Witness pre-kill verification protocol

Add pre-kill verification protocol to Witness CLAUDE.md template.

## Protocol for Witness Prompting

```markdown
## Pre-Kill Verification Protocol

Before killing any worker session, verify workspace is clean.

### Verification Steps

When a worker signals done:

1. **Capture worker state**:
```bash
town capture <polecat> "git status && git stash list && bd sync --status"
```

2. **Assess the output** (use your judgment):
- Is working tree clean?
- Is stash list empty?
- Is beads synced?

3. **Decision**:
- **CLEAN**: Proceed to kill session
- **DIRTY**: Send nudge with specific issues

### Nudge Templates

**Uncommitted Changes**:
```
town inject <polecat> "WITNESS CHECK: Uncommitted changes found. Please commit or discard: <files>. Signal done when clean."
```

**Beads Not Synced**:
```
town inject <polecat> "WITNESS CHECK: Beads not synced. Run 'bd sync' then commit. Signal done when complete."
```

### Kill Sequence

Only after verification passes:
```bash
town kill <polecat>
town sleep <polecat>
```

### Escalation

If worker fails verification 3+ times:
```bash
town mail send mayor/ -s "Escalation: <polecat> stuck" -m "Cannot complete cleanup after 3 attempts. Issues: <list>."
```
```

## Implementation

Add to WITNESS_CLAUDE.md template.


Outpost error handling: Retry logic and resilience

## Overview

Error handling and retry logic for outpost operations.

## Error Types

```go
var (
    ErrOutpostUnreachable = errors.New("outpost unreachable")
    ErrWorkerSpawnFailed  = errors.New("worker spawn failed")
    ErrWorkerTimeout      = errors.New("worker timed out")
    ErrCostCapExceeded    = errors.New("cost cap exceeded")
    ErrAllOutpostsBusy    = errors.New("all outposts at capacity")
)
```

## Retry Policy

```go
type RetryPolicy struct {
    MaxAttempts     int
    InitialBackoff  time.Duration
    MaxBackoff      time.Duration
    BackoffFactor   float64
    RetryableErrors []error
}

func DefaultRetryPolicy() *RetryPolicy {
    return &RetryPolicy{
        MaxAttempts:    3,
        InitialBackoff: 1 * time.Second,
        MaxBackoff:     30 * time.Second,
        BackoffFactor:  2.0,
        RetryableErrors: []error{
            ErrOutpostUnreachable,
            ErrWorkerSpawnFailed,
        },
    }
}
```

## Retry Implementation

```go
func (m *OutpostManager) SpawnWithRetry(issue string, cfg WorkerConfig) (Worker, error) {
    var lastErr error
    backoff := m.retryPolicy.InitialBackoff

    for attempt := 0; attempt < m.retryPolicy.MaxAttempts; attempt++ {
        outpost := m.policy.SelectOutpost(issue, m.outposts)
        if outpost == nil {
            return nil, ErrAllOutpostsBusy
        }

        worker, err := outpost.Spawn(issue, cfg)
        if err == nil {
            return worker, nil
        }

        if !m.isRetryable(err) {
            return nil, err
        }

        lastErr = err
        time.Sleep(backoff)
        backoff = min(backoff * m.retryPolicy.BackoffFactor, m.retryPolicy.MaxBackoff)
    }

    return nil, fmt.Errorf("spawn failed after %d attempts: %w",
        m.retryPolicy.MaxAttempts, lastErr)
}
```

## Outpost Health Tracking

```go
type OutpostHealth struct {
    LastPing      time.Time
    LastError     error
    FailureCount  int
    CircuitBreaker bool  // If true, skip this outpost
}

func (m *OutpostManager) updateHealth(name string, err error) {
    // Track failures, open circuit breaker after N failures
    // Auto-reset after successful ping
}
```

## Config

```yaml
policy:
  retry:
    max_attempts: 3
    initial_backoff: 1s
    max_backoff: 30s

  circuit_breaker:
    failure_threshold: 5
    reset_timeout: 1m
```

## Files

- `internal/outpost/retry.go`
- `internal/outpost/health.go`

## Dependencies

Depends on: gt-9a2.3 (OutpostManager)
Can be done after basic outpost implementations work.


Work on gt-role-template: Refine witness/CLAUDE.md role t...

Work on gt-role-template: Refine witness/CLAUDE.md role template. Run 'bd show gt-role-template' to see the full issue.


mol-code-review: Self-improving code review molecule

Create a code review molecule that enables Gas Town to self-improve through automated PR review. Flywheel: review generates quality checks, discovered issues, pattern learning.


Harness Design & Documentation

The harness (Gas Town installation directory) needs design cleanup, documentation, and tooling.

## Current Problems

1. **Shared harness confusion**: ~/ai is shared by PGT and GGT with overlapping structures
   - PGT uses ~/ai/mayor/ as town-level Mayor home
   - GGT Mayor works in ~/ai/mayor/rigs/gastown/
   - ~/ai/gastown/ has both .gastown/ (PGT) and mayor/ (git clone)

2. **Beads redirect**: ~/ai/.beads/redirect → mayor/rigs/gastown/.beads
   - This is specific to GGT's decentralized structure
   - Should be documented as an example

3. **architecture.md**: Verify rig-level mayor/rig/ is shown correctly

4. **No harness creation tooling**: Users must manually set up

## Proposed Work

- Document what a harness IS (installation directory)
- Create harness creation command or template repo
- Update architecture.md if needed
- Create example harness configuration for docs
- Resolve PGT/GGT sharing issue


gt session restart/status: Complete session management

Add missing session subcommands:

- gt session restart <rig> <polecat> - Restart a session (stop + start)
- gt session status <rig> <polecat> - Show session status details

status should show:
- Running state
- Uptime
- Current activity
- Last output timestamp


gt molecule current: Show what agent should be working on

Query what an agent identity is supposed to be working on via breadcrumb trail.

## Command
```bash
gt molecule current <identity>
gt molecule current gastown/furiosa
gt molecule current deacon
```

## Logic
1. Find handoff bead for identity (pinned bead titled "<role> Handoff")
2. Parse attachment field → molecule ID
3. If no attachment → "naked" (no active molecule)
4. If attached → load molecule, find current step:
   - bd ready --parent=<mol-id> → next unblocked step
   - Or first in_progress step

## Output
```
Identity: gastown/furiosa
Handoff:  gt-8v2 (Furiosa Handoff)
Molecule: gt-mol-abc (mol-polecat-work)
Progress: 3/8 steps complete
Current:  gt-mol-abc.4 - verify-tests
```

Or if naked:
```
Identity: gastown/angharad
Handoff:  gt-9x1 (Angharad Handoff)
Molecule: (none attached)
Status:   naked - awaiting work assignment
```

## Use Cases
- Mayor checking what polecats are doing
- Witness verifying polecat progress
- Debug: "why isnt this polecat working?"
- Deacon patrol: track all agent states


Merge: gt-3x1.3

branch: polecat/Doof
target: main
source_issue: gt-3x1.3
rig: gastown


Config package: Config, State types and JSON serialization

Config and state types with JSON serialization.

## Town Config (config/town.json)

```go
type TownConfig struct {
    Type      string    `json:"type"`       // "town"
    Version   int       `json:"version"`    // schema version
    Name      string    `json:"name"`       // town identifier
    CreatedAt time.Time `json:"created_at"`
}
```

## Rigs Registry (config/rigs.json)

```go
type RigsConfig struct {
    Version int                `json:"version"`
    Rigs    map[string]RigEntry `json:"rigs"`
}

type RigEntry struct {
    GitURL   string    `json:"git_url"`
    AddedAt  time.Time `json:"added_at"`
    BeadsConfig *BeadsConfig `json:"beads,omitempty"`
}

type BeadsConfig struct {
    Repo   string `json:"repo"`   // "local" | path | git-url
    Prefix string `json:"prefix"` // issue prefix
}
```

## Agent State (*/state.json)

```go
type AgentState struct {
    Role       string    `json:"role"`       // "mayor", "witness", etc.
    LastActive time.Time `json:"last_active"`
    Session    string    `json:"session,omitempty"`
    Extra      map[string]any `json:"extra,omitempty"`
}
```

## Interface

```go
func LoadTownConfig(path string) (*TownConfig, error)
func SaveTownConfig(path string, config *TownConfig) error

func LoadRigsConfig(path string) (*RigsConfig, error)
func SaveRigsConfig(path string, config *RigsConfig) error

func LoadAgentState(path string) (*AgentState, error)
func SaveAgentState(path string, state *AgentState) error
```

## Validation

- Version compatibility checks
- Required field validation
- Path existence verification


Work on ga-p6r: Add handoff protocol to spawn priming. En...

Work on ga-p6r: Add handoff protocol to spawn priming. Ensure polecats receive handoff context when spawned. When done, submit MR (not PR) to integration branch for Refinery.


Deacon rounds molecule: the kernel execution loop

Define and implement mol-deacon-rounds - the molecule the Deacon executes each wake.

## Molecule Definition

```markdown
# mol-deacon-rounds

The Deacon kernel - executed on every wake cycle.

## Step: session-check
Check context budget. If low, cycle to fresh session.
Needs: (none - always runs first)

## Step: health-scan
Check health of all monitored agents:
- Mayor (gt-mayor session)
- Witnesses (gt-*-witness sessions)
- Refineries (gt-*-refinery sessions)
- Crew (gt-*-* sessions, lifecycle only)

Remediate unhealthy agents:
- Restart dead sessions
- Nudge stuck agents
- Escalate if remediation fails

Needs: session-check

## Step: lifecycle
Process pending lifecycle requests from mail:
- LIFECYCLE: <identity> requesting cycle
- LIFECYCLE: <identity> requesting restart
- LIFECYCLE: <identity> requesting shutdown

Needs: health-scan

## Step: plugins
Run due plugins:
1. Check scheduled plugins (cron-like)
2. Check event-triggered plugins (from mail events)
3. Check human-requested plugins (from mail)
4. Execute each, record outcomes

Needs: lifecycle

## Step: events
Process timer and event callbacks:
- TIMER: <identity> wake at <time>
- EVENT: <type> <payload>

Notify relevant agents or trigger actions.

Needs: plugins

## Step: complete
Finalize the cycle:
1. Update heartbeat.json
2. Clear/update keepalive.json
3. Log summary
4. Return to prompt (wait for next wake)

Needs: events
```

## Execution

The Deacon reads this molecule from its pinned bead and executes steps in order.
Each step:
1. Announces "Starting <step>"
2. Performs the step logic
3. Records outcome
4. Proceeds to next step

## Step Plugins

Each step can have inline plugins (additional attention):
```yaml
step: health-scan
  plugins:
    - advanced-diagnostics  # Run if basic scan finds issues
```

## Relation to bd mol

Uses the same molecule format as bd mol for polecats.
Deacon molecule is special: it's the kernel, not work.


Add crew session pattern to lifecycle handling

Update identityToSession and restartSession to handle crew patterns: gastown/max -> gt-gastown-max. Crew workers can request lifecycle but are not proactively monitored.


gt swarm start: Does not spawn polecat sessions

gt swarm start marks swarm as 'active' but doesn't start any polecat sessions.

Repro:
1. gt swarm create gastown --epic gt-hw6 --worker Toast --worker Nux
2. gt swarm start gt-hw6
3. gt session list - shows no new sessions

Expected: Polecat sessions should start for each worker.
Actual: No sessions started, workers sit idle.


Deacon: Hierarchical health-check orchestrator

Replace daemon heartbeats with Deacon - an AI agent that keeps Gas Town running.

