Benchmark Helper Functions

Extend existing benchmark helpers in internal/storage/sqlite/bench_helpers_test.go (or create if organizing separately).

Existing helper (in compact_bench_test.go):
- setupBenchDB(tb) - Creates temp SQLite database with basic config
  * Used by compact and cycle benchmarks
  * Returns (*SQLiteStorage, cleanup func())

New helpers to add:
- setupLargeBenchDB(b *testing.B) storage.Storage
  * Creates 10K issue database using LargeSQLite fixture
  * Returns configured storage instance

- setupXLargeBenchDB(b *testing.B) storage.Storage
  * Creates 20K issue database using XLargeSQLite fixture
  * Returns configured storage instance

Implementation options:
1. Add to existing compact_bench_test.go (co-located with setupBenchDB)
2. Create new bench_helpers_test.go for organization

Both approaches:
- Build tag: //go:build bench
- Uses fixture generator from internal/testutil/fixtures
- Follows existing setupBenchDB() pattern
- Handles database cleanup

These helpers reduce duplication across new benchmark functions and provide consistent large-scale database setup.


Import reports misleading '0 created, 0 updated' when actually importing all issues

When running 'bd import' on a fresh database (no existing issues), the command reports 'Import complete: 0 created, 0 updated' even though it successfully imported all issues from the JSONL file.

**Steps to reproduce:**
1. Delete .beads/beads.db
2. Run: bd import .beads/issues.jsonl
3. Observe output: 'Import complete: 0 created, 0 updated'
4. Run: bd list
5. Confirm: All issues are actually present in the database

**Expected behavior:**
Report the actual number of issues imported, e.g., 'Import complete: 523 created, 0 updated'

**Actual behavior:**
'Import complete: 0 created, 0 updated' (misleading - makes user think import failed)

**Impact:**
- Users think import failed when it succeeded
- Confusing during database sync operations (e.g., after git pull)
- Makes debugging harder (can't tell if import actually worked)

**Context:**
Discovered during VC session when syncing database after git pull. The misleading message caused confusion about whether the database was properly synced with the canonical JSONL file.


Enhance dep tree to show full dependency graph

When running `bd dep tree <issue-id>`, the current output only shows the issue itself without its dependency relationships.

## Current Behavior

```
$ bd dep tree gt-0iqq
🌲 Dependency tree for gt-0iqq:

→ gt-0iqq: Implement Boss (global overseer) [P2] (open)
```

This doesn't show any of the dependency structure.

## Desired Behavior

Show the full dependency DAG rooted at the given issue. For example:

```
$ bd dep tree gt-0iqq
🌲 Dependency tree for gt-0iqq:

gt-0iqq: Implement Boss (global overseer) [P2] (open)
├── gt-0xh4: Boss session management [P2] (open) [READY]
│   ├── gt-le7c: Boss mail identity [P2] (open)
│   │   ├── gt-r8fe: Boss human escalation queue [P2] (open)
│   │   └── gt-vdak: Boss dispatch loop [P2] (open)
│   │       └── gt-kgy6: Boss resource management [P2] (open)
│   │           └── gt-93iv: Boss wake daemon [P2] (open)
│   └── gt-vdak: (shown above)
```

## Suggested Options

- `--direction=down|up|both` - Show dependents (what this blocks), dependencies (what blocks this), or both
- `--status=open` - Filter to only show issues with a given status
- `--depth=N` - Limit tree depth
- Handle DAG cycles gracefully (show "(shown above)" or similar for already-displayed nodes)

## Use Case

When reorganizing a set of related issues (like I just did with the Boss implementation), being able to visualize the full dependency graph helps verify the structure is correct before syncing.


bd init should refuse when JSONL already has issues (safety guard)

When running `bd init` in a directory with an existing JSONL containing issues, bd should refuse and suggest the correct action instead of proceeding.

## The Problem

Current behavior when database is missing but JSONL exists:
```
$ bd create "test"
Error: no beads database found
Hint: run 'bd init' to create a database...
```

This leads users (and AI agents) to reflexively run `bd init`, which can cause:
- Prefix mismatch if wrong prefix specified
- Data corruption if JSONL is damaged
- Confusion about what actually happened

## Proposed Behavior

```
$ bd init --prefix bd

⚠ Found existing .beads/issues.jsonl with 76 issues.

This appears to be a fresh clone, not a new project.

To hydrate the database from existing JSONL:
  bd doctor --fix

To force re-initialization (may cause data loss):
  bd init --prefix bd --force

Aborting.
```

## Trigger Conditions

- `.beads/issues.jsonl` or `.beads/beads.jsonl` exists
- File contains > 0 valid issue lines
- No `--force` flag provided

## Edge Cases

- Empty JSONL (0 issues) → allow init (new project)
- Corrupted JSONL → warn but allow with confirmation
- Existing `.db` file → definitely refuse (weird state)

## Related

- bd-dmb: Fresh clone should suggest hydration (better error messages)
- bd-4ew: bd doctor should detect fresh clone

This issue is about the safety guard on `bd init` itself, not the error messages from other commands.


Document Claude Code for Web SessionStart hook

Create documentation for using bd in Claude Code for Web:

## Documentation locations
- README.md - Add Claude Code for Web section
- Create docs/CLAUDE_CODE_WEB.md with detailed instructions

## SessionStart hook example
```json
{
  "sessionStart": {
    "script": "npm install -g @beads/bd && bd init --quiet --prefix bd || true"
  }
}
```

## Documentation should cover
- How to configure SessionStart hook in .claude/settings.json
- Verification: Check bd is installed (bd --version)
- Basic workflow in Claude Code for Web
- Troubleshooting common issues
- Note about network restrictions and why npm approach works

## Examples
- Creating issues in web sandbox
- Syncing with git in web environment
- Using MCP server (if applicable)


Import fails on same-content-different-ID instead of treating as update

## Problem

The importer still has rename detection (importer.go:482-500) that triggers when same content hash has different IDs. With hash IDs, this shouldn't happen, but when it does (test data, bugs, legacy data), the import fails:

```
failed to handle rename bd-ce75 -> bd-5a90: rename collision handling removed - should not occur with hash IDs
```

## Current Behavior

1. Importer finds same content hash with different IDs
2. Calls handleRename() (line 490)
3. handleRename() errors out (line 294): "rename collision handling removed"
4. Import fails

## Expected Behavior

Same content hash + different IDs should be treated as an **update**, not a rename:
- Keep existing ID (already in database)
- Update fields if incoming has newer timestamp
- Discard incoming ID (it's wrong - hash should have generated same ID)

## Impact

- Import fails on legitimate edge cases (test data, data corruption)
- Cryptic error message
- Blocks sync operations

## Fix

In handleRename() or import loop, instead of erroring:
```go
// Same content, different ID - treat as update
if incoming.UpdatedAt.After(existing.UpdatedAt) {
    existing.Status = incoming.Status
    // ... copy other fields
    s.UpdateIssue(ctx, existing)
}
result.Updated++
```

## Files
- internal/importer/importer.go:271-294 (handleRename)
- internal/importer/importer.go:482-500 (rename detection)

## Repro
Import JSONL with bd-ce75 and bd-5a90 (both "Test parent issue" but different content hashes).


bd message: Refactor duplicated error messages


Parameterize SQLite busy_timeout in store.go

Modify sqlite.New() to accept configurable busy_timeout.

## Current State
`internal/storage/sqlite/store.go` hardcodes:
```go
connStr = "file:" + path + "?_pragma=foreign_keys(ON)&_pragma=busy_timeout(30000)&..."
```

## Implementation Options

### Option A: Add timeout parameter to New()
```go
func New(ctx context.Context, path string, busyTimeout time.Duration) (*SQLiteStorage, error)
```
Pro: Simple, explicit
Con: Changes function signature (breaking change for callers)

### Option B: Options struct pattern
```go
type Options struct {
    BusyTimeout time.Duration // default 30s
}
func New(ctx context.Context, path string, opts *Options) (*SQLiteStorage, error)
```
Pro: Extensible, nil means defaults
Con: More boilerplate

### Recommendation: Option A with default
```go
func New(ctx context.Context, path string) (*SQLiteStorage, error) {
    return NewWithOptions(ctx, path, 30*time.Second)
}

func NewWithOptions(ctx context.Context, path string, busyTimeout time.Duration) (*SQLiteStorage, error)
```

## Acceptance Criteria
- busy_timeout is parameterized in connection string
- 0 timeout means no waiting (immediate SQLITE_BUSY)
- All existing callers continue to work (via default wrapper)

Part of bd-olc1


Refactor daemon.go into internal/daemonrunner

Extract daemon runtime from daemon.go (1,565 lines) into internal/daemonrunner with focused modules: config.go, daemon.go, process.go, rpc_server.go, sync.go, git.go. Keep cobra command thin.


Add 'town report' command for aggregated swarm status

## Problem
Getting a full swarm status requires running 6+ commands:
- `town list <rig>` for each rig
- `town mail inbox` as Boss
- `bd list --status=open/in_progress` per rig

This is slow and error-prone for both humans and agents.

## Proposed Solution
Add `town report [RIG]` command that aggregates:
- All rigs with polecat states (running/stopped, awake/asleep)
- Boss inbox summary (unread count, recent senders)
- Aggregate issue counts per rig (open/in_progress/blocked)

Example output:
```
=== beads ===
Polecats: 5 (5 running, 0 stopped)
Issues: 20 open, 0 in_progress, 0 blocked

=== gastown ===
Polecats: 6 (4 running, 2 stopped)
Issues: 0 open, 0 in_progress, 0 blocked

=== Boss Mail ===
Unread: 10 | Total: 22
Recent: rictus (21:19), scrotus (21:14), immortanjoe (21:14)
```

## Acceptance Criteria
- [ ] `town report` shows all rigs
- [ ] `town report <rig>` shows single rig detail
- [ ] Output is concise and scannable
- [ ] Completes in <2 seconds


bd doctor should check for multiple DBs, multiple JSONLs, daemon health


Test basic bd commands in WASM (init, create, list)

Compile and verify basic bd functionality works in WASM:
- Test bd init --quiet
- Test bd create with simple issue
- Test bd list --json output
- Verify SQLite database creation and queries work
- Document any runtime issues or workarounds needed


bd message: Fix inefficient client-side filtering for --unread-only


bd doctor: add SQLite integrity check (PRAGMA integrity_check)

Add a database integrity check using SQLite's PRAGMA integrity_check to detect corruption. Currently bd doctor checks schema compatibility but not data integrity. This would help diagnose corrupted databases that pass schema checks but have internal inconsistencies.


bd export only outputs 1 issue after auto-import corrupts database

When auto-import runs and purges issues (due to git history backfill bug), subsequent 'bd export' only exports 1 issue even though the database should have many.

Reproduction:
1. Have issues.jsonl with 55 issues
2. Auto-import triggers and purges all issues via git history backfill
3. Run 'bd export' - only exports 1 issue (the last one created before corruption)

The database gets into an inconsistent state where most issues are purged but export doesn't realize this.

Workaround: Rebuild database from scratch with 'rm .beads/beads.db && bd init --prefix bd'


Deletion propagation via deletions manifest

## Problem

When `bd cleanup -f` or `bd delete` removes issues in one clone, those deletions don't propagate to other clones. The import logic only creates/updates, never deletes. This causes "resurrection" where deleted issues reappear.

## Root Cause

Import sees DB issues not in JSONL and assumes they're "local unpushed work" rather than "intentionally deleted upstream."

## Solution: Deletions Manifest

Add `.beads/deletions.jsonl` - an append-only log of deleted issue IDs with metadata.

### Format
```jsonl
{"id":"bd-xxx","ts":"2025-11-25T10:00:00Z","by":"stevey"}
{"id":"bd-yyy","ts":"2025-11-25T10:05:00Z","by":"claude","reason":"duplicate of bd-zzz"}
```

### Fields
- `id`: Issue ID (required)
- `ts`: ISO 8601 UTC timestamp (required)
- `by`: Actor who deleted (required)
- `reason`: Optional context ("cleanup", "duplicate of X", etc.)

