic with duplicates)

Proposed solution:
- Add UNIQUE constraint to external_ref column
- Add migration to check for and resolve existing duplicates
- Update tests to verify constraint enforcement

Related: bd-1022


Refactor: extract common helpers in sync-branch hook checks

Code review of #532 fix identified duplication between checkSyncBranchHookCompatibility and checkSyncBranchHookQuick.

Suggested refactoring:
1. Extract getPrePushHookPath(path string) helper for git dir + hook path resolution
2. Extract extractHookVersion(hookContent string) helper for version parsing
3. Consider whether Warning for custom hooks is appropriate (vs OK with info message)
4. Document the intentional behavior difference between full check (Warning for custom) and quick check (OK for custom)


bd delete bulk operations fight with auto-import/daemon causing data resurrection

When bulk deleting issues (e.g., 244 closed issues older than 24h), the process fights with auto-import and daemon infrastructure:

**Expected behavior:**
- Delete 244 issues from 468-issue database
- Export to JSONL (224 lines)
- Commit and push
- Result: 224 issues

**Actual behavior:**
- Delete 244 issues
- Import runs (from stale git JSONL with 468 issues)
- Resurrects deleted issues back into database
- Export writes 356 lines (not 224)
- Math: 468 - 244 = 224, but got 356 (132 issues resurrected)

**Root cause:**
Auto-import keeps re-importing from git during the delete operation, before the new JSONL is committed. The workflow is:
1. Delete from DB
2. Auto-import runs (reads old JSONL from git with deleted issues still present)
3. Issues come back
4. Export writes partially-deleted state

**Solution options:**
1. Add `--no-auto-import` flag to bulk delete operations
2. Atomic delete-export-commit operation that suppresses imports
3. Dedicated `bd prune` command that handles this correctly
4. Lock file to prevent auto-import during bulk mutations

**Impact:**
- Bulk cleanup operations don't work reliably
- Makes it nearly impossible to prune old closed issues
- Confusing UX (delete 244, but only 112 actually removed)

**FIXED**: Auto-import now skips during delete operations to prevent resurrection.

**Root cause confirmed**: Auto-import was running in PersistentPreRun before delete executed, causing it to re-import stale JSONL from git and resurrect deleted issues.

**Solution implemented**:
1. Added delete to skip list in main.go PersistentPreRun (alongside import and sync --dry-run)
2. Delete operations now complete atomically without auto-import interference
3. Added comprehensive test (TestBulkDeleteNoResurrection) to prevent regression

**Test verification**:
- Creates 20 issues, deletes 10
- Verifies no resurrection after delete
- Confirms JSONL has correct count (10 remaining)
- All existing tests still pass


Test dependency parent


Issue 2 to reopen


Code Review Sweep: thorough

Perform thorough code review sweep based on accumulated activity.

**AI Reasoning:**
Significant code volume added (150,273 lines) across multiple critical areas, including cmd/bd, internal/storage/sqlite, and internal/rpc. High file change count (616) indicates substantial refactoring or new functionality. The metrics suggest potential for subtle architectural or implementation issues that warrant review.

**Scope:** thorough
**Target Areas:** cmd/bd, internal/storage/sqlite, internal/rpc
**Estimated Files:** 12
**Estimated Cost:** $5

**Task:**
Review files for non-obvious issues that agents miss during focused work:
- Inefficiencies (algorithmic, resource usage)
- Subtle bugs (race conditions, off-by-one, copy-paste)
- Poor patterns (coupling, complexity, duplication)
- Missing best practices (error handling, docs, tests)
- Unnamed anti-patterns

File discovered issues with detailed reasoning and suggestions.


Add date and priority filters to bd search

Add filter parity with bd list for consistent querying.

**Missing filters to add:**
- --priority, --priority-min, --priority-max
- --created-after, --created-before
- --updated-after, --updated-before
- --closed-after, --closed-before
- --empty-description, --no-assignee, --no-labels
- --desc-contains, --notes-contains

**Files to modify:**
- cmd/bd/search.go
- internal/rpc/protocol.go (SearchArgs)
- internal/storage/storage.go (Search method)

**Testing:**
- All filter combinations
- Date format parsing
- Daemon and direct mode


Clean up merge conflict artifacts in .beads directory

After resolving merge conflicts in .beads/beads.jsonl, leftover artifacts remain as untracked files:
- .beads/beads.base.jsonl
- .beads/beads.left.jsonl

These appear to be temporary files created during merge conflict resolution.

Options to fix:
1. Add these patterns to .beads/.gitignore automatically
2. Clean up these files after successful merge resolution
3. Document that users should delete them manually
4. Add a check in 'bd sync' or 'bd doctor' to detect and remove stale merge artifacts

Preferred solution: Add *.base.jsonl and *.left.jsonl patterns to .beads/.gitignore during 'bd init', and optionally clean them up automatically after successful import.


bd detect-pollution - Test pollution detector

Detect test issues that leaked into production DB.

Pattern matching for:
- Titles starting with 'test', 'benchmark', 'sample'
- Sequential numbering (test-1, test-2)
- Generic descriptions
- Created in rapid succession

Optional AI scoring for confidence.

Files: cmd/bd/detect_pollution.go (new)


fix: bd onboard hangs on Windows


Fix Windows-specific test failures in CI

Several tests are failing on Windows but passing on Linux:

**Failing tests:**
- TestFindDatabasePathEnvVar
- TestHashIDs_MultiCloneConverge
- TestHashIDs_IdenticalContentDedup
- TestDatabaseReinitialization (all 5 subtests):
  - fresh_clone_auto_import
  - database_removal_scenario
  - legacy_filename_support
  - precedence_test
  - init_safety_check
- TestFindBeadsDir_NotFound
- TestMetricsSnapshot/uptime (in internal/rpc)

**CI Run:** https://github.com/steveyegge/beads/actions/runs/19015638968

These are likely path separator or filesystem behavior differences between Windows and Linux.

Fixed all Windows path issues:
1. TestFindDatabasePathEnvVar - expects canonicalized paths ✅
2. TestHashIDs tests - use platform-specific bd.exe command ✅
3. TestMetricsSnapshot/uptime - enforce minimum 1 second uptime ✅
4. TestFindBeadsDir_NotFound - allow finding .beads in parent dirs ✅
5. TestDatabaseReinitialization - fix git path conversion on Windows (git returns /c/Users/... but filepath needs C:\Users\...) ✅

CI run in progress to verify all fixes.


CI failing on all 3/4 test jobs despite individual tests passing

CI has been broken for a day+ with mysterious test failures. Issue #173 on GitHub tracks this.

## Current Status
- **Lint job**: ✅ PASSING
- **Test (Linux)**: ❌ FAILING (exit code 1)
- **Test (Windows)**: ❌ FAILING (exit code 1)
- **Test Nix Flake**: ❌ FAILING (exit code 1)

## Key Observations
All three failing jobs show identical pattern:
- Individual test output shows PASS for every test
- Final result: `FAIL github.com/steveyegge/beads/cmd/bd`
- Exit code 1 despite no visible test failures
- Last visible test output before failure: "No Reason Issue" test (TestCloseCommand/close_without_reason)

## Investigation So Far
1. All tests appear to pass when examined individually
2. Likely causes:
   - Race detector finding data races during test cleanup (`-race` flag)
   - Panic/error occurring after main tests complete
   - Test harness issue not reporting actual failure
   - Possible regression from PR #203 (dependency_type changes)

## Recent CI Runs
- Run 19015040655 (latest): 3/4 failing
- Multiple recent commits tried to fix Windows/lint issues
- Agent on rrnewton/beads fork attempting fixes (2/4 passing there)

## Next Steps
1. Run tests locally with `-race -v` to see full output
2. Check for unreported test failures or panics
3. Examine test cleanup/teardown code
4. Review recent changes around close command tests
5. Consider if race detector is too sensitive or catching real issues

