Optimize GetReadyWork performance - 752ms on 10K database (target: <50ms)

# Performance Analysis (10K Issue Database)

Analyzed using CPU profiles from benchmark suite on Apple M2 Pro.

## Operation Performance

| Operation                        | Time    | Allocations | Memory |
|----------------------------------|---------|-------------|--------|
| bd ready (GetReadyWork)          | ~752ms  | 167,466     | 16MB   |
| bd list (SearchIssues no filter) | ~11.6ms | 89,214      | 5.8MB  |
| bd list (SearchIssues filtered)  | ~9.2ms  | 62,365      | 3.5MB  |
| bd create (CreateIssue)          | ~2.6ms  | 146         | 8.6KB  |
| bd update (UpdateIssue)          | ~0.32ms | 364         | 15KB   |
| bd close (UpdateIssue)           | ~0.32ms | 364         | 15KB   |

**Target: <50ms for all operations on 10K database**

**Current issue: GetReadyWork is 15x over target (752ms vs 50ms)**

## Root Cause

GetReadyWork (internal/storage/sqlite/ready.go:90-128) uses recursive CTE to propagate blocking:
- 65x slower than SearchIssues
- Recalculates entire blocked issue tree on every call
- Algorithm:
  1. Find directly blocked issues via 'blocks' dependencies
  2. Recursively propagate blockage to descendants (max depth: 50)
  3. Exclude all blocked issues from results

## CPU Profile Analysis

- Database syscalls (pthread_cond_signal, syscall6): ~75%
- SQLite engine overhead: inherent to recursive CTE
- Application code (query construction): <1%

**Bottleneck is the recursive CTE query execution, not application code.**

## Optimization Recommendations

### High Impact (Likely to achieve <50ms target)

1. **Cache blocked issue calculation**
   - Add `blocked_issues` table updated on dependency changes
   - Trade write complexity for read speed (ready called >> dependency changes)
   - Eliminates recursive CTE on every read

2. **Add/verify database indexes**
   ```sql
   CREATE INDEX IF NOT EXISTS idx_dependencies_blocked
     ON dependencies(issue_id, type, depends_on_id);
   CREATE INDEX IF NOT EXISTS idx_issues_status
     ON issues(status);
   ```

### Medium Impact

3. **Reduce allocations** (167K allocations for GetReadyWork)
   - Profile `scanIssues()` for object pooling opportunities
   - Reuse slice capacity for repeated calls

### Low Impact (Not recommended)
- Query optimization for CRUD operations (already <3ms)
- Connection pooling tuning (not showing in profiles)

## Verification

Run benchmarks to validate optimization:
```bash
make bench-quick
go tool pprof -http=:8080 internal/storage/sqlite/bench-cpu-*.prof
```

Profile files automatically generated in `internal/storage/sqlite/`.


Add uninstall documentation (GH #445)


Add unit tests for reset package

Comprehensive unit tests for internal/reset package.

## Test Cases

### ValidateState tests
- .beads/ exists → success
- .beads/ missing → appropriate error
- git dirty state detection

### CountImpact tests
- Empty .beads/ → zero counts
- With issues → correct count (open vs closed)
- With tombstones → correct count
- Returns HasUncommitted correctly

### Backup tests
- Creates backup with correct timestamp format
- Preserves all files and permissions
- Returns correct path
- Handles missing .beads/ gracefully
- Errors on pre-existing backup dir

### Git operation tests
- CheckGitState detects dirty, detached, not-a-repo
- GitRemoveBeads removes correct files
- GitCommitReset creates commit with message
- Operations skip gracefully when not in git repo

### Reset tests (with mocks/temp dirs)
- Soft reset removes files, calls init
- Hard reset includes git operations
- Dry run doesn't modify anything
- SkipInit flag prevents re-initialization
- Daemon killall is called
- Backup is created when requested

## Approach
- Can start with interface definitions (TDD style)
- Use testify for assertions
- Create temp directories for isolation
- Mock git operations where needed
- Test completion depends on implementation tasks

## File Location
`internal/reset/reset_test.go`
`internal/reset/backup_test.go`
`internal/reset/git_test.go`


Add global verbosity flags (--verbose, --quiet)

Add consistent verbosity controls across all commands.

**Current state:**
- bd init has --quiet flag
- No other commands have verbosity controls
- Debug output controlled by BD_VERBOSE env var

**Proposal:**
Add persistent flags:
- --verbose / -v: Enable debug output
- --quiet / -q: Suppress non-essential output

**Implementation:**
- Add to rootCmd.PersistentFlags()
- Replace BD_VERBOSE checks with flag checks
- Standardize output levels:
  * Quiet: Errors only
  * Normal: Errors + success messages
  * Verbose: Errors + success + debug info

**Files to modify:**
- cmd/bd/main.go (add flags)
- internal/debug/debug.go (respect flags)
- Update all commands to respect quiet mode

**Testing:**
- Verify --verbose shows debug output
- Verify --quiet suppresses normal output
- Ensure errors always show regardless of mode


GH#483: Pre-commit hook should not fail when .beads exists but bd sync fails

Pre-commit hook exit 1 on bd sync --flush-only failure blocks commits even when user removed beads but .beads dir reappears. Should warn not fail. See: https://github.com/steveyegge/beads/issues/483


Review and document rarely-used commands

Document use cases or consider deprecation for infrequently-used commands.

**Commands to review:**
1. bd rename-prefix - How often is this used? Document use cases
2. bd detect-pollution - Consider integrating into bd validate
3. bd migrate-hash-ids - One-time migration, keep but document as legacy

**For each command:**
- Document typical use cases
- Add examples to help text
- Consider if it should be a subcommand instead
- Add deprecation warning if appropriate

**Not changing:**
- duplicates ✓ (useful for data quality)
- repair-deps ✓ (useful for fixing broken refs)
- restore ✓ (critical for compacted issues)
- compact ✓ (performance feature)

**Deliverable:**
- Updated help text
- Documentation in ADVANCED.md
- Deprecation plan if needed


Inconsistent stderr printing: bd-feh warning still prints directly


Auto-resolve all field conflicts in merge.go

Eliminate manual conflict resolution by adding deterministic auto-resolve rules for all fields:

- Priority: higher priority wins (lower number = more urgent)
- IssueType: local wins
- Notes: concatenate both sides with separator
- Title: side with latest updated_at on the issue wins
- Description: side with latest updated_at on the issue wins

Currently true conflicts (both sides changed same field to different values) fail sync. With this change, NO conflicts ever require manual resolution.

Location: internal/merge/merge.go
Parent issue: bd-3s8


> bd sync --no-daemon
→ Exporting pending changes to JSONL...
→ Committing changes to sync branch 'beads-sync'...
Error committing to sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/fix-ci/.git: not a directory

**Problem Diagnosed**: The `bd sync` command was failing with "mkdir /var/home/matt/dev/beads/fix-ci/.git: not a directory" because it was being executed from the wrong directory.