### Import Logic
```
For each DB issue not in JSONL:
  1. Check deletions manifest → if found, delete from DB
  2. Fallback: check git history → if found, delete + backfill manifest
  3. Neither → keep (local unpushed work)
```

### Conflict Resolution
Simultaneous deletions from multiple clones are handled naturally:
- Append-only design means both clones append their deletion records
- On merge, file contains duplicate entries (same ID, different timestamps)
- `LoadDeletions` deduplicates by ID (keeps any/first entry)
- Result: deletion propagates correctly, duplicates are harmless

### Pruning Policy
- Default retention: 7 days (configurable via `deletions.retention_days`)
- Auto-compact during `bd sync` is **opt-in** (disabled by default)
- Hard cap: `deletions.max_entries` (default 50000)
- Git fallback handles pruned entries (self-healing)

### Self-Healing
When git fallback catches a resurrection (pruned entry), it backfills the manifest. One-time git scan cost, then fast again.

### Size Estimates
- ~80 bytes/entry
- 7-day retention with 100 deletions/day = ~56KB
- Git compressed: ~10KB

## Benefits
- ✅ Deletions propagate across clones
- ✅ O(1) lookup (no git scan in normal case)
- ✅ Works in shallow clones
- ✅ Survives history rewrite
- ✅ Audit trail (who deleted what when)
- ✅ Self-healing via git fallback
- ✅ Bounded size via time-based pruning

## References
- Investigation session: 2025-11-25
- Related: bd-2q6d (stale database warnings)


Fix import failure on missing parent issues

Import process fails atomically when JSONL references deleted parent issues. Implement hybrid solution: topological sorting + parent resurrection to handle deleted parents gracefully while maintaining referential integrity. See docs/import-bug-analysis-bd-3xq.md for full analysis.


Enhance bd doctor to suggest reset for broken states

Update bd doctor to detect severely broken states and suggest reset.

## Detection Criteria
Suggest reset when:
- Multiple unfixable errors detected
- Corrupted JSONL that can't be repaired
- Schema version mismatch that can't be migrated
- Daemon state inconsistent and unkillable

## Implementation
Add to doctor's check/fix flow:
```go
if unfixableErrors > threshold {
    suggest('State may be too broken to fix. Consider: bd reset')
}
```

## Output Example
```
✗ Found 5 unfixable errors

  Your beads state may be too corrupted to repair.
  Consider running 'bd reset' to start fresh.
  (Use 'bd reset --backup' to save current state first)
```

## Notes
- Don't auto-run reset, just suggest
- This is lower priority, can be done in parallel with main work


Add command injection prevention tests for git rm in merge command

Test coverage gap identified by automated analysis (vc-217).

**Original Issue:** [deleted:bd-da96-baseline-lint]

In cmd/bd/merge.go:121, exec.Command is called with variable fullPath, flagged by gosec G204 for potential command injection.

Add tests covering:
- File paths with shell metacharacters (;, |, &, $, etc.)
- Paths with spaces and special characters
- Paths attempting command injection (e.g., 'file; rm -rf /')
- Validation that fullPath is properly sanitized
- Only valid git-tracked files can be removed

This is a critical security path preventing arbitrary command execution.

_This issue was automatically created by AI test coverage analysis._


Research Go WASM compilation and modernc.org/sqlite WASM support

Investigate technical requirements for compiling bd to WASM:
- Verify modernc.org/sqlite has working js/wasm support
- Identify Go stdlib limitations in WASM (syscalls, file I/O, etc.)
- Research wasm_exec.js runtime and Node.js integration
- Document any API differences between native and WASM builds


Bug P0


Separate process/lock/PID concerns into process.go

Create internal/daemonrunner/process.go with: acquireDaemonLock, PID file read/write, stopDaemon, isDaemonRunning, getPIDFilePath, socket path helpers, version check.


Update import/export to handle tombstones

Modify importer to read tombstones from issues.jsonl and legacy deletions.jsonl. Modify exporter to write tombstones. Filter tombstoned issues during import. Per design bd-dli.


Auto-push after merge with safety check

Make bd sync a true one-command solution by auto-pushing after successful content merge.

Behavior:
- After successful content merge, auto-push by default
- Safety check: detect when >50% issues vanished AND >5 existed before
- On safety check trigger: warn but still push (do not block happy path)

Vanished means issues removed from issues.jsonl entirely, NOT status=closed (closed is legitimate swarm completion).

Location: internal/syncbranch/worktree.go
Parent issue: bd-3s8


Add sync.branch configuration

Add configuration layer to support sync.branch setting via config file, environment variable, or CLI flag.

Tasks:
- Add sync.branch field to config schema
- Add BEADS_SYNC_BRANCH environment variable
- Add --branch flag to bd init
- Add bd config get/set sync.branch commands
- Validation (branch name format, conflicts)
- Config migration for existing users

Estimated effort: 1-2 days


Run final validation and cleanup checks

Final validation pass to ensure all cleanup objectives met and no regressions introduced.

Validation checklist:
1. Dead code verification: `go run golang.org/x/tools/cmd/deadcode@latest -test ./...`
2. Test coverage: `go test -cover ./...`
3. Build verification: `go build ./cmd/bd/`
4. Linting: `golangci-lint run`
5. Integration tests
6. Metrics verification
7. Git clean check

Final metrics to report:
- LOC removed: ~____
- Files deleted: ____
- Files created: ____
- Test coverage: ____%
- Build time: ____ (before/after)
- Test run time: ____ (before/after)

Impact: Confirms all cleanup objectives achieved successfully

Validation completed:
- LOC: 52,372 lines total
- Dead code: 4 functions in import_shared.go (tracked in bd-6fe4622f)
- Build: ✓ Successful
- Test coverage: ~20-82% across packages
- Test failure: TestTwoCloneCollision (timeout issue)
- Linting: errcheck warnings present (defer close, fmt errors)
- Test time: ~20s

Issues found:
1. bd-6fe4622f: Remove unreachable import functions (renameImportedIssuePrefixes, etc)
2. TestTwoCloneCollision: Daemon killall timeout causing test failure
3. Linting: errcheck violations need fixing


Review multi-repo deletion tracking implementation

Thoroughly review the multi-repo deletion tracking fix (bd-4oob):

Files changed:
- cmd/bd/deletion_tracking.go: Added getMultiRepoJSONLPaths() helper
- cmd/bd/daemon_sync.go: Updated snapshot capture/update logic for multi-repo
- cmd/bd/deletion_tracking_test.go: Added 2 new tests (287 lines)

Review focus areas:
1. Correctness: Does getMultiRepoJSONLPaths() handle all edge cases?
2. Performance: Calling getMultiRepoJSONLPaths() 3x per sync (snapshot capture, merge, base update) - should we cache?
3. Error handling: What if some repos fail snapshot operations but others succeed?
4. Race conditions: Multiple daemons in different repos?
5. Test coverage: Are TestMultiRepoDeletionTracking and TestMultiRepoSnapshotIsolation sufficient?
6. Path handling: Absolute vs relative paths, tilde expansion

This is fresh code - needs careful review before considering deletion tracking production-ready.

Code review completed. Overall assessment: Core deletion tracking logic is sound, but error handling and path handling issues make this not yet production-ready for multi-repo scenarios.

Key findings:

CRITICAL ISSUES (Priority 1):
1. Inconsistent error handling in daemon_sync.go - snapshot/merge fail hard but base update warns. Can leave DB in inconsistent state with no rollback. See bd-sjmr.
2. No path normalization in getMultiRepoJSONLPaths() - tilde expansion, relative paths, duplicates not handled. See bd-iye7.

SHOULD FIX (Priority 2):
3. Missing test coverage for edge cases - empty paths, duplicates, partial failures. See bd-kdoh.
4. Performance - getMultiRepoJSONLPaths() called 3x per sync (minor issue). See bd-we4p.

WHAT WORKS WELL:
- Atomic file operations with PID-based temp files
- Good snapshot isolation between repos
- Race condition protection via exclusive locks
- Solid test coverage for happy path scenarios

VERDICT: Address bd-iye7 and bd-sjmr before considering deletion tracking production-ready for multi-repo mode.

Detailed review notes available in conversation history.


Test exclusive file reservations with two agents

Simulate two agents racing to claim the same issue and verify that exclusive reservations prevent collision.

Acceptance Criteria:
- Agent A reserves bd-123 → succeeds
- Agent B tries to reserve bd-123 → fails with clear error message
- Agent B can see who has the reservation
- Reservation expires after TTL
- Agent B can claim after expiration

Successfully tested file reservations:
- Agent BrownBear reserved bd-123 → granted
- Agent ChartreuseHill tried same → conflicts returned
- System correctly prevents collision


Implement backup functionality for reset

Add backup capability that can be used by reset command.

## Functionality
- Copy .beads/ to .beads-backup-{timestamp}/
- Timestamp format: YYYYMMDD-HHMMSS
- Preserve file permissions
- Return backup path for user feedback

## Location
`internal/reset/backup.go` - keep with reset package for now (YAGNI)

## Interface
```go
func CreateBackup(beadsDir string) (backupPath string, err error)
```

## Notes
- Simple recursive file copy, no compression needed
- Error if backup dir already exists (unlikely with timestamp)
- Backup directories SHOULD be gitignored
- Add `.beads-backup-*/` pattern to .beads/.gitignore template in doctor package
- Consider: ListBackups() for future `bd backup list` command (not for this PR)


Event-driven daemon architecture

Replace 5-second polling sync loop with event-driven architecture that reacts instantly to changes. Eliminates stale data issues while reducing CPU ~60%. Key components: FileWatcher (fsnotify), Debouncer (500ms), RPC mutation events, optional git hooks. Target latency: <500ms (vs 5000ms). See event_driven_daemon.md for full design.

Production-ready after 3 critical fixes (commit 349b892):
- Skip redundant imports (mtime check prevents self-trigger loops)
- Add server.Stop() in serverErrChan case (clean shutdown)
- Fallback ticker (60s) when watcher unavailable (ensures remote sync)

Ready to make default after integration test (bd-1f4086c5.1) passes.


Extract daemon sync functions to daemon_sync.go


bd detect-pollution - Test pollution detector

Detect test issues that leaked into production DB.

Pattern matching for:
- Titles starting with 'test', 'benchmark', 'sample'
- Sequential numbering (test-1, test-2)
- Generic descriptions
- Created in rapid succession

Optional AI scoring for confidence.

Files: cmd/bd/detect_pollution.go (new)


Issue 1 to reopen


Add unit tests for reset package

Comprehensive unit tests for internal/reset package.

## Test Cases

### ValidateState tests
- .beads/ exists → success
- .beads/ missing → appropriate error
- git dirty state detection

### CountImpact tests
- Empty .beads/ → zero counts
- With issues → correct count (open vs closed)
- With tombstones → correct count
- Returns HasUncommitted correctly

### Backup tests
- Creates backup with correct timestamp format
- Preserves all files and permissions
- Returns correct path
- Handles missing .beads/ gracefully
- Errors on pre-existing backup dir

### Git operation tests
- CheckGitState detects dirty, detached, not-a-repo
- GitRemoveBeads removes correct files
- GitCommitReset creates commit with message
- Operations skip gracefully when not in git repo

### Reset tests (with mocks/temp dirs)
- Soft reset removes files, calls init
- Hard reset includes git operations
- Dry run doesn't modify anything
- SkipInit flag prevents re-initialization
- Daemon killall is called
- Backup is created when requested

## Approach
- Can start with interface definitions (TDD style)
- Use testify for assertions
- Create temp directories for isolation
- Mock git operations where needed
- Test completion depends on implementation tasks

## File Location
`internal/reset/reset_test.go`
`internal/reset/backup_test.go`
`internal/reset/git_test.go`


Document sync.require_confirmation_on_mass_delete config option


Expand checkHooksQuick to verify all hook versions

Currently checkHooksQuick only checks post-merge hook version. Should also check pre-commit, pre-push, and post-checkout for completeness. Keep it lightweight but catch more outdated hooks.