## Progress Update

### ✅ Fixed (commits 09bd4d3, 21a29bc)
1. **Daemon auto-import** - Always recompute content_hash in importer to avoid stale hashes
2. **TestScripts failures** - Added bd binary to PATH for shell subprocess tests
3. **Test infrastructure** - Added .gitignore to test repos, fixed last_import_time metadata

### ✅ CI Status (Run 19015638968)
- **Test (Linux)**: ✅ SUCCESS - All tests passing
- **Test (Windows)**: ❌ FAILURE - Pre-existing Windows test failures
- **Test Nix Flake**: ❌ FAILURE - Build fails with same test errors
- **Lint**: ❌ FAILURE - Pre-existing issue in migrate.go:647

### ❌ Remaining Issues (not related to original bd-1231)

**Windows failures:**
- TestFindDatabasePathEnvVar
- TestHashIDs_MultiCloneConverge
- TestHashIDs_IdenticalContentDedup
- TestDatabaseReinitialization (5 subtests)
- TestFindBeadsDir_NotFound
- TestMetricsSnapshot/uptime

**Lint failure:**
- cmd/bd/migrate.go:647:37: cleanupWALFiles - result 0 (error) is always nil (unparam)

**Nix failure:**
- Build fails during test phase with same test errors

### Next Steps
1. Investigate Windows-specific test failures
2. Fix linting issue in migrate.go
3. Debug Nix build test failures


Update documentation for bd prime and Claude integration

Update AGENTS.md, README.md, and QUICKSTART.md to document the new `bd prime` command, `bd setup claude` command, and tip system.


Need --no-git-history flag to disable git history backfill during import

During JSONL migration (beads.jsonl → issues.jsonl), the git history backfill mechanism causes data loss by finding issues in the old beads.jsonl git history and incorrectly treating them as deleted.

A --no-git-history flag for 'bd import' and 'bd sync' would allow users to disable the git history fallback when it's causing problems.

Use cases:
- JSONL filename migrations
- Repos with complex git history
- Debugging import issues
- Performance (skip slow git scans)

Related: bd-0gh (migration causes spurious deletions)


Rapid 3


Feature P1


Refactor path canonicalization into helper function

The path canonicalization logic (filepath.Abs + EvalSymlinks) is duplicated in 3 places:
- beads.go:131-137 (BEADS_DIR handling)
- cmd/bd/main.go:446-451 (--no-db cleanup)
- cmd/bd/nodb.go:26-31 (--no-db initialization)

Refactoring suggestion:
Extract to a helper function like:
  func canonicalizePath(path string) string

This would:
- Reduce code duplication
- Make the logic easier to maintain
- Ensure consistent behavior across all path handling

Related to bd-e16b implementation.


Fix checkExistingBeadsData to be worktree-aware

The checkExistingBeadsData function in cmd/bd/init.go checks for .beads in the current working directory, but for worktrees it should check the main repository root instead. This prevents proper worktree compatibility.


CRDT-based architecture for guaranteed convergence (v2.0)

## Vision
Redesign beads around Conflict-Free Replicated Data Types (CRDTs) to provide mathematical guarantees for N-way collision resolution at arbitrary scale.

## Current Limitations
- Content-hash based collision resolution fails at 5+ clones
- Non-deterministic convergence in multi-round scenarios
- UNIQUE constraint violations during rename operations
- No formal proof of convergence properties

## CRDT Benefits
- Provably convergent (Strong Eventual Consistency)
- Commutative/Associative/Idempotent operations
- No coordination required between clones
- Scales to 100+ concurrent workers
- Well-understood mathematical foundations

## Proposed Architecture

### 1. UUID-Based IDs
Replace sequential IDs with UUIDs:
- Current: bd-1c63eb84, bd-9063acda, bd-4d80b7b1
- CRDT: bd-a1b2c3d4-e5f6-7890-abcd-ef1234567890
- Human aliases maintained separately: #42 maps to UUID

### 2. Last-Write-Wins (LWW) Elements
Each field becomes an LWW register:
- title: (timestamp, clone_id, value)
- status: (timestamp, clone_id, value)
- Deterministic conflict resolution via Lamport timestamp + clone_id tiebreaker

### 3. Operation Log
Track all operations as CRDT ops:
- CREATE(uuid, timestamp, clone_id, fields)
- UPDATE(uuid, field, timestamp, clone_id, value)
- DELETE(uuid, timestamp, clone_id) - tombstone, not hard delete

### 4. Sync as Merge
Syncing becomes merging two CRDT states:
- No merge conflicts possible
- Deterministic merge function
- Guaranteed convergence

## Implementation Phases

### Phase 1: Research & Design (4 weeks)
- Study existing CRDT implementations (Automerge, Yjs, Loro)
- Design schema for CRDT-based issue tracking
- Prototype LWW-based Issue CRDT
- Benchmark performance vs current system

### Phase 2: Parallel Implementation (6 weeks)
- Implement CRDT storage layer alongside SQLite
- Build conversion tools: SQLite ↔ CRDT
- Maintain backward compatibility with v1.x format
- Migration path for existing databases

### Phase 3: Testing & Validation (4 weeks)
- Formal verification of convergence properties
- Stress testing with 100+ clone scenario
- Performance profiling and optimization
- Documentation and examples

### Phase 4: Migration & Rollout (4 weeks)
- Release v2.0-beta with CRDT backend
- Gradual migration from v1.x
- Monitoring and bug fixes
- Final v2.0 release

## Risks & Mitigations

**Risk 1: Performance overhead**
- Mitigation: Benchmark early, optimize hot paths
- CRDTs can be slower than append-only logs
- May need compaction strategy

**Risk 2: Storage bloat**
- Mitigation: Implement operation log compaction
- Tombstone garbage collection for deleted issues
- Periodic snapshots to reduce log size

**Risk 3: Breaking changes**
- Mitigation: Maintain v1.x compatibility layer
- Gradual migration tools
- Dual-mode operation during transition

**Risk 4: Complexity**
- Mitigation: Use battle-tested CRDT libraries
- Comprehensive documentation
- Clear migration guide

## Success Criteria
- 100-clone collision test passes without failures
- Formal proof of convergence properties
- Performance within 2x of current system
- Zero manual conflict resolution required
- Backward compatible with v1.x databases

## Timeline
18-20 weeks total (4-5 months)

## References
- Automerge: https://automerge.org
- Yjs: https://docs.yjs.dev
- Loro: https://loro.dev
- CRDT theory: Shapiro et al, A comprehensive study of CRDTs
- Related issues: bd-e6d71828, bd-7a2b58fc, bd-81abb639


Add simple cleanup command to delete closed issues

Users want a simple command to delete all closed issues without requiring Anthropic API key (unlike compact). Requested in GH #243.


Testing event-driven mode!


Workaround for FastMCP outputSchema bug in Claude Code

The beads MCP server (v0.23.1) successfully connects to Claude Code, but all tools fail to load with a schema validation error due to a bug in FastMCP 2.13.1.

Error: "Invalid literal value, expected \"object\"" in outputSchema.

Root Cause: FastMCP generates outputSchema with $ref at root level without "type": "object" for self-referential models (Issue).

Workaround: Use slash commands (/beads:ready) or wait for FastMCP fix.


Split test suites: fast vs. integration

Reorganize tests into separate packages/files for fast unit tests vs slow integration tests.

Benefits:
- Clear separation of concerns
- Easier to run just fast tests during development
- Can parallelize CI jobs better

Files to organize:
- beads_hash_multiclone_test.go (slow integration tests)
- beads_integration_test.go (medium-speed integration tests)
- Other test files (fast unit tests)


Improve test coverage for internal/beads (48.1% → 70%)

The beads package is a core package with 48.1% coverage. As the primary package for issue management, it should have at least 70% coverage.

Current coverage: 48.1%
Target coverage: 70%


Add transaction + retry logic for N-way collision resolution

## Problem
Current N-way collision resolution fails on UNIQUE constraint violations during convergence rounds when 5+ clones sync. The RemapCollisions function is non-atomic and performs operations sequentially:
1. Delete old issues (CASCADE deletes dependencies)
2. Create remapped issues (can fail with UNIQUE constraint)
3. Recreate dependencies
4. Update text references

Failure at step 2 leaves database in inconsistent state.

