Haiku-based smart stuck detection

Use Haiku to analyze tmux state when signals are ambiguous.

## When to Invoke

Only as escalation tier:
1. Keepalive is stale (> 2 min)
2. Tmux shows claude is running (not idle shell)
3. Heuristics can't determine state

## Prompt

Capture last 50 lines of tmux pane, ask Haiku:
'Is this Claude agent: WORKING | STUCK | IDLE | WAITING_FOR_HUMAN?'

## Cost

~$0.001 per check. At 1 check/min worst case = $0.06/hour.
In practice, most checks avoided by keepalive signal.

## Configuration

```toml
[daemon]
smart_detection = true
smart_model = "haiku"
smart_threshold = "2m"  # only check if stale > 2min
```


Ephemeral polecats: spawn fresh, delete on completion

## Design Decision

Switch from pooled/idle polecats to ephemeral model:
- Spawn creates fresh worktree from main
- Polecat requests shutdown when done (bottom-up)
- Witness verifies handoff, kills session, deletes worktree
- No 'idle' state - polecats exist only while working

## Rationale

1. **Git worktrees are fast** - pooling optimization is obsolete
2. **Pooling creates maintenance burden:**
   - Git stashes accumulate
   - Untracked artifacts pile up
   - Branches drift from main
   - Beads DB gets stale
3. **PGT sync problems** came from persistent branches
4. **Support infrastructure exists** - Witness, Refinery, Mayor handle continuity
5. **Simpler mental model** - polecat exists = work in progress

## Lifecycle

```
Spawn:
  gt spawn --issue <id>
  → Creates fresh worktree: git worktree add polecats/<name> -b polecat/<name>
  → Initializes beads in worktree
  → Starts session, assigns work

Working:
  Polecat does task
  → Pushes to polecat/<name> branch
  → Submits to merge queue when ready

Completion (POLECAT-INITIATED):
  Polecat runs: gt handoff
  → Verifies git state clean
  → Sends mail to Witness: "Ready for shutdown"
  → Marks itself done, waits for termination

Cleanup (WITNESS-OWNED):
  Witness receives shutdown request
  → Verifies PR merged or in queue
  → Verifies no uncommitted changes
  → Kills session: gt session stop <rig>/<polecat>
  → Deletes worktree: git worktree remove polecats/<name>
  → Deletes branch: git branch -d polecat/<name>
  → Optionally: Notifies Mayor of completion
```

## Key Insight: Bottom-Up Shutdown

**Old model (wrong)**: Top-down batch shutdown - "cancel the swarm"
**New model (right)**: Bottom-up individual shutdown - polecat requests, Witness executes

This enables streaming:
- Workers come and go continuously
- No "swarm end" to trigger cleanup
- Each worker manages its own lifecycle
- Witness is the lifecycle authority

## Implementation

1. Add `gt handoff` command for polecats to request shutdown
2. Modify gt spawn to always create fresh worktree
3. Run bd init in new worktree (beads needs initialization)
4. Add shutdown request handler to Witness
5. Witness verifies handoff, then cleans up:
   - Kill session
   - Remove worktree
   - Delete branch
6. Remove 'idle' state from polecat state machine
7. Simplify gt polecat list (only shows active)

## Impact on Other Tasks

- gt-17r (Zombie cleanup): Becomes trivial - orphan worktrees
- gt-4my (Worker health): Simpler - no idle/stuck ambiguity
- gt-f9x.5/f9x.6 (Doctor): Fewer states to validate
- gt-eu9 (Witness handoff): Witness receives polecat shutdown requests


Deacon rounds molecule: the kernel execution loop

Define and implement mol-deacon-rounds - the molecule the Deacon executes each wake.

## Molecule Definition

```markdown
# mol-deacon-rounds

The Deacon kernel - executed on every wake cycle.

## Step: session-check
Check context budget. If low, cycle to fresh session.
Needs: (none - always runs first)

## Step: health-scan
Check health of all monitored agents:
- Mayor (gt-mayor session)
- Witnesses (gt-*-witness sessions)
- Refineries (gt-*-refinery sessions)
- Crew (gt-*-* sessions, lifecycle only)

Remediate unhealthy agents:
- Restart dead sessions
- Nudge stuck agents
- Escalate if remediation fails

Needs: session-check

## Step: lifecycle
Process pending lifecycle requests from mail:
- LIFECYCLE: <identity> requesting cycle
- LIFECYCLE: <identity> requesting restart
- LIFECYCLE: <identity> requesting shutdown

Needs: health-scan

## Step: plugins
Run due plugins:
1. Check scheduled plugins (cron-like)
2. Check event-triggered plugins (from mail events)
3. Check human-requested plugins (from mail)
4. Execute each, record outcomes

Needs: lifecycle

## Step: events
Process timer and event callbacks:
- TIMER: <identity> wake at <time>
- EVENT: <type> <payload>

Notify relevant agents or trigger actions.

Needs: plugins

## Step: complete
Finalize the cycle:
1. Update heartbeat.json
2. Clear/update keepalive.json
3. Log summary
4. Return to prompt (wait for next wake)

Needs: events
```

## Execution

The Deacon reads this molecule from its pinned bead and executes steps in order.
Each step:
1. Announces "Starting <step>"
2. Performs the step logic
3. Records outcome
4. Proceeds to next step

## Step Plugins

Each step can have inline plugins (additional attention):
```yaml
step: health-scan
  plugins:
    - advanced-diagnostics  # Run if basic scan finds issues
```

## Relation to bd mol

Uses the same molecule format as bd mol for polecats.
Deacon molecule is special: it's the kernel, not work.


Auto-handoff: self-cycling with guaranteed work pickup

## Summary

A mechanism for agents to self-cycle: send handoff mail, request Deacon to kill the process, and automatically restart to pick up the work.

## Use Case

User says: `auto-handoff: gt-bug3`

The agent:
1. Sends handoff mail documenting current state
2. Requests Deacon to terminate the session
3. Deacon restarts the agent in background
4. New session picks up the handoff and continues working

When the user returns to terminal, the old session is gone but work continues in background. User can reattach.

## Key Requirements

- **Guaranteed pickup**: Something in the hook and/or handoff must ensure the new session picks up the work (not just a passive "check inbox")
- **Background execution**: Work continues without user presence
- **Reattachability**: User can reconnect to see progress

## Design Questions

1. Can molecules help coordinate this? (e.g., molecule binds the handoff + auto-restart)
2. What hook handles the pickup guarantee?
3. How does Deacon know to restart vs just kill?
4. How does user reattach to a background agent?

## Related

- Molecules system
- Deacon lifecycle management
- Handoff hooks


Add mayor/config.json for town-level configuration

Create new town-level config file:
- Add TownConfig.Config field to types.go
- Create mayor/config.json with theme defaults, daemon settings
- Update loader to read/write mayor/config.json
- Migrate any town-level config from .gastown/ to here


self-review

Review your own changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
- Security concerns

Fix any issues found before proceeding.

Depends: implement


implement

Implement the solution for gt-test123. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


CloudRunOutpost: Basic implementation

## Overview

Basic CloudRunOutpost implementation. Persistent connections and cost tracking are separate tasks.

## Implementation

```go
type CloudRunOutpost struct {
    name        string
    project     string
    region      string
    service     string
    maxWorkers  int
    client      *WorkClient
    workers     map[string]*CloudRunWorker
    mu          sync.RWMutex
}

func NewCloudRunOutpost(cfg OutpostConfig) (*CloudRunOutpost, error) {
    serviceURL := fmt.Sprintf(
        "https://%s-%s.a.run.app",
        cfg.Service, cfg.Region,
    )
    return &CloudRunOutpost{
        name:       cfg.Name,
        project:    cfg.Project,
        region:     cfg.Region,
        service:    cfg.Service,
        maxWorkers: cfg.MaxWorkers,
        client:     NewWorkClient(serviceURL),
        workers:    make(map[string]*CloudRunWorker),
    }, nil
}
```

## Spawn

```go
func (o *CloudRunOutpost) Spawn(issue string, cfg WorkerConfig) (Worker, error) {
    req := WorkRequest{
        IssueID: issue,
        Rig:     RigConfig{URL: cfg.RigURL, Branch: cfg.GitBranch},
        Beads:   BeadsConfig{URL: cfg.BeadsURL, Branch: "beads-sync"},
        Branch:  "polecat/" + issue,
    }

    events, err := o.client.DispatchWork(context.Background(), req)
    if err != nil {
        return nil, err
    }

    worker := &CloudRunWorker{
        id:      uuid.New().String(),
        outpost: o.name,
        issue:   issue,
        events:  events,
        status:  WorkerStatusWorking,
    }

    o.mu.Lock()
    o.workers[worker.id] = worker
    o.mu.Unlock()

    go worker.monitor()
    return worker, nil
}
```

## CloudRunWorker

```go
type CloudRunWorker struct {
    id      string
    outpost string
    issue   string
    status  WorkerStatus
    events  <-chan WorkEvent
    logs    []string
}

func (w *CloudRunWorker) Attach() error {
    return errors.New("Cloud Run workers do not support attach")
}

func (w *CloudRunWorker) Logs() (io.Reader, error) {
    return strings.NewReader(strings.Join(w.logs, "\n")), nil
}
```

## Files

- `internal/outpost/cloudrun.go`

## Dependencies

Depends on: gt-9a2.1 (interfaces), gt-9a2.12 (HTTP client)
Blocks: gt-9a2.13 (persistent connections), gt-9a2.14 (cost tracking)


Default crew name should be something better than 'main'

When creating a new rig, the default crew worker name is 'main'. This is confusing since:

1. 'main' is also the git branch name
2. It doesn't convey that this is the user's personal workspace
3. Crew names should feel more personal/distinct

Consider alternatives like:
- 'home' - the user's home base
- 'desk' - their personal desk
- 'joe/max/etc' - actual name-based defaults
- Let user pick during rig init


Document how to configure a Gas Town Harness

Create docs explaining what a harness is (private repo containing GT installation with rigs gitignored), why you'd want one, and how to set it up with beads redirects


orphan-check

Find abandoned work. Check for in_progress issues with no active agent.


Polecat name pooling: Bounded reusable names

Polecats reuse names from a bounded pool (50) with overflow to sequence numbers.

## Naming Scheme
- Pool: polecat-01 through polecat-50 (prefer low numbers)
- Overflow: <rigname>-<sequenceNumber> (e.g., beads-51, gastown-52)

## Design
- Witness tracks which pool names are in use
- On spawn: pick first available from pool
- If pool exhausted: use rigname-N format
- On completion: pool name returns, sequence numbers don't

## Why?
- User experience: tmux sessions survive polecat restarts
- Users stay attached, see new polecat start (like mayor respawn loop)
- Bounded resource usage for common case
- Scales beyond 50 when needed

## Implementation
- Witness maintains name allocation in beads or local state
- Tmux session runs respawn loop (like mayor)
- Name released on graceful exit or when witness detects dead session


gt daemon: Background service management

## Summary

ONE daemon for all Gas Town - a simple Go process (not a Claude agent) that:
1. Pokes agents periodically (heartbeat)
2. Processes lifecycle requests
3. Restarts sessions when agents request cycling

## Architecture

Daemon (gt daemon)
- Pokes Mayor: "HEARTBEAT: check your rigs"
- Pokes each Witness: "HEARTBEAT: check your workers"
- Has inbox at daemon/ for lifecycle requests
- Restarts sessions on cycle requests

## NOT the daemon's job:
- Making decisions (Witnesses do that)
- Running Claude (it's a Go process)
- Processing work (polecats do that)
- Direct polecat management (Witnesses do that)

The daemon is a **dumb scheduler** - poke things, execute lifecycle requests. All intelligence is in agents.

