Work assignment mail not received by polecat

When gt spawn sends a work assignment:

1. gt spawn says '✓ Work assignment sent'
2. Polecat runs 'gt mail inbox'
3. Shows '0 messages, 0 unread'

The work assignment mail never arrived at the polecat's inbox.

## Observed in session
- Spawned polecat dementus on gt-th7
- Polecat checked inbox: empty
- Polecat couldn't find issue (separate sync bug)

## Possible causes
- Mail routing issue for polecat addresses
- gt spawn not actually sending mail
- Mail sent to wrong address format

This was likely caused by stale beads in old polecats. With gt-9nf (fresh polecats), polecats now use shared rig beads via redirect file, eliminating sync issues. Mail routing uses town beads correctly.


Molecule composition: Includes directive

Add support for molecule composition via the Includes directive.

## Format
\`\`\`markdown
## Molecule: derived-name
Includes: mol-base-molecule

## Step: additional-step
Additional instructions here.
Needs: step-from-base
\`\`\`

## Implementation
1. Add \`Includes:\` parsing to ParseMoleculeSteps()
2. Resolve included molecule by ID
3. Merge steps from included molecule
4. Allow new steps to depend on included steps
5. Support multiple includes (polymers)

## Files to modify
- internal/beads/molecule.go
- internal/beads/molecule_test.go

## Acceptance
- [ ] Parse Includes directive
- [ ] Resolve and merge included steps
- [ ] Dependencies across molecules work
- [ ] Multiple includes supported
- [ ] Tests cover composition scenarios


Add Deacon heartbeat mechanism

Deacon writes deacon/heartbeat.json on each wake. Go daemon reads it to decide whether to poke. Add heartbeat read/write helpers.


Tmux status line: rig color themes and worker identity display

## Summary

Customize tmux status line for Gas Town workers with:
1. Per-rig configurable color themes
2. Clear worker name and role visibility

## Current Problem

- Only mayor shows in status line (and truncated)
- Can't tell which rig/worker you're looking at
- All sessions look the same

## Proposed Design

### Per-rig colors
```yaml
# In rig config or beads
theme:
  primary: '#ff6600'    # Orange for gastown
  secondary: '#333333'
  accent: '#ffcc00'
```

### Status line format
```
[gastown/Rictus] polecat | gt-70b3 | branch: polecat/Rictus
[beads/emma] crew | working | branch: main
[mayor] coordinator | idle
```

### Components
- Rig name with rig color
- Worker name
- Role (polecat/crew/mayor/witness/refinery)
- Current issue or status
- Branch name

## Configuration

Could use pinned beads for this (see gm-w13, beads-6v2):
- `bd show <rig>-theme` returns theme config
- Stored as pinned bead, always available
- Part of 'config in beads data plane' initiative

Implementation complete. Core features: per-rig color themes, dynamic status line with issue/mail indicators, gt theme/issue commands. Ready for testing.


File locking for concurrent access

Add file locking for concurrent access safety.

## At-Risk Files
- .gastown/swarms.json (or per-swarm state.json)
- .gastown/refinery.json
- polecats/<name>/state.json
- inbox.jsonl files

## Go File Locking
Use syscall.Flock for advisory locking:
```go
type FileLock struct {
    file *os.File
}

func AcquireLock(path string, timeout time.Duration) (*FileLock, error) {
    f, err := os.OpenFile(path+".lock", os.O_CREATE|os.O_RDWR, 0644)
    if err != nil {
        return nil, err
    }
    // Use syscall.Flock with timeout
}

func (l *FileLock) Release() error
```

## Integration Pattern
```go
func (m *Manager) saveState(ref *Refinery) error {
    lock, err := AcquireLock(m.stateFile(), 5*time.Second)
    if err != nil {
        return fmt.Errorf("could not acquire lock: %w", err)
    }
    defer lock.Release()

    // Read-modify-write cycle
}
```

## New Package
internal/filelock/
├── lock.go     # FileLock, AcquireLock
└── lock_test.go

## Apply To
- internal/refinery/manager.go: loadState/saveState
- internal/cmd/swarm.go: SwarmStore
- internal/mail/mailbox.go: Append, rewrite
- internal/polecat/manager.go: state operations

## Timeout Handling
Default 5 second timeout. Return error if lock not acquired.

## Acceptance Criteria
- [ ] Lock files created (.lock extension)
- [ ] Timeout on lock contention
- [ ] All state files protected
- [ ] Locks released on error paths


plugin-run

Execute plugins from ~/gt/plugins/. Check gates, run eligible plugins.


Merge: gt-odvf

branch: polecat/slit
target: main
source_issue: gt-odvf
rig: gastown


gt done: Command doesn't exist but documented in polecat CLAUDE.md

The polecat CLAUDE.md documents 'gt done' as the command to signal work is ready for merge queue, but running it gives 'unknown command'. Either implement the command or update the documentation.


Doctor check: Worker health and stuck detection

Detect and report stuck workers via gt doctor.

## Checks

### WorkerHealthCheck
- List all active workers (polecats with state=working)
- Check last activity timestamp for each
- Flag as potentially stuck if no progress for configurable threshold (default: 30 min)
- Check if Witness is running for the rig
- Verify Witness last heartbeat time

### Stuck Detection Criteria
- Polecat state=working but session not running
- Polecat state=working but output unchanged for threshold
- Witness not responding to health checks
- Multiple polecats in same rig all stuck

## Output

```
[WARN] Workers in rig 'wyvern' may be stuck:
  - Toast: working for 45m, no recent output
  - Capable: working for 52m, session not found
  - Witness: last heartbeat 20m ago

  Suggestions:
  - gt witness status wyvern
  - gt capture wyvern/Toast 50
  - gt stop --rig wyvern (kill all)
```

## Auto-Fix

Cannot auto-fix stuck workers (risk of data loss), but can:
- Restart Witness daemon if crashed
- Send warning mail to Mayor


Molecule format bridge: convert embedded markdown to child issues

## Problem

Two molecule formats exist:
1. **Old (gastown builtin)**: Steps embedded as markdown in Description field, parsed by ParseMoleculeSteps()
2. **New (bd mol)**: Steps as child issues in proper beads DAG

The daemon's InstantiateMolecule() uses the old format. bd mol spawn uses the new format.

## Options

### Option A: Require child issues (new format)
- Update daemon to use bd mol spawn instead of InstantiateMolecule
- Deprecate embedded markdown format
- Pro: One format, simpler
- Con: Breaking change for existing molecules

### Option B: Build a bridge
- In InstantiateMolecule, detect format:
  - If Description has ## Step: markers → parse to child issues
  - If issue has children with template label → use directly
- Convert old format to new format on instantiation
- Pro: Backward compatible
- Con: More complexity

## Recommendation

Option B - build the bridge. On instantiation, convert markdown steps to child issues. This unifies execution while preserving authoring flexibility.


Git wrapper: shell out to git

Wrapper for git operations via subprocess.

## Interface

```go
type Git struct {
    workDir string
}

func NewGit(workDir string) *Git

// Core operations
func (g *Git) Clone(url, dest string) error
func (g *Git) Checkout(ref string) error
func (g *Git) Fetch(remote string) error
func (g *Git) Pull(remote, branch string) error
func (g *Git) Push(remote, branch string, force bool) error

// Commit operations
func (g *Git) Add(paths ...string) error
func (g *Git) Commit(message string) error
func (g *Git) CommitAll(message string) error

// Query operations
func (g *Git) Status() (*GitStatus, error)
func (g *Git) CurrentBranch() (string, error)
func (g *Git) HasUncommittedChanges() (bool, error)
func (g *Git) RemoteURL(remote string) (string, error)

// Merge operations
func (g *Git) Merge(branch string) error
func (g *Git) Rebase(onto string) error
func (g *Git) AbortMerge() error
func (g *Git) AbortRebase() error
```

## Implementation

Shell out to git binary via exec.Command. Parse output where needed (Status, CurrentBranch).

## Error Handling

- Wrap git stderr in error messages
- Detect specific failures (merge conflict, auth failure, not a repo)
- Return structured errors for callers to handle

## Testing

- Use temp directories with real git repos
- Test both success and failure paths


Epic: Refinery Engineer Autonomy

Make Refinery Engineer fully autonomous:

## Goal
Refinery can run indefinitely, processing all polecat work through merge queue, cycling sessions as needed, without human intervention.

## Key Components
1. Role prompting (CLAUDE.md, templates)
2. Handoff mechanism (pinned beads)
3. Context detection (gt prime)
4. Communication protocol (Witness, Deacon)
5. Future: Merge orchestration plugins

## Success Criteria
- Refinery starts, reads handoff, knows what to do
- Processes merges sequentially with conflict resolution
- Cycles sessions cleanly via Deacon
- Communicates results to Witness
- No work left behind


gt crew add: Create crew workspace

Implement 'gt crew add <name> [--rig <rig>]' command:
- Clone repo into <rig>/crew/<name>/
- Create feature branch (optional, or stay on main)
- Register for mail delivery
- Initialize CLAUDE.md with crew worker prompting
- Do NOT register with witness (user-managed)


LocalOutpost: Refactor current polecat spawning

## Overview

Refactor current local polecat spawning to implement the Outpost interface.

## Current State

Polecat spawning is ad-hoc. This task wraps it in LocalOutpost.

## Implementation

```go
type LocalOutpost struct {
    name       string
    maxWorkers int
    tmux       *Tmux
    workers    map[string]*LocalWorker
}

func NewLocalOutpost(config OutpostConfig) *LocalOutpost

func (o *LocalOutpost) Type() OutpostType { return OutpostLocal }

func (o *LocalOutpost) Spawn(issue string, cfg WorkerConfig) (Worker, error) {
    // Create tmux session
    // Start claude in pane
    // Return LocalWorker
}
```

## LocalWorker

```go
type LocalWorker struct {
    id      string
    session string  // tmux session name
    issue   string
    status  WorkerStatus
}

func (w *LocalWorker) Attach() error {
    // tmux attach-session
}
```

## Notes

- This should be a refactor, not new functionality
- Existing polecat code becomes LocalOutpost internals
- Tests should pass before and after

Depends on: gt-9a2.1 (interfaces)


Work on gt-e11: gt mail send priority flag is incompatibl...

Work on gt-e11: gt mail send priority flag is incompatible with bd mail send. Run 'bd show gt-e11' for details.


Test: Alpha to Beta

Sibling communication test


gt molecule seed: create built-in molecules as beads

The molecule infrastructure is complete but built-in molecules (engineer-in-box, quick-fix, research) need to be seeded into the beads database.

## Current State
- `gt molecule list` works but shows 0 molecules
- BuiltinMolecules() in internal/beads/builtin_molecules.go has 3 molecules defined
- No way to create them as beads

## Needed
Add `gt molecule seed` command that:
1. Reads BuiltinMolecules()
2. Creates each as a bead with type: molecule
3. Uses well-known IDs (mol-engineer-in-box, mol-quick-fix, mol-research)
4. Idempotent (skip if already exists)

## Acceptance Criteria
```
gt molecule seed
gt molecule list   # Shows 3 built-in molecules
```

## Parent
gt-4nn: Molecules epic


Merge: gt-rixa

branch: polecat/furiosa
target: main
source_issue: gt-rixa
rig: gastown


tmux notifications: display-message too subtle, use send-keys instead

## Problem

`tmux display-message` notifications are not visible enough - they appear briefly in the status bar and are easy to miss.

## Current Behavior

router.go uses:
```go
r.tmux.DisplayMessageDefault(sessionID, notification)
```

## What Works

Sending echo commands directly to the terminal:
```bash
tmux send-keys -t <session> "echo '📬 NEW MAIL from mayor'" Enter
```

## Proposed Fix

Change notification method to send visible output to the terminal, perhaps with a box/banner:
```
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📬 NEW MAIL from mayor
Subject: <subject>
Run: bd mail inbox
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
```

## Considerations

- This interrupts the terminal output (acceptable for important mail)
- Could check if Claude is mid-response and queue notification
- Or use tmux popup if available

Additional issues:
1. Enter key not sent properly when chained with send-keys
2. Need to debounce and send Enter separately
3. Correct pattern: send text, sleep briefly, then send Enter


Swarm state persistence: manifest + state + events

Upgrade swarm persistence to match PGT pattern.

