HTTP work server: gt worker serve command

## Overview

HTTP server that runs inside Cloud Run containers, accepting work requests.

## Command

```bash
gt worker serve --port 8080
```

## Implementation

```go
type WorkServer struct {
    port    int
    handler *WorkHandler
}

func (s *WorkServer) ServeHTTP(w http.ResponseWriter, r *http.Request) {
    switch r.URL.Path {
    case "/work":
        s.handleWork(w, r)
    case "/health":
        s.handleHealth(w, r)
    default:
        http.NotFound(w, r)
    }
}

func (s *WorkServer) handleWork(w http.ResponseWriter, r *http.Request) {
    // 1. Parse WorkRequest
    // 2. Clone/pull repo
    // 3. Start Claude on issue
    // 4. Stream WorkEvents as NDJSON
    // 5. Return WorkResult
}
```

## Streaming Response

```go
func (s *WorkServer) streamEvents(w http.ResponseWriter, events <-chan WorkEvent) {
    flusher, _ := w.(http.Flusher)
    encoder := json.NewEncoder(w)
    for event := range events {
        encoder.Encode(event)
        flusher.Flush()
    }
}
```

## Files

- `internal/cloudrun/server.go`
- `cmd/gt/worker_serve.go` - Cobra command

## Dependencies

Depends on: gt-9a2.7 (protocol types)


Haiku-based smart stuck detection

Use Haiku to analyze tmux state when signals are ambiguous.

## When to Invoke

Only as escalation tier:
1. Keepalive is stale (> 2 min)
2. Tmux shows claude is running (not idle shell)
3. Heuristics can't determine state

## Prompt

Capture last 50 lines of tmux pane, ask Haiku:
'Is this Claude agent: WORKING | STUCK | IDLE | WAITING_FOR_HUMAN?'

## Cost

~$0.001 per check. At 1 check/min worst case = $0.06/hour.
In practice, most checks avoided by keepalive signal.

## Configuration

```toml
[daemon]
smart_detection = true
smart_model = "haiku"
smart_threshold = "2m"  # only check if stale > 2min
```


CLI: worker status reporting commands

Worker status reporting CLI for polecats to report progress.

## Commands

### gt worker started
```
gt worker started <issue-id> [-m MESSAGE]
```
Reports work started on issue.

### gt worker progress
```
gt worker progress <issue-id> <0-100> [-m MESSAGE]
```
Reports percentage complete.

### gt worker blocked
```
gt worker blocked <issue-id> <reason> [-m MESSAGE]
```
Reports blocked status with reason.

### gt worker completed
```
gt worker completed <issue-id> [-m MESSAGE]
```
Reports task completion.

### gt worker failed
```
gt worker failed <issue-id> <reason> [-m MESSAGE]
```
Reports task failure.

## Implementation
Each command sends mail to refinery with structured content:
```go
type WorkerStatusReport struct {
    IssueID    string
    Status     string  // started|progress|blocked|completed|failed
    Progress   int     // 0-100 for progress
    Reason     string  // for blocked/failed
    Message    string  // optional detail
    ReportedAt time.Time
}
```

## Message Format
Subject: "[STATUS] <issue-id>: <status>"
Body: JSON-encoded WorkerStatusReport

## Default Recipient
```go
// Determine from context
func getDefaultRecipient() string {
    rig := os.Getenv("GT_RIG")
    if rig != "" {
        return rig + "/refinery"
    }
    return "refinery/"
}
```

## New File
internal/cmd/worker.go

## PGT Reference
gastown-py/src/gastown/cli/worker_cmd.py

## Acceptance Criteria
- [ ] All 5 commands implemented
- [ ] Status sent as mail to refinery
- [ ] Structured JSON body for parsing
- [ ] Works from polecat session context


Design: Plugin architecture (agents-as-plugins)

Plugin system where plugins are just additional agents with identities, mailboxes, and beads access. See docs/architecture.md Plugins section. No special framework - just directory conventions and mail-based invocation.


Implement gt mq CLI commands

Add gt mq subcommands as sugar over bd:

- gt mq submit: Create MR for current branch
- gt mq list: Show open merge requests
- gt mq next: Show next MR ready to process
- gt mq process: Engineer processes the queue
- gt mq reorder <id> --after <x>: Change ordering via deps
- gt mq status <id>: Show MR details

All commands should work with the Beads data plane.


Enhanced polecat decommission prompting

Add decommission checklist to polecat AGENTS.md.template. Make crystal clear: verify ALL before signaling done.

## Checklist for AGENTS.md.template

```markdown
## Decommission Checklist

**CRITICAL**: Before signaling done, you MUST complete this checklist.
The Witness will verify each item and bounce you back if dirty.

### Pre-Done Verification

```bash
# 1. Git status - must be clean
git status
# Expected: "nothing to commit, working tree clean"

# 2. Stash list - must be empty
git stash list
# Expected: (empty output)

# 3. Beads sync - must be up to date
bd sync --status
# Expected: "Up to date" or "Nothing to sync"

# 4. Branch merged - your work must be on main
git log main --oneline -1
git log HEAD --oneline -1
# Expected: Same commit
```

### If Any Check Fails

- **Uncommitted changes**: Commit them or discard if unnecessary
- **Stashes**: Pop and commit, or drop if obsolete
- **Beads out of sync**: Run `bd sync`
- **Branch not merged**: Complete the merge workflow

### Signaling Done

Only after ALL checks pass:

```bash
bd close <issue-id>
bd sync
town mail send <rig>/witness -s "Work Complete" -m "Issue <id> done."
```
```

## Implementation

Add to AGENTS.md.template in the polecat prompting section.


gt prime: Refinery context detection and output

Update gt prime to detect Refinery role:
- Detect from directory: refinery/rig/ = Refinery
- Show handoff bead reference
- Show merge queue status
- Show polecat branches with unmerged commits
- Show last actions summary


Test message

Testing GGT mail system


Daemon: integration test with real lifecycle

Need an end-to-end test that:
1. Starts daemon
2. Starts a test agent session
3. Sends lifecycle request to daemon
4. Verifies session was killed and restarted
5. Cleans up

Could use a mock 'agent' that's just a shell script.


Polecat management: add, remove, list, state

Polecat lifecycle: add, remove, list, state tracking.

## Data Model

```go
type Polecat struct {
    Name      string          `json:"name"`
    Rig       string          `json:"rig"`
    State     PolecatState    `json:"state"`
    ClonePath string          `json:"clone_path"`
    Branch    string          `json:"branch"`
    Issue     string          `json:"issue,omitempty"`
    CreatedAt time.Time       `json:"created_at"`
    UpdatedAt time.Time       `json:"updated_at"`
}

type PolecatState string
const (
    StateIdle       PolecatState = "idle"
    StateActive     PolecatState = "active"
    StateWorking    PolecatState = "working"
    StateDone       PolecatState = "done"
    StateStuck      PolecatState = "stuck"
)
```

## Interface

```go
type PolecatManager struct {
    rig *Rig
    git *Git
}

func NewPolecatManager(rig *Rig, git *Git) *PolecatManager

// Lifecycle
func (pm *PolecatManager) Add(name string) (*Polecat, error)
func (pm *PolecatManager) Remove(name string) error
func (pm *PolecatManager) List() ([]*Polecat, error)
func (pm *PolecatManager) Get(name string) (*Polecat, error)

// State
func (pm *PolecatManager) SetState(name string, state PolecatState) error
func (pm *PolecatManager) AssignIssue(name, issue string) error
func (pm *PolecatManager) ClearIssue(name string) error

// Convenience
func (pm *PolecatManager) Wake(name string) error   // idle → active
func (pm *PolecatManager) Sleep(name string) error  // active → idle
```

## Add Flow

1. Create directory: `<rig>/polecats/<name>/`
2. Clone rig repo into it (or copy from rig root)
3. Create new branch: `polecat/<name>`
4. Initialize polecat state file
5. Create mail inbox

## Remove Flow

1. Verify session not running
2. Check for uncommitted changes (warn/error)
3. Remove directory
4. Clean up state

## State Persistence

Store in `<rig>/polecats/<name>/state.json`


bd ready --type: missing type filter for MQ integration

bd ready lacks --type flag that engineer.go expects.

## Code (internal/refinery/engineer.go)
readyMRs, err := e.beads.ReadyWithType("merge-request")

## Actual bd ready
No --type flag - only supports assignee, label, priority filters.

## Impact
Refinery can't find merge-requests in queue, so MQ doesn't process anything.

## Fix Options
1. Add --type flag to bd ready
2. Use bd list --type=merge-request --status=open instead
3. Both (ready filters for unblocked, list for all)

This is blocking the entire MQ pipeline.


Interactive prompts for destructive operations

Add interactive confirmations for destructive operations.

## Operations Needing Confirmation
- `gt swarm cancel` - Cancels active swarm
- `gt swarm land --force` - Force landing
- `gt polecat decommission` - Removes polecat
- `gt rig remove` - Removes rig
- `gt stop --all` - Stops all sessions
- `gt mail purge` - Permanently deletes mail

## Implementation Options

### Option 1: promptui library
```go
import "github.com/manifoldco/promptui"

prompt := promptui.Prompt{
    Label:     "Delete polecat Toast",
    IsConfirm: true,
}
result, err := prompt.Run()
```

### Option 2: Simple stdin
```go
func confirm(prompt string) bool {
    fmt.Printf("%s [y/N]: ", prompt)
    var response string
    fmt.Scanln(&response)
    return strings.ToLower(response) == "y"
}
```

## Bypass Flags
All confirmations skippable with --force or --yes:
```go
if !force && !confirm("Really cancel swarm?") {
    return nil
}
```

## Acceptance Criteria
- [ ] Destructive ops prompt by default
- [ ] --force or --yes bypasses
- [ ] Clear prompt text explaining action
- [ ] Non-interactive mode (piped input) auto-fails


CLI: spawn command

High-level command to spawn a polecat with work assignment.

## Command

```
gt spawn <rig>/<polecat> --issue <id>
gt spawn <rig> --issue <id>  # auto-select available polecat
gt spawn <rig>/<polecat> -m "Work on X"  # free-form task
```

## What It Does

1. Select or create polecat
2. Ensure polecat is in idle/active state
3. Assign the issue (update beads, set polecat state)
4. Start session (gt session start)
5. Inject initial context

## Options

- `--issue <id>`: Beads issue to assign
- `-m "message"`: Free-form work description
- `--create`: Create polecat if it does not exist
- `--no-start`: Assign work but do not start session

## Auto-Select Logic

If polecat not specified:
1. Look for idle polecats in rig
2. Prefer ones that worked on similar issues before
3. If none available, fail (or create if --create)

## Initial Context

Injects into session:
```
[SPAWN] You have been assigned: <issue-title>
Issue: <id>
Priority: <priority>

<description>

Work on this issue. Signal DONE when complete.
```

## Implementation

Orchestrates PolecatManager + SessionManager + Beads:
```go
func Spawn(rig, polecat, issue string, opts SpawnOptions) error
```


Merge: gt-5af.2

branch: polecat/Doof
target: main
source_issue: gt-5af.2
rig: gastown


Merge: gt-5af.6

branch: polecat/Slit
target: main
source_issue: gt-5af.6
rig: gastown


Witness daemon: heartbeat loop, spawn ephemeral agent

Background daemon for agent lifecycle and monitoring.

## Core Responsibilities

1. **Heartbeat monitoring**: Check agent health periodically
2. **Session lifecycle**: Restart agents after handoff (Witness Protection)
3. **Polecat monitoring**: Track worker progress, nudging
4. **Escalation**: Report failures to Mayor

## Session Lifecycle (Witness Protection)

The daemon enables autonomous long-running operation by cycling agent sessions:

```go
type SessionLifecycle struct {
    AgentType string  // "witness", "refinery"
    StatePath string  // path to state.json
}

func (d *Daemon) monitorSessionLifecycle(agent SessionLifecycle) {
    // 1. Detect session exit
    // 2. Check state.json for requesting_cycle: true
    // 3. If cycle requested: start new session, clear flag
    // 4. If unexpected exit: escalate to Mayor
}
```

See architecture.md Key Decision #12: Agent Session Lifecycle.