Fix default .beads/.gitignore to ignore merge artifacts (GH #274)

Updated the default .gitignore template created by `bd init` to properly ignore merge artifacts and fix overly broad patterns.

Changes:
- Added `*.db?*` pattern for database files with query strings
- Added explicit patterns for merge artifacts: beads.{base,left,right}.{jsonl,meta.json}
- Changed `!*.jsonl` to `!issues.jsonl` to avoid including merge artifact JSONL files

This fixes GitHub issue #274 reported by rscorer.


Test sync branch setup


Workaround for FastMCP outputSchema bug in Claude Code

The beads MCP server (v0.23.1) successfully connects to Claude Code, but all tools fail to load with a schema validation error due to a bug in FastMCP 2.13.1.

Error: "Invalid literal value, expected \"object\"" in outputSchema.

Root Cause: FastMCP generates outputSchema with $ref at root level without "type": "object" for self-referential models (Issue).

Workaround: Use slash commands (/beads:ready) or wait for FastMCP fix.


Daemons don't exit when parent process dies, causing accumulation and race conditions

Multiple daemon processes accumulate over time because daemons don't automatically stop when their parent process (e.g., coding agent) is killed. This causes:

1. Race conditions: 8+ daemons watching same .beads/beads.db, each with own 30s debounce timer
2. Git conflicts: Multiple daemons racing to commit/push .beads/issues.jsonl
3. Resource waste: Orphaned daemons from sessions days/hours old still running

Example: User had 8 daemons from multiple sessions (12:37AM, 7:20PM, 7:22PM, 7:47PM, 9:19PM yesterday + 9:54AM, 10:55AM today).

Solutions to consider:
1. Track parent PID and exit when parent dies
2. Use single global daemon instead of per-session
3. Document manual cleanup: pkill -f "bd daemon"
4. Add daemon lifecycle management (auto-cleanup of stale daemons)

Implementation complete:

1. Added ParentPID field to DaemonLockInfo struct (stored in daemon.lock JSON)
2. Daemon now tracks parent PID via os.Getppid() at startup
3. Both event loops (polling and event-driven) check parent process every 10 seconds
4. Daemon gracefully exits if parent process dies (detected via isProcessRunning check)
5. Handles edge cases:
   - ParentPID=0: Older daemons without tracking (ignored)
   - ParentPID=1: Adopted by init means parent died (exits)
   - Otherwise checks if parent process is still running

The fix prevents daemon accumulation by ensuring orphaned daemons automatically exit within 10 seconds of parent death.


Add AI planning docs management guidance to bd onboard (GH-196)

Enhanced bd onboard command to provide guidance for managing AI-generated planning documents (Claude slop).

Addresses GitHub issue #196: https://github.com/steveyegge/beads/issues/196

Changes:
- Added Managing AI-Generated Planning Documents section to bd onboard
- Recommends using history/ directory for ephemeral planning files
- Updated AGENTS.md to demonstrate the pattern
- Added comprehensive tests

Commit: d46177d


Audit Current Cache Usage

Understand exactly what code depends on the storage cache

AUDIT COMPLETE

getStorageForRequest() callers: 17 production + 11 test
- server_issues_epics.go: 8 calls
- server_labels_deps_comments.go: 4 calls
- server_export_import_auto.go: 2 calls
- server_compact.go: 2 calls
- server_routing_validation_diagnostics.go: 1 call
- server_eviction_test.go: 11 calls (DELETE entire file)

Pattern everywhere: store, err := s.getStorageForRequest(req) → store := s.storage

req.Cwd usage: Only for multi-repo routing. Local daemon always serves 1 repo, so routing is unused.

MCP server: Uses separate daemons per repo (no req.Cwd usage found). NOT affected by cache removal.

Cache env vars to deprecate:
- BEADS_DAEMON_MAX_CACHE_SIZE (used in server_core.go:63)
- BEADS_DAEMON_CACHE_TTL (used in server_core.go:72)
- BEADS_DAEMON_MEMORY_THRESHOLD_MB (used in server_cache_storage.go:47)

Server struct fields to remove:
- storageCache, cacheMu, maxCacheSize, cacheTTL, cleanupTicker, cacheHits, cacheMisses

Tests to delete:
- server_eviction_test.go (entire file - 9 tests)
- limits_test.go cache assertions

Special consideration: ValidateDatabase endpoint uses findDatabaseForCwd() outside cache. Verify if used, then remove or inline.

Safe to proceed with removal - cache always had 1 entry in local daemon model.


Add mutation channel to internal/rpc/server.go

Add mutationChan chan MutationEvent to Server struct. Emit events on CreateIssue, UpdateIssue, DeleteIssue, AddComment. Non-blocking send with default case for full channel.


Design contributor namespace isolation for beads pollution prevention

## Problem

When contributors work on beads-the-project using beads-the-tool, their personal work-tracking issues leak into PRs. The .beads/issues.jsonl is intentionally tracked (it's the project's issue database), but contributors' local issues pollute the diff.

This is a recursion problem unique to self-hosting projects.

## Possible Solutions to Explore

1. **Contributor namespaces** - Each contributor gets a private prefix (e.g., `bd-steve-xxxx`) that's gitignored or filtered
2. **Separate database** - Contributors use BEADS_DIR pointing elsewhere for personal tracking
3. **Issue ownership/visibility flags** - Mark issues as "local-only" vs "project"
4. **Prefix-based filtering** - Configure which prefixes are committed vs ignored

## Design Considerations

- Should be zero-friction for contributors (no manual setup)
- Must not break existing workflows
- Needs to work with sync/collaboration features
- Consider: what if a "personal" issue graduates to "project" issue?

## Expansion Needed

This is a placeholder. Needs detailed design exploration before implementation.


Add error handling test for cmd.Help() in search command

Test coverage gap identified by automated analysis (vc-217).

**Original Issue:** [deleted:bd-da96-baseline-lint]

In cmd/bd/search.go:39, the return value of cmd.Help() is not checked, flagged by errcheck linter.

Add test to verify:
- Error handling when cmd.Help() fails (e.g., output redirection fails)
- Proper error propagation to caller
- Command still exits gracefully on help error

This ensures the search command handles help errors properly and doesn't silently ignore failures.

_This issue was automatically created by AI test coverage analysis._


BG's issue to reopen


Auto-configure git merge driver during `bd init`

Enhance `bd init` to optionally set up beads-merge as git merge driver.

**Tasks**:
- Prompt user to install git merge driver
- Configure `.git/config`: `merge.beads.driver "bd merge %A %O %L %R"`
- Create/update `.gitattributes`: `.beads/beads.jsonl merge=beads`
- Add `--skip-merge-driver` flag for non-interactive use
- Update AGENTS.md onboarding section

**Files**:
- `cmd/bd/init.go`
- `.gitattributes` template


Clarify JSONL size bounds with multi-repo

The contributor-workflow-analysis.md states (line 226): 'Keep beads.jsonl small enough for agents to read (<25k)'

With multi-repo hydration, it's unclear whether this bound applies to:
- Each individual JSONL file (likely intention)
- The total hydrated size across all repos (unclear)
- Both (most conservative)

Clarification needed because:
- VC monitors .beads/issues.jsonl size to stay under limit
- With multi-repo, VC needs to know if each additional repo also has 25k limit
- Agents reading hydrated data need to know total size bounds
- Performance characteristics depend on total vs per-repo limits

Example scenario:
- Primary repo: 20k JSONL
- Planning repo: 15k JSONL
- Total hydrated: 35k
Is this acceptable or does it violate the <25k principle?


bd validate - Comprehensive health check

Run all validation checks in one command.

Checks:
- Duplicates
- Orphaned dependencies
- Test pollution
- Git conflicts

Supports --fix-all for auto-repair.

Depends on bd-cbed9619.1, bd-0dcea000, bd-31aab707, bd-9826b69a.

Files: cmd/bd/validate.go (new)


Exclude tombstones from SearchIssues by default

SearchIssues() returns tombstones if they match search criteria. Per design, users generally shouldn't see deleted issues in search results.

Location: internal/storage/sqlite/queries.go:1155-1311 and transaction.go:887-1044

Options:
1. Add default tombstone exclusion unless explicitly filtering for them
2. Add IncludeTombstones field to IssueFilter

Recommendation: Add 'status != tombstone' to WHERE clause unless filter.Status == StatusTombstone


Tombstone export includes tombstones even with --status filter

In export.go, we set IncludeTombstones: true unconditionally. However, if a user runs:

  bd export --status=open

They might not expect tombstones in the output. The IncludeTombstones flag should probably only be set when no status filter is specified, or when --status=tombstone is explicitly requested.

Current behavior: exports tombstones regardless of status filter
Expected behavior: respect status filter, only include tombstones when explicitly requested or no filter


Fix autoimport tests for content-hash collision scoring

## Overview
Three autoimport tests are failing after [deleted:bd-cbed9619.4] because they expect behavior based on the old reference-counting collision resolution, but the system now uses deterministic content-hash scoring.

## Failing Tests
1. `TestAutoImportMultipleCollisionsRemapped` - expects local versions preserved
2. `TestAutoImportAllCollisionsRemapped` - expects local versions preserved
3. `TestAutoImportCollisionRemapMultipleFields` - expects specific collision resolution behavior

## Root Cause
These tests were written when ScoreCollisions used reference counting to determine which version to keep. Now it uses content-hash comparison (introduced in commit 2e87329), which produces different but deterministic results.

## Example
Old behavior: Issue with more references would be kept
New behavior: Issue with lexicographically lower content hash is kept

## Solution
Update each test to:
1. Verify the new content-hash based behavior is correct
2. Check that the remapped issue (not necessarily local/remote) has the expected content
3. Ensure dependencies are preserved on the correct remapped issue

## Acceptance Criteria
- All three autoimport tests pass
- Tests verify content-hash determinism (same collision always resolves the same way)
- Tests check dependency preservation on remapped issues
- Test documentation explains content-hash scoring expectations

## Files to Modify
- `cmd/bd/autoimport_collision_test.go`

## Testing
Run: `go test ./cmd/bd -run "TestAutoImport.*Collision" -v`


Test issue 2


TestImportIssues_LegacyDeletionsConvertedToTombstones is failing

The test TestImportIssues_LegacyDeletionsConvertedToTombstones in internal/importer/importer_test.go is failing:

Expected 3 created (1 regular + 2 tombstones from deletions.jsonl), got 2
Expected tombstone for test-deleted2 not found

The test expects legacy deletions.jsonl entries to be converted to tombstones during import, but test-deleted2 is not being converted.

Location: internal/importer/importer_test.go:1344


Add docs/architecture/event_driven.md

Copy event_driven_daemon.md into docs/ folder. Add to documentation index.


Create backup and restore procedures

Disaster recovery procedures for Agent Mail data.

Acceptance Criteria:
- Automated daily snapshots (GCP persistent disk)
- SQLite backup script
- Git repository backup
- Restore procedure documentation
- Test restore from backup

File: deployment/agent-mail/backup.sh


Remove Storage Cache from Server Struct

Eliminate cache fields and use s.storage directly


~/src/beads daemon has 'sql: database is closed' errors - zombie daemon


Document 3-clone ID non-determinism in collision resolution

Document the known behavior of 3+ way collision resolution where ID assignments may vary based on sync order, even though content always converges correctly.

