Add FindMRForBranch helper to check for existing MR beads before creating.
If an MR already exists for the branch, skip creation and reuse it.
This makes gt done safe to re-run if interrupted mid-execution.
Implements Option C from gt-svdsy: idempotent operations that check
if already done before doing, making it safe to retry.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Claude can take 30s+ to start on slower machines, causing
premature GUPP nudges before Claude is ready.
(bd-11lm)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove TouchTownActivity() calls from root.go PersistentPreRun hook
- Remove ReadTownActivity() and activity-based backoff from daemon.go
- Delete TouchTownActivity/ReadTownActivity functions from keepalive.go
- Replace dynamic backoff with fixed 10-min recovery heartbeat
Normal wake is now handled by feed subscription (bd activity --follow).
The daemon is a safety net for dead sessions, GUPP violations, and orphaned work.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Boot is spawned by the daemon as the Deacons watchdog. During shutdown
Boot was never explicitly stopped. Now gt down stops Boot between Mayor
and Deacon (step 3) to ensure clean shutdown.
Generated with Claude Code
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add queue address detection following the same pattern as list address
detection. Includes tests in router_test.go.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Changed autoSpawnPatrol to use --status=hooked instead of --status=pinned.
This ensures patrol wisps are visible to gt mol status and trigger autonomous mode.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Role templates (crew, polecat, mayor, deacon, witness, refinery)
- prime.go startup protocol messages
- Documentation (propulsion, reference, molecules, wisp architecture)
- Session hints and sling prompts
- Formula template instructions
- CLAUDE.md
The hook is the user-facing concept, molecules are implementation details.
Agents should use `gt hook` to check what work is assigned to them.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Boot was spawning in deaconDir, causing it to read Deacon's CLAUDE.md
instead of its own role context. Now:
- Creates session in ~/gt/deacon/dogs/boot/
- Ensures bootDir exists with Boot's CLAUDE.md
- Passes "gt boot triage" as initial prompt for immediate execution
(gt-tc58x)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rewrote gt mol help to focus on agent operations (YOUR hook, YOUR work)
- Removed misleading "use bd mol pour" guidance (gt sling handles this)
- Added gt formulas command as convenience wrapper for bd formula list
- Agents no longer need to know about bd for common workflow operations
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements "vet mode" - the doctor checks on the Boot watchdog:
- Boot directory presence
- Session status (alive/not running)
- Last execution status and errors
- Marker file freshness (stale marker indicates crash)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Makes 'gt hook' (no args) show hook status instead of requiring a bead ID.
Also adds 'gt hook status' subcommand for explicit usage. The hook concept
is user-facing while molecules are implementation details.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The Mayor should dispatch work to crew/polecats, not edit code directly.
mayor/rig exists as the source for worktrees, not as a working directory.
Key changes:
- Remove "Edit code here" instruction
- Add warning about staged changes accumulating
- Point to gt worktree for cross-rig work
- Clarify coordinator vs implementer distinction
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Accidentally included staged reverts in previous commit. Restoring:
- convoyAddCmd for 'gt convoy add' command
- Event filtering/deduplication in feed model
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add WorktreeAddExistingForce to git package (uses --force flag)
- Fix worktree creation: use force flag so main can be checked out
in multiple worktrees (needed for cross-rig work)
- Implement 'gt worktree remove <rig>' with --force flag
- Refuse to remove worktrees with uncommitted changes unless forced
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements the 'add' subcommand to convoy that:
- Validates the convoy exists
- Automatically reopens closed convoys
- Adds 'tracks' dependency for each issue
- Warns but doesn't fail on issues that can't be added
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Two issues with the feed reported by user:
1. Empty entries showing "→ updated" with no bead ID
2. Same bead updated 8 times in 2 seconds (when adding multiple deps)
Fixes:
- Filter out update events with empty Target (bead ID)
- Deduplicate rapid updates to same bead within 2 second window
Root cause of empty IDs is in beads daemon (filed bd-sco6).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
SessionStart now sends a PropulsionNudge after the beacon to trigger
Claude to check the hook and begin work immediately. This makes the
propulsion principle bulletproof - agents no longer wait for witness
to nudge them.
GUPP = Gas Town Universal Propulsion Principle:
"If work is on your hook, YOU RUN IT."
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add safety check to HandleMerged that verifies cleanup_status from the
polecat's agent bead before allowing nuke. This prevents work loss when:
- MERGED signal arrives for a stale MR (already merged via different path)
- Polecat has new unpushed work since the MR was created
- Race condition between merge and nuke
The Witness now blocks nuke and sets an error for escalation when:
- has_uncommitted: polecat has uncommitted changes
- has_stash: polecat has stashed work
- has_unpushed: polecat has unpushed commits (critical)
Clean status or unknown status (backward compat) allows nuke to proceed.