## Interface

```go
type Daemon struct {
    rig      *Rig
    polecats *PolecatManager
    sessions *SessionManager
    config   DaemonConfig
}

type DaemonConfig struct {
    HeartbeatInterval time.Duration  // default: 30s
    NudgeThreshold    int            // nudges before escalation
    MaxWorkers        int            // from rig config
}

func NewDaemon(rig *Rig) *Daemon
func (d *Daemon) Start() error
func (d *Daemon) Stop() error

// Lifecycle
func (d *Daemon) CycleSession(agentType string) error
func (d *Daemon) SpawnWorker(issueID string) error
func (d *Daemon) ShutdownWorker(polecat string) error
```

## Heartbeat Loop

Every HeartbeatInterval:
1. Check Witness session (restart if cycle requested)
2. Check Refinery session (restart if cycle requested)
3. For each active polecat: assess progress, nudge if stuck
4. Query `bd ready` for new work, spawn up to max_workers


Batch Work System: Integration branch, merge queue, landing

## Overview

This epic tracks batch work coordination in GGT. Key insight: **work is a stream, not discrete swarms**.

There are no "swarm IDs" - the epic IS the grouping, the merge queue IS the coordination. "Swarming an epic" is colloquial for spawning multiple workers on its children.

## Architecture

- **Epics** group related work
- **Issues** are individual tasks
- **Dependencies** encode ordering (multi-wave emerges automatically)
- **Merge queue** coordinates completed work
- **Workers** process issues independently

See Key Decision #11 in docs/architecture.md: "Work is a Stream (No Swarm IDs)"

## What This Epic Covers

1. Integration branch management for batch merges
2. Refinery semantic merge processing
3. Witness landing protocol (cleanup)
4. Report generation (epic-based, not swarm-ID-based)
5. Git safety auditing
6. Work reconciliation

## What Was Removed

- Swarm IDs (sw-1, sw-2, etc.)
- Per-swarm directories (.gastown/swarms/<id>/)
- Swarm manifest/state/events files
- swarm-started/swarm-landed beads

These were redundant - beads already provides hierarchy, status, dependencies, and history.

## References

- Architecture: docs/architecture.md (Key Decision #11, Multi-Wave Work Processing)
- PGT: swarm/manager.py, swarm/landing.py (behavioral reference, but ignore swarm ID patterns)


Merge: gt-5af.1

branch: polecat/Ace
target: main
source_issue: gt-5af.1
rig: gastown


Simplify Go daemon to Deacon-watcher

Refactor internal/daemon to only: (1) check deacon/heartbeat.json every 60s, (2) poke gt-deacon if stale, (3) restart Deacon and mail for help if very stale. Remove all lifecycle processing and agent poking.


MR: gt-svi.1 (polecat/Furiosa)

branch: polecat/Furiosa
target: main
source_issue: gt-svi.1


Plugin: merge-oracle (merge queue analysis)

Example plugin that analyzes changesets before Refinery processes them. Builds overlap graph, classifies disjointness (parallel-safe vs needs-sequencing), uses LLM for semantic complexity, identifies high-risk patterns. Based on merge-orchestration proposal. See docs/architecture.md.


Interrupt vs Queue mail semantics

Add priority/delivery semantics to mail messages.

## Semantics

| Type | Delivery | Use Case |
|------|----------|----------|
| Interrupt | tmux send-keys | Lifecycle, URGENT, stuck detection |
| Queue | Create message only | Normal mail, status, heartbeat |

## Implementation

- `bd mail send --interrupt` uses tmux send-keys notification
- Default is queue (agent checks with `gt mail check`)
- Urgent flag on messages for interrupt delivery

## Agent Side

- `gt mail check --quiet` - non-blocking check for queued mail
- `gt mail wait` - block until mail arrives (for idle agents)
- Heartbeats become queued, agent checks at natural breakpoints


SwarmManager: create, start, update, query operations

SwarmManager operations for creating and managing swarms.

## Interface

```go
type SwarmManager struct {
    rig    *Rig
    beads  *BeadsWrapper  // shells out to bd CLI
}

func NewSwarmManager(rig *Rig) *SwarmManager

// Lifecycle
func (m *SwarmManager) Create(epicID string, workers []string) (*Swarm, error)
func (m *SwarmManager) Start(swarmID string) error
func (m *SwarmManager) UpdateState(swarmID string, state SwarmState) error
func (m *SwarmManager) Cancel(swarmID string, reason string) error

// Queries (delegate to beads)
func (m *SwarmManager) GetSwarm(id string) (*Swarm, error)
func (m *SwarmManager) GetReadyTasks(swarmID string) ([]SwarmTask, error)
func (m *SwarmManager) GetActiveTasks(swarmID string) ([]SwarmTask, error)
func (m *SwarmManager) IsComplete(swarmID string) (bool, error)
```

## Implementation Notes

- `GetReadyTasks` wraps `bd ready --parent <epicID>`
- `IsComplete` checks if all child issues are closed
- State transitions update the epic's description or a tag field
- No separate manifest files - beads IS the source of truth


Witness swarm landing protocol

Witness responsibilities for swarm landing cleanup.

## Trigger

Witness receives "swarm-landed" mail from Refinery containing:
- swarm_id
- merge_commit
- action: "cleanup"

## Landing Protocol

### Phase 1: Preflight
Verify all polecat sessions stopped:
- Check tmux for active sessions
- Kill any remaining sessions
- Wait for graceful shutdown

### Phase 2: Git Audit
For each polecat in swarm:
- Check for uncommitted changes
- Check for unpushed commits
- Check for stashes
- Classify as "beads-only" (safe) or "code at risk"
- If code at risk: escalate, abort landing

### Phase 3: Cleanup
For each polecat:
- Clear state entry (mark as idle)
- Delete inbox (or archive)
- Delete worker branch (local + remote)

### Phase 4: Final Report
- Update swarm state to "landed"
- File landing report bead
- Mail Mayor with summary

## Code at Risk Handling

If git audit finds code at risk:
1. Abort cleanup for that polecat
2. Mail Mayor with details
3. Human intervention required

## Reference

PGT: swarm/landing.py (6-phase protocol), swarm/git_audit.py


Workspace detection: Find() walking up directory tree

Find workspace root by walking up directory tree looking for Gas Town markers.

## Detection Logic

Walk up from current directory, looking for:
1. `config/town.json` - Primary marker (visible config dir per gt-iib)
2. `mayor/` directory at town level - Secondary marker

Stop at filesystem root if neither found.

## Interface

```go
// Find locates the town root from the given directory
func Find(startDir string) (string, error)

// FindOrError is like Find but returns a user-friendly error
func FindOrError(startDir string) (string, error)
```

## Return Values

- Success: Absolute path to town root
- Not found: Empty string + specific error
- Error: Empty string + wrapped error

## Edge Cases

- Symlinks: Follow them (use filepath.EvalSymlinks)
- Permissions: Return error if can't read directory
- Nested towns: Return nearest ancestor (shouldn't happen in practice
EOF
)


Harness & Priming: Document architecture and update all role contexts


CLI: polecat commands (add, remove, list, wake, sleep)

Polecat management CLI commands.

## Commands

### gt polecat list
List polecats in a rig.
```
gt polecat list <rig> [--json]
gt polecat list --all [--json]
```
Output:
- Name
- State (idle/active/working/done/stuck)
- Current issue (if any)
- Session status (running/stopped)

### gt polecat add
Add a new polecat to a rig.
```
gt polecat add <rig> <name>
```
- Creates polecat directory
- Clones rig repo
- Creates work branch
- Initializes state

### gt polecat remove
Remove a polecat from a rig.
```
gt polecat remove <rig>/<polecat> [--force]
```
- Fails if session running
- Warns if uncommitted changes
- --force bypasses checks

### gt polecat wake
Mark polecat as active (ready for work).
```
gt polecat wake <rig>/<polecat>
```
Transitions: idle → active

### gt polecat sleep
Mark polecat as idle (not available).
```
gt polecat sleep <rig>/<polecat>
```
Transitions: active → idle
Fails if session running (stop first).

## Address Format

`<rig>/<polecat>` for operations on specific polecat.
`<rig>` for list command.

## Implementation

```go
var polecatCmd = &cobra.Command{Use: "polecat"}
polecatCmd.AddCommand(listCmd, addCmd, removeCmd, wakeCmd, sleepCmd)
```


Bubbletea TUI dashboard

Interactive TUI using Charm Bubbletea. Root model, view routing, Lipgloss theme. Includes: dashboard, rig explorer, polecat detail with live tail, mail view, beads view, spawn wizard.


Step recovery: timeout and release

Implement recovery mechanism for stuck molecule steps.

## Problem
When a worker dies mid-step, the step stays in_progress forever.
Need timeout/release mechanism for nondeterministic idempotence.

## Solution
1. Track step start time (claimed_at timestamp)
2. Timeout: After 30 min in_progress, step returns to pending
3. Manual release: bd release <step-id>

## Implementation Options

### Option A: Beads-level timeout
- Add claimed_at field to issues
- bd ready excludes items in_progress < 30 min
- bd ready includes items in_progress > 30 min (auto-recovery)

### Option B: Daemon-level timeout
- Daemon watches in_progress items
- Moves back to pending after timeout

### Option C: Manual only (MVP)
- bd release <id> manually moves in_progress → pending
- Document recovery procedure
- Witness can automate for polecats

## Recommendation
Start with Option C (manual) for Christmas. Add Option A later.

## Acceptance
- [ ] bd release command works
- [ ] Stuck steps can be recovered
- [ ] Documented recovery procedure


Keepalive signal from bd/gt commands

Every bd and gt command should touch a keepalive file to signal 'agent is alive/working'.

## Implementation

Touch `<workspace>/.gastown/keepalive.json`:
```json
{"last_command": "bd show gt-99m", "timestamp": "2025-12-18T13:45:00Z"}
```

## Usage by Daemon

- Fresh (< 2 min) → agent is working, skip heartbeat
- Stale (2-5 min) → might be thinking, gentle poke
- Very stale (> 5 min) → likely idle, safe to interrupt

## Benefits

- Zero cost (just file I/O)
- Works during long tool calls
- Doesn't require agent cooperation
- Foundation for smarter backoff strategies


Molecule instantiation: create child beads from template

When instantiating a molecule on a work bead:

## Transaction Flow

1. Parse molecule's `## Step:` sections from description
2. Begin SQLite transaction
3. For each step, create child issue:
   - ID: `{parent-id}.{step-ref}` or generated
   - Title: step title (from header or first line)
   - Description: step prose instructions
   - Type: task
   - Priority: inherit from parent
4. Add `instantiated-from` edge from each step to molecule:
   ```sql
   INSERT INTO dependencies (issue_id, depends_on_id, type, metadata)
   VALUES (step_id, mol_id, 'instantiated-from', '{"step": "implement"}');
   ```
5. Wire inter-step dependencies from `Needs:` lines
6. Commit transaction (atomic - all or nothing)

## Parsing Conventions

```markdown
## Step: <ref>
<prose instructions>
Needs: <step>, <step>  # optional
Tier: haiku|sonnet|opus  # optional hint
```

## Parameterization

Steps can have `{{variable}}` placeholders:
```markdown
## Step: implement
Implement {{feature_name}} in {{target_file}}.
```

Context map provided at instantiation time.

## API

```go
func (s *Store) InstantiateMolecule(mol *Issue, parent *Issue, ctx map[string]string) ([]*Issue, error)
func ParseMoleculeSteps(description string) ([]MoleculeStep, error)
```

Implementation lives in `internal/beads/molecule.go`.


Merge: gt-99a

branch: polecat/Slit
target: main
source_issue: gt-99a
rig: gastown


Update config location: .gastown/ → config/

Move rig configuration from hidden .gastown/ to visible config/:
- config/rig.json: Rig configuration
- config/engineer.json: Engineer settings (test command, etc.)
- config/witness.json: Witness settings (heartbeat interval, etc.)

Hidden directories are poorly discovered by AI agents.


gt crew add: Create crew workspace

Implement 'gt crew add <name> [--rig <rig>]' command:
- Clone repo into <rig>/crew/<name>/
- Create feature branch (optional, or stay on main)
- Register for mail delivery
- Initialize CLAUDE.md with crew worker prompting
- Do NOT register with witness (user-managed)


Create mol-gastown-polecat derived molecule

Create the standard Gas Town polecat workflow molecule.

## Molecule Definition
\`\`\`markdown
## Molecule: gastown-polecat
Full workflow for Gas Town polecats including binary installation.

Includes: mol-engineer-in-box

## Step: install-binary
After merge is submitted, rebuild and install the local gt binary.
This ensures the latest code is available to all local agents.

Run from the rig directory:
\`\`\`
go build -o gt ./cmd/gt
go install ./cmd/gt
\`\`\`

Needs: submit
\`\`\`

## Why This Molecule
Every polecat that pushes to main should also rebuild the binary.
This ensures the installed gt is always current with main.