**Root Cause**: The command was run from `/var/home/matt/dev/beads` (where the `fix-ci` worktree exists) instead of the main repository directory `/var/home/matt/dev/beads/main`. Since `fix-ci` is a git worktree with a `.git` file (not directory), the worktree creation logic failed when trying to create `<current_dir>/.git/beads-worktrees/<branch>`.

**Solution Verified**: Execute `bd sync` from the main repository directory:
```bash
cd main && bd sync --dry-run
```


No logging/debugging for tombstone resurrection events

Per the design document bd-zvg Open Question 1: Should resurrection log a warning? Recommendation was Yes. Currently, when an expired tombstone loses to a live issue (resurrection), there is no logging or debugging output. This makes it hard to understand why an issue reappeared. Recommendation: Add optional debug logging when resurrection occurs, e.g., Issue bd-abc resurrected (tombstone expired). Files: internal/merge/merge.go:359-366, 371-378, 400-405, 410-415


Improve test coverage for internal/rpc (47.5% → 60%)

The RPC package has only 47.5% test coverage. RPC is the communication layer for daemon operations.

Current coverage: 47.5%
Target coverage: 60%


bd find-duplicates - AI-powered duplicate detection

Find semantically duplicate issues.

Approaches:
1. Mechanical: Exact title/description matching
2. Embeddings: Cosine similarity (cheap, scalable)
3. AI: LLM-based semantic comparison (expensive, accurate)

Uses embeddings by default for >100 issues.

Files: cmd/bd/find_duplicates.go (new)


Improve test coverage for internal/daemon (27.3% → 60%)

The daemon package has only 27.3% test coverage. The daemon is critical for background operations and reliability.

Key areas needing tests:
- Daemon autostart logic
- Socket handling
- PID file management
- Health checks

Current coverage: 27.3%
Target coverage: 60%


Improve test coverage for cmd/bd/setup (28.4% → 50%)

The setup package has only 28.4% test coverage. Setup commands are critical for first-time user experience.

Current coverage: 28.4%
Target coverage: 50%


Audit and standardize JSON output across all commands

Ensure consistent JSON format and error handling when --json flag is used.

**Scope:**
1. Verify all commands respect --json flag
2. Standardize success response format
3. Standardize error response format
4. Document JSON schemas

**Commands to audit:**
- Core CRUD: create, update, delete, show, list, search ✓
- Queries: ready, blocked, stale, count, stats, status
- Deps: dep add/remove/tree/cycles
- Labels: label commands
- Comments: comments add/list/delete
- Epics: epic status/close-eligible
- Export/import: already support --json ✓

**Testing:**
- Success cases return valid JSON
- Error cases return valid JSON (not plain text)
- Consistent field naming (snake_case vs camelCase)
- Array vs object wrapping consistency


Test worktree sync branch commit


Document BEADS_DIR pattern for multi-agent workspaces (Gas Town)

Gas Town and similar multi-agent systems need to configure separate beads databases per workspace/rig, distinct from any project-level beads.

## Use Case

In Gas Town:
- Each 'rig' (managed project) has multiple agents (polecats, refinery, witness)
- All agents in a rig should share a single beads database at the rig level
- This should be separate from any .beads/ the project itself uses
- The BEADS_DIR env var enables this

## Documentation Needed

1. Add a section to docs explaining BEADS_DIR for multi-agent setups
2. Example: setting BEADS_DIR in agent startup scripts/hooks
3. Clarify interaction with project-level .beads/ (BEADS_DIR takes precedence)

## Current Support

Already implemented in internal/beads/beads.go:FindDatabasePath():
- BEADS_DIR env var is checked first (preferred)
- BEADS_DB env var still supported (deprecated)
- Falls back to .beads/ search in tree

Just needs documentation for the multi-agent workspace pattern.


Command Set Standardization & Flag Consistency

Comprehensive improvements to bd command set based on 2025 audit findings.

## Background
See docs/command-audit-2025.md for detailed analysis.

## Goals
1. Standardize flag naming and behavior across all commands
2. Add missing flags for feature parity
3. Fix naming confusion
4. Improve consistency in JSON output

## Success Criteria
- All mutating commands support --dry-run (no --preview variants)
- bd update supports label operations
- bd search has filter parity with bd list
- Priority flags accept both int and P0-P4 format everywhere
- JSON output is consistent across all commands


Add --body-file flag to bd create for reading descriptions from files

## Problem

Creating issues with long/complex descriptions via CLI requires shell escaping gymnastics:

```bash
# Current workaround - awkward heredoc quoting
bd create --title="..." --description="$(cat <<'EOF'
...markdown...
EOF
)"

# Often fails with quote escaping errors in eval context
# Agents resort to writing temp files then reading them
```

## Proposed Solution

Add `--body-file` and `--description-file` flags to read description from a file, matching `gh` CLI pattern.

```bash
# Natural pattern that aligns with training data
cat > /tmp/desc.md << 'EOF'
...markdown content...
EOF

bd create --title="..." --body-file=/tmp/desc.md
```

## Implementation

### 1. Add new flags to `bd create`

```go
createCmd.Flags().String("body-file", "", "Read description from file (use - for stdin)")
createCmd.Flags().String("description-file", "", "Alias for --body-file")
```

### 2. Flag precedence

- If `--body-file` or `--description-file` is provided, read from file
- If value is `-`, read from stdin
- Otherwise fall back to `--body` or `--description` flag
- If neither provided, description is empty (current behavior)

### 3. Error handling

- File doesn't exist → clear error message
- File not readable → clear error message
- stdin specified but not available → clear error message

## Benefits

✅ **Matches training data**: `gh issue create --body-file file.txt` is a common pattern
✅ **No shell escaping issues**: File content is read directly
✅ **Works with any content**: Markdown, special characters, quotes, etc.
✅ **Agent-friendly**: Agents already write complex content to temp files
✅ **User-friendly**: Easier for humans too when pasting long descriptions

## Related Commands

Consider adding similar support to:
- `bd update --body-file` (for updating descriptions)
- `bd comment --body-file` (if/when we add comments)

## Examples

```bash
# From file
bd create --title="Add new feature" --body-file=feature.md

# From stdin
echo "Quick description" | bd create --title="Bug fix" --body-file=-

# With other flags
bd create \
  --title="Security issue" \
  --type=bug \
  --priority=0 \
  --body-file=security-report.md \
  --label=security
```

## Testing

- Test with normal files
- Test with stdin (`-`)
- Test with non-existent files (error handling)
- Test with binary files (should handle gracefully)
- Test with empty files (valid - empty description)
- Test that `--description-file` and `--body-file` are equivalent aliases


GH#509: bd fails to find .beads from nested worktrees

findDatabaseInTree stops at worktree git root, missing .beads in parent repo. Should check git-common-dir and search past worktree root. See: https://github.com/steveyegge/beads/issues/509


Update import/export to handle tombstones

Modify importer to read tombstones from issues.jsonl and legacy deletions.jsonl. Modify exporter to write tombstones. Filter tombstoned issues during import. Per design bd-dli.


bd jira sync command

Add a built-in bd command for Jira synchronization.

