Add support for signaling phase completion when a polecat needs to wait
on a gate before continuing. The --phase-complete flag with --gate ID
allows polecats to hand off control while awaiting external conditions.
Changes:
- done.go: Add --phase-complete and --gate flags, PHASE_COMPLETE exit type
- protocol.go: Add Gate field to PolecatDonePayload
- handlers.go: Handle PHASE_COMPLETE by recycling session (keep worktree)
- beads.go: Add AddGateWaiter method for gate registration
This enables multi-phase molecule workflows with async coordination (bd-gxb4)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Town-level agents (mayor/, deacon/) need trailing slash to match
addressToIdentity() normalization.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Convoys in town beads track issues in rig beads via external:rig:id
references. When bd close runs in a rig, the convoy auto-close logic
only checks the local database, missing convoys in town beads.
This adds `gt convoy check` to bridge that gap:
- Finds all open convoys in town beads
- Checks if all tracked issues (across rigs) are closed
- Auto-closes completed convoys
- Sends notification if convoy has notify address
Can be called manually or by deacon patrol.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When running bd update commands for hq-* beads from a polecat worktree,
the redirect mechanism only exposes gt-* beads. This fix sets BEADS_DIR
to the town-level .beads directory so hq-* beads are accessible.
Also adds NewWithBeadsDir() constructor to beads package for explicit
cross-database access when needed.
Previously, when running `gt polecat nuke <name> <rig>`, the parseAddress
function would infer the rig from cwd for each argument, causing a plain
rig name to be misinterpreted as a polecat name. For example, running from
a gastown directory:
gt polecat nuke angharad gastown --force
Would try to nuke both gastown/angharad AND gastown/gastown.
Now both runPolecatNuke and runPolecatRemove validate that each address
argument contains "/" before parsing, enforcing the documented
`<rig>/<polecat>` format and preventing this misinterpretation.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When first arg to `gt convoy create` looks like a beads issue ID
(e.g., gt-abc, bd-xyz), treat all args as issues and auto-generate
the convoy name from the first issue title.
This prevents the bug where `gt convoy create gt-abc` would use
"gt-abc" as the convoy name instead of recognizing it as an issue
to track.
(gt-7qyfh)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The command already clears all messages by default, but agents naturally
try --all when they want to clear everything. Adding it as a no-op flag
improves discoverability and natural usage patterns.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When slinging to an existing polecat, the bd update command was running
from town root which doesn't support prefix-based routing for writes.
Fix: Capture the target agent's working directory from resolveTargetAgent
and use it as hookWorkDir. This ensures bd update runs from the polecat's
worktree where the .beads/redirect file enables routing to the correct
database.
Also fixed the self-sling case to capture and use selfWorkDir.
When Claude starts with --dangerously-skip-permissions, it shows a warning
dialog requiring Down+Enter to accept. This blocked automated polecat and
agent startup.
Added AcceptBypassPermissionsWarning() to tmux package that:
- Checks if the warning dialog is present by capturing pane content
- Only sends Down+Enter if "Bypass Permissions mode" text is found
- Avoids interfering with sessions that don't show the warning
Updated all Claude startup locations:
- session/manager.go (polecat sessions)
- cmd/up.go (mayor, witness, crew, polecat cold starts)
- daemon/daemon.go (crashed polecat restarts)
- daemon/lifecycle.go (role session starts)
Polecats need access to town-level beads (hq- prefix) for hooks and
convoys. Update session manager to set BEADS_DIR to town root .beads/
instead of rig-level .beads/.
Also update mail.go's findLocalBeadsDir() to respect the BEADS_DIR
environment variable, which is necessary for polecats using
redirect-based beads access.
When slinging work to a polecat, run bd commands from the polecat's
worktree directory instead of town root. This enables redirect-based
routing to work correctly since the polecat's .beads/redirect file
points to the canonical database location.
Adds hookWorkDir variable to track the polecat's clone path and passes
it to updateAgentHookBead for proper beads access.
Route to the correct beads location based on whether the source repo
has .beads/ tracked in git:
- If source has .beads/ tracked: route to mayor/rig/.beads
- Otherwise: route to rig root .beads/ (created by initBeads)
Updates both route registration in rig.go and polecat manager's
NewManager/setupSharedBeads to use consistent conditional logic.
Add --exit flag to `gt done` that terminates the Claude session
immediately after submitting the MR to the merge queue. This prevents
polecats from sitting idle (and wasting money) while waiting for the
Witness to kill them.