## Commands

- gt daemon start: Start daemon (background)
- gt daemon stop: Stop daemon
- gt daemon status: Show daemon status
- gt daemon logs: View daemon logs

## Daemon Loop

Every heartbeat interval:
1. Poke Mayor
2. For each rig: Poke Witness
3. Process lifecycle requests from daemon/ inbox
4. Check for dead sessions, restart if cycle requested

## Lifecycle Request Handling

Daemon checks its inbox (daemon/) for lifecycle requests:
- From Mayor: cycle/restart Mayor session
- From Witnesses: cycle/restart Witness session

On request:
1. Verify agent state shows requesting_cycle
2. Kill session
3. Start new session
4. Clear requesting_cycle flag

## Poke Protocol

Poke = tmux inject "HEARTBEAT: do your job"
- Agent ignores if already working
- Agent wakes up if idle
- Idempotent - multiple pokes are fine

## Lifecycle Hierarchy

- Daemon manages: Mayor, all Witnesses
- Witness manages: Polecats, Refinery (per rig)
- Crew: self-managed (human workspace)

## Related Issues

- gt-kmn.11: Daemon heartbeat details
- gt-gby: gt handoff command (unified lifecycle)
- gt-u1j.9: Fold witness daemon into this


Remove bd sync instruction from polecat startup workflow

Polecats are instructed to run `bd sync --from-main` on startup (spawn.go:634).

## Problem
- Spawn command already syncs beads before spawning (line 239)
- Polecats share rig-level beads via `.beads/redirect`
- Multiple polecats starting simultaneously all try to sync same shared beads
- This causes git conflicts/failures when many polecats spawn at once

## Observed
User reported: 'all polecats failing on beads sync on startup in one run'

## Fix
Remove line 634 from buildWorkAssignmentMail():
```
body.WriteString("2. Run \`bd sync --from-main\` to get fresh beads\n")
```

Polecats only need to sync at END of work (already in steps 5/7).

## Files
- internal/cmd/spawn.go: buildWorkAssignmentMail() and buildSpawnContext()


Add unit tests for daemon package

The daemon package has no unit tests. Need tests for:
- Config and state serialization
- Session name pattern matching (isWitnessSession)
- Lifecycle request parsing
- Identity to session mapping


Add molecules.jsonl as separate catalog file for template molecules


gt mq integration land: merge integration branch to main

Implement 'gt mq integration land <epic>' command.

Actions:
1. Verify all MRs targeting integration/<epic> are merged
2. Verify integration branch exists
3. Merge integration/<epic> to main (--no-ff)
4. Run tests on main
5. Push to origin
6. Delete integration branch
7. Update epic status

Options:
- --force: land even if some MRs still open
- --skip-tests: skip test run
- --dry-run: preview only

This creates a single merge commit for the entire epic's work.

Reference: docs/merge-queue-design.md#integration-branches


Swarm state persistence: manifest + state + events

Upgrade swarm persistence to match PGT pattern.

## Current State
Single .gastown/swarms.json with all swarms.

## Target State (per-swarm)
```
.gastown/swarms/
└── <swarm-id>/
    ├── manifest.json  # Immutable config
    ├── state.json     # Mutable progress
    ├── events.jsonl   # Audit log
    └── report.md      # Generated report
```

## File Schemas

### manifest.json (immutable after creation)
```json
{
  "id": "sw-1",
  "title": "Epic description",
  "epic_id": "gt-abc",
  "rig": "gastown",
  "base_commit": "abc123",
  "integration_branch": "swarm/sw-1",
  "target_branch": "main",
  "workers": ["Toast", "Nux"],
  "tasks": [{"id": "gt-xyz", "title": "..."}],
  "created_at": "2024-01-01T00:00:00Z"
}
```

### state.json (mutable)
```json
{
  "state": "active",
  "task_states": {
    "gt-xyz": {"state": "merged", "assignee": "Toast"}
  },
  "updated_at": "2024-01-01T01:00:00Z",
  "error": null
}
```

### events.jsonl (append-only audit)
```jsonl
{"event": "created", "ts": "...", "data": {...}}
{"event": "task_assigned", "ts": "...", "data": {...}}
{"event": "task_merged", "ts": "...", "data": {...}}
```

## Benefits
- Audit trail via events.jsonl
- Manifest immutability prevents corruption
- Cleaner separation of concerns
- Per-swarm isolation

## Migration
Keep backward compat with swarms.json during transition.

## Files to Modify
- internal/swarm/manager.go: Refactor persistence
- internal/cmd/swarm.go: SwarmStore → directory-based

## Acceptance Criteria
- [ ] Per-swarm directory structure
- [ ] Events logged to JSONL
- [ ] Manifest immutable after creation
- [ ] List command aggregates from directories


Pinned beads should appear first in mail inbox

Currently bd mail inbox sorts by priority then date, but pinned beads (handoff context) should always appear at the top.

**Current behavior:**
- Pinned beads mixed in with regular mail based on priority/date

**Expected behavior:**
- Pinned beads always first in inbox (before priority sorting)
- This enables handoff beads to be the default first item an agent sees

**Implementation:**
1. In mail.go runMailInbox(), after filtering, sort pinned beads to top
2. Within pinned and non-pinned groups, maintain priority/date sort

**Related:**
- gt-r8ej: Implement pinned beads for handoff state
- gt-8h4: Pinned Beads epic

**Acceptance criteria:**
- bd mail inbox shows pinned beads first
- Pinned beads still sorted by priority/date among themselves
- Non-pinned mail sorted normally after pinned section


CLI: plugin commands (list, status)

Add gt plugins <rig> to list plugins and gt plugin status <name> to check plugin state. Simple directory scan of <rig>/plugins/.


Polecats must not create GitHub PRs

Polecats should never use 'gh pr create' or create GitHub pull requests.

## Correct Workflow
1. Polecat works on polecat/<name> branch
2. Commits and pushes to origin
3. Creates beads MR issue (type: merge-request)
4. Refinery processes the MR and merges to main

## Wrong Workflow
- Using gh pr create
- Creating GitHub pull requests directly

## Why
- Refinery is our merge queue processor
- GitHub PRs bypass our workflow
- Beads MRs are the coordination mechanism


Test: Alpha to Beta

Sibling communication test


Witness session cycling and handoff

Add session cycling and handoff protocol to Witness CLAUDE.md template.

## Session Cycling Protocol

```markdown
## Session Cycling

Your context will fill over long swarms. Proactively cycle when:
- Running for many hours
- Losing track of which workers you've checked
- Responses getting slower
- About to start complex operation

### Handoff Protocol

1. **Capture current state**:
```bash
town list .           # Worker states
town all beads        # Pending verifications
town inbox            # Unprocessed messages
```

2. **Compose handoff note**:
```
[HANDOFF_TYPE]: witness_cycle
[TIMESTAMP]: <now>
[RIG]: <rig>

## Active Workers
<list workers and status>

## Pending Verifications
<workers signaled done but not verified>

## Recent Actions
<last 3-5 actions>

## Warnings/Notes
<anything next session should know>

## Next Steps
<what should happen next>
```

3. **Send handoff**:
```bash
town mail send <rig>/witness -s "Session Handoff" -m "<note>"
```

4. **Exit cleanly**: End session, daemon spawns fresh one.

### On Fresh Session Start

1. Check for handoff: `town inbox | grep "Session Handoff"`
2. If found, read it and resume from handoff state
3. If not found, do full status check
```

## Implementation

Add to WITNESS_CLAUDE.md template.


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue (gt-test123) and understand the requirements.
Identify any blockers or missing information.


gt mail send should tmux-notify recipient

## Problem

When mail is sent via gt mail send, the recipient session does not get a tmux notification. In Python Gas Town (PGT), mail delivery triggers a tmux display-message or similar notification so the agent knows mail arrived.

## Expected Behavior

When gt mail send <addr> is called:
1. Mail is delivered to recipient inbox
2. If recipient has an active tmux session, send notification
3. Notification should be visible (display-message or bell)

## Current Behavior

Mail is delivered but no notification. Agent has to poll inbox to discover new mail.

## Impact

- Agents miss time-sensitive messages
- Heartbeat pokes from daemon will not wake agents
- Coordination is slower (polling vs push)

## Implementation Notes

After successful mail delivery, check if recipient has active session:
- gt session list can identify active sessions
- tmux display-message or send-keys can notify
- Could inject a visible prompt like "[MAIL] New message from <sender>"

## Reference

Check PGT implementation for how it handles this.


Step recovery: timeout and release

Implement recovery mechanism for stuck molecule steps.

## Problem
When a worker dies mid-step, the step stays in_progress forever.
Need timeout/release mechanism for nondeterministic idempotence.

## Solution
1. Track step start time (claimed_at timestamp)
2. Timeout: After 30 min in_progress, step returns to pending
3. Manual release: bd release <step-id>

## Implementation Options

### Option A: Beads-level timeout
- Add claimed_at field to issues
- bd ready excludes items in_progress < 30 min
- bd ready includes items in_progress > 30 min (auto-recovery)

### Option B: Daemon-level timeout
- Daemon watches in_progress items
- Moves back to pending after timeout

### Option C: Manual only (MVP)
- bd release <id> manually moves in_progress → pending
- Document recovery procedure
- Witness can automate for polecats

## Recommendation
Start with Option C (manual) for Christmas. Add Option A later.

## Acceptance
- [ ] bd release command works
- [ ] Stuck steps can be recovered
- [ ] Documented recovery procedure


Merge: gt-ih0s

branch: polecat/capable
target: main
source_issue: gt-ih0s
rig: gastown


Remove gt mail dependency on bd mail commands

Replaced bd mail send/inbox/read/ack with bd create/list/show/close. Messages are now stored as beads issues with type=message.


mol-polecat-work

Full polecat lifecycle from assignment to decommission.

This proto enables nondeterministic idempotence for polecat work.
A polecat that crashes after any step can restart, read its molecule state,
and continue from the last completed step. No work is lost.

Variables:
- {{issue}} - The source issue ID being worked on


gt crew add: Create crew workspace

Implement 'gt crew add <name> [--rig <rig>]' command:
- Clone repo into <rig>/crew/<name>/
- Create feature branch (optional, or stay on main)
- Register for mail delivery
- Initialize CLAUDE.md with crew worker prompting
- Do NOT register with witness (user-managed)


Test

Body


Crew workers getting wrong CLAUDE.md (shows Refinery)

## Problem

Crew workers (emma, dave) have CLAUDE.md that says they're the Refinery.

## Evidence

```
$ head -5 /Users/stevey/gt/beads/crew/emma/CLAUDE.md
# Claude: Beads Refinery
You are the **Refinery** for the **beads** rig...
```

## Expected

Should use crew.md.tmpl which correctly says:
```
# Crew Worker Context
You are a **crew worker** - the overseer's (human's) personal workspace...
```

## Impact

- Crew workers have wrong identity in static context
- `gt prime` correctly outputs crew context, but CLAUDE.md conflicts
- Confusing role information

## Fix

Check `gt crew create` or whatever populates CLAUDE.md for crew workers.


gt spawn/crew setup should create .beads/redirect for worktrees

Crew clones and polecats need a .beads/redirect file pointing to the shared beads database (../../mayor/rig/.beads). Currently:

- redirect files can get deleted by git clean
- not auto-created during gt spawn or worktree setup
- missing redirects cause 'no beads database found' errors

Found missing in: gastown/joe, beads/zoey (after git clean)

Fix options:
1. gt spawn creates redirect during worktree setup
2. gt prime regenerates missing redirects
3. bd commands auto-detect worktree and find shared beads

This should be standard Gas Town rig configuration.


Plugin: merge-oracle (merge queue analysis)

Example plugin that analyzes changesets before Refinery processes them. Builds overlap graph, classifies disjointness (parallel-safe vs needs-sequencing), uses LLM for semantic complexity, identifies high-risk patterns. Based on merge-orchestration proposal. See docs/architecture.md.


Mail CLI: archive, purge, search, mark

GGT mail CLI needs more commands for mail management.

## Commands to Add

### gt mail check
Check for new mail without full inbox display.
```
gt mail check [--quiet] [--inject]
```
- --quiet: Only output if new mail (for scripts)
- --inject: Send notification to running session

### gt mail mark
Change read status.
```
gt mail mark <id> --read
gt mail mark <id> --unread
```

### gt mail delete
Remove message from inbox.
```
gt mail delete <id> [--force]
```
- Confirm unless --force

### gt mail archive
Move old/read messages to archive.
```
gt mail archive [--older-than DAYS] [--all-read] [--dry-run]
```
- Creates inbox.jsonl.archive or separate archive.jsonl

### gt mail purge
Permanently delete archived messages.
```
gt mail purge [--older-than DAYS] [--dry-run] [--force]
```

### gt mail search
Find messages by content.
```
gt mail search <query> [--from SENDER] [--subject] [--body]
```

### gt mail reply
Reply to a message.
```
gt mail reply <id> -m BODY
```
- Auto-sets reply_to and thread_id
- Auto-addresses to original sender

## Files to Modify
- internal/cmd/mail.go: Add commands
- internal/mail/mailbox.go: Add Archive(), Search(), Delete()

## Acceptance Criteria
- [ ] All commands implemented
- [ ] Archive stores in separate file
- [ ] Search supports regex patterns
- [ ] Delete confirms by default


Merge: gt-g44u.2

branch: polecat/Doof
target: main
source_issue: gt-g44u.2
rig: gastown


BUG: gt done doesn't push branch to origin - work lost when worktree deleted

## Problem

`gt done` creates a merge-request record in beads but **never pushes the branch to origin**.