**Requires**: Both import and export scripts working

**Features**:
- `bd jira sync --pull` - Import from Jira to beads
- `bd jira sync --push` - Export from beads to Jira
- `bd jira sync` - Bidirectional (pull then push, with conflict resolution)
- `bd jira status` - Show sync status and last sync time

**Conflict resolution**:
- Timestamp-based: newer update wins
- Option for --prefer-local or --prefer-jira to override
- Interactive mode for manual conflict resolution (optional)

**Integration**:
- Uses jira.* config settings from bd config
- Stores last sync timestamp in config
- Logs sync activity for audit

**Stretch goals**:
- Webhook integration for real-time sync
- Selective sync by JQL filter


isLikelyHash rejects 3-char all-letter base36 hashes

ExtractIssuePrefix fails for multi-hyphen prefixes when the 3-char hash suffix has no digits.

Example: `xa-adt-bat` returns prefix `xa` instead of `xa-adt`.

Root cause: `isLikelyHash()` requires at least one digit to distinguish hashes from English words, but base36 hashes can be all-letters by chance.

Affected: 20 issues in xa-adapt with suffixes like bat, dev, fbi, oil, etc.


Jira import script (jira2jsonl.py)

Create a Python script to import Jira issues into beads JSONL format.

**Pattern**: Follow examples/github-import/gh2jsonl.py

**Features needed**:
- Fetch issues via Jira REST API with JQL queries
- Pagination handling (100 issues per request)
- Map Jira fields to beads fields (see schema mapping in epic)
- Set external_ref to Jira issue URL for re-sync
- Support both Jira Cloud and Server/Data Center APIs
- Read config from bd config (jira.url, jira.project, jira.api_token)

**Config-driven mapping**:
- jira.status_map.* for status conversion
- jira.type_map.* for issue type conversion
- jira.priority_map.* for priority conversion

**Usage**:
```bash
python jira2jsonl.py --project PROJ | bd import
# or
python jira2jsonl.py --jql 'project=PROJ AND status\!=Done' | bd import
```

**Output**: JSONL with external_ref set to Jira issue URL


Design tombstone TTL and expiration semantics

Design the TTL and expiration behavior for tombstone records. Key decisions: default TTL (recommend 30 days), configuration via config.yaml, expiration semantics (remove vs keep expired), merge behavior when tombstone expires (live issue wins), clock skew handling.


wish: list & ready show issues as hierarchy tree

`bd ready` and `bd list` just show a flat list, and it's up to the reader to parse which ones are dependent or sub-issues of others. It would be much easier to understand if they were shown in a tree format


CRITICAL: bd sync exports before pull, allowing stale DB to corrupt JSONL statuses

## Root Cause

The fix in bd-53c (reverse ZFC check) only checks COUNTS, not content. The real corruption happens when:

1. Polecat A has stale DB with old status values (e.g., status=closed for issues that are now open on remote)
2. Polecat A runs bd sync:
   - **Export FIRST**: DB (status=closed) → JSONL (overwrites correct status=open)
   - Commit: Stale JSONL committed
   - Pull: 3-way merge with remote
   - Merge uses 'closed wins' rule → status stays closed
3. Polecat A pushes → Remote now corrupted with status=closed

## Why bd-53c didn't fix it

The reverse ZFC check compares COUNTS:
```go
if jsonlCount > dbCount  // Only catches count mismatch
```

But in the corruption scenario:
- JSONL count = 5, DB count = 5 (same count!)
- Only the STATUS field differs

## The Real Fix

**PULL BEFORE EXPORT**. The sync order must be:
1. Pull from remote (get latest state)
2. Import merged JSONL to DB
3. THEN export DB changes (if any)

Current order is: Export → Commit → Pull → Import → Push

This is a fundamental architecture change to the sync flow.

## Workaround

Use --no-auto-flush and manually control the sync order, or disable daemon auto-export.

## Evidence

From user investigation:
- At 595b7943 (13:20:30): 5 open issues
- At 10239812 (13:28:39): 0 open issues
- All 5 issues had their status changed from open to closed
- Count stayed at 5 (not a deletion issue)


Performance Validation

Confirm no performance regression from cache removal


Add 'bd status' command for issue database overview

Implement a bd status command that provides a quick snapshot of the issue database state, similar to how git status shows working tree state.

Expected output: Show summary including counts by state (open, in-progress, blocked, closed), recent activity (last 7 days), and quick overview without needing multiple queries.

Example output showing issue counts, recent activity stats, and pointer to bd list for details.

Proposed options: --all (show all issues), --assigned (show issues assigned to current user), --json (JSON format output)

Use cases: Quick project health check, onboarding for new contributors, integration with shell prompts or CI/CD, daily standup reference


Beads commands operate on stale database without warning

All beads read operations should validate database is in sync with JSONL before proceeding.

**Current Behavior:**
- Commands can query/read from stale database
- Only mutation operations (like 'bd sync') check if JSONL is newer
- User gets incorrect results without realizing database is out of sync

**Expected Behavior:**
- All beads commands should have pre-flight check for database freshness
- If JSONL is newer than database, refuse to operate with error: "Database out of sync. Run 'bd import' first."
- Same safety check that exists for 'bd sync' should apply to ALL operations

**Impact:**
- Users make decisions based on incomplete/outdated data
- Silent failures lead to confusion (e.g., thinking issues don't exist when they do)
- Similar to running git commands on stale repo without being warned to pull

**Example:**
- Searched for bd-g9eu issue file: not found
- Issue exists in .beads/issues.jsonl (in git)
- Database was stale, but no warning was given
- Led to incorrect conclusion that issue was already closed/deleted

## Implementation Complete

**Phase 1: Created staleness check (cmd/bd/staleness.go)**
- ensureDatabaseFresh() function checks JSONL mtime vs last_import_time
- Returns error with helpful message when database is stale
- Auto-skips in daemon mode (daemon has auto-import)

**Phase 2: Added to all read commands**
- list, show, ready, status, stale, info, duplicates, validate
- Check runs before database queries in direct mode
- Daemon mode already protected via checkAndAutoImportIfStale()

**Phase 3: Code Review Findings**
See follow-up issues:
- bd-XXXX: Add warning when staleness check errors
- bd-YYYY: Improve CheckStaleness error handling
- bd-ZZZZ: Refactor redundant daemon checks (low priority)

**Testing:**
- Build successful: go build ./cmd/bd
- Binary works: ./bd --version
- Ready for manual testing

**Next Steps:**
1. Test with stale database scenario
2. Implement review improvements
3. Close issue when tests pass


Imperator clone on beads-sync branch causes bd sync failures


Design contributor namespace isolation for beads pollution prevention

## Problem

When contributors work on beads-the-project using beads-the-tool, their personal work-tracking issues leak into PRs. The .beads/issues.jsonl is intentionally tracked (it's the project's issue database), but contributors' local issues pollute the diff.

