Witness pre-kill verification protocol

Add pre-kill verification protocol to Witness CLAUDE.md template.

## Protocol for Witness Prompting

```markdown
## Pre-Kill Verification Protocol

Before killing any worker session, verify workspace is clean.

### Verification Steps

When a worker signals done:

1. **Capture worker state**:
```bash
town capture <polecat> "git status && git stash list && bd sync --status"
```

2. **Assess the output** (use your judgment):
- Is working tree clean?
- Is stash list empty?
- Is beads synced?

3. **Decision**:
- **CLEAN**: Proceed to kill session
- **DIRTY**: Send nudge with specific issues

### Nudge Templates

**Uncommitted Changes**:
```
town inject <polecat> "WITNESS CHECK: Uncommitted changes found. Please commit or discard: <files>. Signal done when clean."
```

**Beads Not Synced**:
```
town inject <polecat> "WITNESS CHECK: Beads not synced. Run 'bd sync' then commit. Signal done when complete."
```

### Kill Sequence

Only after verification passes:
```bash
town kill <polecat>
town sleep <polecat>
```

### Escalation

If worker fails verification 3+ times:
```bash
town mail send mayor/ -s "Escalation: <polecat> stuck" -m "Cannot complete cleanup after 3 attempts. Issues: <list>."
```
```

## Implementation

Add to WITNESS_CLAUDE.md template.


Witness session cycling and handoff

Add session cycling and handoff protocol to Witness CLAUDE.md template.

## Session Cycling Protocol

```markdown
## Session Cycling

Your context will fill over long swarms. Proactively cycle when:
- Running for many hours
- Losing track of which workers you've checked
- Responses getting slower
- About to start complex operation

### Handoff Protocol

1. **Capture current state**:
```bash
town list .           # Worker states
town all beads        # Pending verifications
town inbox            # Unprocessed messages
```

2. **Compose handoff note**:
```
[HANDOFF_TYPE]: witness_cycle
[TIMESTAMP]: <now>
[RIG]: <rig>

## Active Workers
<list workers and status>

## Pending Verifications
<workers signaled done but not verified>

## Recent Actions
<last 3-5 actions>

## Warnings/Notes
<anything next session should know>

## Next Steps
<what should happen next>
```

3. **Send handoff**:
```bash
town mail send <rig>/witness -s "Session Handoff" -m "<note>"
```

4. **Exit cleanly**: End session, daemon spawns fresh one.

### On Fresh Session Start

1. Check for handoff: `town inbox | grep "Session Handoff"`
2. If found, read it and resume from handoff state
3. If not found, do full status check
```

## Implementation

Add to WITNESS_CLAUDE.md template.


Worker prompting: Beads write access

Add beads write access section to polecat AGENTS.md.template.

## Beads Access Section for Prompting

```markdown
## Beads Access

You have **full beads access** - create, update, and close issues.

### Quick Reference

```bash
# View work
bd ready                    # Issues ready (no blockers)
bd list                     # All open issues
bd show <id>                # Issue details

# Create issues
bd create --title="Fix bug" --type=bug --priority=2
bd create --title="Add feature" --type=feature

# Update issues
bd update <id> --status=in_progress    # Claim work
bd close <id>                          # Mark complete

# Sync (required before merge!)
bd sync                     # Commit beads changes to git
```

### When to Create Issues

Create beads issues when you discover work that:
- Is outside your current task scope
- Would benefit from tracking
- Should be done by someone else

**Good examples**:
```bash
bd create --title="Race condition in auth" --type=bug --priority=1
bd create --title="Document API rate limits" --type=task --priority=3
```

**Don't create for**:
- Tiny fixes you can do in 2 minutes
- Vague "improvements" with no scope
- Work already tracked elsewhere

### Beads Sync Protocol

**CRITICAL**: Always sync beads before merging!

```bash
bd sync                    # Commits beads changes
git add .beads/
git commit -m "beads: sync"
```

If you forget to sync, beads changes are lost when session ends.
```

## Implementation

Add to AGENTS.md.template polecat section.


/restart: Personal slash command for in-place agent restart

Create ~/.claude/commands/restart.md that restarts current Gas Town agent in place.

## Detection
- Read tmux session name: gt-mayor, gt-witness-*, gt-refinery-*, gt-polecat-*
- Fallback: check GT_ROLE env var

## Behavior by role
- mayor: gt mayor restart (sends Ctrl-C, loop respawns)
- witness: gt witness restart
- refinery: gt refinery restart
- polecat: gt polecat restart (or witness-mediated)

## Command format
Uses backticks for inline bash to detect context, then instructs Claude to run appropriate restart.


Witness session startup (gt witness start)

Implement gt witness start <rig>

Should:
1. Verify rig exists and has witness/ directory
2. Check for existing witness session (don't double-start)
3. Create tmux session: gt-<rig>-witness
4. Start Claude Code with --dangerously-skip-permissions
5. Send gt prime to load context
6. Send startup prompt

Similar pattern to refinery startup in internal/refinery/manager.go


Overseer Crew: User-managed persistent workspaces

## Overview

Crew workers are the overseer's (human's) personal workspaces within a rig. Unlike polecats which are witness-managed and ephemeral, crew workers are:

- **Persistent**: Not auto-garbage-collected
- **User-managed**: Overseer controls lifecycle
- **Long-lived identities**: dave, emma, fred - recognizable names
- **Gas Town integrated**: Mail, handoff mechanics work
- **Tmux optional**: Can work in terminal directly

## Directory Structure

```
<rig>/
  polecats/       # Managed workers (witness controls)
  refinery/       # Merge queue processor
  witness/        # Pit boss
  crew/           # Overseer's personal workspaces
    dave/         # Full clone, persistent
    emma/         # Full clone, persistent
    fred/         # Full clone, persistent
```

## Key Differences from Polecats

- Location: crew/ instead of polecats/
- Lifecycle: User-managed, not witness-managed
- Auto-cleanup: Never (polecats auto-cleanup on swarm land)
- Issue assignment: Optional (polecats require it)
- Tmux: Optional (polecats require it)
- Mail & Handoff: Yes for both
- Identity: Persistent (polecats are ephemeral)

## CLI Commands

- gt crew add <name> [--rig <rig>] - Create crew workspace
- gt crew list [--rig <rig>] - List crew workspaces
- gt crew at <rig>/<name> - Attach to workspace (start session)
- gt crew attach <name> - Attach (infer rig from cwd)
- gt crew refresh <name> - Handoff + restart (context cycling)
- gt crew remove <name> [--force] - Remove workspace
- gt crew status [<name>] - Show workspace status

## Design Notes

- Crew workers use full git clones (not worktrees)
- Optional beads integration via BEADS_DIR
- Mail-to-self handoff works for context cycling
- No witness monitoring or nudging
- No automatic issue assignment required

## Background

Users often maintain separate repo clones for serial agent work. This is tedious to set up manually. Crew workspaces bring these into Gas Town's infrastructure while keeping user control.


Define mol-gastown-boot proto structure

Create the proto molecule definition with all steps.

## Proto Definition

Each step has:
- Title (step name)
- Description with Action/Verify/OnStall/OnFail sections
- Dependencies (Needs: directive)

## Steps

1. ensure-daemon
   - Action: gt daemon status || gt daemon start
   - Verify: daemon PID exists and responding

2. ensure-deacon
   - Action: gt deacon start
   - Verify: session exists, not stalled, heartbeat fresh
   - OnStall: gt nudge deacon/ "Start patrol."

3. ensure-witnesses (parallel container)
   - ensure-gastown-witness
   - ensure-beads-witness
   - Verify each: session exists, not stalled

4. ensure-refineries (parallel container)
   - ensure-gastown-refinery
   - ensure-beads-refinery
   - Verify each: session exists, not stalled

5. verify-town-health
   - Action: gt status
   - Verify: all expected agents shown

## Output

Proto stored in beads as molecule type issue.


Work on gt-o9j: Fix tmux status bar polecat count - exclu...

Work on gt-o9j: Fix tmux status bar polecat count - exclude static roles (mayor, deacon, witnesses, refineries, docs, hop). Run 'bd show gt-o9j' for details.


Workspace detection: Find() walking up directory tree

Find workspace root by walking up directory tree looking for Gas Town markers.

## Detection Logic

Walk up from current directory, looking for:
1. `config/town.json` - Primary marker (visible config dir per gt-iib)
2. `mayor/` directory at town level - Secondary marker

Stop at filesystem root if neither found.

## Interface

```go
// Find locates the town root from the given directory
func Find(startDir string) (string, error)

// FindOrError is like Find but returns a user-friendly error
func FindOrError(startDir string) (string, error)
```

## Return Values

- Success: Absolute path to town root
- Not found: Empty string + specific error
- Error: Empty string + wrapped error

## Edge Cases

- Symlinks: Follow them (use filepath.EvalSymlinks)
- Permissions: Return error if can't read directory
- Nested towns: Return nearest ancestor (shouldn't happen in practice
EOF
)


Witness startup: bond mol-witness-patrol on start

Wire up Witness to automatically bond its patrol molecule on startup.

## Desired behavior
On Witness session start:
1. gt prime detects RoleWitness
2. Check for existing in-progress patrol
3. If found: resume from current step
4. If not found: bd mol bond mol-witness-patrol --wisp
5. Output patrol context to agent

## Depends on
- gt-83k0 (mol-witness-patrol definition)
- gt-caih (handoff bead state persistence)


mol-polecat-lease

Semaphore tracking a single polecat's lifecycle.
Vars: {{polecat}}, {{issue}}

Used by Witness to track polecat lifecycle during patrol. The Witness bonds
this proto for each active polecat, creating a lease that tracks the polecat
from spawn through work to cleanup.

## Step: boot
Spawned. Verify it starts working.

Check if the polecat is alive and working:
```bash
gt peek {{polecat}}
```

If idle for too long, nudge:
```bash
gt nudge {{polecat}} "Please start working on your assigned issue."
```

Timeout: 60s before escalation to Mayor.