## Core Concept

The Deacon is a **Claude agent** (not just a Go process) that:
- Lives at town root in gt-deacon session
- Has its own mailbox (deacon/ identity in town beads)
- Is poked by a minimal Go daemon every ~60s (if idle)
- Monitors Mayor and Witnesses proactively
- Handles lifecycle requests (restart/cycle) from Mayor, Witnesses, AND Crew

## Architecture

```
Minimal Go Daemon (just watches Deacon)
         |
         v
     Deacon (Claude agent)
         |
    +----+----+
    v         v
  Mayor    Witnesses --> Polecats (Witness-managed)
    |         |
    +----+----+
         |
      Crew (lifecycle only, not monitored)
```

## Deacon Responsibilities

**Proactive monitoring:**
- Mayor health (tmux session, keepalive freshness)
- Witness health (tmux sessions, keepalive freshness)

**Reactive lifecycle:**
- Process restart/cycle requests from Mayor, Witnesses, Crew
- Kill session, create new, prime, verify startup

**Escalation:**
- Mail human (configurable) if issues can't be resolved

## Key Files

- ~/gt/DEACON.md - Role context
- ~/gt/deacon/ - State directory
  - heartbeat.json - Written each wake cycle (daemon checks this)
  - state.json - Health tracking, last scan results
- ~/gt/.beads/ - Town beads with deacon/ mail identity

## Wake Cycle

1. Write heartbeat (prevents daemon from poking)
2. Check mail (lifecycle requests)
3. Quick health scan (Mayor, Witnesses)
4. Process lifecycle requests
5. Remediate unhealthy agents
6. Update state

## Session Patterns

- Deacon: gt-deacon
- Mayor: gt-mayor
- Witness: gt-<rig>-witness
- Crew: gt-<rig>-<name> (e.g., gt-gastown-max)

## Relation to Policy Beads

Future: Deacon behavior configurable via policy beads (gt-3zw).
Initial implementation uses sensible defaults.


gt mq submit: creates task type instead of merge-request type

## Problem

`gt mq submit` creates an issue with `type: task` but should be `type: merge-request`.

## Evidence

```
$ bd show gt-n508
gt-n508: Merge: gt-70b3
Status: open
Priority: P1
Type: task      <-- WRONG, should be merge-request
...
Description:
type: merge-request   <-- Correct type is in description, not in actual type field
```

## Impact

`gt mq list` shows empty queue because it queries for `type: merge-request`

## Fix

`gt mq submit` should set `--type merge-request` when creating the bead.


gt handoff: Deadlock in waitForRetirement


Split PGT/GGT harness or migrate to GGT-only

Current ~/ai harness is shared by PGT and GGT with confusing overlap. Options:
1. Keep separate (document the coexistence)
2. Migrate fully to GGT structure
3. Create separate harnesses

This affects the beads redirect, Mayor home location, and rig structure.


Work on ga-y6b: Implement Refinery as Claude agent. Conve...

Work on ga-y6b: Implement Refinery as Claude agent. Convert from shell to Claude agent that processes MRs in merge queue, runs tests, merges to integration branch. When done, submit MR (not PR) to integration branch for Refinery.


Session pre-shutdown checks

Session stop should verify clean state before killing, like PGT.

## Pre-Shutdown Checks

### 1. Git Working Tree Clean
```go
func checkGitClean(clonePath string) error {
    // git status --porcelain
    // Fail if any output
}
```

### 2. All Commits Pushed
```go
func checkCommitsPushed(clonePath string) error {
    // git log origin/HEAD..HEAD
    // Fail if any unpushed commits
}
```

### 3. Assigned Issues Handled
```go
func checkIssuesHandled(polecat *Polecat) error {
    // If polecat.Issue != "", check if closed or reassigned
}
```

### 4. Beads Synced
```go
func checkBeadsSynced(clonePath string) error {
    // bd sync --status in clone directory
}
```

## Behavior on Failure
1. First attempt: Nudge worker to fix
2. Retry up to 3 times with delay
3. After retries: Escalate to Witness/Mayor

## Integration
Modify internal/session/manager.go Stop():
```go
func (m *Manager) Stop(polecat string, force bool) error {
    if !force {
        if err := m.runPreShutdownChecks(polecat); err != nil {
            return fmt.Errorf("pre-shutdown checks failed: %w", err)
        }
    }
    // existing stop logic
}
```

## Flags
- --force: Skip checks
- --grace-period N: Time to wait for fixes

## Dependencies
- Ties into gt-69l (hook system) - can be hook-based
- Ties into gt-f8v (Witness pre-kill verification)

## Acceptance Criteria
- [ ] Stop fails if uncommitted changes (without --force)
- [ ] Stop fails if unpushed commits
- [ ] Clear error messages with fix instructions
- [ ] --force bypasses all checks


Document harness concept in docs/harness.md

Create comprehensive harness documentation:
- What is a harness (installation directory)
- Recommended structure and naming
- .beads/redirect for default project
- config/ contents (rigs.json, town.json)
- Mayor home vs rig-level mayor/
- Example configurations
- Relationship to rigs


Merge: gt-rana.1

branch: polecat/rictus
target: main
source_issue: gt-rana.1
rig: gastown


Work on gt-ogr: Fix rig count in tmux status bar. The cou...

Work on gt-ogr: Fix rig count in tmux status bar. The count is showing wrong. Run 'bd show gt-ogr' for details.


Phase 1.3: gt doctor checks for ephemeral health

Add doctor checks for ephemeral beads repo.

## Checks

1. **ephemeral-exists**: .beads-ephemeral/ directory exists for each rig
2. **ephemeral-git**: It's a valid git repo
3. **ephemeral-orphans**: Molecules started but never squashed (>24h old)
4. **ephemeral-size**: Warn if ephemeral repo is >100MB (should be cleaned)
5. **ephemeral-stale**: Molecules with no activity in last hour

## Auto-fix

--fix can:
- Create missing ephemeral repo
- Clean up old completed molecules (already squashed)
- NOT auto-squash incomplete molecules (needs AI summary)


Work request: gt-976 crew lifecycle support

Hey Max, filed gt-976 for you - adding crew lifecycle support to Deacon.

Currently crew is 'human-managed' and can't request automated refresh. Would be useful for molecules that need fresh sessions mid-workflow.

Key changes:
- getManager(RoleCrew) → return deacon/ instead of human
- Teach Deacon crew session patterns
- Test with gt nudge

Priority 2, no rush but would unblock molecule automation for crew.

- Dave (beads/crew/dave)


Merge: gt-rana.3

branch: polecat/dementus
target: main
source_issue: gt-rana.3
rig: gastown


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue (gt-test123) and understand the requirements.
Identify any blockers or missing information.


Phase 3.2: mol-polecat-work squash step

Add summary+squash as final steps in mol-polecat-work.

## Current Steps

1. read-assignment
2. understand-task
3. implement-solution
4. verify-tests
5. commit-work
6. signal-done

## Updated Steps

1. read-assignment
2. understand-task
3. implement-solution
4. verify-tests
5. commit-work
6. **generate-summary** ← NEW
7. **squash-molecule** ← NEW
8. signal-done

## Step Definitions

### generate-summary
Agent writes a concise summary following the template.
Save to a local variable or temp file.

### squash-molecule
Run: bd squash $MOLECULE_ROOT --summary "$SUMMARY"
This creates digest in main beads, cleans ephemeral.

## Update Location

This requires updating the mol-polecat-work definition in beads molecule catalog.


Design GGT prompt architecture

Audit PGT prompts and design canonical prompt system for GGT. Create docs/prompts.md with inventory, gap analysis, and Witness prompt design.


Polecats must not create GitHub PRs

Polecats should never use 'gh pr create' or create GitHub pull requests.

## Correct Workflow
1. Polecat works on polecat/<name> branch
2. Commits and pushes to origin
3. Creates beads MR issue (type: merge-request)
4. Refinery processes the MR and merges to main

## Wrong Workflow
- Using gh pr create
- Creating GitHub pull requests directly

## Why
- Refinery is our merge queue processor
- GitHub PRs bypass our workflow
- Beads MRs are the coordination mechanism


Tmux wrapper: session operations

Wrapper for tmux session operations via subprocess.

## Interface

```go
type Tmux struct{}

func NewTmux() *Tmux

// Session lifecycle
func (t *Tmux) NewSession(name, workDir string) error
func (t *Tmux) KillSession(name string) error
func (t *Tmux) HasSession(name string) (bool, error)
func (t *Tmux) ListSessions() ([]string, error)

// Session interaction
func (t *Tmux) SendKeys(session, keys string) error
func (t *Tmux) CapturePane(session string, lines int) (string, error)
func (t *Tmux) AttachSession(session string) error

// Window operations (if needed)
func (t *Tmux) SelectWindow(session string, index int) error
```

## Session Naming

Convention: `gt-<rig>-<polecat>` (e.g., `gt-wyvern-Toast`)

## Implementation

- Shell out to tmux binary
- CapturePane uses `tmux capture-pane -p -t <session> -S -<lines>`
- SendKeys uses `tmux send-keys -t <session> '<keys>' Enter`

## Error Handling

- "no server running": tmux not started (not an error for HasSession)
- "session not found": session doesn't exist
- Wrap all tmux errors with context

## Environment

Requires TMUX_TMPDIR or uses default socket. Don't assume tmux is running.


Update documentation for new config architecture

Update docs to reflect new structure:
- docs/architecture.md: Directory structure section
- CLAUDE.md files: Config references
- Add docs/configuration.md with full reference


gt spawn: Enter key needs debounce delay after paste

## Problem

When spawning polecats via `gt spawn`, instructions are pasted into tmux but workers often sit idle at prompt because the Enter key arrives before the paste is fully processed.

## Observed Behavior

- Instructions pasted via tmux send-keys
- Enter key sent immediately after
- Worker session shows prompt with no input (paste not submitted)
- Requires manual intervention to nudge workers

## Expected Behavior

- Paste completes fully
- Enter key submits the pasted instructions
- Worker begins executing immediately

## Root Cause

Likely a race condition between paste buffer processing and keypress handling. Need either:
1. Debounce delay before sending Enter
2. Longer delay (Tmax) to ensure paste completes
3. Alternative submission mechanism

## Impact

- Swarm of 10 workers had multiple stalls at startup
- Required manual tmux send-keys to unstick them
- Defeats purpose of automated spawning

## References

- Observed during Mad Max swarm (Dec 18, 2025)
- Affects gt spawn command in internal/cmd/spawn.go


gt doctor: Detect and clean up orphaned sessions/processes

## Problem
Orphaned tmux sessions and Claude processes accumulate over time, consuming memory.

## Discovered Orphans
- gt-deacon: Idle Claude session, not part of any rig

## Proposed Solution

### gt doctor --check (default)
Detect issues without fixing:
- Orphan sessions (not matching rig/polecat/crew/witness/refinery/mayor pattern)
- Claude processes without parent tmux session
- Tmux sessions without Claude (stuck at bash prompt)
- Polecats marked 'working' but session idle

### gt doctor --fix
Clean up detected issues:
- Kill orphan sessions
- Kill orphan Claude processes
- Optionally reset stuck polecat state

### gt gc (alternative name)
Short alias for cleanup operations.

## Acceptance Criteria
- [ ] Detects orphan sessions
- [ ] Detects orphan processes
- [ ] Safe cleanup (doesn't kill active work)
- [ ] Reports what was cleaned


Architecture: Decentralized rig structure with per-rig agents

## Decision

Adopt decentralized architecture where each rig contains all its agents (mayor/, witness/, refinery/, polecats/) rather than centralizing mayor clones at town level.

## Town Level Structure

```
~/ai/                              # Town root
├── config/                        # Town config (VISIBLE, not hidden)
│   ├── town.json                  # {"type": "town"}
│   ├── rigs.json                  # Registry of managed rigs
│   └── federation.json            # Wasteland config (future)
│
├── mayor/                         # Mayor's HOME at town level
│   ├── CLAUDE.md
│   ├── mail/inbox.jsonl
│   └── state.json
│
└── <rigs>/                        # Managed projects
```

## Rig Level Structure (e.g., wyvern)

```
wyvern/                            # Rig = clone of project repo
├── .git/info/exclude              # Gas Town adds: polecats/ refinery/ witness/ mayor/
├── .beads/                        # Beads (if project uses it)
├── [project files]                # Clean project code on main
│
├── polecats/                      # Worker clones
│   └── <name>/                    # Each is a git clone
│
├── refinery/
│   ├── rig/                       # Refinery's clone
│   ├── state.json
│   └── mail/inbox.jsonl
│
├── witness/                       # NEW: Per-rig pit boss
│   ├── rig/                       # Witness's clone
│   ├── state.json
│   └── mail/inbox.jsonl
│
└── mayor/
    ├── rig/                       # Mayor's clone for this rig
    └── state.json
```

## Key Decisions

1. **Visible config dir**: `config/` not `.gastown/` (models don't find hidden dirs)
2. **Witness per-rig**: Each rig has its own Witness (pit boss) with its own clone
3. **Mayor decentralized**: Mayor's clones live IN each rig at `<rig>/mayor/rig/`
4. **Minimal invasiveness**: Only `.git/info/exclude` modified, no commits to project
5. **Clone subdir name**: Keep `rig/` for consistency (refinery/rig/, witness/rig/, mayor/rig/)

## Role Detection

- Town root or mayor/ → Mayor (town level)
- Rig root → Mayor (canonical main)
- <rig>/mayor/rig/ → Mayor (rig-specific)
- <rig>/refinery/rig/ → Refinery
- <rig>/witness/rig/ → Witness
- <rig>/polecats/<name>/ → Polecat

## Migration from PGT

- `mayor/rigs/<rig>/` → `<rig>/mayor/rig/`
- `<rig>/town/` → eliminated (rig root IS the clone)
- Add `witness/` to each rig


Merge: gt-5af.5

branch: polecat/Scabrous
target: main
source_issue: gt-5af.5
rig: gastown


gt mq list: doesn't show submitted MRs

After submitting MRs with gt mq submit, gt mq list gastown shows empty queue.