## Solution
Wrap collision resolution in database transaction with retry logic:
- Make entire RemapCollisions operation atomic
- Retry up to 3 times on UNIQUE constraint failures
- Re-sync counters between retries
- Add better error messages for debugging

## Implementation
Location: internal/storage/sqlite/collision.go:342 (RemapCollisions function)

```go
// Retry up to 3 times on UNIQUE constraint failures
for attempt := 0; attempt < 3; attempt++ {
    err := s.db.ExecInTransaction(func(tx *sql.Tx) error {
        // All collision resolution operations
    })
    if !isUniqueConstraintError(err) {
        return err
    }
    s.SyncAllCounters(ctx)
}
```

## Success Criteria
- 5-clone collision test passes reliably
- No partial state on UNIQUE constraint errors
- Automatic recovery from transient ID conflicts

## References
- See beads_nway_test.go:124 for the KNOWN LIMITATION comment
- Related to-7c5915ae (transaction support)

## Progress Made

1. Added `ExecInTransaction` helper to SQLiteStorage for atomic database operations
2. Added `IsUniqueConstraintError` function to detect UNIQUE constraint violations
3. Wrapped `RemapCollisions` with retry logic (up to 3 attempts) with counter sync between retries
4. Enhanced `handleRename` to detect and handle race conditions where target ID already exists
5. Added defensive checks for when old ID has been deleted by another clone

## Test Results

The changes improve N-way collision handling but don't fully solve the problem:
- Original error: `UNIQUE constraint failed: issues.id` during first convergence round
- With changes: Test proceeds further but encounters different collision scenarios
- New error: `target ID already exists with different content` in later convergence rounds

## Root Cause Analysis

The issue is more complex than initially thought. In N-way scenarios:
1. Clone A remaps bd-1c63eb84 → test-2 → test-4
2. Clone B remaps bd-1c63eb84 → test-3 → test-4
3. Both try to create test-4, but with different intermediate states
4. This creates legitimate content collisions that require additional resolution

## Next Steps

The full solution requires:
1. Making remapping fully deterministic across clones (same input → same remapped ID)
2. OR making `handleRename` more tolerant of mid-flight collisions
3. OR implementing full transaction support for multi-step collision resolution -7c5915ae)

The retry logic added here provides a foundation but isn't sufficient for complex N-way scenarios.


Improve timestamp comparison readability in import

The timestamp comparison logic uses double-negative which can be confusing:

Current code:
if !incoming.UpdatedAt.After(existing.UpdatedAt) {
    // skip update
}

More readable:
if incoming.UpdatedAt.After(existing.UpdatedAt) {
    // perform update
} else {
    // skip (local is newer)
}

This is a minor refactor for code clarity.

Related: bd-1022
Files: internal/importer/importer.go:411, 488


Add tests for daemon vs non-daemon parity in list filters

After bd-o43 RPC integration, we need tests to verify daemon mode behaves identically to direct mode for all new filter flags.

Test coverage needed:
- Pattern matching: --title-contains, --desc-contains, --notes-contains
- Date ranges: all 6 date filter flags (created/updated/closed after/before)
- Empty/null checks: --empty-description, --no-assignee, --no-labels
- Priority ranges: --priority-min, --priority-max
- Status normalization: --status all vs no status flag
- Date parsing: YYYY-MM-DD, RFC3339, and error cases
- Backward compat: deprecated --label flag still works

Oracle review findings (bd-o43):
- Date parsing should support multiple formats
- Status 'all' should be treated as unset
- NoLabels field was missing from RPC protocol
- Error messages should be clear and actionable

Test approach:
- Create RPC integration tests in internal/rpc/server_issues_epics_test.go
- Compare daemon client.List() vs direct store.SearchIssues() for same filters
- Verify error messages match between modes
- Test with real daemon instance, not just unit tests


Implement `bd prime` command for AI context loading

Create a `bd prime` command that outputs AI-optimized markdown containing essential Beads workflow context. This provides an alternative to the MCP server for token-conscious users and enables context recovery after compaction/clearing.


Run final validation and cleanup checks

Final validation pass to ensure all cleanup objectives met and no regressions introduced.

Validation checklist:
1. Dead code verification: `go run golang.org/x/tools/cmd/deadcode@latest -test ./...`
2. Test coverage: `go test -cover ./...`
3. Build verification: `go build ./cmd/bd/`
4. Linting: `golangci-lint run`
5. Integration tests
6. Metrics verification
7. Git clean check

Final metrics to report:
- LOC removed: ~____
- Files deleted: ____
- Files created: ____
- Test coverage: ____%
- Build time: ____ (before/after)
- Test run time: ____ (before/after)

Impact: Confirms all cleanup objectives achieved successfully

## Validation Results

**Dead Code:** ✅ Found and removed 1 unreachable function (`DroppedEventsCount`)
**Tests:** ✅ All pass
**Coverage:**
- Main: 39.6%
- cmd/bd: 20.2%
- Created follow-up issues (bd-85487065 through bd-bc2c6191) to improve coverage

**Build:** ✅ Clean
**Linting:** 73 issues (up from 34 baseline)
- Increase due to unused functions from refactoring
- Need cleanup in separate issue

**Integration Tests:** ✅ All pass
**Metrics:** 56,464 LOC across 193 Go files
**Git:** 2 files modified (deadcode fix + auto-synced JSONL)

## Follow-up Issues Created
- bd-85487065: Add tests for internal/autoimport (0% coverage)
- bd-0dcea000: Add tests for internal/importer (0% coverage)
- bd-4d7fca8a: Add tests for internal/utils (0% coverage)
- bd-6221bdcd: Improve cmd/bd coverage (20.2% -> target higher)
- bd-bc2c6191: Improve internal/daemon coverage (22.5% -> target higher)


Modify EnsureIDs to support parent resurrection

Update internal/storage/sqlite/ids.go:189-202 to call TryResurrectParent before failing on missing parent. Add resurrection mode flag, log resurrected parents for transparency. Maintain backwards compatibility with strict validation mode.


bd import auto-detects wrong prefix from directory name instead of issue IDs

When importing issues.jsonl into a fresh database, 'bd import' prints:

  ✓ Initialized database with prefix 'beads' (detected from issues)

But the issues all have prefix 'bd-' (e.g., bd-03r). It appears to be detecting the prefix from the directory name (.beads/) rather than from the actual issue IDs in the JSONL.

This causes import to fail with:
  validate ID prefix for bd-03r: issue ID 'bd-03r' does not match configured prefix 'beads'

Workaround: Run 'bd config set issue_prefix bd' before import, or use 'bd init --prefix bd'.


Auto-push after merge with safety check

Make bd sync a true one-command solution by auto-pushing after successful content merge.

Behavior:
- After successful content merge, auto-push by default
- Safety check: detect when >50% issues vanished AND >5 existed before
- On safety check trigger: warn but still push (do not block happy path)

Vanished means issues removed from issues.jsonl entirely, NOT status=closed (closed is legitimate swarm completion).

Location: internal/syncbranch/worktree.go
Parent issue: bd-3s8


bd-hv01: Brittle string comparison breaks with JSON field reordering

## Problem
deletion_tracking.go:125 uses string comparison to detect unchanged issues:

```go
if leftLine, existsInLeft := leftIndex[id]; existsInLeft && leftLine == baseLine {
    deletions = append(deletions, id)
}
```

This breaks if:
- JSON field order changes (legal in JSON)
- Timestamps updated by import/export
- Whitespace/formatting changes
- Floating point precision varies

## Example Failure
```json
// baseLine
{"id":"bd-1","priority":1,"status":"open"}
// leftLine (same data, different order)
{"id":"bd-1","status":"open","priority":1}
```
These are semantically identical but string comparison fails.