## Step: working
Actively working. Monitor for stuck.

The polecat is processing its assigned issue ({{issue}}).
Monitor via peek. Watch for:
- Progress on commits
- Status updates in beads
- SHUTDOWN mail when done

Wait for SHUTDOWN signal from the polecat.
Needs: boot

## Step: done
Exit received. Ready for cleanup.

The polecat has completed its work and sent SHUTDOWN.
Perform cleanup:
```bash
gt session kill {{polecat}}
gt worktree prune {{polecat}}
```

Update beads state and close the lease.
Needs: working


Post-work discovery: AI analysis finds follow-on issues

AI analyzes completed work to discover: bugs, punted work, follow-on tasks.

**From VC**: Supervisor.AnalyzeResult() with iterative refinement. ~300 lines.

**Gas Town implementation**: Post-work hook in molecule:
```yaml
post_work:
  discover:
    - bugs
    - punted_items
    - follow_on_work
  file_as: beads
```

Polecat output gets analyzed by AI, discovered work becomes beads issues.

**Value**: Nothing gets forgotten. VC found ~25% more issues with refinement.

**Key**: Use semantic deduplication (gt-xxx) to avoid pollution.


gt crew restart command

Add a 'gt crew restart' command that kills the tmux session and restarts fresh. Useful when a crew member gets confused or needs a clean slate.

Should:
- Kill existing tmux session if running
- Start fresh session with claude
- Run gt prime to reinitialize context

Alias: gt crew rs


Refinery and witness rigs should redirect .beads to mayor rig

The refinery's rig clone and witness rig clones should have their .beads directories redirect to the mayor's rig beads (like polecats do).

Current state:
- Polecats have .beads symlinked/redirected to mayor rig beads
- Refinery and witness have their own .beads (or none)

Desired state:
- refinery/rig/.beads -> mayor/rig/.beads (or equivalent redirect)
- witness/rig/.beads -> mayor/rig/.beads (or equivalent redirect)

This ensures all rig agents share the same issue tracking state.


Molecule Phase Terminology Documentation

Document the three-phase molecule lifecycle with consistent terminology:

## The Phases (States of Matter)

| Phase | State | Nature |
|-------|-------|--------|
| **Proto** | Solid/Crystal | Frozen template, static definition in catalog |
| **Mol** | Liquid | Reified instance, malleable, tracked in git (durable) |
| **Wisp** | Gas | Evaporates after squash, ephemeral orchestration |

## Documentation Gaps Identified

### High Priority
1. Update vision.md Steam Engine metaphor to use proto/mol/wisp terminology
2. Add lifecycle diagram: Proto → bond → Mol or Wisp → squash → Digest
3. Document Go types for phases (ProtoMolecule, etc.)
4. Document .beads-ephemeral/ structure and purpose

### Medium Priority
5. Update CLAUDE.md files (polecat, witness, refinery) with molecule workflow
6. Document bd mol bond/squash/burn CLI API with examples
7. Add polecat guide: Executing molecules and generating summaries

### Low Priority
8. Add terminology glossary to architecture.md
9. Create troubleshooting playbook for stuck molecules
10. Add reference diagrams for state transitions

## Current State
- architecture.md has good molecule basics but uses inconsistent terminology
- vision.md has Steam Engine metaphor (proto=fuel, wisp=steam, digest=distillate)
- molecules.md has detailed reference but needs phase clarity
- builtin_molecules.go has 8 molecules but no phase documentation in code


Polecat doesn't auto-start after spawn inject - requires manual nudge

## Problem

After `gt spawn --issue <id> --create`, the polecat session shows Claude Code started with the injected prompt, but Claude doesn't begin processing. The prompt just sits there until manually nudged.

## Evidence

```
$ gt spawn --issue gt-rixa --rig gastown --create
...
✓ Session started. Attach with: gt session at gastown/furiosa
  Polecat nudged to start working
  Witness notified to monitor startup
```

Session shows:
```
> You have a work assignment. Run 'gt mail inbox' to see it, then start
  working on issue gt-rixa.

  ⏵⏵ bypass permissions on (shift+tab to cycle)
```

But Claude doesn't respond. Manual nudge required:
```
$ gt nudge gt-gastown-furiosa "Please start working..."
```

After nudge, polecat immediately starts working correctly.

## Hypothesis

The spawn inject happens before Claude Code is fully initialized. The text arrives in the input buffer, but Claude hasn't started listening yet. By the time Claude starts, the input has already been 'consumed' as initial prompt text but not submitted.

## Resolution Plan

This will be solved by the **polecat molecule workflow** (mol-polecat-work), which provides structured lifecycle management. The molecule approach handles startup, work, and shutdown as discrete steps with proper state tracking.

**Blocked on**: beads/crew/dave completing ephemeral molecules (bd mol bond, ephemeral beads repo).

## Workaround

For now, use `gt nudge` if a polecat doesn't start within ~30 seconds of spawn.


**VERIFICATION GATE**: This step enforces the Beads Promise.

If tests PASSED: This step auto-completes. Proceed to merge.

If tests FAILED:
1. Diagnose: Is this a branch regression or pre-existing on main?
2. If branch caused it:
   - Abort merge
   - Notify polecat: "Tests failing. Please fix and resubmit."
   - Skip to loop-check
3. If pre-existing on main:
   - Option A: Fix it yourself (you're the Engineer!)
   - Option B: File a bead: bd create --type=bug --priority=1 --title="..."

**GATE REQUIREMENT**: You CANNOT proceed to merge-push without:
- Tests passing, OR
- Fix committed, OR
- Bead filed for the failure

This is non-negotiable. Never disavow. Never "note and proceed."

instantiated_from: mol-refinery-patrol
step: handle-failures


Create mol-gastown-polecat derived molecule

Create the standard Gas Town polecat workflow molecule.

## Molecule Definition
\`\`\`markdown
## Molecule: gastown-polecat
Full workflow for Gas Town polecats including binary installation.

Includes: mol-engineer-in-box

## Step: install-binary
After merge is submitted, rebuild and install the local gt binary.
This ensures the latest code is available to all local agents.

Run from the rig directory:
\`\`\`
go build -o gt ./cmd/gt
go install ./cmd/gt
\`\`\`

Needs: submit
\`\`\`

## Why This Molecule
Every polecat that pushes to main should also rebuild the binary.
This ensures the installed gt is always current with main.

## Implementation
1. Add to builtin_molecules.go (after Includes support lands)
2. Update SeedBuiltinMolecules
3. Run gt molecule seed

## Acceptance
- [ ] mol-gastown-polecat exists
- [ ] Includes all engineer-in-box steps
- [ ] Adds install-binary step after submit
- [ ] Can be used with gt spawn --molecule


Epic: Wisp Molecule Integration

## Vision

Integrate Beads wisp molecules into Gas Town. All orchestration work runs as wisp molecules - patrols, polecat workflows, batch operations. Only digests reach main beads.

## The Steam Engine Metaphor

```
Engine does work → generates steam
Steam wisps rise → execution trace
Steam condenses → digest (distillate)
Steam dissipates → cleaned up (burned)
```

## Architecture

```
Proto Molecules (templates)
    ↓ bd mol bond
Wisps (.beads-wisps/ or inline)
    ↓ bd mol squash + AI summary
Main Beads (digests only)
```

## Vocabulary

| Term | Meaning |
|------|---------|
| bond | Attach proto to work (creates wisps) |
| wisp | Temporary execution step (steam rising) |
| squash | Condense wisps into digest |
| burn | Destroy wisps without record |
| digest | Permanent condensed record (distillate) |

## Key Design Decisions

1. **Wisp location**: Per-rig or inline in main beads with wisp flag
2. **Summary generation**: Agent that did work generates summary (inversion of control)
3. **Squash timing**: Final step of molecule workflow, before signaling done
4. **Crash recovery**: Wisps persist, Witness detects stalls, new agent resumes
5. **Patrols**: Each cycle is fresh wisp molecule, squashed on completion

## Digest Contents

- Molecule type and instance ID
- Assignee, start/end times
- Source issue reference
- AI-generated summary
- Outcomes (issues closed, commits, branches)

## Integration Points

- gt rig init: Configure wisp storage
- gt spawn --molecule: Bond creates wisps
- gt prime: Show wisp molecule context
- Polecat CLAUDE.md: Summary + squash protocol
- gt doctor: Wisp health checks
- Deacon/Witness/Refinery: Patrol molecules

## Phases

Phase 1: Wisp setup infrastructure
Phase 2: Spawn integration
Phase 3: Completion flow (summary + squash)
Phase 4: Patrol integration
Phase 5: Documentation and polish


Self-test

Testing gt mail works


Simplify Go daemon to Deacon-watcher

Refactor internal/daemon to only: (1) check deacon/heartbeat.json every 60s, (2) poke gt-deacon if stale, (3) restart Deacon and mail for help if very stale. Remove all lifecycle processing and agent poking.


Phase 2.1: gt spawn --molecule bonds in ephemeral

Make gt spawn molecule-aware with ephemeral bonding.

## New Flag

```bash
gt spawn --issue gt-xxx --molecule mol-polecat-work
```

## Behavior

1. Create polecat with fresh worktree (existing)
2. Bond molecule in ephemeral: `bd mol bond mol-polecat-work --ephemeral`
3. Link molecule root to source issue
4. Include molecule context in work assignment mail
5. Start session

## Work Assignment Mail

```
Subject: Work Assignment: Fix lifecycle bug [MOLECULE]

You are working on gt-rixa as part of molecule mol-polecat-work.

Molecule instance: eph-abc123
Current step: read-assignment (1/8)

Follow the molecule workflow. When complete, generate summary and squash.
```


Deacon rounds molecule: the kernel execution loop

Define and implement mol-deacon-rounds - the molecule the Deacon executes each wake.

