* feat: add watch mode to gt status
- Add --watch/-w flag for continuous status refresh
- Add --interval/-n flag to set refresh interval (default 2s)
- Clears screen and shows timestamp on each refresh
- Graceful Ctrl+C handling to stop watch mode
- Works with existing --fast and --json flags
* fix(status): validate watch interval to prevent panic on zero/negative values
* fix(status): harden watch mode with signal cleanup, TTY detection, and tests
- Add defer signal.Stop() to prevent signal handler leak
- Reject --json + --watch combination (produces invalid output)
- Add TTY detection for ANSI escapes (safe when piped)
- Use style.Dim for header when in TTY mode
- Fix duplicate '(default 2)' in flag help
- Add tests for interval validation and flag conflicts
Resolved conflict in internal/witness/manager.go:
- Kept session import (used by PR code)
- Kept PR's more accurate comment for PID check
- Removed duplicate sessionName method introduced by merge
The previous commit (a3bccc8) violated ZFC by implementing molecule step logic
in Go handlers. Per PRIMING.md: Agent decides. Go transports.
This commit:
1. Reverts the gt witness process command (Go code should not make decisions)
2. Updates mol-witness-patrol formula with explicit CLI commands
3. Fixes --wisp to --ephemeral (bd create flag correction)
4. Removes --wisp from bd list calls (invalid flag)
The Witness Claude agent now has explicit instructions:
- Parse POLECAT_DONE message for polecat name
- Check cleanup_status via bd show
- Run gt polecat nuke or bd create --ephemeral based on status
- Archive mail after handling
ZFC: Agent decides. Go transports.
Fixed two issues in `gt crew stop <name>`:
1. --dry-run flag now works for individual crew stops (previously only
worked with --all)
2. HasSession errors are now properly handled instead of being ignored,
which could cause "No session found" messages even when sessions exist
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The Witness handlers (HandlePolecatDone, HandleMerged, etc.) existed in Go
code but were never called - there was no CLI command to invoke them.
This caused polecats to remain in 'done' state after MR merge because
POLECAT_DONE messages were never processed.
Changes:
- Add `gt witness process <rig>` command to process Witness mail
- Fix --wisp flag to --ephemeral in cleanup wisp creation
- Command processes POLECAT_DONE, MERGED, HELP, SWARM_START messages
- Auto-nukes clean polecats, creates cleanup wisps for dirty ones
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add `gt deacon stale-hooks` command to find and unhook stale beads.
Problem: Beads can get stuck in 'hooked' status when agents die or
abandon work without properly unhooking.
Solution:
- New command scans for hooked beads older than threshold (default 1h)
- Checks if assignee agent is still alive (tmux session exists)
- Unhooks beads with dead agents (sets status back to 'open')
- Supports --dry-run to preview without making changes
Also adds "stale-hook-check" step to Deacon patrol formula.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt sling failed when hooking rig-level beads from town root because
bd update doesn't support cross-database routing like bd show does.
The fix adds a ResolveHookDir helper that:
1. Extracts the prefix from bead ID (e.g., "ap-xxx" → "ap-")
2. Looks up the rig path from routes.jsonl
3. Falls back to townRoot if prefix not found
Also removes the BEADS_DIR environment override which was preventing
routing from working correctly.
Fixes#148
buildRestartCommand() now propagates Claude-related env vars when
respawning sessions via tmux. Fresh shells don't inherit parent env,
so CLAUDE_CODE_USE_BEDROCK, ANTHROPIC_API_KEY, AWS_*, etc. were lost.
This caused any tmux respawn to result in a non-functional claude.
Adds claudeEnvVars list and includes them in the export command when
building the restart command.
* fix: create mayor/daemon.json during gt start and gt doctor --fix (#5)
- Add DaemonPatrolConfig type with heartbeat and patrol settings
- Add Load/Save/Ensure functions for daemon patrol config
- Create daemon.json in gt start (non-fatal if fails)
- Make PatrolHooksWiredCheck fixable with Fix() method
- Add comprehensive tests for both config and doctor checks
This fixes the issue where gt doctor expects mayor/daemon.json to exist
but it was never created by gt start or any other command.