This is a recursion problem unique to self-hosting projects.

## Possible Solutions to Explore

1. **Contributor namespaces** - Each contributor gets a private prefix (e.g., `bd-steve-xxxx`) that's gitignored or filtered
2. **Separate database** - Contributors use BEADS_DIR pointing elsewhere for personal tracking
3. **Issue ownership/visibility flags** - Mark issues as "local-only" vs "project"
4. **Prefix-based filtering** - Configure which prefixes are committed vs ignored

## Design Considerations

- Should be zero-friction for contributors (no manual setup)
- Must not break existing workflows
- Needs to work with sync/collaboration features
- Consider: what if a "personal" issue graduates to "project" issue?

## Expansion Needed

This is a placeholder. Needs detailed design exploration before implementation.


Implement `bd setup cursor` for Cursor IDE integration

Create a `bd setup cursor` command that integrates Beads workflow into Cursor IDE via .cursorrules file. Unlike Claude Code (which has hooks), Cursor uses a static rules file to provide context to its AI.


Fix unparam unused parameter in cmd/bd/doctor.go:1879

Linting issue: checkGitHooks - path is unused (unparam) at cmd/bd/doctor.go:1879:20. Error: func checkGitHooks(path string) doctorCheck {


Add Result.ConvertedToTombstone counter for import statistics

The import Result struct has SkippedDeleted but doesn't distinguish between:
1. Issues skipped because they're in deletions manifest (old behavior)
2. Issues converted from deletions.jsonl to tombstones (new bd-dve behavior)

Add a new ConvertedToTombstone counter to track legacy deletions converted to tombstones during import. This provides better visibility into the migration process.


Update git hooks to be sync.branch aware

## Problem

The pre-push hook blocks pushes when .beads/issues.jsonl has uncommitted changes. But with sync.branch configured, those changes are intentionally NOT committed to main - they go to the sync branch via worktree.

## Current Behavior

1. User configures sync.branch=beads-sync
2. bd sync commits changes to beads-sync via worktree
3. Local .beads/issues.jsonl is updated (needed for import)
4. git push to main triggers pre-push hook
5. Hook sees uncommitted .beads changes and blocks push
6. User must use --no-verify to push

## Expected Behavior

When sync.branch is configured, the pre-push hook should:
1. Check if sync.branch is set (bd config get sync.branch)
2. If set, skip the .beads uncommitted check OR
3. Verify changes are committed to the sync branch instead

## Affected Files

- examples/git-hooks/pre-push
- examples/git-hooks/pre-commit (may also need update)

## Workaround

Use git push --no-verify


convertDeletionToTombstone uses hardcoded default values

The convertDeletionToTombstone helper (importer.go:1114-1130) uses hardcoded defaults:
- Priority: 2
- IssueType: types.TypeTask
- Title: "(deleted)"

These defaults work but could be improved:
1. Consider using Priority: 0 (unset) to distinguish from user-set priority
2. OriginalType is empty string - consider setting IssueType to empty to be consistent
3. Title could include the original ID for debugging: "(deleted: bd-xyz)"

Low priority cleanup for consistency.


Upgrade notification persists after running suggested commands

The upgrade notification kept showing even after running 'bd upgrade review' and 'bd doctor' as suggested.

Expected: Notification should be dismissed after running either/both commands
Actual: Notification persisted on every bd command

Investigation findings:
- metadata.json correctly shows last_bd_version=0.28.0
- The notification stopped appearing after a few more invocations
- May be related to daemon caching or a race condition
- The 'upgradeAcknowledged' flag in version_tracking.go:115 only persists per-session (in-memory)

Possible causes:
1. Daemon vs direct mode inconsistency - daemon may have stale version info
2. The version is checked/updated before daemon connection, but daemon has cached state
3. Race between trackBdVersion() and daemon startup

Status: May have resolved itself, but root cause unclear. Close if no longer reproducible.


Add warning when staleness check errors

## Problem

When ensureDatabaseFresh() calls CheckStaleness() and it errors (corrupted metadata, permission issues, etc.), we silently proceed with potentially stale data.

**Location:** cmd/bd/staleness.go:27-32

**Scenarios:**
- Corrupted metadata table
- Database locked by another process
- Permission issues reading JSONL file
- Invalid last_import_time format in DB

## Current Code

```go
isStale, err := autoimport.CheckStaleness(ctx, store, dbPath)
if err \!= nil {
    // If we can't determine staleness, allow operation to proceed
    // (better to show potentially stale data than block user)
    return nil
}
```

## Fix

```go
isStale, err := autoimport.CheckStaleness(ctx, store, dbPath)
if err \!= nil {
    fmt.Fprintf(os.Stderr, "Warning: Could not verify database freshness: %v\n", err)
    fmt.Fprintf(os.Stderr, "Proceeding anyway. Data may be stale.\n\n")
    return nil
}
```

## Impact
Medium - users should know when staleness check fails

## Effort
Easy - 5 minutes


Priority 0 in merge may incorrectly win over set priorities

In mergePriority(), priority 0 (which may mean 'unset' due to Go's zero value) beats any explicitly set priority like P1, P2, etc. Should probably treat 0 as 'no priority set' and not let it win conflicts.


Merge timestamp tie-breaker should prefer local (left)

In mergeFieldByUpdatedAt, when timestamps are exactly equal, right wins. For consistency with IssueType (where local/left wins), equal timestamps should prefer left. Minor inconsistency.


Git merge driver uses invalid placeholders (%L, %R instead of %A, %B)

## Problem

The beads git merge driver is configured with invalid Git placeholders:

```
git config merge.beads.driver "bd merge %A %O %L %R"
```

Git doesn't recognize `%L` or `%R` as valid merge driver placeholders. The valid placeholders are:
- `%O` = base (common ancestor)
- `%A` = current version (ours)
- `%B` = other version (theirs)

## Impact

- Affects ALL users when they have `.beads/beads.jsonl` merge conflicts
- Automatic JSONL merge fails with error: "error reading left file: failed to open file: open 7: no such file or directory"
- Users must manually resolve conflicts instead of getting automatic merge

## Root Cause

The `bd init` command (or wherever the merge driver is configured) is using non-standard placeholders. When Git encounters `%L` and `%R`, it either passes them literally or interprets them incorrectly.

