mol-outpost-assign: Intelligent work routing to outposts

The federation design shows outposts.yaml with a static policy section. Simple preference ordering is fine as config, but intelligent work routing should be a molecule.

Current static approach:
```yaml
policy:
  default_preference: [local, gce-burst, cloudrun-burst]
```

Cases requiring cognition:
- "This is a long-running research task, route to VM not CloudRun"
- "This touches sensitive code, keep local"
- "These 5 issues are related, batch them to same outpost"
- "CloudRun cost is high today, prefer local even if slower"

## Molecule: outpost-assign
Intelligent work-to-outpost routing.

## Step: classify-work
Analyze the issue/work item:
- Expected duration (quick fix vs multi-hour)
- Resource requirements
- Sensitivity/security tier
- Related work (same epic?)

## Step: check-capacity
Query outpost status:
- Current load on each
- Cost accrued today
- Health status

## Step: select-outpost
Choose optimal outpost based on:
- Work classification
- Capacity/cost
- Policy constraints
Needs: classify-work, check-capacity

## Step: emit-assignment
Record decision in beads for audit.
Needs: select-outpost

## Notes
- This molecule is invoked by Mayor/Witness when spawning
- Simple cases can short-circuit to static policy
- Full analysis only for ambiguous cases


Replaceable notifications via Claude Code queue

Leverage Claude Code's ability to replace queued text for notifications that supersede previous ones.

## Problem

If daemon sends 10 heartbeats while agent is busy, agent returns to see 10 stacked messages. Wasteful and noisy.

## Solution

Use Claude Code's queue replacement for:
- Heartbeat messages (only latest matters)
- Status updates that supersede previous
- Progress notifications

## Implementation

Notifications get a 'slot' identifier. New notification in same slot replaces old one:
- Slot: 'heartbeat' → only one heartbeat queued at a time
- Slot: 'status-<rig>' → latest status per rig
- No slot → stacks normally (for unique messages)

## Research Needed

- How does Claude Code expose queue replacement?
- tmux send-keys behavior with pending input
- Alternative: clear + resend pattern


CLI: plugin commands (list, status)

Add gt plugins <rig> to list plugins and gt plugin status <name> to check plugin state. Simple directory scan of <rig>/plugins/.


Update gt doctor to check new config locations

Doctor should validate new structure:
- Check mayor/config.json exists and is valid
- Check settings/ exists for each rig
- Warn if old .gastown/ files still exist
- Offer --fix to migrate old locations to new


implement

Implement the solution for gt-qwyu. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


gt mq list shows empty when MRs exist

The gt mq list command returns empty results even when merge requests exist in the queue.


Polecat health check loop

Implement the Witness health check loop:

Every 60 seconds:
1. List active polecats (gt polecats <rig>)
2. For each polecat, check:
   - Is tmux session still alive?
   - Is there a state.json with recent update?
   - Has there been git activity recently?
3. If stuck (no activity for configurable threshold):
   - First: nudge (send message asking for status)
   - Second: escalate to Mayor
   - Third: force kill after human confirmation

This is the 'health monitor' part of Witness.


Refinery agent: merge queue processing loop

The Refinery agent processes the merge queue, merging polecat work to main.

## Interface

```go
type Refinery struct {
    rig    *Rig
    queue  *MergeQueue
    git    *Git
    mail   *Mailbox
    config RefineryConfig
}

type RefineryConfig struct {
    AutoMerge     bool          // Auto-merge passing MRs
    RunTests      bool          // Run tests before merge
    TestCommand   string        // Command to run tests
    RequireReview bool          // Require review before merge (future)
}

func NewRefinery(rig *Rig, ...) *Refinery

// Lifecycle
func (r *Refinery) Start() error
func (r *Refinery) Stop() error
func (r *Refinery) IsRunning() bool

// Processing
func (r *Refinery) ProcessQueue() error
func (r *Refinery) ProcessMR(mr *MergeRequest) error
```

## Processing Loop

1. Check queue for pending MRs
2. For each pending MR:
   a. Fetch polecat branch
   b. Attempt merge to refinery/rig (local main)
   c. Run tests if configured
   d. If pass: push to origin, mark merged
   e. If fail: mark rejected, notify polecat
3. Sleep, repeat

## Merge Strategy

- Fast-forward when possible
- Merge commit when not
- On conflict: reject MR, polecat must rebase

## Test Integration

If tests configured:
```bash
cd refinery/rig
git merge polecat/branch
<test_command>  # e.g., go test ./...
```
Result determines merge/reject.

## Notifications

On merge success:
- Mail to polecat: "Your work merged"
- Update bead if issue tracked

On merge failure:
- Mail to polecat: "Merge failed: <reason>"
- Include conflict details if applicable

## Dependencies

Needs: Rig management, Git wrapper, Mail system, Merge queue


Deacon session cycling: first step of rounds

First step of every Deacon wake cycle: check if a fresh session is needed.

## Why First

Token costs are quadratic with session length. A Deacon running for hours
accumulates massive context. Better to cycle early and often.