* refactor: use constants.DirMayor instead of hardcoded string
* feat: Beads redirect architecture for tracked and local beads
This change implements proper redirect handling so that all rig agents
(Witness, Refinery, Crew, Polecats) can work with both:
- Tracked beads: .beads/ checked into git at mayor/rig/.beads
- Local beads: .beads/ created at rig root during gt rig add
Key changes:
1. SetupRedirect now handles tracked beads by skipping redirect chains.
The bd CLI doesn't support chains (A→B→C), so worktrees redirect
directly to the final destination (mayor/rig/.beads for tracked).
2. ResolveBeadsDir is now used consistently in polecat and refinery
managers instead of hardcoded mayor/rig paths.
3. Rig-level agents (witness, refinery) now use rig beads with rig
prefix instead of town beads. This follows the architecture where
town beads are only for Mayor/Deacon.
4. prime.go simplified to always use ../../.beads for crew redirects,
letting rig-level redirect handle tracked vs local routing.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat(doctor): Add beads-redirect check for tracked beads
When a repo has .beads/ tracked in git (at mayor/rig/.beads), the rig root
needs a redirect file pointing to that location. This check:
- Detects missing rig-level redirect for tracked beads
- Verifies redirect points to correct location (mayor/rig/.beads)
- Auto-fixes with 'gt doctor --fix'
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: Handle fileLock.Unlock error in daemon
Wrap fileLock.Unlock() return value to satisfy errcheck linter.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
When `gt sling` targets an existing polecat session, it now waits for
Claude to be ready before sending the nudge message. This fixes issue #115
where the "Work slung" message would arrive before Claude had fully started.
Changes:
- Add getSessionFromPane() to extract session name from pane target
- Add ensureClaudeReady() to wait for Claude startup using the same
pragmatic approach as session.Start() (poll for node, accept bypass
dialog, then 8-second delay)
- Call ensureClaudeReady() before injectStartPrompt() in runSling()
The fix uses IsClaudeRunning() for a fast path when Claude is already
running, avoiding unnecessary delays for sessions that have been
running for a while.
Fixes#115🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
- Handle empty repos in ConfigureSparseCheckout (skip read-tree when no HEAD)
- Fix errcheck: wrap fileLock.Unlock() error in defer
- Fix unparam: remove unused *rig.Rig return from getWitnessManager
- Fix unparam: mark unused agentType parameter with blank identifier
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
detectCurrentTmuxSession() was only accepting gt-* prefix sessions,
rejecting town-level sessions like hq-mayor. Now accepts both gt-*
and hq-* prefixes.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Witness and Refinery startup was duplicated across cmd/witness.go, cmd/up.go,
cmd/rig.go, and daemon.go. Worse, not all code paths sent the propulsion nudge
(GUPP - Gas Town Universal Propulsion Principle). Now unified in Manager.Start()
which handles everything including nudges.
Changes:
- witness/manager.go: Full rewrite with session creation, env vars, theming,
WaitForClaudeReady, startup nudge, and propulsion nudge (GUPP)
- refinery/manager.go: Add propulsion nudge sequence after Claude startup
- cmd/witness.go: Simplify to just call mgr.Start(), remove ensureWitnessSession
- cmd/rig.go: Use witness.Manager.Start() instead of inline session creation
- cmd/start.go: Use witness.Manager.Start()
- cmd/up.go: Use witness.Manager.Start(), remove ensureWitness(),
add EnsureSettingsForRole in ensureSession()
- daemon.go: Use witness.Manager.Start() and refinery.Manager.Start() for
unified startup with proper nudges
This ensures all agent startup paths (gt witness start, gt rig boot, gt up,
daemon restarts) consistently apply GUPP propulsion nudges.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Settings creation was scattered across multiple places (createPatrolHooks,
ensurePatrolHooks, inline code). Now unified via claude.EnsureSettingsForRole().