## Fix
Parse and compare JSON semantically:
```go
func jsonEquals(a, b string) bool {
    var objA, objB map[string]interface{}
    json.Unmarshal([]byte(a), &objA)
    json.Unmarshal([]byte(b), &objB)
    return reflect.DeepEqual(objA, objB)
}
```

## Files Affected
- cmd/bd/deletion_tracking.go:125
- cmd/bd/deletion_tracking.go:134-170 (buildIDToLineMap)


Add --parent flag to bd onboard output

bd onboard didn't document --parent flag for epic subtasks, causing AI agents to guess wrong syntax. Added --parent example and CLI help section pointing to bd <cmd> --help.

Fixes: https://github.com/steveyegge/beads/issues/402


Enforce daemon singleton per workspace with file locking

Agent in ~/src/wyvern discovered 4 simultaneous daemon processes running, causing infinite directory recursion (.beads/.beads/.beads/...). Each daemon used relative paths and created nested .beads/ directories.

Root cause: No singleton enforcement. Multiple `bd daemon` processes can start in same workspace.

Expected: One daemon per workspace (each workspace = separate .beads/ dir with bd.sock)
Actual: Multiple daemons can run simultaneously in same workspace

Note: Separate git clones = separate workspaces = separate daemons (correct). Git worktrees share .beads/ and have known limitations (documented, use --no-daemon).

## Fix Summary

Successfully prevented the nested .beads/.beads/ recursion bug by implementing two safeguards:

1. **Path Canonicalization in FindDatabasePath()** (beads.go):
   - Added filepath.Abs() + filepath.EvalSymlinks() to normalize all database paths
   - Prevents relative path edge cases that create nested directories
   - Ensures all daemons see the same canonical path

2. **Nested Directory Detection** (daemon_lifecycle.go):
   - Added explicit check for ".beads/.beads" pattern in setupDaemonLock()
   - Fails fast with clear error message if nested structure detected
   - Provides user hints about proper usage

## Root Cause

The daemon lock (added Oct 22, 2025) correctly prevents simultaneous daemons in the SAME workspace. However, when BEADS_DB used a relative path (e.g., ".beads/beads.db") from inside the .beads directory, FindDatabasePath() would resolve it to a nested path creating a separate workspace:
- First daemon: /workspace/.beads/beads.db
- Second daemon from .beads/: /workspace/.beads/.beads/beads.db ← Different lock file!

## Testing

All acceptance criteria passed:
✅ 1. Second daemon start fails with "daemon already running" error
✅ 2. Killing daemon releases lock, new daemon can start
✅ 3. No infinite .beads/ recursion possible (tested nested BEADS_DB path)
✅ 4. Works with auto-start mechanism

The fix addresses the edge case while maintaining the existing lock mechanism's correctness.


mergeTombstones does not handle empty DeletedAt timestamps

The mergeTombstones() function uses isTimeAfter() to compare deleted_at timestamps, but does not handle the edge case where one or both tombstones have empty DeletedAt fields. Current behavior with isTimeAfter() semantics: empty string returns false when compared, which means if left.DeletedAt is empty, right wins. If both are empty, behavior depends on isTimeAfter tie-breaker. This should be explicitly handled with a comment or validation. Recommendation: Add explicit handling or documentation for invalid tombstones. Files: internal/merge/merge.go:448-456


Investigate why test issues persist in database

Test issues (bd-0do3, bd-cjxp, bd-phr2, etc.) keep appearing in ready/list output, cluttering real work. These appear to be leftover test data from test runs.

Need to investigate:
1. Why are test issues not being cleaned up after tests?
2. Are tests creating issues in the main database instead of test databases?
3. Should we add better test isolation or cleanup hooks?
4. Can we add a label/prefix to distinguish test issues from real issues?

These test issues have characteristics:
- Empty descriptions
- Generic titles like "Test issue 0", "Bug P0", "Issue to reopen with reason"
- Created around 2025-11-07 19:00-19:07
- Some assigned to test users like "alice", "bob", "testuser"

## Root Cause Analysis

**Problem**: Python MCP integration tests created test issues in production `.beads/beads.db` instead of isolated test databases.

**Evidence**:
- 29 test issues created on Nov 7, 2025 at 19:00-19:07
- Patterns: "Bug P0", "Test issue X", assignees "alice"/"bob"/"testuser"
- Git commit 0e8936b shows test issues committed to .beads/beads.jsonl
- Tests were being fixed for workspace isolation around the same time

**Why It Happened**:
1. Before commit 0e8936b, `test_client_lazy_initialization()` didn't set `BEADS_WORKING_DIR`
2. Tests fell back to discovering `.beads/` in the project root directory
3. Auto-sync committed test issues to production database

**Resolution**:
1. ✅ Closed 29 test pollution issues (bd-0do3, bd-cjxp, etc.)
2. ✅ Added `failIfProductionDatabase()` guard in Go test helpers
3. ✅ Added production pollution checks in RPC test setup
4. ✅ Created `conftest.py` with pytest safety checks for Python tests
5. ✅ Added `BEADS_TEST_MODE` env var to mark test execution
6. ✅ Tests now fail fast if they detect production database usage

**Prevention**:
- All test helper functions now verify database paths are in temp directories
- Python tests fail immediately if BEADS_DB points to production
- BEADS_TEST_MODE flag helps identify test vs production execution
- Clear error messages guide developers to use proper test isolation

**Files Modified**:
- cmd/bd/test_helpers_test.go - Added failIfProductionDatabase()
- internal/rpc/rpc_test.go - Added temp directory verification
- integrations/beads-mcp/tests/conftest.py - New file with pytest safeguards


Document CLI + hooks as recommended approach over MCP

Update documentation to position CLI + bd prime hooks as the primary recommended approach over MCP server, explaining why minimizing context matters even with large context windows (compute cost, energy, environment, latency).


Update AGENTS.md with event-driven mode

Document BEADS_DAEMON_MODE env var. Explain opt-in during Phase 1. Add troubleshooting for watcher failures.


Add test coverage for internal/git package


Propagate context through command handlers

Thread context from signal-aware parent through all command handlers.

## Context
Part of context propagation work. Builds on bd-rtp (signal-aware contexts).

## Current State
Many command handlers create their own context.Background() locally instead of receiving context from parent.

## Implementation
1. Add context parameter to command handler functions
2. Pass context from cobra command Run/RunE closures
3. Update all storage operations to use propagated context

## Example Pattern
```go
// Before
Run: func(cmd *cobra.Command, args []string) {
    ctx := context.Background()
    store.GetIssues(ctx, ...)
}

// After
Run: func(cmd *cobra.Command, args []string) {
    // ctx comes from parent signal-aware context
    store.GetIssues(ctx, ...)
}
```

## Files to Update
- All cmd/bd/*.go command handlers
- Ensure context flows from main -> cobra -> handlers -> storage

## Benefits
- Commands respect cancellation signals
- Consistent context handling
- Enables timeouts and deadlines

## Acceptance Criteria
- [ ] All command handlers use propagated context
- [ ] No new context.Background() calls in command handlers
- [ ] Context flows from signal handler to storage layer


Refactor daemon.go into internal/daemonrunner

Extract daemon runtime from daemon.go (1,565 lines) into internal/daemonrunner with focused modules: config.go, daemon.go, process.go, rpc_server.go, sync.go, git.go. Keep cobra command thin.


Remove unreachable utility functions

Several small utility functions are unreachable:

Files to clean:
1. `internal/storage/sqlite/hash.go` - `computeIssueContentHash` (line 17)
   - Check if entire file can be deleted if only contains this function

2. `internal/config/config.go` - `FileUsed` (line 151)
   - Delete unused config helper

3. `cmd/bd/git_sync_test.go` - `verifyIssueOpen` (line 300)
   - Delete dead test helper

4. `internal/compact/haiku.go` - `HaikuClient.SummarizeTier2` (line 81)
   - Tier 2 summarization not implemented
   - Options: implement feature OR delete method

Impact: Removes 50-100 LOC depending on decisions


Add #nosec G304 comments to JSONL file reads in sync.go

sync.go:610 uses os.ReadFile(jsonlPath) without #nosec comment, inconsistent with other JSONL reads that have '// #nosec G304 - controlled path'.