## Implementation
1. Add to builtin_molecules.go (after Includes support lands)
2. Update SeedBuiltinMolecules
3. Run gt molecule seed

## Acceptance
- [ ] mol-gastown-polecat exists
- [ ] Includes all engineer-in-box steps
- [ ] Adds install-binary step after submit
- [ ] Can be used with gt spawn --molecule


gt spawn: pasted work assignment needs manual Enter to start

## Problem

After `gt spawn` pastes the work assignment into Claude, the session waits for Enter.

## Current Behavior

1. `gt spawn gastown/Rictus --issue gt-xxx`
2. Session starts, work is pasted
3. Claude shows 'Pasted text #1 +53 lines' but doesn't start
4. Must manually send Enter or attach and press Enter

## Expected

The spawn should send Enter after pasting to kick off the work.

## Related

Same debounce issue as tmux notifications (gt-vnp9).


gt mq list: show queue with status/priority/age

Implement 'gt mq list' command to display the merge queue.

Output format:
ID          STATUS       PRIORITY  BRANCH                    WORKER  AGE
gt-mr-001   ready        P0        polecat/Nux/gt-xyz        Nux     5m
gt-mr-002   in_progress  P1        polecat/Toast/gt-abc      Toast   12m
gt-mr-003   blocked      P1        polecat/Capable/gt-def    Capable 8m
            (waiting on gt-mr-001)

Options:
- --ready: show only ready-to-merge (no blockers, not in progress)
- --status STATUS: filter by status
- --worker WORKER: filter by worker
- --epic EPIC: show MRs targeting integration/EPIC

Under the hood: bd list --type=merge-request with filters.

Reference: docs/merge-queue-design.md#gt-mq-list


Session management: start, stop, attach, capture

Polecat session lifecycle management.

## Interface

```go
type SessionManager struct {
    tmux *Tmux
    rig  *Rig
}

func NewSessionManager(tmux *Tmux, rig *Rig) *SessionManager

// Lifecycle
func (sm *SessionManager) Start(polecat string, opts StartOptions) error
func (sm *SessionManager) Stop(polecat string) error
func (sm *SessionManager) IsRunning(polecat string) (bool, error)
func (sm *SessionManager) List() ([]SessionInfo, error)

// Interaction
func (sm *SessionManager) Attach(polecat string) error
func (sm *SessionManager) Capture(polecat string, lines int) (string, error)
func (sm *SessionManager) Inject(polecat string, message string) error

type StartOptions struct {
    WorkDir   string   // defaults to polecat clone dir
    Issue     string   // optional: issue to work on
    Command   string   // optional: override claude command
}

type SessionInfo struct {
    Polecat   string
    SessionID string
    Running   bool
    StartedAt time.Time
}
```

## Session Naming

`gt-<rig>-<polecat>` (e.g., `gt-wyvern-Toast`)

## Start Flow

1. Verify polecat clone exists
2. Check no existing session
3. Create tmux session in polecat workdir
4. Send initial command: `claude` or custom
5. If issue provided, inject initial prompt

## Stop Flow

1. Capture final output (for logging)
2. Send exit/quit command
3. Wait briefly for graceful shutdown
4. Kill session if still running

## Capture

Uses tmux capture-pane to get recent output. Returns last N lines.

## Inject

Sends text to session via tmux send-keys. Used for:
- Mail notifications
- Witness nudges
- User messages


town handoff command (optional)

CLI commands for session handoff workflow (optional convenience).

## Commands

### gt handoff
Generate handoff interactively.
```
gt handoff [--send]
```
- Collects current state (status, inbox, beads)
- Prompts for additional notes
- --send: Mail to self and exit

### gt resume
Check for and display pending handoff.
```
gt resume
```
- Checks inbox for handoff message
- Displays formatted handoff if found
- Suggests next actions

## Implementation

These are convenience wrappers. The same workflow can be done manually:
```bash
# Manual handoff
town status > /tmp/handoff
town inbox >> /tmp/handoff
bd ready >> /tmp/handoff
# Edit and send
town mail send mayor/ -s "Session Handoff" -f /tmp/handoff
```

## Priority

P2 - Optional. Manual workflow works fine. Nice to have for UX.

## Notes

Part of session cycling workflow designed in gt-u82.


LocalConnection: Local file/exec/tmux operations

LocalConnection implementation for local machine operations.

## Implementation

```go
type LocalConnection struct {
    tmux *Tmux
}

func NewLocalConnection() *LocalConnection

func (c *LocalConnection) Name() string { return "local" }
func (c *LocalConnection) IsLocal() bool { return true }
```

## File Operations

Direct passthrough to os package:
```go
func (c *LocalConnection) ReadFile(path string) ([]byte, error) {
    return os.ReadFile(path)
}
// etc.
```

## Command Execution

Uses exec.Command:
```go
func (c *LocalConnection) Exec(cmd string, args ...string) ([]byte, error) {
    return exec.Command(cmd, args...).Output()
}
```

## Tmux

Delegates to Tmux wrapper:
```go
func (c *LocalConnection) TmuxNewSession(name, dir string) error {
    return c.tmux.NewSession(name, dir)
}
```

## Notes

Straightforward implementation - this is the "baseline" connection that SSHConnection will mirror remotely.


Test message

Testing GGT mail via beads


Create Refinery role template

Add Refinery template to internal/templates/roles/:
- refinery.md.tmpl with full role context
- Variables: rig name, working directory, handoff bead ID
- Update SeedRoleTemplates to include it
- gt prime uses this template for Refinery context


Merge: gt-h5n.5

branch: polecat/Scabrous
target: main
source_issue: gt-h5n.5
rig: gastown


Document Overseer role (human operator)

Document the Overseer role in Gas Town architecture.

## The Overseer

The **Overseer** is the human operator of Gas Town. Not an agent - a person.

## Responsibilities

| Area | Overseer Does | Mayor/Agents Do |
|------|---------------|-----------------|
| Strategy | Define project goals | Execute toward goals |
| Priorities | Set priority order | Work in priority order |
| Escalations | Final decision on stuck work | Escalate to Overseer |
| Resources | Provision machines | Use allocated resources |
| Quality | Review & approve swarm output | Produce output |
| Operations | Run gt commands, monitor dashboards | Do the work |

## Key Interactions

### Overseer → Mayor
- Start/stop Mayor sessions
- Direct Mayor via conversation
- Review Mayor recommendations
- Approve cross-rig decisions

### Mayor → Overseer (Escalations)
- Stuck workers after retries
- Resource decisions (add machines, polecats)
- Ambiguous requirements
- Architecture decisions

## Operating Cadence

Typical Overseer workflow:
1. Morning: Check status, review overnight work
2. During day: Monitor, respond to escalations, adjust priorities
3. End of day: Review progress, plan next batch

## Commands for Overseers

```bash
gt status              # Quick health check
gt doctor              # Detailed diagnostics
gt doctor --fix        # Auto-repair issues
gt inbox               # Messages from agents
gt stop --all          # Emergency halt
```

## Documentation Updates

Add to docs/architecture.md:
- Overseer section under Agent Roles
- Clarify Mayor reports to Overseer
- Add Overseer to workflow diagrams


Workspace doctor checks: Config, state, mail, Mayor, rigs

Workspace-level doctor checks.

## Checks

### ConfigExists
- Verify config/ directory exists
- Verify config/town.json exists
- Fix: Cannot auto-fix (need gt install)

### ConfigValid
- Parse town.json
- Verify required fields (type, version, name)
- Verify type == "town"
- Fix: Cannot auto-fix

### RigsRegistryValid
- Parse config/rigs.json
- Verify each registered rig directory exists
- Warn on missing rigs
- Fix: Remove missing rigs from registry

### MayorExists
- Verify mayor/ directory exists
- Verify mayor/CLAUDE.md exists
- Fix: Create from template

### MayorMailboxExists
- Verify mayor/mail/ directory exists
- Verify mayor/mail/inbox.jsonl exists (can be empty)
- Fix: Create directory and empty file

### MayorStateValid
- Parse mayor/state.json if exists
- Verify valid JSON
- Fix: Reset to default state

## Implementation

```go
var WorkspaceChecks = []Check{
    &ConfigExistsCheck{},
    &ConfigValidCheck{},
    &RigsRegistryValidCheck{},
    &MayorExistsCheck{},
    &MayorMailboxExistsCheck{},
    &MayorStateValidCheck{},
}
```


Design: Additional design issues (placeholder)

Placeholder for additional design issues the user wants to raise and work through. Convert to specific subtasks as issues are identified.


Merge: gt-3x1.3

branch: polecat/Doof
target: main
source_issue: gt-3x1.3
rig: gastown


CloudRun persistent connections: HTTP/2 keepalive

## Overview

Implement persistent HTTP/2 connections to keep Cloud Run containers warm.

## Problem

Cloud Run has cold start latency when scaling from 0. Persistent connections keep containers warm.

## Implementation

```go
type PersistentConnectionManager struct {
    serviceURL string
    conn       net.Conn
    client     *http2.ClientConn
    mu         sync.Mutex
    lastUsed   time.Time
    keepAlive  time.Duration
}

func (m *PersistentConnectionManager) GetConnection() (*http2.ClientConn, error) {
    m.mu.Lock()
    defer m.mu.Unlock()

    // Reuse existing connection if healthy
    if m.client != nil && m.client.CanTakeNewRequest() {
        m.lastUsed = time.Now()
        return m.client, nil
    }

    // Create new connection
    return m.dial()
}

func (m *PersistentConnectionManager) keepAliveLoop() {
    ticker := time.NewTicker(m.keepAlive / 2)
    for range ticker.C {
        m.mu.Lock()
        if time.Since(m.lastUsed) > m.keepAlive {
            // Connection idle too long, close it
            m.close()
        } else {
            // Send ping to keep alive
            m.ping()
        }
        m.mu.Unlock()
    }
}
```

## Integration with CloudRunOutpost

```go
type CloudRunOutpost struct {
    // ...existing fields...
    connMgr *PersistentConnectionManager
}

func (o *CloudRunOutpost) Spawn(...) {
    conn, err := o.connMgr.GetConnection()
    // Use connection for work dispatch
}
```

## Config

```yaml
outposts:
  - name: cloudrun-burst
    type: cloudrun
    # ...
    keep_alive: 5m  # Keep connection warm for 5 minutes
```

## Files

- `internal/cloudrun/connection.go`

## Dependencies

Depends on: gt-9a2.8 (basic CloudRunOutpost)


beads: Stop searching upward when .beads found

## Problem

When running bd commands in a nested directory structure with multiple .beads directories, bd shows a confusing warning:

```
╔══════════════════════════════════════════════════════════════════════════╗
║ WARNING: 2 beads databases detected in directory hierarchy              ║
╠══════════════════════════════════════════════════════════════════════════╣
║ Multiple databases can cause confusion and database pollution.          ║
║                                                                          ║
║   /Users/stevey/gt/gastown/.beads (261 issues)                           ║
║   /Users/stevey/gt/.beads (21 issues)                                    ║
║                                                                          ║
║ WARNING: Not using the closest database! Check your BEADS_DB setting.   ║
║                                                                          ║
║ RECOMMENDED: Consolidate or remove unused databases to avoid confusion. ║
╚══════════════════════════════════════════════════════════════════════════╝
```

## Why This Is Wrong

In Gas Town, nested .beads directories are **intentional and necessary**:
- Town level: /Users/stevey/gt/.beads (mail, town-level issues)
- Rig level: /Users/stevey/gt/gastown/.beads (gastown project issues)
- Worker level: polecats have their own beads in worktrees

These are **unrelated** beads instances for different scopes. They should never be consolidated.

## Expected Behavior

When bd finds a .beads directory, it should:
1. Use that directory (closest ancestor wins)
2. **Stop searching upward** - do not look for parent .beads directories
3. **No warning** about multiple databases

## Current Behavior

bd searches all the way up to root, finds all .beads directories, and warns about "multiple databases" even though they are separate, intentional instances.

## Fix

In the database discovery code, stop the upward search as soon as a .beads directory is found. The first .beads found is the one to use, and parent directories are out of scope.

## Note

This is a beads issue, filed here for tracking. Should be implemented in the beads codebase.


Integration branch management for swarms

Manage integration branches for swarm merging strategy.