When polecats are cleaned up (worktrees deleted), the branch is lost forever. The MR record exists but there's no actual branch to merge.

## Evidence

12 MQ items had `ready` status but no corresponding branches on origin. All polecat worktrees were deleted, losing all work.

## Impact

**CRITICAL**: All polecat work is silently lost unless polecats manually push (which they don't know to do).

## Fix

In `done.go`, before creating the MR:
1. `git push origin <branch>` to push the branch to remote
2. Only create MR record if push succeeds

## Location
`mayor/rig/internal/cmd/done.go:124-135`


gt spawn should auto-start refinery/witness if not running

When spawning a polecat, the infrastructure (refinery, witness) should already be running.

## Current Behavior
spawn.go only:1. Assigns issue to polecat2. Sends work mail3. Starts polecat session

The refinery and witness must be started separately.

## Expected Behavior (per user feedback)
When spawning a polecat, if the rig's refinery or witness is not running, auto-start them.

## Options

### Option A: spawn auto-starts infrastructure
Check if refinery/witness running before spawn, start if not.

### Option B: gt swarm start <rig> command
Explicit command that:
1. Starts refinery
2. Starts witness
3. Optionally spawns polecats on bd ready issues

### Option C: gt rig start <rig>
Similar to Option B but as rig lifecycle command.

## Related
- gt-n7z7: refinery --foreground race condition bug
- gt-u1j.18: witness CLI commands


Polecats should not bd sync on startup

Polecats all share the same beads database at the rig level. The refinery and mayor/witness manage syncing beads.

## Current Behavior
Polecat startup runs bd sync, causing:
- Contention when multiple polecats spawn simultaneously
- Unnecessary sync operations
- Potential race conditions

## Desired Behavior
- Polecats should NOT run bd sync on startup
- They read from the shared beads database
- Only refinery/witness/mayor sync beads

## Implementation
Remove bd sync from polecat spawn/startup sequence.


Crew directory structure and config

Add crew/ directory support to rig structure. Include:
- crew/ as peer to polecats/, refinery/, witness/
- Crew worker subdirectories with full git clones
- Optional BEADS_DIR configuration for beads integration
- Crew state tracking (separate from polecat state)


GGT Command Parity: Complete gt command coverage

Complete gt command set to match/exceed PGT town commands.

Covers: uninstall, rig info, refinery attach, witness, session mgmt, mail UX, daemon.


Patrols: Cyclic molecules for autonomous maintenance

## Vision

Patrols are **cyclic molecules** - workflow loops that give Gas Town its autonomous nervous system. While regular molecules are DAGs that terminate, patrols loop forever, performing maintenance tasks at varying cadences.

This is the "steam engine" of Gas Town: converting episodic Claude sessions into continuous autonomous operation.

## Core Concepts

### 1. Cyclic Molecules

Regular molecule:     A -> B -> C -> done
Patrol molecule:      A -> B -> C --+
                      ^             |
                      +-------------+

Patrols have a loop_to field specifying where to restart.

### 2. Cooldown-Aware Steps (Atoms)

Steps encode their own cadence. When patrol reaches a step:
1. Check: now - last_run > cooldown?
2. If yes: execute, update last_run
3. If no: skip (immediately close)

The patrol runner is simple - steps self-skip. Complexity distributed into atoms.

### 3. The Beacon

The heartbeat that fires patrol triggers:
- Internal ticker in Deacon (goroutine)
- Or external cron firing gt deacon tick
- Or mail-based triggers

Without beacon, nothing proactive happens.

### 4. Session Reset as Patrol Step

Connects to auto-handoff (gt-bcwn). Session reset is a patrol step, not a separate mechanism.

### 5. Multi-Role Patrols

Each supervisor has its own patrol:

**Deacon patrol:** health-check (30s), session-gc (5m), beacon-tick (10s)
**Witness patrol:** orphan-scan (10m), stuck-check (2m), molecule-progress (1m)
**Refinery patrol:** queue-check (30s), pr-status (1m), merge-ready (30s)

### 6. Cadence Tiers

- Critical (10-30s): Health checks
- Active (1-5m): Progress, nudges
- Maintenance (10-30m): Orphans, GC
- Periodic (1h+): Reports

### 7. Best-Effort Scheduling

Not real-time - more like cron. No hard deadlines. Catch-up, dont pile-up.
Priority preemption (mail interrupts patrol). Graceful degradation under load.

## Open Questions

1. State persistence: Beads (self-describing) or file (faster)?
2. Interruption: How does urgent mail preempt patrol?
3. Error recovery: Backoff? Escalate? Circuit breaker?
4. Coordination: Can patrols send mail to trigger other patrols?

## Related

- gt-bcwn: Auto-handoff (session reset is a patrol step)
- Molecule system (patrols extend molecules with loops)
- Deacon lifecycle management

## Metaphor

Claude was fire. Claude Code was steam. Gas Town is the steam engine. Beads is the train tracks.

The steam engine converts episodic combustion into continuous rotary motion.
Gas Town converts episodic Claude sessions into continuous autonomous work.


Town root .beads has schema mismatch with bd

The .beads directory at town root (/Users/stevey/gt/.beads) has an incompatible schema:

```
Error: failed to open database: failed to initialize schema: sqlite3: SQL logic error: no such column: thread_id
```

Meanwhile, gastown/.beads (symlinked to mayor/rig/.beads) works fine.

## Impact

- gt mail inbox fails at town root
- gt handoff sends mail to broken db
- Daemon can't check its inbox

## Options

1. Delete town root .beads/beads.db and let it recreate
2. Symlink town root .beads to gastown/.beads
3. Run schema migration on existing db

## Root Cause

Likely a beads version upgrade that added thread_id column, but the town root db was created before that.


Merge: gt-g44u.3

branch: polecat/Ace
target: main
source_issue: gt-g44u.3
rig: gastown


context-check

Assess own context usage. If high, prepare for handoff.


Use cmd.OutOrStdout instead of fmt.Print in refinery

refinery/manager.go and refinery/engineer.go use fmt.Print/Println directly for user output (30+ occurrences). This breaks testability and doesn't follow cobra best practices. Should use cmd.OutOrStdout() or pass an io.Writer.

Affected files:
- internal/refinery/manager.go (lines 222, 360-361, 369, 387-393, 519, 537, 672)
- internal/refinery/engineer.go (lines 190-211, 249, 294-297, 325-353, 362-366)


Merge queue: per-rig queue management

Per-rig merge queue for coordinating polecat work.

## Concept

When polecats complete work, they submit to the merge queue. The Refinery processes the queue, merging work to main in order.

## Data Model

```go
type MergeRequest struct {
    ID        string    `json:"id"`
    Polecat   string    `json:"polecat"`
    Branch    string    `json:"branch"`
    Issue     string    `json:"issue,omitempty"`
    Status    MRStatus  `json:"status"`
    CreatedAt time.Time `json:"created_at"`
    UpdatedAt time.Time `json:"updated_at"`
}

type MRStatus string
const (
    MRPending   MRStatus = "pending"
    MRReviewing MRStatus = "reviewing"
    MRMerged    MRStatus = "merged"
    MRRejected  MRStatus = "rejected"
)
```

## Interface

```go
type MergeQueue struct {
    rig  *Rig
    path string  // <rig>/refinery/queue.jsonl
}

func NewMergeQueue(rig *Rig) *MergeQueue

// Queue operations
func (mq *MergeQueue) Submit(polecat, branch string, issue string) (*MergeRequest, error)
func (mq *MergeQueue) List() ([]*MergeRequest, error)
func (mq *MergeQueue) Next() (*MergeRequest, error)  // oldest pending
func (mq *MergeQueue) Get(id string) (*MergeRequest, error)

// Status updates
func (mq *MergeQueue) SetStatus(id string, status MRStatus) error
func (mq *MergeQueue) MarkMerged(id string) error
func (mq *MergeQueue) MarkRejected(id, reason string) error
```

## Queue Storage

JSONL file at `<rig>/refinery/queue.jsonl`. FIFO ordering.

## Git Coordination

Refinery processes queue:
1. Fetch polecat branch
2. Attempt merge to main
3. Run tests (if configured)
4. Push to origin
5. Update queue status

## Conflict Handling

If merge fails:
- Mark MR as rejected
- Notify polecat to rebase


Design: Polecat Beads write access

Design for granting polecats direct beads write access.

## Background

With Beads v0.30.0 tombstone-based rearchitecture, we have solid multi-agent support. Reversing the original read-only decision.

## Benefits

- Simplifies architecture (no mail-based issue filing proxy)
- Empowers polecats to file discovered work
- Beads handles work-disavowal

## Complications

For OSS projects where you cannot commit to project .beads/, need per-rig beads repo configuration.

## Subtasks (implementation)

- gt-zx3: Per-rig beads configuration schema
- gt-e1y: Worker prompting updates for beads access
- gt-cjb: Witness proxy removal
- gt-082: Beads sync in decommission checklist

**Design complete.** Each subtask has full specification in its description.


Phase 1.3: gt doctor checks for ephemeral health

Add doctor checks for ephemeral beads repo.

## Checks

1. **ephemeral-exists**: .beads-ephemeral/ directory exists for each rig
2. **ephemeral-git**: It's a valid git repo
3. **ephemeral-orphans**: Molecules started but never squashed (>24h old)
4. **ephemeral-size**: Warn if ephemeral repo is >100MB (should be cleaned)
5. **ephemeral-stale**: Molecules with no activity in last hour

## Auto-fix

--fix can:
- Create missing ephemeral repo
- Clean up old completed molecules (already squashed)
- NOT auto-squash incomplete molecules (needs AI summary)


detectSender() doesn't recognize crew workers

## Problem

detectSender() in internal/cmd/mail.go only checks for /polecats/ directories. Crew workers in /crew/<name>/ fall through to the default 'mayor/', so:
- gt mail inbox shows mayor's inbox instead of the crew worker's
- gt mail send sets the wrong From address

## Fix

Add crew worker detection before the /polecats/ check:

if strings.Contains(cwd, "/crew/") {
    parts := strings.Split(cwd, "/crew/")
    ...
    return fmt.Sprintf("%s/crew/%s", rigName, crewMember)
}

## Affected
- Any crew worker running gt mail inbox without explicit address
- Crew worker handoffs (wrong sender)


Digest: mol-deacon-patrol

Old test patrol cycle - cleanup


Document the Propulsion Principle

Write canonical documentation for the Universal Gas Town Propulsion Principle.

Location: gastown/mayor/rig/docs/propulsion-principle.md

Content:
- The One Rule (hook has work → work happens)
- Why it works (stateless agents, molecule-driven)
- The sling lifecycle diagram
- Agent startup protocol
- Examples and anti-patterns

This is foundational theory-of-operation documentation.


Witness Patrol Molecule

Create mol-witness-patrol molecule for witness heartbeat loop.

Similar to DeaconPatrolMolecule but for per-rig witness duties.

## Steps
1. inbox-check - Process witness mail
2. survey-workers - List polecats, check status
3. inspect-workers - Capture pane output, assess state
4. plugin-run - Execute plugins from <rig>/plugins/witness/
5. decide-actions - Determine nudges, escalations
6. execute-actions - Send nudges, process shutdowns
7. context-check - Check own context, handoff if needed
8. loop-or-exit - Continue or cycle

The plugin-run step enables user customization of the patrol loop.


mol-deacon-patrol

Deacon patrol molecule template. Label: template


Work on ga-y6b: Implement Refinery as Claude agent. Conve...

Work on ga-y6b: Implement Refinery as Claude agent. Convert from shell to Claude agent that processes MRs in merge queue, runs tests, merges to integration branch. When done, submit MR (not PR) to integration branch for Refinery.


