Complete remaining sync branch daemon tests

4 remaining test scenarios in daemon_sync_branch_test.go need completion:

⚠ MINOR FIXES (apply same pattern as TestSyncBranchCommitAndPush_Success):
1. TestSyncBranchCommitAndPush_NoChanges
   - Reorder: call initMainBranch() BEFORE creating JSONL
   - Pattern: init branch → create issue → export JSONL → test

2. TestSyncBranchCommitAndPush_WorktreeHealthCheck
   - Same reordering needed
   - Verify worktree corruption detection and auto-repair

🔧 MORE WORK NEEDED (remote branch setup):
3. TestSyncBranchPull_Success
   - Issue: remote doesn't have sync branch after push
   - Need to verify branch is pushed to remote correctly
   - Then test pull from clone2

4. TestSyncBranchIntegration_EndToEnd
   - Full workflow: Agent A commits → Agent B pulls → Agent B commits → Agent A pulls
   - Same remote branch issue

Pattern to apply (from TestSyncBranchCommitAndPush_Success):
- Call initMainBranch(t, dir) BEFORE creating issues/JSONL
- This ensures sync branch worktree has changes to commit

Acceptance:
- All 7 tests pass
- go test -v -run TestSyncBranch ./cmd/bd/ succeeds


Add Claude Code web installation docs to README

GH #439 reported installation issues in Claude Code web environment. The go install fallback works, but users need guidance. Add a section to README documenting the workaround: go install + PATH export.


bd prime: Detect ephemeral branches and adjust workflow output

When 'bd prime' runs on a branch with no upstream (ephemeral branch), it should output a different SESSION CLOSE PROTOCOL.

**Current output (wrong for ephemeral branches):**
```
[ ] 1. git status
[ ] 2. git add <files>
[ ] 3. bd sync
[ ] 4. git commit -m "..."
[ ] 5. bd sync
[ ] 6. git push
```

**Needed output for ephemeral branches:**
```
[ ] 1. git status
[ ] 2. git add <files>
[ ] 3. bd sync --from-main  (pull updates from main)
[ ] 4. git commit -m "..."
[ ] 5. (no push - branch is ephemeral)
```

**Detection:** `git rev-parse --abbrev-ref --symbolic-full-name @{u}` returns error code 128 if no upstream.

Also update Sync & Collaboration section to mention `bd sync --from-main` for ephemeral branches.

**Use case:** Gastown polecats work on ephemeral local branches that are never pushed. Their code gets merged to main via local merge, and beads changes stay local (communicated via gm mail to Overseer).


Add tests for 3-way merge scenarios

Comprehensive test coverage for merge logic.

**Test cases**:
- Simple field updates (left vs right)
- Dependency merging (union + dedup)
- Timestamp handling (max wins)
- Deletion detection (deleted in one, modified in other)
- Conflict generation (incompatible changes)
- Issue resurrection prevention (bd-hv01 regression test)

**Files**:
- `internal/merge/merge_test.go`
- `cmd/bd/merge_test.go`


Issue 1 to reopen


Update documentation for bd prime and Claude integration

Update AGENTS.md, README.md, and QUICKSTART.md to document the new `bd prime` command, `bd setup claude` command, and tip system.


Document CLI + hooks as recommended approach over MCP

Update documentation to position CLI + bd prime hooks as the primary recommended approach over MCP server, explaining why minimizing context matters even with large context windows (compute cost, energy, environment, latency).


Add unit tests for import ordering

Test topological sort: import [child, parent] should succeed, import [parent.1.2, parent, parent.1] should sort correctly. Verify depth-based batching works. Test max depth limits.


Add bd hooks install command to embed git hooks in binary

Currently git hooks are installed via `examples/git-hooks/install.sh`, which only exists in the beads source repo. Users who install bd via installer/homebrew/npm can't easily install hooks.

**Proposal:**
Add `bd hooks install` command that:
- Embeds hook scripts in the bd binary (using go:embed)
- Installs them to .git/hooks/ in current repo
- Backs up existing hooks
- Makes them executable

**Commands:**
- `bd hooks install` - Install all hooks
- `bd hooks uninstall` - Remove hooks
- `bd hooks list` - Show installed hooks status

**Benefits:**
- Works for all bd users, not just source repo users
- More discoverable (shows in bd --help)
- Consistent with bd workflow
- Can version hooks with bd releases


Review PR #514: fix plugin install docs

Review and merge PR #514 from aspiers. This PR fixes incorrect docs for installing Claude Code plugin from source in docs/PLUGIN.md. Clarifies shell vs Claude Code commands and fixes the . vs ./beads argument issue. URL: https://github.com/anthropics/beads/pull/514


Remove misleading placeholder 'bd merge' command from duplicates output

**Problem:**
The `bd duplicates` command suggests running a command that doesn't exist:
```
bd merge <source-ids> --into <target-id>
```

This is confusing because:
1. `bd merge` is actually a git 3-way JSONL merge driver (takes 4 file paths)
2. The suggested syntax for merging duplicate issues is not implemented
3. Line 75 in duplicates.go even has: `// TODO: performMerge implementation pending`

**Current behavior:**
- Users see suggested command that doesn't work
- No indication that feature is unimplemented
- Related to issue #349 item #2

**Proposed fix:**
Replace line 77 in cmd/bd/duplicates.go with either:

Option A (conservative):
```go
cmd := fmt.Sprintf("# TODO: Merge %s into %s (merge command not yet implemented)",
    strings.Join(sources, " "), target.ID)
```

Option B (actionable):
```go
cmd := fmt.Sprintf("# Duplicate found: %s\n# Manual merge: Close duplicates with 'bd close %s' and link to %s as 'related'",
    strings.Join(sources, " "), strings.Join(sources, " "), target.ID)
```

**Files to modify:**
- cmd/bd/duplicates.go (line ~77)


Fix SyncJSONLToWorktree to merge instead of overwrite

SyncJSONLToWorktree blindly copies local JSONL to worktree, overwriting remote issues.

## Root Cause (GitHub #464)
When Computer B syncs with fewer issues than remote:
1. preemptiveFetchAndFastForward updates worktree (10 issues)
2. SyncJSONLToWorktree overwrites with local (1 issue)
3. Commit records deletion of 9 issues
4. 3-way merge sees "deletion in left" → deletion wins

## Fix
Before copying, check if worktree has more issues. If so:
- Option A: Merge local into worktree (preferred)
- Option B: Fail with helpful error message
- Option C: Warn and require --force flag

## Location
internal/syncbranch/worktree.go:107 - SyncJSONLToWorktree call

## Test Case
1. Clone repo with sync-branch containing issues
2. bd init (starts empty since JSONL on sync-branch)
3. bd create "test"
4. bd sync
5. Verify all issues preserved, not just "test"


bd init resets metadata.json jsonl_export to beads.jsonl, ignoring existing issues.jsonl

When running 'bd init --prefix bd' in a repo that already has .beads/issues.jsonl, the init command overwrites metadata.json and sets jsonl_export back to 'beads.jsonl' instead of detecting and respecting the existing issues.jsonl file.

Steps to reproduce:
1. Have a repo with .beads/issues.jsonl (canonical) and metadata.json pointing to issues.jsonl
2. Delete beads.db and run 'bd init --prefix bd'
3. Check metadata.json - it now says jsonl_export: beads.jsonl

Expected: Init should detect existing issues.jsonl and use it.

Workaround: Manually edit metadata.json after init.


Benchmark Suite for Critical Operations

Extend existing benchmark suite with comprehensive benchmarks for critical operations at 10K-20K scale.

Existing benchmarks (keep these):
- cycle_bench_test.go - Cycle detection up to 5K issues (linear, tree, dense graphs)
- compact_bench_test.go - Compaction candidate queries (100 issues)
- internal/rpc/bench_test.go - Daemon vs direct mode comparison

New benchmarks to add in sqlite_bench_test.go (~10-12 total):
1. GetReadyWork - Simple, deep hierarchies, cross-linked (CRITICAL - not currently benchmarked)
2. SearchIssues - No filters, complex filters (CRITICAL - not currently benchmarked)
3. CreateIssue - Single issue creation
4. UpdateIssue - Status/priority/assignee changes
5. AddDependency - Extend to 10K/20K scale (currently only up to 5K)
6. JSONL Export - Full export performance
7. JSONL Import - Import performance

Scale levels:
- Large: 10K issues (5K open, 5K closed)
- XLarge: 20K issues (10K open, 10K closed)

Implementation:
- NEW FILE: internal/storage/sqlite/sqlite_bench_test.go
- Keep existing cycle_bench_test.go and compact_bench_test.go unchanged
- Build tag: //go:build bench
- Standard testing.B benchmarks
- b.ReportAllocs() for memory tracking
- Test both SQLite and JSONL-imported databases

Always generates CPU and memory profiles for analysis.


Fix autoimport tests for content-hash collision scoring

## Overview
Three autoimport tests are failing after [deleted:bd-cbed9619.4] because they expect behavior based on the old reference-counting collision resolution, but the system now uses deterministic content-hash scoring.

## Failing Tests
1. `TestAutoImportMultipleCollisionsRemapped` - expects local versions preserved
2. `TestAutoImportAllCollisionsRemapped` - expects local versions preserved
3. `TestAutoImportCollisionRemapMultipleFields` - expects specific collision resolution behavior

## Root Cause
These tests were written when ScoreCollisions used reference counting to determine which version to keep. Now it uses content-hash comparison (introduced in commit 2e87329), which produces different but deterministic results.

## Example
Old behavior: Issue with more references would be kept
New behavior: Issue with lexicographically lower content hash is kept

## Solution
Update each test to:
1. Verify the new content-hash based behavior is correct
2. Check that the remapped issue (not necessarily local/remote) has the expected content
3. Ensure dependencies are preserved on the correct remapped issue

## Acceptance Criteria
- All three autoimport tests pass
- Tests verify content-hash determinism (same collision always resolves the same way)
- Tests check dependency preservation on remapped issues
- Test documentation explains content-hash scoring expectations

## Files to Modify
- `cmd/bd/autoimport_collision_test.go`

## Testing
Run: `go test ./cmd/bd -run "TestAutoImport.*Collision" -v`


Update AGENTS.md with event-driven mode

Document BEADS_DAEMON_MODE env var. Explain opt-in during Phase 1. Add troubleshooting for watcher failures.


Document bd-wasm installation and usage

Create documentation for bd-wasm:
- Update README with npm installation instructions
- Add troubleshooting section for WASM-specific issues
- Document known limitations vs native bd
- Add examples for Claude Code Web sandbox usage
- Update INSTALLING.md with bd-wasm option


bd info shows 'auto_start_disabled' even when daemon is crashed/missing


convertDeletionToTombstone uses hardcoded default values

The convertDeletionToTombstone helper (importer.go:1114-1130) uses hardcoded defaults:
- Priority: 2
- IssueType: types.TypeTask
- Title: "(deleted)"

These defaults work but could be improved:
1. Consider using Priority: 0 (unset) to distinguish from user-set priority
2. OriginalType is empty string - consider setting IssueType to empty to be consistent
3. Title could include the original ID for debugging: "(deleted: bd-xyz)"

Low priority cleanup for consistency.


Refactor daemon.go into internal/daemonrunner

Extract daemon runtime from daemon.go (1,565 lines) into internal/daemonrunner with focused modules: config.go, daemon.go, process.go, rpc_server.go, sync.go, git.go. Keep cobra command thin.


Delete collision resolution code

Remove ~2,100 LOC of ID collision detection and resolution code (no longer needed with hash IDs).