## Reproduction
1. gt mq submit --issue gt-h5n.5 --branch polecat/Scabrous
2. gt mq list gastown → (empty)
3. bd list --type=merge-request → shows the MR

## Expected
gt mq list should show submitted MRs

## MR example
gt-ts4u has rig: gastown in description, type=merge-request, status=open


CLI: workspace commands (init, add, list)

GGT needs workspace management commands beyond install.

## Commands (beyond gt-f9x.3 install)

### gt workspace list
List all rigs in current workspace.
```
gt workspace list [--json]
```
Essentially `gt rig list` but framed as workspace view.

### gt workspace add
Add existing rig to workspace (alternative to gt rig add).
```
gt workspace add <git-url> [--name NAME]
```

### gt onboard
Interactive first-time setup wizard.
```
gt onboard
```
- Prompts for workspace location
- Creates structure via gt install
- Offers to add first rig

## Note
May be redundant with gt-f9x.3 (install) and gt-u1j.16 (rig commands).
Consider if this is needed or should be closed as covered by those.

## PGT Reference
gastown-py/src/gastown/cli/workspace_cmd.py


Merge: gt-3x0z.2

branch: polecat/nux
target: main
source_issue: gt-3x0z.2
rig: gastown


Merge: gt-3x0z.3

branch: polecat/rictus
target: main
source_issue: gt-3x0z.3
rig: gastown


detectSender() doesn't recognize crew workers

## Problem

detectSender() in internal/cmd/mail.go only checks for /polecats/ directories. Crew workers in /crew/<name>/ fall through to the default 'mayor/', so:
- gt mail inbox shows mayor's inbox instead of the crew worker's
- gt mail send sets the wrong From address

## Fix

Add crew worker detection before the /polecats/ check:

if strings.Contains(cwd, "/crew/") {
    parts := strings.Split(cwd, "/crew/")
    ...
    return fmt.Sprintf("%s/crew/%s", rigName, crewMember)
}

## Affected
- Any crew worker running gt mail inbox without explicit address
- Crew worker handoffs (wrong sender)


Test MR

test


gt spawn should use bd mol run for molecule attachment

Simplify Gas Town to use bd mol run for work tracking.

## Key Insight
Two distinct mechanisms, not duplicative:

| Mechanism | Purpose | Query |
|-----------|---------|-------|
| **Pinned molecule** (bd mol run) | What am I working on? | `bd list --pinned --assignee=me` |
| **Handoff mail** | Context notes for restart | `gt mail read` (self-addressed) |

The handoff is just **mail to yourself** - optional context notes.
The molecule is **the actual work** - required state.

## Current State (Overengineered)
Gas Town has custom attachment system:
- Permanent "Foo Handoff" pinned beads per identity
- AttachMolecule(pinnedBeadID, moleculeID)
- Attachment fields parsed from description
- Separate from beads pinning

## New Model (Simplified)
Use bd mol run directly:

```bash
# Spawn polecat with molecule
bd mol run mol-polecat-work --var issue=gt-xyz
# This: spawns, assigns to caller, pins root, sets in_progress
```

Query current work:
```bash
bd list --pinned --assignee=gastown/furiosa --status=in_progress
```

Handoff context (when needed):
```bash
gt mail send gastown/furiosa -s "Context notes" -m "Was on step 4..."
```

## Changes Required

### Remove from Gas Town
- AttachMolecule() / DetachMolecule()
- AttachmentFields struct and parsing
- GetAttachment() / SetAttachmentFields()
- Permanent pinned handoff beads per identity
- Daemon attachment detection (checkDeaconAttachment)

### Update gt spawn
```go
// Old: custom molecule instantiation + attachment
// New: just call bd mol run
cmd := exec.Command("bd", "mol", "run", protoID, "--var", "issue="+issueID)
```

### Update gt prime / agent context
```go
// Old: find handoff bead, parse attachment
// New: query for pinned molecule
cmd := exec.Command("bd", "list", "--pinned", "--assignee="+identity, "--status=in_progress", "--json")
```

### Update documentation
- Remove handoff bead attachment docs
- Clarify: handoff = mail, molecule = work
- Update CLAUDE.md templates

## Benefits
1. One system for work tracking (beads)
2. Simpler Gas Town code
3. bd mol squash works naturally
4. Handoff is just mail (already works)

## Related
- gt-3x0z: Wisp Molecule Integration
- gt-rana: Patrol System
- gt-lek6: gt rig reset --stale
- gt-ay1r: gt molecule current


Verify architecture.md shows correct harness and rig structure

Review architecture.md diagrams:
- Verify town-level structure shows harness correctly
- Confirm rig-level mayor/rig/ is shown (it appears to be there at line 197)
- Check mermaid diagrams match ASCII diagrams
- Update if any inconsistencies found
- Cross-reference with new harness.md docs


gt spawn should auto-start refinery/witness if not running

When spawning a polecat, the infrastructure (refinery, witness) should already be running.

## Current Behavior
spawn.go only:1. Assigns issue to polecat2. Sends work mail3. Starts polecat session

The refinery and witness must be started separately.

## Expected Behavior (per user feedback)
When spawning a polecat, if the rig's refinery or witness is not running, auto-start them.

## Options

### Option A: spawn auto-starts infrastructure
Check if refinery/witness running before spawn, start if not.

### Option B: gt swarm start <rig> command
Explicit command that:
1. Starts refinery
2. Starts witness
3. Optionally spawns polecats on bd ready issues

### Option C: gt rig start <rig>
Similar to Option B but as rig lifecycle command.

## Related
- gt-n7z7: refinery --foreground race condition bug
- gt-u1j.18: witness CLI commands


BUG: gt done doesn't push branch to origin - work lost when worktree deleted

## Problem

`gt done` creates a merge-request record in beads but **never pushes the branch to origin**.

When polecats are cleaned up (worktrees deleted), the branch is lost forever. The MR record exists but there's no actual branch to merge.

## Evidence

12 MQ items had `ready` status but no corresponding branches on origin. All polecat worktrees were deleted, losing all work.

## Impact

**CRITICAL**: All polecat work is silently lost unless polecats manually push (which they don't know to do).

## Fix

In `done.go`, before creating the MR:
1. `git push origin <branch>` to push the branch to remote
2. Only create MR record if push succeeds

## Location
`mayor/rig/internal/cmd/done.go:124-135`


gt mail send: --priority flag should work like bd mail send

UX inconsistency: gt mail send passes flags that bd mail send doesn't support.

## Root Cause

router.go line 42 passes `--priority` to bd:
```go
args = append(args, "--priority", fmt.Sprintf("%d", beadsPriority))
```

But `bd mail send` only has `--urgent` (boolean), not `--priority`.

## Fix Options

1. Add `--priority` flag to `bd mail send` (preferred - more expressive)
2. Change router to only use `--urgent` when priority=0

## Also Affected

- `--type` flag (line 46) - bd mail send doesn't have this
- `--thread-id` flag (line 51) - bd mail send doesn't have this
- `--reply-to` flag (line 56) - bd mail send doesn't have this

The router assumes bd mail send has features it doesn't have.


session-gc

Clean dead sessions. Run gt gc --sessions.


tmux notifications: display-message too subtle, use send-keys instead

## Problem

`tmux display-message` notifications are not visible enough - they appear briefly in the status bar and are easy to miss.

## Current Behavior

router.go uses:
```go
r.tmux.DisplayMessageDefault(sessionID, notification)
```

## What Works

Sending echo commands directly to the terminal:
```bash
tmux send-keys -t <session> "echo '📬 NEW MAIL from mayor'" Enter
```

## Proposed Fix

Change notification method to send visible output to the terminal, perhaps with a box/banner:
```
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📬 NEW MAIL from mayor
Subject: <subject>
Run: bd mail inbox
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
```

## Considerations

- This interrupts the terminal output (acceptable for important mail)
- Could check if Claude is mid-response and queue notification
- Or use tmux popup if available

Additional issues:
1. Enter key not sent properly when chained with send-keys
2. Need to debounce and send Enter separately
3. Correct pattern: send text, sleep briefly, then send Enter


🤝 HANDOFF: Investigate beads-sync divergence (221 files)

## Context

gt doctor now detects orphaned code on beads-sync branch. Running it shows:

  beads-sync-orphans: 221 file(s) on beads-sync not in main

This is in the gastown repo (checking from crew/max).

## Background

- Earlier today we recovered orphaned mail migration code lost in merge 96c773f
- Recently simplified architecture: all workers use mayor/rig/.beads (redirects)
- This simplification may have caused beads-sync branch to diverge unexpectedly

## Investigation Steps

1. From crew/max run: git diff main..beads-sync --stat
2. Check if beads-sync should even exist anymore (was for multi-clone sync)
3. If obsolete with redirect architecture, consider deleting it
4. If it has legitimate changes, cherry-pick or merge to main

## Key Question

With all workers using mayor/rig/.beads via redirects, is beads-sync still needed?

## Commands

git log main..beads-sync --oneline | head -20
git diff main..beads-sync -- *.go | head -100


Immediate daemon notification on lifecycle request

When gt handoff sends a lifecycle request to the daemon (via bd mail send deacon/), the daemon only discovers it on its next heartbeat poll (every 5 min). Workers wait unnecessarily for retirement.

## Current Behavior
1. Worker runs gt handoff
2. Lifecycle mail sent to deacon/ via beads
3. Worker blocks waiting for retirement
4. Daemon heartbeat runs (up to 5 min later)
5. Daemon processes lifecycle request and kills session

## Expected Behavior
Lifecycle requests should be processed immediately, not on poll interval.

## Proposed Solutions

### Option A: SIGUSR1 Signal (simplest)
1. Add SIGUSR1 handler in daemon that calls ProcessLifecycleRequests()
2. gt handoff reads daemon.pid and sends SIGUSR1 after mail send

### Option B: Unix Socket
1. Daemon listens on ~/gt/daemon/lifecycle.sock
2. gt handoff connects and sends 'process' message

### Option C: Watchfile + fsnotify
1. gt handoff touches ~/gt/daemon/lifecycle.trigger
2. Daemon uses fsnotify to detect and process

Recommend Option A for simplicity.

## Affected Files
- internal/daemon/daemon.go - add signal handler
- internal/cmd/handoff.go - send signal after mail


Worker cleanup: Beads sync on shutdown

Add beads sync verification to worker cleanup checklist and Witness verification.

## Update to Decommission Checklist (gt-sd6)

Add to pre-done verification:
- bd sync --status must show 'Up to date'
- git status .beads/ must show no changes

## Beads Edge Cases

Uncommitted beads changes:
  bd sync
  git add .beads/
  git commit -m 'beads: final sync'

Beads sync conflict (rare):
  git fetch origin main
  git checkout main -- .beads/
  bd sync --force
  git add .beads/
  git commit -m 'beads: resolve sync conflict'

## Update to Witness Verification (gt-f8v)

When capturing worker state:
  town capture <polecat> "bd sync --status && git status .beads/"

Check for:
- bd sync --status shows 'Up to date'
- git status .beads/ shows no changes

If beads not synced, nudge:
  WITNESS CHECK: Beads not synced. Run 'bd sync' then commit .beads/. Signal done when complete.


Test Epic: GGT MVP Validation


CLI: rig commands (add, list, show, remove)

GGT needs rig management commands.

Missing Commands:
- gt rig add <git-url> [--name NAME] - Add rig to workspace
- gt rig list - List all rigs with status
- gt rig show <rig> - Show detailed rig info
- gt rig remove <rig> - Remove a rig

PGT Reference: gastown-py/src/gastown/cli/rig_cmd.py

Current State:
- gt init creates rig structure but no ongoing management
- Rig discovery in internal/rig/manager.go but not exposed via CLI


Town-level beads: Real DB for coordination mail

Implement Option A from mail redesign: Town gets real beads DB for coordination.