## Molecule Definition

```markdown
# mol-deacon-rounds

The Deacon kernel - executed on every wake cycle.

## Step: session-check
Check context budget. If low, cycle to fresh session.
Needs: (none - always runs first)

## Step: health-scan
Check health of all monitored agents:
- Mayor (gt-mayor session)
- Witnesses (gt-*-witness sessions)
- Refineries (gt-*-refinery sessions)
- Crew (gt-*-* sessions, lifecycle only)

Remediate unhealthy agents:
- Restart dead sessions
- Nudge stuck agents
- Escalate if remediation fails

Needs: session-check

## Step: lifecycle
Process pending lifecycle requests from mail:
- LIFECYCLE: <identity> requesting cycle
- LIFECYCLE: <identity> requesting restart
- LIFECYCLE: <identity> requesting shutdown

Needs: health-scan

## Step: plugins
Run due plugins:
1. Check scheduled plugins (cron-like)
2. Check event-triggered plugins (from mail events)
3. Check human-requested plugins (from mail)
4. Execute each, record outcomes

Needs: lifecycle

## Step: events
Process timer and event callbacks:
- TIMER: <identity> wake at <time>
- EVENT: <type> <payload>

Notify relevant agents or trigger actions.

Needs: plugins

## Step: complete
Finalize the cycle:
1. Update heartbeat.json
2. Clear/update keepalive.json
3. Log summary
4. Return to prompt (wait for next wake)

Needs: events
```

## Execution

The Deacon reads this molecule from its pinned bead and executes steps in order.
Each step:
1. Announces "Starting <step>"
2. Performs the step logic
3. Records outcome
4. Proceeds to next step

## Step Plugins

Each step can have inline plugins (additional attention):
```yaml
step: health-scan
  plugins:
    - advanced-diagnostics  # Run if basic scan finds issues
```

## Relation to bd mol

Uses the same molecule format as bd mol for polecats.
Deacon molecule is special: it's the kernel, not work.


Workspace cleanup: preflight and postflight

Workspace preflight and postflight commands for clean state management.

## Preflight
```
gt preflight [--rig <rig>] [--dry-run]
```

Run before starting batch work:
1. Clean stale mail in inboxes
2. Check for stuck workers (warn)
3. Check rig health (polecats, refinery)
4. Verify git state is clean
5. Run bd sync to ensure beads current

## Postflight
```
gt postflight [--rig <rig>] [--archive-mail] [--dry-run]
```

Run after batch work completes:
1. Archive old mail with --archive-mail
2. Clean up stale integration branches
3. Sync beads
4. Report on rig state

## Implementation
```go
func Preflight(rigName string, dryRun bool) (*PreflightReport, error)
func Postflight(rigName string, opts PostflightOptions) (*PostflightReport, error)
```

## Report Structures
```go
type PreflightReport struct {
    MailCleaned    int
    RigHealthy     bool
    StuckWorkers   []string
    Warnings       []string
}

type PostflightReport struct {
    MailArchived   int
    BranchesCleaned int
    Warnings       []string
}
```

## Note

These are workspace maintenance commands, not tied to "swarm" lifecycle. Run them anytime to keep the rig clean.

## Acceptance Criteria
- [ ] Preflight cleans stale state
- [ ] Postflight archives old mail
- [ ] Both have --dry-run mode
- [ ] Clear reports of actions taken


Update templates for Propulsion Principle

Overhaul agent prompts to embody the Universal Gas Town Propulsion Principle:

> If you find something on your hook, YOU RUN IT.

Templates to update:
- [ ] deacon.md.tmpl - Check hook first, no decision logic
- [ ] polecat.md.tmpl - Propulsion startup, follow molecule
- [ ] witness.md.tmpl - Sling wisps when spawning agents
- [ ] refinery.md.tmpl - Accept slung epics

Key changes:
1. Remove 'should I run this?' decision points
2. Add 'check your hook' as step 1 of startup
3. Make molecule-following the default mode
4. Simplify - agents don't think, they execute


Mail system: JSONL inbox, delivery, tmux injection

Refactor mail system to wrap bd mail commands.

## Status

Current implementation uses JSONL files directly. Now that Beads mail is available (gt-r01 closed), refactor to use bd mail as the backend.

## Implementation

Replace internal/mail/* with thin wrappers around bd CLI:

```go
// Send wraps: bd mail send <to> -s <subject> -m <body>
func (r *Router) Send(msg *Message) error

// List wraps: bd mail inbox --json
func (m *Mailbox) List() ([]*Message, error)

// Get wraps: bd mail read <id> --json
func (m *Mailbox) Get(id string) (*Message, error)

// MarkRead wraps: bd mail ack <id>
func (m *Mailbox) MarkRead(id string) error
```

## Address Translation

GGT addresses → Beads recipients:
- `mayor/` → `mayor`
- `<rig>/refinery` → `<rig>-refinery`
- `<rig>/<polecat>` → `<rig>-<polecat>`

## Tmux Notification

Keep the tmux injection for --notify flag. After bd mail send, optionally inject notification into tmux session.

## Migration

No migration needed - bd mail creates messages as beads issues with type=message. Old JSONL inboxes can be ignored or cleaned up.

## Dependencies

- gt-r01: CLOSED (Beads mail available)
- gt-u1j.4: Tmux wrapper (for notifications)


Add deacon/ mail identity support

Ensure deacon/ works as a mail identity in town-level beads. Test with bd mail send deacon/ and bd mail inbox --identity deacon/.


Prompt templates: role contexts, nudge messages

Prompt templates for role contexts and messages.

## Template Types

### Role CLAUDE.md Templates

For gt prime and CLAUDE.md generation:
- Mayor template
- Witness template
- Refinery template
- Polecat template

### Message Templates

For notifications and nudges:
- Spawn assignment
- Witness nudge
- Escalation to Mayor
- Session handoff

## Implementation

```go
//go:embed templates/*.md.tmpl
var templateFS embed.FS

type Templates struct {
    fs embed.FS
}

func NewTemplates() *Templates
func (t *Templates) RenderRole(role string, data RoleData) (string, error)
func (t *Templates) RenderMessage(name string, data any) (string, error)
```

## Template Data

```go
type RoleData struct {
    Role      string
    RigName   string
    TownRoot  string
    Polecats  []string
    Commands  []CommandHelp
}

type SpawnData struct {
    Issue       string
    Title       string
    Priority    int
    Description string
}

type NudgeData struct {
    Polecat    string
    Reason     string
    NudgeCount int
    MaxNudges  int
}
```

## Template Location

Embedded in binary via go:embed:
```
internal/templates/
├── roles/
│   ├── mayor.md.tmpl
│   ├── witness.md.tmpl
│   ├── refinery.md.tmpl
│   └── polecat.md.tmpl
└── messages/
    ├── spawn.md.tmpl
    ├── nudge.md.tmpl
    └── escalation.md.tmpl
```

## Usage

gt prime uses role templates.
gt spawn uses spawn template.
Witness uses nudge/escalation templates.


mol-polecat-work

Full polecat lifecycle from assignment to decommission.

This proto enables nondeterministic idempotence for polecat work.
A polecat that crashes after any step can restart, read its molecule state,
and continue from the last completed step. No work is lost.

Variables:
- gt-test123 - The source issue ID being worked on


Test infrastructure: fixtures, mocks, integration tests

Test infrastructure for Gas Town.

## Test Categories

### Unit Tests
- Config parsing
- Mail operations
- Merge queue operations
- Template rendering

### Integration Tests
- Git operations (uses real git in temp dirs)
- Full workflows (spawn → work → merge)
- CLI command tests

## Fixtures

```go
package testutil

// Creates temp town with minimal structure
func NewTestTown(t *testing.T) *TestTown

// Creates temp rig with git repo
func NewTestRig(t *testing.T, town *TestTown, name string) *TestRig

// Creates test polecat
func NewTestPolecat(t *testing.T, rig *TestRig, name string) *TestPolecat
```

## Mocks

```go
// Mock tmux for session tests (avoid actual tmux)
type MockTmux struct {
    Sessions map[string][]string  // captured send-keys
}

func (m *MockTmux) NewSession(name, dir string) error
func (m *MockTmux) SendKeys(session, keys string) error
func (m *MockTmux) CapturePane(session string, lines int) (string, error)
```

## Test Helpers

```go
// Run test in temp directory
func InTempDir(t *testing.T, fn func(dir string))

// Initialize git repo for testing
func InitGitRepo(t *testing.T, dir string)

// Assert file exists with content
func AssertFileContains(t *testing.T, path, substr string)

// Assert JSON file has field
func AssertJSONField(t *testing.T, path, field string, expected any)
```

## CI Integration

- go test ./... runs all tests
- Integration tests skip with -short flag
- Coverage report generation

## Test Data

Embedded test fixtures:
```go
//go:embed testdata/*
var testdataFS embed.FS
```


Digest: mol-deacon-patrol

Patrol: TRACER BULLET SUCCESS - gt-oiv0 merged to main, furiosa completed and exited cleanly, 0 polecats now, all agents up


Phase 1.1: gt rig init creates .beads-ephemeral/

Add ephemeral beads repo creation to rig initialization.

## Implementation

In `gt rig init` (or equivalent setup):
1. Create `<rig>/.beads-ephemeral/` directory
2. Initialize as git repo
3. Create minimal beads config (no sync-branch needed)
4. Add to .gitignore if not already

## Config

```yaml
# .beads-ephemeral/config.yaml
ephemeral: true
# No sync-branch - ephemeral is local only
```

## Verification

```bash
gt rig init gastown
ls gastown/.beads-ephemeral/  # Should exist
```


Tmux status line: rig color themes and worker identity display

## Summary

Customize tmux status line for Gas Town workers with:
1. Per-rig configurable color themes
2. Clear worker name and role visibility

## Current Problem

- Only mayor shows in status line (and truncated)
- Can't tell which rig/worker you're looking at
- All sessions look the same

## Proposed Design

### Per-rig colors
```yaml
# In rig config or beads
theme:
  primary: '#ff6600'    # Orange for gastown
  secondary: '#333333'
  accent: '#ffcc00'
```

### Status line format
```
[gastown/Rictus] polecat | gt-70b3 | branch: polecat/Rictus
[beads/emma] crew | working | branch: main
[mayor] coordinator | idle
```

### Components
- Rig name with rig color
- Worker name
- Role (polecat/crew/mayor/witness/refinery)
- Current issue or status
- Branch name

## Configuration

Could use pinned beads for this (see gm-w13, beads-6v2):
- `bd show <rig>-theme` returns theme config
- Stored as pinned bead, always available
- Part of 'config in beads data plane' initiative

Implementation complete. Core features: per-rig color themes, dynamic status line with issue/mail indicators, gt theme/issue commands. Ready for testing.