## Files to Delete Entirely
```
internal/storage/sqlite/collision.go              (~800 LOC)
internal/storage/sqlite/collision_test.go         (~300 LOC)
cmd/bd/autoimport_collision_test.go               (~400 LOC)
```

## Code to Remove from Existing Files

### internal/importer/importer.go
Remove:
- `DetectCollisions()` calls
- `ScoreCollisions()` logic
- `RemapCollisions()` calls
- `handleRename()` function
- All collision-related error handling

Keep:
- Basic import logic
- Exact match detection (idempotent import)

### beads_twoclone_test.go
Remove:
- `TestTwoCloneCollision` (bd-71107098)
- `TestThreeCloneCollision` (bd-cbed9619)
- `TestFiveCloneCollision` (bd-a40f374f)
- All N-way collision tests

### cmd/bd/import.go
Remove:
- `--resolve-collisions` flag
- `--dry-run` collision preview
- Collision reporting

## Issues Closed by This Change
- bd-71107098: Add test for symmetric collision
--89: Content-hash collision resolution
- bd-cbed9619: N-way collision resolution epic
- bd-cbed9619.5: Add ScoreCollisions (already done but now unnecessary)
- bd-cbed9619.4: Make DetectCollisions read-only
- bd-cbed9619.3: ResolveNWayCollisions function
- bd-cbed9619.2: Multi-round import convergence
- bd-cbed9619.1: Multi-round convergence for N-way collisions
- bd-e6d71828: Transaction + retry logic for collisions
- bd-70419816: Test case for symmetric collision

## Verification Steps
1. `grep -r "collision" --include="*.go"` → should only find alias conflicts
2. `go test ./...` → all tests pass
3. `go build ./cmd/bd` → clean build
4. Check LOC reduction: `git diff --stat`

## Expected Metrics
- **Files deleted**: 3
- **LOC removed**: ~2,100
- **Test coverage**: Should increase (less untested code)
- **Binary size**: Slightly smaller

## Caution
Do NOT delete:
- Alias conflict resolution (new code in bd-f8b764c9.6)
- Duplicate detection (bd-581b80b3, bd-149) - different from ID collisions
- Merge conflict resolution (bd-7e7ddffa.1, bd-5f483051) - git conflicts, not ID collisions

## Files to Modify
- internal/importer/importer.go (remove collision handling)
- cmd/bd/import.go (remove --resolve-collisions flag)
- beads_twoclone_test.go (remove collision tests)
- Delete: internal/storage/sqlite/collision.go
- Delete: internal/storage/sqlite/collision_test.go
- Delete: cmd/bd/autoimport_collision_test.go

## Testing
- Ensure all remaining tests pass
- Manual test: create issue on two clones, sync → no collisions
- Verify error if somehow hash collision occurs (extremely unlikely)


Add guidance for self-hosting projects

The contributor-workflow-analysis.md is optimized for OSS contributors making PRs to upstream projects. However, it doesn't address projects like VC that use beads for their own development (self-hosting).

Self-hosting projects differ from OSS contributors:
- No upstream/downstream distinction (they ARE the project)
- May run automated executors (not just humans)
- In bootstrap/early phase (stability matters)
- Single team/owner (not multiple contributors with permissions)

Guidance needed on:
- When self-hosting projects should stay single-repo (default, recommended)
- When they should adopt multi-repo (team planning, multi-phase dev)
- How automated executors should handle multi-repo (if at all)
- Special considerations for projects in bootstrap phase

Examples of self-hosting projects: VC (building itself with beads), internal tools, pet projects


DetectCycles SQL query has bug preventing cycle detection

The DetectCycles function's SQL query has a bug in the LIKE filter that prevents it from detecting cycles.

Current code (line 571):
```sql
AND p.path NOT LIKE '%' || d.depends_on_id || '→%'
```

This prevents ANY revisit to nodes, including returning to the start node to complete a cycle.

Fix:
```sql
AND (d.depends_on_id = p.start_id OR p.path NOT LIKE '%' || d.depends_on_id || '→%')
```

This allows revisiting the start node (to detect the cycle) while still preventing intermediate node revisits.

Impact: Currently DetectCycles cannot detect any cycles, but this hasn't been noticed because AddDependency prevents cycles from being created. The function would only matter if cycles were manually inserted into the database.


Batch test 1


Add schema compatibility probe to prevent silent migration failures

Issue #262 revealed a serious bug: migrations may fail silently, causing UNIQUE constraint errors later.

Root cause:
- sqlite.New() runs migrations once on open
- checkVersionMismatch() prints 'database will be upgraded automatically' but only updates metadata
- If migrations fail or daemon runs older version, queries expecting new columns fail with 'no such column'
- Import logic misinterprets this as 'not found' and tries INSERT on existing ID
- Result: UNIQUE constraint failed: issues.id

Fix strategy (minimal):
1. Add schema probe in sqlite.New() after RunMigrations
   - SELECT all expected columns from all tables with LIMIT 0
   - If fails, retry RunMigrations and probe again
   - If still fails, return fatal error with clear message
2. Fix checkVersionMismatch to not claim 'will upgrade' unless probe passes
3. Only update bd_version after successful migration probe
4. Add schema verification before import operations
5. Map 'no such column' errors to clear actionable message

Related: #262


Fix Nix flake build test failures

Nix build is failing during test phase with same test errors as Windows.

**Error:**
```
error: Cannot build '/nix/store/rgyi1j44dm6ylrzlg2h3z97axmfq9hzr-beads-0.9.9.drv'.
Reason: builder failed with exit code 1.
FAIL github.com/steveyegge/beads/cmd/bd 16.141s
```

This may be related to test environment setup or the same issues affecting Windows tests.


Stress test: event storm handling

Simulate 100+ rapid JSONL writes. Verify debouncer batches to single import. Verify no data loss. Test daemon stability.


Windows binaries lack SQLite support (GH #253)

Windows users installing via install.ps1 get "sql: unknown driver sqlite" error. Root cause: GoReleaser was building with CGO_ENABLED=0, which excludes SQLite driver.

Fixed by:
1. Enabling CGO in .goreleaser.yml
2. Installing MinGW cross-compiler in release workflow
3. Splitting builds per platform to set correct CC for Windows

Needs new release to fix for users.


Create cmd/bd/daemon_watcher.go (~150 LOC)

Implement FileWatcher using fsnotify to watch JSONL file and git refs. Handle platform differences (inotify/FSEvents/ReadDirectoryChangesW). Include edge case handling for file rename, event storm, watcher failure.


Add security tests for WriteFile permissions in doctor command

Test coverage gap identified by automated analysis (vc-217).

**Original Issue:** [deleted:[deleted:bd-da96-baseline-lint]]

In cmd/bd/doctor/gitignore.go:98, os.WriteFile uses 0644 permissions, flagged by gosec G306 as potentially too permissive.

Add tests to verify:
- File is created with appropriate permissions (0600 or less)
- Existing file permissions are not loosened
- File ownership is correct
- Sensitive data handling if .gitignore contains secrets

This ensures .gitignore files are created with secure permissions to prevent unauthorized access.

_This issue was automatically created by AI test coverage analysis._


Configure database connection pool limits for daemon mode

Database connection pool not configured for file-based databases when running in daemon mode.

Location: internal/storage/sqlite/sqlite.go:108-116

Problem:
- Daemon is a long-running server handling concurrent RPC requests
- Multiple CLI commands hit same daemon simultaneously
- Go default: unlimited connections (MaxOpenConns=0)
- SQLite IMMEDIATE transactions serialize on write lock
- Can have 100+ goroutines blocked waiting, each holding connection
- Results in connection exhaustion and 'database is locked' errors

Current code only limits in-memory DBs:
if isInMemory {
    db.SetMaxOpenConns(1)
    db.SetMaxIdleConns(1)
}
// File DBs: UNLIMITED connections!

Fix:
if !isInMemory {
    maxConns := runtime.NumCPU() + 1  // 1 writer + N readers
    db.SetMaxOpenConns(maxConns)
    db.SetMaxIdleConns(2)
    db.SetConnMaxLifetime(0)
}

Impact: 'database is locked' errors under concurrent load in daemon mode

Note: NOT an issue for direct CLI usage (each process isolated). Only affects daemon mode where multiple CLI commands share one database pool.

Effort: 1 hour


Make DetectCollisions read-only (separate detection from modification)

## Overview
Phase 2: Separate collision detection from state modification to enable safe, composable collision resolution.

## Current Problem
DetectCollisions (collision.go:38-111) modifies database state during detection:
- Line 83-86: Deletes issues when content matches but ID differs
- This violates separation of concerns
- Causes race conditions when processing multiple issues
- Makes contentToDBIssue map stale after first deletion
- Partial failures leave DB in inconsistent state

## Solution
Make DetectCollisions purely read-only. Move all modifications to a separate ApplyCollisionResolution function.

## Implementation Tasks

### 1. Add RenameDetail to CollisionResult
File: internal/storage/sqlite/collision.go
```go
type CollisionResult struct {
    ExactMatches []string
    Collisions   []*CollisionDetail
    NewIssues    []string
    Renames      []*RenameDetail  // NEW
}

type RenameDetail struct {
    OldID string        // ID in database
    NewID string        // ID in incoming
    Issue *types.Issue  // The issue with new ID
}
```

### 2. Remove deletion from DetectCollisions
Replace lines 83-86:
```go
// OLD (DELETE THIS):
if err := s.DeleteIssue(ctx, dbMatch.ID); err != nil {
    return nil, fmt.Errorf("failed to delete renamed issue...")
}

// NEW (ADD THIS):
result.Renames = append(result.Renames, &RenameDetail{
    OldID: dbMatch.ID,
    NewID: incoming.ID,
    Issue: incoming,
})
continue  // Don't mark as NewIssue yet
```

### 3. Create ApplyCollisionResolution function
New function to apply all modifications atomically:
```go
func ApplyCollisionResolution(ctx context.Context, s *SQLiteStorage,
    result *CollisionResult, mapping map[string]string) error {

    // Phase 1: Handle renames (delete old IDs)
    for _, rename := range result.Renames {
        if err := s.DeleteIssue(ctx, rename.OldID); err != nil {
            return fmt.Errorf("failed to delete renamed issue %s: %w",
                rename.OldID, err)
        }
    }

    // Phase 2: Create new IDs (from mapping)
    // Phase 3: Update references
    return nil
}
```

### 4. Update callers to use two-phase approach
File: internal/importer/importer.go (handleCollisions)
```go
// Phase 1: Detect (read-only)
collisionResult, err := sqlite.DetectCollisions(ctx, sqliteStore, issues)

// Phase 2: Resolve (compute mapping)
mapping, err := sqlite.ResolveNWayCollisions(ctx, sqliteStore, collisionResult)

// Phase 3: Apply (modify DB)
err = sqlite.ApplyCollisionResolution(ctx, sqliteStore, collisionResult, mapping)
```

### 5. Update tests
- Verify DetectCollisions doesn't modify DB
- Test ApplyCollisionResolution separately
- Add test for rename detection without modification

## Acceptance Criteria
- DetectCollisions performs zero writes to database
- DetectCollisions returns RenameDetail entries for content matches
- ApplyCollisionResolution handles all modifications
- All existing tests still pass
- New test verifies read-only detection
- contentToDBIssue map stays consistent throughout detection

## Files to Modify
- internal/storage/sqlite/collision.go (DetectCollisions, new function)
- internal/importer/importer.go (handleCollisions caller)
- internal/storage/sqlite/collision_test.go (add tests)

## Testing
- Unit test: DetectCollisions with content match doesn't delete DB issue
- Unit test: RenameDetail correctly populated
- Unit test: ApplyCollisionResolution applies renames
- Integration test: Full flow still works end-to-end

## Risk Mitigation
This is a significant refactor of core collision logic. Recommend:
1. Add comprehensive tests before modifying
2. Use feature flag to enable/disable new behavior
3. Test thoroughly with TestTwoCloneCollision first


bd sync --import-only doesn't update DB mtime causing bd doctor false warning


sync tries to create worktree in .git file

example: bd sync --no-daemon
→ Exporting pending changes to JSONL...
→ Committing changes to sync branch 'worktree-db-fail'...
Error committing to sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/worktree-db-fail/.git: not a directory


TestHooksCheckGitHooks failing - version mismatch (0.23.0 vs 0.23.1)

The test is checking embedded hook versions and expecting 0.23.1, but got 0.23.0. This appears to be a version consistency issue that needs investigation.

Test output:
```
Hook pre-commit version mismatch: got 0.23.0, want 0.23.1
Hook post-merge version mismatch: got 0.23.0, want 0.23.1
Hook pre-push version mismatch: got 0.23.0, want 0.23.1
```

This is blocking the landing of GH #274 fix.