Updates needed:
- Update bd-71107098 notes to mark 2-clone case as solved
- Document 3-clone ID non-determinism as known limitation
- Add explanation to ADVANCED.md or collision resolution docs
- Explain why this happens (pairwise hash comparison is deterministic, but multi-way ID allocation uses sync-order dependent counters)
- Clarify trade-offs: content convergence ✅ vs ID stability ❌

Key points to document:
- Hash-based resolution is pairwise deterministic
- Content always converges correctly (all issues present with correct data)
- Numeric ID assignments in 3+ way collisions depend on sync order
- This is acceptable for most use cases (content convergence is primary goal)
- Full determinism would require complex multi-way comparison


bd-hv01: Missing cleanup of .merged temp file on failure

Problem: deletion_tracking.go:49 creates tmpMerged file but does not clean up on failure, causing disk space leak and potential interference with subsequent syncs.

Fix: Add defer os.Remove(tmpMerged) after creating temp file path.

Files: cmd/bd/deletion_tracking.go:38-89


Code Review Sweep: thorough

Perform thorough code review sweep based on accumulated activity.

**AI Reasoning:**
Significant code activity with 7608 lines added and 120 files changed indicates substantial modifications. Multiple high-churn areas (cmd/bd, internal/rpc) suggest potential for subtle issues and emerging patterns that warrant review.

**Scope:** thorough
**Target Areas:** cmd/bd, internal/rpc, .beads
**Estimated Files:** 12
**Estimated Cost:** $5

**Task:**
Review files for non-obvious issues that agents miss during focused work:
- Inefficiencies (algorithmic, resource usage)
- Subtle bugs (race conditions, off-by-one, copy-paste)
- Poor patterns (coupling, complexity, duplication)
- Missing best practices (error handling, docs, tests)
- Unnamed anti-patterns

File discovered issues with detailed reasoning and suggestions.


bd-hv01: Race condition with concurrent snapshot operations

## Problem
Snapshot files have no locking. Multiple processes can call captureLeftSnapshot simultaneously:

1. Process A: export → begins snapshot
2. Process B: export → begins snapshot
3. Process A: writes partial left.jsonl
4. Process B: overwrites with its left.jsonl
5. Process A: completes merge with wrong snapshot

## Impact
- Data corruption in multi-process scenarios
- Daemon + manual sync race
- Multiple git clones on same filesystem

## Fix
Use atomic file operations with process-specific temp files:
```go
func captureLeftSnapshot(jsonlPath string) error {
    _, leftPath := getSnapshotPaths(jsonlPath)
    tempPath := fmt.Sprintf("%s.%d.tmp", leftPath, os.Getpid())
    if err := copyFileSnapshot(jsonlPath, tempPath); err != nil {
        return err
    }
    return os.Rename(tempPath, leftPath) // Atomic on POSIX
}
```

## Files Affected
- cmd/bd/deletion_tracking.go:24-29 (captureLeftSnapshot)
- cmd/bd/deletion_tracking.go:31-36 (updateBaseSnapshot)


Baseline quality gate failure: test

The test quality gate is failing on the baseline (main branch).

This blocks the executor from claiming work until fixed.

Error: go test failed: exit status 1

Output:
```
?   	github.com/steveyegge/beads	[no test files]
# github.com/steveyegge/beads/internal/beads_test [github.com/steveyegge/beads/internal/beads.test]
internal/beads/routing_integration_test.go:142:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
# github.com/steveyegge/beads/internal/compact [github.com/steveyegge/beads/internal/compact.test]
internal/compact/compactor_test.go:17:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
# github.com/steveyegge/beads/cmd/bd [github.com/steveyegge/beads/cmd/bd.test]
cmd/bd/integrity_content_test.go:31:32: undefined: ctx
cmd/bd/integrity_content_test.go:183:32: undefined: ctx
FAIL	github.com/steveyegge/beads/cmd/bd [build failed]
# github.com/steveyegge/beads/internal/daemon [github.com/steveyegge/beads/internal/daemon.test]
internal/daemon/discovery_test.go:21:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/daemon/discovery_test.go:59:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/daemon/discovery_test.go:232:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
# github.com/steveyegge/beads/internal/importer [github.com/steveyegge/beads/internal/importer.test]
internal/importer/external_ref_test.go:22:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/external_ref_test.go:106:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/external_ref_test.go:197:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/external_ref_test.go:295:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/importer_test.go:566:27: not enough arguments in call to sqlite.New
	have (st
... (truncated, see full output in logs)
```

Released by executor after budget limit hit. Tests were already fixed manually. Issue can be closed when tests are verified to pass.


Implement hash ID generation in CreateIssue

Replace sequential ID generation with hash-based IDs in CreateIssue function.

## Current Behavior (internal/storage/sqlite/sqlite.go)
```go
func (s *SQLiteStorage) CreateIssue(ctx context.Context, issue *types.Issue) error {
    // ID comes from auto-increment counter
    // Collisions possible across clones
}
```

## New Behavior
```go
func (s *SQLiteStorage) CreateIssue(ctx context.Context, issue *types.Issue) error {
    // Generate hash ID if not provided
    if issue.ID == "" {
        issue.ID = idgen.GenerateHashID(
            issue.Title,
            issue.Description,
            time.Now(),
            s.workspaceID,
        )
    }

    // Assign next alias
    issue.Alias = s.getNextAlias()

    // Insert with hash ID + alias
    // ...
}
```

## Workspace ID Generation
Add to database initialization:
```go
// Generate stable workspace ID (persisted in .beads/workspace_id)
workspaceID := getOrCreateWorkspaceID()
```

Options for workspace ID:
1. Hostname + random suffix
2. UUID (random)
3. Git remote URL hash (deterministic per repo)

Recommended: Option 3 (git remote hash) for reproducibility

## Hash Collision Detection
```go
// On insert, check for collision (unlikely but possible)
existing, err := s.GetIssue(ctx, issue.ID)
if err == nil {
    // Hash collision! Add random suffix and retry
    issue.ID = issue.ID + "-" + randomSuffix(4)
}
```

## Files to Create/Modify
- internal/types/id_generator.go (new)
- internal/storage/sqlite/sqlite.go (CreateIssue)
- internal/storage/sqlite/workspace.go (new - workspace ID management)
- .beads/workspace_id (new file, git-ignored)

## Testing
- Test hash ID generation is deterministic
- Test collision detection and retry
- Test workspace ID persistence
- Benchmark: hash generation performance (<1μs)


isLikelyHash rejects 3-char all-letter base36 hashes

ExtractIssuePrefix fails for multi-hyphen prefixes when the 3-char hash suffix has no digits.

Example: `xa-adt-bat` returns prefix `xa` instead of `xa-adt`.

Root cause: `isLikelyHash()` requires at least one digit to distinguish hashes from English words, but base36 hashes can be all-letters by chance.

Affected: 20 issues in xa-adapt with suffixes like bat, dev, fbi, oil, etc.


Add "bd daemons" command for multi-daemon management

Add a new "bd daemons" command with subcommands to manage daemon processes across all beads repositories/worktrees. Should show all running daemons with metadata (version, workspace, uptime, last sync), allow stopping/restarting individual daemons, auto-clean stale processes, view logs, and show exclusive lock status.


Add export test verifying tombstones are included in JSONL output

The export now includes tombstones (bd-dve) but there's no test that:
1. Creates issues in DB including a tombstone
2. Runs export
3. Verifies the JSONL contains the tombstone with all fields

Add a test: TestExportIncludesTombstones


Add .beads/README.md during 'bd init' for project documentation and promotion

When 'bd init' is run, automatically generate a .beads/README.md file that:

1. Briefly explains what Beads is (AI-native issue tracking that lives in your repo)
2. Links to the main repository: https://github.com/steveyegge/beads
3. Provides a quick reference of essential commands:
   - bd create: Create new issues
   - bd list: View all issues
   - bd update: Modify issue status/details
   - bd show: View issue details
   - bd sync: Sync with git remote
4. Highlights key benefits for AI coding agents and developers
5. Encourages developers to try it out

The README should be enthusiastic and compelling to get open source contributors excited about using Beads for their AI-assisted development workflows.


CLI tests (cli_fast_test.go) are slow and should be integration tests

The TestCLI_* tests in cmd/bd/cli_fast_test.go are taking 4-5 seconds each (40+ seconds total), making them the slowest part of the fast test suite.

Current timings:
- TestCLI_Import: 4.73s
- TestCLI_Blocked: 4.33s
- TestCLI_DepTree: 4.15s
- TestCLI_Close: 3.59s
- TestCLI_DepAdd: 3.50s
- etc.

These tests compile the bd binary once in init(), but then execute it multiple times per test with filesystem operations. Despite being named "fast", they're actually end-to-end CLI integration tests.

Options:
1. Tag with //go:build integration (move to integration suite)
2. Optimize: Use in-memory databases, reduce exec calls, better parallelization
3. Keep as-is but understand they're the baseline for "fast" tests

Total test suite currently: 13.8s (cmd/bd alone is 12.8s, and most of that is these CLI tests)

Fixed by reusing existing bd binary from repo root instead of rebuilding.

Before: 15+ minutes (rebuilding binary for every test package)
After: ~12 seconds (reuses pre-built binary)

The init() function now checks for ../../bd first before falling back to building. This means `go build && go test` is now fast.


Document sandbox workarounds for GH #353

Add documentation for sandbox troubleshooting and new flags.

**Tasks:**
1. Create or update TROUBLESHOOTING.md with sandbox section
2. Document new flags in CLI reference
3. Add comment to GH #353 with immediate workarounds

**Content needed:**
- Symptoms of daemon lock issues in sandboxed environments
- Usage guide for --sandbox, --force, and --allow-stale flags
- Step-by-step troubleshooting for Codex users
- Examples of each escape hatch

**Files to update:**
- docs/TROUBLESHOOTING.md (create if needed)
- docs/CLI_REFERENCE.md or README.md
- GitHub issue #353

**References:**
- docs/GH353_INVESTIGATION.md (lines 240-276)


Config option sync.require_confirmation_on_mass_delete

Add config option for paranoid users who want confirmation before pushing after mass deletion.

Option: sync.require_confirmation_on_mass_delete
Default: false

When enabled AND safety check triggers:
- Prompt user for confirmation before pushing
- Show them what would be pushed

For users who have been burned and want extra safety. Most users will not need this.

Location: internal/config/ and internal/syncbranch/worktree.go
Parent issue: bd-3s8


Remove Daemon Storage Cache

The daemon's multi-repo storage cache is the root cause of stale data bugs. Since global daemon is deprecated, we only ever serve one repository, making the cache unnecessary complexity. This epic removes the cache entirely for simpler, more reliable direct storage access.


Publish bd-wasm to npm

Package and publish WASM build to npm. Child of epic bd-44d0.

## Tasks
- [ ] Optimize WASM bundle (compression)
- [ ] Create README for npm package
- [ ] Set up npm publishing workflow
- [ ] Publish v0.1.0-alpha
- [ ] Test installation in clean environment
- [ ] Update beads AGENTS.md with installation instructions

## Package Name
bd-wasm (or @beads/wasm-cli)


Test FK constraint via close


bd export should verify JSONL line count matches database count

After export completes, bd should verify that the JSONL file line count matches the number of issues exported. This would catch silent failures where the export appears to succeed but doesn't actually write all issues.

Real-world scenario from VC project:
- Ran direct SQL DELETE to remove 240 issues
- Ran 'bd export -o .beads/issues.jsonl'
- No error shown, appeared to succeed
- But JSONL file was not updated (still had old line count)
- Later session found all 240 issues still in JSONL
- Had to repeat the cleanup

If export had verified line count, it would have immediately shown:
  Error: Export verification failed
    Expected: 276 issues
    JSONL file: 516 lines
    Mismatch indicates export failed to write all issues

This is especially important because:
1. JSONL is source of truth in git
2. Silent export failures cause data inconsistency
3. Users assume export succeeded if no error shown
4. The verification is cheap (just count lines)

Implementation:
- After writing JSONL, count lines in file
- Compare to len(exportedIDs)
- If mismatch, remove temp file and return error
- Show clear error message with both counts


PushSyncBranch may fail if worktree was cleaned up


Stealth mode global gitignore should use absolute project path

**GitHub Issue:** #538

**Problem:**
`bd init --stealth` adds `.beads/` to the global gitignore, which ignores ALL `.beads/` folders across all repositories. Users who want stealth mode in one project but open beads usage in others are blocked.