Changes:
- Rename existing --exit flag to --status (for exit type)
- Add new --exit boolean flag for session self-termination
- Update docs and help text to reflect new flag names
Usage: gt done --exit
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Updated `gt costs record` to create session.ended events in beads
- Updated `gt costs --today/--week` queries to use bd instead of JSONL
- Removed JSONL ledger support (getLedgerPath, readLedger, WriteLedgerEntry)
- Session costs now stored with event_kind, actor, target, and payload fields
- Filed bd-xwvo for beads bug where --rig flag loses event fields
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Changed command signature from `gt crew start [name...]` to
`gt crew start <rig> [name]` with --all flag support:
- Takes rig as first required positional argument
- Optional crew member name(s) as subsequent arguments
- --all flag to start all crew members in the rig
- Validates that either name or --all must be provided
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds a new doctor check that verifies all settings.json files in the
town use session-start.sh wrapper for SessionStart and PreCompact hooks.
Without this wrapper, session_id passthrough fails, which breaks
gt seance discovery of sessions.
The check:
- Scans all settings.json files across town, rigs, crew, and polecats
- Warns if any file uses bare 'gt prime' without session-start.sh
- Provides fix hint pointing to the correct wrapper configuration
(gt-77fhi)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add new `gt rig stop <rig>...` command that supports stopping multiple rigs
with the same shutdown semantics as `gt rig shutdown`:
- Stops all polecat sessions
- Stops the refinery (if running)
- Stops the witness (if running)
- Checks for uncommitted work before shutdown (unless --nuclear)
Includes --force flag for immediate shutdown and --nuclear flag to bypass
safety checks. (gt-lhitf)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add new 'gt rig start <rig>...' command that starts witness and refinery
on patrol for one or more rigs. Similar to 'gt rig boot' but supports
multiple rigs in a single invocation.
- Iterates over all provided rig names
- Skips already-running agents with clear output
- Reports success/failure per-rig with summary
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Shows detailed status for a specific rig including all workers:
- Rig info (name, path, beads prefix)
- Witness status (running/stopped, uptime)
- Refinery status (running/stopped, uptime, queue size)
- Polecats (name, state, assigned issue, session status)
- Crew members (name, branch, session status, git status)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The status line was counting rigs based on tmux session names without
validating they were actually registered in mayor/rigs.json. This could
cause incorrect rig counts when session names matched the pattern but
were not real rigs.
Now loads registered rigs from rigs.json and only counts:
- Rigs that are actually registered
- Polecats belonging to registered rigs
Fixes#17🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add repo-fingerprint check to gt doctor that verifies beads databases have
valid repository fingerprints. Missing or empty fingerprints can cause daemon
startup failures and sync issues.
The check:
- Uses bd doctor --json to check fingerprint status
- Runs on town-level and rig-level beads directories
- Can fix by running bd migrate --update-repo-id
- Restarts daemon after migration if it was running
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add a new doctor check that verifies the bd (beads) daemon is running
and healthy. When the daemon fails to start, the check:
- Surfaces specific error messages (legacy database, repo mismatch)
- Provides one-liner fix commands
- Auto-fixes by running bd migrate --update-repo-id when appropriate
This addresses GH #25: gt status slow when bd daemon not running.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add bd daemon health check at the start of gt status:
- Check daemon health via bd daemon health --json
- Attempt restart if daemons are unhealthy (version mismatch, stale, unresponsive)
- Show warning at end of status output if daemons could not be started
- Non-blocking: status display continues regardless of daemon state
This prevents the 39+ second slowdown when bd daemons are not running
properly, as each bd command falls back to slow direct mode.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements cost tracking v1 for Gas Town agents:
- `gt costs` shows live costs scraped from running tmux sessions
- `gt costs --today/--week` shows historical costs from ledger
- `gt costs --by-role/--by-rig` shows cost breakdowns
- `gt costs record` for Stop hook integration to record final costs
Cost ledger stored at ~/.gt/costs.jsonl with JSONL entries per session.
Ref: gt-nrpiq
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Town beads should use 'hq-' prefix to match documented architecture:
- Town beads (~/gt/.beads/): hq-* prefix for mayor mail, coordination
- Rig beads: project-specific prefix
The 'gm' prefix was causing convoy creation failures due to prefix
mismatch.
Fixes#19🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add internal/deps package for dependency management
- Check for bd before gt install and gt rig add
- Auto-install bd via go install if missing
- Version check warns if bd is too old (min: 0.43.0)
Closes#22🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
initAgentBeads and crew_add were looking for beads at mayor/rig/.beads/
but during initial creation, beads is at rig root. The redirect
mechanism to mayor/rig/.beads/ gets set up later.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
buildAgentIdentity was returning 2-part format (rig/name) while
sling.go sets assignee using 3-part format (rig/polecats/name) from
session.AgentIdentity.Address(). This mismatch caused gt hook to
fail when querying for hooked beads by assignee.