## Background

Mail is now Beads. But currently:
- Town .beads/redirect points to rig beads
- mayor/mail/ has legacy JSONL files
- Cross-rig coordination has no clear home

## Design

Town beads = coordination, cross-rig mail, mayor inbox, handoffs
Rig beads = project issues, work items

Matches HOP hierarchy: platform > project > worker

## Structure

~/gt/
  .beads/           # REAL beads DB (prefix: gm-)
  mayor/
    town.json
    state.json      # NO mail/ directory
  gastown/
    .beads/         # Rig beads (prefix: ga-)

## Tasks

1. Delete ~/gt/.beads/redirect
2. Run bd init --prefix gm at ~/gt/ (town beads)
3. Delete ~/gt/mayor/mail/ directory
4. Update gt mail to use beads not JSONL
5. Add mail fields (thread_id, reply_to, msg_type)
6. Update gt prime for two-tier model
7. Update docs/architecture.md

## Addressing

- mayor/ -> town beads
- rig/agent -> rig beads
- Cross-rig -> town beads


Update gt doctor to check new config locations

Doctor should validate new structure:
- Check mayor/config.json exists and is valid
- Check settings/ exists for each rig
- Warn if old .gastown/ files still exist
- Offer --fix to migrate old locations to new


Mayor handoff mail template

Add MAYOR_HANDOFF mail template to templates.py.

## Template Function

def mayor_handoff(
    active_swarms: List[SwarmStatus],
    rig_status: Dict[str, RigStatus],
    pending_escalations: List[Escalation],
    in_flight_decisions: List[Decision],
    recent_actions: List[str],
    delegated_work: List[DelegatedItem],
    user_requests: List[str],
    next_steps: List[str],
    warnings: Optional[str] = None,
    session_duration: Optional[str] = None,
) -> Message:
    metadata = {
        'template': 'MAYOR_HANDOFF',
        'timestamp': datetime.utcnow().isoformat(),
        'session_duration': session_duration,
        'active_swarm_count': len(active_swarms),
        'pending_escalation_count': len(pending_escalations),
    }
    # ... format sections ...
    return Message.create(
        sender='mayor/',
        recipient='mayor/',
        subject='Session Handoff',
        body=body,
        priority='high',
    )

## Metadata Fields

- template: MAYOR_HANDOFF
- timestamp: ISO format
- session_duration: Human readable
- active_swarm_count: Number of active swarms
- pending_escalation_count: Number of escalations

## Mail Priority

Use priority='high' to ensure handoff is seen on startup.


Witness updates: Remove issue filing proxy

Update Witness prompting to remove issue filing proxy, since polecats now have direct beads access.

## Remove from Witness Prompting

The following is NO LONGER Witness responsibility:
- Processing polecat 'file issue' mail requests
- Creating issues on behalf of polecats
- Forwarding issue creation requests

## Add: Legacy Request Handling

If Witness receives an old-style 'please file issue' request:

1. Respond with update:
   town inject <polecat> "UPDATE: You have direct beads access now. Use bd create to file issues yourself."

2. Do not file the issue - let the polecat learn the new workflow.

## Keep in Witness Prompting

- Monitoring polecat progress
- Nudge protocol
- Pre-kill verification
- Session lifecycle management


gt session capture: Support positional line count argument

Make 'gt session capture gastown/Toast 50' work.

Currently requires: gt session capture gastown/Toast -n 50
Should also accept: gt session capture gastown/Toast 50

Agent UX principle: commands should work the way agents guess they work.


Add molecule to update local go binary on push to main

When pushing to main branch, automatically rebuild and install the gt binary on the local machine so changes are immediately available.


Update templates for Propulsion Principle

Overhaul agent prompts to embody the Universal Gas Town Propulsion Principle:

> If you find something on your hook, YOU RUN IT.

Templates to update:
- [ ] deacon.md.tmpl - Check hook first, no decision logic
- [ ] polecat.md.tmpl - Propulsion startup, follow molecule
- [ ] witness.md.tmpl - Sling wisps when spawning agents
- [ ] refinery.md.tmpl - Accept slung epics

Key changes:
1. Remove 'should I run this?' decision points
2. Add 'check your hook' as step 1 of startup
3. Make molecule-following the default mode
4. Simplify - agents don't think, they execute


TODO: Detect cycles in molecule dependency graph

molecule.go:302 has a TODO to detect cycles in the dependency graph. Currently, cyclical dependencies could cause issues.


Merge: gt-unrd

branch: polecat/Ace
target: main
source_issue: gt-unrd
rig: gastown


Bug: parseLifecycleRequest always matches 'cycle' due to LIFECYCLE prefix

In lifecycle.go, parseLifecycleRequest checks strings.Contains(title, "cycle") first, but the prefix "LIFECYCLE:" contains the word "cycle". This means ALL lifecycle messages match the cycle action, making restart and shutdown unreachable. Fix: check for restart/shutdown before cycle, or use word boundaries.


Test infrastructure: fixtures, mocks, integration tests

Test infrastructure for Gas Town.

## Test Categories

### Unit Tests
- Config parsing
- Mail operations
- Merge queue operations
- Template rendering

### Integration Tests
- Git operations (uses real git in temp dirs)
- Full workflows (spawn → work → merge)
- CLI command tests

## Fixtures

```go
package testutil

// Creates temp town with minimal structure
func NewTestTown(t *testing.T) *TestTown

// Creates temp rig with git repo
func NewTestRig(t *testing.T, town *TestTown, name string) *TestRig

// Creates test polecat
func NewTestPolecat(t *testing.T, rig *TestRig, name string) *TestPolecat
```

## Mocks

```go
// Mock tmux for session tests (avoid actual tmux)
type MockTmux struct {
    Sessions map[string][]string  // captured send-keys
}

func (m *MockTmux) NewSession(name, dir string) error
func (m *MockTmux) SendKeys(session, keys string) error
func (m *MockTmux) CapturePane(session string, lines int) (string, error)
```

## Test Helpers

```go
// Run test in temp directory
func InTempDir(t *testing.T, fn func(dir string))

// Initialize git repo for testing
func InitGitRepo(t *testing.T, dir string)

// Assert file exists with content
func AssertFileContains(t *testing.T, path, substr string)

// Assert JSON file has field
func AssertJSONField(t *testing.T, path, field string, expected any)
```

## CI Integration

- go test ./... runs all tests
- Integration tests skip with -short flag
- Coverage report generation

## Test Data

Embedded test fixtures:
```go
//go:embed testdata/*
var testdataFS embed.FS
```


Add deacon/ mail identity support

Ensure deacon/ works as a mail identity in town-level beads. Test with bd mail send deacon/ and bd mail inbox --identity deacon/.


Molecule format bridge: convert embedded markdown to child issues

## Problem

Two molecule formats exist:
1. **Old (gastown builtin)**: Steps embedded as markdown in Description field, parsed by ParseMoleculeSteps()
2. **New (bd mol)**: Steps as child issues in proper beads DAG

The daemon's InstantiateMolecule() uses the old format. bd mol spawn uses the new format.

## Options

### Option A: Require child issues (new format)
- Update daemon to use bd mol spawn instead of InstantiateMolecule
- Deprecate embedded markdown format
- Pro: One format, simpler
- Con: Breaking change for existing molecules

### Option B: Build a bridge
- In InstantiateMolecule, detect format:
  - If Description has ## Step: markers → parse to child issues
  - If issue has children with template label → use directly
- Convert old format to new format on instantiation
- Pro: Backward compatible
- Con: More complexity

## Recommendation

Option B - build the bridge. On instantiation, convert markdown steps to child issues. This unifies execution while preserving authoring flexibility.


Track operational stats as entity/audit beads

Witness and refinery track operational stats in JSON files:
- total_merged, today_merged, total_failed (refinery)
- total_checks, total_nudges, total_escalations (witness)

For HOP entity CV tracking, these could become:
- type=audit beads (daily roll-ups of operational metrics)
- Entity chain entries showing validator activity

This provides observability and contributes to entity reputation tracking (e.g., refinery X has merged 500 PRs with 2% failure rate).

Not critical for launch but aligns with HOP Platform of Platforms vision.


Go scaffolding: cmd/gt, go.mod, Cobra setup

Set up Go project structure with CLI framework.

**Stack:**
- Cobra for command/flag handling
- Lipgloss for styled terminal output

**Deliverables:**
- cmd/gt/main.go with Cobra root command
- Basic subcommands: version, help
- Lipgloss styles for status output (success, warning, error)
- go.mod with dependencies


Spawn --molecule integration

Implement gt spawn --molecule flag for molecule-based polecat workflows.

Usage: gt spawn --issue gt-xyz --molecule mol-gastown-polecat

Behavior:
1. Validate molecule exists and is well-formed
2. Create molecule instance (child beads) under the issue
3. Find first ready step(s) in the instance
4. Spawn polecat with first ready step as initial work

Implementation:
1. Add --molecule flag to spawn command
2. Call molecule.Instantiate()
3. Query ready steps from instance
4. Pass first ready step to polecat context

Files: internal/cmd/spawn.go

Acceptance:
- --molecule flag works
- Creates proper molecule instance
- Polecat starts on first ready step
- End-to-end test with actual polecat


bd mail send: pinned column missing from schema

gt mail send fails with: sqlite3: SQL logic error: table issues has no column named pinned

Likely a schema migration issue - bd schema has 'pinned' field but SQLite table doesn't.

## Reproduction
gt mail send gastown/Immortan -s 'test' -m 'test'

## Error
table issues has no column named pinned

## Fix
Either:
1. Add migration to add pinned column
2. Remove pinned from insert if not present
3. Regenerate DB from JSONL


mol-polecat-work

Full polecat lifecycle from assignment to decommission.

This proto enables nondeterministic idempotence for polecat work.
A polecat that crashes after any step can restart, read its molecule state,
and continue from the last completed step. No work is lost.

Variables:
- gt-test - The source issue ID being worked on


gt mail read: Support numeric indices for message ID

Allow 'gt mail read 1' to read the first message in inbox.

Current behavior requires full message ID like 'msg-abc123'.
Should support:
- Numeric index: 'gt mail read 1' reads first/newest message
- Partial ID match: 'gt mail read abc' matches 'msg-abc123'

This is a UX improvement - agents frequently type 'gt mail read 1'.


Fix blocking bugs (gt-dsfi, gt-n7z7, gm-c6b)

Fix bugs blocking Witness functionality:

1. gt-dsfi: handoff deadlock
   - Polecats hang when trying to exit
   - Blocks shutdown request handler

2. gt-n7z7: refinery foreground race condition
   - Sometimes detects parent as already running
   - Blocks reliable Refinery startup

3. gm-c6b: mail coordination
   - Cross-rig mail should use town-level database
   - Affects Witness <-> Mayor communication

These should be fixed early as they'll block integration testing.

Fixed gt-dsfi and gt-n7z7. Issue gm-c6b not found in database.


Ephemeral polecats: spawn fresh, delete on completion

## Design Decision

Switch from pooled/idle polecats to ephemeral model:
- Spawn creates fresh worktree from main
- Polecat requests shutdown when done (bottom-up)
- Witness verifies handoff, kills session, deletes worktree
- No 'idle' state - polecats exist only while working

## Rationale

1. **Git worktrees are fast** - pooling optimization is obsolete
2. **Pooling creates maintenance burden:**
   - Git stashes accumulate
   - Untracked artifacts pile up
   - Branches drift from main
   - Beads DB gets stale
3. **PGT sync problems** came from persistent branches
4. **Support infrastructure exists** - Witness, Refinery, Mayor handle continuity
5. **Simpler mental model** - polecat exists = work in progress

## Lifecycle

```
Spawn:
  gt spawn --issue <id>
  → Creates fresh worktree: git worktree add polecats/<name> -b polecat/<name>
  → Initializes beads in worktree
  → Starts session, assigns work

Working:
  Polecat does task
  → Pushes to polecat/<name> branch
  → Submits to merge queue when ready

Completion (POLECAT-INITIATED):
  Polecat runs: gt handoff
  → Verifies git state clean
  → Sends mail to Witness: "Ready for shutdown"
  → Marks itself done, waits for termination

Cleanup (WITNESS-OWNED):
  Witness receives shutdown request
  → Verifies PR merged or in queue
  → Verifies no uncommitted changes
  → Kills session: gt session stop <rig>/<polecat>
  → Deletes worktree: git worktree remove polecats/<name>
  → Deletes branch: git branch -d polecat/<name>
  → Optionally: Notifies Mayor of completion
```

## Key Insight: Bottom-Up Shutdown

**Old model (wrong)**: Top-down batch shutdown - "cancel the swarm"
**New model (right)**: Bottom-up individual shutdown - polecat requests, Witness executes

This enables streaming:
- Workers come and go continuously
- No "swarm end" to trigger cleanup
- Each worker manages its own lifecycle
- Witness is the lifecycle authority

## Implementation

1. Add `gt handoff` command for polecats to request shutdown
2. Modify gt spawn to always create fresh worktree
3. Run bd init in new worktree (beads needs initialization)
4. Add shutdown request handler to Witness
5. Witness verifies handoff, then cleans up:
   - Kill session
   - Remove worktree
   - Delete branch
6. Remove 'idle' state from polecat state machine
7. Simplify gt polecat list (only shows active)

## Impact on Other Tasks

- gt-17r (Zombie cleanup): Becomes trivial - orphan worktrees
- gt-4my (Worker health): Simpler - no idle/stuck ambiguity
- gt-f9x.5/f9x.6 (Doctor): Fewer states to validate
- gt-eu9 (Witness handoff): Witness receives polecat shutdown requests


Beads CLI wrapper: shell out to bd

Wrapper for bd (beads CLI) commands.