## Branch Naming

- Integration branch: `integration/<swarm-id>` (e.g., integration/sw-1)
- Worker branches: `<swarm-id>/<polecat>` (e.g., sw-1/Toast)

## Operations

```go
// Create integration branch at swarm start
func (m *SwarmManager) CreateIntegrationBranch(swarmID string) error
// - Creates from BaseCommit
// - Pushes to origin

// Merge worker branch to integration
func (r *Refinery) MergeToIntegration(swarmID, workerBranch string) error
// - Fetches worker branch
// - Merges to integration/<swarm-id>
// - Handles conflicts (semantic merge)

// Land integration to main
func (r *Refinery) LandToMain(swarmID string) error
// - Merges integration/<swarm-id> to main
// - Pushes to origin
// - Triggers cleanup

// Cleanup branches after landing
func (m *SwarmManager) CleanupBranches(swarmID string) error
// - Deletes integration/<swarm-id> (local + remote)
// - Deletes all <swarm-id>/<polecat> branches
```

## All Workers Same Base

When swarm starts:
1. Record current main HEAD as BaseCommit
2. All polecats branch from BaseCommit
3. Integration branch also starts at BaseCommit

This ensures clean merges within the swarm.

## Reference

PGT: ephemeral.py (create_integration_branch, merge_integration_to_main)


MR ID generation: prefix-mr-hash convention

Generate merge-request IDs following the convention: <prefix>-mr-<hash>

Example: gt-mr-abc123 for a gastown merge request.

This distinguishes MRs from regular issues while keeping them in the same namespace.
The hash should be derived from branch name + timestamp for uniqueness.

Implement: GenerateMRID(prefix, branch string) string

Reference: docs/merge-queue-design.md#id-convention


Merge: gt-a95

branch: polecat/Ace
target: main
source_issue: gt-a95
rig: gastown


Test from Mayor

This is a test message via GGT mail


gt rig info: Show detailed rig information

Add 'gt rig info <rig>' command to show detailed rig status.

Should show:
- Rig path and git URL
- Active polecats with status
- Refinery status
- Witness status
- Recent activity
- Beads summary (open issues count)


gt mq list: doesn't show submitted MRs

After submitting MRs with gt mq submit, gt mq list gastown shows empty queue.

## Reproduction
1. gt mq submit --issue gt-h5n.5 --branch polecat/Scabrous
2. gt mq list gastown → (empty)
3. bd list --type=merge-request → shows the MR

## Expected
gt mq list should show submitted MRs

## MR example
gt-ts4u has rig: gastown in description, type=merge-request, status=open


Test Task 2: Add comment to version.go


detectSender() doesn't recognize crew workers

## Problem

`detectSender()` in mail.go only detects polecats, not crew workers.

## Current Code (line 445)

```go
// If in a rig's polecats directory, extract address
if strings.Contains(cwd, "/polecats/") {
    // extract rig/polecat
}

// Default to mayor
return "mayor/"
```

## Symptom

Emma (crew worker at `/Users/stevey/gt/beads/crew/emma`) runs:
- `gt mail inbox` → checks `mayor/` inbox (wrong!)
- Should check `beads/emma` or `beads/crew/emma`

## Fix

Add crew detection:
```go
// If in a rig's crew directory, extract address
if strings.Contains(cwd, "/crew/") {
    parts := strings.Split(cwd, "/crew/")
    if len(parts) >= 2 {
        rigPath := parts[0]
        crewName := strings.Split(parts[1], "/")[0]
        rigName := filepath.Base(rigPath)
        return fmt.Sprintf("%s/%s", rigName, crewName)
    }
}
```

## Also Check

- `gt prime` correctly detects role, so there may be another detection function that works
- Should unify detection logic


Merge: gt-70b3

type: merge-request
branch: polecat/Rictus
target: main
source_issue: gt-70b3
rig: gastown


Plugin: Plan-to-Epic converter

## Purpose

Help users create beads epics from various planning inputs.

## Inputs
- Markdown task lists
- GitHub issues
- Linear/Jira exports
- Free-form descriptions
- Existing beads epics

## Output
- Beads epic with properly structured children
- Dependencies set for wave ordering
- Priorities assigned
- Ready for `gt spawn --epic <id>`

## Implementation Options

### Option A: CLI Tool
```bash
gt plan import --from github --repo owner/repo --label batch-candidate
gt plan import --from markdown tasks.md
gt plan structure <epic-id>  # analyze and add dependencies
```

### Option B: Plugin Agent
A plugin at `<rig>/plugins/plan-oracle/` that:
- Receives planning requests via mail
- Analyzes scope and requirements
- Creates structured beads epic
- Sets dependencies based on analysis

### Option C: Interactive Mode
```bash
gt plan create
# Walks through questions, creates epic interactively
```

## Axiom

As stated: 'The Planning phase should end in the creation of a workable Beads plan.'

This plugin bridges the gap between human planning and machine-executable work.

## Priority

P2 - Nice to have for MVP. Manual epic creation works for now.

## Note

No "swarm IDs" - output is just a beads epic with children. Workers process it independently.


tmux notifications: display-message too subtle, use send-keys instead

## Problem

`tmux display-message` notifications are not visible enough - they appear briefly in the status bar and are easy to miss.

## Current Behavior

router.go uses:
```go
r.tmux.DisplayMessageDefault(sessionID, notification)
```

## What Works

Sending echo commands directly to the terminal:
```bash
tmux send-keys -t <session> "echo '📬 NEW MAIL from mayor'" Enter
```

## Proposed Fix

Change notification method to send visible output to the terminal, perhaps with a box/banner:
```
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📬 NEW MAIL from mayor
Subject: <subject>
Run: bd mail inbox
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
```

## Considerations

- This interrupts the terminal output (acceptable for important mail)
- Could check if Claude is mid-response and queue notification
- Or use tmux popup if available

Additional issues:
1. Enter key not sent properly when chained with send-keys
2. Need to debounce and send Enter separately
3. Correct pattern: send text, sleep briefly, then send Enter


Implement handoffs using pinned beads

Replace the current mail-based handoff system with pinned beads.

## Current Problem

Handoff messages get closed before the successor can read them because:
1. `gt mail read` auto-acks (closes) messages
2. `bd mail inbox` only shows open messages
3. Successor sees empty inbox

## Solution

Use pinned beads for handoffs:
- One pinned bead per role: `mayor-handoff`, `<rig>-refinery-handoff`, etc.
- Predecessor updates the content before cycling
- Successor reads on startup via `gt prime`
- Never closes - always available

## Implementation

### 1. Create handoff beads on first cycle
- `bd create --title='Mayor Handoff' --type=task --status=pinned --assignee=mayor`
- Store ID in role config or use well-known naming convention

### 2. Update gt handoff command
- Instead of `bd mail send`, update the pinned handoff bead
- `bd update <handoff-id> --description='...handoff content...'`

### 3. Update gt prime
- Read the role's handoff bead
- Display content to successor

### 4. Compression/reset
- `gt rig reset` clears handoff content
- Or manual: `bd update <handoff-id> --description=''`

## Dependencies

Requires beads-6v2 (StatusPinned) to be implemented first.


Mayor handoff mail template

Add MAYOR_HANDOFF mail template to templates.py.

## Template Function

def mayor_handoff(
    active_swarms: List[SwarmStatus],
    rig_status: Dict[str, RigStatus],
    pending_escalations: List[Escalation],
    in_flight_decisions: List[Decision],
    recent_actions: List[str],
    delegated_work: List[DelegatedItem],
    user_requests: List[str],
    next_steps: List[str],
    warnings: Optional[str] = None,
    session_duration: Optional[str] = None,
) -> Message:
    metadata = {
        'template': 'MAYOR_HANDOFF',
        'timestamp': datetime.utcnow().isoformat(),
        'session_duration': session_duration,
        'active_swarm_count': len(active_swarms),
        'pending_escalation_count': len(pending_escalations),
    }
    # ... format sections ...
    return Message.create(
        sender='mayor/',
        recipient='mayor/',
        subject='Session Handoff',
        body=body,
        priority='high',
    )

## Metadata Fields

- template: MAYOR_HANDOFF
- timestamp: ISO format
- session_duration: Human readable
- active_swarm_count: Number of active swarms
- pending_escalation_count: Number of escalations

## Mail Priority

Use priority='high' to ensure handoff is seen on startup.


Swarm learning: Beads database locality gap

## PGT Bug (GGT Design Already Correct)

Mayor created issues in `~/ai/mayor/rigs/beads/.beads/` but polecats use `~/ai/beads/.beads/`. Different databases = polecats can't see Mayor's beads.

**GGT Fix**: architecture.md already specifies:
- All agents use BEADS_DIR pointing to rig-level `.beads/`
- Lines 116-143: Beads Configuration for Multi-Agent
- Lines 573-586: Rig-Level Beads via BEADS_DIR

This is a PGT implementation gap, not a design issue. GGT spawn must set BEADS_DIR correctly.


Refinery-Witness communication protocol

Define mail protocol between Refinery and Witness:

FROM Witness → Refinery:
- 'Polecat ready': polecat X completed work, ready for merge
- 'Rework complete': polecat Y finished requested rework

FROM Refinery → Witness:
- 'Merge success': polecat X merged, can be cleaned up
- 'Merge failed': polecat X needs rework on <reason>
- 'Rework request': please have a polecat rebase X on current main

Implement as structured mail with parseable format.


/restart: Personal slash command for in-place agent restart

Create ~/.claude/commands/restart.md that restarts current Gas Town agent in place.

## Detection
- Read tmux session name: gt-mayor, gt-witness-*, gt-refinery-*, gt-polecat-*
- Fallback: check GT_ROLE env var

## Behavior by role
- mayor: gt mayor restart (sends Ctrl-C, loop respawns)
- witness: gt witness restart
- refinery: gt refinery restart
- polecat: gt polecat restart (or witness-mediated)

## Command format
Uses backticks for inline bash to detect context, then instructs Claude to run appropriate restart.


Design: Mayor session cycling and handoff

Design for Mayor session cycling and structured handoff.

## Overview

Mayor coordinates across all rigs and runs for extended periods. Needs session cycling pattern with structured handoff notes.

## Key Elements

1. Session cycling recognition (when to cycle)
2. Handoff note format (structured state capture)
3. Handoff delivery (mail to self)
4. Fresh session startup (reading and resuming)

## Subtasks (implementation)

- gt-g2d: Mayor session cycling prompting
- gt-sye: Mayor startup protocol prompting
- gt-vci: Mayor handoff mail template
- gt-1le: town handoff command (optional, P2)

**Design complete.** Each subtask has full specification in its description.


gt polecat remove --all: bulk polecat teardown

Currently gt polecat remove only accepts one polecat at a time. Need bulk operations:

## Requested
- `gt polecat remove gastown --all` - remove all polecats from a rig
- `gt polecat remove gastown/A gastown/B ...` - remove multiple by name

## Context
After a swarm completes, tearing down 20 polecats one at a time is tedious.
Ephemeral workers should be easy to create and destroy in bulk.

## Related
- gt-c92: CLI: all command for batch polecat operations


Worker prompting: Beads write access

Add beads write access section to polecat AGENTS.md.template.

## Beads Access Section for Prompting

```markdown
## Beads Access

You have **full beads access** - create, update, and close issues.

### Quick Reference

```bash
# View work
bd ready                    # Issues ready (no blockers)
bd list                     # All open issues
bd show <id>                # Issue details

# Create issues
bd create --title="Fix bug" --type=bug --priority=2
bd create --title="Add feature" --type=feature

# Update issues
bd update <id> --status=in_progress    # Claim work
bd close <id>                          # Mark complete

# Sync (required before merge!)
bd sync                     # Commit beads changes to git
```

### When to Create Issues

Create beads issues when you discover work that:
- Is outside your current task scope
- Would benefit from tracking
- Should be done by someone else

**Good examples**:
```bash
bd create --title="Race condition in auth" --type=bug --priority=1
bd create --title="Document API rate limits" --type=task --priority=3
```

**Don't create for**:
- Tiny fixes you can do in 2 minutes
- Vague "improvements" with no scope
- Work already tracked elsewhere

### Beads Sync Protocol

**CRITICAL**: Always sync beads before merging!

```bash
bd sync                    # Commits beads changes
git add .beads/
git commit -m "beads: sync"
```

If you forget to sync, beads changes are lost when session ends.
```

## Implementation

Add to AGENTS.md.template polecat section.


Polecat CLAUDE.md: configure auto-approve for bd and gt commands

Polecats get stuck waiting for bash command approval when running
bd and gt commands. Need to configure Claude Code to auto-approve these.