Add comment for consistency with integrity.go:43 and import.go:316.


Fix `bd sync` failure due to daemon auto-export timestamp skew

`bd sync` fails with false-positive "JSONL is newer than database" after daemon auto-export.
Root Cause: Daemon exports local changes to JSONL, updating its timestamp. `bd sync` sees JSONL.mtime > DB.mtime and assumes external changes, blocking export.
Proposed Fixes:
1. `bd sync` auto-imports if timestamp matches but content differs (or just auto-imports).
2. Content-based comparison instead of timestamp only.


bd init UX Improvements

bd init leaves users with incomplete setup, requiring manual bd doctor --fix. Issues found: (1) git hooks not installed if user declines prompt, (2) no auto-migration when CLI is upgraded, (3) stale merge driver configs from old versions. Fix by making bd init more robust with better defaults and auto-migration.


Design contributor namespace isolation for beads pollution prevention

## Problem

When contributors work on beads-the-project using beads-the-tool, their personal work-tracking issues leak into PRs. The .beads/issues.jsonl is intentionally tracked (it's the project's issue database), but contributors' local issues pollute the diff.

This is a recursion problem unique to self-hosting projects.

## Possible Solutions to Explore

1. **Contributor namespaces** - Each contributor gets a private prefix (e.g., `bd-steve-xxxx`) that's gitignored or filtered
2. **Separate database** - Contributors use BEADS_DIR pointing elsewhere for personal tracking
3. **Issue ownership/visibility flags** - Mark issues as "local-only" vs "project"
4. **Prefix-based filtering** - Configure which prefixes are committed vs ignored

## Design Considerations

- Should be zero-friction for contributors (no manual setup)
- Must not break existing workflows
- Needs to work with sync/collaboration features
- Consider: what if a "personal" issue graduates to "project" issue?

## Expansion Needed

This is a placeholder. Needs detailed design exploration before implementation.


Config option sync.require_confirmation_on_mass_delete

Add config option for paranoid users who want confirmation before pushing after mass deletion.

Option: sync.require_confirmation_on_mass_delete
Default: false

When enabled AND safety check triggers:
- Prompt user for confirmation before pushing
- Show them what would be pushed

For users who have been burned and want extra safety. Most users will not need this.

Location: internal/config/ and internal/syncbranch/worktree.go
Parent issue: bd-3s8


Exclude tombstones from SearchIssues by default

SearchIssues() returns tombstones if they match search criteria. Per design, users generally shouldn't see deleted issues in search results.

Location: internal/storage/sqlite/queries.go:1155-1311 and transaction.go:887-1044

Options:
1. Add default tombstone exclusion unless explicitly filtering for them
2. Add IncludeTombstones field to IssueFilter

Recommendation: Add 'status != tombstone' to WHERE clause unless filter.Status == StatusTombstone


Debug test 2


Audit all cmd/bd tests and group into suites

Analyze all 279 tests in cmd/bd and identify:
1. Which tests can share DB setup (most of them\!)
2. Which tests actually need isolation (export/import, git ops)
3. Optimal grouping into test suites

Create a mapping document showing:
- Current: 279 individual test functions
- Proposed: ~10-15 test suites with subtests
- Expected speedup per suite

Blocks all refactoring work.


Deletions not propagated across multi-workspace sync

## Problem

When working with multiple beads workspaces (clones) sharing the same git remote, deleted issues keep coming back.

## Reproduction

1. Clone A deletes issue `bd-xyz` via `bd delete bd-xyz --force`
2. Clone A daemon syncs and pushes to GitHub
3. Clone B still has `bd-xyz` in its database
4. Clone B daemon exports and pushes its JSONL
5. Clone A pulls and imports → `bd-xyz` comes back!

## Root Cause

**No deletion tracking mechanism.** The system has no way to distinguish between:
- "Issue doesn't exist in JSONL because it was deleted"
- "Issue doesn't exist in JSONL because the export is stale"

Import treats missing issues as "not in this export" rather than "explicitly deleted."

## Solution Options

1. **Tombstone records** - Keep deleted issues in JSONL with `"status":"deleted"` or `"deleted_at"` field
2. **Deletion log** - Separate `.beads/deletions.jsonl` file tracking all deleted IDs
3. **Three-way merge** - Import compares: DB state, old JSONL, new JSONL
4. **Manual conflict resolution** - Detect resurrection and prompt user

## Related

- Similar to resurrection logic for orphaned children (bd-cc4f)
- beads-merge tool handles this better with 3-way merge


WASM port of bd for Claude Code Web sandboxes

Enable beads to work in Claude Code Web sandboxes by compiling bd to WebAssembly.

## Problem
Claude Code Web sandboxes cannot install bd CLI due to network restrictions:
- GitHub releases return 403
- go install fails with DNS errors
- Binary cannot be downloaded

## Solution
Compile bd Go codebase to WASM, publish to npm as drop-in replacement.

## Technical Approach
- Use GOOS=js GOARCH=wasm to compile bd
- modernc.org/sqlite already supports js/wasm target
- Publish to npm as bd-wasm package
- Full feature parity with bd CLI

## Success Criteria
- bd-wasm installs via npm in web sandbox
- All core bd commands work identically
- JSONL output matches native bd
- Performance within 2x of native

WASM port abandoned - Claude Code Web has full VMs not browser restrictions. Better: npm + native binary


Add MCP server functions for repair commands

Expose new repair commands via MCP server for agent access:

Functions to add:
- beads_repair_deps()
- beads_detect_pollution()
- beads_validate()
- beads_resolve_conflicts() (when implemented)

Update integrations/beads-mcp/src/beads_mcp/server.py

See repair_commands.md lines 803-884 for design.

Implemented all three MCP server functions:

1. **repair_deps(fix=False)** - Find/fix orphaned dependencies
2. **detect_pollution(clean=False)** - Detect/clean test issues
3. **validate(checks=None, fix_all=False)** - Run comprehensive health checks

Changes:
- Added abstract methods to BdClientBase
- Implemented in BdCliClient (CLI execution)
- Added NotImplementedError stubs in BdDaemonClient (falls back to CLI)
- Created wrapper functions in tools.py
- Registered @mcp.tool decorators in server.py

All commands tested and working with --no-daemon flag.


User Diagnostics (bd doctor --perf)

Extend cmd/bd/doctor.go to add --perf flag for user performance diagnostics.

Functionality:
- Add --perf flag to existing bd doctor command
- Collect system info (OS, arch, Go version, SQLite version)
- Collect database stats (size, issue counts, dependency counts)
- Time key operations on user's actual database:
  * bd ready
  * bd list --status=open
  * bd show <random-issue>
  * bd create (with rollback)
  * Search with filters
- Generate CPU profile automatically (timestamped filename)
- Output simple report with platform info, timings, profile location

Output example:
  Beads Performance Diagnostics
  Platform: darwin/arm64
  Database: 8,234 issues (4,123 open)

  Operation Performance:
    bd ready                  42ms
    bd list --status=open     15ms

  Profile saved: beads-perf-2025-11-13.prof
  View: go tool pprof -http=:8080 beads-perf-2025-11-13.prof

Implementation:
- Extend cmd/bd/doctor.go (~100 lines)
- Use runtime/pprof for CPU profiling
- Use time.Now()/time.Since() for timing
- Rollback test operations (don't modify user's database)


Support --reason flag in daemon mode for reopen command

The reopen.go command has a TODO at line 61 to add reason as a comment once RPC supports AddComment. Currently --reason flag is ignored in daemon mode with a warning.


Add guidance for self-hosting projects

The contributor-workflow-analysis.md is optimized for OSS contributors making PRs to upstream projects. However, it doesn't address projects like VC that use beads for their own development (self-hosting).