Witness MVP: Automated Polecat Lifecycle

Implement the Witness agent - per-rig 'pit boss' that manages polecat lifecycles.

The Witness enables hands-free swarming by automating:
- Spawning polecats for ready work
- Monitoring worker health
- Processing shutdown requests
- Cleaning up worktrees when done
- Escalating stuck workers to Mayor

Without Witness, humans must manually spawn, monitor, and kill each polecat.

## Core Loop

```
while True:
  # Handle pending shutdowns
  for polecat in polecats where state == pending_shutdown:
    verify git clean
    kill session
    remove worktree
    delete branch

  # Spawn for ready work
  ready = bd ready --parent=<epic> if epic else bd ready
  for issue in ready:
    if active_workers < max_workers:
      gt spawn --issue <id>

  # Check worker health
  for polecat in active polecats:
    if stuck (no progress for 30 min):
      nudge or escalate

  sleep 60
```

## Blocking Bugs to Fix
- gt-dsfi: handoff deadlock
- gt-n7z7: refinery foreground race condition
- gm-c6b: mail coordination (town vs rig beads)


Add bulk session stop command (gt session stop --all)

When decommissioning a rig, need to stop multiple sessions one at a time. A --all or --rig flag would allow: gt session stop --rig gastown


Merge: gt-3x0z.4

branch: polecat/rictus
target: main
source_issue: gt-3x0z.4
rig: gastown


TIDY UP: Your previous work (patrol runner) was already m...

TIDY UP: Your previous work (patrol runner) was already merged to main. Check your git status is clean, sync beads, and if nothing to do, just run 'gt done'.


Auto-rebase on conflict: optional automatic rebase

Implement automatic rebase as conflict resolution option.

When on_conflict=auto_rebase and conflicts detected:
1. Attempt: git rebase <target> <source-branch>
2. If clean rebase: update source branch, continue merge
3. If conflicts in rebase: abort, fall back to assign_back
4. Force push rebased branch (worker's branch)

Requires:
- Worker branch must be force-pushable
- Config: on_conflict: auto_rebase

Risks:
- Force push can confuse workers
- Complex conflicts still need manual resolution

Reference: docs/merge-queue-design.md#conflict-resolution-strategies


Outpost/Worker interfaces: Core abstractions for remote compute

## Overview

Define the core interfaces that all outpost types implement.

## Interfaces

```go
type OutpostType string
const (
    OutpostLocal    OutpostType = "local"
    OutpostSSH      OutpostType = "ssh"
    OutpostCloudRun OutpostType = "cloudrun"
)

type Outpost interface {
    Name() string
    Type() OutpostType
    MaxWorkers() int
    ActiveWorkers() int
    Spawn(issue string, config WorkerConfig) (Worker, error)
    Workers() []Worker
    Ping() error
    SendMail(worker string, msg Message) error  // optional
}

type Worker interface {
    ID() string
    Outpost() string
    Status() WorkerStatus  // idle, working, done, failed
    Issue() string
    Attach() error         // for interactive outposts
    Logs() (io.Reader, error)
    Stop() error
}

type WorkerConfig struct {
    RigPath    string
    BeadsDir   string
    GitBranch  string
    Context    map[string]string  // hints for worker
}
```

## Files

- `internal/outpost/outpost.go` - Outpost interface
- `internal/outpost/worker.go` - Worker interface
- `internal/outpost/config.go` - WorkerConfig, OutpostType

## Notes

This is the foundation for all federation work. Keep interfaces minimal - we can extend later.


Phase 1.1: gt rig init creates .beads-ephemeral/

Add ephemeral beads repo creation to rig initialization.

## Implementation

In `gt rig init` (or equivalent setup):
1. Create `<rig>/.beads-ephemeral/` directory
2. Initialize as git repo
3. Create minimal beads config (no sync-branch needed)
4. Add to .gitignore if not already

## Config

```yaml
# .beads-ephemeral/config.yaml
ephemeral: true
# No sync-branch - ephemeral is local only
```

## Verification

```bash
gt rig init gastown
ls gastown/.beads-ephemeral/  # Should exist
```


Split PGT/GGT harness or migrate to GGT-only

Current ~/ai harness is shared by PGT and GGT with confusing overlap. Options:
1. Keep separate (document the coexistence)
2. Migrate fully to GGT structure
3. Create separate harnesses

This affects the beads redirect, Mayor home location, and rig structure.


Daemon: integration test with real lifecycle

Need an end-to-end test that:
1. Starts daemon
2. Starts a test agent session
3. Sends lifecycle request to daemon
4. Verifies session was killed and restarted
5. Cleans up

Could use a mock 'agent' that's just a shell script.


Phase 1.1: Attachment field on pinned beads

Add attached_molecule field to pinned bead schema.

## Schema Change
Add to handoff/pinned bead issues:
- attached_molecule: string (root issue ID of attached mol)
- attached_at: timestamp

## Implementation
- Update beads Issue struct if needed
- Or: use labels/metadata field
- Ensure bd show displays attachment info

## Acceptance
- Can set/clear attachment on a bead
- bd show displays attachment status


Add gt decommission command for clean swarm/worker shutdown

Single command to cleanly shut down a swarm and its workers: cancel swarm, stop sessions, optionally remove polecats. E.g. gt decommission gt-hw6 --cleanup


Test from Mayor

This is a test message via GGT mail


Document merge queue architecture

Update docs/architecture.md with:

- Merge Queue section explaining Beads-native approach
- Engineer role (renamed from Refinery)
- Session restart protocol
- gt mq command reference
- Federation considerations for queue

Also update any references to .gastown/ → config/.


Polecats should not push branches to remote

## Current Behavior

Polecats push their branches to origin (e.g., `polecat/furiosa`), which pollutes the remote with many short-lived branches.

## Desired Behavior

Polecats should only commit locally. The Refinery handles all remote pushes:
1. Polecat works on local `polecat/<name>` branch
2. Polecat signals done (state → idle)
3. Refinery pulls from local polecat branch
4. Refinery runs tests, merges to main
5. Refinery pushes main to remote
6. If PR review needed, Refinery creates the PR

## Benefits

- Clean remote (no branch pollution)
- Clear responsibility (Refinery is the quality gate)
- Simpler cleanup (local branches deleted with worktree)
- Less noise in GitHub UI

## Trade-offs

- If polecat crashes before Refinery merges, code is lost locally
- But beads issue remains open, another polecat can redo the work
- This is acceptable for ephemeral workers

## Implementation

In polecat CLAUDE.md or landing protocol:
- Remove `git push origin HEAD` from workflow
- Replace with just `git commit` + signal done
- Refinery handles the rest


Merge: gt-5af.1

branch: polecat/Ace
target: main
source_issue: gt-5af.1
rig: gastown


Work on gt-ogr: Fix rig count in tmux status bar. The cou...

Work on gt-ogr: Fix rig count in tmux status bar. The count is showing wrong. Run 'bd show gt-ogr' for details.


Update config location: .gastown/ → config/

Move rig configuration from hidden .gastown/ to visible config/:
- config/rig.json: Rig configuration
- config/engineer.json: Engineer settings (test command, etc.)
- config/witness.json: Witness settings (heartbeat interval, etc.)

Hidden directories are poorly discovered by AI agents.


Recreate beads rigs with fresh clones

## Problem

Beads rigs have schema mismatches (missing thread_id column, etc.) from development iteration.

## Tasks

1. Shut down any active polecats
2. Delete existing beads rigs: mayor/rig, refinery/rig, witness/rig, crew/*
3. Re-clone from beads repo
4. Run bd init in each new clone

## Rigs to recreate

- /Users/stevey/gt/beads/mayor/rig
- /Users/stevey/gt/beads/refinery/rig
- /Users/stevey/gt/beads/crew/* (if any)

## Source

Clone from beads repo (need to confirm remote URL)


GGT vs PGT Gap Analysis Summary

Summary of gaps comparing GGT (~4,500 LOC) to PGT (~27,700 LOC).

## Critical Gaps (P1) - Existing Issues
- gt-u1j.17: Polecat CLI (add, list, wake, sleep) - DETAILED
- gt-u1j.16: Rig CLI (add, list, show, remove) - DETAILED
- gt-u1j.18: Witness CLI (start, stop, status) - DETAILED
- gt-f9x.4: Doctor framework - DETAILED
- gt-f9x.5: Workspace doctor checks - DETAILED
- gt-f9x.6: Rig doctor checks - DETAILED

## Critical Gaps (P1) - New Issues
- gt-a95: Refinery background daemon mode - ENHANCED
- gt-hgk: Mail message types and threading - ENHANCED

## Significant Gaps (P2) - New Issues
- gt-d46: Mail CLI archive/purge/search - ENHANCED
- gt-e9k: Swarm preflight/postflight - ENHANCED
- gt-662: Swarm report generation - ENHANCED
- gt-69l: Hook system - ENHANCED
- gt-3yj: Agent monitoring - ENHANCED
- gt-1ky: Workspace CLI (may overlap f9x.3) - ENHANCED
- gt-9j9: Worker status reporting - ENHANCED
- gt-qao: Mayor CLI - ENHANCED
- gt-7o7: Session pre-shutdown checks - ENHANCED
- gt-c92: Batch all command - ENHANCED
- gt-lno: Swarm state persistence - ENHANCED
- gt-a9y: File locking - ENHANCED
- gt-30o: Error handling improvements - ENHANCED

## Significant Gaps (P2) - Existing Issues
- gt-kmn.12: Ephemeral rig support - DETAILED

## Lower Priority (P3) - New Issues
- gt-3fm: Mail orchestrator daemon - ENHANCED
- gt-2kz: Cleanup commands - ENHANCED
- gt-ebl: Names commands - ENHANCED
- gt-1u9: Interactive prompts - ENHANCED
- gt-8lz: Help text improvements - ENHANCED

## Closed as Duplicates
- gt-3tz → gt-u1j.17 (polecat CLI)
- gt-e1r → gt-u1j.16 (rig CLI)
- gt-86w → gt-f9x.4/5/6 (doctor)
- gt-alx → gt-kmn.12 (ephemeral rigs)

## Execution Order Recommendation
1. P1 CLI commands (existing detailed issues ready to implement)
2. gt-a95: Refinery daemon (blocks autonomous operation)
3. gt-7o7: Pre-shutdown checks (prevents data loss)
4. gt-a9y: File locking (prevents corruption)
5. gt-hgk + gt-d46: Mail improvements
6. gt-69l: Hook system (enables extensibility)
7. Remaining P2s in any order
8. P3s as time permits


Silent error handling with _ = err patterns

Multiple locations intentionally ignore errors with comments like 'Ignore errors'. While some are valid (best-effort operations), others should be audited:

- witness/manager.go:542 - Ignores cmd.Run() error
- refinery/manager.go:411, 438, 509 - Ignores loadState and git pull errors
- swarm/manager.go:47 - Ignores getGitHead error
- polecat/manager.go:69, 284 - Ignores pool.Load and DeleteBranch errors
- swarm/integration.go:101, 137 - Ignores git pull and push errors

Each should be evaluated: log it, handle it, or confirm ignoring is intentional.


Connection interface: Protocol for local/remote ops

Abstract interface for local vs remote (SSH) operations.

## Concept

Enable Gas Town to manage rigs on remote machines via SSH. The Connection interface abstracts whether operations happen locally or remotely.

## Interface

```go
type Connection interface {
    // Identification
    Name() string
    IsLocal() bool

    // File operations
    ReadFile(path string) ([]byte, error)
    WriteFile(path string, data []byte, perm os.FileMode) error
    MkdirAll(path string, perm os.FileMode) error
    Remove(path string) error
    Stat(path string) (os.FileInfo, error)
    Glob(pattern string) ([]string, error)

    // Command execution
    Exec(cmd string, args ...string) ([]byte, error)
    ExecDir(dir, cmd string, args ...string) ([]byte, error)

    // Tmux (for session management)
    TmuxNewSession(name, dir string) error
    TmuxKillSession(name string) error
    TmuxSendKeys(session, keys string) error
    TmuxCapturePane(session string, lines int) (string, error)
}
```

## Implementations

- LocalConnection (gt-f9x.8): Direct file/exec operations
- SSHConnection (future): Operations via SSH

## Usage

```go
func NewRigManager(conn Connection, ...) *RigManager

// Operations work the same regardless of connection type
rm.DiscoverRigs()  // uses conn.Glob, conn.ReadFile
```

## Design Notes

- Connection obtained from MachineRegistry (gt-f9x.9)
- Default is always local
- SSH connection requires machine config (host, key, user)


Direct landing integration: gt land uses MR or bypasses

Integrate direct landing with merge queue.