(gt-5q6jr)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add gt polecat check-recovery command to check cleanup_status from agent bead
- Update gt polecat nuke to block on polecats with unpushed work (use --force to override)
- Add EscalateRecoveryNeeded function for RECOVERY_NEEDED escalations
- Update Witness template with dormant polecat recovery protocol
Prevents accidental data loss when cleaning up dormant polecats that have
unpushed commits. The Witness should now use check-recovery before nuking
and escalate NEEDS_RECOVERY cases to the Mayor.
(gt-cloml)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Parent commands (mol, mail, crew, polecat, etc.) previously showed help
and exited 0 for unknown subcommands like "gt mol foobar". This masked
errors in scripts and confused users.
Added requireSubcommand() helper to root.go and applied it to all parent
commands. Now unknown subcommands properly error with exit code 1.
Example before: gt mol unhook → shows help, exits 0
Example after: gt mol unhook → "Error: unknown command "unhook"", exits 1
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Examples:
gt crew add murgen croaker goblin # Create all three
gt crew add dave # Still works for single
- Continues on failure (warns but doesn't abort)
- Shows summary at end
- Existing workspaces skipped with warning
- Rig add now creates empty crew/ directory with README
- Crew members must be added explicitly with 'gt crew add <name>'
- Removed --crew flag from rig add command
- Updated help text and output to reflect new behavior
This gives users control over crew member names rather than defaulting to 'max'.
Agents weren't auto-executing after gt handoff because the SessionStart
hook only outputs text - it doesn't inject a prompt. Claude needs actual
user input to trigger a response.
The fix: pass "gt prime" as an argument to claude, just like gt crew at
already does. This treats the argument as the first user prompt, which
triggers GUPP execution immediately.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add DefaultBranch() method to git package to detect repo's default branch
- Store default_branch in rig config.json
- Use detected branch for refinery worktree instead of hardcoding 'main'
- Add LoadRigConfig() to read rig config
- Display correct branch name in rig add output
Fixes wyvern rig creation (uses 'master' not 'main').
Agent beads must use gt- prefix (required by beads validation).
Only issue beads use rig-specific prefixes (ga-, bd-, etc.).
Fixed in:
- crew_add.go: Use CrewBeadID() not CrewBeadIDWithPrefix()
- prime.go: Use non-prefix variants for all agent types
- sling.go: Use non-prefix variants for all agent types
This fixes 'invalid agent ID' error when creating crew in rigs
with non-gt prefix (e.g., gastown with ga- prefix).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Convoy: Persistent tracking unit for batched work across rigs
- Swarm: Ephemeral workers on a convoy (no separate tracking)
Changes:
- docs/convoy.md: New comprehensive convoy documentation
- docs/swarm.md: Updated to explain ephemeral nature
- docs/reference.md: Replace swarm section with convoy commands
- internal/cmd/convoy.go: Clarify help text
- internal/cmd/swarm.go: Mark as deprecated
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Cherry-picked from 77f9da07 - work that was done but never merged to main.
Found during orphan audit: 73 commits identified as potentially lost work.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements `gt worktree list` to show all cross-rig worktrees owned
by the current crew member. Scans all rigs and shows git status
summary for each worktree found.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Work is NOT landed until it's either on main or in the Refinery MQ.
Feature branches are dangerous in multi-agent environments - the repo
baseline can diverge wildly in hours.
Add documentation for crew workers using cross-rig worktrees:
- Added Cross-Rig Worktrees section to crew.md.tmpl template
- Created docs/understanding-gas-town.md with role taxonomy
Key points documented:
- Crew vs Dogs distinction (dogs = Deacon infra, not user work)
- Identity preservation across rigs (BD_ACTOR stays the same)
- When to use worktrees vs dispatch to local workers
- Directory structure convention: ~/gt/<rig>/crew/<source-rig>-<name>/
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Using "greenplace" (The Green Place from Mad Max: Fury Road) as the
canonical example project/rig name in documentation and help text.
This provides a clearer distinction from the actual gastown repo name.
Changes:
- docs/*.md: Updated all example paths and commands
- internal/cmd/*.go: Updated help text examples
- internal/templates/: Updated example references
- Tests: Updated to use greenplace in example session names
Note: Import paths (github.com/steveyegge/gastown) and actual code
paths referencing the gastown repo structure are unchanged.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements the gt worktree <rig> command that allows crew workers to
create worktrees in other rigs for cross-rig work while maintaining
their identity.