Self-hosting projects differ from OSS contributors:
- No upstream/downstream distinction (they ARE the project)
- May run automated executors (not just humans)
- In bootstrap/early phase (stability matters)
- Single team/owner (not multiple contributors with permissions)

Guidance needed on:
- When self-hosting projects should stay single-repo (default, recommended)
- When they should adopt multi-repo (team planning, multi-phase dev)
- How automated executors should handle multi-repo (if at all)
- Special considerations for projects in bootstrap phase

Examples of self-hosting projects: VC (building itself with beads), internal tools, pet projects


Extract duplicated validation logic from CLI commands

~150 lines of identical validation logic duplicated between cmd_create.go and cmd_update.go

Duplication found:
- validateBeadFields(): 2 identical copies (50+ lines each)
- parseTimeWithDefault(): 2 identical copies (30 lines each)
- Flag definitions: 15+ duplicate registrations

Solution: Extract to shared packages:
- internal/validation/bead.go - Centralized validation
- internal/utils/time.go - Consolidate time parsing (already exists)
- cmd/bd/flags.go - Shared flag registration

Impact: Changes require touching 2+ files; high risk of inconsistency; steep learning curve

Effort: 4-6 hours


Update docs for import bug fix

Update AGENTS.md, README.md, TROUBLESHOOTING.md with import.orphan_handling config documentation. Document resurrection behavior, tombstones, config modes. Add troubleshooting section for import failures with deleted parents.


bd doctor should check for multiple DBs, multiple JSONLs, daemon health


Audit and fix JSONL filename mismatches across all repo clones

## Problem

Multiple clones of repos are configured with different JSONL filenames (issues.jsonl vs beads.jsonl), causing:
1. JSONL files to be resurrected after deletion (one clone pushes issues.jsonl, another pushes beads.jsonl)
2. Agents unable to see issues filed by other agents after sync
3. Merge conflicts and data inconsistencies

## Root Cause

When repos were "bd doctored" or initialized at different times, some got issues.jsonl (old default) and others got beads.jsonl (Beads repo specific). These clones push their respective files, creating duplicates.

## Task

Scan all repo clones under ~/src/ (1-2 levels deep) and standardize their JSONL configuration.

### Step 1: Find all beads-enabled repos

```bash
# Find all directories named 'beads' at levels 1-2 under ~/src/
find ~/src -maxdepth 2 -type d -name beads
```

### Step 2: For each repo found, check configuration

For each directory from Step 1, check:
- Does `.beads/metadata.json` exist?
- What is the `jsonl_export` value?
- What JSONL files actually exist in `.beads/`?
- Are there multiple JSONL files (problem!)?

### Step 3: Create audit report

Generate a report showing:
```
Repo Path                           | Config        | Actual Files           | Status
----------------------------------- | ------------- | ---------------------- | --------
~/src/beads                         | beads.jsonl   | beads.jsonl            | OK
~/src/dave/beads                    | issues.jsonl  | issues.jsonl           | MISMATCH
~/src/emma/beads                    | issues.jsonl  | issues.jsonl, beads.jsonl | DUPLICATE!
```

### Step 4: Determine canonical name for each repo

For repos that are the SAME git repository (check `git remote -v`):
- Group them together
- Determine which JSONL filename should be canonical (majority wins, or beads.jsonl for the beads repo itself)
- List which clones need to be updated

### Step 5: Generate fix script

Create a script that for each mismatched clone:
1. Updates `.beads/metadata.json` to use the canonical name
2. If JSONL file needs renaming: `git mv .beads/old.jsonl .beads/new.jsonl`
3. Removes any duplicate JSONL files: `git rm .beads/duplicate.jsonl`
4. Commits the change
5. Syncs: `bd sync`

### Expected Output

1. Audit report showing all repos and their config status
2. List of repos grouped by git remote (same repository)
3. Fix script or manual instructions for standardizing each repo
4. Verification that after fixes, all clones of the same repo use the same JSONL filename

### Edge Cases

- Handle repos without metadata.json (use default discovery)
- Handle repos with no git remote (standalone/local)
- Handle repos that are not git repositories
- Don't modify repos with uncommitted changes (warn instead)

### Success Criteria

- All clones of the same git repository use the same JSONL filename
- No duplicate JSONL files in any repo
- All configurations documented in metadata.json
- bd doctor passes on all repos


sync.branch config lost on clone - should be in config.yaml

## Problem

The sync.branch configuration is stored in the SQLite database, which is gitignored. When contributors clone a repo that uses beads:

1. They get .beads/issues.jsonl (tracked)
2. They don't get .beads/beads.db (gitignored)
3. They lose the sync.branch config

When they run 'bd init' or 'bd doctor --fix', sync.branch gets auto-set to the current branch (usually 'main'), but if the project uses a dedicated sync branch like 'beads-sync', they'll be committing to the wrong branch.

## Root Cause

syncbranch.Get() only checks:
1. BEADS_SYNC_BRANCH env var
2. Database config (store.GetConfig)

It never reads from config.yaml, which IS tracked in git and persists across clones.

## Proposed Solution

Add sync-branch support to config.yaml with this precedence:
1. BEADS_SYNC_BRANCH env var (highest)
2. config.yaml sync-branch setting
3. Database config (legacy/local override)
4. Auto-detect from current branch (lowest)

Changes needed:
1. Update syncbranch.Get() to check config.GetString('sync-branch') between env and database
2. Update config.yaml template in init.go to include sync-branch
3. Update docs to recommend setting sync-branch in config.yaml for team projects
4. Consider: bd init --branch should also write to config.yaml, not just database


Test child direct


Document error handling strategy for metadata update failures

Multiple places silently ignore metadata update failures (sync.go:614-617, import.go:320-322) with non-fatal warnings. This is intentional (degrades gracefully to mtime-based approach) but not well documented.

Add comments explaining:
- Why these failures are non-fatal
- How system degrades gracefully
- What the fallback behavior is (mtime-based detection)


Jira import script (jira2jsonl.py)

Create a Python script to import Jira issues into beads JSONL format.

**Pattern**: Follow examples/github-import/gh2jsonl.py

**Features needed**:
- Fetch issues via Jira REST API with JQL queries
- Pagination handling (100 issues per request)
- Map Jira fields to beads fields (see schema mapping in epic)
- Set external_ref to Jira issue URL for re-sync
- Support both Jira Cloud and Server/Data Center APIs
- Read config from bd config (jira.url, jira.project, jira.api_token)

**Config-driven mapping**:
- jira.status_map.* for status conversion
- jira.type_map.* for issue type conversion
- jira.priority_map.* for priority conversion

**Usage**:
```bash
python jira2jsonl.py --project PROJ | bd import
# or
python jira2jsonl.py --jql 'project=PROJ AND status\!=Done' | bd import
```

**Output**: JSONL with external_ref set to Jira issue URL


Git merge driver uses invalid placeholders (%L, %R instead of %A, %B)

## Problem

The beads git merge driver is configured with invalid Git placeholders:

```
git config merge.beads.driver "bd merge %A %O %L %R"
```

Git doesn't recognize `%L` or `%R` as valid merge driver placeholders. The valid placeholders are:
- `%O` = base (common ancestor)
- `%A` = current version (ours)
- `%B` = other version (theirs)

## Impact

- Affects ALL users when they have `.beads/beads.jsonl` merge conflicts
- Automatic JSONL merge fails with error: "error reading left file: failed to open file: open 7: no such file or directory"
- Users must manually resolve conflicts instead of getting automatic merge

## Root Cause

The `bd init` command (or wherever the merge driver is configured) is using non-standard placeholders. When Git encounters `%L` and `%R`, it either passes them literally or interprets them incorrectly.

## Fix

Update the merge driver configuration to:
```
git config merge.beads.driver "bd merge %A %O %A %B"
```

Where:
- 1st `%A` = output file (current file, will be overwritten)
- `%O` = base (common ancestor)
- 2nd `%A` = left/current version
- `%B` = right/other version

## Action Items

1. Fix `bd init` (or equivalent setup command) to use correct placeholders
2. Add migration/warning for existing users with misconfigured merge driver
3. Update documentation with correct merge driver setup
4. Consider adding validation when `bd init` is run


Fix bd doctor --fix recursive message for deletions manifest

When running bd doctor --fix, if the deletions manifest check fails but there are no deleted issues in git history, the fix succeeds but doesn't create the file. The check then runs again and tells user to run bd doctor --fix - the same command they just ran.