Batch test 5


Auto-resolve all field conflicts in merge.go

Eliminate manual conflict resolution by adding deterministic auto-resolve rules for all fields:

- Priority: higher priority wins (lower number = more urgent)
- IssueType: local wins
- Notes: concatenate both sides with separator
- Title: side with latest updated_at on the issue wins
- Description: side with latest updated_at on the issue wins

Currently true conflicts (both sides changed same field to different values) fail sync. With this change, NO conflicts ever require manual resolution.

Location: internal/merge/merge.go
Parent issue: bd-3s8


Baseline quality gate failure: test

The test quality gate is failing on the baseline (main branch).

This blocks the executor from claiming work until fixed.

Error: go test failed: exit status 1

Output:
```
?   	github.com/steveyegge/beads	[no test files]
# github.com/steveyegge/beads/internal/beads_test [github.com/steveyegge/beads/internal/beads.test]
internal/beads/routing_integration_test.go:142:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
# github.com/steveyegge/beads/internal/compact [github.com/steveyegge/beads/internal/compact.test]
internal/compact/compactor_test.go:17:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
# github.com/steveyegge/beads/cmd/bd [github.com/steveyegge/beads/cmd/bd.test]
cmd/bd/integrity_content_test.go:31:32: undefined: ctx
cmd/bd/integrity_content_test.go:183:32: undefined: ctx
FAIL	github.com/steveyegge/beads/cmd/bd [build failed]
# github.com/steveyegge/beads/internal/daemon [github.com/steveyegge/beads/internal/daemon.test]
internal/daemon/discovery_test.go:21:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/daemon/discovery_test.go:59:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/daemon/discovery_test.go:232:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
# github.com/steveyegge/beads/internal/importer [github.com/steveyegge/beads/internal/importer.test]
internal/importer/external_ref_test.go:22:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/external_ref_test.go:106:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/external_ref_test.go:197:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/external_ref_test.go:295:27: not enough arguments in call to sqlite.New
	have (string)
	want (context.Context, string)
internal/importer/importer_test.go:566:27: not enough arguments in call to sqlite.New
	have (st
... (truncated, see full output in logs)
```

Released by executor after budget limit hit. Tests were already fixed manually. Issue can be closed when tests are verified to pass.


Add programmatic tip injection API

Allow tips to be programmatically injected at runtime based on detected conditions. This enables dynamic tips (not just pre-defined ones) to be shown with custom priority and frequency.


bd import silently succeeds when database matches working tree but not git HEAD

**Critical**: bd import reports '0 created, 0 updated' when database matches working tree JSONL, even when working tree is ahead of git HEAD. This gives false confidence that everything is synced with the source of truth.

## Reproduction

1. Start with database synced to working tree .beads/issues.jsonl (376 issues)
2. Git HEAD has older version of .beads/issues.jsonl (354 issues)
3. Run: bd import .beads/issues.jsonl
4. Output: 'Import complete: 0 created, 0 updated'

## Problem

User expects 'bd import' after 'git pull' to sync database with committed state, but:
- Command silently succeeds because DB already matches working tree
- No warning that working tree has uncommitted changes
- User falsely believes everything is synced with git
- Violates 'JSONL in git is source of truth' principle

## Expected Behavior

When .beads/issues.jsonl differs from git HEAD, bd import should:
1. Detect uncommitted changes: git diff --quiet HEAD .beads/issues.jsonl
2. Warn user: 'Warning: .beads/issues.jsonl has uncommitted changes (376 lines vs 354 in HEAD)'
3. Clarify status: 'Import complete: 0 created, 0 updated (already synced with working tree)'
4. Recommend: 'Run git diff .beads/issues.jsonl to review uncommitted work'

## Impact

- Users can't trust 'bd import' status messages
- Silent data loss risk if user assumes synced and runs git checkout
- Breaks mental model of 'JSONL in git = source of truth'
- Critical for VC's landing-the-plane workflow


Add .beads-backup-* pattern to gitignore template

Update the gitignore template in doctor package to include backup directories.

## Change
Add `.beads-backup-*/` to the GitignoreTemplate in `cmd/bd/doctor/gitignore.go`

## Why
Backup directories created by `bd reset --backup` should not be committed to git.
They are local-only recovery tools.

## File
`cmd/bd/doctor/gitignore.go` - look for GitignoreTemplate constant


Database import silently fails when daemon version != CLI version


Prevent multiple daemons from running on the same repo

Multiple bd daemons running on the same repo clone causes race conditions and data corruption risks.

**Problem:**
- Nothing prevents spawning multiple daemons for the same repository
- Multiple daemons watching the same files can conflict during sync operations
- Observed: 4 daemons running simultaneously caused sync race condition

**Solution:**
Implement daemon singleton enforcement per repo:
1. Use a lock file (e.g., .beads/.daemon.lock) with PID
2. On daemon start, check if lock exists and process is alive
3. If stale lock (dead PID), clean up and acquire lock
4. If active daemon exists, either:
   - Exit with message 'daemon already running (PID xxx)'
   - Or offer --replace flag to kill existing and take over
5. Release lock on graceful shutdown

**Edge cases to handle:**
- Daemon crashes without releasing lock (stale PID detection)
- Multiple repos in same directory tree (each repo gets own lock)
- Race between two daemons starting simultaneously (atomic lock acquisition)


Add tests for DetectCycles to improve coverage from 29.6%

DetectCycles currently has 29.6% coverage. Need comprehensive tests for:
- Simple cycles (A->B->A)
- Complex multi-node cycles
- Acyclic graphs (should not detect cycles)
- Self-loops
- Multiple independent cycles
- Edge cases (empty graph, single node)


Add command injection prevention tests for git rm in merge command

Test coverage gap identified by automated analysis (vc-217).

**Original Issue:** [deleted:bd-da96-baseline-lint]

In cmd/bd/merge.go:121, exec.Command is called with variable fullPath, flagged by gosec G204 for potential command injection.

Add tests covering:
- File paths with shell metacharacters (;, |, &, $, etc.)
- Paths with spaces and special characters
- Paths attempting command injection (e.g., 'file; rm -rf /')
- Validation that fullPath is properly sanitized
- Only valid git-tracked files can be removed

This is a critical security path preventing arbitrary command execution.

_This issue was automatically created by AI test coverage analysis._


Duplicate tombstone constants in merge and types packages

## Problem

The tombstone constants are duplicated between two packages:

**internal/types/types.go:**
```go
const DefaultTombstoneTTL = 30 * 24 * time.Hour
const ClockSkewGrace = 1 * time.Hour
const StatusTombstone Status = "tombstone"
```

**internal/merge/merge.go:**
```go
const StatusTombstone = "tombstone"
const DefaultTombstoneTTL = 30 * 24 * time.Hour
const ClockSkewGrace = 1 * time.Hour
```

This violates DRY and creates risk of divergence if one is updated but not the other.

## Root Cause

The merge package has its own `Issue` struct (for JSONL parsing) and cannot import types.Issue directly due to the different struct design. However, the constants could be shared.

## Recommendation

Export the constants from types package and import them in merge:

```go
// merge/merge.go
import "github.com/steveyegge/beads/internal/types"

// Use types.StatusTombstone, types.DefaultTombstoneTTL, types.ClockSkewGrace
```

Or create a shared constants package if import cycles are a concern.

## Files
- internal/merge/merge.go:241-248
- internal/types/types.go:77-84, 170


show commit hash in 'bd version' when built from source'


CRITICAL: git-history-backfill purges entire database when JSONL reset

When a clone gets reset (git reset --hard origin/main), the git-history-backfill logic incorrectly adds ALL issues to the deletions manifest, then sync purges the entire database.\n\nFix adds safety guard: never delete more than 50% of issues via git-history-backfill. If threshold exceeded, abort with warning message.


bd-hv01: Multi-repo mode not tested with deletion tracking

Problem: Test suite has no coverage for multi-repo mode. ExportToMultiRepo creates multiple JSONL files but snapshot files are hardcoded to single JSONL location.

Impact: Deletion tracking likely silently broken for multi-repo users, could cause data loss.

Fix: Add test and update snapshot logic to handle multiple JSONL files.

Files: cmd/bd/deletion_tracking_test.go, cmd/bd/deletion_tracking.go, cmd/bd/daemon_sync.go:24-34


PushSyncBranch may fail if worktree was cleaned up


Fix gosec lint warnings in doctor.go, main.go, and fix subdirectory

CI lint job failing with 4 gosec warnings:
- cmd/bd/doctor.go:664 (G304: file inclusion via variable)
- cmd/bd/doctor/fix/database_config.go:166 (G304: file inclusion via variable)
- cmd/bd/doctor/fix/untracked.go:61 (G204: subprocess launched with variable)
- cmd/bd/main.go:645 (G304: file inclusion via variable)

Either suppress with `// #nosec` if false positives, or refactor to validate paths properly.


Publish bd-wasm to npm

Package and publish WASM build to npm. Child of epic bd-44d0.

## Tasks
- [ ] Optimize WASM bundle (compression)
- [ ] Create README for npm package
- [ ] Set up npm publishing workflow
- [ ] Publish v0.1.0-alpha
- [ ] Test installation in clean environment
- [ ] Update beads AGENTS.md with installation instructions

## Package Name
bd-wasm (or @beads/wasm-cli)


Add edge case tests for GetNextChildID parent resurrection

## Current Coverage
TestGetNextChildID_ResurrectParent tests happy path only:
- Parent exists in JSONL
- Resurrection succeeds

## Missing Test Cases

### 1. Parent Not in JSONL
- Parent doesn't exist in DB
- Parent doesn't exist in JSONL either
- Should return: "could not be resurrected from JSONL history"

### 2. JSONL File Missing
- Parent doesn't exist in DB
- No issues.jsonl file exists
- Should handle gracefully

### 3. Malformed JSONL
- Parent doesn't exist in DB
- JSONL file exists but has invalid JSON
- Should skip bad lines, continue searching

### 4. Concurrent Resurrections
- Multiple goroutines call GetNextChildID with same parent
- Only one should resurrect, others should succeed
- Test for race conditions

### 5. Deeply Nested Missing Parents
- Creating bd-abc.1.2.1 where:
  - bd-abc exists
  - bd-abc.1 missing (should fail with current fix)
- Related to bd-ar2.4

### 6. Content Hash Mismatch
- Parent in JSONL has different content_hash than expected
- Should still resurrect (content_hash is for integrity, not identity)

## Files
- internal/storage/sqlite/child_id_test.go

## Implementation
```go
func TestGetNextChildID_ResurrectParent_NotInJSONL(t *testing.T) { ... }
func TestGetNextChildID_ResurrectParent_NoJSONL(t *testing.T) { ... }
func TestGetNextChildID_ResurrectParent_MalformedJSONL(t *testing.T) { ... }
func TestGetNextChildID_ResurrectParent_Concurrent(t *testing.T) { ... }
```


Test numeric 1


~/src/beads daemon has 'sql: database is closed' errors - zombie daemon


[CRITICAL] Sync validation false positive - legitimate deletions trigger 'data loss detected'

Sync preflight validation incorrectly detects 'data loss' when legitimate deletions occur. This blocks all syncs and is the highest priority fix.


User Diagnostics (bd doctor --perf)

Extend cmd/bd/doctor.go to add --perf flag for user performance diagnostics.

Functionality:
- Add --perf flag to existing bd doctor command
- Collect system info (OS, arch, Go version, SQLite version)
- Collect database stats (size, issue counts, dependency counts)
- Time key operations on user's actual database:
  * bd ready
  * bd list --status=open
  * bd show <random-issue>
  * bd create (with rollback)
  * Search with filters
- Generate CPU profile automatically (timestamped filename)
- Output simple report with platform info, timings, profile location

Output example:
  Beads Performance Diagnostics
  Platform: darwin/arm64
  Database: 8,234 issues (4,123 open)

  Operation Performance:
    bd ready                  42ms
    bd list --status=open     15ms

  Profile saved: beads-perf-2025-11-13.prof
  View: go tool pprof -http=:8080 beads-perf-2025-11-13.prof

Implementation:
- Extend cmd/bd/doctor.go (~100 lines)
- Use runtime/pprof for CPU profiling
- Use time.Now()/time.Since() for timing
- Rollback test operations (don't modify user's database)


Deletion propagation via deletions manifest

## Problem

When `bd cleanup -f` or `bd delete` removes issues in one clone, those deletions don't propagate to other clones. The import logic only creates/updates, never deletes. This causes "resurrection" where deleted issues reappear.