Changes:
- Add "deacon" to autonomous roles in claude/settings.go
- Remove ensurePatrolHooks() from cmd/deacon.go, use EnsureSettingsForRole
- Remove createPatrolHooks() from rig/manager.go (no longer needed at rig add)
- Add EnsureSettingsForRole call in crew_lifecycle.go
- Add doctor check for stale/missing Claude settings files
- Wire up claude-settings check in cmd/doctor.go
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add a new 'prefix-mismatch' check to gt doctor that detects when the
prefix configured in rigs.json differs from what routes.jsonl actually
uses for a rig's beads.
This can happen when:
- deriveBeadsPrefix() generates a different prefix than what's in the DB
- Someone manually edited rigs.json with the wrong prefix
- Beads were initialized before auto-derive existed with a different prefix
The check is fixable: running 'gt doctor --fix' will update rigs.json
to match the actual prefixes from routes.jsonl.
Includes comprehensive tests for:
- No routes (nothing to check)
- No rigs.json (nothing to check)
- Matching prefixes (OK)
- Mismatched prefixes (Warning)
- Fix functionality
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Per docs/architecture.md, Witness and Refinery are rig-level agents that
should use the rig's configured prefix (e.g., pi- for pixelforge) instead
of hardcoded "gt-".
This extends PR #183's creation fix to also fix all lookup paths:
- internal/rig/manager.go: Create agent beads in rig beads with rig prefix
- internal/daemon/daemon.go: Use rig prefix when looking up agent state
- internal/daemon/lifecycle.go: Use rig prefix for identity-to-bead mapping
- internal/cmd/sling.go: Pass townRoot for prefix lookup
- internal/cmd/unsling.go: Pass townRoot for prefix lookup
- internal/cmd/molecule_status.go: Use rig prefix for agent bead lookups
- internal/cmd/molecule_attach.go: Use rig prefix for agent bead lookups
- internal/config/loader.go: Add GetRigPrefix helper
Without this fix, the daemon would:
- Create pi-gastown-witness but look for gt-gastown-witness
- Report agents as missing/dead when they are running
- Fail to manage agent lifecycle correctly
Based on work by Johann Taberlet in PR #183.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Johann Taberlet <johann.taberlet@gmail.com>
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
In startConfiguredCrew(), only HasSession() was checked, missing the case
where a tmux session exists but Claude has exited. Now checks IsClaudeRunning()
and restarts Claude with BuildCrewStartupCommand if dead, matching the behavior
in runStartCrew(). (gt-ms8s4)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add --purge flag to gt crew remove that:
- Deletes the agent bead (not just closes it)
- Unassigns any beads assigned to the crew member
- Properly handles git worktrees (not just regular clones)
- Add gt doctor crew-worktrees check to detect stale cross-rig worktrees
- Worktrees in crew/ with hyphenated names are now properly cleaned up
using git worktree remove instead of rm -rf
The --purge flag is for accidental/test crew that should leave no trace
in the capability ledger. Normal crew removal closes the agent bead to
preserve CV history per HOP architecture.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Session-ended event beads were accumulating without being processed.
Modified costs.go to auto-close these events immediately after creation
since they are informational audit events. The event data is preserved
in the closed bead and remains queryable.
Also bulk-closed 83 existing stale session-ended events.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt crew start beads and gt crew stop beads now default to --all
behavior when no crew names are specified, matching user expectations.
- crew start: accepts 0-1 args (rig only) and starts all crew
- crew stop: detects if single arg is a rig name vs crew name
- Updated help text with new examples
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Global agents like mayor and deacon are town-level agents that should use
the "hq-" prefix, not "gt-". Changed to use AgentBeadIDWithPrefix with
TownBeadsPrefix for consistency with the beads architecture.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add DefaultBranch field to RoleData struct
- Update refinery.md.tmpl to use {{ .DefaultBranch }} template variable
- Populate DefaultBranch from rig config in prime.go and rig/manager.go
- Default to 'main' if not configured
- Add test verifying DefaultBranch rendering in refinery template
Fixes issue where refinery agents merged to master instead of the
configured default branch (e.g., 'develop' or 'develop-cstar').
The test helper createTestGitRepo was using plain `git init` which
creates a branch based on the system's init.defaultBranch config.