Fix: Create empty deletions.jsonl when hydration finds no deletions, and recognize empty file as valid in the check.

Fixes: https://github.com/steveyegge/beads/issues/403


mergePriority: negative priorities not handled consistently


Performance Testing Framework

Add comprehensive performance testing for beads focusing on optimization guidance and validating 10K+ database scale. Uses standard Go tooling, follows existing patterns, minimal complexity.

Components:
- Benchmark suite for critical operations at 10K-20K scale
- Fixture generator for realistic test data (epic hierarchies, cross-links)
- User diagnostics via bd doctor --perf
- Always-on profiling integration

Goals:
- Identify bottlenecks for optimization work
- Validate performance at 10K+ issue scale
- Enable users to collect diagnostics for bug reports
- Support both SQLite and JSONL import paths


Add bd doctor --fix flag to automatically repair issues

Implement a --fix flag for bd doctor that can automatically repair detected issues.

Requirements:
- Add --fix flag to bd doctor command
- Show all fixable issues and prompt for confirmation before applying fixes
- Organize fix implementations under doctor/fix/<type_of_fix>.go
- Each fix type should have its own file (e.g., doctor/fix/hooks.go, doctor/fix/sync.go)
- Display what will be fixed and ask user to confirm (Y/n) before proceeding
- Support fixing issues like:
  - Missing or broken git hooks
  - Sync problems with remote
  - File permission issues
  - Any other auto-repairable issues doctor detects

Implementation notes:
- Maintain separation between detection (existing doctor code) and repair (new fix code)
- Each fix should be idempotent and safe to run multiple times
- Provide clear output about what was fixed
- Log any fixes that fail with actionable error messages


Pre-push hook and daemon export produce different JSONL

After committing and pushing, git status shows .beads/beads.jsonl as dirty. Investigation shows:

1. Pre-push hook ran successfully and exported DB → JSONL
2. Push completed
3. Shortly after, daemon exported DB → JSONL again with different content
4. Diff shows comments added to old issues (bd-23a8, bd-6049, bd-87a0)

Timeline:
- Commit c731c45 "Update beads JSONL"
- Pre-push hook exported JSONL
- Push succeeded
- Daemon PID 33314 exported again with different content

Questions:
1. Did someone run a command between commit and daemon export?
2. Is there a timing issue where pre-push hook doesn't capture all DB changes?
3. Should pre-commit hook flush daemon changes before committing?

The comments appear to be from Nov 5 (created_at: 2025-11-05T08:38:46Z) but are only appearing in JSONL now. This suggests the DB had these comments but they weren't exported during pre-push.

Possible causes:
- Pre-push hook uses BEADS_NO_DAEMON=1 which might skip pending writes
- Daemon has unflushed changes in memory
- Race condition between pre-push export and daemon's periodic export

Improved fix based on oracle code review:
1. Pre-push now flushes pending changes first (prevents debounce race)
2. Uses git status --porcelain to catch all change types
3. Handles both beads.jsonl and issues.jsonl
4. Works even if bd not installed (git-only check)


Migration tool for existing users

Ensure smooth migration for existing users to separate branch workflow.

Tasks:
- Add bd migrate --separate-branch command
- Detect existing repos, migrate cleanly
- Preserve git history
- Add rollback mechanism
- Test migration on beads' own repo (dogfooding)
- Communication plan (GitHub discussion, docs)
- Version compatibility checks

Estimated effort: 2-3 days


Multi-repo hydration layer

Build core infrastructure to hydrate database from N repos (N≥1), with smart caching via file mtime tracking and routing writes to correct JSONL based on source_repo metadata.


bd sync should not stage gitignored snapshot files

## Problem

`gitCommitBeadsDir` in `cmd/bd/sync.go` runs `git add .beads/` which stages all files in the directory, including snapshot files that are listed in `.beads/.gitignore`.

If a snapshot file (e.g., `beads.left.meta.json`) was ever committed before being added to `.gitignore`, git continues to track it. This causes merge conflicts when multiple polecats run `bd sync` concurrently, since each one modifies and commits these temporary files.

## Root Cause

Line ~568 in sync.go:
```go
addCmd := exec.CommandContext(ctx, "git", "add", beadsDir)
```

This stages everything in `.beads/`, but `.gitignore` only prevents *untracked* files from being added - it doesn't affect already-tracked files.

## Suggested Fix

Option A: After `git add .beads/`, run `git reset` on snapshot files:
```go
exec.Command("git", "reset", "HEAD", ".beads/beads.*.jsonl", ".beads/*.meta.json")
```

Option B: Stage only specific files instead of the whole directory:
```go
exec.Command("git", "add", ".beads/issues.jsonl", ".beads/deletions.jsonl", ".beads/metadata.json")
```

Option C: Detect and untrack snapshot files if they're tracked:
```go
// Check if file is tracked: git ls-files --error-unmatch <file>
// If tracked, run: git rm --cached <file>
```

Option B is probably cleanest - explicitly add only the files that should be committed.


PushSyncBranch may fail if worktree was cleaned up


Add unit tests for reset package

Comprehensive unit tests for internal/reset package.

## Test Cases

### ValidateState tests
- .beads/ exists → success
- .beads/ missing → appropriate error
- git dirty state detection

### CountImpact tests
- Empty .beads/ → zero counts
- With issues → correct count (open vs closed)
- With tombstones → correct count
- Returns HasUncommitted correctly

### Backup tests
- Creates backup with correct timestamp format
- Preserves all files and permissions
- Returns correct path
- Handles missing .beads/ gracefully
- Errors on pre-existing backup dir

### Git operation tests
- CheckGitState detects dirty, detached, not-a-repo
- GitRemoveBeads removes correct files
- GitCommitReset creates commit with message
- Operations skip gracefully when not in git repo

### Reset tests (with mocks/temp dirs)
- Soft reset removes files, calls init
- Hard reset includes git operations
- Dry run doesn't modify anything
- SkipInit flag prevents re-initialization
- Daemon killall is called
- Backup is created when requested

## Approach
- Can start with interface definitions (TDD style)
- Use testify for assertions
- Create temp directories for isolation
- Mock git operations where needed
- Test completion depends on implementation tasks

## File Location
`internal/reset/reset_test.go`
`internal/reset/backup_test.go`
`internal/reset/git_test.go`


Extract normalizeLabels to shared utility package

The `normalizeLabels` function appears in multiple locations with identical implementation. Extract to a shared utility package.

Current locations:
- `internal/rpc/server.go:37` (53 lines) - full implementation
- `cmd/bd/list.go:50-52` - uses the server version (needs to use new shared version)

Function purpose:
- Trims whitespace from labels
- Removes empty strings
- Deduplicates labels
- Preserves order

Target structure:
```
internal/util/
├── strings.go         # String utilities
    └── NormalizeLabels([]string) []string
```

Impact: DRY principle, single source of truth, easier to test


Add tombstone validation: require deleted_at for tombstone status

ValidateWithCustomStatuses() doesn't enforce that tombstones must have deleted_at set. Per bd-2m7 design: 'If status == tombstone, then deleted_at MUST be set'. Also should validate that non-tombstones cannot have deleted_at set.

Location: internal/types/types.go:109-114

Add validation:
- if i.Status == StatusTombstone && i.DeletedAt == nil: error
- if i.Status != StatusTombstone && i.DeletedAt != nil: error


Fix variable shadowing in GetNextChildID resurrection code

## Problem
Minor variable shadowing in hash_ids.go:

```go
// Line 33: err declared here
err := s.db.QueryRowContext(ctx, `SELECT COUNT(*) FROM issues WHERE id = ?`, parentID).Scan(&count)

// Line 38: err reused/shadowed here
resurrected, err := s.TryResurrectParent(ctx, parentID)
```

While Go allows this, it can be confusing and some linters flag it.