**Solution:**
Change stealth mode to use absolute paths instead of generic patterns:

**Before (current):**
```
# Beads stealth mode configuration (added by bd init --stealth)
.beads/
.claude/settings.local.json
```

**After (proposed):**
```
# Beads stealth mode: /Users/foo/work-project (added by bd init --stealth)
/Users/foo/work-project/.beads/
/Users/foo/work-project/.claude/settings.local.json
```

**Implementation:**
1. Modify `setupGlobalGitIgnore()` in `cmd/bd/init.go`
2. Get current working directory (absolute path)
3. Use absolute path patterns instead of generic ones
4. Update comment to show which project the entry is for

**Tradeoffs:**
- If project directory moves, gitignore entry becomes stale (acceptable - user can re-run `bd init --stealth`)
- Multiple stealth projects = multiple entries (works correctly)

**Testing:**
- Verify absolute path is added to global gitignore
- Verify other projects' .beads/ folders are NOT ignored
- Test with existing global gitignore file
- Test creating new global gitignore file


wish: list & ready show issues as hierarchy tree

`bd ready` and `bd list` just show a flat list, and it's up to the reader to parse which ones are dependent or sub-issues of others. It would be much easier to understand if they were shown in a tree format


Auto-detect scenarios and prompt users

Detect when user is in fork/contributor scenario and prompt with helpful suggestions. Check: git remote relationships, existing .beads config, repo ownership. Suggest appropriate wizard.


Add t.Parallel() to slow hash multiclone tests

Add t.Parallel() to TestHashIDs_MultiCloneConverge and TestHashIDs_IdenticalContentDedup so they run concurrently.

Expected savings: ~10 seconds (from 20s to ~11s)

Implementation:
- Add t.Parallel() call at start of each test function
- Verify tests don't share resources that would cause conflicts
- Run tests to confirm they work in parallel

File: beads_hash_multiclone_test.go:34, :101


Upgrade notification persists after running suggested commands

The upgrade notification kept showing even after running 'bd upgrade review' and 'bd doctor' as suggested.

Expected: Notification should be dismissed after running either/both commands
Actual: Notification persisted on every bd command

Investigation findings:
- metadata.json correctly shows last_bd_version=0.28.0
- The notification stopped appearing after a few more invocations
- May be related to daemon caching or a race condition
- The 'upgradeAcknowledged' flag in version_tracking.go:115 only persists per-session (in-memory)

Possible causes:
1. Daemon vs direct mode inconsistency - daemon may have stale version info
2. The version is checked/updated before daemon connection, but daemon has cached state
3. Race between trackBdVersion() and daemon startup

Status: May have resolved itself, but root cause unclear. Close if no longer reproducible.


GH#146: No color showing in terminal for some users

User reports color not working in macOS (Taho 26.0.1) with iTerm 3.6.4 and Terminal.app, despite color working elsewhere in terminal. Python rich and printf escape codes work.

Need to investigate:
- Is NO_COLOR env var set?
- Terminal type detection?
- fatih/color library configuration
- Does bd list show colors? bd ready? bd init?
- What's the output of: echo $TERM, echo $NO_COLOR


Test: N-clone scenario with hash IDs (no collisions)

Comprehensive test to verify hash IDs eliminate collision problems.

## Test: TestHashIDsNClones

### Purpose
Verify that N clones can work offline and sync without ID collisions using hash IDs.

### Test Scenario
```
Setup:
- 1 bare remote repo
- 5 clones (A, B, C, D, E)

Offline Work:
- Each clone creates 10 issues with different titles
- No coordination, no network access
- Total: 50 unique issues

Sync:
- Clones sync in random order
- Each pull/import other clones' issues

Expected Result:
- All 5 clones converge to 50 issues
- Zero ID collisions
- Zero remapping needed
- Alias conflicts resolved deterministically
```

### Implementation
File: cmd/bd/beads_hashid_test.go (new)

```go
func TestHashIDsFiveClones(t *testing.T) {
    tmpDir := t.TempDir()
    remoteDir := setupBareRepo(t, tmpDir)

    // Setup 5 clones
    clones := make(map[string]string)
    for _, name := range []string{"A", "B", "C", "D", "E"} {
        clones[name] = setupClone(t, tmpDir, remoteDir, name)
    }

    // Each clone creates 10 issues offline
    for name, dir := range clones {
        for i := 0; i < 10; i++ {
            createIssue(t, dir, fmt.Sprintf("%s-issue-%d", name, i))
        }
        // No sync yet!
    }

    // Sync in random order
    syncOrder := []string{"C", "A", "E", "B", "D"}
    for _, name := range syncOrder {
        syncClone(t, clones[name], name)
    }

    // Final convergence round
    for _, name := range []string{"A", "B", "C", "D", "E"} {
        finalPull(t, clones[name], name)
    }

    // Verify all clones have all 50 issues
    for name, dir := range clones {
        issues := getIssues(t, dir)
        if len(issues) != 50 {
            t.Errorf("Clone %s: expected 50 issues, got %d", name, len(issues))
        }

        // Verify all issue IDs are hash-based
        for _, issue := range issues {
            if !strings.HasPrefix(issue.ID, "bd-") || len(issue.ID) != 11 {
                t.Errorf("Invalid hash ID: %s", issue.ID)
            }
        }
    }

    // Verify no collision resolution occurred
    // (This would be in logs if it happened)

    t.Log("✓ All 5 clones converged to 50 issues with zero collisions")
}
```

### Edge Case Tests

#### Test: Hash Collision Detection (Artificial)
```go
func TestHashCollisionDetection(t *testing.T) {
    // Artificially inject collision by mocking hash function
    // Verify system detects and handles it
}
```

#### Test: Alias Conflicts Resolved Deterministically
```go
func TestAliasConflictsNClones(t *testing.T) {
    // Two clones assign same alias to different issues
    // Verify deterministic resolution (content-hash ordering)
    // Verify all clones converge to same alias assignments
}
```

#### Test: Mixed Sequential and Hash IDs (Should Fail)
```go
func TestMixedIDsRejected(t *testing.T) {
    // Try to import JSONL with sequential IDs into hash-ID database
    // Verify error or warning
}
```

### Performance Test

#### Benchmark: Hash ID Generation
```go
func BenchmarkHashIDGeneration(b *testing.B) {
    for i := 0; i < b.N; i++ {
        GenerateHashID("title", "description", time.Now(), "workspace-id")
    }
}

// Expected: < 1μs per generation
```

#### Benchmark: N-Clone Convergence Time
```go
func BenchmarkNCloneConvergence(b *testing.B) {
    for _, n := range []int{3, 5, 10, 20} {
        b.Run(fmt.Sprintf("N=%d", n), func(b *testing.B) {
            // Measure total convergence time
        })
    }
}

// Expected: Linear scaling O(N)
```

### Acceptance Criteria
- TestHashIDsFiveClones passes reliably (10/10 runs)
- Zero ID collisions in any scenario
- All clones converge in single round (not multi-round like old system)
- Alias conflicts resolved deterministically
- Performance benchmarks meet targets (<1μs hash gen)

## Files to Create
- cmd/bd/beads_hashid_test.go

## Comparison to Old System
This test replaces:
- TestTwoCloneCollision (bd-71107098) - no longer needed
- TestThreeCloneCollision (bd-cbed9619) - no longer needed
- TestFiveCloneCollision (bd-a40f374f) - no longer needed

Old system required complex collision resolution and multi-round convergence.
New system: single-round convergence with zero collisions.


CRITICAL: bd sync exports before pull, allowing stale DB to corrupt JSONL statuses

## Root Cause

The fix in bd-53c (reverse ZFC check) only checks COUNTS, not content. The real corruption happens when:

1. Polecat A has stale DB with old status values (e.g., status=closed for issues that are now open on remote)
2. Polecat A runs bd sync:
   - **Export FIRST**: DB (status=closed) → JSONL (overwrites correct status=open)
   - Commit: Stale JSONL committed
   - Pull: 3-way merge with remote
   - Merge uses 'closed wins' rule → status stays closed
3. Polecat A pushes → Remote now corrupted with status=closed

## Why bd-53c didn't fix it

The reverse ZFC check compares COUNTS:
```go
if jsonlCount > dbCount  // Only catches count mismatch
```

But in the corruption scenario:
- JSONL count = 5, DB count = 5 (same count!)
- Only the STATUS field differs

## The Real Fix

**PULL BEFORE EXPORT**. The sync order must be:
1. Pull from remote (get latest state)
2. Import merged JSONL to DB
3. THEN export DB changes (if any)

Current order is: Export → Commit → Pull → Import → Push

This is a fundamental architecture change to the sync flow.

## Workaround

Use --no-auto-flush and manually control the sync order, or disable daemon auto-export.

## Evidence

From user investigation:
- At 595b7943 (13:20:30): 5 open issues
- At 10239812 (13:28:39): 0 open issues
- All 5 issues had their status changed from open to closed
- Count stayed at 5 (not a deletion issue)


Add error handling guidance for export metadata update failures

## Problem
The bd-ymj fix treats all metadata update failures as warnings:

```go
if err := store.SetMetadata(ctx, "last_import_hash", currentHash); err != nil {
    log.log("Warning: failed to update last_import_hash: %v", err)
}
```

But if metadata updates fail, the NEXT export will fail with "JSONL content has changed since last import".

## Questions
1. Should metadata failures be critical (return error)?
2. Should we implement retry logic?
3. Is warning acceptable (safe, just requires import before next export)?

## Current Behavior
- Metadata failure is silent (only logged)
- User won't know until next export fails
- Next export requires import first (safe but annoying)

## Recommendation
Add clear comment explaining the trade-off:

```go
// Note: Metadata update failures are treated as warnings, not errors.
// This is acceptable because the worst case is the next export will
// require an import first, which is safe and prevents data loss.
// Alternative: Make this critical and fail the export if metadata
// updates fail (but this makes exports more fragile).
if err := store.SetMetadata(ctx, "last_import_hash", currentHash); err != nil {
    log.log("Warning: failed to update last_import_hash: %v", err)
    log.log("Next export may require running 'bd import' first")
}
```

## Files
- cmd/bd/daemon_sync.go

## Decision Needed
Choose approach based on failure mode preferences


GH#245: Windows MCP subprocess timeout for git rev-parse

User reports git detection timing out on Windows in MCP server, but CLI works fine.

Path: C:\Users\chris\Documents\DEV_R\quarto-cli
Error: Git repository detection timed out after 5s
Works fine in CLI: `git rev-parse --show-toplevel` succeeds

Hypothesis: subprocess.run() with asyncio.to_thread() may have Windows-specific issues or the MCP runtime environment may not have proper PATH/git access.

Potential fixes:
1. Add subprocess shell=True on Windows
2. Increase timeout further for Windows
3. Add better error logging to capture subprocess stderr
4. Skip git resolution entirely on timeout and just use provided path


Jira export script (jsonl2jira.py)

Create a Python script to push beads issues to Jira.

**Requires**: Jira import script to be complete first (need external_ref matching logic working)

**Features needed**:
- Create new Jira issues from beads issues without external_ref
- Update existing Jira issues matched by external_ref
- Map beads fields back to Jira fields
- Handle Jira workflow transitions (status changes may need transitions)
- Support custom field mapping for design/acceptance_criteria/notes

**Challenges**:
- Jira status changes often require workflow transitions, not direct updates
- Need to discover valid transitions via API
- Custom fields vary by Jira instance

**Usage**:
```bash
bd export | python jsonl2jira.py --create-only  # Only create, don't update
bd export | python jsonl2jira.py                 # Create and update
```

**After creation**: Sets external_ref on beads issue to link back


Latency test manual


Auto-routing and maintainer detection

Implement intelligent routing to automatically send new issues to correct repo based on user's maintainer vs contributor status, with discovered issues inheriting parent's source_repo.