## Current State
Single .gastown/swarms.json with all swarms.

## Target State (per-swarm)
```
.gastown/swarms/
└── <swarm-id>/
    ├── manifest.json  # Immutable config
    ├── state.json     # Mutable progress
    ├── events.jsonl   # Audit log
    └── report.md      # Generated report
```

## File Schemas

### manifest.json (immutable after creation)
```json
{
  "id": "sw-1",
  "title": "Epic description",
  "epic_id": "gt-abc",
  "rig": "gastown",
  "base_commit": "abc123",
  "integration_branch": "swarm/sw-1",
  "target_branch": "main",
  "workers": ["Toast", "Nux"],
  "tasks": [{"id": "gt-xyz", "title": "..."}],
  "created_at": "2024-01-01T00:00:00Z"
}
```

### state.json (mutable)
```json
{
  "state": "active",
  "task_states": {
    "gt-xyz": {"state": "merged", "assignee": "Toast"}
  },
  "updated_at": "2024-01-01T01:00:00Z",
  "error": null
}
```

### events.jsonl (append-only audit)
```jsonl
{"event": "created", "ts": "...", "data": {...}}
{"event": "task_assigned", "ts": "...", "data": {...}}
{"event": "task_merged", "ts": "...", "data": {...}}
```

## Benefits
- Audit trail via events.jsonl
- Manifest immutability prevents corruption
- Cleaner separation of concerns
- Per-swarm isolation

## Migration
Keep backward compat with swarms.json during transition.

## Files to Modify
- internal/swarm/manager.go: Refactor persistence
- internal/cmd/swarm.go: SwarmStore → directory-based

## Acceptance Criteria
- [ ] Per-swarm directory structure
- [ ] Events logged to JSONL
- [ ] Manifest immutable after creation
- [ ] List command aggregates from directories


Interrupt vs Queue mail semantics

Add priority/delivery semantics to mail messages.

## Semantics

| Type | Delivery | Use Case |
|------|----------|----------|
| Interrupt | tmux send-keys | Lifecycle, URGENT, stuck detection |
| Queue | Create message only | Normal mail, status, heartbeat |

## Implementation

- `bd mail send --interrupt` uses tmux send-keys notification
- Default is queue (agent checks with `gt mail check`)
- Urgent flag on messages for interrupt delivery

## Agent Side

- `gt mail check --quiet` - non-blocking check for queued mail
- `gt mail wait` - block until mail arrives (for idle agents)
- Heartbeats become queued, agent checks at natural breakpoints


Mail system: JSONL inbox, delivery, tmux injection

Refactor mail system to wrap bd mail commands.

## Status

Current implementation uses JSONL files directly. Now that Beads mail is available (gt-r01 closed), refactor to use bd mail as the backend.

## Implementation

Replace internal/mail/* with thin wrappers around bd CLI:

```go
// Send wraps: bd mail send <to> -s <subject> -m <body>
func (r *Router) Send(msg *Message) error

// List wraps: bd mail inbox --json
func (m *Mailbox) List() ([]*Message, error)

// Get wraps: bd mail read <id> --json
func (m *Mailbox) Get(id string) (*Message, error)

// MarkRead wraps: bd mail ack <id>
func (m *Mailbox) MarkRead(id string) error
```

## Address Translation

GGT addresses → Beads recipients:
- `mayor/` → `mayor`
- `<rig>/refinery` → `<rig>-refinery`
- `<rig>/<polecat>` → `<rig>-<polecat>`

## Tmux Notification

Keep the tmux injection for --notify flag. After bd mail send, optionally inject notification into tmux session.

## Migration

No migration needed - bd mail creates messages as beads issues with type=message. Old JSONL inboxes can be ignored or cleaned up.

## Dependencies

- gt-r01: CLOSED (Beads mail available)
- gt-u1j.4: Tmux wrapper (for notifications)


Merge: gt-a95

branch: polecat/Ace
target: main
source_issue: gt-a95
rig: gastown


MR: gt-svi.1 (polecat/Furiosa)

branch: polecat/Furiosa
target: main
source_issue: gt-svi.1


Phase 4: Polish and observability

Production readiness.

## Commands
- gt patrol status - Show patrol state for all agents
- gt patrol history - Recent patrol activity

## Observability
- Metrics collection
- Alert thresholds
- Dashboard (optional)

## Tuning
- Cooldown optimization
- Wake SLA verification
- Error threshold tuning

Depends: Phase 3


Update templates for Propulsion Principle

Overhaul agent prompts to embody the Universal Gas Town Propulsion Principle:

> If you find something on your hook, YOU RUN IT.

Templates to update:
- [ ] deacon.md.tmpl - Check hook first, no decision logic
- [ ] polecat.md.tmpl - Propulsion startup, follow molecule
- [ ] witness.md.tmpl - Sling wisps when spawning agents
- [ ] refinery.md.tmpl - Accept slung epics

Key changes:
1. Remove 'should I run this?' decision points
2. Add 'check your hook' as step 1 of startup
3. Make molecule-following the default mode
4. Simplify - agents don't think, they execute


Polecat mood command and status line display

CLI and status line support for polecat mood.

## CLI Command
```
gt polecat mood <name> <emoji>   # Set mood
gt polecat mood <name>           # Get mood
```

Sets GT_MOOD environment variable in the polecat's tmux session.

## Status Line Integration
Update runWorkerStatusLine() to read mood:
```go
mood, _ := t.GetEnvironment(session, "GT_MOOD")
if mood != "" {
    icon = mood  // Use mood emoji instead of default
} else {
    icon = AgentTypeIcons[AgentPolecat]  // Fallback to 😺
}
```

## Storage
Mood stored in tmux session environment (ephemeral, per-session).
No persistence needed - mood is reassessed each patrol cycle.

Depends on: gt-u818 (plugin system)


Default crew name should be something better than 'main'

When creating a new rig, the default crew worker name is 'main'. This is confusing since:

1. 'main' is also the git branch name
2. It doesn't convey that this is the user's personal workspace
3. Crew names should feel more personal/distinct

Consider alternatives like:
- 'home' - the user's home base
- 'desk' - their personal desk
- 'joe/max/etc' - actual name-based defaults
- Let user pick during rig init


Merge: gt-g44u.3

branch: polecat/Ace
target: main
source_issue: gt-g44u.3
rig: gastown


Add molecule to update local go binary on push to main

When pushing to main branch, automatically rebuild and install the gt binary on the local machine so changes are immediately available.


mol-code-review: Self-improving code review molecule

Create a code review molecule that enables Gas Town to self-improve through automated PR review. Flywheel: review generates quality checks, discovered issues, pattern learning.


Post-work discovery: AI analysis finds follow-on issues

AI analyzes completed work to discover: bugs, punted work, follow-on tasks.

**From VC**: Supervisor.AnalyzeResult() with iterative refinement. ~300 lines.

**Gas Town implementation**: Post-work hook in molecule:
```yaml
post_work:
  discover:
    - bugs
    - punted_items
    - follow_on_work
  file_as: beads
```

Polecat output gets analyzed by AI, discovered work becomes beads issues.

**Value**: Nothing gets forgotten. VC found ~25% more issues with refinement.

**Key**: Use semantic deduplication (gt-xxx) to avoid pollution.


Mail system: message types and threading

GGT mail system needs message types and threading like PGT.

## 1. Message Types
Add to internal/mail/types.go:
```go
type MessageType string
const (
    TypeTask         MessageType = "task"         // Required processing
    TypeScavenge     MessageType = "scavenge"     // Optional first-come work
    TypeNotification MessageType = "notification" // Informational
    TypeReply        MessageType = "reply"        // Response to message
)

// Update Message struct
type Message struct {
    // existing fields...
    Type     MessageType `json:"type"`
    ThreadID string      `json:"thread_id,omitempty"`
    ReplyTo  string      `json:"reply_to,omitempty"`
}
```

## 2. Priority Levels
Expand from 2 to 4:
```go
type Priority string
const (
    PriorityLow    Priority = "low"
    PriorityNormal Priority = "normal"
    PriorityHigh   Priority = "high"
    PriorityUrgent Priority = "urgent"
)
```

## 3. CLI Updates
internal/cmd/mail.go:
- Add --type flag to send: `gt mail send ... --type task`
- Add --reply-to flag: `gt mail send ... --reply-to <msg-id>`
- Add thread command: `gt mail thread <thread-id>`

## 4. Threading Logic
NewMessage() should auto-generate thread_id if not a reply.
Reply messages inherit thread_id from original.

## Files to Modify
- internal/mail/types.go: Add types, expand Priority
- internal/mail/mailbox.go: Thread filtering
- internal/cmd/mail.go: CLI flags and thread command

## PGT Reference
gastown-py/src/gastown/mail/message.py

## Acceptance Criteria
- [ ] Messages have type field (default: notification)
- [ ] 4 priority levels supported
- [ ] Reply creates thread with shared thread_id
- [ ] gt mail thread <id> shows conversation


gt nudge should accept partial/fuzzy session names

Currently gt nudge requires the exact tmux session name (e.g., gt-gastown-crew-max). Should be more forgiving:

1. Accept partial matches when unambiguous (e.g., 'max' → gt-gastown-crew-max)
2. Accept shorthand like 'gastown/max' or 'crew/max'
3. Show helpful error with suggestions when ambiguous

Examples that should work:
- gt nudge max '...' → matches gt-gastown-crew-max
- gt nudge gastown/max '...' → matches gt-gastown-crew-max
- gt nudge beads-dave '...' → matches gt-beads-crew-dave


Merge: gt-g44u.2

branch: polecat/Doof
target: main
source_issue: gt-g44u.2
rig: gastown


Create DEACON.md role context

Create ~/gt/DEACON.md with the Deacon's role context, wake cycle instructions, and command reference. Model after existing CLAUDE.md for Mayor.


Phase 2.1: gt spawn --molecule bonds in ephemeral

Make gt spawn molecule-aware with ephemeral bonding.

## New Flag

```bash
gt spawn --issue gt-xxx --molecule mol-polecat-work
```

## Behavior

1. Create polecat with fresh worktree (existing)
2. Bond molecule in ephemeral: `bd mol bond mol-polecat-work --ephemeral`
3. Link molecule root to source issue
4. Include molecule context in work assignment mail
5. Start session

## Work Assignment Mail

```
Subject: Work Assignment: Fix lifecycle bug [MOLECULE]

You are working on gt-rixa as part of molecule mol-polecat-work.

Molecule instance: eph-abc123
Current step: read-assignment (1/8)

Follow the molecule workflow. When complete, generate summary and squash.
```


Deacon marching orders: pinned bead with rounds molecule

Create a pinned bead that defines the Deacon's rounds molecule - its "kernel".

## Concept

Like `gt prime` gives agents their context, a pinned bead gives the Deacon
its operating instructions. This bead defines:

1. The rounds molecule (steps to execute each wake)
2. Registered plugins (scheduled, event-triggered)
3. Configuration (timeouts, thresholds, escalation rules)

## Pinned Bead Structure

```yaml
# gt-deacon-kernel (pinned)
title: "Deacon Kernel Configuration"
type: policy
pinned: true

molecule: mol-deacon-rounds
  steps:
    - session-check: "Check context budget, cycle if needed"
    - health-scan: "Check Mayor, Witnesses, Refineries, Crew"
    - lifecycle: "Process pending lifecycle requests"
    - plugins: "Run due scheduled plugins"
    - events: "Process timer callbacks, event subscriptions"
    - complete: "Update heartbeat, return to wait"

plugins:
  scheduled:
    - name: beads-hygiene
      schedule: "0 2 * * *"  # 2 AM daily
    - name: branch-cleanup
      schedule: "0 4 * * 0"  # 4 AM Sundays

  event_triggers:
    - event: "issue.created"
      plugin: work-oracle
    - event: "mr.submitted"
      plugin: review-oracle

config:
  session_cycle_threshold_turns: 50
  session_cycle_threshold_hours: 4
  health_scan_timeout_seconds: 60
  plugin_timeout_minutes: 30
  escalation_after_failures: 3
```

## Reading Marching Orders

On wake, Deacon:
1. `bd show --pinned` to find the kernel bead
2. Parse molecule steps
3. Execute in order

## Updating the Kernel

To change Deacon behavior:
1. `bd update gt-deacon-kernel` with new config
2. Next wake cycle picks up changes
3. No code changes required

## Bootstrap

If no pinned bead exists, Deacon uses hardcoded defaults from DEACON.md.
First installation creates the pinned bead.


gt spawn: Enter key needs debounce delay after paste

## Problem

When spawning polecats via `gt spawn`, instructions are pasted into tmux but workers often sit idle at prompt because the Enter key arrives before the paste is fully processed.