Options:
1. Add allowedTools to polecat CLAUDE.md
2. Configure .claude/settings.json in polecat directory
3. Use --dangerously-skip-permissions flag (not recommended)

Should auto-approve:
- bd (beads commands)
- gt (gastown commands)
- go build/test
- git status/add/commit/push

Should still require approval:
- rm -rf
- Arbitrary commands outside project

Related to polecat prompting (gt-e1y, gt-sd6).


Doctor check: Zombie session cleanup

Detect and clean up zombie tmux sessions via gt doctor.

## Problem

Zombie sessions occur when:
- Agent crashes without cleanup
- gt kill fails mid-operation
- System restart leaves orphan sessions
- Session naming collision

## Checks

### ZombieSessionCheck
- List all tmux sessions matching gt-* pattern
- Cross-reference with known polecats
- Flag sessions with no corresponding polecat state
- Flag sessions for removed polecats
- Check session age vs polecat creation time

### Detection Criteria
- Session exists but polecat directory doesn't
- Session name doesn't match any registered polecat
- Polecat state=idle but session running
- Multiple sessions for same polecat

## Output

```
[WARN] Zombie tmux sessions detected:
  - gt-wyvern-OldPolecat (polecat removed)
  - gt-beads-Unknown (no matching polecat)
  - gt-wyvern-Toast (duplicate session)

  Run 'gt doctor --fix' to clean up
```

## Auto-Fix (--fix flag)

- Kill orphan tmux sessions
- Update polecat state to match reality
- Log all cleanup actions

## Safety

- Never kill sessions where polecat state=working
- Prompt before killing if --fix used without --force
- Create audit log of killed sessions


Merge: gt-g44u.3

branch: polecat/Ace
target: main
source_issue: gt-g44u.3
rig: gastown


Town Doctor molecule for harness health checks

Create a Town Doctor molecule that any Gas Town agent can run to diagnose and repair harness issues.

## Concept

Instead of just `gt doctor` as a CLI command with hardcoded checks, create a **molecule** (checklist workflow) that:
- Any agent (Mayor, Witness, Polecat) can instantiate
- Walks the agent through diagnostic steps
- Agent uses judgment to fix issues found
- Works as a structured troubleshooting guide

## Why a Molecule?

1. **Agent-driven**: The agent running it becomes "the doctor" temporarily
2. **Extensible**: Add new checks by updating the molecule, not code
3. **Contextual**: Agent can reason about issues, not just run scripts
4. **Self-healing**: Agent can fix problems it finds, not just report them

## Proposed Checks (molecule steps)

1. Verify harness structure (mayor/, .beads/, CLAUDE.md exist)
2. Validate config files (town.json, rigs.json parse correctly)
3. Check beads health (bd doctor, redirect validity)
4. Verify git state (clean working tree, proper remotes)
5. Check rig integrity (each registered rig exists, has config.json)
6. Validate agent clones (mayor/rig/, refinery/rig/ exist and are valid)
7. Check for orphaned worktrees/branches
8. Verify daemon state (if running)

## Integration

- `gt doctor` could instantiate the molecule for the current agent
- Or agent can run `bd ready` and pick up doctor tasks when prioritized
- Results logged to beads for audit trail

## Related

- gt-cr9: Harness Design & Documentation (completed)
- Molecules design in architecture.md


Machine registry: Store and manage machine configs

Registry for managing remote machines in federation.

## Data Model

```go
type Machine struct {
    Name     string `json:"name"`
    Type     string `json:"type"`      // "local", "ssh", "gcp"
    Host     string `json:"host"`      // for ssh: user@host
    KeyPath  string `json:"key_path"`  // SSH key path
    TownPath string `json:"town_path"` // Path to town on remote
}
```

## Interface

```go
type MachineRegistry struct {
    path     string  // config/federation.json
    machines map[string]*Machine
}

func NewMachineRegistry(configPath string) *MachineRegistry
func (r *MachineRegistry) Get(name string) (*Machine, error)
func (r *MachineRegistry) Add(m *Machine) error
func (r *MachineRegistry) Remove(name string) error
func (r *MachineRegistry) List() []*Machine
func (r *MachineRegistry) Connection(name string) (Connection, error)
```

## Storage

federation.json in config/:
```json
{
  "version": 1,
  "machines": {
    "local": {"type": "local"},
    "gcp-vm-1": {
      "type": "ssh",
      "host": "user@10.0.0.1",
      "key_path": "~/.ssh/gcp_key",
      "town_path": "/home/user/ai"
    }
  }
}
```

## Connection Factory

```go
func (r *MachineRegistry) Connection(name string) (Connection, error) {
    m := r.machines[name]
    switch m.Type {
    case "local":
        return NewLocalConnection(), nil
    case "ssh":
        return NewSSHConnection(m.Host, m.KeyPath), nil
    }
}
```


GGT Command Parity: Complete gt command coverage

Complete gt command set to match/exceed PGT town commands.

Covers: uninstall, rig info, refinery attach, witness, session mgmt, mail UX, daemon.


Plugin system: subprocess JSON protocol

Language-agnostic plugin system via subprocess JSON protocol.

## Concept

Allow extending Gas Town with external scripts/programs. Plugins communicate via stdin/stdout JSON.

## Protocol

Request (gt → plugin):
```json
{"method": "check", "params": {"rig": "wyvern", "polecat": "Toast"}}
```

Response (plugin → gt):
```json
{"result": {...}, "error": null}
```

Error response:
```json
{"result": null, "error": {"code": 1, "message": "..."}}
```

## Interface

```go
type Plugin struct {
    Name    string
    Path    string  // executable path
    Methods []string
}

type PluginManager struct {
    plugins map[string]*Plugin
}

func NewPluginManager() *PluginManager
func (pm *PluginManager) Register(plugin *Plugin) error
func (pm *PluginManager) Call(plugin, method string, params any) (any, error)
func (pm *PluginManager) Discover(dir string) error  // auto-discover plugins
```

## Plugin Discovery

Look in:
1. `<town>/plugins/`
2. `~/.config/gastown/plugins/`
3. System path with `gt-plugin-*` prefix

## Built-in Hooks

Plugins can register for events:
- `polecat.started` - Polecat session started
- `polecat.done` - Polecat signals done
- `merge.requested` - MR submitted
- `merge.completed` - MR merged

## Use Cases

- Custom health checks
- Integration with external systems (Slack, etc.)
- Custom merge policies
- Metrics collection

## Future

Consider MCP integration for richer plugin capabilities.


Outpost assignment policy: Smart work routing

## Overview

Policy engine for deciding which outpost gets which work.

## Policy Configuration

```yaml
policy:
  # Default order of preference
  default_preference: [local, gce-burst, cloudrun-burst]

  # Rules applied in order
  rules:
    # Background work → Cloud Run (cheap)
    - condition: "priority >= P3"
      prefer: cloudrun-burst

    # Long tasks → VM (persistent)
    - condition: "estimated_duration > 30m"
      prefer: gce-burst

    # Specific epic → specific outpost
    - condition: "epic == gt-abc"
      prefer: local
```

## Implementation

```go
type AssignmentPolicy struct {
    DefaultPreference []string
    Rules             []PolicyRule
}

type PolicyRule struct {
    Condition string   // Simple expression
    Prefer    string   // Outpost name
    Require   string   // Must use this outpost
}

func (p *AssignmentPolicy) SelectOutpost(
    issue Issue,
    outposts map[string]Outpost,
) Outpost {
    // Check rules in order
    for _, rule := range p.Rules {
        if rule.Matches(issue) {
            if op, ok := outposts[rule.Prefer]; ok {
                if op.ActiveWorkers() < op.MaxWorkers() {
                    return op
                }
            }
        }
    }

    // Fall back to default preference
    for _, name := range p.DefaultPreference {
        if op, ok := outposts[name]; ok {
            if op.ActiveWorkers() < op.MaxWorkers() {
                return op
            }
        }
    }

    return nil  // All outposts at capacity
}
```

## Condition Language

Simple expressions, not a full DSL:

```
priority >= P3
priority == P0
estimated_duration > 30m
epic == gt-abc
type == bug
label contains "urgent"
```

## Files

- `internal/outpost/policy.go`
- `internal/outpost/condition.go`

Depends on: gt-9a2.3 (config)


CLI: rig commands (list, show, add)

Rig management CLI commands.

## Commands

### gt rig list
List all registered rigs.
```
gt rig list [--json]
```
Output:
- Rig name
- Git URL
- Polecat count
- Witness/Refinery status

### gt rig show
Show details for a specific rig.
```
gt rig show <name> [--json]
```
Output:
- Full rig info
- Polecats with status
- Recent activity
- Beads summary (open issues)

### gt rig add
Add a new rig to the town.
```
gt rig add <name> <git-url>
gt rig add <name> --local <path>
```
Steps:
- Clone repo to town root (or link local)
- Register in rigs.json
- Create agent directories
- Configure git exclude

### gt rig remove
Remove a rig from the town.
```
gt rig remove <name> [--force]
```
- Warns if active polecats
- --force required if uncommitted changes

## Implementation

```go
var rigCmd = &cobra.Command{Use: "rig"}
rigCmd.AddCommand(rigListCmd, rigShowCmd, rigAddCmd, rigRemoveCmd)
```


Fix gt prime to give crew workers crew context

gt prime currently gives Mayor context to all agents. Crew workers should get crew-specific context. Also extract shared theory of operation from mayor priming into shared context for all roles.


Retry logic: exponential backoff for transient failures

Implement retry logic for transient failures.

Retryable failures:
- Push failed (network, auth transient)
- Test flaky (config: retry_flaky_tests)
- Fetch failed (network)

Retry strategy:
- Max retries: 3 (configurable)
- Backoff: 1s, 2s, 4s (exponential)
- On final failure: treat as permanent, assign back

Non-retryable failures:
- Merge conflict
- Test consistently fails
- Build error

Track retry count in MR metadata for debugging.

Reference: docs/merge-queue-design.md#failure-recovery


Outpost error handling: Retry logic and resilience

## Overview

Error handling and retry logic for outpost operations.

## Error Types

```go
var (
    ErrOutpostUnreachable = errors.New("outpost unreachable")
    ErrWorkerSpawnFailed  = errors.New("worker spawn failed")
    ErrWorkerTimeout      = errors.New("worker timed out")
    ErrCostCapExceeded    = errors.New("cost cap exceeded")
    ErrAllOutpostsBusy    = errors.New("all outposts at capacity")
)
```

## Retry Policy

```go
type RetryPolicy struct {
    MaxAttempts     int
    InitialBackoff  time.Duration
    MaxBackoff      time.Duration
    BackoffFactor   float64
    RetryableErrors []error
}

func DefaultRetryPolicy() *RetryPolicy {
    return &RetryPolicy{
        MaxAttempts:    3,
        InitialBackoff: 1 * time.Second,
        MaxBackoff:     30 * time.Second,
        BackoffFactor:  2.0,
        RetryableErrors: []error{
            ErrOutpostUnreachable,
            ErrWorkerSpawnFailed,
        },
    }
}
```

## Retry Implementation

```go
func (m *OutpostManager) SpawnWithRetry(issue string, cfg WorkerConfig) (Worker, error) {
    var lastErr error
    backoff := m.retryPolicy.InitialBackoff

    for attempt := 0; attempt < m.retryPolicy.MaxAttempts; attempt++ {
        outpost := m.policy.SelectOutpost(issue, m.outposts)
        if outpost == nil {
            return nil, ErrAllOutpostsBusy
        }

        worker, err := outpost.Spawn(issue, cfg)
        if err == nil {
            return worker, nil
        }

        if !m.isRetryable(err) {
            return nil, err
        }

        lastErr = err
        time.Sleep(backoff)
        backoff = min(backoff * m.retryPolicy.BackoffFactor, m.retryPolicy.MaxBackoff)
    }

    return nil, fmt.Errorf("spawn failed after %d attempts: %w",
        m.retryPolicy.MaxAttempts, lastErr)
}
```

## Outpost Health Tracking

```go
type OutpostHealth struct {
    LastPing      time.Time
    LastError     error
    FailureCount  int
    CircuitBreaker bool  // If true, skip this outpost
}

func (m *OutpostManager) updateHealth(name string, err error) {
    // Track failures, open circuit breaker after N failures
    // Auto-reset after successful ping
}
```

## Config

```yaml
policy:
  retry:
    max_attempts: 3
    initial_backoff: 1s
    max_backoff: 30s

  circuit_breaker:
    failure_threshold: 5
    reset_timeout: 1m
```

## Files

- `internal/outpost/retry.go`
- `internal/outpost/health.go`

## Dependencies

Depends on: gt-9a2.3 (OutpostManager)
Can be done after basic outpost implementations work.