Changes:
- buildAgentIdentity: Return rig/polecats/name for polecats
- buildAgentBeadID: Handle both 2-part and 3-part formats
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add announces subcommand to internal/cmd/mail.go that provides:
- gt mail announces: Lists all announce channels from messaging.json
- gt mail announces <channel>: Reads messages from a specific channel
The command queries beads for messages with announce_channel label and
displays them in reverse chronological order. Messages are NOT marked
as read or removed, preserving bulletin board semantics.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Show ✓ for closed, ▶ for in_progress/hooked, ○ for other statuses
- Display assignee name in brackets instead of issue type
- Falls back to issue type when no assignee, or "unassigned" when neither
Closes gt-cbstf
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New outputSessionMetadata() function prints a structured line at prime start:
[GAS TOWN] role:mayor pid:12345 session:abc-uuid-123
This enables gt seance to discover sessions from Claude transcripts,
complementing the existing event emission to .events.jsonl.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds `gt mail search <query>` command with:
- Regex pattern matching (case-insensitive by default)
- --from: Filter by sender address
- --subject: Only search subject lines
- --body: Only search message body
- --archive: Include archived (closed) messages
- --json: Output as JSON
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt swarm create was failing when using a pre-existing epic because
it tried to call `bd update --mol-type=swarm`, but bd update doesn't
support the --mol-type flag.
Fix: Only set mol-type during bd create (when epic doesn't exist.
Pre-existing epics work as-is since swarm functionality doesn't
depend on the mol-type field.
Closes gt-zqt4d
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
EOF
)
When -m flag is not provided, opens $EDITOR to compose the reply.
The editor shows a template with the original message for context.
Comment lines (starting with #) are filtered out.
- Makes -m flag optional instead of required
- Falls back to vim/vi/nano/emacs if $EDITOR not set
- Updates help text to document editor mode (gt-d46.5)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add --quiet (-q) flag for scripted mail checks:
- Outputs "N new message(s)" only when mail exists
- Silent output when no mail (exit 1)
- Fixes usage output being shown on exit 1
(gt-d46.1)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- gt mail mark <id> --read/--unread: Change message read status
- gt mail delete <id> --force: Add confirmation prompt (skip with --force)
- gt mail archive: Batch operations with --older-than, --all-read, --dry-run
- gt mail purge: Delete archived messages with --older-than, --dry-run, --force
- gt mail search <query>: Regex search with --from, --subject, --body, --json
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The display was normalizing idle → working which was misleading.
Idle polecats should show as idle so operators know to nuke them.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add worker information to convoy status display:
- Query agent beads across rigs for matching hook_bead
- Display worker inline with tracked issues: @gastown/nux (12m)
- Include Worker and WorkerAge in JSON output
- Skip worker lookup for closed issues
Example output:
Tracked Issues:
○ gt-xyz: Fix bug [task] @gastown/nux (12m)
✓ gt-abc: Add feature [task]
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use NoOptDefVal so --notify defaults to "mayor/" when specified without
a value:
- `--notify` (no arg) -> defaults to "mayor/"
- `--notify ops/` -> uses "ops/"
- (no flag) -> no notification
Removed the mayor-specific auto-default since NoOptDefVal handles this
for all roles.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use golang.org/x/text/cases.Title(language.English) instead of the
deprecated strings.Title function. Updated formula.go (3 usages)
and patrol_helpers.go (1 usage).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add --collect/-c flag to gt handoff: auto-collects hooked work,
inbox summary, ready beads, and in-progress items into the handoff
message body
- Add --handoff flag to gt resume: checks inbox for messages with
"HANDOFF" in subject and displays them formatted for continuation
- Supports both JSON and plain-text inbox output formats
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add 7 new checks for rig health when using `gt doctor --rig <name>`:
- rig-is-git-repo: Verify mayor/rig/ is a valid git clone
- git-exclude-configured: Check .git/info/exclude has Gas Town dirs (fixable)
- witness-exists: Verify witness/ structure exists (fixable)
- refinery-exists: Verify refinery/ structure exists (fixable)
- mayor-clone-exists: Verify mayor/rig/ clone exists (fixable)
- polecat-clones-valid: Verify polecat directories are valid clones
- beads-config-valid: Verify beads configuration works (fixable)
Checks are only registered when --rig flag is provided.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