## Fix

Update the merge driver configuration to:
```
git config merge.beads.driver "bd merge %A %O %A %B"
```

Where:
- 1st `%A` = output file (current file, will be overwritten)
- `%O` = base (common ancestor)
- 2nd `%A` = left/current version
- `%B` = right/other version

## Action Items

1. Fix `bd init` (or equivalent setup command) to use correct placeholders
2. Add migration/warning for existing users with misconfigured merge driver
3. Update documentation with correct merge driver setup
4. Consider adding validation when `bd init` is run


bd preflight: PR readiness checks for contributors

## Vision

Encode project-specific institutional knowledge into executable checks. CONTRIBUTING.md is documentation that's read once and forgotten; `bd preflight` is documentation that runs at exactly the right moment.

## Problem Statement

Contributors face a "last mile" problem - they do the work but stumble on project-specific gotchas at PR time:
- Nix vendorHash gets stale when go.sum changes
- Beads artifacts leak into PRs (see bd-umbf for namespace solution)
- Version mismatches between version.go and default.nix
- Tests/lint not run locally before pushing
- Other project-specific checks that only surface when CI fails

These are too obscure to remember, exist in docs nobody reads end-to-end, and waste CI round-trips.

## Why beads?

Beads already has a foothold in the contributor workflow. It knows:
- Git state (staged files, branch, dirty status)
- Project structure
- The specific issue being worked on
- Project-specific configuration

## Proposed Interface

### Tier 1: Checklist Mode (v1)

    $ bd preflight
    PR Readiness Checklist:

    [ ] Tests pass: go test -short ./...
    [ ] Lint passes: golangci-lint run ./...
    [ ] No beads pollution: check .beads/issues.jsonl diff
    [ ] Nix hash current: go.sum unchanged or vendorHash updated
    [ ] Version sync: version.go matches default.nix

    Run 'bd preflight --check' to validate automatically.

### Tier 2: Check Mode (v2)

    $ bd preflight --check
    ✓ Tests pass
    ✓ Lint passes
    ⚠ Beads pollution: 3 issues in diff - are these project issues or personal?
    ✗ Nix hash stale: go.sum changed, vendorHash needs update
      Fix: sha256-KRR6dXzsSw8OmEHGBEVDBOoIgfoZ2p0541T9ayjGHlI=
    ✓ Version sync

    1 error, 1 warning. Run 'bd preflight --fix' to auto-fix where possible.

### Tier 3: Fix Mode (v3)

    $ bd preflight --fix
    ✓ Updated vendorHash in default.nix
    ⚠ Cannot auto-fix beads pollution - manual review needed

## Checks to Implement

| Check | Description | Auto-fixable |
|-------|-------------|--------------|
| tests | Run go test -short ./... | No |
| lint | Run golangci-lint | Partial (gofmt) |
| beads-pollution | Detect personal issues in diff | No (see bd-umbf) |
| nix-hash | Detect stale vendorHash | Yes (if nix available) |
| version-sync | version.go matches default.nix | Yes |
| no-debug | No TODO/FIXME/console.log | Warn only |
| clean-stage | No unintended files staged | Warn only |

## Future: Configuration

Make checks configurable per-project via .beads/preflight.yaml:

    preflight:
      checks:
        - name: tests
          run: go test -short ./...
          required: true
        - name: no-secrets
          pattern: "**/*.env"
          staged: deny
        - name: custom-check
          run: ./scripts/validate.sh

This lets any project using beads define their own preflight checks.

## Implementation Phases

### Phase 1: Static Checklist
- Implement bd preflight with hardcoded checklist for beads
- No execution, just prints what to check
- Update CONTRIBUTING.md to reference it

### Phase 2: Automated Checks
- Implement bd preflight --check
- Run tests, lint, detect stale hashes
- Clear pass/fail/warn output

### Phase 3: Auto-fix
- Implement bd preflight --fix
- Fix vendorHash, version sync
- Integrate with bd-umbf solution for pollution

### Phase 4: Configuration
- .beads/preflight.yaml support
- Make it useful for other projects using beads
- Plugin/hook system for custom checks

## Dependencies

- bd-umbf: Namespace isolation for beads pollution (blocking for full solution)

## Success Metrics

- Fewer CI failures on first PR push
- Reduced "fix nix hash" commits
- Contributors report preflight caught issues before CI


Refactor: extract common helpers in sync-branch hook checks

Code review of #532 fix identified duplication between checkSyncBranchHookCompatibility and checkSyncBranchHookQuick.

Suggested refactoring:
1. Extract getPrePushHookPath(path string) helper for git dir + hook path resolution
2. Extract extractHookVersion(hookContent string) helper for version parsing
3. Consider whether Warning for custom hooks is appropriate (vs OK with info message)
4. Document the intentional behavior difference between full check (Warning for custom) and quick check (OK for custom)


Missing test for PullResult.SafetyWarnings population


bd doctor: add configuration value validation

Currently bd doctor checks for missing config files but doesn't validate config values. Add validation for: invalid priority values, malformed sync intervals, invalid branch names, unsupported storage backends, etc. This would catch misconfigurations before they cause runtime errors.


Add bd reset command for clean slate restart

Implement a command to reset beads to a clean starting state.

**Context:** GitHub issue #479 - users sometimes get beads into an invalid state after updates, and there's no clean way to start fresh. The git backup/restore mechanism that protects against accidental deletion also makes it hard to intentionally reset.

**Current workaround** (from maphew):
```bash
bd daemons killall
git rm .beads/*.jsonl
git commit -m 'remove old issues'
rm .beads/*
bd init
bd onboard
```

**Desired:** A proper `bd reset` command that handles this cleanly and safely.


Improve test coverage for internal/syncbranch (33.0% → 70%)

The syncbranch package has only 33.0% test coverage. This package handles git sync operations and is critical for data integrity.

Current coverage: 33.0%
Target coverage: 70%


bd blocked shows empty (GH#545)

bd blocked only shows dependency-blocked issues, not status=blocked issues.

Either:
- Include status=blocked issues, OR
- Document/rename to clarify behavior

Fix in: cmd/bd/blocked.go


bd sync: use worktree for sync.branch commits (non-daemon mode)

## Summary

When `sync.branch` is configured (e.g., `beads-sync`), `bd sync` should commit beads changes to that branch via git worktree, even when the user's working directory is on a different branch (e.g., `main`).

Currently:
- `bd sync` always commits to the current branch
- Daemon with `--auto-commit` uses worktrees to commit to sync branch
- Gap: `bd sync` ignores sync.branch config

## Goal

Workers stay on `main` (or feature branches) while beads metadata automatically flows to `beads-sync` branch. No daemon required.