## Observed Behavior

- Instructions pasted via tmux send-keys
- Enter key sent immediately after
- Worker session shows prompt with no input (paste not submitted)
- Requires manual intervention to nudge workers

## Expected Behavior

- Paste completes fully
- Enter key submits the pasted instructions
- Worker begins executing immediately

## Root Cause

Likely a race condition between paste buffer processing and keypress handling. Need either:
1. Debounce delay before sending Enter
2. Longer delay (Tmax) to ensure paste completes
3. Alternative submission mechanism

## Impact

- Swarm of 10 workers had multiple stalls at startup
- Required manual tmux send-keys to unstick them
- Defeats purpose of automated spawning

## References

- Observed during Mad Max swarm (Dec 18, 2025)
- Affects gt spawn command in internal/cmd/spawn.go


orphan-check

Find abandoned work. Check for in_progress issues with no active agent.


Layered context onboarding pattern

Pattern from handoff discussion:

## Pattern: Layered Context Onboarding

Town CLAUDE.md (user/org) -> Rig CLAUDE.md (project) -> Role priming

## Ultra-compressed HOP for workers (no reveal)

- Permanent record: All work tracked. Outcomes matter.
- Quality gates: Molecule steps exist for a reason.
- Attribution: Completions build your track record.
- Handoff clean: Leave state any worker can continue.

## Recommendation

Create Town @AGENTS.md for shared worker context that all workers see.
This provides common behavioral guidance without revealing full HOP context.


Slim down rig root config.json to identity only

Rig root config.json should only contain identity:
- type, version, name, git_url, beads.prefix, created_at
- Remove any behavioral config (move to settings/config.json)
- Update RigConfig type to separate identity from settings
- Ensure loader reads identity from root, settings from settings/


Go scaffolding: cmd/gt, go.mod, Cobra setup

Set up Go project structure with CLI framework.

**Stack:**
- Cobra for command/flag handling
- Lipgloss for styled terminal output

**Deliverables:**
- cmd/gt/main.go with Cobra root command
- Basic subcommands: version, help
- Lipgloss styles for status output (success, warning, error)
- go.mod with dependencies


Configuration in Beads: use pinned beads for rig/agent config

## Summary

Move configuration from JSON files into Beads data plane using pinned beads.

## Motivation

- Config becomes versionable and syncable like issues
- Agents can read config via `bd show`
- Unified data model for everything
- Supports the 'Beads as Universal Data Plane' vision (gt-aqm)

## Config Types to Migrate

### Rig-level (pinned per rig)
- Theme/colors for tmux status line
- Default branch naming conventions
- Merge queue settings
- Witness thresholds

### Agent-level (pinned per role)
- Handoffs (already planned - gt-cu7r)
- Agent preferences
- Current focus/context

### Town-level (pinned at town root)
- Cross-rig settings
- Federation config
- Global themes

## Implementation

1. Implement StatusPinned (beads-6v2) ✓ in progress
2. Create config pinned beads on rig init
3. Add `bd config get/set` commands that read/write pinned beads
4. Migrate existing config.json fields

## Naming Convention

```
<prefix>-cfg-<scope>
gt-cfg-theme      # gastown theme
bd-cfg-merge      # beads merge settings
gm-cfg-town       # town-level config
```

## Dependencies

- beads-6v2: Add StatusPinned to beads schema
- gm-w13: Pinned Beads epic


Work on gt-role-template: Refine witness/CLAUDE.md role t...

Work on gt-role-template: Refine witness/CLAUDE.md role template. See issue for details. Run 'bd show gt-role-template' to see the full issue.


Merge: gt-5af.5

branch: polecat/Scabrous
target: main
source_issue: gt-5af.5
rig: gastown


Refactor: Extract common manager creation boilerplate

Five nearly identical functions exist for creating managers:
- getPolecatManager (polecat.go:241)
- getSessionManager (session.go:183)
- getCrewManager (crew_helpers.go:44)
- getRefineryManager (refinery.go:116)
- getWitnessManager (witness.go:102)

All follow the same pattern: find workspace, load config, get rig, create manager. Should extract to a common helper that takes a factory function.


Witness pre-kill verification protocol

Add pre-kill verification protocol to Witness CLAUDE.md template.

## Protocol for Witness Prompting

```markdown
## Pre-Kill Verification Protocol

Before killing any worker session, verify workspace is clean.

### Verification Steps

When a worker signals done:

1. **Capture worker state**:
```bash
town capture <polecat> "git status && git stash list && bd sync --status"
```

2. **Assess the output** (use your judgment):
- Is working tree clean?
- Is stash list empty?
- Is beads synced?

3. **Decision**:
- **CLEAN**: Proceed to kill session
- **DIRTY**: Send nudge with specific issues

### Nudge Templates

**Uncommitted Changes**:
```
town inject <polecat> "WITNESS CHECK: Uncommitted changes found. Please commit or discard: <files>. Signal done when clean."
```

**Beads Not Synced**:
```
town inject <polecat> "WITNESS CHECK: Beads not synced. Run 'bd sync' then commit. Signal done when complete."
```

### Kill Sequence

Only after verification passes:
```bash
town kill <polecat>
town sleep <polecat>
```

### Escalation

If worker fails verification 3+ times:
```bash
town mail send mayor/ -s "Escalation: <polecat> stuck" -m "Cannot complete cleanup after 3 attempts. Issues: <list>."
```
```

## Implementation

Add to WITNESS_CLAUDE.md template.


Phase 2: Quiescent agents (Witness, Refinery)

Enable Witness and Refinery to sleep until triggered.

## Scope
- Wake triggers: gt spawn, MR submit, mail, Deacon ping
- Wake SLA: <1 minute
- mol-witness-patrol and mol-refinery-patrol definitions
- Quiescent entry/exit protocol

## Implementation
- Kill tmux session on quiescent entry
- Preserve sandbox (worktree, state files)
- Restart session on wake trigger
- Agent checks pinned, spawns default patrol if naked

Depends: Phase 1 complete


Create mol-install-go-binary molecule

Create a single-step molecule for building and installing the gt binary.

## Molecule Definition
\`\`\`markdown
## Molecule: install-go-binary
Single step to rebuild and install the gt binary after code changes.

## Step: install
Build and install the gt binary locally.

Run from the rig directory:
\`\`\`
go build -o gt ./cmd/gt
go install ./cmd/gt
\`\`\`

Verify the installed binary is updated:
\`\`\`
which gt
gt --version  # if we have version command
\`\`\`
\`\`\`

## Implementation
1. Add to builtin_molecules.go
2. Update SeedBuiltinMolecules to include it
3. Run gt molecule seed

## Acceptance
- [ ] mol-install-go-binary exists in beads
- [ ] Can be instantiated standalone
- [ ] Can be included by other molecules


Update prompts.md: Engineer role and templates

Update docs/prompts.md with Engineer role:

1. Role Prompts table: Change Refinery to Engineer
2. Add Engineer-specific prompts:
   - Session restart request template
   - Subtask filing template
   - Handoff mail template
3. Update refinery.md template name to engineer.md
4. Ensure consistency with architecture.md


Implement gt harness create command

Add scaffolding command to create a new harness:
- gt harness create [path]
- Creates config/, mayor/, .beads/redirect (optional)
- Optionally initializes git
- Generates CLAUDE.md with Mayor role
- Could also offer a template repo alternative


Outpost CLI commands: gt outpost list/status/add

## Overview

CLI commands for managing outposts.

## Commands

```bash
# List configured outposts
gt outpost list
NAME            TYPE       WORKERS   STATUS
local           local      2/4       healthy
gce-burst       ssh        0/8       healthy
cloudrun-burst  cloudrun   0/20      healthy

# Detailed status
gt outpost status [name]
Outpost: cloudrun-burst
Type: cloudrun
Project: my-gcp-project
Region: us-central1
Service: gastown-worker
Active Workers: 3/20
Cost (today): $0.42
Status: healthy

# Add new outpost interactively
gt outpost add
? Outpost type: [local/ssh/cloudrun]
> cloudrun
? Name: cloudrun-burst
? GCP Project: my-gcp-project
...

# Add via flags
gt outpost add cloudrun --name burst --project my-proj --region us-central1

# Remove outpost
gt outpost remove <name>

# Test connectivity
gt outpost ping <name>
```

## Files

- `cmd/gt/outpost.go` - Cobra command group
- `cmd/gt/outpost_list.go`
- `cmd/gt/outpost_status.go`
- `cmd/gt/outpost_add.go`

Depends on: gt-9a2.3 (config/manager)


Witness daemon: heartbeat loop, spawn ephemeral agent

Background daemon for agent lifecycle and monitoring.

## Core Responsibilities

1. **Heartbeat monitoring**: Check agent health periodically
2. **Session lifecycle**: Restart agents after handoff (Witness Protection)
3. **Polecat monitoring**: Track worker progress, nudging
4. **Escalation**: Report failures to Mayor

## Session Lifecycle (Witness Protection)

The daemon enables autonomous long-running operation by cycling agent sessions:

```go
type SessionLifecycle struct {
    AgentType string  // "witness", "refinery"
    StatePath string  // path to state.json
}

func (d *Daemon) monitorSessionLifecycle(agent SessionLifecycle) {
    // 1. Detect session exit
    // 2. Check state.json for requesting_cycle: true
    // 3. If cycle requested: start new session, clear flag
    // 4. If unexpected exit: escalate to Mayor
}
```

See architecture.md Key Decision #12: Agent Session Lifecycle.

## Interface

```go
type Daemon struct {
    rig      *Rig
    polecats *PolecatManager
    sessions *SessionManager
    config   DaemonConfig
}

type DaemonConfig struct {
    HeartbeatInterval time.Duration  // default: 30s
    NudgeThreshold    int            // nudges before escalation
    MaxWorkers        int            // from rig config
}

func NewDaemon(rig *Rig) *Daemon
func (d *Daemon) Start() error
func (d *Daemon) Stop() error

// Lifecycle
func (d *Daemon) CycleSession(agentType string) error
func (d *Daemon) SpawnWorker(issueID string) error
func (d *Daemon) ShutdownWorker(polecat string) error
```

## Heartbeat Loop

Every HeartbeatInterval:
1. Check Witness session (restart if cycle requested)
2. Check Refinery session (restart if cycle requested)
3. For each active polecat: assess progress, nudge if stuck
4. Query `bd ready` for new work, spawn up to max_workers


Track merge requests as beads (type=merge-request)

Currently MRs are tracked in .gastown/refinery.json. For HOP audit trail and entity CV tracking, merge requests should be Beads entries with type=merge-request. This enables:
- Full audit trail of what was merged, when, by whom
- Entity chain contributions (who validated what)
- Cross-rig visibility of merge activity

The refinery would create an MR bead when work enters the queue, update status as it progresses (open → in_progress → merged/rejected).

Part of Beads-as-data-plane vision from HOP.


bd pin command fails: invalid field for update: pinned

In beads v0.32.0, `bd pin <id>` fails with 'invalid field for update: pinned'. The pinned field exists in the schema but update logic doesn't handle it.

Repro:
```
bd create 'test issue'
bd pin <id>
# Error: invalid field for update: pinned
```

Expected: Issue should be pinned.

This blocks gt mail send --pinned from working.


Crew worker CLAUDE.md prompting

Create CLAUDE.md template for crew workers:
- Explain crew worker role (overseer's personal workspace)
- Include mail-to-self handoff instructions
- Document gt crew refresh for context cycling
- Explain no witness monitoring (user-managed)
- Include beads usage if BEADS_DIR configured


Cross-project dependency workflow (Gas Town side)

Gas Town integration for cross-project dependencies.

## Components
- gt-zniu: gt park command (park molecule on external dep)
- gt-in3x: gt spawn --continue (resume parked molecule)
- gt-5uf3: Patrol auto-resume (future)

## Design Doc
See: docs/cross-project-deps.md

## Depends on Beads
- bd-h807: Cross-project dependency support (epic)

## Launch Plan
Phase 1 (launch): gt park + gt spawn --continue (manual resume)
Phase 2 (later): Patrol auto-resume


Deacon keepalive: quiet daemon during rounds

Replace tmux-poke interrupts with a keepalive file the daemon respects.