Implement bd migrate command

Add bd migrate command to move issues between repos with filtering. Should support: filtering by status/priority/labels, dry-run mode, preserving dependencies, handling source_repo field updates.


Write Agent Mail integration guide

Comprehensive guide for setting up and using Agent Mail with Beads.

Acceptance Criteria:
- Installation instructions
- Configuration (environment variables)
- Architecture diagram
- Benefits and tradeoffs
- When to use vs not use
- Troubleshooting section
- Migration from git-only mode

File: docs/AGENT_MAIL.md

Sections:
- Quick start
- How it works
- Integration points
- Graceful degradation
- Multi-machine deployment
- FAQ


Performance Validation

Confirm no performance regression from cache removal


Extract daemon logger functions to daemon_logger.go


Add integration tests for multi-repo sync

Test: Clone A deletes issue, Clone B imports Clone A's JSONL. Verify Clone B handles deletion gracefully with resurrection. Test concurrent imports with same orphans (should be idempotent). Test round-trip fidelity (export→delete parent→import→verify structure).


Refactor path canonicalization into helper function

The path canonicalization logic (filepath.Abs + EvalSymlinks) is duplicated in 3 places:
- beads.go:131-137 (BEADS_DIR handling)
- cmd/bd/main.go:446-451 (--no-db cleanup)
- cmd/bd/nodb.go:26-31 (--no-db initialization)

Refactoring suggestion:
Extract to a helper function like:
  func canonicalizePath(path string) string

This would:
- Reduce code duplication
- Make the logic easier to maintain
- Ensure consistent behavior across all path handling

Related to bd-e16b implementation.


Add edge case tests for export metadata updates

## Current Coverage
TestExportUpdatesMetadata tests basic happy path only.

## Missing Test Cases

### 1. Multi-Repo Mode
- Export with multi-repo configuration
- Verify metadata updated for ALL JSONL files
- Critical gap (related to bd-ar2.2)

### 2. computeJSONLHash Failure
- JSONL file deleted/inaccessible after export
- Should log warning, not crash
- Verify behavior on next export

### 3. SetMetadata Failures
- Database write-protected
- Disk full
- Should log warnings, continue

### 4. os.Stat Failure
- JSONL file deleted after export, before stat
- Should handle gracefully (mtime just not updated)

### 5. Concurrent Exports
- Two daemon instances export simultaneously
- Verify metadata doesn't get corrupted
- Race condition test

### 6. Clock Skew
- System time goes backward between exports
- Verify mtime handling still works

### 7. Partial Export Failure
- Multi-repo mode: some exports succeed, some fail
- What metadata should be updated?

### 8. Large JSONL Files
- Performance test with large files (10k+ issues)
- Verify hash computation doesn't timeout

## Files
- cmd/bd/daemon_sync_test.go

## Implementation Priority
1. Multi-repo test (P1 - related to critical issue)
2. Failure handling tests (P2)
3. Performance/edge cases (P3)


Add `bd merge` command wrapping 3-way merge logic

Implement CLI command to invoke beads-merge functionality.

**Interface**:
```bash
bd merge <output> <base> <left> <right>
bd merge --debug <output> <base> <left> <right>
```

**Behavior**:
- Exit code 0 on clean merge
- Exit code 1 if conflicts (write conflict markers)
- Support --debug flag for verbose output
- Match beads-merge's existing behavior

**File**: `cmd/bd/merge.go`


Command Set Standardization & Flag Consistency

Comprehensive improvements to bd command set based on 2025 audit findings.

## Background
See docs/command-audit-2025.md for detailed analysis.

## Goals
1. Standardize flag naming and behavior across all commands
2. Add missing flags for feature parity
3. Fix naming confusion
4. Improve consistency in JSON output

## Success Criteria
- All mutating commands support --dry-run (no --preview variants)
- bd update supports label operations
- bd search has filter parity with bd list
- Priority flags accept both int and P0-P4 format everywhere
- JSON output is consistent across all commands


Fix :memory: database connection pool issue causing "no such table" errors

Critical bug in v0.21.6 where :memory: databases with cache=shared create multiple connections in the pool, causing intermittent "no such table" errors. SQLite's shared cache for in-memory databases only works reliably with a single connection.

Root cause: Missing db.SetMaxOpenConns(1) after sql.Open() for :memory: databases.

Impact: 37 test failures in VC project, affects all consumers using :memory: for testing.


Test issue


Refactor cmd/bd/daemon.go for testability and maintainability


Improve test coverage for cmd/bd/setup (28.4% → 50%)

The setup package has only 28.4% test coverage. Setup commands are critical for first-time user experience.

Current coverage: 28.4%
Target coverage: 50%


Add performance benchmarks for multi-repo hydration

The contributor-workflow-analysis.md asserts sub-second queries (line 702) and describes smart caching via file mtime tracking (Decision #4, lines 584-618), but doesn't provide concrete performance benchmarks.

VC's requirement (from VC feedback section):
- Executor polls GetReadyWork() every 5-10 seconds
- Queries must be sub-second (ideally <100ms)
- Smart caching must avoid re-parsing JSONLs on every query

Suggested performance targets to validate:
- File stat overhead: <1ms per repo
- Hydration (when needed): <500ms for typical JSONL (<25k)
- Query (from cache): <10ms
- Total GetReadyWork(): <100ms (VC's requirement)

Also test at scale:
- N=1 repo (baseline)
- N=3 repos (typical)
- N=10 repos (edge case)

These benchmarks are critical for library consumers like VC that run automated polling loops.


bd delete bulk operations fight with auto-import/daemon causing data resurrection

When bulk deleting issues (e.g., 244 closed issues older than 24h), the process fights with auto-import and daemon infrastructure:

**Expected behavior:**
- Delete 244 issues from 468-issue database
- Export to JSONL (224 lines)
- Commit and push
- Result: 224 issues

**Actual behavior:**
- Delete 244 issues
- Import runs (from stale git JSONL with 468 issues)
- Resurrects deleted issues back into database
- Export writes 356 lines (not 224)
- Math: 468 - 244 = 224, but got 356 (132 issues resurrected)

**Root cause:**
Auto-import keeps re-importing from git during the delete operation, before the new JSONL is committed. The workflow is:
1. Delete from DB
2. Auto-import runs (reads old JSONL from git with deleted issues still present)
3. Issues come back
4. Export writes partially-deleted state

**Solution options:**
1. Add `--no-auto-import` flag to bulk delete operations
2. Atomic delete-export-commit operation that suppresses imports
3. Dedicated `bd prune` command that handles this correctly
4. Lock file to prevent auto-import during bulk mutations

**Impact:**
- Bulk cleanup operations don't work reliably
- Makes it nearly impossible to prune old closed issues
- Confusing UX (delete 244, but only 112 actually removed)

**FIXED**: Auto-import now skips during delete operations to prevent resurrection.

**Root cause confirmed**: Auto-import was running in PersistentPreRun before delete executed, causing it to re-import stale JSONL from git and resurrect deleted issues.

**Solution implemented**:
1. Added delete to skip list in main.go PersistentPreRun (alongside import and sync --dry-run)
2. Delete operations now complete atomically without auto-import interference
3. Added comprehensive test (TestBulkDeleteNoResurrection) to prevent regression

**Test verification**:
- Creates 20 issues, deletes 10
- Verifies no resurrection after delete
- Confirms JSONL has correct count (10 remaining)
- All existing tests still pass


MCP server loses workspace context after Amp restart - causes silent failures

**CRITICAL BUG**: The beads MCP server loses workspace context when Amp restarts, leading to silent failures and potential data corruption.

## Reproduction
1. Start Amp with beads MCP server configured
2. Call `mcp__beads__set_context(workspace_root="/path/to/project")`
3. Use MCP tools successfully (e.g., `mcp__beads__show`, `mcp__beads__list`)
4. Restart Amp (new thread/session)
5. Try to use MCP tools without calling `set_context` again
6. **Result**: "Not connected" or "No workspace set" errors

## Impact
- Amp agents silently fail when trying to read/update beads issues
- May attempt to create duplicate issues because they can't see existing ones
- Potential for data corruption if operating on wrong database
- Breaks multi-session workflows
- Creates confusion: CLI works (`./bd`) but MCP tools don't

## Current Workaround
Manually call `mcp__beads__set_context()` at start of every Amp session.

## Root Cause
MCP server is stateful and doesn't persist workspace context across restarts.

## Proposed Fix
**Option 1 (Best)**: Auto-detect workspace from current working directory
- Match behavior of CLI `./bd` commands
- Check for `.beads/` directory in current dir or parents
- No manual context setting needed

**Option 2**: Persist context in MCP server state file
- Save last workspace_root to `~/.config/beads/mcp_context.json`
- Restore on server startup

**Option 3**: Require explicit context in every MCP call
- Add optional `workspace_root` parameter to all MCP tools
- Fall back to saved context if not provided

Acceptance:
- MCP tools work across Amp restarts without manual set_context()
- Auto-detection matches CLI behavior (walks up from CWD)
- Clear error message when no workspace found
- set_context() still works for explicit override
- BEADS_WORKING_DIR env var support
- Integration test validates restart behavior


Add schema compatibility probe to prevent silent migration failures

Issue #262 revealed a serious bug: migrations may fail silently, causing UNIQUE constraint errors later.

Root cause:
- sqlite.New() runs migrations once on open
- checkVersionMismatch() prints 'database will be upgraded automatically' but only updates metadata
- If migrations fail or daemon runs older version, queries expecting new columns fail with 'no such column'
- Import logic misinterprets this as 'not found' and tries INSERT on existing ID
- Result: UNIQUE constraint failed: issues.id

Fix strategy (minimal):
1. Add schema probe in sqlite.New() after RunMigrations
   - SELECT all expected columns from all tables with LIMIT 0
   - If fails, retry RunMigrations and probe again
   - If still fails, return fatal error with clear message
2. Fix checkVersionMismatch to not claim 'will upgrade' unless probe passes
3. Only update bd_version after successful migration probe
4. Add schema verification before import operations
5. Map 'no such column' errors to clear actionable message

Related: #262


bd-hv01: Brittle string comparison breaks with JSON field reordering

## Problem
deletion_tracking.go:125 uses string comparison to detect unchanged issues:

```go
if leftLine, existsInLeft := leftIndex[id]; existsInLeft && leftLine == baseLine {
    deletions = append(deletions, id)
}
```

This breaks if:
- JSON field order changes (legal in JSON)
- Timestamps updated by import/export
- Whitespace/formatting changes
- Floating point precision varies

## Example Failure
```json
// baseLine
{"id":"bd-1","priority":1,"status":"open"}
// leftLine (same data, different order)
{"id":"bd-1","status":"open","priority":1}
```
These are semantically identical but string comparison fails.

## Fix
Parse and compare JSON semantically:
```go
func jsonEquals(a, b string) bool {
    var objA, objB map[string]interface{}
    json.Unmarshal([]byte(a), &objA)
    json.Unmarshal([]byte(b), &objB)
    return reflect.DeepEqual(objA, objB)
}
```

## Files Affected
- cmd/bd/deletion_tracking.go:125
- cmd/bd/deletion_tracking.go:134-170 (buildIDToLineMap)


Fix bd --version and bd completion to work without database


File change test issue


Update documentation for hash IDs and aliases

Update all documentation to explain hash-based IDs and aliasing system.