Swarms of One: Lightweight single-worker task dispatch

Design and implement a lightweight pattern for firing off single workers to handle tasks without full swarm overhead.

## Context

Currently we have:
- town spawn: Creates a polecat in a rig with issue assignment
- Swarms (sw-*): Full lifecycle tracking with manifest, state, events, reports
- Ephemeral rigs (rig-*): Temporary worker groups for swarms

What's missing: A simple way to say 'fire off a worker to do X' without swarm ceremony.

## Design Questions

1. Should this be a new command like 'gt fire' or an option on existing commands?
2. Should single tasks still get swarm IDs (sw-N) for consistency/queryability?
3. Should it default to creating new workers or support --reuse for idle polecats?
4. How does this relate to crew workers (gt-cik)?

## Possible Interface

gt fire --rig gastown --issue gt-xyz [--prompt '...']
gt fire gastown/QuickTask --issue gt-xyz

## Related

- gt-cik: Overseer Crew (user-managed persistent workspaces)
- gt-kmn: Swarm System epic


Timed Beads: Scheduled recurring work

## Summary

Timed beads wake up periodically and get injected into the ready queue by the daemon.

## Schema Extension

```yaml
id: gt-weekly-sync
type: task  # or sentinel
schedule: "0 9 * * 1"  # cron: Monday 9am
# OR
interval: 24h          # every 24 hours
tier: haiku            # cheap model for routine checks
next_run: 2025-12-20T09:00:00Z
```

## Daemon Integration

Daemon heartbeat loop:
1. Check timed beads where `next_run <= now`
2. For each due bead:
   - Inject into ready queue (set status to open if needed)
   - Update `next_run` based on schedule/interval
3. Witnesses pick up work via `bd ready`

## Use Cases

- Weekly team sync reminders
- Daily health checks
- Periodic cleanup tasks
- Scheduled reports

## Interaction with Pinned Beads

A pinned bead can be timed - it wakes up periodically but never closes.
This is how you model "background services" in Gas Town.


TODO: Detect cycles in molecule dependency graph

molecule.go:302 has a TODO to detect cycles in the dependency graph. Currently, cyclical dependencies could cause issues.


Work on gt-role-template: Refine witness/CLAUDE.md role t...

Work on gt-role-template: Refine witness/CLAUDE.md role template. Run 'bd show gt-role-template' to see the full issue.


Bug: refinery --foreground detects parent session as already running

When gt refinery start gastown runs:
1. Creates tmux session gt-gastown-refinery
2. Sends 'gt refinery start gastown --foreground' into the session
3. The foreground command checks HasSession() - finds the session it's inside
4. Returns 'already running' error

The foreground mode check should either:
- Skip the tmux session check (only check PID)
- Use a different indicator that the daemon loop is running
- Pass a flag to indicate we're being called from the background starter

Workaround: Manually run 'gt refinery start gastown --foreground' from a fresh session.


Swarm: ephemeral rig support

PGT has ephemeral rigs for swarms - temporary worker groups that are destroyed after landing.

Missing Features:
- gt swarm init [--rig <name>|--git-url <url>] [--num-workers N]
- gt swarm worker add/remove/list <rig-id>
- gt swarm rigs - List ephemeral rigs
- gt swarm destroy <rig-id> - Destroy ephemeral rig

Directory structure:
<workspace>/mayor/workers/<rig-id>/
├── rig.json (metadata)
├── alice/ (git clone)
├── bob/
└── carol/

PGT Reference: gastown-py/src/gastown/ephemeral.py

Note: Beads issue gt-kmn.12 mentions this but implementation is missing.


Design molecule parameterization

Enable protos to accept parameters for customization.

## Use Cases

1. rig-spinup needs rig name: `gt sling rig-spinup --param rig=newproject`
2. agent-restart needs agent: `gt sling agent-restart --param agent=gastown/witness`
3. code-review needs scope: `gt sling code-review --param scope=src/auth/`

## Proposed Syntax

### In Proto

```markdown
## Step: create-rig-structure
mkdir -p ~/gt/${rig}/refinery ~/gt/${rig}/witness
```

### In Sling

```bash
gt sling rig-spinup mayor/ --param rig=newproject --wisp
```

### In Bonded Molecule

Interpolation happens at bond time. Step descriptions have concrete values.

## Implementation

1. Proto declares params in frontmatter: `params: [rig]`
2. gt sling validates required params provided
3. bd mol bond receives params, interpolates descriptions
4. Bonded molecule has concrete step text

## Edge Cases

- Missing required param → error
- Unused param → warning
- Param in step title → interpolate there too


bd sync --from-main: fresh sync from main branch

## Summary

Add `--from-main` flag to `bd sync` to pull fresh beads state from main branch.

## Use Case

When starting a patrol or fresh session, agent wants clean beads state:
```bash
bd sync --from-main    # Pull latest from origin/main, ignore local changes
```

## Behavior

1. Fetch origin/main
2. Reset local .beads/ to match origin/main
3. Rebuild SQLite DB from fresh JSONL

Useful for polecats/crew starting work to avoid stale state.


gt session restart/status: Complete session management

Add missing session subcommands:

- gt session restart <rig> <polecat> - Restart a session (stop + start)
- gt session status <rig> <polecat> - Show session status details

status should show:
- Running state
- Uptime
- Current activity
- Last output timestamp


mol-polecat-lease: Semaphore proto for tracking polecat lifecycle

Define a small proto for tracking a single polecat in the Witness patrol wisp:

```markdown
## Molecule: polecat-lease
Semaphore tracking a single polecat's lifecycle.
Vars: {{polecat}}, {{issue}}

## Step: boot
Spawned. Verify it starts working.
gt peek {{polecat}} - if idle, gt nudge.
Timeout: 60s before escalation.

## Step: working
Actively working. Monitor for stuck.
Wait for SHUTDOWN mail.
Needs: boot

## Step: done
Exit received. Ready for cleanup.
Kill session, prune worktree.
Needs: working
```

Used by Witness: bd mol bond mol-polecat-lease wisp-patrol --var polecat=X


Remove redundant gt prime SendKeys from crew commands

The crew commands (gt crew at, gt crew restart) still send 'gt prime' via SendKeys after session creation:
- internal/cmd/crew_at.go:97, 121
- internal/cmd/crew_lifecycle.go:202

This is now redundant because SessionStart hook handles priming automatically.

**Low priority** - these aren't causing bugs (just duplicate work), unlike the spawn race condition that was fixed. Can be cleaned up when convenient.


Doctor check: Zombie session cleanup

Detect and clean up zombie tmux sessions via gt doctor.

## Problem

Zombie sessions occur when:
- Agent crashes without cleanup
- gt kill fails mid-operation
- System restart leaves orphan sessions
- Session naming collision

## Checks

### ZombieSessionCheck
- List all tmux sessions matching gt-* pattern
- Cross-reference with known polecats
- Flag sessions with no corresponding polecat state
- Flag sessions for removed polecats
- Check session age vs polecat creation time

### Detection Criteria
- Session exists but polecat directory doesn't
- Session name doesn't match any registered polecat
- Polecat state=idle but session running
- Multiple sessions for same polecat

## Output

```
[WARN] Zombie tmux sessions detected:
  - gt-wyvern-OldPolecat (polecat removed)
  - gt-beads-Unknown (no matching polecat)
  - gt-wyvern-Toast (duplicate session)

  Run 'gt doctor --fix' to clean up
```

## Auto-Fix (--fix flag)

- Kill orphan tmux sessions
- Update polecat state to match reality
- Log all cleanup actions

## Safety

- Never kill sessions where polecat state=working
- Prompt before killing if --fix used without --force
- Create audit log of killed sessions


Auto-target: MRs for epic children target integration branch

Automatically target integration branches for epic children.

When 'gt mq submit' is called:
1. Parse source issue from branch
2. Check if issue has a parent epic
3. Check if integration/<epic> branch exists
4. If yes: set target=integration/<epic>
5. If no: set target=main

This ensures batch work automatically flows to integration branches.

Also update 'gt mq submit --epic' to explicitly target an epic's integration branch.

Reference: docs/merge-queue-design.md#integration-branches


CLI: spawn command

High-level command to spawn a polecat with work assignment.

## Command

```
gt spawn <rig>/<polecat> --issue <id>
gt spawn <rig> --issue <id>  # auto-select available polecat
gt spawn <rig>/<polecat> -m "Work on X"  # free-form task
```

## What It Does

1. Select or create polecat
2. Ensure polecat is in idle/active state
3. Assign the issue (update beads, set polecat state)
4. Start session (gt session start)
5. Inject initial context

## Options

- `--issue <id>`: Beads issue to assign
- `-m "message"`: Free-form work description
- `--create`: Create polecat if it does not exist
- `--no-start`: Assign work but do not start session

## Auto-Select Logic

If polecat not specified:
1. Look for idle polecats in rig
2. Prefer ones that worked on similar issues before
3. If none available, fail (or create if --create)

## Initial Context

Injects into session:
```
[SPAWN] You have been assigned: <issue-title>
Issue: <id>
Priority: <priority>

<description>

Work on this issue. Signal DONE when complete.
```

## Implementation

Orchestrates PolecatManager + SessionManager + Beads:
```go
func Spawn(rig, polecat, issue string, opts SpawnOptions) error
```


Merge: gt-3x0z.1

branch: polecat/furiosa
target: main
source_issue: gt-3x0z.1
rig: gastown


mol-outpost-assign: Intelligent work routing to outposts

The federation design shows outposts.yaml with a static policy section. Simple preference ordering is fine as config, but intelligent work routing should be a molecule.