## Design Considerations

1. **Worktree lifecycle**: Create on first use, reuse thereafter
2. **Daemon interaction**: Ensure daemon and bd sync don't conflict
3. **MCP server**: Uses daemon or direct mode - needs same behavior
4. **Pull semantics**: Pull from sync branch, not current branch
5. **Push semantics**: Push to sync branch remote
6. **Error handling**: Worktree corruption, missing branch, etc.

## Affected Components

- `cmd/bd/sync.go` - Main changes
- `cmd/bd/daemon_sync_branch.go` - Reuse existing functions
- `internal/git/worktree.go` - Already implemented
- MCP server (if it bypasses daemon)

## Edge Cases

- Fresh clone (no sync branch exists yet)
- Worktree exists but is corrupted
- Concurrent bd sync from multiple processes
- sync.branch configured but remote doesn't have that branch
- User switches sync.branch config mid-session


GH#497: bd onboard copilot-instructions.md is beads-specific, not generic

bd onboard outputs beads repo specific content (Go/SQLite/Cobra) for copilot-instructions.md instead of a generic template. AGENTS.md output is correct. See: https://github.com/steveyegge/beads/issues/497


Add tests for helper functions (GetDirtyIssueHash, GetAllDependencyRecords, export hashes)

Several utility functions have 0% coverage:
- GetDirtyIssueHash (dirty.go)
- GetAllDependencyRecords (dependencies.go)
- GetExportHash, SetExportHash, ClearAllExportHashes (hash.go)

These are lower priority but should have basic coverage.


Fix G104 errors unhandled in internal/storage/sqlite/queries.go:1186

Linting issue: G104: Errors unhandled (gosec) at internal/storage/sqlite/queries.go:1186:2. Error: rows.Close()


Implement tombstone types and schema migration

Add tombstone fields to Issue struct (deleted_at, deleted_by, delete_reason, original_type), add StatusTombstone constant, create SQLite migration for new columns. Per design bd-2m7.


Duplicate safety check message when confirmation required


Implement CLI command (cmd/bd/reset.go)

Wire up the reset command with Cobra CLI.

## Responsibilities
- Define command and all flags
- User confirmation prompt (unless --force)
- Display impact summary before confirmation
- Colored output and progress indicators
- Call core reset package
- Handle errors with user-friendly messages
- Register command with rootCmd in init()

## Flags
```go
--hard       bool   "Also remove from git and commit"
--force      bool   "Skip confirmation prompt"
--backup     bool   "Create backup before reset"
--dry-run    bool   "Preview what would happen"
--skip-init  bool   "Do not re-initialize after reset"
--verbose    bool   "Show detailed progress output"
```

## Output Format
```
⚠  This will reset beads to a clean state.

Will be deleted:
  • 47 issues (23 open, 24 closed)
  • 12 tombstones

Continue? [y/N] y

→ Stopping daemons... ✓
→ Removing .beads/... ✓
→ Initializing fresh... ✓

✓ Reset complete. Run 'bd onboard' to set up hooks.
```

## Implementation Notes
- Confirmation logic lives HERE, not in core package
- Use color package (github.com/fatih/color) for output
- Follow patterns from other commands (init.go, doctor.go)
- Add to rootCmd in init() function

## File Location
`cmd/bd/reset.go`


sync branch not match config

./bd sync
→ Exporting pending changes to JSONL...
→ No changes to commit
→ Pulling from sync branch 'gh-386'...
Error pulling from sync branch: failed to create worktree: failed to create worktree parent directory: mkdir /var/home/matt/dev/beads/worktree-db-fail/.git: not a directory
matt@blufin-framation ~/d/b/worktree-db-fail (worktree-db-fail) [1]> bd config list

Configuration:
  auto_compact_enabled = false
  compact_batch_size = 50
  compact_model = claude-3-5-haiku-20241022
  compact_parallel_workers = 5
  compact_tier1_days = 30
  compact_tier1_dep_levels = 2
  compact_tier2_commits = 100
  compact_tier2_days = 90
  compact_tier2_dep_levels = 5
  compaction_enabled = false
  issue_prefix = worktree-db-fail
  sync.branch = worktree-db-fail


Consider using types.Status in merge package for type safety

The merge package uses string for status comparison (e.g., result.Status == closed, issue.Status == StatusTombstone). The types package defines Status as a type alias with validation. While the merge package needs its own Issue struct for JSONL flexibility, it could import and use types.Status for constants to get compile-time type checking. Current code: if left == closed || right == closed. Could be: if left == string(types.StatusClosed). This is low priority since string comparison works correctly. Files: internal/merge/merge.go:44, 488, 501-521


Update 3-way merge to handle tombstones

Modify internal/merge/merge.go to detect tombstones, implement tombstone-wins-unless-expired logic, add TTL parameter to merge functions. Per design bd-zvg.


Implement content-first idempotent import

## Overview
Phase 4: Refactor import to be content-first and idempotent, ensuring importing same JSONL multiple times always converges correctly.

## Current Problem
Current import is ID-first:
1. Look up by ID
2. If exists, update
3. If not exists, create

This causes issues when:
- Same content arrives with different IDs (renames not detected)
- Multiple rounds of import needed for convergence
- Import order affects final state

## Solution
Make import content-first and idempotent:
1. Hash all incoming and existing issues
2. Match by content hash first (detect renames)
3. Handle ID conflicts second (using global resolution)
4. Ensure importing same data multiple times = no-op

## Implementation Tasks

### 1. Refactor ImportIssues to be content-first
File: internal/importer/importer.go

```go
func ImportIssues(ctx context.Context, dbPath string, store storage.Storage,
    issues []*types.Issue, opts Options) (*Result, error) {

    result := &Result{...}

    sqliteStore, needCloseStore, err := getOrCreateStore(ctx, dbPath, store)
    if err != nil {
        return nil, err
    }
    if needCloseStore {
        defer func() { _ = sqliteStore.Close() }()
    }

    // Phase 1: Compute content hashes for all incoming issues
    for _, issue := range issues {
        issue.ContentHash = issue.ComputeContentHash()
    }

    // Phase 2: Build content hash maps
    incomingByHash := buildHashMap(issues)
    dbIssues, _ := sqliteStore.SearchIssues(ctx, "", types.IssueFilter{})
    dbByHash := buildHashMap(dbIssues)
    dbByID := buildIDMap(dbIssues)

    // Phase 3: Content-first matching
    var newIssues []*types.Issue
    var idConflicts []*CollisionDetail

    for hash, incoming := range incomingByHash {
        if existing, found := dbByHash[hash]; found {
            // Same content exists
            if existing.ID == incoming.ID {
                // Exact match - idempotent case
                result.Unchanged++
            } else {
                // Same content, different ID - rename detected
                // Delete old ID, keep new ID (incoming is canonical)
                if err := handleRename(ctx, sqliteStore, existing, incoming); err != nil {
                    return nil, err
                }
                result.Updated++
            }
        } else {
            // New content - check for ID collision
            if existingWithID, found := dbByID[incoming.ID]; found {
                // ID exists but different content - collision
                idConflicts = append(idConflicts, &CollisionDetail{
                    ID:            incoming.ID,
                    IncomingIssue: incoming,
                    ExistingIssue: existingWithID,
                })
            } else {
                // Truly new issue
                newIssues = append(newIssues, incoming)
            }
        }
    }

    // Phase 4: Resolve ID conflicts using global algorithm
    if len(idConflicts) > 0 {
        if !opts.ResolveCollisions {
            return nil, fmt.Errorf("collision detected")
        }

        idMapping, err := sqlite.ResolveNWayCollisions(ctx, sqliteStore,
            idConflicts, issues)
        if err != nil {
            return nil, err
        }

        if err := applyIDMapping(ctx, sqliteStore, idMapping); err != nil {
            return nil, err
        }

        result.IDMapping = idMapping
        result.Collisions = len(idConflicts)
    }

    // Phase 5: Create new issues
    if len(newIssues) > 0 {
        if err := sqliteStore.CreateIssues(ctx, newIssues, "import"); err != nil {
            return nil, err
        }
        result.Created = len(newIssues)
    }

    // Phase 6: Import dependencies, labels, comments (existing logic)
    // ...

    return result, nil
}
```