## Interface

```go
type Beads struct {
    workDir string
}

func NewBeads(workDir string) *Beads

// Query
func (b *Beads) List(opts ListOptions) ([]*Issue, error)
func (b *Beads) Ready() ([]*Issue, error)
func (b *Beads) Show(id string) (*Issue, error)
func (b *Beads) Blocked() ([]*Issue, error)

// Mutations
func (b *Beads) Create(opts CreateOptions) (*Issue, error)
func (b *Beads) Update(id string, opts UpdateOptions) error
func (b *Beads) Close(ids ...string) error

// Sync
func (b *Beads) Sync() error
func (b *Beads) SyncStatus() (*SyncStatus, error)
```

## Data Types

```go
type Issue struct {
    ID          string
    Title       string
    Status      string
    Priority    int
    Type        string
    Description string
    Parent      string
    Children    []string
    DependsOn   []string
    Blocks      []string
}

type ListOptions struct {
    Status   string  // "open", "closed", "all"
    Type     string
    Priority int
}

type CreateOptions struct {
    Title       string
    Type        string
    Priority    int
    Description string
    Parent      string
}
```

## Implementation

Shell out to bd binary, parse JSON output where available.
```go
func (b *Beads) runBd(args ...string) ([]byte, error) {
    cmd := exec.Command("bd", args...)
    cmd.Dir = b.workDir
    return cmd.Output()
}
```

## Error Handling

- bd not installed: Clear error with install instructions
- Not a beads repo: Detect and report
- Sync conflicts: Parse and report


Design: Polecat Beads write access

Design for granting polecats direct beads write access.

## Background

With Beads v0.30.0 tombstone-based rearchitecture, we have solid multi-agent support. Reversing the original read-only decision.

## Benefits

- Simplifies architecture (no mail-based issue filing proxy)
- Empowers polecats to file discovered work
- Beads handles work-disavowal

## Complications

For OSS projects where you cannot commit to project .beads/, need per-rig beads repo configuration.

## Subtasks (implementation)

- gt-zx3: Per-rig beads configuration schema
- gt-e1y: Worker prompting updates for beads access
- gt-cjb: Witness proxy removal
- gt-082: Beads sync in decommission checklist

**Design complete.** Each subtask has full specification in its description.


Silent error handling with _ = err patterns

Multiple locations intentionally ignore errors with comments like 'Ignore errors'. While some are valid (best-effort operations), others should be audited:

- witness/manager.go:542 - Ignores cmd.Run() error
- refinery/manager.go:411, 438, 509 - Ignores loadState and git pull errors
- swarm/manager.go:47 - Ignores getGitHead error
- polecat/manager.go:69, 284 - Ignores pool.Load and DeleteBranch errors
- swarm/integration.go:101, 137 - Ignores git pull and push errors

Each should be evaluated: log it, handle it, or confirm ignoring is intentional.


Update Refinery to use Beads merge queue

Replace branch discovery with Beads queue in the Refinery module:

Current (internal/refinery/manager.go):
- Scans for polecat/* branches
- Creates MR objects on-the-fly

New:
- Pull from Beads: bd ready --type=merge-request
- Process each MR
- Close with merge commit: bd close <id> --reason="Merged at <sha>"
- Handle failures: bd update <id> --status=blocked --reason="..."

The Engineer (agent) becomes Beads-native.
The Refinery (module) provides the infrastructure.


Phase 4.1: mol-deacon-patrol uses ephemeral

Deacon patrol cycles run as ephemeral molecules.

## Current Deacon Loop

```
while running:
    check_heartbeat()
    check_mail()
    sleep(interval)
```

## Molecule-Based Loop

```
while running:
    mol = bd mol bond mol-deacon-patrol-cycle --ephemeral
    execute_cycle(mol):
        check_heartbeat()
        check_mail()
        log_status()
    summary = generate_cycle_summary()
    bd squash mol --summary summary
    sleep(interval)
```

## Benefits

- Each cycle is tracked
- Digests show daemon health over time
- Can query: 'show me patrol cycles from last hour'
- Crash mid-cycle → ephemeral shows where we were


plugin-run

Execute plugins from ~/gt/plugins/. Check gates, run eligible plugins.


Improve test coverage in low-coverage packages

Several packages have low test coverage:
- internal/cmd: 6.8%
- internal/mail: 3.6%
- internal/daemon: 12.1%
- internal/doctor: 14.5%
- internal/refinery: 20.6%
- internal/session: 27.8%
- internal/git: 28.8%

Priority should be given to mail, cmd, and daemon packages which handle critical functionality.


Molecule Workflow Engine: Composable Crystallized Workflows

# Epic: Molecule Workflow Engine

**Vision**: Molecules are crystallized, composable, nondeterministic-idempotent workflow templates. Any worker can pick up where any other worker was interrupted and continue along the molecule.

**Christmas Target**: Full molecule-based workflow engine operational by Dec 25, 2025.

## The Core Concepts

1. **Molecule**: Read-only workflow template (beads issue with type=molecule)
2. **Atom/Step**: Individual work unit with prose instructions
3. **Bond**: Dependency between steps
4. **Polymer/Derived**: Molecule composed from other molecules
5. **Instance**: Concrete beads created when molecule is attached to work

## Key Features Needed

### 1. Molecule Composition (Includes Directive)
Molecules can include other molecules:
\`\`\`markdown
## Molecule: gastown-polecat
Includes: mol-engineer-in-box

## Step: install-binary
Build and install the local gt binary.
Needs: submit
\`\`\`

### 2. Standard Molecules
- mol-install-go-binary: Single step to build/install gt
- mol-gastown-polecat: engineer-in-box + install-binary

### 3. Spawn Integration
\`gt spawn --issue <id> --molecule <mol-id>\` creates molecule instance then starts polecat on first ready step.

### 4. Nondeterministic Idempotence
- Steps are atomic (pending → in_progress → completed)
- Any worker can pick up any ready step
- Step timeout/recovery for stuck workers

## Success Criteria
- [ ] Polecats can be spawned with mol-gastown-polecat
- [ ] Derived molecules work end-to-end
- [ ] 10+ polecat swarm completes molecule workflows
- [ ] install-go-binary step runs after successful merges


Merge: gt-h5n.5

branch: polecat/Scabrous
target: main
source_issue: gt-h5n.5
rig: gastown


gt refinery attach: Attach to refinery session

Add 'gt refinery attach [rig]' command to attach to refinery tmux session.

Mirrors 'gt mayor attach' pattern. If rig not specified, use current rig context.


Simplify Go daemon to Deacon-watcher

Refactor internal/daemon to only: (1) check deacon/heartbeat.json every 60s, (2) poke gt-deacon if stale, (3) restart Deacon and mail for help if very stale. Remove all lifecycle processing and agent poking.


Merge: gt-3x0z.1

branch: polecat/furiosa
target: main
source_issue: gt-3x0z.1
rig: gastown


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


mol-polecat-work

Full polecat lifecycle from assignment to decommission.

This proto enables nondeterministic idempotence for polecat work.
A polecat that crashes after any step can restart, read its molecule state,
and continue from the last completed step. No work is lost.

Variables:
- {{issue}} - The source issue ID being worked on


Inconsistent error wrapping patterns

Error handling is inconsistent across the codebase:

1. Some functions use fmt.Errorf with %w for wrapping, others don't
2. return nil, nil patterns (40+ occurrences) sometimes represent 'not found' and sometimes 'error but continue' - should use sentinel errors
3. Some places return nil for errors when they should propagate them

Examples of nil,nil that might need review:
- internal/git/git.go:272, 308
- internal/crew/manager.go:227
- internal/witness/manager.go:517, 523, 530, 775
- internal/beads/beads.go:225, 492


Merge: beads-2nh

branch: fix/spawn-beads-path
target: main
source_issue: beads-2nh
rig: gastown


Consolidate configuration architecture: three-tier model

Rationalize Gas Town's scattered configuration into a clean three-tier model:

## Current Problems
- Config split across mayor/, .gastown/, and rig/config.json
- Runtime state mixed with configuration
- Hidden directories (.gastown/) are missed by agents
- Category confusion: identity vs config vs runtime state

## Proposed Architecture

### Tier 1: Town Config (mayor/)
```
mayor/
├── town.json      # Town identity (unchanged)
├── rigs.json      # Rig registry (unchanged)
└── config.json    # NEW: Town-level configuration
    # theme defaults, daemon settings, etc.
```

### Tier 2: Town Runtime (.runtime/)
```
~/gt/.runtime/                    # NEW: Gitignored
├── daemon.json                   # {pid, started_at, heartbeat}
├── deacon.json                   # {cycle, last_action}
└── agent-requests.json           # Lifecycle requests
```

### Tier 3: Rig Config (settings/)
```
<rig>/
├── config.json                   # Rig identity only (type, git_url, beads.prefix)
├── settings/                     # NEW: Visible, git-tracked
│   ├── config.json               # theme, merge_queue, max_workers
│   ├── namepool.json             # pool settings (style, max)
│   └── roles/                    # Per-role overrides (optional)
└── .runtime/                     # NEW: Gitignored
    ├── witness.json              # {state, started_at, stats}
    ├── refinery.json             # {state, started_at, stats}
    └── namepool-state.json       # {in_use, overflow_next}
```

## Key Principles
1. **Visible > Hidden** for config agents need to find
2. **Git-tracked** for identity and config; **gitignored** for runtime
3. **Separation of concerns**: identity, config, runtime are distinct
4. **Locality**: town config at town root, rig config at rig root

## Migration
- Move .gastown/ contents to appropriate new locations
- Update all code that reads/writes these files
- Update .gitignore patterns
- Update documentation (architecture.md, CLAUDE.md)


test message


Work on ga-yp3: Polecat inbox system for reliable work as...

Work on ga-yp3: Polecat inbox system for reliable work assignment. This is P1 priority. See bd show ga-yp3 for full design spec.


Remove stale migration docs from gastown-py

The gastown-py repo has migration-related documentation that is now misinformation since we have made design decisions. Remove or clearly mark as obsolete: any docs about migration paths, old architecture assumptions, or superseded designs.


request-shutdown


verify-tests

Run existing tests. Add new tests for new functionality.
Ensure adequate coverage.

go test ./...

Fix any test failures before proceeding.

Depends: implement


Define Engineer as the Refinery agent role

Clarify the distinction:

- **Refinery** = place/module/directory/workspace
  - `<rig>/refinery/` directory structure
  - `gt refinery start/stop/status` commands
  - tmux session name: `refinery` or `<rig>-refinery`

- **Engineer** = role/agent who works in the Refinery
  - CLAUDE.md prompting: "You are an Engineer..."
  - Documentation: "The Engineer processes merge requests..."
  - Mail address: `<rig>/engineer` (or `<rig>/refinery`?)

Updates needed:
- Add Engineer role description to docs
- Update CLAUDE.md templates for refinery agents
- Keep `gt refinery` commands as-is (they manage the place)
- Internal code stays `internal/refinery/` (the module)

Future consideration: Multiple Engineers in one Refinery for parallel merge processing.


Merge: gt-g44u.2

branch: polecat/Doof
target: main
source_issue: gt-g44u.2
rig: gastown


gt witness: Witness management commands

Add 'gt witness' command group for witness lifecycle management.