Features:
- Detects crew identity from cwd (requires crew/ directory)
- Creates worktree at <target-rig>/crew/<source-rig>-<name>/
- Sets up git config for identity preservation
- Handles edge cases: already exists, rig not found, wrong role
Usage: gt worktree beads (from gastown/crew/joe → beads/crew/gastown-joe/)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Inject an identity beacon as the first message when Gas Town starts Claude
sessions. This beacon becomes the session title in Claude Code '/resume
picker, enabling workers to find their predecessor sessions for debugging.
Beacon format: [GAS TOWN] <address> • <mol-id or "ready"> • <timestamp>
Examples:
- [GAS TOWN] gastown/crew/max • gt-abc12 • 2025-12-30T14:32
- [GAS TOWN] gastown/polecats/Toast • ready • 2025-12-30T09:15
- [GAS TOWN] deacon • patrol • 2025-12-30T08:00
Workers can now press / in /resume picker and search for their address
(e.g., "gastown/crew/max") to see all predecessor sessions.
Note: Respawn-loop agents (deacon/refinery via up.go) skip beacon injection
since Claude restarts multiple times - would need post-restart injection.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When spawning polecats in rigs with custom prefixes (e.g., beads uses bd-
instead of gt-), agent beads were being created with hardcoded gt- prefix,
causing warnings like issue ID gt-beads-polecat-obsidian does not match
configured prefix bd.
Changes:
- polecat/manager.go: agentBeadID() now looks up the rigs configured prefix
from routes.jsonl via beads.GetPrefixForRig()
- prime.go: getAgentBeadID() now uses prefix lookup for rig-level agents
(witness, refinery, polecat, crew)
Town-level agents (mayor, deacon) continue to use gt- prefix as expected.
The --notify flag on gt convoy create was captured but never used.
This fix:
1. Stores the notify address in a bd slot when convoy is created
2. Adds 'gt convoy notify <convoy-id>' command that:
- Reads the notify slot
- Sends mail to the configured address with convoy completion details
- Does nothing gracefully if no notification was configured
The convoy-cleanup formula can now call 'gt convoy notify {{convoy}}'
to trigger the configured notification when a convoy completes.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Polecats for a rig now cycle among themselves, like crew members.
Session groups are now:
- Town: Mayor ↔ Deacon
- Crew: All crew in same rig
- Rig infra: Witness ↔ Refinery
- Polecats: All polecats in same rig
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New command that queries work history across multiple sources:
- Git commits authored by an actor
- Beads created/closed by an actor
- Town log events (spawn, done, handoff, etc.)
- Activity feed events
Supports --actor for filtering, --since for time range, --json for
machine-readable output, and -n/--limit for result count.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create() function now defaults Actor from BD_ACTOR env var when not provided
- CreateAgentBead() now passes --actor flag from BD_ACTOR for provenance tracking
- This ensures created_by is populated on all issue creation paths
Affects: merge requests, escalations, digests, agent beads, molecule steps
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add Delegation and DelegationTerms structs for tracking work delegation
between work units. This enables the HOP pattern of work flowing down
and credit cascading up.
New types:
- Delegation: Links parent and child work units with delegated_by/to
- DelegationTerms: Optional terms including portion, deadline, credit_share
New functions:
- AddDelegation: Create a delegation relationship
- RemoveDelegation: Remove a delegation relationship
- GetDelegation: Retrieve delegation info for a child work unit
- ListDelegationsFrom: List all delegations from a parent
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds federation identity fields to town.json:
- Owner: email address for entity identity (defaults to git user.email)
- PublicName: public display name (defaults to town name)
Schema version bumped to 2. Existing town.json files remain compatible
as new fields are optional.
Also adds --owner and --public-name flags to 'gt install'.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Boot is a watchdog that the daemon pokes instead of Deacon directly,
centralizing the 'when to wake Deacon' decision in an agent that can
reason about context.
Key changes:
- Add internal/boot package with marker file and status tracking
- Add gt boot commands: status, spawn, triage
- Add mol-boot-triage formula for Boot's triage cycle
- Modify daemon to call ensureBootRunning instead of ensureDeaconRunning
- Add tmux.IsAvailable() for degraded mode detection
- Add boot.md.tmpl role template
Boot lifecycle:
1. Daemon tick spawns Boot (fresh each time)
2. Boot runs triage: observe, decide, act
3. Boot cleans stale handoffs from Deacon inbox
4. Boot exits (or handoffs in non-degraded mode)
In degraded mode (no tmux), Boot runs mechanical triage directly.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The test expected CLAUDE.md to be created by Add(), but the code
intentionally skips this (CLAUDE.md is injected via SessionStart
hook to avoid leaking Gas Town context into project repos).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add input validation for convoyID before using it in SQL query.
Issue IDs must match ^[a-zA-Z0-9_-]+$ to prevent injection attacks.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