'gt land --direct' should:
1. Check if MR exists for the polecat's work
2. If MR exists: process it directly (skip queue)
3. If no MR: create temporary MR, process, close

Options:
- --direct: bypass queue (existing)
- --via-queue: ensure goes through queue (new)
- --force: skip safety checks (existing)

This ensures direct landing still creates proper records.

Reference: docs/merge-queue-design.md#direct-landing-bypass-queue


TIDY UP: Your previous work (gt-odvf: bd mol CLI docs) wa...

TIDY UP: Your previous work (gt-odvf: bd mol CLI docs) was already merged to main. Check your git status is clean, sync beads, and if nothing to do, just run 'gt done'.


Layered context onboarding pattern

Pattern from handoff discussion:

## Pattern: Layered Context Onboarding

Town CLAUDE.md (user/org) -> Rig CLAUDE.md (project) -> Role priming

## Ultra-compressed HOP for workers (no reveal)

- Permanent record: All work tracked. Outcomes matter.
- Quality gates: Molecule steps exist for a reason.
- Attribution: Completions build your track record.
- Handoff clean: Leave state any worker can continue.

## Recommendation

Create Town @AGENTS.md for shared worker context that all workers see.
This provides common behavioral guidance without revealing full HOP context.


Digest: mol-deacon-patrol

Test patrol cycle - first run, no actual work done


Cross-project dependency workflow (Gas Town side)

Gas Town integration for cross-project dependencies.

## Components
- gt-zniu: gt park command (park molecule on external dep)
- gt-in3x: gt spawn --continue (resume parked molecule)
- gt-5uf3: Patrol auto-resume (future)

## Design Doc
See: docs/cross-project-deps.md

## Depends on Beads
- bd-h807: Cross-project dependency support (epic)

## Launch Plan
Phase 1 (launch): gt park + gt spawn --continue (manual resume)
Phase 2 (later): Patrol auto-resume


CLI: gt stop --all (emergency swarm kill)

Emergency kill command for swarm operations.

## Commands

```bash
gt stop --all              # Kill ALL sessions across all rigs
gt stop --rig <name>       # Kill all sessions in one rig
gt stop --rig <name> --graceful  # Try graceful first, then force
```

## Implementation

### --all flag
1. List all tmux sessions matching gt-*
2. For each: capture final output, kill session
3. Update all polecat states to idle
4. Log all killed sessions
5. Send mail to Mayor: "Emergency stop executed"

### --rig flag
1. List sessions for specific rig
2. Same as above but scoped

### --graceful flag
1. First, try to inject "exit" command
2. Wait 5 seconds
3. If still running, force kill

## Output

```
Stopping all Gas Town sessions...
  [wyvern] Toast: captured output, killed
  [wyvern] Capable: captured output, killed
  [beads] Nux: captured output, killed

3 sessions stopped.
All polecat states set to 'idle'.
Mail sent to mayor/.
```

## Safety

- Always capture output before killing
- Update state files to reflect reality
- Log all operations to gt.log
- Warn if uncommitted changes detected (but still kill)

## Dependencies

Needs: Tmux wrapper, Session management, Polecat management


bd ready --blockers: prioritize issues that block other work

bd ready should prioritize issues that are blocking other work.

**From VC**: Blocker-first prioritization in GetReadyWork(). ~100 lines.
Algorithm: baseline-failure first, then discovered:blocker, then by priority.

**Gas Town implementation**: CLI flag or default behavior:
```bash
bd ready --blockers-first  # Or make this default
```

Checks dependency graph. Issues with many dependents surface first.

**Value**: Unblocks parallelism faster. Critical path gets cleared.

**VC lesson**: Without blocker priority, work can starve on discovered issues.


Add role-specific subcommands that delegate to core commands (agent UX)

## Problem

Agents naturally guess command patterns like:
- `gt witness nudge <polecat>`
- `gt polecat nudge <name>`
- `gt crew restart <member>`

But these don't exist - the actual commands are:
- `gt nudge <session> <message>`
- `gt polecat reset <name>`

This creates friction in agent UX. Agents shouldn't have to memorize the 'correct' command structure.

## Proposal

Add subcommands to each role that delegate to core commands with argument reordering:

```
gt witness nudge furiosa "Start working"
  → gt nudge gt-gastown-furiosa "Start working"

gt polecat nudge gastown/furiosa "Check mail"
  → gt nudge gt-gastown-furiosa "Check mail"

gt crew nudge gastown/max "Wake up"
  → gt nudge gt-crew-gastown-max "Wake up"
```

## Benefits

1. **Discoverable**: Agents explore `gt witness --help` and find nudge
2. **Lenient**: Multiple valid ways to express the same intent
3. **Role-contextual**: Commands under the role namespace feel natural
4. **Extensible**: Pattern works for future subcommands (status, reset, etc.)

## Implementation

Each role command (witness, polecat, crew, refinery) gets thin wrapper subcommands:

```go
// In witness.go
witnessCmd.AddCommand(&cobra.Command{
    Use:   "nudge <polecat> <message>",
    Short: "Nudge a polecat (delegates to gt nudge)",
    RunE: func(cmd *cobra.Command, args []string) error {
        session := formatSession(rig, args[0])
        return runNudge(session, args[1])
    },
})
```

## Future Candidates

Other subcommands to add as role-specific aliases:
- `gt polecat status <name>` (already exists, good pattern)
- `gt witness check <polecat>` → trigger a manual check
- `gt refinery merge <mr-id>` → process specific MR
- `gt crew send <member> <message>` → mail to crew member


Work assignment messages should auto-close on completion

When a polecat completes work on an issue, the work assignment message (msg-type:task) stays open. Found 7 stale work assignments in gastown after swarm completed.

Proposal: When bd close is called on an issue, auto-close any work assignment messages that reference that issue in their body.

Alternative: Work assignment messages could use a different lifecycle - perhaps they should be acked (closed) when the polecat starts working, not when they finish.


Witness patrol: cleanup idle orphan polecats

Add patrol step to find and cleanup polecats that are idle with no assigned issue. These orphans occur when polecats crash before sending DONE or Witness misses the message. Patrol should verify git is clean before removing worktree. Part of gt-rana.


Test: New Router

Testing bd create for mail


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


Patrol System: Agent lifecycle loops with attachments

Enable Gas Town agents to run continuous patrols, survive crashes, and hand off work across sessions.

## Core Concepts
- **Attachments**: Molecules bound to agent's pinned bead until complete
- **Patrols**: Cyclic molecules that loop (deacon, witness, refinery)
- **Quiescent**: Agents that sleep until triggered (witness, refinery)

## Design Doc
See docs/patrol-system-design.md

## Phases
Phase 1: Foundation (attachment field, daemon detection, mol-deacon-patrol)
Phase 2: Quiescent Agents (wake triggers, witness/refinery patrols)
Phase 3: Callbacks and Plugins (mail protocol, plugin runner)
Phase 4: Polish (gt patrol status, metrics, tuning)

## Key Decisions
- Attachment as field on pinned bead (not edge type, for now)
- Mail-based orchestration for all callbacks
- Queue replacement for heartbeat delivery (not pile-up)
- Burn and respawn for patrol loops (not in-place reset)


verify-tests

Run existing tests. Add new tests for new functionality.
Ensure adequate coverage.

go test ./...

Fix any test failures before proceeding.

Depends: implement


MR field parsing: extract structured fields from description

Parse merge-request beads to extract structured fields:
- branch: source branch name
- target: target branch (main or integration/xxx)
- source_issue: the work item being merged
- worker: who did the work
- rig: which rig
- merge_commit: (set on close)
- close_reason: (set on close)

Fields stored in description as YAML block or key: value lines.
Provide helper functions: ParseMRFields(issue) and SetMRFields(issue, fields).

Reference: docs/merge-queue-design.md#merge-request-schema


gt refinery start: doesn't actually start a session

## Problem

`gt refinery start gastown` reports success but doesn't start a tmux session.

## Evidence

```
$ gt refinery start gastown
Starting refinery for gastown...
✓ Refinery started for gastown

$ tmux list-sessions | grep refinery
(nothing)

$ gt refinery status gastown
State: ○ stopped
```

## Expected

Should start a tmux session (e.g., gt-gastown-refinery) with Claude processing the merge queue.

## Related

- gt-kcee: Witness commands also need implementation
- The refinery 'start' may just be updating state.json without spawning a session


Merge: gt-a95

branch: polecat/Ace
target: main
source_issue: gt-a95
rig: gastown


Per-epic config overrides: custom merge settings

Allow per-epic merge configuration overrides.

Epic can specify merge_config in its description:
  merge_config:
    run_tests: true
    test_command: 'go test -race ./...'
    on_conflict: assign_back

When processing MRs for an epic:
1. Load rig-level merge_queue config
2. Check if epic has merge_config
3. Merge epic config over rig config
4. Use merged config for processing

Use cases:
- Risky refactors: more thorough testing
- Urgent fixes: skip some checks
- Experimental work: different test suite

Reference: docs/merge-queue-design.md#per-epic-overrides


Implement shared beads architecture for rig

Implement redirect-based shared beads to eliminate git sync overhead within a rig.

## Background
Each polecat currently has its own .beads/ directory synced via git. This burns tokens on sync operations.

## Solution
Use bd's redirect feature:
1. Create single shared .beads/ at rig root
2. Polecats get redirect files pointing to shared location
3. All agents connect to same daemon
4. SQLite WAL + daemon serialization handles concurrency

## Implementation
1. Create shared .beads/ at rig root (e.g., ~/gt/gastown/.beads/)
2. Update gt spawn to create redirect files:
   mkdir -p polecats/nux/.beads
   echo ../../.beads > polecats/nux/.beads/redirect
3. Test that all polecats connect to same daemon
4. Remove git sync from intra-rig workflow
5. Keep JSONL export for backup/cross-rig only

## Reference
beads/polecats/rictus/internal/beads/beads.go:45 - followRedirect()


Merge: gt-qna4

branch: polecat/capable
target: main
source_issue: gt-qna4
rig: gastown


File locking for concurrent access

Add file locking for concurrent access safety.

## At-Risk Files
- .gastown/swarms.json (or per-swarm state.json)
- .gastown/refinery.json
- polecats/<name>/state.json
- inbox.jsonl files

## Go File Locking
Use syscall.Flock for advisory locking:
```go
type FileLock struct {
    file *os.File
}

func AcquireLock(path string, timeout time.Duration) (*FileLock, error) {
    f, err := os.OpenFile(path+".lock", os.O_CREATE|os.O_RDWR, 0644)
    if err != nil {
        return nil, err
    }
    // Use syscall.Flock with timeout
}

func (l *FileLock) Release() error
```

## Integration Pattern
```go
func (m *Manager) saveState(ref *Refinery) error {
    lock, err := AcquireLock(m.stateFile(), 5*time.Second)
    if err != nil {
        return fmt.Errorf("could not acquire lock: %w", err)
    }
    defer lock.Release()

    // Read-modify-write cycle
}
```

## New Package
internal/filelock/
├── lock.go     # FileLock, AcquireLock
└── lock_test.go

## Apply To
- internal/refinery/manager.go: loadState/saveState
- internal/cmd/swarm.go: SwarmStore
- internal/mail/mailbox.go: Append, rewrite
- internal/polecat/manager.go: state operations

## Timeout Handling
Default 5 second timeout. Return error if lock not acquired.

## Acceptance Criteria
- [ ] Lock files created (.lock extension)
- [ ] Timeout on lock contention
- [ ] All state files protected
- [ ] Locks released on error paths


Mayor restart loop: auto-prime and mail check on attach

When mayor session cycles (after /exit, gt mayor attach reconnects), the new session lacks context.