## Implementation

At wake, before doing anything else:

1. Check context budget estimate (conversation turns, tool calls, etc.)
2. If budget is low (e.g., >50% consumed), request cycle:
   - Write handoff mail to self with current state
   - Request lifecycle: cycle via daemon
   - Daemon kills session, starts fresh
   - New session reads handoff mail, continues

## Decision Criteria

- Conversation turns > N (configurable, default 50?)
- Explicit "context feels heavy" signal from Claude
- Time since last cycle > M hours (configurable, default 4?)
- Forced cycle on certain events (e.g., major config change)

## State to Preserve in Handoff

- Current health status
- Pending lifecycle requests (in flight)
- Plugin state (last run times, outcomes)
- Any active timers

## Relation to Daemon

The Deacon requests its own cycle via the same lifecycle mechanism:
```
gt mail send deacon/ -s "LIFECYCLE: deacon/ requesting cycle" -m "..."
```

Daemon sees this, kills gt-deacon session, respawn loop restarts it.


Phase 2: Quiescent agents (Witness, Refinery)

Enable Witness and Refinery to sleep until triggered.

## Scope
- Wake triggers: gt spawn, MR submit, mail, Deacon ping
- Wake SLA: <1 minute
- mol-witness-patrol and mol-refinery-patrol definitions
- Quiescent entry/exit protocol

## Implementation
- Kill tmux session on quiescent entry
- Preserve sandbox (worktree, state files)
- Restart session on wake trigger
- Agent checks pinned, spawns default patrol if naked

Depends: Phase 1 complete


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue (gt-test) and understand the requirements.
Identify any blockers or missing information.


TODO: Detect cycles in molecule dependency graph

molecule.go:302 has a TODO to detect cycles in the dependency graph. Currently, cyclical dependencies could cause issues.


generate-summary

Generate a summary for molecule squash.
File any remaining work as issues.

Document any important context for the squash digest.

Depends: submit-merge


Implement shared beads architecture for rig

Implement redirect-based shared beads to eliminate git sync overhead within a rig.

## Background
Each polecat currently has its own .beads/ directory synced via git. This burns tokens on sync operations.

## Solution
Use bd's redirect feature:
1. Create single shared .beads/ at rig root
2. Polecats get redirect files pointing to shared location
3. All agents connect to same daemon
4. SQLite WAL + daemon serialization handles concurrency

## Implementation
1. Create shared .beads/ at rig root (e.g., ~/gt/gastown/.beads/)
2. Update gt spawn to create redirect files:
   mkdir -p polecats/nux/.beads
   echo ../../.beads > polecats/nux/.beads/redirect
3. Test that all polecats connect to same daemon
4. Remove git sync from intra-rig workflow
5. Keep JSONL export for backup/cross-rig only

## Reference
beads/polecats/rictus/internal/beads/beads.go:45 - followRedirect()


Add --fart as easter egg alias for bd mol bond

Add a hidden alias for the bond command:

```bash
bd mol fart mol-polecat-work --wisp
# equivalent to:
bd mol bond mol-polecat-work --wisp
```

## Context
The fart joke: instantiating a proto can produce either:
- A Mol (solid/substantial output)
- A Wisp (gas/ephemeral output)

## Implementation
- Add 'fart' as an alias in the mol subcommand
- No documentation needed (easter egg)
- Maybe a fun message: 'Bonding molecule...' or similar

Low priority, just for fun.


Mail system: JSONL inbox, delivery, tmux injection

Refactor mail system to wrap bd mail commands.

## Status

Current implementation uses JSONL files directly. Now that Beads mail is available (gt-r01 closed), refactor to use bd mail as the backend.

## Implementation

Replace internal/mail/* with thin wrappers around bd CLI:

```go
// Send wraps: bd mail send <to> -s <subject> -m <body>
func (r *Router) Send(msg *Message) error

// List wraps: bd mail inbox --json
func (m *Mailbox) List() ([]*Message, error)

// Get wraps: bd mail read <id> --json
func (m *Mailbox) Get(id string) (*Message, error)

// MarkRead wraps: bd mail ack <id>
func (m *Mailbox) MarkRead(id string) error
```

## Address Translation

GGT addresses → Beads recipients:
- `mayor/` → `mayor`
- `<rig>/refinery` → `<rig>-refinery`
- `<rig>/<polecat>` → `<rig>-<polecat>`

## Tmux Notification

Keep the tmux injection for --notify flag. After bd mail send, optionally inject notification into tmux session.

## Migration

No migration needed - bd mail creates messages as beads issues with type=message. Old JSONL inboxes can be ignored or cleaned up.

## Dependencies

- gt-r01: CLOSED (Beads mail available)
- gt-u1j.4: Tmux wrapper (for notifications)


verify-tests

Run existing tests. Add new tests for new functionality.
Ensure adequate coverage.

go test ./...

Fix any test failures before proceeding.

Depends: implement


Slim down rig root config.json to identity only

Rig root config.json should only contain identity:
- type, version, name, git_url, beads.prefix, created_at
- Remove any behavioral config (move to settings/config.json)
- Update RigConfig type to separate identity from settings
- Ensure loader reads identity from root, settings from settings/