## Root Cause

Import sees DB issues not in JSONL and assumes they're "local unpushed work" rather than "intentionally deleted upstream."

## Solution: Deletions Manifest

Add `.beads/deletions.jsonl` - an append-only log of deleted issue IDs with metadata.

### Format
```jsonl
{"id":"bd-xxx","ts":"2025-11-25T10:00:00Z","by":"stevey"}
{"id":"bd-yyy","ts":"2025-11-25T10:05:00Z","by":"claude","reason":"duplicate of bd-zzz"}
```

### Fields
- `id`: Issue ID (required)
- `ts`: ISO 8601 UTC timestamp (required)
- `by`: Actor who deleted (required)
- `reason`: Optional context ("cleanup", "duplicate of X", etc.)

### Import Logic
```
For each DB issue not in JSONL:
  1. Check deletions manifest → if found, delete from DB
  2. Fallback: check git history → if found, delete + backfill manifest
  3. Neither → keep (local unpushed work)
```

### Conflict Resolution
Simultaneous deletions from multiple clones are handled naturally:
- Append-only design means both clones append their deletion records
- On merge, file contains duplicate entries (same ID, different timestamps)
- `LoadDeletions` deduplicates by ID (keeps any/first entry)
- Result: deletion propagates correctly, duplicates are harmless

### Pruning Policy
- Default retention: 7 days (configurable via `deletions.retention_days`)
- Auto-compact during `bd sync` is **opt-in** (disabled by default)
- Hard cap: `deletions.max_entries` (default 50000)
- Git fallback handles pruned entries (self-healing)

### Self-Healing
When git fallback catches a resurrection (pruned entry), it backfills the manifest. One-time git scan cost, then fast again.

### Size Estimates
- ~80 bytes/entry
- 7-day retention with 100 deletions/day = ~56KB
- Git compressed: ~10KB

## Benefits
- ✅ Deletions propagate across clones
- ✅ O(1) lookup (no git scan in normal case)
- ✅ Works in shallow clones
- ✅ Survives history rewrite
- ✅ Audit trail (who deleted what when)
- ✅ Self-healing via git fallback
- ✅ Bounded size via time-based pruning

## References
- Investigation session: 2025-11-25
- Related: bd-2q6d (stale database warnings)


Add error handling guidance for export metadata update failures

## Problem
The bd-ymj fix treats all metadata update failures as warnings:

```go
if err := store.SetMetadata(ctx, "last_import_hash", currentHash); err != nil {
    log.log("Warning: failed to update last_import_hash: %v", err)
}
```

But if metadata updates fail, the NEXT export will fail with "JSONL content has changed since last import".

## Questions
1. Should metadata failures be critical (return error)?
2. Should we implement retry logic?
3. Is warning acceptable (safe, just requires import before next export)?

## Current Behavior
- Metadata failure is silent (only logged)
- User won't know until next export fails
- Next export requires import first (safe but annoying)

## Recommendation
Add clear comment explaining the trade-off:

```go
// Note: Metadata update failures are treated as warnings, not errors.
// This is acceptable because the worst case is the next export will
// require an import first, which is safe and prevents data loss.
// Alternative: Make this critical and fail the export if metadata
// updates fail (but this makes exports more fragile).
if err := store.SetMetadata(ctx, "last_import_hash", currentHash); err != nil {
    log.log("Warning: failed to update last_import_hash: %v", err)
    log.log("Next export may require running 'bd import' first")
}
```

## Files
- cmd/bd/daemon_sync.go

## Decision Needed
Choose approach based on failure mode preferences


Extract computeJSONLHash helper to eliminate code duplication

SHA256 hash computation is duplicated in 3 places:
- cmd/bd/integrity.go:50-52
- cmd/bd/sync.go:611-613
- cmd/bd/import.go:318-319

Extract to shared helper function computeJSONLHash(jsonlPath string) (string, error) that includes proper #nosec comment and error handling.


Investigate and upgrade to modernc.org/sqlite 1.39.1+

We had to pin modernc.org/sqlite to v1.38.2 due to a FOREIGN KEY constraint regression in v1.39.1 (SQLite 3.50.4).

**Issue:** [deleted:bd-47], GH #144

**Symptom:** CloseIssue fails with "FOREIGN KEY constraint failed (787)" when called via MCP/daemon, but works fine via CLI.

**Root Cause:** Unknown - likely stricter FK enforcement in SQLite 3.50.4 or modernc.org wrapper changes.

**Workaround:** Pinned to v1.38.2 (SQLite 3.49.x)

**TODO:**
1. Monitor modernc.org/sqlite releases for fixes
2. Check SQLite 3.50.5+ changelogs for FK-related fixes
3. Investigate why daemon mode fails but CLI succeeds (connection reuse? transaction isolation?)
4. Consider filing upstream issue with reproducible test case
5. Upgrade when safe


Auto-configure git merge driver during `bd init`

Enhance `bd init` to optionally set up beads-merge as git merge driver.

**Tasks**:
- Prompt user to install git merge driver
- Configure `.git/config`: `merge.beads.driver "bd merge %A %O %L %R"`
- Create/update `.gitattributes`: `.beads/beads.jsonl merge=beads`
- Add `--skip-merge-driver` flag for non-interactive use
- Update AGENTS.md onboarding section

**Files**:
- `cmd/bd/init.go`
- `.gitattributes` template


Run final validation and cleanup checks

Final validation pass to ensure all cleanup objectives met and no regressions introduced.

Validation checklist:
1. Dead code verification: `go run golang.org/x/tools/cmd/deadcode@latest -test ./...`
2. Test coverage: `go test -cover ./...`
3. Build verification: `go build ./cmd/bd/`
4. Linting: `golangci-lint run`
5. Integration tests
6. Metrics verification
7. Git clean check

Final metrics to report:
- LOC removed: ~____
- Files deleted: ____
- Files created: ____
- Test coverage: ____%
- Build time: ____ (before/after)
- Test run time: ____ (before/after)

Impact: Confirms all cleanup objectives achieved successfully

## Validation Results

**Dead Code:** ✅ Found and removed 1 unreachable function (`DroppedEventsCount`)
**Tests:** ✅ All pass
**Coverage:**
- Main: 39.6%
- cmd/bd: 20.2%
- Created follow-up issues (bd-85487065 through bd-bc2c6191) to improve coverage

**Build:** ✅ Clean
**Linting:** 73 issues (up from 34 baseline)
- Increase due to unused functions from refactoring
- Need cleanup in separate issue

**Integration Tests:** ✅ All pass
**Metrics:** 56,464 LOC across 193 Go files
**Git:** 2 files modified (deadcode fix + auto-synced JSONL)

## Follow-up Issues Created
- bd-85487065: Add tests for internal/autoimport (0% coverage)
- bd-0dcea000: Add tests for internal/importer (0% coverage)
- bd-4d7fca8a: Add tests for internal/utils (0% coverage)
- bd-6221bdcd: Improve cmd/bd coverage (20.2% -> target higher)
- bd-bc2c6191: Improve internal/daemon coverage (22.5% -> target higher)


Add transaction + retry logic for N-way collision resolution

## Problem
Current N-way collision resolution fails on UNIQUE constraint violations during convergence rounds when 5+ clones sync. The RemapCollisions function is non-atomic and performs operations sequentially:
1. Delete old issues (CASCADE deletes dependencies)
2. Create remapped issues (can fail with UNIQUE constraint)
3. Recreate dependencies
4. Update text references

Failure at step 2 leaves database in inconsistent state.

## Solution
Wrap collision resolution in database transaction with retry logic:
- Make entire RemapCollisions operation atomic
- Retry up to 3 times on UNIQUE constraint failures
- Re-sync counters between retries
- Add better error messages for debugging

## Implementation
Location: internal/storage/sqlite/collision.go:342 (RemapCollisions function)

```go
// Retry up to 3 times on UNIQUE constraint failures
for attempt := 0; attempt < 3; attempt++ {
    err := s.db.ExecInTransaction(func(tx *sql.Tx) error {
        // All collision resolution operations
    })
    if !isUniqueConstraintError(err) {
        return err
    }
    s.SyncAllCounters(ctx)
}
```

## Success Criteria
- 5-clone collision test passes reliably
- No partial state on UNIQUE constraint errors
- Automatic recovery from transient ID conflicts

## References
- See beads_nway_test.go:124 for the KNOWN LIMITATION comment
- Related to-7c5915ae (transaction support)

## Progress Made

1. Added `ExecInTransaction` helper to SQLiteStorage for atomic database operations
2. Added `IsUniqueConstraintError` function to detect UNIQUE constraint violations
3. Wrapped `RemapCollisions` with retry logic (up to 3 attempts) with counter sync between retries
4. Enhanced `handleRename` to detect and handle race conditions where target ID already exists
5. Added defensive checks for when old ID has been deleted by another clone

## Test Results

The changes improve N-way collision handling but don't fully solve the problem:
- Original error: `UNIQUE constraint failed: issues.id` during first convergence round
- With changes: Test proceeds further but encounters different collision scenarios
- New error: `target ID already exists with different content` in later convergence rounds

## Root Cause Analysis

The issue is more complex than initially thought. In N-way scenarios:
1. Clone A remaps bd-1c63eb84 → test-2 → test-4
2. Clone B remaps bd-1c63eb84 → test-3 → test-4
3. Both try to create test-4, but with different intermediate states
4. This creates legitimate content collisions that require additional resolution

## Next Steps

The full solution requires:
1. Making remapping fully deterministic across clones (same input → same remapped ID)
2. OR making `handleRename` more tolerant of mid-flight collisions
3. OR implementing full transaction support for multi-step collision resolution -7c5915ae)

The retry logic added here provides a foundation but isn't sufficient for complex N-way scenarios.


bd doctor --json flag not working

The --json flag on bd doctor command doesn't produce JSON output. It continues to show human-readable output instead. The flag is registered locally on doctorCmd but the code uses the global jsonOutput variable set by PersistentPreRun. Need to investigate why the flag isn't being honored.


Install and test MCP Agent Mail locally

Install MCP Agent Mail on a single development machine and verify basic functionality.

Acceptance Criteria:
- Server installed via one-line installer
- Server running on port 8765
- Can register a project via HTTP
- Can register an agent identity
- Web UI accessible at /mail

Tested local installation. Server runs on port 8765, web UI works. MCP API tool execution has errors - needs debugging. See /tmp/bd-muls-report.md for details.


Git history fallback missing timeout - could hang on large repos

## Problem

The git commands in `checkGitHistoryForDeletions` have no timeout. On large repos with extensive history, `git log --all -S` or `git log --all -G` can take a very long time (minutes).

## Location
`internal/importer/importer.go:899` and `:930`

## Impact
- Import could hang indefinitely
- User has no feedback that git search is running
- No way to cancel except killing the process

## Fix
Add context with timeout to git commands:

```go
ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second)
defer cancel()
cmd := exec.CommandContext(ctx, "git", ...)
```

Also consider adding a `--since` flag to bound the git history search.


Event-driven daemon architecture

Replace 5-second polling sync loop with event-driven architecture that reacts instantly to changes. Eliminates stale data issues while reducing CPU ~60%. Key components: FileWatcher (fsnotify), Debouncer (500ms), RPC mutation events, optional git hooks. Target latency: <500ms (vs 5000ms). See event_driven_daemon.md for full design.


Fix FOREIGN KEY constraint failures in AddComment and ApplyCompaction

The 'CloseIssue', 'UpdateIssueID', and 'RemoveLabel' methods were fixed in PR #348 to prevent foreign key constraint failures when operating on non-existent issues.