## Current Behavior
- Mayor exits, shell script loop restarts claude
- New session starts cold - no gt prime, no mail check
- Mayor is disoriented, doesn't know prior context
- Strong 'antimemetic properties' - we discuss fixing it, then forget

## Expected Behavior
After restart, mayor should automatically:
1. Run gt prime (load role context)
2. Check gt mail inbox (find handoff messages)
3. Look for 🤝 HANDOFF messages from predecessor

## Possible Fixes
1. Startup hook in Claude Code settings that runs gt prime
2. CLAUDE.md instructions that say 'FIRST THING: run gt prime'
3. Shell script wrapper that injects context before attach
4. Modify gt mayor attach to inject prime command

## Related
- gt-vci: Mayor handoff mail template
- gt-sye: Mayor startup protocol prompting


Merge fix/spawn-beads-path branch to main

Branch has gt nudge command; main has notification deduplication. Both valuable.

Key insight: Only ~10 commits diverged each way in mayor/rig.
- Branch: 9509afa feat(nudge): Add gt nudge command (MISSING from main)
- Main: d2fccd5 slot-based notification deduplication (KEEP)

Merge plan:
1. git merge fix/spawn-beads-path --no-ff
2. Keep nudge.go from branch
3. Keep notification.go from main
4. Merge tmux.go (both NudgeSession AND SendKeysReplace)
5. go build && go test
6. Deploy to ~/.local/bin/gt


Design molecule step hooks

Hooks that fire between molecule steps. When a bead in a molecule closes, trigger hook that can spawn agent attention to prompts/requests. This enables reactive orchestration - the molecule drives, hooks respond. Gas Town feature built on Beads data plane.


Phase 2.2: gt prime shows ephemeral molecule context

Update gt prime to detect and display ephemeral molecule state.

## Detection

1. Check for active ephemeral molecule assigned to current identity
2. Parse molecule progress (current step, total steps)
3. Show in prime output

## Output

```
🔧 Polecat furiosa, checking in.

📦 Molecule: mol-polecat-work (eph-abc123)
   Step 3/8: do-work
   Source: gt-rixa
   Started: 10 minutes ago

Run 'bd mol status' for full molecule state.
```


Create rig .runtime/ for rig runtime state

Move ephemeral rig state to .runtime/:
- Create <rig>/.runtime/ directory
- Move .gastown/witness.json → .runtime/witness.json
- Move .gastown/refinery.json → .runtime/refinery.json
- Move .gastown/namepool.json (state portion) → .runtime/namepool-state.json
- Update .gitignore to ignore .runtime/
- Update all code references


Add human escalation configuration

Add overseer contact config to mayor/town.json. Deacon uses this for escalation when it cannot resolve issues. Support email and/or other notification methods.


Add molecule to update local go binary on push to main

When pushing to main branch, automatically rebuild and install the gt binary on the local machine so changes are immediately available.


Molecule instantiation: create child beads from template

When instantiating a molecule on a work bead:

## Transaction Flow

1. Parse molecule's `## Step:` sections from description
2. Begin SQLite transaction
3. For each step, create child issue:
   - ID: `{parent-id}.{step-ref}` or generated
   - Title: step title (from header or first line)
   - Description: step prose instructions
   - Type: task
   - Priority: inherit from parent
4. Add `instantiated-from` edge from each step to molecule:
   ```sql
   INSERT INTO dependencies (issue_id, depends_on_id, type, metadata)
   VALUES (step_id, mol_id, 'instantiated-from', '{"step": "implement"}');
   ```
5. Wire inter-step dependencies from `Needs:` lines
6. Commit transaction (atomic - all or nothing)

## Parsing Conventions

```markdown
## Step: <ref>
<prose instructions>
Needs: <step>, <step>  # optional
Tier: haiku|sonnet|opus  # optional hint
```

## Parameterization

Steps can have `{{variable}}` placeholders:
```markdown
## Step: implement
Implement {{feature_name}} in {{target_file}}.
```

Context map provided at instantiation time.

## API

```go
func (s *Store) InstantiateMolecule(mol *Issue, parent *Issue, ctx map[string]string) ([]*Issue, error)
func ParseMoleculeSteps(description string) ([]MoleculeStep, error)
```

Implementation lives in `internal/beads/molecule.go`.


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue ({{issue}}) and understand the requirements.
Identify any blockers or missing information.


Rename .beads-ephemeral to .beads-wisps in docs

The wisp storage directory should be named `.beads-wisps/` not `.beads-ephemeral/`.

Also fix the architecture: Witness and Refinery share mayor/rig's beads and wisps.
They don't have separate ephemeral stores.

## Files to update
- docs/wisp-architecture.md
- docs/architecture.md
- ~/gt/docs/patrol-system-design.md
- ~/gt/CLAUDE.md

## Changes
1. Rename `.beads-ephemeral/` → `.beads-wisps/` everywhere
2. Remove incorrect references to witness/.beads-ephemeral/ and refinery/rig/.beads-ephemeral/
3. Clarify that all rig-level patrols use mayor/rig/.beads-wisps/


gt mail inbox doesn't find crew worker mail - identity mismatch

## Problem

Crew workers don't see their handoff messages when running `gt mail inbox` from their working directory.

## Root Cause

gt derives identity from cwd path, but crew workers have a different path structure:
- **cwd**: `/Users/stevey/gt/beads/crew/dave`
- **gt derives**: `beads/crew/dave` (wrong)
- **should be**: `beads/dave` (crew workers use `rig/name` format)

Messages sent to `beads/dave` don't show up because gt is looking for `beads/crew/dave`.

## Workaround

Use explicit identity flag:
```bash
gt mail inbox --identity "beads/dave"
```

## Fix

Identity detection in gt should handle crew/ subdirectory:
- Path `<rig>/crew/<name>` should derive identity as `<rig>/<name>`
- This matches how polecats work: `<rig>/polecats/<name>` → `<rig>/<name>`

## Affected

All crew workers in all rigs.


Direct test

Testing direct bd create


Configuration in Beads: use pinned beads for rig/agent config

## Summary

Move configuration from JSON files into Beads data plane using pinned beads.

## Motivation

- Config becomes versionable and syncable like issues
- Agents can read config via `bd show`
- Unified data model for everything
- Supports the 'Beads as Universal Data Plane' vision (gt-aqm)

## Config Types to Migrate

### Rig-level (pinned per rig)
- Theme/colors for tmux status line
- Default branch naming conventions
- Merge queue settings
- Witness thresholds

### Agent-level (pinned per role)
- Handoffs (already planned - gt-cu7r)
- Agent preferences
- Current focus/context

### Town-level (pinned at town root)
- Cross-rig settings
- Federation config
- Global themes

## Implementation

1. Implement StatusPinned (beads-6v2) ✓ in progress
2. Create config pinned beads on rig init
3. Add `bd config get/set` commands that read/write pinned beads
4. Migrate existing config.json fields

## Naming Convention

```
<prefix>-cfg-<scope>
gt-cfg-theme      # gastown theme
bd-cfg-merge      # beads merge settings
gm-cfg-town       # town-level config
```

## Dependencies

- beads-6v2: Add StatusPinned to beads schema
- gm-w13: Pinned Beads epic


Built-in molecules: engineer-in-box, quick-fix, research

Create built-in molecules as Beads issues:

## engineer-in-box

```markdown
id: mol-engineer-in-box
type: molecule
title: Engineer in a Box

Full workflow from design to merge.

## Step: design
Think carefully about architecture. Consider:
- Existing patterns in the codebase
- Trade-offs between approaches
- Testability and maintainability

Write a brief design summary before proceeding.

## Step: implement
Write the code. Follow codebase conventions.
Needs: design

## Step: review
Self-review the changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
Needs: implement

## Step: test
Write and run tests. Cover happy path and edge cases.
Fix any failures before proceeding.
Needs: implement

## Step: submit
Submit for merge via refinery.
Needs: review, test
```

## quick-fix

```markdown
id: mol-quick-fix
type: molecule
title: Quick Fix

Fast path for small changes.

## Step: implement
Make the fix. Keep it focused.

## Step: test
Run relevant tests. Fix any regressions.
Needs: implement

## Step: submit
Submit for merge.
Needs: test
```

## research

```markdown
id: mol-research
type: molecule
title: Research

Investigation workflow.

## Step: investigate
Explore the question. Search code, read docs,
understand context. Take notes.

## Step: document
Write up findings. Include:
- What you learned
- Recommendations
- Open questions
Needs: investigate
```

## Storage

Built-in molecules live in `<town>/.beads/` as regular issues.
Created during `gt install` or `bd init`.


self-review

Review your own changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
- Security concerns

Fix any issues found before proceeding.

Depends: implement


Merge: gt-rana.1

branch: polecat/rictus
target: main
source_issue: gt-rana.1
rig: gastown


Add godoc comments to exported functions

Several exported functions lack godoc comments. While not critical, adding documentation would improve code maintainability. Focus on:

- Public API functions in each package
- Exported types and their methods
- Functions that have non-obvious behavior

Can be addressed incrementally as code is touched.


gt spawn: pasted work assignment needs manual Enter to start

## Problem

After `gt spawn` pastes the work assignment into Claude, the session waits for Enter.

## Current Behavior

1. `gt spawn gastown/Rictus --issue gt-xxx`
2. Session starts, work is pasted
3. Claude shows 'Pasted text #1 +53 lines' but doesn't start
4. Must manually send Enter or attach and press Enter

## Expected

The spawn should send Enter after pasting to kick off the work.

## Related

Same debounce issue as tmux notifications (gt-vnp9).


Session cycling UX: smooth transitions via TUI wrapper

## Problem

Current CLI agent session cycling is painful:
- Shell → CC starts → priming → context loads → ready → work → exit/crash → repeat
- Each cycle is 30-60 seconds of cold boot
- No continuity between shell and agent's inner state
- Raw "session not running, starting..." loop is the baseline

## GGT Advantages (already have)

- Beads: Work state survives session death completely
- Mail: Handoff notes from past-self to future-self
- Prime commands: Structured context reload

## Gap: Transition Mechanics

Ideas to explore when actively using CLI:

1. **In-band cycling** - `/restart` or `/cycle` command, agent handles own restart without dropping to shell

2. **Hot standby** - TUI maintains pre-warmed session in background, switch to already-primed agent

3. **Persistent wrapper** - Bubbletea TUI stays running across session cycles, CC sessions come/go inside it

4. **Session pooling** - Keep 2-3 primed sessions ready, never wait for cold start

## Deferred

Deliberately P4 until we're actively using the simpler CLI and feel the pain firsthand.


🤝 HANDOFF: Timing fixes applied

Fixed mayor attach timing bug. Completed: timing fix, gt-tulx, Emma beads-6v2. Remaining P1: gt-17zr, gt-kcee, gt-szsq. Run gt prime on startup.


Fix blocking bugs (gt-dsfi, gt-n7z7, gm-c6b)

Fix bugs blocking Witness functionality:

1. gt-dsfi: handoff deadlock
   - Polecats hang when trying to exit
   - Blocks shutdown request handler

2. gt-n7z7: refinery foreground race condition
   - Sometimes detects parent as already running
   - Blocks reliable Refinery startup

3. gm-c6b: mail coordination
   - Cross-rig mail should use town-level database
   - Affects Witness <-> Mayor communication

These should be fixed early as they'll block integration testing.

Fixed gt-dsfi and gt-n7z7. Issue gm-c6b not found in database.


Plugin surface for daemon lifecycle hooks

Allow rigs to customize daemon behavior via hooks/plugins.