Subcommands:
- gt witness start [rig] - Start witness for a rig
- gt witness stop [rig] - Stop witness
- gt witness status [rig] - Show witness status
- gt witness attach [rig] - Attach to witness session

Witness monitors polecats and handles:
- Idle detection and cleanup
- Session health checks
- Nudging stuck agents


Recover stale polecat work: 4 branches with unpushed commits

During observation of polecat workflow, found 4 polecats with unpushed work:

## Branches Pushed (preserved)
- polecat/capable: 3 commits (molecule catalog, doctor orphan detection, gt done)
- polecat/dementus: 4 commits (Witness MVP, handoff fixes)
- polecat/furiosa: 2 commits (bulk polecat removal, spawn handoff)
- polecat/rictus: 1 commit (molecule docs)

## Action Required
1. Review each branch for merge-worthiness
2. Either:
   a. Create PRs for valuable work
   b. OR discard if superseded
3. After decision, clean up polecats properly

## Root Cause
Polecats were not cleaned up after previous work sessions. This is exactly why we need:
- gt-u1k: gt shutdown should fully cleanup polecats
- gt-8v8: Refuse to lose uncommitted work
- gt-9nf: Always create fresh polecats


session stop: --force flag is defined but not used


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue (gt-qwyu) and understand the requirements.
Identify any blockers or missing information.


GGT vs PGT Gap Analysis Summary

Summary of gaps comparing GGT (~4,500 LOC) to PGT (~27,700 LOC).

## Critical Gaps (P1) - Existing Issues
- gt-u1j.17: Polecat CLI (add, list, wake, sleep) - DETAILED
- gt-u1j.16: Rig CLI (add, list, show, remove) - DETAILED
- gt-u1j.18: Witness CLI (start, stop, status) - DETAILED
- gt-f9x.4: Doctor framework - DETAILED
- gt-f9x.5: Workspace doctor checks - DETAILED
- gt-f9x.6: Rig doctor checks - DETAILED

## Critical Gaps (P1) - New Issues
- gt-a95: Refinery background daemon mode - ENHANCED
- gt-hgk: Mail message types and threading - ENHANCED

## Significant Gaps (P2) - New Issues
- gt-d46: Mail CLI archive/purge/search - ENHANCED
- gt-e9k: Swarm preflight/postflight - ENHANCED
- gt-662: Swarm report generation - ENHANCED
- gt-69l: Hook system - ENHANCED
- gt-3yj: Agent monitoring - ENHANCED
- gt-1ky: Workspace CLI (may overlap f9x.3) - ENHANCED
- gt-9j9: Worker status reporting - ENHANCED
- gt-qao: Mayor CLI - ENHANCED
- gt-7o7: Session pre-shutdown checks - ENHANCED
- gt-c92: Batch all command - ENHANCED
- gt-lno: Swarm state persistence - ENHANCED
- gt-a9y: File locking - ENHANCED
- gt-30o: Error handling improvements - ENHANCED

## Significant Gaps (P2) - Existing Issues
- gt-kmn.12: Ephemeral rig support - DETAILED

## Lower Priority (P3) - New Issues
- gt-3fm: Mail orchestrator daemon - ENHANCED
- gt-2kz: Cleanup commands - ENHANCED
- gt-ebl: Names commands - ENHANCED
- gt-1u9: Interactive prompts - ENHANCED
- gt-8lz: Help text improvements - ENHANCED

## Closed as Duplicates
- gt-3tz → gt-u1j.17 (polecat CLI)
- gt-e1r → gt-u1j.16 (rig CLI)
- gt-86w → gt-f9x.4/5/6 (doctor)
- gt-alx → gt-kmn.12 (ephemeral rigs)

## Execution Order Recommendation
1. P1 CLI commands (existing detailed issues ready to implement)
2. gt-a95: Refinery daemon (blocks autonomous operation)
3. gt-7o7: Pre-shutdown checks (prevents data loss)
4. gt-a9y: File locking (prevents corruption)
5. gt-hgk + gt-d46: Mail improvements
6. gt-69l: Hook system (enables extensibility)
7. Remaining P2s in any order
8. P3s as time permits


Merge: gt-3x1

branch: polecat/Slit
target: main
source_issue: gt-3x1
rig: gastown


Overhaul gt mol to match bd mol chemistry interface

## The Sling: Unified Work Dispatch

This issue tracks the overhaul of `gt molecule` to align with chemistry metaphor and introduce the **Universal Gas Town Propulsion Principle**.

### The Propulsion Principle

> **If you find something on your hook, YOU RUN IT.**

This is the one rule that drives all Gas Town agents.

### The Sling Operation

`gt sling <thing> <target> [options]` - unified command for spawn + assign + pin.

See: `gastown/mayor/rig/docs/sling-design.md`

### Implementation Tasks

| Issue | Title | Priority |
|-------|-------|----------|
| gt-4ev4 | Implement gt sling command | P1 |
| gt-uym5 | Implement gt mol status command | P1 |
| gt-i4kq | Update templates for Propulsion Principle | P1 |
| gt-7hor | Document the Propulsion Principle | P2 |

### Command Changes

| Old | New |
|-----|-----|
| `gt molecule instantiate` | `gt sling` |
| `gt molecule attach` | `gt sling --force` |
| `gt molecule detach` | `gt mol burn` |
| `gt molecule progress` | `gt mol status` |
| `gt molecule list` | `gt mol catalog` |
| `gt spawn --molecule` | `gt sling` |

### Acceptance Criteria

- [ ] `gt sling` works for protos, issues, and epics
- [ ] `gt mol status` shows hook state
- [ ] Templates updated for propulsion principle
- [ ] Old commands deprecated with warnings
- [ ] Documentation complete


Merge: gt-qna4

branch: polecat/capable
target: main
source_issue: gt-qna4
rig: gastown


Witness daemon: heartbeat loop, spawn ephemeral agent

Background daemon for agent lifecycle and monitoring.

## Core Responsibilities

1. **Heartbeat monitoring**: Check agent health periodically
2. **Session lifecycle**: Restart agents after handoff (Witness Protection)
3. **Polecat monitoring**: Track worker progress, nudging
4. **Escalation**: Report failures to Mayor

## Session Lifecycle (Witness Protection)

The daemon enables autonomous long-running operation by cycling agent sessions:

```go
type SessionLifecycle struct {
    AgentType string  // "witness", "refinery"
    StatePath string  // path to state.json
}

func (d *Daemon) monitorSessionLifecycle(agent SessionLifecycle) {
    // 1. Detect session exit
    // 2. Check state.json for requesting_cycle: true
    // 3. If cycle requested: start new session, clear flag
    // 4. If unexpected exit: escalate to Mayor
}
```

See architecture.md Key Decision #12: Agent Session Lifecycle.

## Interface

```go
type Daemon struct {
    rig      *Rig
    polecats *PolecatManager
    sessions *SessionManager
    config   DaemonConfig
}

type DaemonConfig struct {
    HeartbeatInterval time.Duration  // default: 30s
    NudgeThreshold    int            // nudges before escalation
    MaxWorkers        int            // from rig config
}

func NewDaemon(rig *Rig) *Daemon
func (d *Daemon) Start() error
func (d *Daemon) Stop() error

// Lifecycle
func (d *Daemon) CycleSession(agentType string) error
func (d *Daemon) SpawnWorker(issueID string) error
func (d *Daemon) ShutdownWorker(polecat string) error
```

## Heartbeat Loop

Every HeartbeatInterval:
1. Check Witness session (restart if cycle requested)
2. Check Refinery session (restart if cycle requested)
3. For each active polecat: assess progress, nudge if stuck
4. Query `bd ready` for new work, spawn up to max_workers


Update architecture.md: Engineer role and Beads merge queue

Update docs/architecture.md with recent design decisions:

1. Agent table: Change "Refinery" role to "Engineer"
   - Refinery = place/module/directory
   - Engineer = role (agent that works in the Refinery)

2. Merge Queue section: Document Beads-native model
   - MRs are beads issues with --type=merge-request
   - gt mq commands (submit, list, next, process, reorder)
   - Ordering via depends-on links

3. CLI section: Add gt mq commands

4. Key Design Decisions: Add decisions for:
   - #15: Merge Queue in Beads
   - #16: Engineer role (distinct from Refinery place)
   - #17: Session restart protocol for Engineer


Document merge queue architecture

Update docs/architecture.md with:

- Merge Queue section explaining Beads-native approach
- Engineer role (renamed from Refinery)
- Session restart protocol
- gt mq command reference
- Federation considerations for queue

Also update any references to .gastown/ → config/.


Design molecule step hooks

Hooks that fire between molecule steps. When a bead in a molecule closes, trigger hook that can spawn agent attention to prompts/requests. This enables reactive orchestration - the molecule drives, hooks respond. Gas Town feature built on Beads data plane.


Deacon marching orders: pinned bead with rounds molecule

Create a pinned bead that defines the Deacon's rounds molecule - its "kernel".

## Concept

Like `gt prime` gives agents their context, a pinned bead gives the Deacon
its operating instructions. This bead defines:

1. The rounds molecule (steps to execute each wake)
2. Registered plugins (scheduled, event-triggered)
3. Configuration (timeouts, thresholds, escalation rules)

## Pinned Bead Structure

```yaml
# gt-deacon-kernel (pinned)
title: "Deacon Kernel Configuration"
type: policy
pinned: true

molecule: mol-deacon-rounds
  steps:
    - session-check: "Check context budget, cycle if needed"
    - health-scan: "Check Mayor, Witnesses, Refineries, Crew"
    - lifecycle: "Process pending lifecycle requests"
    - plugins: "Run due scheduled plugins"
    - events: "Process timer callbacks, event subscriptions"
    - complete: "Update heartbeat, return to wait"

plugins:
  scheduled:
    - name: beads-hygiene
      schedule: "0 2 * * *"  # 2 AM daily
    - name: branch-cleanup
      schedule: "0 4 * * 0"  # 4 AM Sundays

  event_triggers:
    - event: "issue.created"
      plugin: work-oracle
    - event: "mr.submitted"
      plugin: review-oracle

config:
  session_cycle_threshold_turns: 50
  session_cycle_threshold_hours: 4
  health_scan_timeout_seconds: 60
  plugin_timeout_minutes: 30
  escalation_after_failures: 3
```

## Reading Marching Orders

On wake, Deacon:
1. `bd show --pinned` to find the kernel bead
2. Parse molecule steps
3. Execute in order

## Updating the Kernel

To change Deacon behavior:
1. `bd update gt-deacon-kernel` with new config
2. Next wake cycle picks up changes
3. No code changes required

## Bootstrap

If no pinned bead exists, Deacon uses hardcoded defaults from DEACON.md.
First installation creates the pinned bead.


gt spawn: add --polecat flag for explicit worker selection

Currently gt spawn requires positional arg format:
```
gt spawn gastown/Angharad --issue gt-xyz
```

But I tried the more intuitive flag form:
```
gt spawn --issue gt-xyz --polecat Angharad
```

This failed with 'unknown flag: --polecat'.

The flag form is more discoverable and consistent with other commands. Add --polecat flag as alternative to positional arg.


Epic: Wisp Molecule Integration

## Vision

Integrate Beads wisp molecules into Gas Town. All orchestration work runs as wisp molecules - patrols, polecat workflows, batch operations. Only digests reach main beads.

## The Steam Engine Metaphor

```
Engine does work → generates steam
Steam wisps rise → execution trace
Steam condenses → digest (distillate)
Steam dissipates → cleaned up (burned)
```

## Architecture

```
Proto Molecules (templates)
    ↓ bd mol bond
Wisps (.beads-wisps/ or inline)
    ↓ bd mol squash + AI summary
Main Beads (digests only)
```

## Vocabulary

| Term | Meaning |
|------|---------|
| bond | Attach proto to work (creates wisps) |
| wisp | Temporary execution step (steam rising) |
| squash | Condense wisps into digest |
| burn | Destroy wisps without record |
| digest | Permanent condensed record (distillate) |

## Key Design Decisions

1. **Wisp location**: Per-rig or inline in main beads with wisp flag
2. **Summary generation**: Agent that did work generates summary (inversion of control)
3. **Squash timing**: Final step of molecule workflow, before signaling done
4. **Crash recovery**: Wisps persist, Witness detects stalls, new agent resumes
5. **Patrols**: Each cycle is fresh wisp molecule, squashed on completion

## Digest Contents

- Molecule type and instance ID
- Assignee, start/end times
- Source issue reference
- AI-generated summary
- Outcomes (issues closed, commits, branches)

## Integration Points

- gt rig init: Configure wisp storage
- gt spawn --molecule: Bond creates wisps
- gt prime: Show wisp molecule context
- Polecat CLAUDE.md: Summary + squash protocol
- gt doctor: Wisp health checks
- Deacon/Witness/Refinery: Patrol molecules

## Phases

Phase 1: Wisp setup infrastructure
Phase 2: Spawn integration
Phase 3: Completion flow (summary + squash)
Phase 4: Patrol integration
Phase 5: Documentation and polish


Add unit tests for daemon package

The daemon package has no unit tests. Need tests for:
- Config and state serialization
- Session name pattern matching (isWitnessSession)
- Lifecycle request parsing
- Identity to session mapping


Daemon: configurable heartbeat interval

Heartbeat interval is hardcoded to 60s. Should be configurable via:
- town.json config
- Command line flag
- Environment variable

Default 60s is reasonable but some deployments may want faster/slower.