However, the Oracle identified two other methods that follow the same problematic pattern:
1. `AddComment` (in `internal/storage/sqlite/events.go`)
2. `ApplyCompaction` (in `internal/storage/sqlite/compact.go`)

These methods attempt to insert an event record after updating the issue, without verifying that the issue update actually affected any rows. This leads to a foreign key constraint failure if the issue does not exist.

We need to:
1. Create reproduction tests for these failure cases
2. Apply the same fix pattern: check `RowsAffected()` after the update, and return a proper "issue not found" error if it is 0, before attempting to insert the event.
3. Standardize the error message format to "issue %s not found" or "issue not found: %s" for consistency.


Convert magic numbers to named constants in FlushManager


bd-hv01: Three full JSONL reads on every sync (performance)

Problem: computeAcceptedDeletions reads three JSONL files completely into memory (base, left, merged). For 1000 issues at 1KB each, this is 3MB read and 3000 JSON parse operations.

Impact: Acceptable now (~20-35ms overhead) but will be slow for large repos (10k+ issues).

Possible optimizations: single-pass streaming, memory-mapped files, binary format, incremental snapshots.

Files: cmd/bd/deletion_tracking.go:101-208


Improve test coverage for cmd/bd/setup (28.4% → 50%)

The setup package has only 28.4% test coverage. Setup commands are critical for first-time user experience.

Current coverage: 28.4%
Target coverage: 50%


Implement tombstone types and schema migration

Add tombstone fields to Issue struct (deleted_at, deleted_by, delete_reason, original_type), add StatusTombstone constant, create SQLite migration for new columns. Per design bd-2m7.


bd sync --squash: batch multiple syncs into single commit

For solo developers who don't need real-time multi-agent coordination, add a --squash option to bd sync that accumulates changes and commits them in a single commit rather than one commit per sync.

This addresses the git history pollution concern (many 'bd sync: timestamp' commits) while preserving the default behavior needed for orchestration.

**Proposed behavior:**
- `bd sync --squash` accumulates pending exports
- Only commits when explicitly requested or on session end
- Default behavior unchanged (immediate commits for orchestration)

**Use case:** Solo developers who want cleaner git history but don't need real-time coordination between agents.

**Related:** PR #411 (docs: reduce bd sync commit pollution)
**See also:** Multi-repo support as alternative solution (docs/MULTI_REPO_AGENTS.md)


Test auto-start in fred


Add `bd merge` command wrapping 3-way merge logic

Implement CLI command to invoke beads-merge functionality.

**Interface**:
```bash
bd merge <output> <base> <left> <right>
bd merge --debug <output> <base> <left> <right>
```

**Behavior**:
- Exit code 0 on clean merge
- Exit code 1 if conflicts (write conflict markers)
- Support --debug flag for verbose output
- Match beads-merge's existing behavior

**File**: `cmd/bd/merge.go`


bd-hv01: No snapshot versioning or timestamps causes stale data usage

Problem: If sync is interrupted (crash, kill -9, power loss), stale snapshots persist indefinitely. Next sync uses stale data leading to incorrect deletions.

Fix: Add metadata to snapshots with timestamp, version, and commit SHA. Validate snapshots are recent (< 1 hour old), from compatible version, and from expected git commit.

Files: cmd/bd/deletion_tracking.go (all snapshot functions)


Add docs/architecture/event_driven.md

Copy event_driven_daemon.md into docs/ folder. Add to documentation index.


Add integration tests for multi-repo sync

Test: Clone A deletes issue, Clone B imports Clone A's JSONL. Verify Clone B handles deletion gracefully with resurrection. Test concurrent imports with same orphans (should be idempotent). Test round-trip fidelity (export→delete parent→import→verify structure).


Auto-routing and maintainer detection

Implement intelligent routing to automatically send new issues to correct repo based on user's maintainer vs contributor status, with discovered issues inheriting parent's source_repo.


Add bd daemon --stop-all command to kill all daemon processes

Currently there's no easy way to stop all running bd daemon processes. Users must resort to pkill -f 'bd daemon' or similar shell commands.

Add a --stop-all flag to bd daemon that:
1. Finds all running bd daemon processes (not just the current repo's daemon)
2. Gracefully stops them all
3. Reports how many were stopped

This is useful when:
- Multiple daemons are running and causing race conditions
- User wants a clean slate before running bd sync
- Debugging daemon-related issues


Create WASM build infrastructure (Makefile, scripts)

Set up build tooling for WASM compilation:
- Add GOOS=js GOARCH=wasm build target
- Copy wasm_exec.js from Go distribution
- Create wrapper script for Node.js execution
- Add build task to Makefile or build script


Documentation

Complete documentation for Agent Mail integration to enable adoption.


Add export test verifying tombstones are included in JSONL output

The export now includes tombstones (bd-dve) but there's no test that:
1. Creates issues in DB including a tombstone
2. Runs export
3. Verifies the JSONL contains the tombstone with all fields

Add a test: TestExportIncludesTombstones


Remove obsolete renumber.go command (hash IDs eliminated need)


bd cleanup fails with CHECK constraint on status/closed_at mismatch

## Problem

Running `bd cleanup --force` fails with:

```
Error: failed to create tombstone for bd-okh: sqlite3: constraint failed: CHECK constraint failed: (status = 'closed') = (closed_at IS NOT NULL)
```

## Root Cause

The database has a CHECK constraint ensuring closed issues have `closed_at` set and non-closed issues don't. When `bd cleanup` tries to convert a closed issue to a tombstone, this constraint fails if:
1. The issue has status='closed' but closed_at is NULL, OR
2. The issue is being converted but the tombstone creation doesn't properly handle the closed_at field

## Impact

- `bd cleanup --force` cannot complete
- 722 closed issues cannot be cleaned up
- Blocks routine maintenance

## Investigation Needed

1. Check the bd-okh record in the database:
   ```sql
   SELECT id, status, closed_at, deleted_at FROM issues WHERE id = 'bd-okh';
   ```
2. Determine if this is data corruption or a bug in tombstone creation

## Proposed Solutions

1. **If data corruption**: Add a `bd doctor --fix` check that repairs status/closed_at mismatches
2. **If code bug**: Fix the tombstone creation to properly handle the constraint

## Files to Investigate

- `internal/storage/sqlite/sqlite.go` - DeleteIssue / tombstone creation
- Schema CHECK constraint definition

## Acceptance Criteria

- [ ] Identify root cause (data vs code bug)
- [ ] `bd cleanup --force` completes successfully
- [ ] `bd doctor` detects status/closed_at mismatches


TestImportIssues_LegacyDeletionsConvertedToTombstones is failing

The test TestImportIssues_LegacyDeletionsConvertedToTombstones in internal/importer/importer_test.go is failing:

Expected 3 created (1 regular + 2 tombstones from deletions.jsonl), got 2
Expected tombstone for test-deleted2 not found

The test expects legacy deletions.jsonl entries to be converted to tombstones during import, but test-deleted2 is not being converted.

Location: internal/importer/importer_test.go:1344


Review PR #513: fix hooks install docs

Review and merge PR #513 from aspiers. This PR fixes incorrect docs for how to install git hooks - updates README to use bd hooks install instead of removed install.sh. Simple 1-line change. URL: https://github.com/anthropics/beads/pull/513


## Problem

bd cleanup deletes closed issues (converting them to tombstones) but does NOT prune expired tombstones. Users expect 'cleanup' to do comprehensive cleanup.

## Current Behavior

1. bd cleanup --force converts closed issues to tombstones
2. Expired tombstones (>30 days) remain in issues.jsonl
3. User must separately run bd compact to prune tombstones
4. bd doctor warns about expired tombstones: Run bd compact to prune

## Expected Behavior

bd cleanup should also prune expired tombstones from issues.jsonl.

## Impact

With v0.30.0 making tombstones the default migration path, this UX gap becomes more visible. Users cleaning up their database should not need to know about a separate bd compact command.

## Proposed Solution

Call pruneExpiredTombstones() at the end of the cleanup command (same function used by compact).

## Files to Modify

- cmd/bd/cleanup.go - Add call to pruneExpiredTombstones after deleteBatch

## Acceptance Criteria

- bd cleanup --force prunes expired tombstones after deleting closed issues
- bd cleanup --dry-run shows what tombstones would be pruned
- JSON output includes tombstone prune results


Override test

## Overview

[Describe the high-level goal and scope of this epic]

## Success Criteria

- [ ] Criteria 1
- [ ] Criteria 2
- [ ] Criteria 3

## Background

[Provide context and motivation]

## Scope

**In Scope:**
- Item 1
- Item 2

**Out of Scope:**
- Item 1
- Item 2


Fixture Generator for Realistic Test Data

Create internal/testutil/fixtures/fixtures.go with functions to generate realistic test data at scale.

Functions:
- LargeSQLite(storage) - 10K issues, native SQLite
- XLargeSQLite(storage) - 20K issues, native SQLite
- LargeFromJSONL(storage) - 10K issues imported from JSONL
- XLargeFromJSONL(storage) - 20K issues imported from JSONL

Data characteristics:
- Epic hierarchies (depth 4): Epic → Feature → Task → Subtask
- Cross-linked dependencies (tasks blocking across epics)
- Realistic status/priority/label distribution
- Representative assignees and temporal data

Implementation:
- Single file: internal/testutil/fixtures/fixtures.go
- No config structs, simple direct functions
- Seeded RNG for reproducibility
- Reusable by both benchmarks and tests


Add integration tests for adapter library

Test suite for beads_mail_adapter.py covering all scenarios.

Acceptance Criteria:
- Test enabled mode (server available)
- Test disabled mode (server unavailable)
- Test graceful degradation (server dies mid-operation)
- Test reservation conflicts
- Test message sending/receiving
- Mock HTTP server for testing
- 90%+ code coverage

File: lib/test_beads_mail_adapter.py

Test suite completed with 29 comprehensive tests covering:
- Enabled mode (server available): 10 tests
- Disabled mode (server unavailable): 2 tests
- Graceful degradation: 4 tests
- Reservation conflicts: 2 tests
- Configuration: 5 tests
- Health check scenarios: 3 tests
- HTTP error handling: 3 tests

**Performance**: All tests run in 10ms (fast!)

**Coverage highlights**:
✅ Server health checks (ok, degraded, error, timeout)
✅ All API operations (reserve, release, notify, check_inbox, get_reservations)
✅ HTTP errors (404, 409 conflict, 500, 503)
✅ Network errors (timeout, connection refused)
✅ Malformed responses (bad JSON, empty body, plain text errors)
✅ Environment variable configuration
✅ Graceful degradation when server dies mid-operation
✅ Conflict handling with both JSON and plain text errors
✅ Dict wrapper responses ({"messages": [...]} and {"reservations": [...]})
✅ Custom TTL for reservations
✅ Default agent name fallback

No external dependencies, no slow integration tests, just fast unit tests with mocks.


Dogfood: Migrate beads repo to hash IDs

Final validation: migrate the beads project itself to hash-based IDs.