## Problem

Current daemon pokes Deacon via tmux SendKeys every ~5 minutes if heartbeat
is stale. This can INTERRUPT the Deacon mid-work, especially during long
plugin execution or health remediation.

## Solution

Deacon writes a keepalive file at start of rounds:
```json
{
  "timestamp": "2025-12-20T15:30:00Z",
  "expected_duration_minutes": 10,
  "action": "executing mol-deacon-rounds"
}
```

Daemon reads this and backs off:
- If keepalive is fresh AND within expected_duration: skip poke
- If keepalive is stale OR past expected_duration: poke (fallback)

## Files

- `{townRoot}/deacon/keepalive.json` - Written by Deacon
- Daemon already reads `{townRoot}/deacon/heartbeat.json` - similar pattern

## Deacon Behavior

1. Start of rounds: write keepalive with expected duration
2. End of rounds: write heartbeat (existing), clear/update keepalive
3. If rounds take longer than expected: Deacon gets one poke, squelches it

## Daemon Changes

Modify `pokeDeacon()` in daemon.go:
1. Check keepalive.json freshness and expected_duration
2. If within bounds: skip poke, log "Deacon active"
3. If past bounds: poke as fallback

## Worst Case

Deacon crashes mid-rounds without clearing keepalive:
- Daemon waits until expected_duration expires
- Then pokes, triggering respawn loop
- Max delay: expected_duration (configurable, default 10-15 min)

## Configuration

In pinned kernel bead:
```yaml
config:
  rounds_expected_duration_minutes: 10
```


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue ({{issue}}) and understand the requirements.
Identify any blockers or missing information.


Work on ga-lzh: Add gt witness attach command. Allow atta...

Work on ga-lzh: Add gt witness attach command. Allow attaching to witness session for a rig, similar to gt mayor attach. When done, submit MR (not PR) to integration branch for Refinery.


Deacon rounds molecule: the kernel execution loop

Define and implement mol-deacon-rounds - the molecule the Deacon executes each wake.

## Molecule Definition

```markdown
# mol-deacon-rounds

The Deacon kernel - executed on every wake cycle.

## Step: session-check
Check context budget. If low, cycle to fresh session.
Needs: (none - always runs first)

## Step: health-scan
Check health of all monitored agents:
- Mayor (gt-mayor session)
- Witnesses (gt-*-witness sessions)
- Refineries (gt-*-refinery sessions)
- Crew (gt-*-* sessions, lifecycle only)

Remediate unhealthy agents:
- Restart dead sessions
- Nudge stuck agents
- Escalate if remediation fails

Needs: session-check

## Step: lifecycle
Process pending lifecycle requests from mail:
- LIFECYCLE: <identity> requesting cycle
- LIFECYCLE: <identity> requesting restart
- LIFECYCLE: <identity> requesting shutdown

Needs: health-scan

## Step: plugins
Run due plugins:
1. Check scheduled plugins (cron-like)
2. Check event-triggered plugins (from mail events)
3. Check human-requested plugins (from mail)
4. Execute each, record outcomes

Needs: lifecycle

## Step: events
Process timer and event callbacks:
- TIMER: <identity> wake at <time>
- EVENT: <type> <payload>

Notify relevant agents or trigger actions.

Needs: plugins

## Step: complete
Finalize the cycle:
1. Update heartbeat.json
2. Clear/update keepalive.json
3. Log summary
4. Return to prompt (wait for next wake)

Needs: events
```

## Execution

The Deacon reads this molecule from its pinned bead and executes steps in order.
Each step:
1. Announces "Starting <step>"
2. Performs the step logic
3. Records outcome
4. Proceeds to next step

## Step Plugins

Each step can have inline plugins (additional attention):
```yaml
step: health-scan
  plugins:
    - advanced-diagnostics  # Run if basic scan finds issues
```

## Relation to bd mol

Uses the same molecule format as bd mol for polecats.
Deacon molecule is special: it's the kernel, not work.


gt witness: Witness management commands

Add 'gt witness' command group for witness lifecycle management.

Subcommands:
- gt witness start [rig] - Start witness for a rig
- gt witness stop [rig] - Stop witness
- gt witness status [rig] - Show witness status
- gt witness attach [rig] - Attach to witness session

Witness monitors polecats and handles:
- Idle detection and cleanup
- Session health checks
- Nudging stuck agents


Merge: gt-5af.2

branch: polecat/Doof
target: main
source_issue: gt-5af.2
rig: gastown


Outpost error handling: Retry logic and resilience

## Overview

Error handling and retry logic for outpost operations.

## Error Types

```go
var (
    ErrOutpostUnreachable = errors.New("outpost unreachable")
    ErrWorkerSpawnFailed  = errors.New("worker spawn failed")
    ErrWorkerTimeout      = errors.New("worker timed out")
    ErrCostCapExceeded    = errors.New("cost cap exceeded")
    ErrAllOutpostsBusy    = errors.New("all outposts at capacity")
)
```

## Retry Policy

```go
type RetryPolicy struct {
    MaxAttempts     int
    InitialBackoff  time.Duration
    MaxBackoff      time.Duration
    BackoffFactor   float64
    RetryableErrors []error
}

func DefaultRetryPolicy() *RetryPolicy {
    return &RetryPolicy{
        MaxAttempts:    3,
        InitialBackoff: 1 * time.Second,
        MaxBackoff:     30 * time.Second,
        BackoffFactor:  2.0,
        RetryableErrors: []error{
            ErrOutpostUnreachable,
            ErrWorkerSpawnFailed,
        },
    }
}
```

## Retry Implementation

```go
func (m *OutpostManager) SpawnWithRetry(issue string, cfg WorkerConfig) (Worker, error) {
    var lastErr error
    backoff := m.retryPolicy.InitialBackoff

    for attempt := 0; attempt < m.retryPolicy.MaxAttempts; attempt++ {
        outpost := m.policy.SelectOutpost(issue, m.outposts)
        if outpost == nil {
            return nil, ErrAllOutpostsBusy
        }

        worker, err := outpost.Spawn(issue, cfg)
        if err == nil {
            return worker, nil
        }

        if !m.isRetryable(err) {
            return nil, err
        }

        lastErr = err
        time.Sleep(backoff)
        backoff = min(backoff * m.retryPolicy.BackoffFactor, m.retryPolicy.MaxBackoff)
    }

    return nil, fmt.Errorf("spawn failed after %d attempts: %w",
        m.retryPolicy.MaxAttempts, lastErr)
}
```

## Outpost Health Tracking

```go
type OutpostHealth struct {
    LastPing      time.Time
    LastError     error
    FailureCount  int
    CircuitBreaker bool  // If true, skip this outpost
}

func (m *OutpostManager) updateHealth(name string, err error) {
    // Track failures, open circuit breaker after N failures
    // Auto-reset after successful ping
}
```

## Config

```yaml
policy:
  retry:
    max_attempts: 3
    initial_backoff: 1s
    max_backoff: 30s

  circuit_breaker:
    failure_threshold: 5
    reset_timeout: 1m
```

## Files

- `internal/outpost/retry.go`
- `internal/outpost/health.go`

## Dependencies

Depends on: gt-9a2.3 (OutpostManager)
Can be done after basic outpost implementations work.


detectSender() doesn't recognize crew workers

## Problem

detectSender() in internal/cmd/mail.go only checks for /polecats/ directories. Crew workers in /crew/<name>/ fall through to the default 'mayor/', so:
- gt mail inbox shows mayor's inbox instead of the crew worker's
- gt mail send sets the wrong From address

## Fix

Add crew worker detection before the /polecats/ check:

if strings.Contains(cwd, "/crew/") {
    parts := strings.Split(cwd, "/crew/")
    ...
    return fmt.Sprintf("%s/crew/%s", rigName, crewMember)
}

## Affected
- Any crew worker running gt mail inbox without explicit address
- Crew worker handoffs (wrong sender)


Define constants for magic strings

Several magic strings are hardcoded throughout the codebase:
- "mayor" appears in 20+ places as a path component
- "main" branch name appears in 20+ places
- "beads-sync" branch name in multiple files
- "rigs.json" filename

These should be constants in a central location for maintainability.


gt session capture: Support positional line count argument

Make 'gt session capture gastown/Toast 50' work.

Currently requires: gt session capture gastown/Toast -n 50
Should also accept: gt session capture gastown/Toast 50

Agent UX principle: commands should work the way agents guess they work.


Update gt doctor to check new config locations

Doctor should validate new structure:
- Check mayor/config.json exists and is valid
- Check settings/ exists for each rig
- Warn if old .gastown/ files still exist
- Offer --fix to migrate old locations to new


Adaptive backoff for daemon heartbeat

Track agent responsiveness and adjust heartbeat frequency.

## Per-Agent State

```go
type AgentBackoff struct {
    BaseInterval    time.Duration  // 60s default
    CurrentInterval time.Duration  // grows when busy
    MaxInterval     time.Duration  // 10min cap
    ConsecutiveMiss int            // pokes with no response
}
```

## Strategy Options

- **Fixed**: Always 60s (current, simple)
- **Geometric**: 60s → 90s → 135s → 202s (factor 1.5)
- **Exponential**: 60s → 120s → 240s (factor 2, aggressive)

## Recovery

When agent responds (runs a command):
- Reset ConsecutiveMiss to 0
- Return to BaseInterval immediately

## Benefits

- Reduces noise for busy agents
- Saves resources during quiet periods
- Still catches stuck agents (max interval cap)


gt mq status: detailed MR view

Implement 'gt mq status <id>' command for detailed MR view.

Display:
- All MR fields (branch, target, source_issue, worker, rig)
- Current status with timestamps
- Dependencies (what it's waiting on)
- Blockers (what's waiting on it)
- Processing history (attempts, failures)

Under the hood: bd show <id> with MR-specific formatting.

Reference: docs/merge-queue-design.md#command-details


gt mail inbox doesn't find crew worker mail - identity mismatch

## Problem

Crew workers don't see their handoff messages when running `gt mail inbox` from their working directory.

## Root Cause

gt derives identity from cwd path, but crew workers have a different path structure:
- **cwd**: `/Users/stevey/gt/beads/crew/dave`
- **gt derives**: `beads/crew/dave` (wrong)
- **should be**: `beads/dave` (crew workers use `rig/name` format)

Messages sent to `beads/dave` don't show up because gt is looking for `beads/crew/dave`.

## Workaround

Use explicit identity flag:
```bash
gt mail inbox --identity "beads/dave"
```

## Fix

Identity detection in gt should handle crew/ subdirectory:
- Path `<rig>/crew/<name>` should derive identity as `<rig>/<name>`
- This matches how polecats work: `<rig>/polecats/<name>` → `<rig>/<name>`

## Affected

All crew workers in all rigs.


Merge queue: per-rig queue management

Per-rig merge queue for coordinating polecat work.

## Concept

When polecats complete work, they submit to the merge queue. The Refinery processes the queue, merging work to main in order.

## Data Model

```go
type MergeRequest struct {
    ID        string    `json:"id"`
    Polecat   string    `json:"polecat"`
    Branch    string    `json:"branch"`
    Issue     string    `json:"issue,omitempty"`
    Status    MRStatus  `json:"status"`
    CreatedAt time.Time `json:"created_at"`
    UpdatedAt time.Time `json:"updated_at"`
}

type MRStatus string
const (
    MRPending   MRStatus = "pending"
    MRReviewing MRStatus = "reviewing"
    MRMerged    MRStatus = "merged"
    MRRejected  MRStatus = "rejected"
)
```

## Interface

```go
type MergeQueue struct {
    rig  *Rig
    path string  // <rig>/refinery/queue.jsonl
}

func NewMergeQueue(rig *Rig) *MergeQueue

// Queue operations
func (mq *MergeQueue) Submit(polecat, branch string, issue string) (*MergeRequest, error)
func (mq *MergeQueue) List() ([]*MergeRequest, error)
func (mq *MergeQueue) Next() (*MergeRequest, error)  // oldest pending
func (mq *MergeQueue) Get(id string) (*MergeRequest, error)

// Status updates
func (mq *MergeQueue) SetStatus(id string, status MRStatus) error
func (mq *MergeQueue) MarkMerged(id string) error
func (mq *MergeQueue) MarkRejected(id, reason string) error
```

## Queue Storage

JSONL file at `<rig>/refinery/queue.jsonl`. FIFO ordering.