Current static approach:
```yaml
policy:
  default_preference: [local, gce-burst, cloudrun-burst]
```

Cases requiring cognition:
- "This is a long-running research task, route to VM not CloudRun"
- "This touches sensitive code, keep local"
- "These 5 issues are related, batch them to same outpost"
- "CloudRun cost is high today, prefer local even if slower"

## Molecule: outpost-assign
Intelligent work-to-outpost routing.

## Step: classify-work
Analyze the issue/work item:
- Expected duration (quick fix vs multi-hour)
- Resource requirements
- Sensitivity/security tier
- Related work (same epic?)

## Step: check-capacity
Query outpost status:
- Current load on each
- Cost accrued today
- Health status

## Step: select-outpost
Choose optimal outpost based on:
- Work classification
- Capacity/cost
- Policy constraints
Needs: classify-work, check-capacity

## Step: emit-assignment
Record decision in beads for audit.
Needs: select-outpost

## Notes
- This molecule is invoked by Mayor/Witness when spawning
- Simple cases can short-circuit to static policy
- Full analysis only for ambiguous cases


mol-christmas-launch: 3-day execution plan

---

## Wisp Integration Wave Plan (added 2025-12-21)

Dependency-ordered execution for gt-3x0z (Wisp Molecules) + gt-rana (Patrol System):

### Wave 1 (parallel - no blockers)
- gt-3x0z.1: gt rig init creates .beads-ephemeral/
- gt-3x0z.2: Configure bd for ephemeral molecule bonding
- gt-3x0z.3: gt doctor checks for ephemeral health
- gt-rana.1: Attachment field on pinned beads
- gt-rana.3: mol-deacon-patrol definition

### Wave 2 (after Wave 1)
- gt-3x0z.4: gt spawn --molecule bonds ephemeral (GATE 1)
- gt-rana.2: Daemon attachment detection

### Wave 3-5 (sequential)
- gt-3x0z.5, gt-3x0z.6 → gt-3x0z.7 → gt-3x0z.8 (GATE 2: squash)

### Wave 6+ (patrol integration)
- gt-rana.4: Basic patrol runner (needs gt-rana.3 + gt-3x0z.8)
- gt-3x0z.9: mol-deacon-patrol uses wisp (needs gt-rana.3 + gt-3x0z.8)
- Then: gt-rana.5-7, gt-3x0z.10-12

### Key Gates
1. gt-3x0z.4 - spawn/bond unlocks Phase 2
2. gt-3x0z.8 - squash unlocks patrol integration
3. gt-rana.4 - patrol runner unlocks Phase 2+ patrol


Consolidate configuration architecture: three-tier model

Rationalize Gas Town's scattered configuration into a clean three-tier model:

## Current Problems
- Config split across mayor/, .gastown/, and rig/config.json
- Runtime state mixed with configuration
- Hidden directories (.gastown/) are missed by agents
- Category confusion: identity vs config vs runtime state

## Proposed Architecture

### Tier 1: Town Config (mayor/)
```
mayor/
├── town.json      # Town identity (unchanged)
├── rigs.json      # Rig registry (unchanged)
└── config.json    # NEW: Town-level configuration
    # theme defaults, daemon settings, etc.
```

### Tier 2: Town Runtime (.runtime/)
```
~/gt/.runtime/                    # NEW: Gitignored
├── daemon.json                   # {pid, started_at, heartbeat}
├── deacon.json                   # {cycle, last_action}
└── agent-requests.json           # Lifecycle requests
```

### Tier 3: Rig Config (settings/)
```
<rig>/
├── config.json                   # Rig identity only (type, git_url, beads.prefix)
├── settings/                     # NEW: Visible, git-tracked
│   ├── config.json               # theme, merge_queue, max_workers
│   ├── namepool.json             # pool settings (style, max)
│   └── roles/                    # Per-role overrides (optional)
└── .runtime/                     # NEW: Gitignored
    ├── witness.json              # {state, started_at, stats}
    ├── refinery.json             # {state, started_at, stats}
    └── namepool-state.json       # {in_use, overflow_next}
```

## Key Principles
1. **Visible > Hidden** for config agents need to find
2. **Git-tracked** for identity and config; **gitignored** for runtime
3. **Separation of concerns**: identity, config, runtime are distinct
4. **Locality**: town config at town root, rig config at rig root

## Migration
- Move .gastown/ contents to appropriate new locations
- Update all code that reads/writes these files
- Update .gitignore patterns
- Update documentation (architecture.md, CLAUDE.md)


Merge: gt-caih

branch: polecat/furiosa
target: main
source_issue: gt-caih
rig: gastown


P0: Multiple agents can claim same worker identity

Multiple Claude Code sessions running simultaneously all think they are 'dave' on beads/crew/dave. No detection or prevention of identity collision. This breaks the single-agent-per-worker assumption.

## Fix Implemented

1. **Lock Package** (`internal/lock/lock.go`):
   - PID-based lockfile at `<worker>/.gastown/agent.lock`
   - Contains PID, timestamp, session ID, hostname
   - Stale lock detection (checks if owning PID is dead)

2. **Prevention in gt prime**:
   - Workers (crew/polecat) acquire identity lock before loading context
   - If another live process holds the lock, prime fails with clear error
   - Shows lock holder details and resolution steps

3. **Detection with gt agents**:
   - `gt agents check` - scans for collisions and stale locks
   - `gt agents fix` - cleans stale locks
   - JSON output available for patrol tooling

4. **Correction in gt doctor**:
   - New `identity-collision` check
   - `gt doctor --fix` cleans stale locks


Deacon event/timer callbacks: reactive triggers

Implement event-triggered and timer-based callbacks in the Deacon.

## Timer Callbacks

Agents can schedule future wakes by mailing the Deacon:
```
Subject: TIMER: gastown/witness wake at 2025-12-20T16:00:00Z
Body: Please nudge me - I'm waiting for external dependency
```

Deacon processing:
1. Parse timer mail
2. Check if time has passed
3. If yes: mail the agent "WAKE: Timer fired"
4. Close the timer mail

## Event Subscriptions

Plugins/agents can subscribe to events:
```yaml
# In kernel bead or plugin config
event_triggers:
  - event: "issue.created"
    action: mail
    target: "plugins/work-oracle"

  - event: "mr.submitted"
    action: run
    plugin: "review-oracle"

  - event: "agent.stuck"
    action: escalate
    target: human
```

## Event Sources

Events come through mail to deacon/:
```
Subject: EVENT: issue.created gt-abc123
Body: New issue created in gastown rig
```

## Event Types

Initial event types:
- `issue.created` - New bead created
- `issue.closed` - Bead closed
- `mr.submitted` - Merge request submitted
- `mr.merged` - Merge request merged
- `agent.stuck` - Agent appears stuck (from health scan)
- `agent.failed` - Agent remediation failed

## Event Processing

During events step:
1. Read event mail from inbox
2. Match against subscriptions
3. Execute actions:
   - `mail`: Send mail to target
   - `run`: Execute plugin inline
   - `spawn`: Spawn subagent for plugin
   - `escalate`: Mail human

## Relation to Mail

Mail IS the event bus. No separate event system.
Events are just specially-formatted mail to deacon/.


CLI: rig commands (list, show, add)

Rig management CLI commands.

## Commands

### gt rig list
List all registered rigs.
```
gt rig list [--json]
```
Output:
- Rig name
- Git URL
- Polecat count
- Witness/Refinery status

### gt rig show
Show details for a specific rig.
```
gt rig show <name> [--json]
```
Output:
- Full rig info
- Polecats with status
- Recent activity
- Beads summary (open issues)

### gt rig add
Add a new rig to the town.
```
gt rig add <name> <git-url>
gt rig add <name> --local <path>
```
Steps:
- Clone repo to town root (or link local)
- Register in rigs.json
- Create agent directories
- Configure git exclude

### gt rig remove
Remove a rig from the town.
```
gt rig remove <name> [--force]
```
- Warns if active polecats
- --force required if uncommitted changes

## Implementation

```go
var rigCmd = &cobra.Command{Use: "rig"}
rigCmd.AddCommand(rigListCmd, rigShowCmd, rigAddCmd, rigRemoveCmd)
```


Document session cycling protocol in all templates

Add explicit lifecycle request protocol to all agent templates.

## Problem
Templates mention 'request session refresh' but don't show HOW.
Agents don't know the protocol for requesting a cycle.

## Protocol to document
1. Write handoff mail to self (for continuity)
2. Set requesting_cycle=true in state.json
3. Send LIFECYCLE mail to deacon/:
   Subject: 'LIFECYCLE: <role> requesting cycle'
   Body: Reason for cycle request

## Templates to update
- prompts/roles/polecat.md
- prompts/roles/crew.md
- prompts/roles/witness.md
- prompts/roles/refinery.md

## Also add
- Example state.json location for each role
- When to request cycle (context full, work complete, etc.)
- What happens after (daemon kills, respawns, new session primes)


Witness MVP: Automated Polecat Lifecycle

Implement the Witness agent - per-rig 'pit boss' that manages polecat lifecycles.

The Witness enables hands-free swarming by automating:
- Spawning polecats for ready work
- Monitoring worker health
- Processing shutdown requests
- Cleaning up worktrees when done
- Escalating stuck workers to Mayor

Without Witness, humans must manually spawn, monitor, and kill each polecat.

## Core Loop

```
while True:
  # Handle pending shutdowns
  for polecat in polecats where state == pending_shutdown:
    verify git clean
    kill session
    remove worktree
    delete branch

  # Spawn for ready work
  ready = bd ready --parent=<epic> if epic else bd ready
  for issue in ready:
    if active_workers < max_workers:
      gt spawn --issue <id>

  # Check worker health
  for polecat in active polecats:
    if stuck (no progress for 30 min):
      nudge or escalate

  sleep 60
```

## Blocking Bugs to Fix
- gt-dsfi: handoff deadlock
- gt-n7z7: refinery foreground race condition
- gm-c6b: mail coordination (town vs rig beads)


Engineer session restart protocol

Implement session restart flow for when the Engineer needs to split work:

1. Engineer creates subtask(s) in Beads assigned to self
2. Engineer sends handoff mail to self (🤝 HANDOFF)
3. Engineer sends restart request to Witness
4. Witness verifies:
   - Handoff mail exists in Engineer outbox/sent
   - Subtasks filed in Beads
5. Witness restarts the Refinery session (new Engineer context)

This enables "occasionally consistent, eventually convergent" work patterns.
The Refinery continues; the Engineer gets fresh context.