## Purpose
Dogfooding the migration on beads' own issue database to:
1. Validate migration tool works on real data
2. Discover edge cases
3. Verify all workflows still work
4. Build confidence for users

## Pre-Migration Checklist
- [ ] All bd-f8b764c9 child tasks completed
- [ ] All tests pass: `go test ./...`
- [ ] Migration tool tested on test databases
- [ ] Documentation updated
- [ ] MCP server updated and published
- [ ] Clean git status

## Migration Steps

### 1. Create Backup
```bash
# Backup database
cp -r .beads .beads.backup-1761798568

# Backup JSONL
cp .beads/beads.jsonl .beads/beads.jsonl.backup

# Create git branch for migration
git checkout -b hash-id-migration
git add .beads.backup-*
git commit -m "Pre-migration backup"
```

### 2. Run Migration (Dry Run)
```bash
bd migrate --hash-ids --dry-run > migration-plan.txt
cat migration-plan.txt

# Review:
# - Number of issues to migrate
# - Hash collision check (should be zero)
# - Text reference updates
# - Dependency updates
```

### 3. Run Migration (Real)
```bash
bd migrate --hash-ids 2>&1 | tee migration-log.txt

# Expected output:
# ✓ Backup created: .beads/beads.db.backup-1234567890
# ✓ Generated 150 hash IDs
# ✓ No hash collisions detected
# ✓ Updated issues table schema
# ✓ Updated 150 issue IDs
# ✓ Updated 87 dependencies
# ✓ Updated 234 text references
# ✓ Exported to .beads/beads.jsonl
# ✓ Migration complete!
```

### 4. Validation

#### Database Integrity
```bash
# Check all issues have hash IDs
bd list | grep -v "bd-[a-f0-9]\{8\}" && echo "FAIL: Non-hash IDs found"

# Check all issues have aliases
sqlite3 .beads/beads.db "SELECT COUNT(*) FROM issues WHERE alias IS NULL"
# Should be 0

# Check no alias duplicates
sqlite3 .beads/beads.db "SELECT alias, COUNT(*) FROM issues GROUP BY alias HAVING COUNT(*) > 1"
# Should be empty
```

#### Functionality Tests
```bash
# Test show by hash ID
bd show bd-

# Test show by alias
bd show #1

# Test create new issue
bd create "Test issue after migration" -p 2
# Should get hash ID + alias

# Test update
bd update #1 --priority 1

# Test dependencies
bd dep tree #1

# Test export
bd export
git diff .beads/beads.jsonl
# Should show hash IDs
```

#### Text Reference Validation
```bash
# Check that old IDs were updated in descriptions
grep -r "bd-[0-9]\{1,3\}[^a-f0-9]" .beads/beads.jsonl && echo "FAIL: Old ID format found"

# Verify hash ID references exist
grep -o "bd-[a-f0-9]\{8\}" .beads/beads.jsonl | sort -u | wc -l
# Should match number of hash IDs
```

### 5. Commit Migration
```bash
git add .beads/beads.jsonl .beads/beads.db
git commit -m "Migrate to hash-based IDs (v2.0)

- Migrated 150 issues to hash IDs
- Preserved aliases (#1-#150)
- Updated 87 dependencies
- Updated 234 text references
- Zero hash collisions

Migration log: migration-log.txt"

git push origin hash-id-migration
```

### 6. Create PR
```bash
gh pr create --title "Migrate to hash-based IDs (v2.0)" --body "## Summary
Migrates beads project to hash-based IDs as part of v2.0 release.

## Migration Stats
- Issues migrated: 150
- Dependencies updated: 87
- Text references updated: 234
- Hash collisions: 0
- Aliases assigned: 150

## Validation
- ✅ All tests pass
- ✅ Database integrity verified
- ✅ All workflows tested (show, update, create, deps)
- ✅ Text references updated correctly
- ✅ Export produces valid JSONL

## Files Changed
- `.beads/beads.jsonl` - Hash IDs in all entries
- `.beads/beads.db` - Schema updated with aliases

## Rollback
If issues arise:
\`\`\`bash
mv .beads.backup-1234567890 .beads
bd export
\`\`\`

See migration-log.txt for full details."
```

### 7. Merge and Cleanup
```bash
# After PR approval
git checkout main
git merge hash-id-migration
git push origin main

# Tag release
git tag v2.0.0
git push origin v2.0.0

# Cleanup
rm migration-log.txt migration-plan.txt
git checkout .beads.backup-*  # Keep in git history
```

## Rollback Procedure
If migration fails or has issues:

```bash
# Restore backup
mv .beads .beads.failed-migration
mv .beads.backup-1234567890 .beads

# Regenerate JSONL
bd export

# Verify restoration
bd list
git diff .beads/beads.jsonl

# Cleanup
git checkout hash-id-migration
git reset --hard main
```

## Post-Migration Communication

### GitHub Issue/Discussion
```markdown
## Beads v2.0 Released: Hash-Based IDs

We've migrated beads to hash-based IDs! 🎉

**What changed:**
- Issues now use hash IDs (bd-af78e9a2) instead of sequential (bd-cb64c226.3)
- Human-friendly aliases (#42) for easy reference
- Zero collision risk in distributed workflows

**Action required:**
If you have a local clone, you need to migrate:

\`\`\`bash
git pull origin main
bd migrate --hash-ids
git push origin main
\`\`\`

See MIGRATION.md for details.

**Benefits:**
- ✅ No more ID collisions
- ✅ Work offline without coordination
- ✅ Simpler codebase (-2,100 LOC)

Questions? Reply here or see docs/HASH_IDS.md
```

## Success Criteria
- [ ] Migration completes without errors
- [ ] All validation checks pass
- [ ] PR merged to main
- [ ] v2.0.0 tagged and released
- [ ] Documentation updated
- [ ] Community notified
- [ ] No rollback needed within 1 week

## Files to Create
- migration-log.txt (transient)
- migration-plan.txt (transient)

## Timeline
Execute after all other bd-f8b764c9 tasks complete (estimated: ~8 weeks from start)


Sync should cleanup snapshot files after completion

## Problem
`bd sync` leaves orphaned merge artifact files (beads.base.jsonl, beads.left.jsonl) after completion, causing:
1. Doctor warnings about 'Multiple JSONL files found'
2. Confusion during debugging
3. Potential stale data issues on next sync

## Root Cause
`SnapshotManager` creates these files for 3-way merge deletion tracking but `Cleanup()` is never called after sync completes (success or failure).

## Fix
Call `SnapshotManager.Cleanup()` at end of successful sync:

```go
// sync.go after successful validation
sm := NewSnapshotManager(jsonlPath)
sm.Cleanup()
```

## Files
- cmd/bd/sync.go (add cleanup call)
- cmd/bd/snapshot_manager.go (Cleanup method exists at line 188)


Create tip system infrastructure for contextual hints

Implement a tip/hint system that shows helpful contextual messages after successful commands. This is different from the existing error-path "Hint:" messages - tips appear on success paths to educate users about features they might not know about.


Add bd reset command for clean slate restart

Implement a command to reset beads to a clean starting state.

**Context:** GitHub issue #479 - users sometimes get beads into an invalid state after updates, and there's no clean way to start fresh. The git backup/restore mechanism that protects against accidental deletion also makes it hard to intentionally reset.

**Current workaround** (from maphew):
```bash
bd daemons killall
git rm .beads/*.jsonl
git commit -m 'remove old issues'
rm .beads/*
bd init
bd onboard
```

**Desired:** A proper `bd reset` command that handles this cleanly and safely.


Add --json flags to all bd commands for agent-friendly output


Improve test coverage for cmd/bd/doctor/fix (23.9% → 50%)

The doctor/fix package has only 23.9% test coverage. The doctor fix functionality is important for troubleshooting.

Current coverage: 23.9%
Target coverage: 50%


Add integration tests for bd reset command

End-to-end integration tests for the reset command.

## Test Scenarios

### Basic reset
1. Init beads, create some issues
2. Run bd reset --force
3. Verify .beads/ is fresh, issues gone

### Hard reset
1. Init beads, create issues, commit
2. Run bd reset --hard --force
3. Verify git history has reset commits

### Backup functionality
1. Init beads, create issues
2. Run bd reset --backup --force
3. Verify backup exists with correct contents
4. Verify main .beads/ is reset

### Dry run
1. Init beads, create issues
2. Run bd reset --dry-run
3. Verify nothing changed

### Confirmation prompt
1. Init beads
2. Run bd reset (no --force)
3. Verify prompts for confirmation
4. Test both y and n responses

## Location
tests/integration/reset_test.go or similar


bd message: Refactor duplicated error messages


Fix compact --analyze/--apply error messages to clarify direct mode requirement

**Problem:**
When users run `bd compact --analyze` with daemon running, they get:
```
Error: compact requires SQLite storage
```

This is misleading because they ARE using SQLite (via daemon), but the command needs DIRECT SQLite access.

**Current behavior:**
- Error message suggests they don't have SQLite
- No hint about using --no-daemon flag
- Related to issue #349 item #1

**Proposed fix:**
1. Update error messages in cmd/bd/compact.go lines 106-114 (analyze) and 121-137 (apply)
2. Add explicit hint: "Use --no-daemon flag to bypass daemon"
3. Change SQLite check error from "requires SQLite storage" to "failed to open database in direct mode"

**Files to modify:**
- cmd/bd/compact.go (lines ~106-137)

**Testing:**
- Run with daemon: `bd compact --analyze` should show clear error + hint
- Run with --no-daemon: `bd compact --analyze --no-daemon` should work
- Verify error message is actionable


Test Epic 2


Add tests for merge driver auto-config in bd init

Add comprehensive tests for the merge driver auto-configuration functionality in `bd init`.

**Test cases needed:**
- Auto-install in quiet mode
- Skip with --skip-merge-driver flag
- Detect already-installed merge driver
- Append to existing .gitattributes
- Interactive prompt behavior (if feasible)

**File:** `cmd/bd/init_test.go`


Add content-addressable identity to Issue type

## Overview
Phase 1: Add content hashing to enable global identification of issues regardless of their assigned IDs.

## Current Problem
The system identifies issues only by ID (e.g., test-1, test-2). When multiple clones create the same ID with different content, there's no way to identify that these are semantically different issues without comparing all fields.

## Solution
Add a ContentHash field to the Issue type that represents the canonical content fingerprint.

## Implementation Tasks

### 1. Add ContentHash field to Issue type
File: internal/types/types.go
```go
type Issue struct {
    ID          string
    ContentHash string  // SHA256 of canonical content
    // ... existing fields
}
```

### 2. Add content hash computation method
Use existing hashIssueContent from collision.go:186 as foundation:
```go
func (i *Issue) ComputeContentHash() string {
    return hashIssueContent(i)
}
```

### 3. Compute hash at creation time
- Modify CreateIssue to compute and store ContentHash
- Modify CreateIssues (batch) to compute hashes

### 4. Compute hash at import time
- Modify ImportIssues to compute ContentHash for all incoming issues
- Store hash in database

### 5. Add database column
- Add migration to add content_hash column to issues table
- Update SELECT/INSERT statements to include content_hash
- Index on content_hash for fast lookups

### 6. Populate existing issues
- Add migration step to compute ContentHash for all existing issues
- Use hashIssueContent function

## Acceptance Criteria
- Issue type has ContentHash field
- Hash is computed automatically at creation time
- Hash is computed for imported issues
- Database stores content_hash column
- All existing issues have non-empty ContentHash
- Hash is deterministic (same content → same hash)
- Hash excludes ID, timestamps (only semantic content)

## Files to Modify
- internal/types/types.go
- internal/storage/sqlite/sqlite.go (schema, CreateIssue, CreateIssues)
- internal/storage/sqlite/migrations.go (new migration)
- internal/importer/importer.go (compute hash during import)
- cmd/bd/create.go (compute hash at creation)

## Testing
- Unit test: same content produces same hash
- Unit test: different content produces different hash
- Unit test: hash excludes ID and timestamps
- Integration test: hash persists in database
- Migration test: existing issues get hashes populated


mergePriority: negative priorities not handled consistently


Fix import failure on missing parent issues

Import process fails atomically when JSONL references deleted parent issues. Implement hybrid solution: topological sorting + parent resurrection to handle deleted parents gracefully while maintaining referential integrity. See docs/import-bug-analysis-bd-3xq.md for full analysis.


Update LINTING.md with current baseline

After cleanup, document the remaining acceptable baseline in LINTING.md so we can track regression.


Add tests for internal/importer package

Currently 0.0% coverage. Need tests for JSONL import logic including collision detection and resolution.


Add tombstone doctor checks

Add bd doctor checks for: unmigrated deletions.jsonl, stale deletions.jsonl in Phase 3, tombstones expiring soon. Per design bd-dli.


Feature P1


Remove duplicate countIssuesInJSONLFile function

init.go and doctor.go both defined countIssuesInJSONLFile. Removed the init.go version which is now unused. The doctor.go version (which calls countJSONLIssues) is the canonical implementation.