## Hook Points

- on_heartbeat: Called during daemon heartbeat cycle
- on_worker_idle: Called when worker goes idle
- on_worker_stuck: Called when stuck detection triggers
- on_lifecycle_request: Called before processing lifecycle

## Configuration

```
<rig>/config/daemon-hooks.json
{
  "on_heartbeat": "./hooks/check-ci-status.sh",
  "on_worker_idle": "./hooks/maybe-assign-work.sh",
  "idle_threshold": "5m",
  "custom_signals": [
    {"name": "ci_status", "command": "./hooks/get-ci.sh"}
  ]
}
```

## Signal Contribution

Hooks can return signals that feed into decision engine:
- SKIP_POKE: Don't poke this agent
- FORCE_POKE: Override backoff, poke now
- CUSTOM_DATA: Extra context for logging

## Use Cases

- Check CI status before interrupting test runs
- Auto-assign work when worker becomes idle
- Custom stuck detection for specific workflows


mol-christmas-launch: 3-day execution plan

---

## Wisp Integration Wave Plan (added 2025-12-21)

Dependency-ordered execution for gt-3x0z (Wisp Molecules) + gt-rana (Patrol System):

### Wave 1 (parallel - no blockers)
- gt-3x0z.1: gt rig init creates .beads-ephemeral/
- gt-3x0z.2: Configure bd for ephemeral molecule bonding
- gt-3x0z.3: gt doctor checks for ephemeral health
- gt-rana.1: Attachment field on pinned beads
- gt-rana.3: mol-deacon-patrol definition

### Wave 2 (after Wave 1)
- gt-3x0z.4: gt spawn --molecule bonds ephemeral (GATE 1)
- gt-rana.2: Daemon attachment detection

### Wave 3-5 (sequential)
- gt-3x0z.5, gt-3x0z.6 → gt-3x0z.7 → gt-3x0z.8 (GATE 2: squash)

### Wave 6+ (patrol integration)
- gt-rana.4: Basic patrol runner (needs gt-rana.3 + gt-3x0z.8)
- gt-3x0z.9: mol-deacon-patrol uses wisp (needs gt-rana.3 + gt-3x0z.8)
- Then: gt-rana.5-7, gt-3x0z.10-12

### Key Gates
1. gt-3x0z.4 - spawn/bond unlocks Phase 2
2. gt-3x0z.8 - squash unlocks patrol integration
3. gt-rana.4 - patrol runner unlocks Phase 2+ patrol


Beads as Universal Data Plane

## Vision

Beads is the data plane for all Gas Town operations. Everything flows through beads:
- Work items (issues, tasks, epics)
- Mail (messages between agents)
- Merge requests (queue entries)
- Workflows (composable execution patterns)
- Resources (leases, locks, quotas)
- Schedules (timed activities)

## New Bead Categories

### Molecules (Composable Workflows)
Crystallized workflow patterns that can be attached to work items.

### Timed Beads (Scheduled Work)
Beads that wake up periodically via daemon.

### Pinned Beads (Ongoing Concerns)
Beads representing persistent concerns, not discrete tasks.

### Resource Beads (Leases/Locks)
Beads representing reserved resources.

## v1 Priority

- **P0**: Molecules (enables engineer-in-box)
- **P2**: Timed, Pinned, Resource beads (post-v1)


HTTP work client: CloudRun dispatch client

## Overview

HTTP client for dispatching work to Cloud Run and streaming results back.

## Implementation

```go
type WorkClient struct {
    serviceURL string
    httpClient *http.Client  // HTTP/2 enabled
}

func NewWorkClient(serviceURL string) *WorkClient {
    return &WorkClient{
        serviceURL: serviceURL,
        httpClient: &http.Client{
            Transport: &http2.Transport{},
            Timeout:   0,  // No timeout for streaming
        },
    }
}

func (c *WorkClient) DispatchWork(ctx context.Context, req WorkRequest) (<-chan WorkEvent, error) {
    // 1. POST to /work
    // 2. Return channel that streams WorkEvents
    // 3. Close channel when done/error
}
```

## Streaming Reader

```go
func (c *WorkClient) streamEvents(body io.Reader, events chan<- WorkEvent) {
    defer close(events)
    decoder := json.NewDecoder(body)
    for {
        var event WorkEvent
        if err := decoder.Decode(&event); err != nil {
            return
        }
        events <- event
    }
}
```

## Files

- `internal/cloudrun/client.go`

## Dependencies

Depends on: gt-9a2.7 (protocol types)
Used by: gt-9a2.8 (CloudRunOutpost)


Work on gt-o9j: Fix tmux status bar polecat count - exclu...

Work on gt-o9j: Fix tmux status bar polecat count - exclude static roles (mayor, deacon, witnesses, refineries, docs, hop). Run 'bd show gt-o9j' for details.


CloudRun worker container: Dockerfile and entrypoint

## Overview

Docker container image for Cloud Run workers.

## Dockerfile

```dockerfile
FROM golang:1.21-alpine AS builder
WORKDIR /app
COPY . .
RUN go build -o gt ./cmd/gt

FROM ubuntu:22.04

# Install Claude Code
RUN apt-get update && apt-get install -y     curl git nodejs npm     && npm install -g @anthropic-ai/claude-code     && apt-get clean

# Install gt
COPY --from=builder /app/gt /usr/local/bin/gt

# Worker entrypoint
COPY deploy/cloudrun/entrypoint.sh /entrypoint.sh
RUN chmod +x /entrypoint.sh

EXPOSE 8080
ENTRYPOINT ["/entrypoint.sh"]
```

## Entrypoint

```bash
#!/bin/bash
git config --global user.name "$GIT_USER"
git config --global user.email "$GIT_EMAIL"
exec gt worker serve --port 8080
```

## Files

- `deploy/cloudrun/Dockerfile`
- `deploy/cloudrun/entrypoint.sh`
- `deploy/cloudrun/README.md`

## Dependencies

Depends on: gt-9a2.11 (HTTP server - gt worker serve)


gt install command: Create workspace structure

Create Gas Town workspace structure.

## Command

```
gt install [path]
```

If path omitted, uses current directory.

## Created Structure

```
<path>/
├── config/
│   ├── town.json      # {"type": "town", "version": 1, ...}
│   └── rigs.json      # {"version": 1, "rigs": {}}
│
└── mayor/
    ├── CLAUDE.md      # Mayor role prompting (from template)
    ├── mail/
    │   └── inbox.jsonl  # Empty inbox
    └── state.json     # Initial mayor state
```

## Implementation

```go
func Install(path string, opts InstallOptions) error

type InstallOptions struct {
    TownName string  // defaults to directory name
    Force    bool    // overwrite existing
}
```

## Steps

1. Validate path (exists, writable)
2. Check not already a town (unless --force)
3. Create config/ directory
4. Write town.json with name and timestamp
5. Write empty rigs.json
6. Create mayor/ directory structure
7. Write CLAUDE.md from template
8. Create empty inbox.jsonl
9. Write initial state.json

## Error Cases

- Path does not exist: Create it (like mkdir -p)
- Already a town: Error unless --force
- Permission denied: Clear error message
- Inside existing town: Warn (nested towns not recommended)

## Templates

Mayor CLAUDE.md comes from embedded template (see gt-u1j.20).


Heartbeat convention: simple liveness signal for agents

Lightweight liveness signal extracted from Deacon epic (gt-5af).

**Implementation**: Each agent writes a timestamp file on activity:
```bash
echo '{"ts":"'$(date -Iseconds)'"}' > ~/gt/<role>/heartbeat.json
```

**Integration points**:
- SessionStart hook writes heartbeat
- Periodic activity (mail check, work completion) refreshes it
- `gt status` shows staleness (e.g., 'mayor: 5m ago')

**Weight**: ~5 lines per agent
**Value**: Quick debugging - see which agents are active at a glance

No monitoring daemon needed - human checks `gt status` when curious.


Work on gt-role-template: Refine witness/CLAUDE.md role t...

Work on gt-role-template: Refine witness/CLAUDE.md role template. Run 'bd show gt-role-template' to see the full issue.


Test Task 2: Add comment to version.go


Automatic spawn for ready work

Auto-spawn polecats for ready work:

When Witness has capacity (active_workers < max_workers):
1. Query bd ready for unblocked issues
2. Filter to rig-appropriate work (by prefix or epic)
3. For each ready issue up to capacity:
   - gt spawn --issue <id>
   - Track that we spawned for this issue

Configuration (in rig config.json):
- max_workers: 4 (default)
- spawn_delay: 5s between spawns
- auto_spawn: true/false

This enables 'fire and forget' swarming:
- Mayor creates epic with children
- Mayor tells Witness to work epic
- Witness spawns polecats automatically
- Witness cleans up as they complete


Worker cleanup: Beads sync on shutdown

Add beads sync verification to worker cleanup checklist and Witness verification.

## Update to Decommission Checklist (gt-sd6)

Add to pre-done verification:
- bd sync --status must show 'Up to date'
- git status .beads/ must show no changes

## Beads Edge Cases

Uncommitted beads changes:
  bd sync
  git add .beads/
  git commit -m 'beads: final sync'

Beads sync conflict (rare):
  git fetch origin main
  git checkout main -- .beads/
  bd sync --force
  git add .beads/
  git commit -m 'beads: resolve sync conflict'

## Update to Witness Verification (gt-f8v)

When capturing worker state:
  town capture <polecat> "bd sync --status && git status .beads/"

Check for:
- bd sync --status shows 'Up to date'
- git status .beads/ shows no changes

If beads not synced, nudge:
  WITNESS CHECK: Beads not synced. Run 'bd sync' then commit .beads/. Signal done when complete.


Merge: gt-5af.2

branch: polecat/Doof
target: main
source_issue: gt-5af.2
rig: gastown


Refinery tmux status: show merge queue length

Add refinery-specific status line showing:
- MQ length (pending merges)
- Currently processing item (if any)
- Maybe: success/failure counts

Implement in runRefineryStatusLine() in internal/cmd/statusline.go


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


Update documentation for new config architecture

Update docs to reflect new structure:
- docs/architecture.md: Directory structure section
- CLAUDE.md files: Config references
- Add docs/configuration.md with full reference


Test infrastructure: fixtures, mocks, integration tests

Test infrastructure for Gas Town.

## Test Categories

### Unit Tests
- Config parsing
- Mail operations
- Merge queue operations
- Template rendering

### Integration Tests
- Git operations (uses real git in temp dirs)
- Full workflows (spawn → work → merge)
- CLI command tests

## Fixtures

```go
package testutil

// Creates temp town with minimal structure
func NewTestTown(t *testing.T) *TestTown

// Creates temp rig with git repo
func NewTestRig(t *testing.T, town *TestTown, name string) *TestRig

// Creates test polecat
func NewTestPolecat(t *testing.T, rig *TestRig, name string) *TestPolecat
```

## Mocks

```go
// Mock tmux for session tests (avoid actual tmux)
type MockTmux struct {
    Sessions map[string][]string  // captured send-keys
}

func (m *MockTmux) NewSession(name, dir string) error
func (m *MockTmux) SendKeys(session, keys string) error
func (m *MockTmux) CapturePane(session string, lines int) (string, error)
```

## Test Helpers

```go
// Run test in temp directory
func InTempDir(t *testing.T, fn func(dir string))

// Initialize git repo for testing
func InitGitRepo(t *testing.T, dir string)

// Assert file exists with content
func AssertFileContains(t *testing.T, path, substr string)

// Assert JSON file has field
func AssertJSONField(t *testing.T, path, field string, expected any)
```

## CI Integration

- go test ./... runs all tests
- Integration tests skip with -short flag
- Coverage report generation

## Test Data

Embedded test fixtures:
```go
//go:embed testdata/*
var testdataFS embed.FS
```


Keepalive signal from bd/gt commands

Every bd and gt command should touch a keepalive file to signal 'agent is alive/working'.

## Implementation

Touch `<workspace>/.gastown/keepalive.json`:
```json
{"last_command": "bd show gt-99m", "timestamp": "2025-12-18T13:45:00Z"}
```

## Usage by Daemon

- Fresh (< 2 min) → agent is working, skip heartbeat
- Stale (2-5 min) → might be thinking, gentle poke
- Very stale (> 5 min) → likely idle, safe to interrupt

## Benefits

- Zero cost (just file I/O)
- Works during long tool calls
- Doesn't require agent cooperation
- Foundation for smarter backoff strategies


Epic: Wisp Molecule Integration

## Vision

Integrate Beads wisp molecules into Gas Town. All orchestration work runs as wisp molecules - patrols, polecat workflows, batch operations. Only digests reach main beads.