## Files to Update

### 1. README.md
Add section explaining hash IDs:
```markdown
## Issue IDs

Beads uses **hash-based IDs** for collision-free distributed issue tracking:

- **Hash ID**: `bd-af78e9a2` (8-char SHA256 prefix, immutable, globally unique)
- **Alias**: `#42` (sequential number, mutable, human-friendly)

### Using IDs
```bash
bd show bd-af78e9a2   # Use hash ID
bd show #42           # Use alias
bd show 42            # Use alias (shorthand)
```

### Why Hash IDs?
- **Collision-free**: Work offline without ID conflicts
- **Distributed**: No coordination needed between clones
- **Git-friendly**: Different IDs = different JSONL lines, fewer merge conflicts

### Aliases
Aliases are workspace-local shortcuts for hash IDs. They're:
- Automatically assigned on issue creation
- Reassigned deterministically on sync (if conflicts)
- Can be manually controlled with `bd alias` commands
```

### 2. AGENTS.md
Update agent workflow:
```markdown
## Hash-Based IDs (v2.0+)

Beads v2.0 uses hash-based IDs to eliminate collision problems:

**When creating issues**:
```bash
bd create "Fix bug" -p 1
# → Creates bd-af78e9a2 with alias #1
```

**When referencing issues**:
- In text: Use hash IDs (stable): "See bd-af78e9a2 for details"
- In CLI: Use aliases (readable): `bd update #42 --status done`

**After sync**:
- Alias conflicts resolved automatically (content-hash ordering)
- No ID collisions possible
- No remapping needed

**Migration from v1.x**:
```bash
bd migrate --hash-ids  # One-time migration
```
```

### 3. QUICKSTART.md (if exists)
Show alias usage in examples:
```bash
# Create issue (gets hash ID + alias)
bd create "Fix authentication bug" -p 1
# → Created bd-af78e9a2 (alias: #1)

# Reference by alias
bd show #1
bd update #1 --status in_progress
bd close #1 --reason "Fixed"
```

### 4. ADVANCED.md
Add section on hash ID internals:
```markdown
## Hash ID Generation

Hash IDs are generated deterministically:

```go
SHA256(title || description || timestamp || workspace_id)[:8]
```

**Collision probability**:
- 8 hex chars = 2^32 space = ~4 billion IDs
- Birthday paradox: 50% collision probability at ~65,000 issues
- For typical projects (<10,000 issues), collision risk is negligible

**Collision detection**:
If a hash collision occurs (extremely rare), beads:
1. Detects on insert (UNIQUE constraint)
2. Appends random suffix: `bd-af78e9a2-a1b2`
3. Retries insert

## Alias Conflict Resolution

When multiple clones assign same alias to different issues:

**Strategy**: Content-hash ordering (deterministic)
- Sort conflicting issue IDs lexicographically
- Lowest hash ID keeps the alias
- Others reassigned to next available aliases

**Example**:
```
Clone A: Assigns #42 to bd-a1b2c3d4
Clone B: Assigns #42 to bd-e5f6a7b8
After sync: bd-a1b2c3d4 keeps #42 (lower hash)
            bd-e5f6a7b8 gets #100 (next available)
```
```

### 5. MIGRATION.md (new file)
```markdown
# Migrating to Hash-Based IDs (v2.0)

## Overview
Beads v2.0 introduces hash-based IDs to eliminate collision problems. This is a **breaking change** requiring migration.

## Migration Steps

### 1. Backup
```bash
cp -r .beads .beads.backup
git commit -am "Pre-migration backup"
```

### 2. Run Migration
```bash
# Dry run first
bd migrate --hash-ids --dry-run

# Apply migration
bd migrate --hash-ids
```

### 3. Commit Changes
```bash
git add .beads/issues.jsonl
git commit -m "Migrate to hash-based IDs (v2.0)"
git push origin main
```

### 4. Coordinate with Collaborators
All clones must migrate before syncing:
1. Notify team: "Migrating to v2.0 on [date]"
2. All collaborators pull latest
3. All run `bd migrate --hash-ids`
4. All push changes
5. Resume normal work

## Rollback
```bash
# Restore backup
mv .beads.backup .beads
bd export  # Regenerate JSONL
git checkout .beads/issues.jsonl
```

## FAQ

**Q: Can I mix v1.x and v2.0 clones?**
A: No. All clones must be on same version.

**Q: Will my old issue IDs work?**
A: No, but aliases preserve the numbers: bd-1c63eb84 → #1

**Q: What happens to links like "see bd-cb64c226.3"?**
A: Migration updates all text references automatically.
```

### 6. CHANGELOG.md
```markdown
## v2.0.0 (YYYY-MM-DD)

### Breaking Changes
- **Hash-based IDs**: Issues now use collision-free hash IDs (bd-af78e9a2)
  instead of sequential IDs (bd-1c63eb84, bd-9063acda)
- **Aliasing system**: Human-friendly aliases (#42) for hash IDs
- **Migration required**: Run `bd migrate --hash-ids` to convert v1.x databases

### Added
- `bd alias` command for manual alias control
- `bd migrate --hash-ids` migration tool
- Alias conflict resolution (deterministic, content-hash ordering)

### Removed
- ID collision detection and resolution (~2,100 LOC)
- `bd import --resolve-collisions` flag (no longer needed)

### Benefits
- ✅ Zero ID collisions in distributed workflows
- ✅ Simpler codebase (-1,350 net LOC)
- ✅ Better git merge behavior
- ✅ True offline-first operation
```

## Testing
- Build docs locally (if using doc generator)
- Check all links work
- Verify examples are correct
- Spellcheck

## Files to Create/Modify
- README.md (hash ID section)
- AGENTS.md (workflow updates)
- ADVANCED.md (internals)
- MIGRATION.md (new)
- CHANGELOG.md (v2.0 entry)
- docs/ (any other docs)


Add test coverage for internal/git package


Add ON DELETE CASCADE to child_counters schema

Update schema.go child_counters table foreign key with ON DELETE CASCADE. When parent deleted, child counter should also be deleted. If parent is resurrected, counter gets recreated from scratch. Add migration for existing databases.


bd-hv01: Silent partial deletion failures cause DB inconsistency

Problem: deletion_tracking.go:76-77 logs deletion errors as warnings but continues. If deletion fails midway (database locked, disk full), some issues delete but others don't. System thinks all deletions succeeded.

Impact: Database diverges from JSONL, silent corruption, issues may resurrect on next sync.

Fix: Collect errors and fail the operation:
var deletionErrors []error
for _, id := range acceptedDeletions {
    if err := d.DeleteIssue(ctx, id); err != nil {
        deletionErrors = append(deletionErrors, fmt.Errorf("issue %s: %w", id, err))
    }
}
if len(deletionErrors) > 0 {
    return false, fmt.Errorf("deletion failures: %v", deletionErrors)
}

Files: cmd/bd/deletion_tracking.go:73-82


Add validation and documentation for metadata key format

## Issues

### 1. No validation that keySuffix doesn't contain separator
```go
if keySuffix != "" {
    hashKey += ":" + keySuffix  // ❌ What if keySuffix contains ":"?
}
```

Add validation:
```go
if strings.Contains(keySuffix, ":") {
    return fmt.Errorf("keySuffix cannot contain ':' separator")
}
```

### 2. Inconsistent keySuffix semantics
Empty string means "global", non-empty means "scoped". Better to always pass explicit key:
```go
const (
    SingleRepoKey = "."
    // Multi-repo uses source_repo identifier
)
```

### 3. Metadata key format not documented
Need to document:
- `last_import_hash` - single-repo mode
- `last_import_hash:<repo_key>` - multi-repo mode
- `last_import_time` - when last import occurred
- `last_import_mtime` - fast-path optimization

Add to internal/storage/sqlite/schema.go or docs/


Fix G304 potential file inclusion in cmd/bd/tips.go:259

Linting issue: G304: Potential file inclusion via variable (gosec) at cmd/bd/tips.go:259:18. Error: if data, err := os.ReadFile(settingsPath); err == nil {


Add tests for 3-way merge scenarios

Comprehensive test coverage for merge logic.

**Test cases**:
- Simple field updates (left vs right)
- Dependency merging (union + dedup)
- Timestamp handling (max wins)
- Deletion detection (deleted in one, modified in other)
- Conflict generation (incompatible changes)
- Issue resurrection prevention (bd-hv01 regression test)

**Files**:
- `internal/merge/merge_test.go`
- `cmd/bd/merge_test.go`


Fix Windows-specific test failures in CI

Several tests are failing on Windows but passing on Linux:

**Failing tests:**
- TestFindDatabasePathEnvVar
- TestHashIDs_MultiCloneConverge
- TestHashIDs_IdenticalContentDedup
- TestDatabaseReinitialization (all 5 subtests):
  - fresh_clone_auto_import
  - database_removal_scenario
  - legacy_filename_support
  - precedence_test
  - init_safety_check
- TestFindBeadsDir_NotFound
- TestMetricsSnapshot/uptime (in internal/rpc)

**CI Run:** https://github.com/steveyegge/beads/actions/runs/19015638968

These are likely path separator or filesystem behavior differences between Windows and Linux.

Fixed all Windows path issues:
1. TestFindDatabasePathEnvVar - expects canonicalized paths ✅
2. TestHashIDs tests - use platform-specific bd.exe command ✅
3. TestMetricsSnapshot/uptime - enforce minimum 1 second uptime ✅
4. TestFindBeadsDir_NotFound - allow finding .beads in parent dirs ✅
5. TestDatabaseReinitialization - fix git path conversion on Windows (git returns /c/Users/... but filepath needs C:\Users\...) ✅

CI run in progress to verify all fixes.


Fix PR #319: Performance Improvements - CI failures and lint errors

PR #319 (Performance Improvements) has excellent performance optimizations but is blocked by CI failures.

## The PR
- URL: https://github.com/steveyegge/beads/pull/319
- Author: @rsnodgrass (Ryan)
- Claimed improvements: bd ready 20.5x faster (752ms → 36.6ms), startup 10.5x faster

## CI Failures

### Lint Errors (8 total)
1. cmd/bd/deletion_tracking.go:57 - unchecked os.Remove
2. cmd/bd/import.go:548 - unchecked os.RemoveAll
3. cmd/bd/message.go:205 - unchecked resp.Body.Close
4. cmd/bd/migrate_issues.go:633 - unchecked fmt.Scanln
5. cmd/bd/migrate_issues.go:701 - unchecked MarkFlagRequired
6. cmd/bd/migrate_issues.go:702 - unchecked MarkFlagRequired
7. cmd/bd/show.go:610 - gosec G104 unhandled error
8. cmd/bd/show.go:614 - gosec G104 unhandled error

### Test Failures
All syncbranch_test.go tests failing with:
"migration external_ref_column failed: failed to create index on external_ref: sqlite3: SQL logic error: no such table: main.issues"

This suggests the PR branch needs rebasing on current main.

## Required Work

### 1. Fix Lint Errors
Add proper error handling for all 8 flagged locations. Most can use _ = or log warnings.

### 2. Rebase on Current Main
The migration test failures indicate the branch is out of sync. Need to:
- git fetch upstream
- git rebase upstream/main
- Resolve any conflicts
- Verify tests pass locally

### 3. Verify CI Passes
- All lint checks green
- All tests pass (Linux, Windows, Nix)

## Optional Improvements
- Consider splitting into smaller PRs (core index, WASM cache, testing infra)
- Add documentation for benchmark usage
- Extract helper functions in doctor/perf.go for better testability

## Value
This PR delivers real performance improvements. The index optimization alone is worth merging quickly once CI is fixed.


Implement `bd prime` command for AI context loading

Create a `bd prime` command that outputs AI-optimized markdown containing essential Beads workflow context. This provides an alternative to the MCP server for token-conscious users and enables context recovery after compaction/clearing.


Fix Homebrew warning about Ruby file location

Homebrew warning: Found Ruby file outside steveyegge/beads tap formula directory.
Warning points to: /opt/homebrew/Library/Taps/steveyegge/homebrew-beads/bd.rb
It should likely be inside a Formula/ directory or similar structure expected by Homebrew taps.


Fix failing integration tests in beads-mcp

The `beads-mcp` test suite has failures in `tests/test_bd_client_integration.py` (assertion error in `test_init_creates_beads_directory`) and errors in `tests/test_worktree_separate_dbs.py` (setup failures finding database). These need to be investigated and fixed to ensure a reliable CI baseline.


bd doctor --fix needs non-interactive mode (-y/--yes flag)

When running `bd doctor --fix` in non-interactive mode (scripts, CI, Claude Code), it prompts 'Continue? (Y/n):' and fails with EOF.