Isolate RPC server startup into rpc_server.go

Create internal/daemonrunner/rpc_server.go with StartRPC function. Move startRPCServer logic here and return typed handle.


cmd/bd tests fail without -short flag (parallel test deadlock)


sync branch not match config

./bd sync
→ Exporting pending changes to JSONL...
→ No changes to commit
→ Pulling from sync branch 'gh-386'...
Error pulling from sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/worktree-db-fail/.git: not a directory
matt@blufin-framation ~/d/b/worktree-db-fail (worktree-db-fail) [1]> bd config list

Configuration:
  auto_compact_enabled = false
  compact_batch_size = 50
  compact_model = claude-3-5-haiku-20241022
  compact_parallel_workers = 5
  compact_tier1_days = 30
  compact_tier1_dep_levels = 2
  compact_tier2_commits = 100
  compact_tier2_days = 90
  compact_tier2_dep_levels = 5
  compaction_enabled = false
  issue_prefix = worktree-db-fail
  sync.branch = worktree-db-fail


Import overwrites newer local issues with older remote versions

## Problem

During git pull + import, local issues with newer updated_at timestamps get overwritten by older versions from remote JSONL.

## What Happened

Timeline:
1. 17:52 - Closed bd-df190564 and bd-b501fcc1 locally (updated_at: 2025-10-31)
2. 17:51 - Remote pushed same issues with status=open (updated_at: 2025-10-30)
3. 17:52 - Local sync pulled remote commit and imported JSONL
4. Result: Issues reverted to open despite local version being newer

## Root Cause

DetectCollisions (internal/storage/sqlite/collision.go:67-79) compares fields but doesn't check timestamps:

```go
conflictingFields := compareIssues(existing, incoming)
if len(conflictingFields) == 0 {
    result.ExactMatches = append(result.ExactMatches, incoming.ID)
} else {
    // Same ID, different content - treats as UPDATE
    result.Collisions = append(result.Collisions, &CollisionDetail{...})
}
```

Import applies incoming version regardless of which is newer.

## Expected Behavior

Import should:
1. Compare updated_at timestamps when collision detected
2. Skip update if local version is newer
3. Apply update only if remote version is newer
4. Warn on timestamp conflicts

## Solution

Add timestamp checking to DetectCollisions or importIssues:

```go
if len(conflictingFields) > 0 {
    // Check timestamps
    if !incoming.UpdatedAt.After(existing.UpdatedAt) {
        // Local is newer or same - skip update
        result.ExactMatches = append(result.ExactMatches, incoming.ID)
        continue
    }
    // Remote is newer - apply update
    result.Collisions = append(result.Collisions, &CollisionDetail{...})
}
```

## Files
- internal/storage/sqlite/collision.go
- internal/importer/importer.go

## References
- Discovered during bd-df190564, bd-b501fcc1 re-opening


Doctor: exclude merge artifacts from 'multiple JSONL' warning

## Problem
`bd doctor` warns about 'Multiple JSONL files found' when merge artifact files exist:
```
JSONL Files: Multiple JSONL files found: beads.base.jsonl, beads.left.jsonl, issues.jsonl ⚠
```

This is confusing because these aren't real issue JSONL files - they're temporary snapshots for deletion tracking.

## Fix
Exclude known merge artifact patterns from the multiple-JSONL warning:

```go
// In doctor JSONL check
skipPatterns := map[string]bool{
    "beads.base.jsonl": true,
    "beads.left.jsonl": true,
    "beads.right.jsonl": true,
}
```

## Files
- cmd/bd/doctor/ (JSONL check logic)


Review PR #512: clarify bd ready docs

Review and merge PR #512 from aspiers. This PR clarifies what bd ready does after git pull in README.md. Simple 1-line change. URL: https://github.com/anthropics/beads/pull/512


Missing test for PullResult.SafetyWarnings population


bd doctor: add configuration value validation

Currently bd doctor checks for missing config files but doesn't validate config values. Add validation for: invalid priority values, malformed sync intervals, invalid branch names, unsupported storage backends, etc. This would catch misconfigurations before they cause runtime errors.


Prefix detection treats embedded hyphens as prefix delimiters

The prefix detection logic in bd import incorrectly identifies issues like 'vc-baseline-test' and 'vc-92cl-gate-test' as having different prefixes ('vc-baseline-' and 'vc-92cl-gate-') instead of recognizing them as having the standard 'vc-' prefix with hyphenated suffixes.

This breaks import with error: 'prefix mismatch detected: database uses vc- but found issues with prefixes: [vc-92cl-gate- (1 issues) vc-baseline- (1 issues)]'

The prefix should be determined by the pattern: prefix is everything up to and including the first hyphen. The suffix can contain hyphens without being treated as part of the prefix.

Example problematic IDs:
- vc-baseline-test (detected as prefix: vc-baseline-)
- vc-92cl-gate-test (detected as prefix: vc-92cl-gate-)
- vc-test (correctly detected as prefix: vc-)

Impact: Users cannot use descriptive multi-part IDs without triggering false prefix mismatch errors.


Merge PR #300: gitignore upgrade feature

PR #300 is ready to merge but has rebase conflicts with main.

**Context:**
- PR implements 3 mechanisms for .beads/.gitignore upgrade (bd doctor --fix, daemon auto-upgrade, bd init idempotent)
- Conflicts resolved locally but diverged branches make push difficult
- All fixes applied: removed merge artifact, applied new gitignore template
- Clean scope: only 6 files changed (+194/-42)

**Next steps:**
1. Option A: Merge via GitHub UI (resolve conflicts in web interface)
2. Option B: Fresh rebase on main and force push
3. Verify CI passes
4. Squash and merge

PR URL: https://github.com/steveyegge/beads/pull/300
Fixes: #274


GH#243: Recurring stale daemon.lock causes 5s delays

User reports daemon.lock keeps becoming stale after running Claude with beads.

Symptom:
- bd ready takes 5 seconds (exact)
- daemon.lock exists but socket is missing
- bd daemons killall temporarily fixes it
- Problem recurs after using beads with AI agents

User on v0.22.0, Macbook M2, 132 issues (89 closed)

Hypothesis: Daemon is crashing or exiting uncleanly during agent sessions, leaving stale lock file.

Need to:
1. Add crash logging to daemon to understand why it's exiting
2. Improve cleanup on daemon exit (ensure lock is always removed)
3. Add automatic stale lock detection/cleanup
4. Consider making daemon more resilient to crashes

Oracle analysis complete. Converting to epic with 5 focused sub-issues:
1. RPC fast-fail with socket stat + short timeouts (P0)
2. Standardize daemon detection with lock probe (P1)
3. Crash recovery improvements (P2)
4. Self-heal stale artifacts (P2)
5. Diagnostics and debugging (P3)


Time-dependent tests may be flaky near TTL boundary

Several tombstone merge tests use time.Now() to create test data: time.Now().Add(-24 * time.Hour), time.Now().Add(-60 * 24 * time.Hour), etc. While these work reliably in practice (24h vs 30d TTL has large margin), they could theoretically be flaky if: 1) Tests run slowly, 2) System clock changes during test, 3) TTL constants change. Recommendation: Consider using a fixed reference time or time injection for deterministic tests. Lower priority since current margin is large. Files: internal/merge/merge_test.go:1337-1338, 1352-1353, 1548-1549, 1590-1591


GH#509: bd fails to find .beads from nested worktrees

findDatabaseInTree stops at worktree git root, missing .beads in parent repo. Should check git-common-dir and search past worktree root. See: https://github.com/steveyegge/beads/issues/509


Make two-clone workflow actually work (no hacks)

TestTwoCloneCollision proves beads CANNOT handle two independent clones filing issues simultaneously. This is the basic collaborative workflow and it must work cleanly.

Test location: beads_twoclone_test.go

The test creates two git clones, both file issues with same ID (test-1), --resolve-collisions remaps clone B's to test-2, but after sync:
- Clone A has test-1="Issue from clone A", test-2="Issue from clone B"
- Clone B has test-1="Issue from clone B", test-2="Issue from clone A"

The TITLES are swapped! Both clones have 2 issues but with opposite title assignments.

We've tried many fixes (per-project daemons, auto-sync, lamport hashing, precommit hooks) but nothing has made the test pass.

Goal: Make the test pass WITHOUT hacks. The two clones should converge to identical state after sync.

**Major progress achieved!** The two-clone workflow now converges correctly.

**What was fixed:**
--3d844c58: Implemented content-hash based rename detection
- bd-64c05d00.1: Fixed test to compare content not timestamps
- Both clones now converge to identical issue databases
- test-1 and test-2 have correct titles in both clones
- No more title swapping!

**Current status (VERIFIED):**
✅ Acceptance criteria 1: TestTwoCloneCollision passes (confirmed Oct 28)
✅ Acceptance criteria 2: Both clones converge to identical issue database (content matches)
✅ Acceptance criteria 3: No manual conflict resolution required (automatic)
✅ Acceptance criteria 4: Git status clean
✅ Acceptance criteria 5: bd ready output identical (timestamps are expected difference)

**ALL ACCEPTANCE CRITERIA MET!** This issue is complete and can be closed.


Add UNIQUE constraint on external_ref column

The external_ref column should have a UNIQUE constraint to prevent multiple issues from having the same external reference. This ensures data integrity when syncing from external systems (Jira, GitHub, Linear).

Current behavior:
- Multiple issues can have the same external_ref
- GetIssueByExternalRef returns first match (non-deterministic with duplicates)

Proposed solution:
- Add UNIQUE constraint to external_ref column
- Add migration to check for and resolve existing duplicates
- Update tests to verify constraint enforcement

Related: bd-1022


Debug test


Fix bd doctor --fix recursive message for deletions manifest

When running bd doctor --fix, if the deletions manifest check fails but there are no deleted issues in git history, the fix succeeds but doesn't create the file. The check then runs again and tells user to run bd doctor --fix - the same command they just ran.

Fix: Create empty deletions.jsonl when hydration finds no deletions, and recognize empty file as valid in the check.

Fixes: https://github.com/steveyegge/beads/issues/403


Add transaction helper to replace manual COMMIT/ROLLBACK

Create tx.go with withTx helper that handles transaction lifecycle. Replace manual transaction blocks in create/insert/update paths.

Refactoring complete:
- Created withTx() helper in util.go
- Added ExecInTransaction() as deprecated wrapper for backward compatibility
- Refactored all manual transaction blocks to use withTx():
  - events.go: AddComment
  - dirty.go: MarkIssuesDirty, ClearDirtyIssuesByID
  - labels.go: executeLabelOperation
  - dependencies.go: AddDependency, RemoveDependency
  - compact.go: ApplyCompaction
- All tests pass successfully


Replace getStorageForRequest with Direct Access

Replace all getStorageForRequest(req) calls with s.storage


Imperator clone on beads-sync branch causes bd sync failures


Investigate database pollution - unexpected issue count increases

Two repositories showing unexpected issue counts:
- ~/src/beads: 280 issues (expected ~209-220)
- ~/src/dave/beads: 895 issues (675 open, 149 closed)

This suggests database pollution - issues from one repository leaking into another. Need to investigate:
1. Run bd detect-pollution on both repos
2. Check for cross-repo contamination
3. Identify source of pollution (daemon? multi-repo config? import issues?)
4. Clean up polluted databases
5. Prevent future pollution


Test: N-clone scenario with hash IDs (no collisions)

Comprehensive test to verify hash IDs eliminate collision problems.