Update Refinery to use Beads merge queue

Replace branch discovery with Beads queue in the Refinery module:

Current (internal/refinery/manager.go):
- Scans for polecat/* branches
- Creates MR objects on-the-fly

New:
- Pull from Beads: bd ready --type=merge-request
- Process each MR
- Close with merge commit: bd close <id> --reason="Merged at <sha>"
- Handle failures: bd update <id> --status=blocked --reason="..."

The Engineer (agent) becomes Beads-native.
The Refinery (module) provides the infrastructure.


CLI: rig commands (add, list, show, remove)

GGT needs rig management commands.

Missing Commands:
- gt rig add <git-url> [--name NAME] - Add rig to workspace
- gt rig list - List all rigs with status
- gt rig show <rig> - Show detailed rig info
- gt rig remove <rig> - Remove a rig

PGT Reference: gastown-py/src/gastown/cli/rig_cmd.py

Current State:
- gt init creates rig structure but no ongoing management
- Rig discovery in internal/rig/manager.go but not exposed via CLI


Resource Beads: Leases, locks, and quotas

Resource beads represent reserved resources. Types: vm, lock, slot, quota. Fields: holder, expires, renewable. Daemon monitors for expiry and manages contention.


MQ dashboard widget: queue status in TUI

Add merge queue status widget to the Bubbletea TUI dashboard.

Display:
┌─────────────────────────────────────────────────┐
│              MERGE QUEUE STATUS                  │
├─────────────────────────────────────────────────┤
│ Pending: 3   In Progress: 1   Merged (24h): 12  │
├─────────────────────────────────────────────────┤
│ QUEUE:                                          │
│   ► gt-mr-004  P0  Nux/gt-xyz     Processing... │
│     gt-mr-005  P1  Toast/gt-abc   Ready         │
│     gt-mr-006  P1  Capable/gt-def Blocked (005) │
└─────────────────────────────────────────────────┘

Interactive features:
- Navigate queue entries
- View MR details
- Retry/reject from dashboard

Depends on: gt-u1j.2 (Bubbletea TUI dashboard)

Reference: docs/merge-queue-design.md#dashboard


Plugin surface for daemon lifecycle hooks

Allow rigs to customize daemon behavior via hooks/plugins.

## Hook Points

- on_heartbeat: Called during daemon heartbeat cycle
- on_worker_idle: Called when worker goes idle
- on_worker_stuck: Called when stuck detection triggers
- on_lifecycle_request: Called before processing lifecycle

## Configuration

```
<rig>/config/daemon-hooks.json
{
  "on_heartbeat": "./hooks/check-ci-status.sh",
  "on_worker_idle": "./hooks/maybe-assign-work.sh",
  "idle_threshold": "5m",
  "custom_signals": [
    {"name": "ci_status", "command": "./hooks/get-ci.sh"}
  ]
}
```

## Signal Contribution

Hooks can return signals that feed into decision engine:
- SKIP_POKE: Don't poke this agent
- FORCE_POKE: Override backoff, poke now
- CUSTOM_DATA: Extra context for logging

## Use Cases

- Check CI status before interrupting test runs
- Auto-assign work when worker becomes idle
- Custom stuck detection for specific workflows


Fix TestHasPolecat test failure in internal/session

TestHasPolecat in internal/session/manager_test.go fails because it expects
specific polecats (Toast, Cheedo) to exist in the test environment.

Error:
```
manager_test.go:46: expected hasPolecat(Toast) = true
manager_test.go:49: expected hasPolecat(Cheedo) = true
```

Fix: Either create test fixtures or mock the filesystem check.


Enhance Mayor CLAUDE.md with GGT milestone tracking

Update ~/ai/CLAUDE.md (Mayor startup context) with:

1. GGT Self-Hosting Milestone section
   - Track progress toward gt replacing town
   - Key blockers: gt-h5n (merge queue), gt-974 (daemon)
   - What "self-hosting" means (GGT working on itself)

2. Recent Architecture Decisions
   - Engineer = role, Refinery = place
   - Merge queue in Beads (not branch discovery)
   - Session restart protocol

3. Transition Plan
   - Current: use town commands (PGT)
   - Target: use gt commands (GGT)
   - Switch criteria: gt-b1g closed

Keep it concise - Mayor context should be quick to scan.


Merge: gt-3x1.3

branch: polecat/Doof
target: main
source_issue: gt-3x1.3
rig: gastown


CLI: mayor commands (start, attach, stop, status)

Mayor management CLI commands.

## Commands

### gt mayor start
```
gt mayor start [--continue] [--agent AGENT]
```
- --continue: Resume from previous session (check for handoff mail)
- --agent: claude (default) or other agent type

### gt mayor attach
```
gt mayor attach
```
Attach to running Mayor session.

### gt mayor stop
```
gt mayor stop [--grace-period N]
```
Stop Mayor session with optional grace period.

### gt mayor status
```
gt mayor status [--json]
```
Show Mayor running status.

## Session Management
Session name: `gt-mayor`
Working directory: `<town>/mayor/rig/` or `<town>/mayor/`

## Implementation
Similar to session commands but for special Mayor context.

```go
func getMayorPath(townRoot string) string {
    return filepath.Join(townRoot, "mayor")
}

func getMayorSessionName() string {
    return "gt-mayor"
}
```

## New File
internal/cmd/mayor.go

## PGT Reference
gastown-py/src/gastown/cli/mayor_cmd.py

## Acceptance Criteria
- [ ] gt mayor start launches Mayor session
- [ ] gt mayor attach works
- [ ] gt mayor stop with grace period
- [ ] gt mayor status shows running state


VM outpost setup: Terraform and documentation

## Overview

Documentation and optional Terraform for setting up VM outposts.

## Manual Setup Guide

```markdown
# Setting Up a VM Outpost

## Prerequisites
- GCE VM (or any Linux machine with SSH access)
- SSH key pair
- Git configured on VM

## Steps

1. Install Claude Code on VM:
   ```bash
   ssh user@vm
   npm install -g @anthropic-ai/claude-code
   ```

2. Clone Gas Town:
   ```bash
   mkdir -p ~/ai
   cd ~/ai
   gt install .
   ```

3. Configure Git credentials:
   ```bash
   git config --global user.name "Your Name"
   git config --global credential.helper store
   ```

4. Add outpost to local config:
   ```bash
   gt outpost add ssh \
     --name gce-burst \
     --host 10.0.0.5 \
     --user steve \
     --key ~/.ssh/gce_worker \
     --town-path /home/steve/ai \
     --max-workers 8
   ```

5. Test connectivity:
   ```bash
   gt outpost ping gce-burst
   ```
```

## Terraform Module (Optional)

```hcl
# deploy/terraform/vm-outpost/main.tf

variable "project" {}
variable "zone" { default = "us-central1-a" }
variable "machine_type" { default = "e2-standard-4" }

resource "google_compute_instance" "outpost" {
  name         = "gastown-outpost"
  machine_type = var.machine_type
  zone         = var.zone

  boot_disk {
    initialize_params {
      image = "ubuntu-2204-lts"
      size  = 100
    }
  }

  network_interface {
    network = "default"
    access_config {}
  }

  metadata_startup_script = file("${path.module}/startup.sh")
}

output "external_ip" {
  value = google_compute_instance.outpost.network_interface[0].access_config[0].nat_ip
}
```

## Files

- `docs/vm-outpost-setup.md`
- `deploy/terraform/vm-outpost/` (optional)

Depends on: gt-9a2.5 (SSHOutpost)


Outpost CLI commands: gt outpost list/status/add

## Overview

CLI commands for managing outposts.

## Commands

```bash
# List configured outposts
gt outpost list
NAME            TYPE       WORKERS   STATUS
local           local      2/4       healthy
gce-burst       ssh        0/8       healthy
cloudrun-burst  cloudrun   0/20      healthy

# Detailed status
gt outpost status [name]
Outpost: cloudrun-burst
Type: cloudrun
Project: my-gcp-project
Region: us-central1
Service: gastown-worker
Active Workers: 3/20
Cost (today): $0.42
Status: healthy

# Add new outpost interactively
gt outpost add
? Outpost type: [local/ssh/cloudrun]
> cloudrun
? Name: cloudrun-burst
? GCP Project: my-gcp-project
...

# Add via flags
gt outpost add cloudrun --name burst --project my-proj --region us-central1

# Remove outpost
gt outpost remove <name>

# Test connectivity
gt outpost ping <name>
```

## Files

- `cmd/gt/outpost.go` - Cobra command group
- `cmd/gt/outpost_list.go`
- `cmd/gt/outpost_status.go`
- `cmd/gt/outpost_add.go`

Depends on: gt-9a2.3 (config/manager)


Git wrapper: shell out to git

Wrapper for git operations via subprocess.

## Interface

```go
type Git struct {
    workDir string
}

func NewGit(workDir string) *Git

// Core operations
func (g *Git) Clone(url, dest string) error
func (g *Git) Checkout(ref string) error
func (g *Git) Fetch(remote string) error
func (g *Git) Pull(remote, branch string) error
func (g *Git) Push(remote, branch string, force bool) error

// Commit operations
func (g *Git) Add(paths ...string) error
func (g *Git) Commit(message string) error
func (g *Git) CommitAll(message string) error

// Query operations
func (g *Git) Status() (*GitStatus, error)
func (g *Git) CurrentBranch() (string, error)
func (g *Git) HasUncommittedChanges() (bool, error)
func (g *Git) RemoteURL(remote string) (string, error)

// Merge operations
func (g *Git) Merge(branch string) error
func (g *Git) Rebase(onto string) error
func (g *Git) AbortMerge() error
func (g *Git) AbortRebase() error
```

## Implementation

Shell out to git binary via exec.Command. Parse output where needed (Status, CurrentBranch).

## Error Handling

- Wrap git stderr in error messages
- Detect specific failures (merge conflict, auth failure, not a repo)
- Return structured errors for callers to handle

## Testing

- Use temp directories with real git repos
- Test both success and failure paths


Config package: Config, State types and JSON serialization

Config and state types with JSON serialization.

## Town Config (config/town.json)

```go
type TownConfig struct {
    Type      string    `json:"type"`       // "town"
    Version   int       `json:"version"`    // schema version
    Name      string    `json:"name"`       // town identifier
    CreatedAt time.Time `json:"created_at"`
}
```

## Rigs Registry (config/rigs.json)

```go
type RigsConfig struct {
    Version int                `json:"version"`
    Rigs    map[string]RigEntry `json:"rigs"`
}

type RigEntry struct {
    GitURL   string    `json:"git_url"`
    AddedAt  time.Time `json:"added_at"`
    BeadsConfig *BeadsConfig `json:"beads,omitempty"`
}

type BeadsConfig struct {
    Repo   string `json:"repo"`   // "local" | path | git-url
    Prefix string `json:"prefix"` // issue prefix
}
```

## Agent State (*/state.json)

```go
type AgentState struct {
    Role       string    `json:"role"`       // "mayor", "witness", etc.
    LastActive time.Time `json:"last_active"`
    Session    string    `json:"session,omitempty"`
    Extra      map[string]any `json:"extra,omitempty"`
}
```

## Interface

```go
func LoadTownConfig(path string) (*TownConfig, error)
func SaveTownConfig(path string, config *TownConfig) error

func LoadRigsConfig(path string) (*RigsConfig, error)
func SaveRigsConfig(path string, config *RigsConfig) error

func LoadAgentState(path string) (*AgentState, error)
func SaveAgentState(path string, state *AgentState) error
```

## Validation

- Version compatibility checks
- Required field validation
- Path existence verification


Doctor framework: Check interface, Result types, Report

Framework for gt doctor health checks.