## Solution
Use different variable name:

```go
resurrected, resurrectErr := s.TryResurrectParent(ctx, parentID)
if resurrectErr != nil {
    return "", fmt.Errorf("failed to resurrect parent %s: %w", parentID, resurrectErr)
}
```

## Files
- internal/storage/sqlite/hash_ids.go:38

## Priority
Low - code works correctly, just a style improvement


Improve CheckStaleness error handling

## Problem

CheckStaleness returns 'false' (not stale) for multiple error conditions instead of returning errors. This masks problems.

**Location:** internal/autoimport/autoimport.go:253-285

## Edge Cases That Return False

1. **Invalid last_import_time format** (line 259-262)
2. **No JSONL file found** (line 267-277)
3. **JSONL stat fails** (line 279-282)

## Fix

Return errors for abnormal conditions:

```go
lastImportTime, err := time.Parse(time.RFC3339, lastImportStr)
if err != nil {
    return false, fmt.Errorf("corrupted last_import_time: %w", err)
}

if jsonlPath == "" {
    return false, fmt.Errorf("no JSONL file found")
}

stat, err := os.Stat(jsonlPath)
if err != nil {
    return false, fmt.Errorf("cannot stat JSONL: %w", err)
}
```

## Impact
Medium - edge cases are rare but should be handled

## Effort
30 minutes - requires updating callers in RPC server


Test Epic

## Overview

[Describe the high-level goal and scope of this epic]

## Success Criteria

- [ ] Criteria 1
- [ ] Criteria 2
- [ ] Criteria 3

## Background

[Provide context and motivation]

## Scope

**In Scope:**
- Item 1
- Item 2

**Out of Scope:**
- Item 1
- Item 2


Investigate jujutsu integration for beads

Research and document how beads could integrate with jujutsu (jj), the next-generation VCS. Key areas to explore:
- How jj's operation model differs from git (immutable operations, working-copy-as-commit)
- JSONL sync strategy with jj's conflict resolution model
- Daemon compatibility with jj's more frequent rewrites
- Whether auto-import/export needs changes for jj workflows
- Example configurations and documentation updates needed


Migration guide documentation

Write comprehensive migration guide covering: OSS contributor workflow, team workflow, multi-phase development, multiple personas. Include step-by-step instructions, troubleshooting, and backward compatibility notes.


Update LINTING.md with current baseline

After cleanup, document the remaining acceptable baseline in LINTING.md so we can track regression.


Proposal: Custom status states via config

Proposal to add 'custom status states' via `bd config`.
Users could define an optional issue status enum (e.g., awaiting_review, review_in_progress) in the config.
This would enable multi-step pipelines to process issues where each step correlates to a specific status.

Examples:
- awaiting_verification
- awaiting_docs
- awaiting_testing


Rapid 4


Implement fs bridge layer for WASM (Go syscall/js to Node.js fs)

Go's os package in WASM returns 'not implemented on js' for mkdir and other file operations. Need to create a bridge layer that:

1. Detects WASM environment (GOOS=js)
2. Uses syscall/js to call Node.js fs module functions
3. Implements wrappers for:
   - os.MkdirAll
   - os.ReadFile / os.WriteFile
   - os.Open / os.Create
   - os.Stat / os.Lstat
   - filepath operations

Approach:
- Create internal/wasm/fs_bridge.go with //go:build js && wasm
- Export Node.js fs functions to Go using global.readFileSync, global.writeFileSync, etc.
- Wrap in Go API that matches os package signatures
- Update beads.go and storage layer to use bridge when in WASM

This unblocks bd-4462 (basic WASM testing) and [deleted:bd-5bbf] (feature parity testing).


Test FK constraint via close


Test RPC mutation event


Add unit tests for parent resurrection

Test resurrection with deleted parent (should succeed), resurrection with never-existed parent (should fail gracefully), multi-level resurrection (bd-abc.1.2 with both parents missing). Verify tombstone creation and is_tombstone flag.


Doctor: exclude merge artifacts from 'multiple JSONL' warning

## Problem
`bd doctor` warns about 'Multiple JSONL files found' when merge artifact files exist:
```
JSONL Files: Multiple JSONL files found: beads.base.jsonl, beads.left.jsonl, issues.jsonl ⚠
```

This is confusing because these aren't real issue JSONL files - they're temporary snapshots for deletion tracking.

## Fix
Exclude known merge artifact patterns from the multiple-JSONL warning:

```go
// In doctor JSONL check
skipPatterns := map[string]bool{
    "beads.base.jsonl": true,
    "beads.left.jsonl": true,
    "beads.right.jsonl": true,
}
```

## Files
- cmd/bd/doctor/ (JSONL check logic)


Blocked issue


Add bd migrate-tombstones command

Create migration command to convert existing deletions.jsonl entries to tombstones. Support --dry-run and --verbose flags. Archive old file with .migrated suffix. Per design bd-dli.


Fix unparam unused parameter in cmd/bd/doctor.go:541

Linting issue: checkHooksQuick - path is unused (unparam) at cmd/bd/doctor.go:541:22. Error: func checkHooksQuick(path string) string {


Add bd daemon --stop-all command to kill all daemon processes

Currently there's no easy way to stop all running bd daemon processes. Users must resort to pkill -f 'bd daemon' or similar shell commands.

Add a --stop-all flag to bd daemon that:
1. Finds all running bd daemon processes (not just the current repo's daemon)
2. Gracefully stops them all
3. Reports how many were stopped

This is useful when:
- Multiple daemons are running and causing race conditions
- User wants a clean slate before running bd sync
- Debugging daemon-related issues


Issue with labels


bd ready taking 5 seconds with 132 issues (89 closed)

User reports bd ready is annoyingly slow on M2 Mac - 5 seconds for 132 issues (89 closed). Started noticing after hash-based IDs update. Need to investigate performance regression. Reported in GH #243.

Root cause identified: Not a query performance issue, but stale daemon locks causing 5s timeout delays.

Fixed in bd-ndyz (closed) via 5 sub-issues:
- bd-expt: Fast-fail socket checks (200ms timeout)
- bd-wgu4: Lock probe before RPC attempts
- bd-1mzt: Self-heal stale artifacts
- bd-vcg5: Panic recovery + socket cleanup
- bd-j7e2: RPC diagnostics (BD_RPC_DEBUG)

All fixes merged. Ready for v0.22.2 release.


Add WebSocket support

## Feature Request

[Describe the desired feature]

## Motivation

[Why is this feature needed? What problem does it solve?]

## Use Cases

1. **Use Case 1**: [description]
2. **Use Case 2**: [description]

## Proposed Solution

[High-level approach to implementing this feature]

## Alternatives Considered

- **Alternative 1**: [description and why not chosen]
- **Alternative 2**: [description and why not chosen]


Add Claude Code web installation docs to README

GH #439 reported installation issues in Claude Code web environment. The go install fallback works, but users need guidance. Add a section to README documenting the workaround: go install + PATH export.


Add MCP server functions for repair commands

Expose new repair commands via MCP server for agent access:

Functions to add:
- beads_repair_deps()
- beads_detect_pollution()
- beads_validate()
- beads_resolve_conflicts() (when implemented)

Update integrations/beads-mcp/src/beads_mcp/server.py

See repair_commands.md lines 803-884 for design.


Test P1 priority


Implement git worktree management

Create git worktree lifecycle management for separate beads branch.

Tasks:
- Create internal/git/worktree.go
- Implement CreateBeadsWorktree(branch, path)
- Implement RemoveBeadsWorktree(path)
- Implement CheckWorktreeHealth(path)
- Configure sparse checkout (only .beads/)
- Implement SyncJSONLToWorktree()
- Handle worktree errors gracefully
- Auto-cleanup on config change

Estimated effort: 3-4 days


Consider extracting error handling helpers

Evaluate creating FatalError() and WarnError() helpers as suggested in ERROR_HANDLING.md to reduce boilerplate and enforce consistency. Prototype in a few files first to validate the approach.