## Test: TestHashIDsNClones

### Purpose
Verify that N clones can work offline and sync without ID collisions using hash IDs.

### Test Scenario
```
Setup:
- 1 bare remote repo
- 5 clones (A, B, C, D, E)

Offline Work:
- Each clone creates 10 issues with different titles
- No coordination, no network access
- Total: 50 unique issues

Sync:
- Clones sync in random order
- Each pull/import other clones' issues

Expected Result:
- All 5 clones converge to 50 issues
- Zero ID collisions
- Zero remapping needed
- Alias conflicts resolved deterministically
```

### Implementation
File: cmd/bd/beads_hashid_test.go (new)

```go
func TestHashIDsFiveClones(t *testing.T) {
    tmpDir := t.TempDir()
    remoteDir := setupBareRepo(t, tmpDir)

    // Setup 5 clones
    clones := make(map[string]string)
    for _, name := range []string{"A", "B", "C", "D", "E"} {
        clones[name] = setupClone(t, tmpDir, remoteDir, name)
    }

    // Each clone creates 10 issues offline
    for name, dir := range clones {
        for i := 0; i < 10; i++ {
            createIssue(t, dir, fmt.Sprintf("%s-issue-%d", name, i))
        }
        // No sync yet!
    }

    // Sync in random order
    syncOrder := []string{"C", "A", "E", "B", "D"}
    for _, name := range syncOrder {
        syncClone(t, clones[name], name)
    }

    // Final convergence round
    for _, name := range []string{"A", "B", "C", "D", "E"} {
        finalPull(t, clones[name], name)
    }

    // Verify all clones have all 50 issues
    for name, dir := range clones {
        issues := getIssues(t, dir)
        if len(issues) != 50 {
            t.Errorf("Clone %s: expected 50 issues, got %d", name, len(issues))
        }

        // Verify all issue IDs are hash-based
        for _, issue := range issues {
            if !strings.HasPrefix(issue.ID, "bd-") || len(issue.ID) != 11 {
                t.Errorf("Invalid hash ID: %s", issue.ID)
            }
        }
    }

    // Verify no collision resolution occurred
    // (This would be in logs if it happened)

    t.Log("✓ All 5 clones converged to 50 issues with zero collisions")
}
```

### Edge Case Tests

#### Test: Hash Collision Detection (Artificial)
```go
func TestHashCollisionDetection(t *testing.T) {
    // Artificially inject collision by mocking hash function
    // Verify system detects and handles it
}
```

#### Test: Alias Conflicts Resolved Deterministically
```go
func TestAliasConflictsNClones(t *testing.T) {
    // Two clones assign same alias to different issues
    // Verify deterministic resolution (content-hash ordering)
    // Verify all clones converge to same alias assignments
}
```

#### Test: Mixed Sequential and Hash IDs (Should Fail)
```go
func TestMixedIDsRejected(t *testing.T) {
    // Try to import JSONL with sequential IDs into hash-ID database
    // Verify error or warning
}
```

### Performance Test

#### Benchmark: Hash ID Generation
```go
func BenchmarkHashIDGeneration(b *testing.B) {
    for i := 0; i < b.N; i++ {
        GenerateHashID("title", "description", time.Now(), "workspace-id")
    }
}

// Expected: < 1μs per generation
```

#### Benchmark: N-Clone Convergence Time
```go
func BenchmarkNCloneConvergence(b *testing.B) {
    for _, n := range []int{3, 5, 10, 20} {
        b.Run(fmt.Sprintf("N=%d", n), func(b *testing.B) {
            // Measure total convergence time
        })
    }
}

// Expected: Linear scaling O(N)
```

### Acceptance Criteria
- TestHashIDsFiveClones passes reliably (10/10 runs)
- Zero ID collisions in any scenario
- All clones converge in single round (not multi-round like old system)
- Alias conflicts resolved deterministically
- Performance benchmarks meet targets (<1μs hash gen)

## Files to Create
- cmd/bd/beads_hashid_test.go

## Comparison to Old System
This test replaces:
- TestTwoCloneCollision (bd-71107098) - no longer needed
- TestThreeCloneCollision (bd-cbed9619) - no longer needed
- TestFiveCloneCollision (bd-a40f374f) - no longer needed

Old system required complex collision resolution and multi-round convergence.
New system: single-round convergence with zero collisions.


Add t.Parallel() to slow hash multiclone tests

Add t.Parallel() to TestHashIDs_MultiCloneConverge and TestHashIDs_IdenticalContentDedup so they run concurrently.

Expected savings: ~10 seconds (from 20s to ~11s)

Implementation:
- Add t.Parallel() call at start of each test function
- Verify tests don't share resources that would cause conflicts
- Run tests to confirm they work in parallel

File: beads_hash_multiclone_test.go:34, :101


Sync branch integrity guards

Track sync branch parent commit. If sync branch was force-pushed, warn user and require confirmation before proceeding. Add option to reset to remote if user accepts rebase. Prevents silent corruption from forced pushes.


Add comprehensive tests for sync branch daemon logic

The daemon sync branch functionality (bd-6545) was implemented but needs proper end-to-end testing.

Current implementation:
- daemon_sync_branch.go has syncBranchCommitAndPush() and syncBranchPull()
- daemon_sync.go has been updated to use these functions when sync.branch is configured
- All daemon tests pass, but no specific tests for sync branch behavior

Testing needed:
- Test that daemon commits to sync branch when sync.branch is configured
- Test that daemon commits to current branch when sync.branch is NOT configured (backward compatibility)
- Test that daemon pulls from sync branch and syncs JSONL back to main repo
- Test worktree creation and health checks during daemon operations
- Test error handling (missing branch, worktree corruption, etc.)

Key challenge: Tests need to run in the context of the git repo (getGitRoot() uses current working directory), so test setup needs to properly change directory or mock the git root detection.

Reference existing daemon tests in daemon_test.go and daemon_autoimport_test.go for patterns.


Mass deletion logging for forensics

Log detailed information when the safety check triggers during auto-push.

When >50% issues vanish AND >5 existed:
- Log which issues vanished
- Log the before/after counts
- Log timestamp for forensic analysis

This gives users visibility into what happened if something goes wrong, without blocking the sync.

Location: internal/syncbranch/worktree.go
Parent issue: bd-3s8


Default to YES for git hooks and merge driver installation

Currently bd init prompts user to install git hooks and merge driver, but setup is incomplete if user declines. Change to install by default unless --skip-hooks or --skip-merge-driver flags are passed. Better safe defaults. If installation fails, warn user and suggest bd doctor --fix.


bd export only outputs 1 issue after auto-import corrupts database

When auto-import runs and purges issues (due to git history backfill bug), subsequent 'bd export' only exports 1 issue even though the database should have many.

Reproduction:
1. Have issues.jsonl with 55 issues
2. Auto-import triggers and purges all issues via git history backfill
3. Run 'bd export' - only exports 1 issue (the last one created before corruption)

The database gets into an inconsistent state where most issues are purged but export doesn't realize this.

Workaround: Rebuild database from scratch with 'rm .beads/beads.db && bd init --prefix bd'


Fix hasJSONLChanged to support per-repo metadata keys

## Problem
After bd-ar2.2, we store metadata with per-repo keys like `last_import_hash:<path>`, but `hasJSONLChanged` and `validatePreExport` still only check global keys.

## Impact
- Multi-repo mode won't benefit from bd-ymj fix
- validatePreExport will fail incorrectly or pass incorrectly
- Metadata updates are written but never read

## Location
- cmd/bd/integrity.go:97 (hasJSONLChanged)
- cmd/bd/integrity.go:138 (validatePreExport)

## Solution
Update hasJSONLChanged to accept optional keySuffix parameter:
```go
func hasJSONLChanged(ctx context.Context, store storage.Storage, jsonlPath string, keySuffix string) bool {
    // Build metadata keys with optional suffix
    hashKey := "last_import_hash"
    mtimeKey := "last_import_mtime"
    if keySuffix != "" {
        hashKey += ":" + keySuffix
        mtimeKey += ":" + keySuffix
    }
    // ... rest of function
}
```

Update all callers to pass correct keySuffix.


Expand checkHooksQuick to verify all hook versions

Currently checkHooksQuick only checks post-merge hook version. Should also check pre-commit, pre-push, and post-checkout for completeness. Keep it lightweight but catch more outdated hooks.


Create Docker image for Agent Mail

Containerize Agent Mail server for easy deployment.

Acceptance Criteria:
- Dockerfile with Python 3.14
- Health check endpoint
- Volume mount for storage
- Environment variable configuration
- Multi-arch builds (amd64, arm64)

File: deployment/agent-mail/Dockerfile


Fix variable shadowing in GetNextChildID resurrection code

## Problem
Minor variable shadowing in hash_ids.go:

```go
// Line 33: err declared here
err := s.db.QueryRowContext(ctx, `SELECT COUNT(*) FROM issues WHERE id = ?`, parentID).Scan(&count)

// Line 38: err reused/shadowed here
resurrected, err := s.TryResurrectParent(ctx, parentID)
```

While Go allows this, it can be confusing and some linters flag it.

## Solution
Use different variable name:

```go
resurrected, resurrectErr := s.TryResurrectParent(ctx, parentID)
if resurrectErr != nil {
    return "", fmt.Errorf("failed to resurrect parent %s: %w", parentID, resurrectErr)
}
```

## Files
- internal/storage/sqlite/hash_ids.go:38

## Priority
Low - code works correctly, just a style improvement


Daemon gets stuck when auto-import blocked by git conflicts

CRITICAL: The daemon enters a corrupt state that breaks RPC commands when auto-import is triggered but git pull fails due to uncommitted changes.

Impact: This is a data integrity and usability issue that could cause users to lose trust in Beads. The daemon silently fails for certain commands while appearing healthy.

Reproduction:
1. Make local changes to issues (creates uncommitted .beads/beads.jsonl)
2. Remote has updates (JSONL newer, triggers auto-import)
3. Daemon tries to pull but fails: 'cannot pull with rebase: You have unstaged changes'
4. Daemon enters bad state - 'bd show' and other commands return EOF
5. 'bd list' still works, daemon process is running, no errors logged

Technical details:
- Auto-import check runs in handleRequest() before processing RPC commands
- When import is blocked, it appears to corrupt daemon state
- Likely: deadlock, unclosed transaction, or storage handle corruption
- Panic recovery (server_lifecycle_conn.go:183) didn't catch anything - not a panic

Required fix:
- Auto-import must not block RPC command execution
- Handle git pull failures gracefully without corrupting state
- Consider: skip auto-import if git is dirty, queue import for later, or use separate goroutine
- Add timeout/circuit breaker for import operations
- Log clear warnings when auto-import is skipped

Without this fix, users in collaborative environments will frequently encounter mysterious EOF errors that require daemon restarts.


Fix TestFallbackToDirectModeEnablesFlush deadlock causing 10min test timeout

## Problem

TestFallbackToDirectModeEnablesFlush in direct_mode_test.go deadlocks for 9m59s before timing out, causing the entire test suite to take 10+ minutes instead of <10 seconds.

## Root Cause

Database lock contention between test cleanup and flushToJSONL():
- Test cleanup (line 36) tries to close DB via defer
- flushToJSONL() (line 132) is still accessing DB
- Results in deadlock: database/sql.(*DB).Close() waits for mutex while GetJSONLFileHash() holds it

## Stack Trace Evidence

```
goroutine 512 [sync.Mutex.Lock, 9 minutes]:
database/sql.(*DB).Close(0x14000643790)
  .../database/sql/sql.go:927 +0x84
github.com/steveyegge/beads/cmd/bd.TestFallbackToDirectModeEnablesFlush.func1()
  .../direct_mode_test.go:36 +0xf4

While goroutine running flushToJSONL() holds DB connection via GetJSONLFileHash()
```

## Impact

- Test suite: 10+ minutes → should be <10 seconds
- ALL other tests pass in ~4 seconds
- This ONE test accounts for 99.9% of test runtime

## Related

This is the EXACT same issue documented in MAIN_TEST_REFACTOR_NOTES.md for why main_test.go refactoring was deferred - global state manipulation + DB cleanup = deadlock.

## Fix Approaches

1. **Add proper cleanup sequencing** - stop flush goroutines BEFORE closing DB
2. **Use test-specific DB lifecycle** - ensure flush completes before cleanup
3. **Mock the flush mechanism** - avoid real DB for testing this code path
4. **Add explicit timeout handling** - fail fast with clear error instead of hanging

## Files

- cmd/bd/direct_mode_test.go:36-132
- cmd/bd/autoflush.go:353 (validateJSONLIntegrity)
- cmd/bd/autoflush.go:508 (flushToJSONLWithState)

## Acceptance

- Test passes without timeout
- Test suite completes in <10 seconds
- No deadlock between cleanup and flush operations


Delete server_cache_storage.go

Remove the entire cache implementation file (~286 lines)