## Check Interface

```go
type Check interface {
    Name() string
    Description() string
    Run(ctx *CheckContext) *CheckResult
    Fix(ctx *CheckContext) error  // optional auto-fix
    CanFix() bool
}

type CheckContext struct {
    TownRoot string
    RigName  string  // empty for town-level checks
    Verbose  bool
}

type CheckResult struct {
    Status  CheckStatus
    Message string
    Details []string  // additional info
    FixHint string    // suggestion if not auto-fixable
}

type CheckStatus int
const (
    StatusOK CheckStatus = iota
    StatusWarning
    StatusError
)
```

## Report

```go
type Report struct {
    Timestamp time.Time
    Checks    []CheckResult
    Summary   ReportSummary
}

type ReportSummary struct {
    Total    int
    OK       int
    Warnings int
    Errors   int
}

func (r *Report) Print(w io.Writer, verbose bool)
```

## Doctor Runner

```go
type Doctor struct {
    checks []Check
}

func NewDoctor() *Doctor
func (d *Doctor) Register(check Check)
func (d *Doctor) Run(ctx *CheckContext) *Report
func (d *Doctor) Fix(ctx *CheckContext) *Report  // run with auto-fix
```

## Built-in Checks

Town-level (gt-f9x.5):
- ConfigExists, ConfigValid
- StateExists, StateValid
- MayorMailboxExists
- RigsRegistryValid

Rig-level (gt-f9x.6):
- RigCloneExists
- GitExcludeConfigured
- WitnessExists, RefineryExists
- PolecatClonesValid


gt mq integration create: create integration branch for epic

Implement 'gt mq integration create <epic>' command.

Actions:
1. Verify epic exists
2. Create branch: integration/<epic-id> from main
3. Push to origin
4. Store integration branch info in epic metadata

Usage:
  gt mq integration create gt-auth-epic
  # Creates integration/gt-auth-epic from main

Future MRs for this epic's children will auto-target this branch.

Reference: docs/merge-queue-design.md#integration-branches


CLI: names commands for polecat naming pool

Polecat naming pool for auto-generated names.

## Commands

### gt names generate
```
gt names generate [--count N]
```
Generate N names from pool.

### gt names add
```
gt names add <name>...
```
Add custom names to pool.

### gt names list
```
gt names list
```
Show available and used names.

### gt names reset
```
gt names reset [--keep-used]
```
Reset pool to defaults.

## Config File
<rig>/town/naming.json:
```json
{
  "enabled": true,
  "auto_refill": true,
  "refill_threshold": 5,
  "pool": {
    "available": ["Toast", "Nux", "Capable", ...],
    "used": ["Alice", "Bob"]
  }
}
```

## Default Pool
Mad Max themed: Toast, Nux, Capable, Furiosa, Immortan, etc.

## Integration
gt polecat add calls naming pool if no name given:
```go
if name == "" {
    name, err = naming.Generate(rigPath)
}
```

## New Package
internal/naming/
├── pool.go     # Pool management
└── defaults.go # Default name lists

## Acceptance Criteria
- [ ] Auto-generate names on polecat add
- [ ] Track used vs available
- [ ] Auto-refill when low
- [ ] Custom names addable


Crew workers getting wrong CLAUDE.md (shows Refinery)

## Problem

Crew workers (emma, dave) have CLAUDE.md that says they're the Refinery.

## Evidence

```
$ head -5 /Users/stevey/gt/beads/crew/emma/CLAUDE.md
# Claude: Beads Refinery
You are the **Refinery** for the **beads** rig...
```

## Expected

Should use crew.md.tmpl which correctly says:
```
# Crew Worker Context
You are a **crew worker** - the overseer's (human's) personal workspace...
```

## Impact

- Crew workers have wrong identity in static context
- `gt prime` correctly outputs crew context, but CLAUDE.md conflicts
- Confusing role information

## Fix

Check `gt crew create` or whatever populates CLAUDE.md for crew workers.


CLI: doctor diagnostics and auto-repair

GGT completely lacks the doctor command which is critical for debugging.

Required Commands:
- gt doctor [<rig>] - Run diagnostic checks
- gt doctor --fix - Auto-repair common issues

Checks to Implement:
Workspace Level: Config validity, Mayor mailbox, Rig registry
Rig Level: Git state, clone health, witness/refinery presence, beads sync
Swarm Level: Stuck detection, zombie sessions, heartbeat health

PGT Reference: gastown-py/src/gastown/cli/dashboard_cmd.py


gt mq integration status: show integration branch status

Implement 'gt mq integration status <epic>' command.

Display:
- Integration branch name and creation date
- Commits ahead of main
- MRs merged to integration (closed)
- MRs pending (open, targeting integration)
- Comparison: main..integration/<epic>

Output example:
  Integration: integration/gt-auth-epic
  Created: 2025-12-17
  Ahead of main: 5 commits

  Merged MRs (3):
    gt-mr-001  Fix login timeout
    gt-mr-002  Fix session expiry
    gt-mr-003  Update auth config

  Pending MRs (1):
    gt-mr-004  Update auth tests (in_progress)

Reference: docs/merge-queue-design.md#integration-branches


Hook system for event extensibility

GGT needs hook system for extensibility like PGT.

## Event Types
```go
type Event string
const (
    EventPreSessionStart  Event = "pre-session-start"
    EventPostSessionStart Event = "post-session-start"
    EventPreShutdown      Event = "pre-shutdown"
    EventPostShutdown     Event = "post-shutdown"
    EventOnPaneOutput     Event = "on-pane-output"
    EventSessionIdle      Event = "session-idle"
    EventMailReceived     Event = "mail-received"
    EventWorkAssigned     Event = "work-assigned"
)
```

## Hook Configuration
File: .claude/hooks.json or .gastown/hooks.json
```json
{
  "hooks": {
    "pre-shutdown": [
      {"type": "command", "cmd": "./scripts/pre-shutdown.sh"}
    ],
    "on-pane-output": [
      {"type": "command", "cmd": "./scripts/activity-monitor.sh"}
    ]
  }
}
```

## Hook Types
1. **Command**: Execute external script
2. **Built-in**: Internal Go functions (pre-shutdown checks)

## Hook Interface
```go
type HookRunner struct {
    config *HookConfig
}

type HookResult struct {
    Success bool
    Message string
    Block   bool  // For pre-* hooks: should operation be blocked?
}

func (r *HookRunner) Fire(event Event, ctx *HookContext) []HookResult
```

## CLI Commands
```
gt hooks list [<event>]    # List registered hooks
gt hooks fire <event>      # Manually fire for testing
gt hooks test [--all]      # Validate hook config
```

## Integration Points
- internal/session/manager.go: Fire pre/post session hooks
- internal/mail/router.go: Fire mail-received hook

## New Package
internal/hooks/
├── types.go    # Event, HookConfig, HookResult
├── runner.go   # HookRunner, Fire()
└── builtin.go  # Built-in hooks (pre-shutdown checks)

## PGT Reference
gastown-py/src/gastown/hooks/

## Acceptance Criteria
- [ ] Hook config loading from JSON
- [ ] Command hooks execute subprocess
- [ ] Pre-shutdown hook integration with session stop
- [ ] CLI for listing and testing hooks


Design: Work flow simulation and validation

Validate GGT designs through simulation before implementation.

## Validation Approaches

### 1. Dry-Run Simulation (Recommended First)
Mayor walks through scenarios mentally/on paper:
- "If polecat Toast signals done with dirty git state, what happens?"
- "If Witness context fills mid-verification, what state is lost?"
- "If two polecats try to close same issue, what happens?"

Create beads for any gaps discovered.

### 2. Real Work in gastown-py
Use Python Gas Town to stress-test assumptions:
- Run actual batch work on test repos
- Observe edge cases in practice
- Document issues found

### 3. Edge Case Analysis
Systematic review of failure modes:
- Agent crashes mid-operation
- Network failures during sync
- Concurrent access to shared state
- Context limits hit at bad times

## Key Scenarios to Validate

- [ ] Witness session cycling (state preservation)
- [ ] Polecat decommission with dirty state
- [ ] Merge conflicts in queue
- [ ] Beads sync conflicts between workers
- [ ] Escalation path (stuck worker -> Mayor)
- [ ] Cross-rig communication
- [ ] Federation mail routing (future)

## Success Criteria

- No data loss scenarios identified
- Clear recovery paths for all failure modes
- Edge cases either handled or documented as limitations
- Design improves as model cognition improves

## Output

For each scenario validated:
1. Document in relevant bead if issue found
2. Create new beads for missing functionality
3. Update architecture.md if design changes


Merge: gt-72so

branch: polecat/Doof
target: main
source_issue: gt-72so
rig: gastown


Outpost integration tests: Mock and E2E testing

## Overview

Integration tests for the outpost system.

## Mock Outpost

```go
type MockOutpost struct {
    name        string
    maxWorkers  int
    spawnDelay  time.Duration
    spawnError  error
    workers     []*MockWorker
}

func (o *MockOutpost) Spawn(issue string, cfg WorkerConfig) (Worker, error) {
    if o.spawnError != nil {
        return nil, o.spawnError
    }
    time.Sleep(o.spawnDelay)
    worker := &MockWorker{id: uuid.New().String(), issue: issue}
    o.workers = append(o.workers, worker)
    return worker, nil
}
```

## Unit Tests

```go
func TestOutpostManager_SelectOutpost(t *testing.T) {
    // Test policy-based selection
}

func TestOutpostManager_SpawnWithRetry(t *testing.T) {
    // Test retry logic with transient failures
}

func TestCloudRunOutpost_CostTracking(t *testing.T) {
    // Test cost calculation and caps
}
```

## Integration Tests (with mocked Cloud Run)

```go
func TestCloudRunOutpost_Integration(t *testing.T) {
    // Start mock HTTP server
    server := httptest.NewServer(mockWorkHandler())
    defer server.Close()

    outpost := NewCloudRunOutpost(OutpostConfig{
        ServiceURL: server.URL,
    })

    worker, err := outpost.Spawn("test-issue", WorkerConfig{})
    // Assert worker created, events streamed
}
```

## E2E Tests (requires real Cloud Run)

```go
// +build e2e

func TestCloudRunOutpost_E2E(t *testing.T) {
    if os.Getenv("CLOUDRUN_SERVICE_URL") == "" {
        t.Skip("CLOUDRUN_SERVICE_URL not set")
    }
    // Test against real Cloud Run service
}
```

## Files

- `internal/outpost/mock_test.go`
- `internal/outpost/manager_test.go`
- `internal/outpost/cloudrun_test.go`
- `internal/cloudrun/integration_test.go`

## Dependencies

Depends on: gt-9a2.8 (CloudRunOutpost), gt-9a2.15 (error handling)
Lower priority - can be done after implementations work.


gt molecule seed: create built-in molecules as beads

The molecule infrastructure is complete but built-in molecules (engineer-in-box, quick-fix, research) need to be seeded into the beads database.

## Current State
- `gt molecule list` works but shows 0 molecules
- BuiltinMolecules() in internal/beads/builtin_molecules.go has 3 molecules defined
- No way to create them as beads

## Needed
Add `gt molecule seed` command that:
1. Reads BuiltinMolecules()
2. Creates each as a bead with type: molecule
3. Uses well-known IDs (mol-engineer-in-box, mol-quick-fix, mol-research)
4. Idempotent (skip if already exists)

## Acceptance Criteria
```
gt molecule seed
gt molecule list   # Shows 3 built-in molecules
```

## Parent
gt-4nn: Molecules epic


gt rig shutdown: Gracefully stop all rig agents

Add 'gt rig shutdown <rig>' command to gracefully stop all agents in a rig.

Should:
- Stop all polecat sessions
- Stop refinery
- Stop witness
- Optionally wait for graceful shutdown with timeout


Town & Rig Management: install, doctor, federation

Reify the Gas Town installation as a first-class concept.

## Goals
- Installable: gt install [path] creates complete installation
- Diagnosable: gt doctor checks and fixes issues
- Federable: Clone town to VMs with central control

## Architecture Reference

See docs/architecture.md for full design, especially:
- Directory structure (Town Level / Rig Level sections)
- Configuration (town.json, rigs.json schemas)
- Key design decisions (visible config dir, decentralized agents)


Daemon: proper rig discovery

Currently discovers rigs by scanning tmux session names for gt-*-witness pattern. Should instead:
- Read rigs from mayor/rigs.json
- Or scan town directory for .gastown subdirs
- Handle rigs that exist but don't have running witnesses


Add bulk session stop command (gt session stop --all)

When decommissioning a rig, need to stop multiple sessions one at a time. A --all or --rig flag would allow: gt session stop --rig gastown


gt session restart/status: Complete session management

Add missing session subcommands:

- gt session restart <rig> <polecat> - Restart a session (stop + start)
- gt session status <rig> <polecat> - Show session status details

status should show:
- Running state
- Uptime
- Current activity
- Last output timestamp


Merge: gt-g44u.1

branch: polecat/Ace
target: main
source_issue: gt-g44u.1
rig: gastown


Merge: gt-a95

branch: polecat/Ace
target: main
source_issue: gt-a95
rig: gastown


detectSender() doesn't recognize crew workers

## Problem

detectSender() in internal/cmd/mail.go only checks for /polecats/ directories. Crew workers in /crew/<name>/ fall through to the default 'mayor/', so:
- gt mail inbox shows mayor's inbox instead of the crew worker's
- gt mail send sets the wrong From address

## Fix

Add crew worker detection before the /polecats/ check:

if strings.Contains(cwd, "/crew/") {
    parts := strings.Split(cwd, "/crew/")
    ...
    return fmt.Sprintf("%s/crew/%s", rigName, crewMember)
}

## Affected
- Any crew worker running gt mail inbox without explicit address
- Crew worker handoffs (wrong sender)


Default polecat names: Mad Max theme instead of AdjectiveNoun

Current default naming for new polecats uses AdjectiveNoun convention.
Since rigs already provide namespacing, we can use more thematic names.