Error handling improvements: retry logic and recovery hints

Improve error handling across GGT codebase.

## Issues Found

### 1. Silent Failures in Refinery
manager.go ProcessMR():
- git pull errors ignored
- Continues processing even on partial failures

### 2. Missing Beads CLI
Many operations silently continue if `bd` not found:
```go
// Current
tasks, err := m.loadTasksFromBeads(epicID)
if err != nil {
    // Non-fatal - swarm can start without tasks
}

// Better
if err != nil {
    return nil, fmt.Errorf("beads required: %w", err)
}
```

### 3. No Retry Logic
Network/lock errors should retry:
```go
func withRetry(attempts int, delay time.Duration, fn func() error) error {
    for i := 0; i < attempts; i++ {
        if err := fn(); err == nil {
            return nil
        }
        time.Sleep(delay)
    }
    return fmt.Errorf("failed after %d attempts", attempts)
}
```

### 4. Recovery Hints
Error messages should include fix suggestions:
```go
// Current
return fmt.Errorf("polecat not found")

// Better
return fmt.Errorf("polecat '%s' not found. Use 'gt polecat list' to see available polecats", name)
```

## Domain Error Types
```go
type SessionError struct {
    Op      string
    Polecat string
    Err     error
}

func (e *SessionError) Error() string {
    return fmt.Sprintf("session %s for %s: %v", e.Op, e.Polecat, e.Err)
}
```

## Files to Review
- internal/refinery/manager.go
- internal/swarm/manager.go
- internal/session/manager.go
- All cmd/*.go files

## Acceptance Criteria
- [ ] No silent error swallowing
- [ ] Retry logic for transient failures
- [ ] Helpful error messages with hints
- [ ] Consistent error types per domain


Design: Additional design issues (placeholder)

Placeholder for additional design issues the user wants to raise and work through. Convert to specific subtasks as issues are identified.


CLI: cleanup commands for stale state

Cleanup commands for recovering from stale state.

## Commands

### gt cleanup <polecat>
Clean stale state for specific polecat.
```
gt cleanup <rig>/<polecat> [--dry-run]
```

Actions:
- Remove orphaned state.json if clone missing
- Clear stale session references
- Reset stuck state (working → idle after timeout)

### gt cleanup --all
Clean all polecats in workspace.
```
gt cleanup --all [--dry-run]
```

## Implementation
```go
func CleanupPolecat(rigName, polecatName string, dryRun bool) (*CleanupResult, error)

type CleanupResult struct {
    OrphanedStateRemoved bool
    SessionsCleared      int
    StateReset           bool
    Warnings             []string
}
```

## Overlap with Doctor
- Doctor diagnoses and offers --fix
- Cleanup is more aggressive state recovery
- Consider merging into doctor --fix

## New File
internal/cmd/cleanup.go

## Acceptance Criteria
- [ ] Removes orphaned state files
- [ ] Clears stale session refs
- [ ] --dry-run shows what would happen
- [ ] Reports all actions taken


submit-merge

Submit to merge queue. Create branch if needed.
Verify CI passes.

gt done  # Signal work ready for merge queue

If there are CI failures, fix them before proceeding.

Depends: rebase-main


Outpost/Worker interfaces: Core abstractions for remote compute

## Overview

Define the core interfaces that all outpost types implement.

## Interfaces

```go
type OutpostType string
const (
    OutpostLocal    OutpostType = "local"
    OutpostSSH      OutpostType = "ssh"
    OutpostCloudRun OutpostType = "cloudrun"
)

type Outpost interface {
    Name() string
    Type() OutpostType
    MaxWorkers() int
    ActiveWorkers() int
    Spawn(issue string, config WorkerConfig) (Worker, error)
    Workers() []Worker
    Ping() error
    SendMail(worker string, msg Message) error  // optional
}

type Worker interface {
    ID() string
    Outpost() string
    Status() WorkerStatus  // idle, working, done, failed
    Issue() string
    Attach() error         // for interactive outposts
    Logs() (io.Reader, error)
    Stop() error
}

type WorkerConfig struct {
    RigPath    string
    BeadsDir   string
    GitBranch  string
    Context    map[string]string  // hints for worker
}
```

## Files

- `internal/outpost/outpost.go` - Outpost interface
- `internal/outpost/worker.go` - Worker interface
- `internal/outpost/config.go` - WorkerConfig, OutpostType

## Notes

This is the foundation for all federation work. Keep interfaces minimal - we can extend later.


Merge queue: per-rig queue management

Per-rig merge queue for coordinating polecat work.

## Concept

When polecats complete work, they submit to the merge queue. The Refinery processes the queue, merging work to main in order.

## Data Model

```go
type MergeRequest struct {
    ID        string    `json:"id"`
    Polecat   string    `json:"polecat"`
    Branch    string    `json:"branch"`
    Issue     string    `json:"issue,omitempty"`
    Status    MRStatus  `json:"status"`
    CreatedAt time.Time `json:"created_at"`
    UpdatedAt time.Time `json:"updated_at"`
}

type MRStatus string
const (
    MRPending   MRStatus = "pending"
    MRReviewing MRStatus = "reviewing"
    MRMerged    MRStatus = "merged"
    MRRejected  MRStatus = "rejected"
)
```

## Interface

```go
type MergeQueue struct {
    rig  *Rig
    path string  // <rig>/refinery/queue.jsonl
}

func NewMergeQueue(rig *Rig) *MergeQueue

// Queue operations
func (mq *MergeQueue) Submit(polecat, branch string, issue string) (*MergeRequest, error)
func (mq *MergeQueue) List() ([]*MergeRequest, error)
func (mq *MergeQueue) Next() (*MergeRequest, error)  // oldest pending
func (mq *MergeQueue) Get(id string) (*MergeRequest, error)

// Status updates
func (mq *MergeQueue) SetStatus(id string, status MRStatus) error
func (mq *MergeQueue) MarkMerged(id string) error
func (mq *MergeQueue) MarkRejected(id, reason string) error
```

## Queue Storage

JSONL file at `<rig>/refinery/queue.jsonl`. FIFO ordering.

## Git Coordination

Refinery processes queue:
1. Fetch polecat branch
2. Attempt merge to main
3. Run tests (if configured)
4. Push to origin
5. Update queue status

## Conflict Handling

If merge fails:
- Mark MR as rejected
- Notify polecat to rebase


bd create --dedup: semantic deduplication before issue creation

Before creating issue, check for semantic duplicates using AI similarity.

**From VC**: internal/deduplication/ - AI-powered batch comparison. ~300 lines.
VC had issue pollution problem: 438 issues with ~350+ spam because no early dedup.

**Gas Town implementation**: CLI flag on bd create:
```bash
bd create --dedup --title="Fix auth bug" --description="..."
```

Checks recent issues (7-day window) with AI similarity. If confidence >0.85, warns or blocks.

**Value**: Prevents pollution from parallel workers discovering same issues.

**VC lesson**: 115 issues filed in single day (Nov 2) because supervisor over-discovered without dedup. Rate limiting + dedup are essential.


Built-in molecules: engineer-in-box, quick-fix, research

Create built-in molecules as Beads issues:

## engineer-in-box

```markdown
id: mol-engineer-in-box
type: molecule
title: Engineer in a Box

Full workflow from design to merge.

## Step: design
Think carefully about architecture. Consider:
- Existing patterns in the codebase
- Trade-offs between approaches
- Testability and maintainability

Write a brief design summary before proceeding.

## Step: implement
Write the code. Follow codebase conventions.
Needs: design

## Step: review
Self-review the changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
Needs: implement

## Step: test
Write and run tests. Cover happy path and edge cases.
Fix any failures before proceeding.
Needs: implement

## Step: submit
Submit for merge via refinery.
Needs: review, test
```

## quick-fix

```markdown
id: mol-quick-fix
type: molecule
title: Quick Fix

Fast path for small changes.

## Step: implement
Make the fix. Keep it focused.

## Step: test
Run relevant tests. Fix any regressions.
Needs: implement

## Step: submit
Submit for merge.
Needs: test
```

## research

```markdown
id: mol-research
type: molecule
title: Research

Investigation workflow.

## Step: investigate
Explore the question. Search code, read docs,
understand context. Take notes.

## Step: document
Write up findings. Include:
- What you learned
- Recommendations
- Open questions
Needs: investigate
```

## Storage

Built-in molecules live in `<town>/.beads/` as regular issues.
Created during `gt install` or `bd init`.


gt spawn/crew setup should create .beads/redirect for worktrees

Crew clones and polecats need a .beads/redirect file pointing to the shared beads database (../../mayor/rig/.beads). Currently:

- redirect files can get deleted by git clean
- not auto-created during gt spawn or worktree setup
- missing redirects cause 'no beads database found' errors

Found missing in: gastown/joe, beads/zoey (after git clean)

Fix options:
1. gt spawn creates redirect during worktree setup
2. gt prime regenerates missing redirects
3. bd commands auto-detect worktree and find shared beads

This should be standard Gas Town rig configuration.


Batch Work System: Integration branch, merge queue, landing

## Overview

This epic tracks batch work coordination in GGT. Key insight: **work is a stream, not discrete swarms**.

There are no "swarm IDs" - the epic IS the grouping, the merge queue IS the coordination. "Swarming an epic" is colloquial for spawning multiple workers on its children.

## Architecture

- **Epics** group related work
- **Issues** are individual tasks
- **Dependencies** encode ordering (multi-wave emerges automatically)
- **Merge queue** coordinates completed work
- **Workers** process issues independently

See Key Decision #11 in docs/architecture.md: "Work is a Stream (No Swarm IDs)"

## What This Epic Covers

1. Integration branch management for batch merges
2. Refinery semantic merge processing
3. Witness landing protocol (cleanup)
4. Report generation (epic-based, not swarm-ID-based)
5. Git safety auditing
6. Work reconciliation

## What Was Removed

- Swarm IDs (sw-1, sw-2, etc.)
- Per-swarm directories (.gastown/swarms/<id>/)
- Swarm manifest/state/events files
- swarm-started/swarm-landed beads

These were redundant - beads already provides hierarchy, status, dependencies, and history.

## References

- Architecture: docs/architecture.md (Key Decision #11, Multi-Wave Work Processing)
- PGT: swarm/manager.py, swarm/landing.py (behavioral reference, but ignore swarm ID patterns)


Merge: gt-5af.2

branch: polecat/Doof
target: main
source_issue: gt-5af.2
rig: gastown


Merge: gt-g44u.1

branch: polecat/Ace
target: main
source_issue: gt-g44u.1
rig: gastown


rebase-main

Rebase against main to incorporate any changes.
Resolve conflicts if needed.

git fetch origin main
git rebase origin/main

If there are conflicts, resolve them carefully and continue the rebase.

Depends: self-review, verify-tests


gt mail: Cross-level routing is broken

When Mayor sends mail to rig worker, message lands in wrong beads database. Sender's beads vs recipient's.


Failure handling: assign back to worker, add labels

Handle merge failures appropriately.

Failure types and actions:
| Failure     | Action                                      |
|-------------|---------------------------------------------|
| conflict    | Add needs-rebase label, assign to worker    |
| tests_fail  | Add needs-fix label, assign to worker       |
| build_fail  | Add needs-fix label, assign to worker       |
| flaky_test  | Retry once, then treat as tests_fail        |
| push_fail   | Retry with backoff, escalate if persistent  |

Actions:
1. bd update <id> --status=open --assignee=<worker>
2. bd update <id> --labels=<failure-label>
3. Send mail to worker explaining failure
4. Log failure details

Reference: docs/merge-queue-design.md#handling-failures


Merge execution: merge, test, push

Implement the actual merge execution.