### 2. Implement helper functions

```go
// buildHashMap creates a map of content hash → issue
func buildHashMap(issues []*types.Issue) map[string]*types.Issue {
    result := make(map[string]*types.Issue)
    for _, issue := range issues {
        result[issue.ContentHash] = issue
    }
    return result
}

// buildIDMap creates a map of ID → issue
func buildIDMap(issues []*types.Issue) map[string]*types.Issue {
    result := make(map[string]*types.Issue)
    for _, issue := range issues {
        result[issue.ID] = issue
    }
    return result
}

// handleRename handles content match with different IDs
func handleRename(ctx context.Context, s *SQLiteStorage,
    existing *types.Issue, incoming *types.Issue) error {

    // Delete old ID
    if err := s.DeleteIssue(ctx, existing.ID); err != nil {
        return fmt.Errorf("failed to delete old ID %s: %w", existing.ID, err)
    }

    // Create with new ID
    if err := s.CreateIssue(ctx, incoming, "import-rename"); err != nil {
        return fmt.Errorf("failed to create renamed issue %s: %w",
            incoming.ID, err)
    }

    // Update references from old ID to new ID
    idMapping := map[string]string{existing.ID: incoming.ID}
    return updateReferences(ctx, s, idMapping)
}
```

### 3. Add idempotency tests

Test cases:
1. Import same JSONL twice → second import reports all Unchanged
2. Import, modify DB, import again → reports Updated
3. Import with rename, import again → idempotent
4. Import with collision resolution, import again → idempotent

### 4. Update handleCollisions to use new flow
Current handleCollisions in importer.go needs to be updated to:
- Use content-first matching
- Call new ResolveNWayCollisions
- Apply results using ApplyCollisionResolution

## Acceptance Criteria
- Import matches by content hash before checking IDs
- Importing same JSONL multiple times is idempotent (reports Unchanged)
- Rename detection works (same content, different ID)
- ID conflicts resolved using global algorithm
- Result.Unchanged correctly tracks idempotent imports
- TestThreeCloneCollision passes
- All existing import tests still pass

## Testing Strategy

### Unit Tests
- buildHashMap correctly indexes by content hash
- buildIDMap correctly indexes by ID
- handleRename deletes old, creates new, updates references

### Integration Tests
- Import same data twice → idempotent
- Import renamed issue → handled correctly
- Import with collision → resolved globally
- Final pull after 3-way collision → all clones converge

### Property Tests
- Idempotency: Import(x); Import(x) ≡ Import(x)
- Commutativity: Import(a); Import(b) ≡ Import(b); Import(a) (for non-colliding issues)
- Convergence: After N rounds of sync, all clones identical

## Files to Modify
- internal/importer/importer.go (major refactor of ImportIssues)
- internal/importer/importer_test.go (new tests)
- cmd/bd/import_bug_test.go (update for new behavior)

## Dependencies
- Requires bd-cbed9619.5 (ContentHash field)
- Requires bd-cbed9619.4 (read-only detection)
- Requires bd-cbed9619.3 (global resolution)

## Risk Mitigation
Major refactor of import logic. Recommend:
1. Comprehensive tests before modifying
2. Feature flag to enable/disable
3. Keep old import code path for rollback
4. Test with all existing import tests
5. Manual testing with real repositories

## Success Metrics
After this phase:
- TestThreeCloneCollision should PASS
- All clones converge after final pull
- Import is demonstrably idempotent
- No data loss in N-way scenarios


Auto-recovery mode (bd sync --auto-recover)

Add bd sync --auto-recover flag that: detects problematic sync state, backs up .beads/issues.db with timestamp, rebuilds DB from JSONL atomically, verifies consistency, reports what was fixed. Provides safety valve when sync integrity fails.


Time-dependent tests may be flaky near TTL boundary

Several tombstone merge tests use time.Now() to create test data: time.Now().Add(-24 * time.Hour), time.Now().Add(-60 * 24 * time.Hour), etc. While these work reliably in practice (24h vs 30d TTL has large margin), they could theoretically be flaky if: 1) Tests run slowly, 2) System clock changes during test, 3) TTL constants change. Recommendation: Consider using a fixed reference time or time injection for deterministic tests. Lower priority since current margin is large. Files: internal/merge/merge_test.go:1337-1338, 1352-1353, 1548-1549, 1590-1591


Implement a `bd reset` command to reset beads to a clean starting state.

## Context
GitHub issue #479 - users sometimes get beads into an invalid state after updates, and there's no clean way to start fresh. The git backup/restore mechanism that protects against accidental deletion also makes it hard to intentionally reset.

## Design

### Command Interface
```
bd reset [--hard] [--force] [--backup] [--dry-run] [--no-init]
```

| Flag | Effect |
|------|--------|
| `--hard` | Also remove from git index and commit |
| `--force` | Skip confirmation prompt |
| `--backup` | Create `.beads-backup-{timestamp}/` first |
| `--dry-run` | Preview what would happen |
| `--no-init` | Don't re-initialize after clearing |

### Reset Levels
1. **Soft Reset (default)** - Kill daemons, clear .beads/, re-init. Git history unchanged.
2. **Hard Reset (`--hard`)** - Also git rm and commit the removal, then commit fresh state.