Suggestion: Use Mad Max / Fury Road character and vehicle names as defaults.
Examples: Furiosa, Nux, Slit, Morsov, Toast, Rictus, Warboy, etc.

Could also include:
- War Rig parts: Guzzler, Tanker, Pursuit
- Citadel roles: Imperator, Blackthumb, Organic
- Wasteland terms: Chrome, Witness, Shiny

Implementation:
- Add name generator in internal/polecat/ or similar
- Use when --create flag is used without explicit name
- Cycle through pool to avoid duplicates within a rig


CLI: all command for batch polecat operations

Batch operations across multiple polecats.

## Commands

### gt all start
```
gt all start [--awake-only] [<specs>...]
```
Start sessions for multiple polecats.
- --awake-only: Only start awake polecats
- specs: Polecat names, rig/polecat patterns

### gt all stop
```
gt all stop [<specs>...] [--force]
```
Stop sessions for multiple polecats.

### gt all status
```
gt all status [<specs>...] [--json]
```
Show status of multiple polecats.

### gt all attach
```
gt all attach [<specs>...]
```
Attach to multiple sessions in tmux panes/windows.

### gt all run
```
gt all run <command> [<specs>...]
```
Run command in multiple polecat sessions.

## Spec Patterns
- `Toast`: Specific polecat (in default/current rig)
- `gastown/Toast`: Specific rig/polecat
- `gastown/*`: All polecats in rig
- `*`: All polecats everywhere

## Implementation
```go
func expandSpecs(specs []string, awakeOnly bool) ([]*polecat.Polecat, error) {
    // Expand patterns to list of polecats
}

func runForAll(polecats []*polecat.Polecat, action func(*polecat.Polecat) error) error {
    // Run action for each, collect errors
}
```

## New File
internal/cmd/all.go

## PGT Reference
gastown-py/src/gastown/cli/all_cmd.py

## Acceptance Criteria
- [ ] Pattern expansion works
- [ ] Parallel execution where safe
- [ ] Aggregate error reporting
- [ ] --awake-only filter works


Git safety audit module

Port git_audit.py safety checks to Go.

## Purpose

Before destroying polecat clones, verify no code is at risk.

## Checks

1. Uncommitted changes (staged and unstaged)
2. Unpushed commits
3. Git stashes
4. Local-only branches (not tracking remote)

## Beads-Only Classification

Some files are safe to discard:
- .beads/*
- .claude/settings.json

Changes only affecting these = "beads-only" = safe to destroy.

## Interface

```go
type GitAuditResult struct {
    Polecat              string
    Path                 string
    UncommittedFiles     []string
    UncommittedIsBeadsOnly bool
    UnpushedCommits      int
    Stashes              []StashInfo
    StashesAreBeadsOnly  bool
    LocalBranches        []string
    Error                error
}

func (r *GitAuditResult) HasCodeAtRisk() bool

func AuditPolecat(name string, path string) *GitAuditResult
func AuditPolecats(polecats []PolecatInfo) []*GitAuditResult
```

## Reference

PGT: swarm/git_audit.py


gt witness: Witness management commands

Add 'gt witness' command group for witness lifecycle management.

Subcommands:
- gt witness start [rig] - Start witness for a rig
- gt witness stop [rig] - Stop witness
- gt witness status [rig] - Show witness status
- gt witness attach [rig] - Attach to witness session

Witness monitors polecats and handles:
- Idle detection and cleanup
- Session health checks
- Nudging stuck agents


SSHOutpost: Full Gas Town clone on remote VM

## Overview

Implement SSHOutpost for running workers on remote VMs via SSH.

## Model

Remote VM has a full Gas Town clone. SSHOutpost:
- Connects via SSH
- Spawns tmux sessions on remote
- Uses remote git clone for code/beads
- Syncs via git push/pull

## Implementation

```go
type SSHOutpost struct {
    name       string
    host       string
    user       string
    keyPath    string
    townPath   string  // e.g., /home/steve/ai
    maxWorkers int
    conn       *ssh.Client
}

func NewSSHOutpost(config OutpostConfig) (*SSHOutpost, error)

func (o *SSHOutpost) Spawn(issue string, cfg WorkerConfig) (Worker, error) {
    // SSH: create tmux session on remote
    // SSH: start claude in session
    // Return SSHWorker
}

func (o *SSHOutpost) Ping() error {
    // Test SSH connectivity
}
```

## SSHWorker

```go
type SSHWorker struct {
    outpost *SSHOutpost
    id      string
    session string
    issue   string
}

func (w *SSHWorker) Attach() error {
    // SSH + tmux attach (opens terminal)
}

func (w *SSHWorker) Logs() (io.Reader, error) {
    // SSH: tmux capture-pane
}
```

## Prerequisites on Remote VM

1. Gas Town clone at townPath
2. Claude Code installed
3. Git credentials configured
4. SSH key access

## Integration with gt-f9x.7-8

This builds on the Connection interface from gt-f9x.7/8. SSHOutpost uses SSHConnection internally for remote operations.

Depends on: gt-9a2.1 (interfaces), gt-f9x.7 (Connection interface)


Refinery semantic merge processing loop

Implement the Refinery semantic merge loop for processing polecat work.

## Overview

The Refinery is a fully empowered Claude Code agent that:
1. Fetches polecat branches
2. Merges to integration branch
3. Resolves conflicts semantically (re-implements if needed)
4. Runs tests
5. Escalates only when truly stuck

## Processing Loop

1. Check queue for completed tasks (polecat done, not yet merged)
2. For each task:
   - Fetch polecat branch
   - Attempt merge to integration/<swarm-id>
   - On conflict: semantic resolution (understand intent, re-implement)
   - Run tests if configured
   - On success: mark merged, file bead, notify witness
   - On failure: notify polecat (test fail) or escalate (stuck)
3. When all tasks merged: land integration to main

## Semantic Merge

When git merge fails, Refinery:
1. Reads polecat changes and beads issue
2. Understands intent
3. Re-implements on current integration branch
4. Only escalates if truly blocked

## Daemon Poking

Refinery is poked by:
- Daemon heartbeat (periodic)
- Witness notification (polecat done)
- Mayor request (check queue)

## Dependencies

Needs: gt-u1j.6 (mail), gt-u1j.3 (git), gt-u1j.14 (merge queue)

## Reference

See PGT ephemeral.py for branch operations.


Test merge request

branch: polecat/Test/gt-test
target: main
source_issue: gt-test
worker: TestWorker
rig: gastown


Crew workers: design documentation and remaining work

## Summary

Crew workers are user-managed persistent workspaces within a rig, distinct from polecats.

## Current Implementation

### Commands (all working)
- `gt crew add <name>` - Create workspace (git clone)
- `gt crew list` - List workspaces with status
- `gt crew at <name>` - Attach to tmux session
- `gt crew remove <name>` - Remove workspace
- `gt crew pristine [<name>]` - git pull + bd sync
- `gt crew refresh <name>` - Context cycle with handoff mail
- `gt crew status [<name>]` - Detailed status
- `gt crew rename <name>` - Rename workspace

### Crew vs Polecat

| Aspect | Crew | Polecat |
|--------|------|---------|
| Lifecycle | User-managed | Witness-managed |
| Scheduling | Manual | `gt spawn` |
| Merge flow | Direct push OK | Integration branch → refinery |
| Garbage collection | Never | Auto on completion |
| Identity | Long-lived (emma, dave) | Ephemeral (Nux, Toast) |

## Known Bugs

- **gt-70b3**: detectSender() doesn't recognize crew workers
- **gt-vdp0**: Crew CLAUDE.md shows Refinery template

## Potential Enhancements

1. Rebase helper in `gt crew pristine` for conflict resolution
2. Cross-rig crew support (crew worker in multiple rigs?)
3. Better mail identity auto-detection for crew


CLI: plugin commands (list, status)

Add gt plugins <rig> to list plugins and gt plugin status <name> to check plugin state. Simple directory scan of <rig>/plugins/.


Tmux status line: rig color themes and worker identity display

## Summary

Customize tmux status line for Gas Town workers with:
1. Per-rig configurable color themes
2. Clear worker name and role visibility

## Current Problem

- Only mayor shows in status line (and truncated)
- Can't tell which rig/worker you're looking at
- All sessions look the same

## Proposed Design

### Per-rig colors
```yaml
# In rig config or beads
theme:
  primary: '#ff6600'    # Orange for gastown
  secondary: '#333333'
  accent: '#ffcc00'
```

### Status line format
```
[gastown/Rictus] polecat | gt-70b3 | branch: polecat/Rictus
[beads/emma] crew | working | branch: main
[mayor] coordinator | idle
```

### Components
- Rig name with rig color
- Worker name
- Role (polecat/crew/mayor/witness/refinery)
- Current issue or status
- Branch name

## Configuration

Could use pinned beads for this (see gm-w13, beads-6v2):
- `bd show <rig>-theme` returns theme config
- Stored as pinned bead, always available
- Part of 'config in beads data plane' initiative

Implementation complete. Core features: per-rig color themes, dynamic status line with issue/mail indicators, gt theme/issue commands. Ready for testing.


Refinery Engineer: Role prompting and CLAUDE.md

Create refinery/CLAUDE.md with Chief Merge Engineer role context. Include:
- Role identity and responsibilities
- Decision authority (merge order, test frequency, binary rebuilds)
- Communication patterns (Witness, Deacon)
- Session lifecycle (handoff bead protocol)
- Key commands reference


Swarm learning: Refinery merge queue automation

Manually merging 15 polecat branches was painful and error-prone. Refinery should automate: detect completed work, run tests, merge to main, handle conflicts. This is core Refinery value prop.


Witness updates: Remove issue filing proxy

Update Witness prompting to remove issue filing proxy, since polecats now have direct beads access.

## Remove from Witness Prompting

The following is NO LONGER Witness responsibility:
- Processing polecat 'file issue' mail requests
- Creating issues on behalf of polecats
- Forwarding issue creation requests

## Add: Legacy Request Handling

If Witness receives an old-style 'please file issue' request:

1. Respond with update:
   town inject <polecat> "UPDATE: You have direct beads access now. Use bd create to file issues yourself."

2. Do not file the issue - let the polecat learn the new workflow.

## Keep in Witness Prompting

- Monitoring polecat progress
- Nudge protocol
- Pre-kill verification
- Session lifecycle management


gt crew at: auto-prime when exec'ing Claude in-session

When running 'gt crew at <name>' from inside the target session, we exec Claude directly. But this means we can't send 'gt prime' afterward since we ARE the process.

Possible solutions:
1. Claude startup hook that runs gt prime
2. Pass prompt as argument to claude CLI
3. Wrapper script approach

Related: crew resume prompt also can't be sent in this path.


Session cycling UX: smooth transitions via TUI wrapper

## Problem

Current CLI agent session cycling is painful:
- Shell → CC starts → priming → context loads → ready → work → exit/crash → repeat
- Each cycle is 30-60 seconds of cold boot
- No continuity between shell and agent's inner state
- Raw "session not running, starting..." loop is the baseline

## GGT Advantages (already have)

- Beads: Work state survives session death completely
- Mail: Handoff notes from past-self to future-self
- Prime commands: Structured context reload

## Gap: Transition Mechanics

Ideas to explore when actively using CLI:

1. **In-band cycling** - `/restart` or `/cycle` command, agent handles own restart without dropping to shell

2. **Hot standby** - TUI maintains pre-warmed session in background, switch to already-primed agent

3. **Persistent wrapper** - Bubbletea TUI stays running across session cycles, CC sessions come/go inside it

4. **Session pooling** - Keep 2-3 primed sessions ready, never wait for cold start

## Deferred

Deliberately P4 until we're actively using the simpler CLI and feel the pain firsthand.


Merge: gt-72so

branch: polecat/Ace
target: main
source_issue: gt-72so
rig: gastown