Merge: gt-70b3

type: merge-request
branch: polecat/Rictus
target: main
source_issue: gt-70b3
rig: gastown


town handoff command (optional)

CLI commands for session handoff workflow (optional convenience).

## Commands

### gt handoff
Generate handoff interactively.
```
gt handoff [--send]
```
- Collects current state (status, inbox, beads)
- Prompts for additional notes
- --send: Mail to self and exit

### gt resume
Check for and display pending handoff.
```
gt resume
```
- Checks inbox for handoff message
- Displays formatted handoff if found
- Suggests next actions

## Implementation

These are convenience wrappers. The same workflow can be done manually:
```bash
# Manual handoff
town status > /tmp/handoff
town inbox >> /tmp/handoff
bd ready >> /tmp/handoff
# Edit and send
town mail send mayor/ -s "Session Handoff" -f /tmp/handoff
```

## Priority

P2 - Optional. Manual workflow works fine. Nice to have for UX.

## Notes

Part of session cycling workflow designed in gt-u82.


Create mol-install-go-binary molecule

Create a single-step molecule for building and installing the gt binary.

## Molecule Definition
\`\`\`markdown
## Molecule: install-go-binary
Single step to rebuild and install the gt binary after code changes.

## Step: install
Build and install the gt binary locally.

Run from the rig directory:
\`\`\`
go build -o gt ./cmd/gt
go install ./cmd/gt
\`\`\`

Verify the installed binary is updated:
\`\`\`
which gt
gt --version  # if we have version command
\`\`\`
\`\`\`

## Implementation
1. Add to builtin_molecules.go
2. Update SeedBuiltinMolecules to include it
3. Run gt molecule seed

## Acceptance
- [ ] mol-install-go-binary exists in beads
- [ ] Can be instantiated standalone
- [ ] Can be included by other molecules


Recover stale polecat work: 4 branches with unpushed commits

During observation of polecat workflow, found 4 polecats with unpushed work:

## Branches Pushed (preserved)
- polecat/capable: 3 commits (molecule catalog, doctor orphan detection, gt done)
- polecat/dementus: 4 commits (Witness MVP, handoff fixes)
- polecat/furiosa: 2 commits (bulk polecat removal, spawn handoff)
- polecat/rictus: 1 commit (molecule docs)

## Action Required
1. Review each branch for merge-worthiness
2. Either:
   a. Create PRs for valuable work
   b. OR discard if superseded
3. After decision, clean up polecats properly

## Root Cause
Polecats were not cleaned up after previous work sessions. This is exactly why we need:
- gt-u1k: gt shutdown should fully cleanup polecats
- gt-8v8: Refuse to lose uncommitted work
- gt-9nf: Always create fresh polecats


HOP: Skill vectors on work items

Add skill embeddings to work items for capability-based matching. See ~/ai/stevey-gastown/hop/CONTEXT.md. Post-v0.1 work.


Clarify Mayor vs Witness cleanup responsibilities

Document the cleanup authority model: Witness owns ALL per-worker cleanup, Mayor never involved.

## The Rule

**Witness handles ALL per-worker cleanup. Mayor is never involved.**

## Why This Matters

1. Separation of concerns: Mayor strategic, Witness operational
2. Reduced coordination overhead: No back-and-forth for routine cleanup
3. Faster shutdown: Witness kills workers immediately upon verification
4. Cleaner escalation: Mayor only hears about problems

## What Witness Handles

- Verifying worker git state before kill
- Nudging workers to fix dirty state
- Killing worker sessions
- Updating worker state (sleep/wake)
- Logging verification results

## What Mayor Handles

- Receiving swarm complete notifications
- Deciding whether to start new swarms
- Handling escalations (stuck workers after 3 retries)
- Cross-rig coordination

## Escalation Path

Worker stuck -> Witness nudges (up to 3x) -> Witness escalates to Mayor -> Mayor decides: force kill, reassign, or human

## Anti-Patterns

DO NOT: Mayor asks Witness if worker X is clean
DO: Witness reports swarm complete, all workers verified

DO NOT: Mayor kills worker sessions directly
DO: Mayor tells Witness to abort swarm, Witness handles cleanup

DO NOT: Workers report done to Mayor
DO: Workers report to Witness, Witness aggregates and reports up


Agent monitoring and status inference

Agent monitoring with status inference from activity, like PGT.

## Agent Status Enum
```go
type AgentStatus string
const (
    StatusAvailable AgentStatus = "available"
    StatusWorking   AgentStatus = "working"
    StatusThinking  AgentStatus = "thinking"
    StatusBlocked   AgentStatus = "blocked"
    StatusWaiting   AgentStatus = "waiting"
    StatusReviewing AgentStatus = "reviewing"
    StatusIdle      AgentStatus = "idle"
    StatusPaused    AgentStatus = "paused"
    StatusError     AgentStatus = "error"
    StatusOffline   AgentStatus = "offline"
)
```

## Status Sources (priority order)
```go
type StatusSource string
const (
    SourceBossOverride StatusSource = "boss"      // Witness/Mayor sets
    SourceSelfReported StatusSource = "self"      // Agent reports own status
    SourceInferred     StatusSource = "inferred"  // Detected from activity
)
```

## Activity Detection

### Pattern Registry
```go
var activityPatterns = []struct {
    Pattern string
    Status  AgentStatus
}{
    {"Thinking...", StatusThinking},
    {"BLOCKED:", StatusBlocked},
    {"Error:", StatusError},
    // etc
}
```

### Idle Detection
No pane output for N seconds → StatusIdle

### Resource Monitoring (optional)
CPU/memory via os.Process

## New Package
internal/monitoring/
├── types.go      # AgentStatus, StatusReport
├── detector.go   # PatternRegistry, detect from output
├── tracker.go    # Per-agent status tracking
└── idle.go       # Idle timeout detection

## Integration
- Session capture output → monitoring detector
- Status shown in gt status, gt session list

## PGT Reference
gastown-py/src/gastown/monitoring/

## Acceptance Criteria
- [ ] Status enum with 10 states
- [ ] Pattern-based detection from pane output
- [ ] Idle detection with configurable timeout
- [ ] Status visible in CLI output


Phase 2: Quiescent agents (Witness, Refinery)

Enable Witness and Refinery to sleep until triggered.

## Scope
- Wake triggers: gt spawn, MR submit, mail, Deacon ping
- Wake SLA: <1 minute
- mol-witness-patrol and mol-refinery-patrol definitions
- Quiescent entry/exit protocol

## Implementation
- Kill tmux session on quiescent entry
- Preserve sandbox (worktree, state files)
- Restart session on wake trigger
- Agent checks pinned, spawns default patrol if naked

Depends: Phase 1 complete


Merge: gt-cp2s

branch: polecat/rictus
target: main
source_issue: gt-cp2s
rig: gastown


ensure-witnesses

Parallel container: Start all rig witnesses.

## Execution
Children execute in parallel. Container completes when all children complete.

## Children
- ensure-gastown-witness
- ensure-beads-witness

## Verify
All child witness steps pass verification.


CloudRun cost tracking: Usage monitoring and limits

## Overview

Track Cloud Run usage costs and enforce spending limits.

## Cost Model

Cloud Run pricing (approximate):
- CPU: ~$0.000024/vCPU-second
- Memory: ~$0.0000025/GiB-second
- Requests: ~$0.40/million

For 5-minute worker (2 vCPU, 4GB):
- CPU: 300 × 2 × $0.000024 = $0.0144
- Memory: 300 × 4 × $0.0000025 = $0.003
- **Total: ~$0.017 per session**

## Implementation

```go
type CostTracker struct {
    cpuRate    float64  // per vCPU-second
    memRate    float64  // per GiB-second
    sessions   []SessionCost
    mu         sync.RWMutex
}

type SessionCost struct {
    WorkerID  string
    StartTime time.Time
    EndTime   time.Time
    CPUs      float64
    MemoryGiB float64
}

func (t *CostTracker) RecordSession(workerID string, start, end time.Time, cpus, mem float64) {
    t.mu.Lock()
    defer t.mu.Unlock()
    t.sessions = append(t.sessions, SessionCost{...})
}

func (t *CostTracker) CurrentCost() float64 {
    t.mu.RLock()
    defer t.mu.RUnlock()
    var total float64
    for _, s := range t.sessions {
        duration := s.EndTime.Sub(s.StartTime).Seconds()
        total += duration * s.CPUs * t.cpuRate
        total += duration * s.MemoryGiB * t.memRate
    }
    return total
}
```

## Cost Cap Enforcement

```go
func (o *CloudRunOutpost) Spawn(...) (Worker, error) {
    if o.costCap > 0 && o.costTracker.CurrentCost() >= o.costCap {
        return nil, ErrCostCapExceeded
    }
    // ... spawn worker
}
```

## Config

```yaml
outposts:
  - name: cloudrun-burst
    type: cloudrun
    cost_cap_hourly: 5.00   # Stop spawning if hourly cost exceeds $5
    cost_cap_daily: 50.00   # Daily limit
```

## CLI

```bash
gt outpost status cloudrun-burst
# Shows: Cost (today): $0.42 / $50.00 cap
```

## Files

- `internal/cloudrun/cost.go`

## Dependencies

Depends on: gt-9a2.8 (basic CloudRunOutpost)


Built-in molecules: engineer-in-box, quick-fix, research

Create built-in molecules as Beads issues:

## engineer-in-box

```markdown
id: mol-engineer-in-box
type: molecule
title: Engineer in a Box

Full workflow from design to merge.

## Step: design
Think carefully about architecture. Consider:
- Existing patterns in the codebase
- Trade-offs between approaches
- Testability and maintainability

Write a brief design summary before proceeding.

## Step: implement
Write the code. Follow codebase conventions.
Needs: design

## Step: review
Self-review the changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
Needs: implement

## Step: test
Write and run tests. Cover happy path and edge cases.
Fix any failures before proceeding.
Needs: implement

## Step: submit
Submit for merge via refinery.
Needs: review, test
```

## quick-fix

```markdown
id: mol-quick-fix
type: molecule
title: Quick Fix

Fast path for small changes.

## Step: implement
Make the fix. Keep it focused.

## Step: test
Run relevant tests. Fix any regressions.
Needs: implement

## Step: submit
Submit for merge.
Needs: test
```

## research

```markdown
id: mol-research
type: molecule
title: Research

Investigation workflow.

## Step: investigate
Explore the question. Search code, read docs,
understand context. Take notes.

## Step: document
Write up findings. Include:
- What you learned
- Recommendations
- Open questions
Needs: investigate
```

## Storage

Built-in molecules live in `<town>/.beads/` as regular issues.
Created during `gt install` or `bd init`.


gt uninstall: Clean removal of Gas Town harness

Add 'gt uninstall' command to cleanly remove a Gas Town installation.