### Implementation Flow
1. Validate .beads/ exists
2. If not --force: show impact summary, prompt confirmation
3. If --backup: copy .beads/ to .beads-backup-{timestamp}/
4. Kill daemons
5. If --hard: git rm + commit
6. rm -rf .beads/*
7. If not --no-init: bd init (and git add+commit if --hard)
8. Print summary

### Safety Mechanisms
- Confirmation prompt (skip with --force)
- Impact summary (issue/tombstone counts)
- Backup option
- Dry-run preview
- Git dirty check warning

### Code Structure
- `cmd/bd/reset.go` - CLI command
- `internal/reset/` - Core logic package


Merge3Way public API does not expose TTL parameter

The public Merge3Way() function in merge.go does not allow callers to configure the tombstone TTL. It hard-codes the default via merge3WayWithTTL(). While merge3WayWithTTL() exists, it is unexported (lowercase). This means the CLI and tests cannot configure TTL at merge time. Use cases: testing with different TTL values, per-repository TTL configuration, debugging with short TTL, supporting --ttl flag in bd merge command (mentioned in design doc bd-zvg). Recommendation: Export Merge3WayWithTTL (rename to uppercase). Files: internal/merge/merge.go:77, 292-298


GH#486: Claude forgets beads workflow mid-session

Claude progressively reverts to TodoWrite or skips tracking despite CLAUDE.md instructions. Happens after context resets or long sessions. Need stronger prompting or hooks. See: https://github.com/steveyegge/beads/issues/486


Update GetStatistics to report tombstone count separately

Per bd-2m7 design: 'Should tombstones appear in bd stats? Recommendation: Yes, as separate counter: 5 deleted (tombstones)'

Currently GetStatistics counts tombstones in TotalIssues without distinguishing them.

Location: internal/storage/sqlite/events.go:114-121

Add to Statistics struct and query:
- DeletedIssues (tombstone count)
- Exclude tombstones from TotalIssues or document that it includes them


Update bd compact to prune expired tombstones

Modify compaction to identify and remove expired tombstones from issues.jsonl. Report count of removed tombstones. Per design bd-1r5.


GH#505: Add bd reset command to wipe database

Users struggle to fully reset beads (local + remote). Need bd reset command with safety confirmation. Currently requires manual hook/dir removal. See: https://github.com/steveyegge/beads/issues/505


Add integration tests for bd reset command

End-to-end integration tests for the reset command.

## Test Scenarios

### Basic reset
1. Init beads, create some issues
2. Run bd reset --force
3. Verify .beads/ is fresh, issues gone

### Hard reset
1. Init beads, create issues, commit
2. Run bd reset --hard --force
3. Verify git history has reset commits

### Backup functionality
1. Init beads, create issues
2. Run bd reset --backup --force
3. Verify backup exists with correct contents
4. Verify main .beads/ is reset

### Dry run
1. Init beads, create issues
2. Run bd reset --dry-run
3. Verify nothing changed

### Confirmation prompt
1. Init beads
2. Run bd reset (no --force)
3. Verify prompts for confirmation
4. Test both y and n responses

## Location
tests/integration/reset_test.go or similar


Update LINTING.md with current baseline

After cleanup, document the remaining acceptable baseline in LINTING.md so we can track regression.


CONFIG.md docs for sync.require_confirmation_on_mass_delete missing threshold detail

The docs say 'if >50% of issues vanish' but the actual code (worktree.go:380) also requires '>5 issues existed before'. The docs should mention both conditions for completeness.


bd init --contributor should configure sync.remote=upstream for fork workflows

When running `bd init --contributor` in a fork workflow (where `upstream` remote points to the original repo), the wizard should configure beads to sync from `upstream/main` rather than `origin/main`.

**Current behavior:**
- Contributor mode detects the fork setup (upstream remote exists)
- Sets up planning repo and auto-routing
- Does NOT configure sync remote
- `bd sync` on feature branches shows "No upstream configured, using --from-main mode" and syncs from `origin/main`

**Expected behavior:**
- Contributor mode should also set `sync.remote = upstream` (or similar config)
- `bd sync` should pull beads from `upstream/main` (source of truth)

**Why this matters:**
- The fork's `origin/main` may be behind `upstream/main`
- Contributors want the latest issues from the source repo
- Code PRs go: local -> origin -> upstream, but beads should come FROM upstream

**Suggested fix:**
Add to `runContributorWizard()` after detecting fork:
```go
if isFork {
    store.SetConfig(ctx, "sync.remote", "upstream")
}
```


Add tombstone validation: require deleted_at for tombstone status

ValidateWithCustomStatuses() doesn't enforce that tombstones must have deleted_at set. Per bd-2m7 design: 'If status == tombstone, then deleted_at MUST be set'. Also should validate that non-tombstones cannot have deleted_at set.

Location: internal/types/types.go:109-114

Add validation:
- if i.Status == StatusTombstone && i.DeletedAt == nil: error
- if i.Status != StatusTombstone && i.DeletedAt != nil: error


bd doctor: per-fix confirmation mode

Add an interactive mode where users can approve/reject each fix individually rather than all-or-nothing. Currently --fix prompts once for all fixes. This would give users more control over which repairs to apply, especially useful when some fixes may have side effects.


Add export test verifying tombstones are included in JSONL output

The export now includes tombstones (bd-dve) but there's no test that:
1. Creates issues in DB including a tombstone
2. Runs export
3. Verifies the JSONL contains the tombstone with all fields

Add a test: TestExportIncludesTombstones


Update AGENTS.md with event-driven mode

Document BEADS_DAEMON_MODE env var. Explain opt-in during Phase 1. Add troubleshooting for watcher failures.


Add tombstone doctor checks

Add bd doctor checks for: unmigrated deletions.jsonl, stale deletions.jsonl in Phase 3, tombstones expiring soon. Per design bd-dli.


Fragile no-db detection uses strings.Contains instead of YAML parsing

Two locations use `strings.Contains(string(configData), "no-db: true")` to detect JSONL-only mode:

1. **cmd/bd/main.go:310** - Auto-enabling no-db mode
2. **cmd/bd/doctor.go:863** - Database status check

This is fragile because it could match:
- Comments: `# no-db: true for testing`
- Nested keys: `settings:\n  no-db: true`
- String values: `note: "set no-db: true to disable"`

Should use proper YAML parsing like we did for sync-branch in bd-0rh:

```go
type noDbConfig struct {
    NoDb bool `yaml:"no-db"`
}

var cfg noDbConfig
if err := yaml.Unmarshal(configData, &cfg); err == nil {
    isNoDbMode = cfg.NoDb
}
```

Related: bd-0rh (fixed similar issue for sync-branch)


Implement tombstone TTL and expiration logic

Add IsExpired() method to tombstones, implement TTL config reading from config.yaml, add clock skew grace period. Per design bd-1r5.


Add test files for internal/storage

The internal/storage package has no test files at all. This package provides the storage interface abstraction.

Current coverage: N/A (no test files)
Target: Add basic interface tests