Steps:
1. git checkout <mr.target>
2. git merge <mr.branch> --no-ff -m 'Merge <branch>: <title>'
3. If config.run_tests:
   - Run test_command (from config)
   - If failed: git reset --hard HEAD~1, return Failure(tests_failed)
4. git push origin <mr.target>
5. Return Success(merge_commit=HEAD)

Configuration:
- run_tests: bool (default true)
- test_command: string (default 'go test ./...')

Handle push failures with retry logic.

Reference: docs/merge-queue-design.md#process-merge-steps


Polecat management: add, remove, list, state

Polecat lifecycle: add, remove, list, state tracking.

## Data Model

```go
type Polecat struct {
    Name      string          `json:"name"`
    Rig       string          `json:"rig"`
    State     PolecatState    `json:"state"`
    ClonePath string          `json:"clone_path"`
    Branch    string          `json:"branch"`
    Issue     string          `json:"issue,omitempty"`
    CreatedAt time.Time       `json:"created_at"`
    UpdatedAt time.Time       `json:"updated_at"`
}

type PolecatState string
const (
    StateIdle       PolecatState = "idle"
    StateActive     PolecatState = "active"
    StateWorking    PolecatState = "working"
    StateDone       PolecatState = "done"
    StateStuck      PolecatState = "stuck"
)
```

## Interface

```go
type PolecatManager struct {
    rig *Rig
    git *Git
}

func NewPolecatManager(rig *Rig, git *Git) *PolecatManager

// Lifecycle
func (pm *PolecatManager) Add(name string) (*Polecat, error)
func (pm *PolecatManager) Remove(name string) error
func (pm *PolecatManager) List() ([]*Polecat, error)
func (pm *PolecatManager) Get(name string) (*Polecat, error)

// State
func (pm *PolecatManager) SetState(name string, state PolecatState) error
func (pm *PolecatManager) AssignIssue(name, issue string) error
func (pm *PolecatManager) ClearIssue(name string) error

// Convenience
func (pm *PolecatManager) Wake(name string) error   // idle → active
func (pm *PolecatManager) Sleep(name string) error  // active → idle
```

## Add Flow

1. Create directory: `<rig>/polecats/<name>/`
2. Clone rig repo into it (or copy from rig root)
3. Create new branch: `polecat/<name>`
4. Initialize polecat state file
5. Create mail inbox

## Remove Flow

1. Verify session not running
2. Check for uncommitted changes (warn/error)
3. Remove directory
4. Clean up state

## State Persistence

Store in `<rig>/polecats/<name>/state.json`


Implement gt mq CLI commands

Add gt mq subcommands as sugar over bd:

- gt mq submit: Create MR for current branch
- gt mq list: Show open merge requests
- gt mq next: Show next MR ready to process
- gt mq process: Engineer processes the queue
- gt mq reorder <id> --after <x>: Change ordering via deps
- gt mq status <id>: Show MR details

All commands should work with the Beads data plane.


CloudRunOutpost: Basic implementation

## Overview

Basic CloudRunOutpost implementation. Persistent connections and cost tracking are separate tasks.

## Implementation

```go
type CloudRunOutpost struct {
    name        string
    project     string
    region      string
    service     string
    maxWorkers  int
    client      *WorkClient
    workers     map[string]*CloudRunWorker
    mu          sync.RWMutex
}

func NewCloudRunOutpost(cfg OutpostConfig) (*CloudRunOutpost, error) {
    serviceURL := fmt.Sprintf(
        "https://%s-%s.a.run.app",
        cfg.Service, cfg.Region,
    )
    return &CloudRunOutpost{
        name:       cfg.Name,
        project:    cfg.Project,
        region:     cfg.Region,
        service:    cfg.Service,
        maxWorkers: cfg.MaxWorkers,
        client:     NewWorkClient(serviceURL),
        workers:    make(map[string]*CloudRunWorker),
    }, nil
}
```

## Spawn

```go
func (o *CloudRunOutpost) Spawn(issue string, cfg WorkerConfig) (Worker, error) {
    req := WorkRequest{
        IssueID: issue,
        Rig:     RigConfig{URL: cfg.RigURL, Branch: cfg.GitBranch},
        Beads:   BeadsConfig{URL: cfg.BeadsURL, Branch: "beads-sync"},
        Branch:  "polecat/" + issue,
    }

    events, err := o.client.DispatchWork(context.Background(), req)
    if err != nil {
        return nil, err
    }

    worker := &CloudRunWorker{
        id:      uuid.New().String(),
        outpost: o.name,
        issue:   issue,
        events:  events,
        status:  WorkerStatusWorking,
    }

    o.mu.Lock()
    o.workers[worker.id] = worker
    o.mu.Unlock()

    go worker.monitor()
    return worker, nil
}
```

## CloudRunWorker

```go
type CloudRunWorker struct {
    id      string
    outpost string
    issue   string
    status  WorkerStatus
    events  <-chan WorkEvent
    logs    []string
}

func (w *CloudRunWorker) Attach() error {
    return errors.New("Cloud Run workers do not support attach")
}

func (w *CloudRunWorker) Logs() (io.Reader, error) {
    return strings.NewReader(strings.Join(w.logs, "\n")), nil
}
```

## Files

- `internal/outpost/cloudrun.go`

## Dependencies

Depends on: gt-9a2.1 (interfaces), gt-9a2.12 (HTTP client)
Blocks: gt-9a2.13 (persistent connections), gt-9a2.14 (cost tracking)


Remove gt mail dependency on bd mail commands

Replaced bd mail send/inbox/read/ack with bd create/list/show/close. Messages are now stored as beads issues with type=message.


inbox-check

Handle callbacks from agents. Check gt mail inbox, process lifecycle requests.


mol-swarm-cleanup: Post-swarm debris cleanup molecule

After a 20+ worker swarm completed, found significant beads debris:
- 18 stale messages (work assignments, lifecycle requests, swarm instructions)
- 3 completed issues still open/in_progress
- Test messages accumulated

Need: Document a post-swarm checklist or create gt swarm cleanup command that:
1. Closes stale work assignment messages
2. Reviews in_progress issues for completion
3. Closes orphaned lifecycle messages
4. Optionally archives test messages


MQ dashboard widget: queue status in TUI

Add merge queue status widget to the Bubbletea TUI dashboard.

Display:
┌─────────────────────────────────────────────────┐
│              MERGE QUEUE STATUS                  │
├─────────────────────────────────────────────────┤
│ Pending: 3   In Progress: 1   Merged (24h): 12  │
├─────────────────────────────────────────────────┤
│ QUEUE:                                          │
│   ► gt-mr-004  P0  Nux/gt-xyz     Processing... │
│     gt-mr-005  P1  Toast/gt-abc   Ready         │
│     gt-mr-006  P1  Capable/gt-def Blocked (005) │
└─────────────────────────────────────────────────┘

Interactive features:
- Navigate queue entries
- View MR details
- Retry/reject from dashboard

Depends on: gt-u1j.2 (Bubbletea TUI dashboard)

Reference: docs/merge-queue-design.md#dashboard


Self-test

Testing gt mail works


Bug: LIFECYCLE messages use literal <rig> placeholder

Found stale LIFECYCLE messages addressed to @<rig>/witness instead of actual rig names like @gastown/witness. Template substitution not happening.

Examples found:
- gm-bay: LIFECYCLE: polecat requesting shutdown (to @<rig>/witness)
- gm-7du, gm-94e, gm-u5x, gm-89b: same issue

Fix: Ensure rig name is substituted in lifecycle mail templates.


Add gt deacon start/stop/status commands

Add CLI commands: gt deacon start (spawn gt-deacon session), gt deacon stop (kill session), gt deacon status (show health state). Similar to gt mayor commands.


CloudRun persistent connections: HTTP/2 keepalive

## Overview

Implement persistent HTTP/2 connections to keep Cloud Run containers warm.

## Problem

Cloud Run has cold start latency when scaling from 0. Persistent connections keep containers warm.

## Implementation

```go
type PersistentConnectionManager struct {
    serviceURL string
    conn       net.Conn
    client     *http2.ClientConn
    mu         sync.Mutex
    lastUsed   time.Time
    keepAlive  time.Duration
}

func (m *PersistentConnectionManager) GetConnection() (*http2.ClientConn, error) {
    m.mu.Lock()
    defer m.mu.Unlock()

    // Reuse existing connection if healthy
    if m.client != nil && m.client.CanTakeNewRequest() {
        m.lastUsed = time.Now()
        return m.client, nil
    }

    // Create new connection
    return m.dial()
}

func (m *PersistentConnectionManager) keepAliveLoop() {
    ticker := time.NewTicker(m.keepAlive / 2)
    for range ticker.C {
        m.mu.Lock()
        if time.Since(m.lastUsed) > m.keepAlive {
            // Connection idle too long, close it
            m.close()
        } else {
            // Send ping to keep alive
            m.ping()
        }
        m.mu.Unlock()
    }
}
```

## Integration with CloudRunOutpost

```go
type CloudRunOutpost struct {
    // ...existing fields...
    connMgr *PersistentConnectionManager
}

func (o *CloudRunOutpost) Spawn(...) {
    conn, err := o.connMgr.GetConnection()
    // Use connection for work dispatch
}
```

## Config

```yaml
outposts:
  - name: cloudrun-burst
    type: cloudrun
    # ...
    keep_alive: 5m  # Keep connection warm for 5 minutes
```

## Files

- `internal/cloudrun/connection.go`

## Dependencies

Depends on: gt-9a2.8 (basic CloudRunOutpost)


Merge: gt-3x1.3

branch: polecat/Doof
target: main
source_issue: gt-3x1.3
rig: gastown


Add gt crew rename command


Create mol-install-go-binary molecule

Create a single-step molecule for building and installing the gt binary.

## Molecule Definition
\`\`\`markdown
## Molecule: install-go-binary
Single step to rebuild and install the gt binary after code changes.

## Step: install
Build and install the gt binary locally.

Run from the rig directory:
\`\`\`
go build -o gt ./cmd/gt
go install ./cmd/gt
\`\`\`

Verify the installed binary is updated:
\`\`\`
which gt
gt --version  # if we have version command
\`\`\`
\`\`\`

## Implementation
1. Add to builtin_molecules.go
2. Update SeedBuiltinMolecules to include it
3. Run gt molecule seed

## Acceptance
- [ ] mol-install-go-binary exists in beads
- [ ] Can be instantiated standalone
- [ ] Can be included by other molecules


Policy beads: config in data plane

Use sentinel/policy beads for configuration instead of external config. Examples: daemon notifications on/off, heartbeat intervals. Config lives in the bead graph, can be toggled by closing/opening policy beads.


Refinery startup: Use Claude agent instead of foreground mode

WIP found in stash: Refactor refinery startup to spawn Claude as the refinery agent rather than using gt refinery start --foreground.

Changes needed:
- Use refineryDir (refinery/rig) as working directory
- Start Claude with --dangerously-skip-permissions
- Wait for shell ready, then Claude ready
- Send gt prime, then refinery startup prompt
- Remove foreground mode complexity

Related: gt-n7z7 (refinery --foreground race condition bug)


gt rig reset: clear stale mail on reset/land

## Problem

When resetting or landing a rig/town, stale mail messages can confuse agents on startup. Old handoff messages, daemon notifications, and inter-agent mail should be cleaned up as part of reset.

## Current State

- `gt rig reset` exists but doesn't clear mail
- Stale messages accumulate (e.g., daemon SHUTDOWN messages)
- Agents may read outdated context on startup

## Proposed Behavior

`gt rig reset` and `gt town reset` should:
1. Close all open messages (`--type=message`) in the relevant beads
2. Optionally preserve pinned handoff beads (clear content, keep bead)
3. Log what was cleaned up

```bash
gt rig reset gastown          # Clears gastown mail
gt rig reset gastown --mail   # Only clear mail, keep other state
gt town reset                 # Clears all town-level mail
gt town reset --all           # Clears mail in all rigs too
```

## Implementation

1. Query `bd list --type=message --status=open`
2. Close each with reason 'Cleared during reset'
3. For pinned handoffs: `bd update <id> --description=''` instead of close


gt crew list: List crew workspaces

Implement 'gt crew list [--rig <rig>]' command:
- List all crew workers in rig(s)
- Show status (session running, last activity)
- Show current branch and git status summary
- Support --json output