## Git Coordination

Refinery processes queue:
1. Fetch polecat branch
2. Attempt merge to main
3. Run tests (if configured)
4. Push to origin
5. Update queue status

## Conflict Handling

If merge fails:
- Mark MR as rejected
- Notify polecat to rebase


gt crew status: Show workspace status

Implement 'gt crew status [<name>]' command:
- Show session state (running/stopped)
- Show git status (branch, uncommitted changes, unpushed)
- Show last commit info
- Show mail inbox status (unread count)
- If no name given, show all crew workers


submit-merge

Submit to merge queue. Create branch if needed.
Verify CI passes.

gt done  # Signal work ready for merge queue

If there are CI failures, fix them before proceeding.

Depends: rebase-main


bd create should support molecule type

gt molecule commands expect type=molecule but bd validates against bug|feature|task|epic|chore|merge-request only


CLI: doctor diagnostics and auto-repair

GGT completely lacks the doctor command which is critical for debugging.

Required Commands:
- gt doctor [<rig>] - Run diagnostic checks
- gt doctor --fix - Auto-repair common issues

Checks to Implement:
Workspace Level: Config validity, Mayor mailbox, Rig registry
Rig Level: Git state, clone health, witness/refinery presence, beads sync
Swarm Level: Stuck detection, zombie sessions, heartbeat health

PGT Reference: gastown-py/src/gastown/cli/dashboard_cmd.py


Witness role template + CLAUDE.md

Create the Witness agent's role context:

1. internal/templates/roles/witness.md.tmpl
   - Witness responsibilities (polecat lifecycle)
   - Core loop description
   - Commands available (gt polecats, bd ready, etc)
   - Escalation protocol

2. Generate CLAUDE.md for witness/ directories
   - Context about the rig
   - Mail address: <rig>/witness
   - Startup protocol (gt prime, check inbox)

The Witness is the per-rig 'pit boss' - NOT a global coordinator. It manages polecats for ONE rig only.


Polecats should not push branches to remote

## Current Behavior

Polecats push their branches to origin (e.g., `polecat/furiosa`), which pollutes the remote with many short-lived branches.

## Desired Behavior

Polecats should only commit locally. The Refinery handles all remote pushes:
1. Polecat works on local `polecat/<name>` branch
2. Polecat signals done (state → idle)
3. Refinery pulls from local polecat branch
4. Refinery runs tests, merges to main
5. Refinery pushes main to remote
6. If PR review needed, Refinery creates the PR

## Benefits

- Clean remote (no branch pollution)
- Clear responsibility (Refinery is the quality gate)
- Simpler cleanup (local branches deleted with worktree)
- Less noise in GitHub UI

## Trade-offs

- If polecat crashes before Refinery merges, code is lost locally
- But beads issue remains open, another polecat can redo the work
- This is acceptable for ephemeral workers

## Implementation

In polecat CLAUDE.md or landing protocol:
- Remove `git push origin HEAD` from workflow
- Replace with just `git commit` + signal done
- Refinery handles the rest


gt mq list: show queue with status/priority/age

Implement 'gt mq list' command to display the merge queue.

Output format:
ID          STATUS       PRIORITY  BRANCH                    WORKER  AGE
gt-mr-001   ready        P0        polecat/Nux/gt-xyz        Nux     5m
gt-mr-002   in_progress  P1        polecat/Toast/gt-abc      Toast   12m
gt-mr-003   blocked      P1        polecat/Capable/gt-def    Capable 8m
            (waiting on gt-mr-001)

Options:
- --ready: show only ready-to-merge (no blockers, not in progress)
- --status STATUS: filter by status
- --worker WORKER: filter by worker
- --epic EPIC: show MRs targeting integration/EPIC

Under the hood: bd list --type=merge-request with filters.

Reference: docs/merge-queue-design.md#gt-mq-list


Define Engineer as the Refinery agent role

Clarify the distinction:

- **Refinery** = place/module/directory/workspace
  - `<rig>/refinery/` directory structure
  - `gt refinery start/stop/status` commands
  - tmux session name: `refinery` or `<rig>-refinery`

- **Engineer** = role/agent who works in the Refinery
  - CLAUDE.md prompting: "You are an Engineer..."
  - Documentation: "The Engineer processes merge requests..."
  - Mail address: `<rig>/engineer` (or `<rig>/refinery`?)

Updates needed:
- Add Engineer role description to docs
- Update CLAUDE.md templates for refinery agents
- Keep `gt refinery` commands as-is (they manage the place)
- Internal code stays `internal/refinery/` (the module)

Future consideration: Multiple Engineers in one Refinery for parallel merge processing.


Create rig .runtime/ for rig runtime state

Move ephemeral rig state to .runtime/:
- Create <rig>/.runtime/ directory
- Move .gastown/witness.json → .runtime/witness.json
- Move .gastown/refinery.json → .runtime/refinery.json
- Move .gastown/namepool.json (state portion) → .runtime/namepool-state.json
- Update .gitignore to ignore .runtime/
- Update all code references


CLI: rig commands (add, list, show, remove)

GGT needs rig management commands.

Missing Commands:
- gt rig add <git-url> [--name NAME] - Add rig to workspace
- gt rig list - List all rigs with status
- gt rig show <rig> - Show detailed rig info
- gt rig remove <rig> - Remove a rig

PGT Reference: gastown-py/src/gastown/cli/rig_cmd.py

Current State:
- gt init creates rig structure but no ongoing management
- Rig discovery in internal/rig/manager.go but not exposed via CLI


gt mq reject: manual MR rejection

Implement 'gt mq reject <id> --reason "..."' for manual rejection.

Actions:
1. Verify MR exists and is open
2. Close MR with close_reason=rejected
3. Notify worker via mail (optional)
4. Do NOT close source issue (work not done)

Options:
- --reason REASON: required explanation
- --notify: send mail to worker

Reference: docs/merge-queue-design.md#cli-commands


bd ready --type: missing type filter for MQ integration

bd ready lacks --type flag that engineer.go expects.

## Code (internal/refinery/engineer.go)
readyMRs, err := e.beads.ReadyWithType("merge-request")

## Actual bd ready
No --type flag - only supports assignee, label, priority filters.

## Impact
Refinery can't find merge-requests in queue, so MQ doesn't process anything.

## Fix Options
1. Add --type flag to bd ready
2. Use bd list --type=merge-request --status=open instead
3. Both (ready filters for unblocked, list for all)

This is blocking the entire MQ pipeline.


MCP beads tools fail from polecat directories

The beads MCP plugin (plugin:beads:beads) fails to find issues when invoked from polecat directories.

## Observed
- Polecat in /gt/gastown/polecats/dementus
- MCP tool: plugin:beads:beads - show (issue_id: 'gt-th7')
- Error: 'bd command failed: Error: no issue found matching gt-th7'

## Expected
MCP tools should work the same as running bd directly.

## Note
This may be related to gt-tmm (beads sync issue) rather than an MCP-specific bug. The MCP tool uses bd under the hood, and bd can't find the issue because the polecat's beads database is stale.


Create Refinery role template

Add Refinery template to internal/templates/roles/:
- refinery.md.tmpl with full role context
- Variables: rig name, working directory, handoff bead ID
- Update SeedRoleTemplates to include it
- gt prime uses this template for Refinery context


Retry logic: exponential backoff for transient failures

Implement retry logic for transient failures.

Retryable failures:
- Push failed (network, auth transient)
- Test flaky (config: retry_flaky_tests)
- Fetch failed (network)

Retry strategy:
- Max retries: 3 (configurable)
- Backoff: 1s, 2s, 4s (exponential)
- On final failure: treat as permanent, assign back

Non-retryable failures:
- Merge conflict
- Test consistently fails
- Build error

Track retry count in MR metadata for debugging.

Reference: docs/merge-queue-design.md#failure-recovery


gt daemon: Background service management

## Summary

ONE daemon for all Gas Town - a simple Go process (not a Claude agent) that:
1. Pokes agents periodically (heartbeat)
2. Processes lifecycle requests
3. Restarts sessions when agents request cycling

## Architecture

Daemon (gt daemon)
- Pokes Mayor: "HEARTBEAT: check your rigs"
- Pokes each Witness: "HEARTBEAT: check your workers"
- Has inbox at daemon/ for lifecycle requests
- Restarts sessions on cycle requests

## NOT the daemon's job:
- Making decisions (Witnesses do that)
- Running Claude (it's a Go process)
- Processing work (polecats do that)
- Direct polecat management (Witnesses do that)

The daemon is a **dumb scheduler** - poke things, execute lifecycle requests. All intelligence is in agents.

## Commands

- gt daemon start: Start daemon (background)
- gt daemon stop: Stop daemon
- gt daemon status: Show daemon status
- gt daemon logs: View daemon logs

## Daemon Loop

Every heartbeat interval:
1. Poke Mayor
2. For each rig: Poke Witness
3. Process lifecycle requests from daemon/ inbox
4. Check for dead sessions, restart if cycle requested

## Lifecycle Request Handling

Daemon checks its inbox (daemon/) for lifecycle requests:
- From Mayor: cycle/restart Mayor session
- From Witnesses: cycle/restart Witness session

On request:
1. Verify agent state shows requesting_cycle
2. Kill session
3. Start new session
4. Clear requesting_cycle flag

## Poke Protocol

Poke = tmux inject "HEARTBEAT: do your job"
- Agent ignores if already working
- Agent wakes up if idle
- Idempotent - multiple pokes are fine

## Lifecycle Hierarchy

- Daemon manages: Mayor, all Witnesses
- Witness manages: Polecats, Refinery (per rig)
- Crew: self-managed (human workspace)

## Related Issues

- gt-kmn.11: Daemon heartbeat details
- gt-gby: gt handoff command (unified lifecycle)
- gt-u1j.9: Fold witness daemon into this


CloudRun persistent connections: HTTP/2 keepalive

## Overview

Implement persistent HTTP/2 connections to keep Cloud Run containers warm.

## Problem

Cloud Run has cold start latency when scaling from 0. Persistent connections keep containers warm.

## Implementation

```go
type PersistentConnectionManager struct {
    serviceURL string
    conn       net.Conn
    client     *http2.ClientConn
    mu         sync.Mutex
    lastUsed   time.Time
    keepAlive  time.Duration
}

func (m *PersistentConnectionManager) GetConnection() (*http2.ClientConn, error) {
    m.mu.Lock()
    defer m.mu.Unlock()

    // Reuse existing connection if healthy
    if m.client != nil && m.client.CanTakeNewRequest() {
        m.lastUsed = time.Now()
        return m.client, nil
    }

    // Create new connection
    return m.dial()
}

func (m *PersistentConnectionManager) keepAliveLoop() {
    ticker := time.NewTicker(m.keepAlive / 2)
    for range ticker.C {
        m.mu.Lock()
        if time.Since(m.lastUsed) > m.keepAlive {
            // Connection idle too long, close it
            m.close()
        } else {
            // Send ping to keep alive
            m.ping()
        }
        m.mu.Unlock()
    }
}
```

## Integration with CloudRunOutpost

```go
type CloudRunOutpost struct {
    // ...existing fields...
    connMgr *PersistentConnectionManager
}

func (o *CloudRunOutpost) Spawn(...) {
    conn, err := o.connMgr.GetConnection()
    // Use connection for work dispatch
}
```

## Config

```yaml
outposts:
  - name: cloudrun-burst
    type: cloudrun
    # ...
    keep_alive: 5m  # Keep connection warm for 5 minutes
```

## Files

- `internal/cloudrun/connection.go`

## Dependencies

Depends on: gt-9a2.8 (basic CloudRunOutpost)


gt doctor: detect orphaned code on beads-sync branch

After merging beads-sync to main, some code changes can be lost if the merge conflict resolution drops files.

Add a doctor check that runs:
  git diff main..beads-sync -- '*.go' '*.md'

If there are differences in code files (not just .beads/), warn about potentially orphaned work.

Today's incident: Merge 96c773f lost mailbox.go and router.go changes from 5791752, requiring re-implementation.

Acceptance:
- gt doctor warns if beads-sync has unmerged code changes
- Excludes .beads/ directory (expected to differ)
- Shows file list of orphaned changes


Phase 2.3: Polecat CLAUDE.md molecule workflow protocol

Update polecat prompting for molecule-based work.