When AddRig tries to detect and checkout the default branch, it
falls back to "main" if detection fails, causing "pathspec 'main'
did not match" errors in CI where the system default is "master".
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Town-level services (Mayor, Deacon) now use hq- prefix instead of gt-:
- hq-mayor (was gt-mayor)
- hq-deacon (was gt-deacon)
This distinguishes town-level sessions from rig-level sessions which
continue to use gt- prefix (gt-gastown-witness, gt-gastown-crew-max, etc).
Changes:
- session.MayorSessionName() returns "hq-mayor"
- session.DeaconSessionName() returns "hq-deacon"
- ParseSessionName() handles both hq- and gt- prefixes
- categorizeSession() handles both prefixes
- categorizeSessions() accepts both prefixes
- Updated all tests and documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Fixes gt-v07fl: Polecat lifecycle cleanup for stale worktrees and git
tracking conflicts.
Changes:
1. Add .claude/ to .gitignore (prevents untracked file accumulation)
2. Add beads runtime state patterns to .gitignore (prevents future tracking)
3. Remove .beads/ runtime state from git tracking (mq/, issues.jsonl, etc.)
- Formulas and config remain tracked (needed for go install)
- Created follow-up gt-mpyuq for formulas refactor
4. Add DetectStalePolecats() to polecat manager for identifying cleanup candidates
5. Add CountCommitsBehind() to git package for staleness detection
6. Add `gt polecat stale <rig>` command for stale polecat detection/cleanup
- Shows polecats without active sessions
- Identifies polecats far behind main (configurable threshold)
- Optional --cleanup flag to auto-nuke stale polecats
The existing `gt polecat gc` command handles branch cleanup.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When slinging rig-level beads (gt-*, bd-*, etc.), the BEADS_DIR was
unconditionally set to town beads, which could bypass the redirect-based
routing needed for these beads. This caused assignee updates to potentially
fail silently or target the wrong database.
Changes:
- sling.go: Only set BEADS_DIR for town-level (hq-*) beads; rig-level
beads now use redirect from polecat worktree for proper routing
- convoy.go: Add --no-daemon to bd show calls to ensure fresh data
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Introduces a typed CleanupStatus with constants:
- CleanupClean, CleanupUncommitted, CleanupStash, CleanupUnpushed, CleanupUnknown
Adds helper methods:
- IsSafe(): true for clean status
- RequiresRecovery(): true for uncommitted/stash/unpushed
- CanForceRemove(): true if force flag can bypass
Updated files to use the new type:
- internal/polecat/types.go: Type definition and methods
- internal/polecat/manager.go: Validation logic
- internal/witness/handlers.go: Nuke safety checks
- internal/cmd/done.go: Status reporting
- internal/cmd/polecat.go: Recovery status checks
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Previously, when gt done was called, it cleared the agent's hook_bead
slot but didn't update the status of the hooked bead itself. This left
handoff beads with status=hooked forever.
Now the hooked bead is closed (status changed from hooked to closed)
before clearing the agent's hook slot.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The --molecule flag was defined but never wired up - the slingMolecule
variable was set by the flag parser but never read by any code path.
Users should use --on instead, which is fully implemented:
gt sling <formula> --on <bead> <target>
The --on flag properly instantiates the formula (cook + wisp + bond)
and applies it to the target bead before slinging.
Keeping --on as the canonical way to apply formulas to beads since it's
actually wired up and working. The --molecule flag can be re-added later
if a different argument order is desired.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The --quality flag (basic|shiny|chrome) referenced mol-polecat-* formulas
that were removed in c47a746 ("Remove obsolete polecat formula files") but
the flag code was left behind, causing errors when used.
Rather than restore the formulas, remove the flag entirely since:
- The default `gt sling <bead> <rig>` is now the standard workflow
- Formula-on-bead via `--on` or `--molecule` covers custom workflows
- The quality-level formulas were intentionally deprecated
Removes:
- --quality/-q flag and help text
- qualityToFormula() function
- Quality Levels section from command documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add --no-daemon to all 17 bd exec calls to bypass daemon socket timing issues
- Set BEADS_DIR in verifyBeadExists() so bd can find beads from any directory
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