## The Steam Engine Metaphor

```
Engine does work → generates steam
Steam wisps rise → execution trace
Steam condenses → digest (distillate)
Steam dissipates → cleaned up (burned)
```

## Architecture

```
Proto Molecules (templates)
    ↓ bd mol bond
Wisps (.beads-wisps/ or inline)
    ↓ bd mol squash + AI summary
Main Beads (digests only)
```

## Vocabulary

| Term | Meaning |
|------|---------|
| bond | Attach proto to work (creates wisps) |
| wisp | Temporary execution step (steam rising) |
| squash | Condense wisps into digest |
| burn | Destroy wisps without record |
| digest | Permanent condensed record (distillate) |

## Key Design Decisions

1. **Wisp location**: Per-rig or inline in main beads with wisp flag
2. **Summary generation**: Agent that did work generates summary (inversion of control)
3. **Squash timing**: Final step of molecule workflow, before signaling done
4. **Crash recovery**: Wisps persist, Witness detects stalls, new agent resumes
5. **Patrols**: Each cycle is fresh wisp molecule, squashed on completion

## Digest Contents

- Molecule type and instance ID
- Assignee, start/end times
- Source issue reference
- AI-generated summary
- Outcomes (issues closed, commits, branches)

## Integration Points

- gt rig init: Configure wisp storage
- gt spawn --molecule: Bond creates wisps
- gt prime: Show wisp molecule context
- Polecat CLAUDE.md: Summary + squash protocol
- gt doctor: Wisp health checks
- Deacon/Witness/Refinery: Patrol molecules

## Phases

Phase 1: Wisp setup infrastructure
Phase 2: Spawn integration
Phase 3: Completion flow (summary + squash)
Phase 4: Patrol integration
Phase 5: Documentation and polish


Add harness overview to Mayor priming

Update gt prime Mayor context to explain the harness concept: umbrella repo for GT installation, rigs underneath, Mayor sits above all rigs


Molecule converge: iterate until AI says done

Work isn't 'done' until AI is confident it's done. Fixes the 85% problem.

**From VC**: internal/iterative/converge.go - 3-7 iterations with AI convergence detection. ~600 lines.
Target: 20%+ more issues discovered. Observed: ~25% average improvement.

**Gas Town implementation**: Molecule converge config:
```yaml
converge:
  strategy: ai
  min_iterations: 3
  max_iterations: 7
  confidence: 0.85
```

Polecat iterates, AI checks convergence. Stop when AI is confident or max reached.

**Value**: Raw agents get to ~85% and stop. Iteration catches the remaining 15%.

**VC metrics**: Convergence rate >70%, mean 4-5 iterations for complex work.


Spawn inject: Enter not submitted after multiline paste

When gt spawn injects a multiline context (85+ lines), Claude Code shows
'[Pasted text #1 +85 lines]' but the prompt is not submitted.

The tmux SendKeys function does include 'Enter' but it appears to not work
for long pasted text:

```go
func (t *Tmux) SendKeys(session, keys string) error {
    _, err := t.run("send-keys", "-t", session, keys, "Enter")
    return err
}
```

Possible fixes:
1. Use tmux paste-buffer instead of send-keys for long text
2. Send Enter separately after the text
3. Use bracketed paste mode correctly

Reproduction:
```bash
gt spawn gastown/Nux --issue gt-u1j.13 --create
# Session shows pasted text but waits at prompt
```


TODO: Detect cycles in molecule dependency graph

molecule.go:302 has a TODO to detect cycles in the dependency graph. Currently, cyclical dependencies could cause issues.


Town Doctor molecule for harness health checks

Create a Town Doctor molecule that any Gas Town agent can run to diagnose and repair harness issues.

## Concept

Instead of just `gt doctor` as a CLI command with hardcoded checks, create a **molecule** (checklist workflow) that:
- Any agent (Mayor, Witness, Polecat) can instantiate
- Walks the agent through diagnostic steps
- Agent uses judgment to fix issues found
- Works as a structured troubleshooting guide

## Why a Molecule?

1. **Agent-driven**: The agent running it becomes "the doctor" temporarily
2. **Extensible**: Add new checks by updating the molecule, not code
3. **Contextual**: Agent can reason about issues, not just run scripts
4. **Self-healing**: Agent can fix problems it finds, not just report them

## Proposed Checks (molecule steps)

1. Verify harness structure (mayor/, .beads/, CLAUDE.md exist)
2. Validate config files (town.json, rigs.json parse correctly)
3. Check beads health (bd doctor, redirect validity)
4. Verify git state (clean working tree, proper remotes)
5. Check rig integrity (each registered rig exists, has config.json)
6. Validate agent clones (mayor/rig/, refinery/rig/ exist and are valid)
7. Check for orphaned worktrees/branches
8. Verify daemon state (if running)

## Integration

- `gt doctor` could instantiate the molecule for the current agent
- Or agent can run `bd ready` and pick up doctor tasks when prioritized
- Results logged to beads for audit trail

## Related

- gt-cr9: Harness Design & Documentation (completed)
- Molecules design in architecture.md


gt mail send: --priority flag should work like bd mail send

UX inconsistency: gt mail send passes flags that bd mail send doesn't support.

## Root Cause

router.go line 42 passes `--priority` to bd:
```go
args = append(args, "--priority", fmt.Sprintf("%d", beadsPriority))
```

But `bd mail send` only has `--urgent` (boolean), not `--priority`.

## Fix Options

1. Add `--priority` flag to `bd mail send` (preferred - more expressive)
2. Change router to only use `--urgent` when priority=0

## Also Affected

- `--type` flag (line 46) - bd mail send doesn't have this
- `--thread-id` flag (line 51) - bd mail send doesn't have this
- `--reply-to` flag (line 56) - bd mail send doesn't have this

The router assumes bd mail send has features it doesn't have.


Swarms of One: Lightweight single-worker task dispatch

Design and implement a lightweight pattern for firing off single workers to handle tasks without full swarm overhead.

## Context

Currently we have:
- town spawn: Creates a polecat in a rig with issue assignment
- Swarms (sw-*): Full lifecycle tracking with manifest, state, events, reports
- Ephemeral rigs (rig-*): Temporary worker groups for swarms

What's missing: A simple way to say 'fire off a worker to do X' without swarm ceremony.

## Design Questions

1. Should this be a new command like 'gt fire' or an option on existing commands?
2. Should single tasks still get swarm IDs (sw-N) for consistency/queryability?
3. Should it default to creating new workers or support --reuse for idle polecats?
4. How does this relate to crew workers (gt-cik)?

## Possible Interface

gt fire --rig gastown --issue gt-xyz [--prompt '...']
gt fire gastown/QuickTask --issue gt-xyz

## Related

- gt-cik: Overseer Crew (user-managed persistent workspaces)
- gt-kmn: Swarm System epic


Work on gt-role-template: Refine witness/CLAUDE.md role template. See issue for details. Run 'bd show gt-role-template' to see the full issue.


Crew workers: design documentation and remaining work

## Summary

Crew workers are user-managed persistent workspaces within a rig, distinct from polecats.

## Current Implementation

### Commands (all working)
- `gt crew add <name>` - Create workspace (git clone)
- `gt crew list` - List workspaces with status
- `gt crew at <name>` - Attach to tmux session
- `gt crew remove <name>` - Remove workspace
- `gt crew pristine [<name>]` - git pull + bd sync
- `gt crew refresh <name>` - Context cycle with handoff mail
- `gt crew status [<name>]` - Detailed status
- `gt crew rename <name>` - Rename workspace

### Crew vs Polecat

| Aspect | Crew | Polecat |
|--------|------|---------|
| Lifecycle | User-managed | Witness-managed |
| Scheduling | Manual | `gt spawn` |
| Merge flow | Direct push OK | Integration branch → refinery |
| Garbage collection | Never | Auto on completion |
| Identity | Long-lived (emma, dave) | Ephemeral (Nux, Toast) |

## Known Bugs

- **gt-70b3**: detectSender() doesn't recognize crew workers
- **gt-vdp0**: Crew CLAUDE.md shows Refinery template

## Potential Enhancements

1. Rebase helper in `gt crew pristine` for conflict resolution
2. Cross-rig crew support (crew worker in multiple rigs?)
3. Better mail identity auto-detection for crew


Mail system: message types and threading

GGT mail system needs message types and threading like PGT.

## 1. Message Types
Add to internal/mail/types.go:
```go
type MessageType string
const (
    TypeTask         MessageType = "task"         // Required processing
    TypeScavenge     MessageType = "scavenge"     // Optional first-come work
    TypeNotification MessageType = "notification" // Informational
    TypeReply        MessageType = "reply"        // Response to message
)

// Update Message struct
type Message struct {
    // existing fields...
    Type     MessageType `json:"type"`
    ThreadID string      `json:"thread_id,omitempty"`
    ReplyTo  string      `json:"reply_to,omitempty"`
}
```

## 2. Priority Levels
Expand from 2 to 4:
```go
type Priority string
const (
    PriorityLow    Priority = "low"
    PriorityNormal Priority = "normal"
    PriorityHigh   Priority = "high"
    PriorityUrgent Priority = "urgent"
)
```

## 3. CLI Updates
internal/cmd/mail.go:
- Add --type flag to send: `gt mail send ... --type task`
- Add --reply-to flag: `gt mail send ... --reply-to <msg-id>`
- Add thread command: `gt mail thread <thread-id>`

## 4. Threading Logic
NewMessage() should auto-generate thread_id if not a reply.
Reply messages inherit thread_id from original.

## Files to Modify
- internal/mail/types.go: Add types, expand Priority
- internal/mail/mailbox.go: Thread filtering
- internal/cmd/mail.go: CLI flags and thread command

## PGT Reference
gastown-py/src/gastown/mail/message.py

## Acceptance Criteria
- [ ] Messages have type field (default: notification)
- [ ] 4 priority levels supported
- [ ] Reply creates thread with shared thread_id
- [ ] gt mail thread <id> shows conversation


Polecat mood command and status line display

CLI and status line support for polecat mood.

## CLI Command
```
gt polecat mood <name> <emoji>   # Set mood
gt polecat mood <name>           # Get mood
```

Sets GT_MOOD environment variable in the polecat's tmux session.

## Status Line Integration
Update runWorkerStatusLine() to read mood:
```go
mood, _ := t.GetEnvironment(session, "GT_MOOD")
if mood != "" {
    icon = mood  // Use mood emoji instead of default
} else {
    icon = AgentTypeIcons[AgentPolecat]  // Fallback to 😺
}
```

## Storage
Mood stored in tmux session environment (ephemeral, per-session).
No persistence needed - mood is reassessed each patrol cycle.

Depends on: gt-u818 (plugin system)


Refinery Engineer: Role prompting and CLAUDE.md

Create refinery/CLAUDE.md with Chief Merge Engineer role context. Include:
- Role identity and responsibilities
- Decision authority (merge order, test frequency, binary rebuilds)
- Communication patterns (Witness, Deacon)
- Session lifecycle (handoff bead protocol)
- Key commands reference


MR: gt-test (main)

branch: main
target: main
source_issue: gt-test


Phase 3: Callbacks and plugins

Mail-based callback protocol and plugin surface.

## Callbacks
- Polecat → Witness: shutdown requests
- Witness → Deacon: escalations, status
- Crew → Deacon: recycle requests
- Deacon → Mayor: escalations

## Plugins
- .beads/plugins.yaml registry
- Cooldown tracking
- Plugin runner in deacon patrol

Depends: Phase 2


generate-summary

Generate a summary for molecule squash.
File any remaining work as issues.

Document any important context for the squash digest.

Depends: submit-merge


Daemon: configurable heartbeat interval

Heartbeat interval is hardcoded to 60s. Should be configurable via:
- town.json config
- Command line flag
- Environment variable

Default 60s is reasonable but some deployments may want faster/slower.


CLI: mail commands (send, inbox, read)

CLI: mail commands wrapping bd mail.

## Status

Current implementation works with JSONL files. Refactor to wrap bd mail CLI.

## Commands

### gt mail inbox
```
gt mail inbox [--unread] [--json]
```
Wraps: `bd mail inbox [--json]`

### gt mail read
```
gt mail read <id>
```
Wraps: `bd mail read <id> && bd mail ack <id>`
Note: bd mail read + ack marks as read.

### gt mail send
```
gt mail send <address> -s "Subject" -m "Body" [--notify]
```
Wraps: `bd mail send <recipient> -s "Subject" -m "Body"`
If --notify: inject tmux notification after send.

### gt mail delete
```
gt mail delete <id>
```
Wraps: `bd mail ack <id>` (closes the message issue)

## Address Translation

Same as gt-u1j.6:
- `mayor/` → `mayor`
- `<rig>/refinery` → `<rig>-refinery`
- `<rig>/<polecat>` → `<rig>-<polecat>`

## Dependencies

- gt-u1j.6: Mail system backend


Merge: gt-3x1.4

branch: polecat/Nux
target: main
source_issue: gt-3x1.4
rig: gastown