## CLAUDE.md Updates

Add section on molecule workflow:

```markdown
## Molecule Workflow

When assigned a molecule (check gt prime output):

1. Follow molecule steps in order
2. Mark steps complete: bd mol step complete <step-id>
3. Before signaling done:
   a. Generate summary of work performed
   b. Run: bd squash <molecule-root> --summary "<your summary>"
4. Then signal done as normal

### Summary Guidelines

Your summary should include:
- What was the task?
- What did you do?
- What was the outcome?
- Any issues or follow-ups?

Keep it to 2-4 sentences. This becomes the permanent record.
```


Engineer main loop: poll for ready merge-requests

Implement the Engineer's main processing loop.

Loop structure:
1. Query: bd ready --type=merge-request
2. If empty: sleep(poll_interval), continue
3. Select highest priority, oldest MR
4. Claim: bd update <id> --status=in_progress
5. Process (delegate to other subtasks)
6. Repeat

Configuration:
- poll_interval: from rig config (default 30s)
- max_concurrent: from rig config (default 1)

The loop should be interruptible and handle graceful shutdown.

Reference: docs/merge-queue-design.md#engineer-processing-loop


Merge execution: merge, test, push

Implement the actual merge execution.

Steps:
1. git checkout <mr.target>
2. git merge <mr.branch> --no-ff -m 'Merge <branch>: <title>'
3. If config.run_tests:
   - Run test_command (from config)
   - If failed: git reset --hard HEAD~1, return Failure(tests_failed)
4. git push origin <mr.target>
5. Return Success(merge_commit=HEAD)

Configuration:
- run_tests: bool (default true)
- test_command: string (default 'go test ./...')

Handle push failures with retry logic.

Reference: docs/merge-queue-design.md#process-merge-steps


Phase 5.2: Ephemeral error handling and recovery

Handle edge cases in ephemeral molecule lifecycle.

## Scenarios

### Agent dies mid-molecule
- Ephemeral state persists
- Witness detects stall (no heartbeat)
- Options:
  a. Nudge agent to resume
  b. Reassign to new agent
  c. Escalate to Mayor

### Squash fails
- Retry with exponential backoff
- If persistent failure, escalate
- Don't lose the ephemeral state until squash succeeds

### Orphaned molecules
- Molecule started, never completed
- gt doctor detects (>24h old with no activity)
- Options:
  a. Manual review
  b. Auto-abandon with 'abandoned' digest
  c. Reassign

### Ephemeral repo corruption
- Re-init from scratch
- Active molecules are lost
- Main beads is source of truth for assigned work

## Implementation

Add error handling to:
- bd mol bond (handle init failures)
- bd squash (retry logic)
- gt doctor (recovery suggestions)


Merge: gt-svi.1

type: merge-request
branch: polecat/Max
target: main
source_issue: gt-svi.1
rig: gastown


Test4

test4 body


Document Overseer role (human operator)

Document the Overseer role in Gas Town architecture.

## The Overseer

The **Overseer** is the human operator of Gas Town. Not an agent - a person.

## Responsibilities

| Area | Overseer Does | Mayor/Agents Do |
|------|---------------|-----------------|
| Strategy | Define project goals | Execute toward goals |
| Priorities | Set priority order | Work in priority order |
| Escalations | Final decision on stuck work | Escalate to Overseer |
| Resources | Provision machines | Use allocated resources |
| Quality | Review & approve swarm output | Produce output |
| Operations | Run gt commands, monitor dashboards | Do the work |

## Key Interactions

### Overseer → Mayor
- Start/stop Mayor sessions
- Direct Mayor via conversation
- Review Mayor recommendations
- Approve cross-rig decisions

### Mayor → Overseer (Escalations)
- Stuck workers after retries
- Resource decisions (add machines, polecats)
- Ambiguous requirements
- Architecture decisions

## Operating Cadence

Typical Overseer workflow:
1. Morning: Check status, review overnight work
2. During day: Monitor, respond to escalations, adjust priorities
3. End of day: Review progress, plan next batch

## Commands for Overseers

```bash
gt status              # Quick health check
gt doctor              # Detailed diagnostics
gt doctor --fix        # Auto-repair issues
gt inbox               # Messages from agents
gt stop --all          # Emergency halt
```

## Documentation Updates

Add to docs/architecture.md:
- Overseer section under Agent Roles
- Clarify Mayor reports to Overseer
- Add Overseer to workflow diagrams


gt spawn should create fresh polecat worktree, never reuse

Currently gt spawn tries to reuse existing polecats, which causes:

1. Stale beads database
2. Stale code (behind main/integration)
3. Old inbox messages
4. Git history pollution

## Current Behavior

gt spawn:
1. Looks for idle polecat in pool
2. If found, reuses existing worktree
3. Assigns new issue

## Desired Behavior

gt spawn:
1. Always create FRESH polecat from current main/integration
2. Fresh worktree with clean beads
3. No reuse of old worktrees

## Name Pool Still Useful

Keep name pool for:
- Allocating themed names (mad-max, etc.)
- Tracking which names are in use

But worktrees should be created fresh each time.

## Implementation

In spawn.go, before starting work:
1. If worktree exists: remove it first
2. Create fresh worktree from integration branch
3. Sync beads from rig to polecat
4. Then proceed with work assignment

This ensures polecats always start with latest code and beads.


init.go: Replace custom contains() with strings.Contains


MQ dashboard widget: queue status in TUI

Add merge queue status widget to the Bubbletea TUI dashboard.

Display:
┌─────────────────────────────────────────────────┐
│              MERGE QUEUE STATUS                  │
├─────────────────────────────────────────────────┤
│ Pending: 3   In Progress: 1   Merged (24h): 12  │
├─────────────────────────────────────────────────┤
│ QUEUE:                                          │
│   ► gt-mr-004  P0  Nux/gt-xyz     Processing... │
│     gt-mr-005  P1  Toast/gt-abc   Ready         │
│     gt-mr-006  P1  Capable/gt-def Blocked (005) │
└─────────────────────────────────────────────────┘

Interactive features:
- Navigate queue entries
- View MR details
- Retry/reject from dashboard

Depends on: gt-u1j.2 (Bubbletea TUI dashboard)

Reference: docs/merge-queue-design.md#dashboard


health-scan

Ping Witnesses and Refineries. Run gt status --health. Remediate if down.


CLI: witness commands (start, stop, status)

Witness daemon CLI commands.

## Commands

### gt witness start
Start the witness daemon for a rig.
```
gt witness start <rig> [--interval <seconds>]
```
- Starts background daemon process
- Default heartbeat interval: 30s
- Logs to <rig>/witness/witness.log

### gt witness stop
Stop the witness daemon.
```
gt witness stop <rig>
```
- Graceful shutdown
- Completes current heartbeat cycle

### gt witness status
Show witness status.
```
gt witness status <rig> [--json]
```
Output:
- Running/stopped
- Last heartbeat time
- Polecats being monitored
- Recent nudges/escalations

### gt witness logs
View witness logs.
```
gt witness logs <rig> [--follow] [--lines <n>]
```
- --follow: Continuous output (like tail -f)
- --lines: Number of lines (default 50)

## Daemon Management

Witness runs as background process:
- PID stored in <rig>/witness/witness.pid
- Uses nohup for persistence
- Logs structured JSON events

## Implementation

```go
var witnessCmd = &cobra.Command{Use: "witness"}
witnessCmd.AddCommand(startCmd, stopCmd, statusCmd, logsCmd)
```

Start launches daemon via exec, status reads PID file and pings process.


Merge: gt-3x1.3

branch: polecat/Doof
target: main
source_issue: gt-3x1.3
rig: gastown


Digest: mol-deacon-patrol

Test patrol cycle - verifying wisp flow


session stop: --force flag is defined but not used


mol-theme-generate: Custom name pool generation via cognition

Currently polecat name themes are hardcoded in namepool.go. Simple theme selection is fine as static config, but custom name generation should be a molecule.

Examples requiring cognition:
- "Generate 50 polecat names in the style of [book/movie/game]"
- "Create names that match the project's domain (medical, financial, etc.)"
- "Extend the mad-max theme with 20 more obscure characters"

## Molecule: theme-generate
Generate custom polecat names for a rig.

## Step: analyze-request
Understand the naming request:
- Theme style or source material
- Number of names needed
- Any constraints (length, format)

## Step: generate-candidates
Generate candidate names matching the style.
Aim for 2x the requested count.

## Step: validate-names
Filter candidates:
- No duplicates with existing themes
- Appropriate length (3-15 chars)
- No problematic terms

## Step: create-theme
Write the custom theme to rig config or beads.
Register in name pool.
Needs: validate-names

## Notes
- Output is a new theme entry in BuiltinThemes equivalent
- Could be stored as a pinned bead for persistence


Recover stale polecat work: 4 branches with unpushed commits

During observation of polecat workflow, found 4 polecats with unpushed work:

## Branches Pushed (preserved)
- polecat/capable: 3 commits (molecule catalog, doctor orphan detection, gt done)
- polecat/dementus: 4 commits (Witness MVP, handoff fixes)
- polecat/furiosa: 2 commits (bulk polecat removal, spawn handoff)
- polecat/rictus: 1 commit (molecule docs)

## Action Required
1. Review each branch for merge-worthiness
2. Either:
   a. Create PRs for valuable work
   b. OR discard if superseded
3. After decision, clean up polecats properly

## Root Cause
Polecats were not cleaned up after previous work sessions. This is exactly why we need:
- gt-u1k: gt shutdown should fully cleanup polecats
- gt-8v8: Refuse to lose uncommitted work
- gt-9nf: Always create fresh polecats


Direct test

Testing direct bd create


load-context

Run gt prime and bd prime. Verify issue assignment.
Check inbox for any relevant messages.

Read the assigned issue (gt-qwyu) and understand the requirements.
Identify any blockers or missing information.


gt crew restart command

Add a 'gt crew restart' command that kills the tmux session and restarts fresh. Useful when a crew member gets confused or needs a clean slate.

Should:
- Kill existing tmux session if running
- Start fresh session with claude
- Run gt prime to reinitialize context

Alias: gt crew rs


beads: Stop searching upward when .beads found

## Problem

When running bd commands in a nested directory structure with multiple .beads directories, bd shows a confusing warning:

```
╔══════════════════════════════════════════════════════════════════════════╗
║ WARNING: 2 beads databases detected in directory hierarchy              ║
╠══════════════════════════════════════════════════════════════════════════╣
║ Multiple databases can cause confusion and database pollution.          ║
║                                                                          ║
║   /Users/stevey/gt/gastown/.beads (261 issues)                           ║
║   /Users/stevey/gt/.beads (21 issues)                                    ║
║                                                                          ║
║ WARNING: Not using the closest database! Check your BEADS_DB setting.   ║
║                                                                          ║
║ RECOMMENDED: Consolidate or remove unused databases to avoid confusion. ║
╚══════════════════════════════════════════════════════════════════════════╝
```

## Why This Is Wrong

In Gas Town, nested .beads directories are **intentional and necessary**:
- Town level: /Users/stevey/gt/.beads (mail, town-level issues)
- Rig level: /Users/stevey/gt/gastown/.beads (gastown project issues)
- Worker level: polecats have their own beads in worktrees

These are **unrelated** beads instances for different scopes. They should never be consolidated.

## Expected Behavior

When bd finds a .beads directory, it should:
1. Use that directory (closest ancestor wins)
2. **Stop searching upward** - do not look for parent .beads directories
3. **No warning** about multiple databases

## Current Behavior

bd searches all the way up to root, finds all .beads directories, and warns about "multiple databases" even though they are separate, intentional instances.

## Fix

In the database discovery code, stop the upward search as soon as a .beads directory is found. The first .beads found is the one to use, and parent directories are out of scope.

## Note

This is a beads issue, filed here for tracking. Should be implemented in the beads codebase.


inbox-check

Handle callbacks from agents. Check gt mail inbox, process lifecycle requests.


Create .runtime/ for town-level runtime state

Move ephemeral town state to .runtime/:
- Create ~/gt/.runtime/ directory structure
- Move daemon/state.json → .runtime/daemon.json
- Move deacon/heartbeat.json → .runtime/deacon.json
- Move .gastown/agent-state.json → .runtime/agent-requests.json
- Move .gastown/keepalive.json → .runtime/keepalive.json
- Update .gitignore to ignore .runtime/
- Update all code references


mol-crew-session: Startup/shutdown protocols for crew workers

Crew workers (like joe, max) don't have patrol molecules keeping them fresh. When gt gets rebuilt, they have stale binaries that cause hangs and bugs.