Should:
- Remove harness directory structure
- Optionally preserve rigs/data with --keep-data flag
- Warn about running sessions
- Clean up any global config references


working

Actively working. Monitor for stuck.

The polecat is processing its assigned issue ({{issue}}).
Monitor via peek. Watch for:
- Progress on commits
- Status updates in beads
- SHUTDOWN mail when done

Wait for SHUTDOWN signal from the polecat.
Variables: {{polecat}}, {{issue}}


gt handoff: Deadlock bug in runHandoff

Running 'gt handoff' from a polecat causes a deadlock:

Stack trace shows:
- goroutine 1 [select (no cases)] in runHandoff
- File: internal/cmd/handoff.go:125

The command successfully sends the shutdown request but then hangs with 'fatal error: all goroutines are asleep - deadlock!'


CloudRunOutpost: Basic implementation

## Overview

Basic CloudRunOutpost implementation. Persistent connections and cost tracking are separate tasks.

## Implementation

```go
type CloudRunOutpost struct {
    name        string
    project     string
    region      string
    service     string
    maxWorkers  int
    client      *WorkClient
    workers     map[string]*CloudRunWorker
    mu          sync.RWMutex
}

func NewCloudRunOutpost(cfg OutpostConfig) (*CloudRunOutpost, error) {
    serviceURL := fmt.Sprintf(
        "https://%s-%s.a.run.app",
        cfg.Service, cfg.Region,
    )
    return &CloudRunOutpost{
        name:       cfg.Name,
        project:    cfg.Project,
        region:     cfg.Region,
        service:    cfg.Service,
        maxWorkers: cfg.MaxWorkers,
        client:     NewWorkClient(serviceURL),
        workers:    make(map[string]*CloudRunWorker),
    }, nil
}
```

## Spawn

```go
func (o *CloudRunOutpost) Spawn(issue string, cfg WorkerConfig) (Worker, error) {
    req := WorkRequest{
        IssueID: issue,
        Rig:     RigConfig{URL: cfg.RigURL, Branch: cfg.GitBranch},
        Beads:   BeadsConfig{URL: cfg.BeadsURL, Branch: "beads-sync"},
        Branch:  "polecat/" + issue,
    }

    events, err := o.client.DispatchWork(context.Background(), req)
    if err != nil {
        return nil, err
    }

    worker := &CloudRunWorker{
        id:      uuid.New().String(),
        outpost: o.name,
        issue:   issue,
        events:  events,
        status:  WorkerStatusWorking,
    }

    o.mu.Lock()
    o.workers[worker.id] = worker
    o.mu.Unlock()

    go worker.monitor()
    return worker, nil
}
```

## CloudRunWorker

```go
type CloudRunWorker struct {
    id      string
    outpost string
    issue   string
    status  WorkerStatus
    events  <-chan WorkEvent
    logs    []string
}

func (w *CloudRunWorker) Attach() error {
    return errors.New("Cloud Run workers do not support attach")
}

func (w *CloudRunWorker) Logs() (io.Reader, error) {
    return strings.NewReader(strings.Join(w.logs, "\n")), nil
}
```

## Files

- `internal/outpost/cloudrun.go`

## Dependencies

Depends on: gt-9a2.1 (interfaces), gt-9a2.12 (HTTP client)
Blocks: gt-9a2.13 (persistent connections), gt-9a2.14 (cost tracking)


ensure-gastown-refinery

Start the gastown rig Refinery.

## Action
```bash
gt refinery start gastown
```

## Verify
1. Session exists: `tmux has-session -t gastown-refinery 2>/dev/null`
2. Not stalled: `gt peek gastown/refinery` does NOT show "> Try" prompt
3. Queue processing: Refinery can receive merge requests

## OnStall
```bash
gt nudge gastown/refinery "Start patrol."
sleep 30
# Re-verify
```

## OnFail
Log error. Completed polecat work will queue until Refinery recovers.


CLI: session commands (start, stop, at, list, capture, inject)

Session management CLI commands.

## Commands

### gt session start
Start a polecat session.
```
gt session start <rig>/<polecat> [--issue <id>]
```
- Creates tmux session
- Launches claude in polecat workdir
- Optionally injects initial issue context

### gt session stop
Stop a polecat session.
```
gt session stop <rig>/<polecat> [--force]
```
- Graceful shutdown by default
- --force kills immediately

### gt session at (attach)
Attach to running session.
```
gt session at <rig>/<polecat>
```
- Attaches tmux session to current terminal
- Detach with Ctrl-B D

### gt session list
List all sessions.
```
gt session list [--rig <rig>] [--json]
```
- Shows running/stopped status
- Optionally filter by rig

### gt session capture
Capture recent output from session.
```
gt session capture <rig>/<polecat> [--lines <n>]
```
- Default: last 100 lines
- Useful for checking polecat progress

### gt session inject
Send message to session.
```
gt session inject <rig>/<polecat> -m "message"
gt session inject <rig>/<polecat> -f <file>
```
- Injects text via tmux send-keys
- Used for nudges, notifications

## Address Format

`<rig>/<polecat>` e.g., `wyvern/Toast`

## Implementation

Session subcommand group:
```go
var sessionCmd = &cobra.Command{Use: "session"}
sessionCmd.AddCommand(startCmd, stopCmd, atCmd, listCmd, captureCmd, injectCmd)
```


Daemon: configurable heartbeat interval

Heartbeat interval is hardcoded to 60s. Should be configurable via:
- town.json config
- Command line flag
- Environment variable

Default 60s is reasonable but some deployments may want faster/slower.


Remove bd sync instruction from polecat startup workflow

Polecats are instructed to run `bd sync --from-main` on startup (spawn.go:634).

## Problem
- Spawn command already syncs beads before spawning (line 239)
- Polecats share rig-level beads via `.beads/redirect`
- Multiple polecats starting simultaneously all try to sync same shared beads
- This causes git conflicts/failures when many polecats spawn at once

## Observed
User reported: 'all polecats failing on beads sync on startup in one run'

## Fix
Remove line 634 from buildWorkAssignmentMail():
```
body.WriteString("2. Run \`bd sync --from-main\` to get fresh beads\n")
```

Polecats only need to sync at END of work (already in steps 5/7).

## Files
- internal/cmd/spawn.go: buildWorkAssignmentMail() and buildSpawnContext()


Merge: gt-tnca.1

branch: polecat/immortan
target: main
source_issue: gt-tnca.1
rig: gastown


Human escalation: notify overseer when self-heal fails

Lightweight escalation extracted from Deacon epic (gt-5af).

**Implementation**: Config in town.json or similar:
```yaml
escalation:
  contact: steve@example.com  # or slack webhook
  triggers:
    - daemon_cant_restart
    - session_missing_5min
```

**Trigger points**:
- Go daemon can't restart a session after N attempts
- Agent detects it's stuck and can't recover
- Witness can't reach polecat

**Mechanism**:
- Simple: `gt mail send --human` already exists
- Enhanced: email/slack via external script

**Weight**: Small config + one code path in daemon
**Value**: High for unattended operation - human gets notified instead of silent failure


Merge: gt-j6s8

branch: polecat/dementus
target: main
source_issue: gt-j6s8
rig: gastown


mol-ready-work: graceful GitHub/label handling

## Summary

mol-ready-work assumes:
- GitHub repo exists with gh CLI configured
- Labels 'untriaged' and 'triaged' exist

Should handle gracefully:
1. No GitHub repo (beads-only project) → skip GH backlogs
2. Missing labels → skip that backlog tier, don't error
3. gh CLI not authenticated → warn and skip GH backlogs

## Implementation
Add checks in scan-backlogs step:
```bash
# Check if gh is available and authenticated
if gh auth status &>/dev/null; then
  # scan GH backlogs
fi
```

## Parent
Part of gt-tnca (mol-ready-work epic)


Add agent abstraction layer to support non-Claude agents

Currently Gas Town hardcodes 'claude --dangerously-skip-permissions' throughout the codebase for spawning agents. We should add an abstraction layer to support other AI agents (e.g., Gemini CLI, OpenAI agents, local models).

Locations that spawn Claude:
- internal/cmd/mayor.go:131
- internal/cmd/deacon.go:150
- internal/cmd/witness.go:280
- internal/cmd/crew.go (multiple locations)
- internal/cmd/up.go:190, 229
- internal/session/manager.go:146
- internal/refinery/manager.go:207

Suggested approach:
1. Create an agent package with an interface
2. Add configuration for agent type in town/rig config
3. Replace hardcoded claude commands with agent.Spawn() calls
4. Support agents: claude, gemini, openai, local (ollama, etc.)


Digest: mol-deacon-patrol

Patrol: read mayor handoff (gt-mzal boot design), all agents up, furiosa working gt-oiv0, note: gt-4eim orphaned (angharad gone)


Error handling improvements: retry logic and recovery hints

Improve error handling across GGT codebase.