**Expected**: A `-y` or `--yes` flag to auto-confirm fixes.

**Workaround**: Currently have to run `bd init` instead, but that's not discoverable from the doctor output.


Extract SQLite migrations into separate files

The file `internal/storage/sqlite/sqlite.go` is 2,136 lines and contains 11 sequential migrations alongside core storage logic. Extract migrations into a versioned system.

Current issues:
- 11 migration functions mixed with core logic
- Hard to see migration history
- Sequential migrations slow database open
- No clear migration versioning

Migration functions to extract:
- `migrateDirtyIssuesTable()`
- `migrateIssueCountersTable()`
- `migrateExternalRefColumn()`
- `migrateCompositeIndexes()`
- `migrateClosedAtConstraint()`
- `migrateCompactionColumns()`
- `migrateSnapshotsTable()`
- `migrateCompactionConfig()`
- `migrateCompactedAtCommitColumn()`
- `migrateExportHashesTable()`
- Plus 1 more (11 total)

Target structure:
```
internal/storage/sqlite/
├── sqlite.go          # Core storage (~800 lines)
├── schema.go          # Table definitions (~200 lines)
├── migrations.go      # Migration orchestration (~200 lines)
└── migrations/        # Individual migrations
    ├── 001_initial_schema.go
    ├── 002_dirty_issues.go
    ├── 003_issue_counters.go
    [... through 011_export_hashes.go]
```

Benefits:
- Clear migration history
- Each migration self-contained
- Easier to review migration changes in PRs
- Future migrations easier to add


Add WebSocket support

## Feature Request

[Describe the desired feature]

## Motivation

[Why is this feature needed? What problem does it solve?]

## Use Cases

1. **Use Case 1**: [description]
2. **Use Case 2**: [description]

## Proposed Solution

[High-level approach to implementing this feature]

## Alternatives Considered

- **Alternative 1**: [description and why not chosen]
- **Alternative 2**: [description and why not chosen]


RPC fast-fail: stat socket before dial, cap timeouts to 200ms

Eliminate 5s delay when daemon socket is missing by:
1. Add os.Stat(socketPath) check before dialing in TryConnect
2. Return (nil, nil) immediately if socket doesn't exist
3. Set default dial timeout to 200ms in TryConnect
4. Keep TryConnectWithTimeout for explicit health/status checks (1-2s)

This prevents clients from waiting through full timeout when no daemon is running.


Latency test


Rapid 4


Git history fallback missing timeout - could hang on large repos

## Problem

The git commands in `checkGitHistoryForDeletions` have no timeout. On large repos with extensive history, `git log --all -S` or `git log --all -G` can take a very long time (minutes).

## Location
`internal/importer/importer.go:899` and `:930`

## Impact
- Import could hang indefinitely
- User has no feedback that git search is running
- No way to cancel except killing the process

## Fix
Add context with timeout to git commands:

```go
ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second)
defer cancel()
cmd := exec.CommandContext(ctx, "git", ...)
```

Also consider adding a `--since` flag to bound the git history search.


Test parent issue


Fix transaction conflict in TryResurrectParent

Integration test TestImportWithDeletedParent fails with 'database is locked' error when resurrection happens inside CreateIssue.

Root cause: TryResurrectParent calls conn.Get() and insertIssue() which conflicts with existing transaction in CreateIssue.

Error: failed to create tombstone for parent bd-parent: failed to insert issue: sqlite3: database is locked

Solution: Refactor resurrection to accept optional transaction parameter, use existing transaction when available instead of creating new connection.

Impact: Blocks resurrection from working in CreateIssue flow, only works in EnsureIDs (which may not have active transaction).


Support --reason flag in daemon mode for reopen command

The reopen.go command has a TODO at line 61 to add reason as a comment once RPC supports AddComment. Currently --reason flag is ignored in daemon mode with a warning.


Document CLI + hooks as recommended approach over MCP

Update documentation to position CLI + bd prime hooks as the primary recommended approach over MCP server, explaining why minimizing context matters even with large context windows (compute cost, energy, environment, latency).


Implement tombstone TTL and expiration logic

Add IsExpired() method to tombstones, implement TTL config reading from config.yaml, add clock skew grace period. Per design bd-1r5.


[CRITICAL] Sync validation false positive - legitimate deletions trigger 'data loss detected'

Sync preflight validation incorrectly detects 'data loss' when legitimate deletions occur. This blocks all syncs and is the highest priority fix.


Investigate and upgrade to modernc.org/sqlite 1.39.1+

We had to pin modernc.org/sqlite to v1.38.2 due to a FOREIGN KEY constraint regression in v1.39.1 (SQLite 3.50.4).

**Issue:** [deleted:bd-cb64c226.2], GH #144

**Symptom:** CloseIssue fails with "FOREIGN KEY constraint failed (787)" when called via MCP/daemon, but works fine via CLI.

**Root Cause:** Unknown - likely stricter FK enforcement in SQLite 3.50.4 or modernc.org wrapper changes.

**Workaround:** Pinned to v1.38.2 (SQLite 3.49.x)

**TODO:**
1. Monitor modernc.org/sqlite releases for fixes
2. Check SQLite 3.50.5+ changelogs for FK-related fixes
3. Investigate why daemon mode fails but CLI succeeds (connection reuse? transaction isolation?)
4. Consider filing upstream issue with reproducible test case
5. Upgrade when safe


CRDT-based architecture for guaranteed convergence (v2.0)

## Vision
Redesign beads around Conflict-Free Replicated Data Types (CRDTs) to provide mathematical guarantees for N-way collision resolution at arbitrary scale.

## Current Limitations
- Content-hash based collision resolution fails at 5+ clones
- Non-deterministic convergence in multi-round scenarios
- UNIQUE constraint violations during rename operations
- No formal proof of convergence properties

## CRDT Benefits
- Provably convergent (Strong Eventual Consistency)
- Commutative/Associative/Idempotent operations
- No coordination required between clones
- Scales to 100+ concurrent workers
- Well-understood mathematical foundations

## Proposed Architecture

### 1. UUID-Based IDs
Replace sequential IDs with UUIDs:
- Current: bd-1c63eb84, bd-9063acda, bd-4d80b7b1
- CRDT: bd-a1b2c3d4-e5f6-7890-abcd-ef1234567890
- Human aliases maintained separately: #42 maps to UUID

### 2. Last-Write-Wins (LWW) Elements
Each field becomes an LWW register:
- title: (timestamp, clone_id, value)
- status: (timestamp, clone_id, value)
- Deterministic conflict resolution via Lamport timestamp + clone_id tiebreaker

### 3. Operation Log
Track all operations as CRDT ops:
- CREATE(uuid, timestamp, clone_id, fields)
- UPDATE(uuid, field, timestamp, clone_id, value)
- DELETE(uuid, timestamp, clone_id) - tombstone, not hard delete

### 4. Sync as Merge
Syncing becomes merging two CRDT states:
- No merge conflicts possible
- Deterministic merge function
- Guaranteed convergence

## Implementation Phases

### Phase 1: Research & Design (4 weeks)
- Study existing CRDT implementations (Automerge, Yjs, Loro)
- Design schema for CRDT-based issue tracking
- Prototype LWW-based Issue CRDT
- Benchmark performance vs current system

### Phase 2: Parallel Implementation (6 weeks)
- Implement CRDT storage layer alongside SQLite
- Build conversion tools: SQLite ↔ CRDT
- Maintain backward compatibility with v1.x format
- Migration path for existing databases

### Phase 3: Testing & Validation (4 weeks)
- Formal verification of convergence properties
- Stress testing with 100+ clone scenario
- Performance profiling and optimization
- Documentation and examples

### Phase 4: Migration & Rollout (4 weeks)
- Release v2.0-beta with CRDT backend
- Gradual migration from v1.x
- Monitoring and bug fixes
- Final v2.0 release

## Risks & Mitigations

**Risk 1: Performance overhead**
- Mitigation: Benchmark early, optimize hot paths
- CRDTs can be slower than append-only logs
- May need compaction strategy

**Risk 2: Storage bloat**
- Mitigation: Implement operation log compaction
- Tombstone garbage collection for deleted issues
- Periodic snapshots to reduce log size

**Risk 3: Breaking changes**
- Mitigation: Maintain v1.x compatibility layer
- Gradual migration tools
- Dual-mode operation during transition

**Risk 4: Complexity**
- Mitigation: Use battle-tested CRDT libraries
- Comprehensive documentation
- Clear migration guide

## Success Criteria
- 100-clone collision test passes without failures
- Formal proof of convergence properties
- Performance within 2x of current system
- Zero manual conflict resolution required
- Backward compatible with v1.x databases

## Timeline
18-20 weeks total (4-5 months)

## References
- Automerge: https://automerge.org
- Yjs: https://docs.yjs.dev
- Loro: https://loro.dev
- CRDT theory: Shapiro et al, A comprehensive study of CRDTs
- Related issues: bd-0dcea000, bd-4d7fca8a, bd-6221bdcd


Add tests for Integration Layer Implementation

While implementing bd-wfmw, noticed missing tests

Reviewed existing coverage:
- Basic test coverage exists in lib/test_beads_mail_adapter.py
- Integration tests cover failure scenarios in tests/integration/test_mail_failures.py
- Good coverage of: enabled/disabled modes, graceful degradation, 409 conflicts, HTTP errors, config
- Missing: authorization headers detail, request body structure validation, concurrent reservation timing, TTL edge cases


Feature P1


Beads commands operate on stale database without warning

All beads read operations should validate database is in sync with JSONL before proceeding.

**Current Behavior:**
- Commands can query/read from stale database
- Only mutation operations (like 'bd sync') check if JSONL is newer
- User gets incorrect results without realizing database is out of sync

**Expected Behavior:**
- All beads commands should have pre-flight check for database freshness
- If JSONL is newer than database, refuse to operate with error: "Database out of sync. Run 'bd import' first."
- Same safety check that exists for 'bd sync' should apply to ALL operations

**Impact:**
- Users make decisions based on incomplete/outdated data
- Silent failures lead to confusion (e.g., thinking issues don't exist when they do)
- Similar to running git commands on stale repo without being warned to pull

**Example:**
- Searched for bd-g9eu issue file: not found
- Issue exists in .beads/issues.jsonl (in git)
- Database was stale, but no warning was given
- Led to incorrect conclusion that issue was already closed/deleted

## Implementation Complete

**Phase 1: Created staleness check (cmd/bd/staleness.go)**
- ensureDatabaseFresh() function checks JSONL mtime vs last_import_time
- Returns error with helpful message when database is stale
- Auto-skips in daemon mode (daemon has auto-import)

**Phase 2: Added to all read commands**
- list, show, ready, status, stale, info, duplicates, validate
- Check runs before database queries in direct mode
- Daemon mode already protected via checkAndAutoImportIfStale()

**Phase 3: Code Review Findings**
See follow-up issues:
- bd-XXXX: Add warning when staleness check errors
- bd-YYYY: Improve CheckStaleness error handling
- bd-ZZZZ: Refactor redundant daemon checks (low priority)

**Testing:**
- Build successful: go build ./cmd/bd
- Binary works: ./bd --version
- Ready for manual testing

**Next Steps:**
1. Test with stale database scenario
2. Implement review improvements
3. Close issue when tests pass


Batch test 2


Add UNIQUE constraint on external_ref column

The external_ref column should have a UNIQUE constraint to prevent multiple issues from having the same external reference. This ensures data integrity when syncing from external systems (Jira, GitHub, Linear).

Current behavior:
- Multiple issues can have the same external_ref
- GetIssueByExternalRef returns first match (non-deterministic with duplicates)

Proposed solution:
- Add UNIQUE constraint to external_ref column
- Add migration to check for and resolve existing duplicates
- Update tests to verify constraint enforcement

Related: bd-1022