## Problem

- Crew binaries get stale when gt is rebuilt elsewhere
- No automatic pull/rebase/rebuild on session start
- No standardized shutdown protocol (sync, push, handoff)

## Solution: mol-crew-session

A molecule template for crew sessions:

### Startup Phase
1. `git pull --rebase` - get latest code
2. `bd sync` - sync beads
3. `go build -o gt ./cmd/gt` - rebuild gt (if in gastown)
4. `gt prime` - load context

### Work Phase
- Open-ended human interaction
- No molecule steps - just work until done

### Shutdown Phase
1. `git status` - check for uncommitted changes
2. `bd sync` - sync beads
3. `git push` - push code
4. Handoff if incomplete work

## Implementation

1. Define mol-crew-session in builtin_molecules.go
2. Update crew CLAUDE.md to reference the protocol
3. Optionally: gt prime auto-runs startup steps

## Dependencies

- Should implement after deacon/witness/polecat patrols are stable
- Consider: gt-3x0z.10 (Witness patrol molecules)

## Related

- gt-3x0z.9: Deacon wisp patrol (done)
- fix-gt script: Current workaround for binary freshness


Spawn --molecule integration

Implement gt spawn --molecule flag for molecule-based polecat workflows.

Usage: gt spawn --issue gt-xyz --molecule mol-gastown-polecat

Behavior:
1. Validate molecule exists and is well-formed
2. Create molecule instance (child beads) under the issue
3. Find first ready step(s) in the instance
4. Spawn polecat with first ready step as initial work

Implementation:
1. Add --molecule flag to spawn command
2. Call molecule.Instantiate()
3. Query ready steps from instance
4. Pass first ready step to polecat context

Files: internal/cmd/spawn.go

Acceptance:
- --molecule flag works
- Creates proper molecule instance
- Polecat starts on first ready step
- End-to-end test with actual polecat


mol-swarm-cleanup: Post-swarm debris cleanup molecule

After a 20+ worker swarm completed, found significant beads debris:
- 18 stale messages (work assignments, lifecycle requests, swarm instructions)
- 3 completed issues still open/in_progress
- Test messages accumulated

Need: Document a post-swarm checklist or create gt swarm cleanup command that:
1. Closes stale work assignment messages
2. Reviews in_progress issues for completion
3. Closes orphaned lifecycle messages
4. Optionally archives test messages


GGT vs PGT Gap Analysis Summary

Summary of gaps comparing GGT (~4,500 LOC) to PGT (~27,700 LOC).

## Critical Gaps (P1) - Existing Issues
- gt-u1j.17: Polecat CLI (add, list, wake, sleep) - DETAILED
- gt-u1j.16: Rig CLI (add, list, show, remove) - DETAILED
- gt-u1j.18: Witness CLI (start, stop, status) - DETAILED
- gt-f9x.4: Doctor framework - DETAILED
- gt-f9x.5: Workspace doctor checks - DETAILED
- gt-f9x.6: Rig doctor checks - DETAILED

## Critical Gaps (P1) - New Issues
- gt-a95: Refinery background daemon mode - ENHANCED
- gt-hgk: Mail message types and threading - ENHANCED

## Significant Gaps (P2) - New Issues
- gt-d46: Mail CLI archive/purge/search - ENHANCED
- gt-e9k: Swarm preflight/postflight - ENHANCED
- gt-662: Swarm report generation - ENHANCED
- gt-69l: Hook system - ENHANCED
- gt-3yj: Agent monitoring - ENHANCED
- gt-1ky: Workspace CLI (may overlap f9x.3) - ENHANCED
- gt-9j9: Worker status reporting - ENHANCED
- gt-qao: Mayor CLI - ENHANCED
- gt-7o7: Session pre-shutdown checks - ENHANCED
- gt-c92: Batch all command - ENHANCED
- gt-lno: Swarm state persistence - ENHANCED
- gt-a9y: File locking - ENHANCED
- gt-30o: Error handling improvements - ENHANCED

## Significant Gaps (P2) - Existing Issues
- gt-kmn.12: Ephemeral rig support - DETAILED

## Lower Priority (P3) - New Issues
- gt-3fm: Mail orchestrator daemon - ENHANCED
- gt-2kz: Cleanup commands - ENHANCED
- gt-ebl: Names commands - ENHANCED
- gt-1u9: Interactive prompts - ENHANCED
- gt-8lz: Help text improvements - ENHANCED

## Closed as Duplicates
- gt-3tz → gt-u1j.17 (polecat CLI)
- gt-e1r → gt-u1j.16 (rig CLI)
- gt-86w → gt-f9x.4/5/6 (doctor)
- gt-alx → gt-kmn.12 (ephemeral rigs)

## Execution Order Recommendation
1. P1 CLI commands (existing detailed issues ready to implement)
2. gt-a95: Refinery daemon (blocks autonomous operation)
3. gt-7o7: Pre-shutdown checks (prevents data loss)
4. gt-a9y: File locking (prevents corruption)
5. gt-hgk + gt-d46: Mail improvements
6. gt-69l: Hook system (enables extensibility)
7. Remaining P2s in any order
8. P3s as time permits


Verify architecture.md shows correct harness and rig structure

Review architecture.md diagrams:
- Verify town-level structure shows harness correctly
- Confirm rig-level mayor/rig/ is shown (it appears to be there at line 197)
- Check mermaid diagrams match ASCII diagrams
- Update if any inconsistencies found
- Cross-reference with new harness.md docs


Worker prompting: Beads write access

Add beads write access section to polecat AGENTS.md.template.

## Beads Access Section for Prompting

```markdown
## Beads Access

You have **full beads access** - create, update, and close issues.

### Quick Reference

```bash
# View work
bd ready                    # Issues ready (no blockers)
bd list                     # All open issues
bd show <id>                # Issue details

# Create issues
bd create --title="Fix bug" --type=bug --priority=2
bd create --title="Add feature" --type=feature

# Update issues
bd update <id> --status=in_progress    # Claim work
bd close <id>                          # Mark complete

# Sync (required before merge!)
bd sync                     # Commit beads changes to git
```

### When to Create Issues

Create beads issues when you discover work that:
- Is outside your current task scope
- Would benefit from tracking
- Should be done by someone else

**Good examples**:
```bash
bd create --title="Race condition in auth" --type=bug --priority=1
bd create --title="Document API rate limits" --type=task --priority=3
```

**Don't create for**:
- Tiny fixes you can do in 2 minutes
- Vague "improvements" with no scope
- Work already tracked elsewhere

### Beads Sync Protocol

**CRITICAL**: Always sync beads before merging!

```bash
bd sync                    # Commits beads changes
git add .beads/
git commit -m "beads: sync"
```

If you forget to sync, beads changes are lost when session ends.
```

## Implementation

Add to AGENTS.md.template polecat section.


Overseer Crew: User-managed persistent workspaces

## Overview

Crew workers are the overseer's (human's) personal workspaces within a rig. Unlike polecats which are witness-managed and ephemeral, crew workers are:

- **Persistent**: Not auto-garbage-collected
- **User-managed**: Overseer controls lifecycle
- **Long-lived identities**: dave, emma, fred - recognizable names
- **Gas Town integrated**: Mail, handoff mechanics work
- **Tmux optional**: Can work in terminal directly

## Directory Structure

```
<rig>/
  polecats/       # Managed workers (witness controls)
  refinery/       # Merge queue processor
  witness/        # Pit boss
  crew/           # Overseer's personal workspaces
    dave/         # Full clone, persistent
    emma/         # Full clone, persistent
    fred/         # Full clone, persistent
```

## Key Differences from Polecats

- Location: crew/ instead of polecats/
- Lifecycle: User-managed, not witness-managed
- Auto-cleanup: Never (polecats auto-cleanup on swarm land)
- Issue assignment: Optional (polecats require it)
- Tmux: Optional (polecats require it)
- Mail & Handoff: Yes for both
- Identity: Persistent (polecats are ephemeral)

## CLI Commands

- gt crew add <name> [--rig <rig>] - Create crew workspace
- gt crew list [--rig <rig>] - List crew workspaces
- gt crew at <rig>/<name> - Attach to workspace (start session)
- gt crew attach <name> - Attach (infer rig from cwd)
- gt crew refresh <name> - Handoff + restart (context cycling)
- gt crew remove <name> [--force] - Remove workspace
- gt crew status [<name>] - Show workspace status

## Design Notes

- Crew workers use full git clones (not worktrees)
- Optional beads integration via BEADS_DIR
- Mail-to-self handoff works for context cycling
- No witness monitoring or nudging
- No automatic issue assignment required

## Background

Users often maintain separate repo clones for serial agent work. This is tedious to set up manually. Crew workspaces bring these into Gas Town's infrastructure while keeping user control.


Merge: gt-pyqv

branch: polecat/dementus
target: main
source_issue: gt-pyqv
rig: gastown


gt rig reset --stale: Clear orphaned in_progress items

Reset in_progress issues when their assigned agent no longer exists.

## Problem
When polecats die without cleanup, their issues remain in_progress forever.
Need a way to bulk-reset these orphaned items.

## Command
```bash
gt rig reset --stale [--dry-run]
```

## Logic
For each in_progress issue in rig:
1. Parse assignee (e.g., "gastown/furiosa")
2. Map to tmux session name (gt-gastown-furiosa)
3. If session does NOT exist:
   - Reset status to "open"
   - Clear assignee
4. Exception: skip crew/* assignees (persistent identities)
   OR check if crew tmux session exists

## Output
```
Resetting stale work in gastown:
  gt-abc: gastown/furiosa (no session) → open
  gt-def: gastown/nux (no session) → open
  Skipped: gt-xyz: gastown/crew/max (persistent)
Reset 2 issues, skipped 1
```

## Related
- gt-2kz: CLI cleanup commands for stale state
- gt-rdmw: orphan-check in deacon patrol
- gt-orphans command (list orphaned molecules)


Design GGT prompt architecture

Audit PGT prompts and design canonical prompt system for GGT. Create docs/prompts.md with inventory, gap analysis, and Witness prompt design.


Work on ga-p6r: Add handoff protocol to spawn priming. En...

Work on ga-p6r: Add handoff protocol to spawn priming. Ensure polecats receive handoff context when spawned. When done, submit MR (not PR) to integration branch for Refinery.


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


self-review

Review your own changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
- Security concerns

Fix any issues found before proceeding.

Depends: implement


Swarm beads naming convention and auto-filing

Beads naming convention for swarm lifecycle events.

## Bead IDs

- swarm-started:<swarm-id>     # Filed when swarm begins
- swarm-task-merged:<swarm-id>:<task-id>  # Filed per task merge
- swarm-landed:<swarm-id>      # Filed when merged to main
- swarm-failed:<swarm-id>      # Filed on unrecoverable failure

## swarm-started Bead

Filed by: Mayor/Refinery at swarm creation
Contains:
- Swarm title and description
- List of tasks (issue IDs)
- List of workers (polecat names)
- Base commit SHA

## swarm-task-merged Bead

Filed by: Refinery after each successful merge
Contains:
- Task issue ID and title
- Polecat name
- Merge commit SHA
- Test results summary

## swarm-landed Bead

Filed by: Refinery after landing to main
Contains:
- Final merge commit SHA
- Stats: tasks completed, time taken
- List of all merged task beads
- Integration branch name (now deleted)

## swarm-failed Bead

Filed by: Refinery on unrecoverable failure
Contains:
- Failure reason
- Tasks merged vs not merged
- Recovery guidance

## Why Beads (not just mail)

- Persistent, queryable, synced to git
- Other agents can check status without mail
- Creates audit trail
- Works when agents offline


gt park command for parking molecules on external deps

Add `gt park` command for when polecat hits external dependency:

```bash
gt park --step=gt-mol.3 --waiting="beads:mol-run-assignee"
```

This command:
1. Adds blocked_by: external:beads:mol-run-assignee to the step
2. Clears assignee on the step
3. Clears assignee on molecule root
4. Sends handoff mail to self with context
5. Shuts down polecat session

The molecule enters "parked" state (derived: in_progress + no assignee + blocked step).

Part of cross-project dependency system.
See: docs/cross-project-deps.md

Depends on Beads: bd-om4a (external: blocked_by support)


Per-epic config overrides: custom merge settings

Allow per-epic merge configuration overrides.