## Issues Found

### 1. Silent Failures in Refinery
manager.go ProcessMR():
- git pull errors ignored
- Continues processing even on partial failures

### 2. Missing Beads CLI
Many operations silently continue if `bd` not found:
```go
// Current
tasks, err := m.loadTasksFromBeads(epicID)
if err != nil {
    // Non-fatal - swarm can start without tasks
}

// Better
if err != nil {
    return nil, fmt.Errorf("beads required: %w", err)
}
```

### 3. No Retry Logic
Network/lock errors should retry:
```go
func withRetry(attempts int, delay time.Duration, fn func() error) error {
    for i := 0; i < attempts; i++ {
        if err := fn(); err == nil {
            return nil
        }
        time.Sleep(delay)
    }
    return fmt.Errorf("failed after %d attempts", attempts)
}
```

### 4. Recovery Hints
Error messages should include fix suggestions:
```go
// Current
return fmt.Errorf("polecat not found")

// Better
return fmt.Errorf("polecat '%s' not found. Use 'gt polecat list' to see available polecats", name)
```

## Domain Error Types
```go
type SessionError struct {
    Op      string
    Polecat string
    Err     error
}

func (e *SessionError) Error() string {
    return fmt.Sprintf("session %s for %s: %v", e.Op, e.Polecat, e.Err)
}
```

## Files to Review
- internal/refinery/manager.go
- internal/swarm/manager.go
- internal/session/manager.go
- All cmd/*.go files

## Acceptance Criteria
- [ ] No silent error swallowing
- [ ] Retry logic for transient failures
- [ ] Helpful error messages with hints
- [ ] Consistent error types per domain


Inconsistent error wrapping patterns

Error handling is inconsistent across the codebase:

1. Some functions use fmt.Errorf with %w for wrapping, others don't
2. return nil, nil patterns (40+ occurrences) sometimes represent 'not found' and sometimes 'error but continue' - should use sentinel errors
3. Some places return nil for errors when they should propagate them

Examples of nil,nil that might need review:
- internal/git/git.go:272, 308
- internal/crew/manager.go:227
- internal/witness/manager.go:517, 523, 530, 775
- internal/beads/beads.go:225, 492


BUG: gt done doesn't push branch to origin - work lost when worktree deleted

## Problem

`gt done` creates a merge-request record in beads but **never pushes the branch to origin**.

When polecats are cleaned up (worktrees deleted), the branch is lost forever. The MR record exists but there's no actual branch to merge.

## Evidence

12 MQ items had `ready` status but no corresponding branches on origin. All polecat worktrees were deleted, losing all work.

## Impact

**CRITICAL**: All polecat work is silently lost unless polecats manually push (which they don't know to do).

## Fix

In `done.go`, before creating the MR:
1. `git push origin <branch>` to push the branch to remote
2. Only create MR record if push succeeds

## Location
`mayor/rig/internal/cmd/done.go:124-135`


Design GGT prompt architecture

Audit PGT prompts and design canonical prompt system for GGT. Create docs/prompts.md with inventory, gap analysis, and Witness prompt design.


Success handling: close MR, close source issue, cleanup

Handle successful merge completion.

Steps:
1. Update MR with merge_commit SHA:
   bd update <id> --body='...\nmerge_commit: <sha>'
2. Close MR with reason:
   bd close <id> --reason='merged'
3. Close source issue (the work item):
   bd close <source_issue> --reason='Merged in <mr_id>'
4. Delete source branch (if configured):
   git push origin --delete <mr.branch>
5. Log success

Configuration:
- delete_merged_branches: bool (default true)

Reference: docs/merge-queue-design.md#process-merge-steps


Replaceable notifications via Claude Code queue

Leverage Claude Code's ability to replace queued text for notifications that supersede previous ones.

## Problem

If daemon sends 10 heartbeats while agent is busy, agent returns to see 10 stacked messages. Wasteful and noisy.

## Solution

Use Claude Code's queue replacement for:
- Heartbeat messages (only latest matters)
- Status updates that supersede previous
- Progress notifications

## Implementation

Notifications get a 'slot' identifier. New notification in same slot replaces old one:
- Slot: 'heartbeat' → only one heartbeat queued at a time
- Slot: 'status-<rig>' → latest status per rig
- No slot → stacks normally (for unique messages)

## Research Needed

- How does Claude Code expose queue replacement?
- tmux send-keys behavior with pending input
- Alternative: clear + resend pattern


Merge: gt-5af.2

branch: polecat/Doof
target: main
source_issue: gt-5af.2
rig: gastown


implement

Implement the solution for gt-test123. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


Implement bd mol bond --ephemeral flag

Add --ephemeral flag to bd mol bond command to support ephemeral molecule bonding.

## Context
Phase 1.2 of Wisp Molecule Integration (gt-3x0z.2) discovered that this flag doesn't exist.

## Requirements

1. Add --ephemeral flag to mol bond command
2. When --ephemeral is set:
   - Mark spawned issues with wisp=true
   - Optionally write to separate .beads-ephemeral/ storage (Phase 2)

## Architecture Reference
See gastown architecture.md lines 487-491 for the full ephemeral storage design.

## Related
- gt-3x0z.2: Configure bd for ephemeral molecule bonding (closed - blocked on this)


Refactor: Extract common manager creation boilerplate

Five nearly identical functions exist for creating managers:
- getPolecatManager (polecat.go:241)
- getSessionManager (session.go:183)
- getCrewManager (crew_helpers.go:44)
- getRefineryManager (refinery.go:116)
- getWitnessManager (witness.go:102)

All follow the same pattern: find workspace, load config, get rig, create manager. Should extract to a common helper that takes a factory function.


Work on ga-lue: Implement Witness as Claude agent. Conver...

Work on ga-lue: Implement Witness as Claude agent. Convert from shell script to Claude agent that monitors polecats, nudges idle ones, handles escalations. When done, submit MR (not PR) to integration branch for Refinery.


MQ dashboard widget: queue status in TUI

Add merge queue status widget to the Bubbletea TUI dashboard.

Display:
┌─────────────────────────────────────────────────┐
│              MERGE QUEUE STATUS                  │
├─────────────────────────────────────────────────┤
│ Pending: 3   In Progress: 1   Merged (24h): 12  │
├─────────────────────────────────────────────────┤
│ QUEUE:                                          │
│   ► gt-mr-004  P0  Nux/gt-xyz     Processing... │
│     gt-mr-005  P1  Toast/gt-abc   Ready         │
│     gt-mr-006  P1  Capable/gt-def Blocked (005) │
└─────────────────────────────────────────────────┘

Interactive features:
- Navigate queue entries
- View MR details
- Retry/reject from dashboard

Depends on: gt-u1j.2 (Bubbletea TUI dashboard)

Reference: docs/merge-queue-design.md#dashboard


Auto-rebase on conflict: optional automatic rebase

Implement automatic rebase as conflict resolution option.

When on_conflict=auto_rebase and conflicts detected:
1. Attempt: git rebase <target> <source-branch>
2. If clean rebase: update source branch, continue merge
3. If conflicts in rebase: abort, fall back to assign_back
4. Force push rebased branch (worker's branch)

Requires:
- Worker branch must be force-pushable
- Config: on_conflict: auto_rebase

Risks:
- Force push can confuse workers
- Complex conflicts still need manual resolution

Reference: docs/merge-queue-design.md#conflict-resolution-strategies


gt polecat remove --all: bulk polecat teardown

Currently gt polecat remove only accepts one polecat at a time. Need bulk operations:

## Requested
- `gt polecat remove gastown --all` - remove all polecats from a rig
- `gt polecat remove gastown/A gastown/B ...` - remove multiple by name

## Context
After a swarm completes, tearing down 20 polecats one at a time is tedious.
Ephemeral workers should be easy to create and destroy in bulk.

## Related
- gt-c92: CLI: all command for batch polecat operations


Digest: mol-deacon-patrol

Patrol: mayor handoff (Batch 1 complete, notifications working), 5 polecats now active (Batch 2)


TODO: Check if issue is child of configured epic in Witness

witness/manager.go:688 has a TODO to filter issues by whether they're children of the configured epic. Currently this filter is skipped.


Design: Mayor session cycling and handoff

Design for Mayor session cycling and structured handoff.

## Overview

Mayor coordinates across all rigs and runs for extended periods. Needs session cycling pattern with structured handoff notes.

## Key Elements

1. Session cycling recognition (when to cycle)
2. Handoff note format (structured state capture)
3. Handoff delivery (mail to self)
4. Fresh session startup (reading and resuming)

## Subtasks (implementation)

- gt-g2d: Mayor session cycling prompting
- gt-sye: Mayor startup protocol prompting
- gt-vci: Mayor handoff mail template
- gt-1le: town handoff command (optional, P2)

**Design complete.** Each subtask has full specification in its description.


gt rig reset --stale: Clear orphaned in_progress items

Reset in_progress issues when their assigned agent no longer exists.

## Problem
When polecats die without cleanup, their issues remain in_progress forever.
Need a way to bulk-reset these orphaned items.

## Command
```bash
gt rig reset --stale [--dry-run]
```

## Logic
For each in_progress issue in rig:
1. Parse assignee (e.g., "gastown/furiosa")
2. Map to tmux session name (gt-gastown-furiosa)
3. If session does NOT exist:
   - Reset status to "open"
   - Clear assignee
4. Exception: skip crew/* assignees (persistent identities)
   OR check if crew tmux session exists

## Output
```
Resetting stale work in gastown:
  gt-abc: gastown/furiosa (no session) → open
  gt-def: gastown/nux (no session) → open
  Skipped: gt-xyz: gastown/crew/max (persistent)
Reset 2 issues, skipped 1
```

## Related
- gt-2kz: CLI cleanup commands for stale state
- gt-rdmw: orphan-check in deacon patrol
- gt-orphans command (list orphaned molecules)


Merge: gt-rana.2

branch: polecat/nux
target: main
source_issue: gt-rana.2
rig: gastown