Epic can specify merge_config in its description:
  merge_config:
    run_tests: true
    test_command: 'go test -race ./...'
    on_conflict: assign_back

When processing MRs for an epic:
1. Load rig-level merge_queue config
2. Check if epic has merge_config
3. Merge epic config over rig config
4. Use merged config for processing

Use cases:
- Risky refactors: more thorough testing
- Urgent fixes: skip some checks
- Experimental work: different test suite

Reference: docs/merge-queue-design.md#per-epic-overrides


Molecules: Composable Workflow Beads

## Summary

Molecules are crystallized workflow patterns stored as Beads issues.
When instantiated, the molecule creates child beads forming a DAG.

## Key Insight: Molecules ARE Beads

Per HOP Decision 001: Beads IS the ledger. Molecules don't get a separate YAML format - they're issues with `type: molecule` containing prose-based step definitions.

Agents don't need rigid schemas. They parse natural language natively. A molecule is just instructions with enough structure for tooling.

## Example: Engineer in a Box

```markdown
id: mol-xyz
type: molecule
title: Engineer in a Box

This workflow takes a task from design to merge.

## Step: design
Think carefully about architecture. Consider existing patterns,
trade-offs, testability.

## Step: implement
Write clean code. Follow codebase conventions.
Needs: design

## Step: review
Review for bugs, edge cases, style issues.
Needs: implement

## Step: test
Write and run tests. Cover happy path and edge cases.
Needs: implement

## Step: submit
Submit for merge via refinery.
Needs: review, test
```

## Instantiation

```bash
# Attach molecule when spawning
gt spawn --issue gt-abc --molecule mol-xyz

# Creates child beads atomically:
gt-abc.design     ← ready first
gt-abc.implement  ← blocked by design
gt-abc.review     ← blocked by implement
gt-abc.test       ← blocked by implement
gt-abc.submit     ← blocked by review, test
```

Each step issue gets an `instantiated-from` edge to the molecule (with step metadata).

## Why This Matters

1. **Unified data plane**: Everything in Beads, no parallel YAML channel
2. **AI-native**: Prose instructions, not rigid schemas
3. **Error isolation**: Each step is a checkpoint - failure doesn't lose progress
4. **Scales with AI**: As agents get smarter, they handle more complex molecules

## Implementation Primitives

- `ParseMoleculeSteps()`: Extract steps from prose (convention-based)
- `InstantiateMolecule()`: Atomic transaction creating all steps + edges
- `instantiated-from` edge type: Track provenance
- Parameterization: `{{variable}}` substitution from context map


Architecture: Decentralized rig structure with per-rig agents

## Decision

Adopt decentralized architecture where each rig contains all its agents (mayor/, witness/, refinery/, polecats/) rather than centralizing mayor clones at town level.

## Town Level Structure

```
~/ai/                              # Town root
├── config/                        # Town config (VISIBLE, not hidden)
│   ├── town.json                  # {"type": "town"}
│   ├── rigs.json                  # Registry of managed rigs
│   └── federation.json            # Wasteland config (future)
│
├── mayor/                         # Mayor's HOME at town level
│   ├── CLAUDE.md
│   ├── mail/inbox.jsonl
│   └── state.json
│
└── <rigs>/                        # Managed projects
```

## Rig Level Structure (e.g., wyvern)

```
wyvern/                            # Rig = clone of project repo
├── .git/info/exclude              # Gas Town adds: polecats/ refinery/ witness/ mayor/
├── .beads/                        # Beads (if project uses it)
├── [project files]                # Clean project code on main
│
├── polecats/                      # Worker clones
│   └── <name>/                    # Each is a git clone
│
├── refinery/
│   ├── rig/                       # Refinery's clone
│   ├── state.json
│   └── mail/inbox.jsonl
│
├── witness/                       # NEW: Per-rig pit boss
│   ├── rig/                       # Witness's clone
│   ├── state.json
│   └── mail/inbox.jsonl
│
└── mayor/
    ├── rig/                       # Mayor's clone for this rig
    └── state.json
```

## Key Decisions

1. **Visible config dir**: `config/` not `.gastown/` (models don't find hidden dirs)
2. **Witness per-rig**: Each rig has its own Witness (pit boss) with its own clone
3. **Mayor decentralized**: Mayor's clones live IN each rig at `<rig>/mayor/rig/`
4. **Minimal invasiveness**: Only `.git/info/exclude` modified, no commits to project
5. **Clone subdir name**: Keep `rig/` for consistency (refinery/rig/, witness/rig/, mayor/rig/)

## Role Detection

- Town root or mayor/ → Mayor (town level)
- Rig root → Mayor (canonical main)
- <rig>/mayor/rig/ → Mayor (rig-specific)
- <rig>/refinery/rig/ → Refinery
- <rig>/witness/rig/ → Witness
- <rig>/polecats/<name>/ → Polecat

## Migration from PGT

- `mayor/rigs/<rig>/` → `<rig>/mayor/rig/`
- `<rig>/town/` → eliminated (rig root IS the clone)
- Add `witness/` to each rig


implement

Implement the solution for gt-test123. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


Work reconciliation module

Port reconcile.py work verification to Go.

## Purpose

Verify assigned issues are completed before landing.

## Interface

```go
type ReconcileResult struct {
    CompletedIssues  []IssueInfo
    IncompleteIssues []IssueInfo
    AllComplete      bool
    PolecatsChecked  []string
    Errors           []string
}

func ReconcileWork(rig string, polecats []string) *ReconcileResult
func GetAssignedIssues(assignee string) []IssueInfo
func UnassignIssue(issueID string, resetStatus bool) error
```

## Logic

1. Get list of polecats in swarm
2. For each polecat, query beads for assigned issues
3. Categorize as completed (closed) or incomplete (open/in_progress)
4. Return summary for landing decision

## Handling Incomplete Work

If issues incomplete:
- Abort landing (default)
- Or force landing (leaves work unfinished)
- Unassign incomplete issues for future work

## Reference

PGT: swarm/reconcile.py


Port Gas Town to Go

Complete rewrite of Gas Town in Go for improved performance and single-binary distribution.

## Goals
- Single installable binary (gt)
- All Python functionality ported
- Federation support built-in
- Improved performance

## Phases
1. Core infrastructure (config, workspace, git wrapper)
2. Rig & polecat management
3. Session & tmux operations
4. Mail system
5. CLI commands
6. TUI (optional)


Prompt templates: role contexts, nudge messages

Prompt templates for role contexts and messages.

## Template Types

### Role CLAUDE.md Templates

For gt prime and CLAUDE.md generation:
- Mayor template
- Witness template
- Refinery template
- Polecat template

### Message Templates

For notifications and nudges:
- Spawn assignment
- Witness nudge
- Escalation to Mayor
- Session handoff

## Implementation

```go
//go:embed templates/*.md.tmpl
var templateFS embed.FS

type Templates struct {
    fs embed.FS
}

func NewTemplates() *Templates
func (t *Templates) RenderRole(role string, data RoleData) (string, error)
func (t *Templates) RenderMessage(name string, data any) (string, error)
```

## Template Data

```go
type RoleData struct {
    Role      string
    RigName   string
    TownRoot  string
    Polecats  []string
    Commands  []CommandHelp
}

type SpawnData struct {
    Issue       string
    Title       string
    Priority    int
    Description string
}

type NudgeData struct {
    Polecat    string
    Reason     string
    NudgeCount int
    MaxNudges  int
}
```

## Template Location

Embedded in binary via go:embed:
```
internal/templates/
├── roles/
│   ├── mayor.md.tmpl
│   ├── witness.md.tmpl
│   ├── refinery.md.tmpl
│   └── polecat.md.tmpl
└── messages/
    ├── spawn.md.tmpl
    ├── nudge.md.tmpl
    └── escalation.md.tmpl
```

## Usage

gt prime uses role templates.
gt spawn uses spawn template.
Witness uses nudge/escalation templates.


🤝 HANDOFF: Timing fixes applied

Fixed mayor attach timing bug. Completed: timing fix, gt-tulx, Emma beads-6v2. Remaining P1: gt-17zr, gt-kcee, gt-szsq. Run gt prime on startup.


Worker cleanup: Beads sync on shutdown

Add beads sync verification to worker cleanup checklist and Witness verification.

## Update to Decommission Checklist (gt-sd6)

Add to pre-done verification:
- bd sync --status must show 'Up to date'
- git status .beads/ must show no changes

## Beads Edge Cases

Uncommitted beads changes:
  bd sync
  git add .beads/
  git commit -m 'beads: final sync'

Beads sync conflict (rare):
  git fetch origin main
  git checkout main -- .beads/
  bd sync --force
  git add .beads/
  git commit -m 'beads: resolve sync conflict'

## Update to Witness Verification (gt-f8v)

When capturing worker state:
  town capture <polecat> "bd sync --status && git status .beads/"

Check for:
- bd sync --status shows 'Up to date'
- git status .beads/ shows no changes

If beads not synced, nudge:
  WITNESS CHECK: Beads not synced. Run 'bd sync' then commit .beads/. Signal done when complete.


Polecat Mood Plugin (standard)

Standard witness plugin that assesses polecat emotional state.

## Location
`<rig>/plugins/witness/polecat-mood/`

## Mood Emojis
| Mood | Emoji | Detection |
|------|-------|-----------|
| working | 😺 | Active tool calls, making progress |
| productive | 😸 | Completing tasks, tests passing |
| idle | 🐱 | Waiting at prompt, no recent activity |
| confident | 😼 | Self-reviewing, about to submit |
| struggling | 😿 | Repeated errors, test failures |
| stuck | 🙀 | No progress for 10+ min |
| done | 😽 | Work complete, requesting shutdown |
| blocked | 😾 | Explicitly waiting on dependency |

## Plugin Config (plugin.yaml)
```yaml
name: polecat-mood
description: Assess polecat emotional state from session activity
trigger: patrol
tier: haiku
input: session-capture
```

## Output
Plugin outputs gt commands:
```
gt polecat mood Rictus 😺
gt polecat mood Nux 😿
```

## Customization
Users can fork and modify prompt.md to change assessment criteria or add custom moods.


gt crew at: auto-prime when exec'ing Claude in-session

When running 'gt crew at <name>' from inside the target session, we exec Claude directly. But this means we can't send 'gt prime' afterward since we ARE the process.

Possible solutions:
1. Claude startup hook that runs gt prime
2. Pass prompt as argument to claude CLI
3. Wrapper script approach

Related: crew resume prompt also can't be sent in this path.


Consolidate configuration architecture: three-tier model

Rationalize Gas Town's scattered configuration into a clean three-tier model:

## Current Problems
- Config split across mayor/, .gastown/, and rig/config.json
- Runtime state mixed with configuration
- Hidden directories (.gastown/) are missed by agents
- Category confusion: identity vs config vs runtime state

## Proposed Architecture

### Tier 1: Town Config (mayor/)
```
mayor/
├── town.json      # Town identity (unchanged)
├── rigs.json      # Rig registry (unchanged)
└── config.json    # NEW: Town-level configuration
    # theme defaults, daemon settings, etc.
```

### Tier 2: Town Runtime (.runtime/)
```
~/gt/.runtime/                    # NEW: Gitignored
├── daemon.json                   # {pid, started_at, heartbeat}
├── deacon.json                   # {cycle, last_action}
└── agent-requests.json           # Lifecycle requests
```

### Tier 3: Rig Config (settings/)
```
<rig>/
├── config.json                   # Rig identity only (type, git_url, beads.prefix)
├── settings/                     # NEW: Visible, git-tracked
│   ├── config.json               # theme, merge_queue, max_workers
│   ├── namepool.json             # pool settings (style, max)
│   └── roles/                    # Per-role overrides (optional)
└── .runtime/                     # NEW: Gitignored
    ├── witness.json              # {state, started_at, stats}
    ├── refinery.json             # {state, started_at, stats}
    └── namepool-state.json       # {in_use, overflow_next}
```

## Key Principles
1. **Visible > Hidden** for config agents need to find
2. **Git-tracked** for identity and config; **gitignored** for runtime
3. **Separation of concerns**: identity, config, runtime are distinct
4. **Locality**: town config at town root, rig config at rig root

## Migration
- Move .gastown/ contents to appropriate new locations
- Update all code that reads/writes these files
- Update .gitignore patterns
- Update documentation (architecture.md, CLAUDE.md)