Create mol-gastown-polecat derived molecule

Create the standard Gas Town polecat workflow molecule.

## Molecule Definition
\`\`\`markdown
## Molecule: gastown-polecat
Full workflow for Gas Town polecats including binary installation.

Includes: mol-engineer-in-box

## Step: install-binary
After merge is submitted, rebuild and install the local gt binary.
This ensures the latest code is available to all local agents.

Run from the rig directory:
\`\`\`
go build -o gt ./cmd/gt
go install ./cmd/gt
\`\`\`

Needs: submit
\`\`\`

## Why This Molecule
Every polecat that pushes to main should also rebuild the binary.
This ensures the installed gt is always current with main.

## Implementation
1. Add to builtin_molecules.go (after Includes support lands)
2. Update SeedBuiltinMolecules
3. Run gt molecule seed

## Acceptance
- [ ] mol-gastown-polecat exists
- [ ] Includes all engineer-in-box steps
- [ ] Adds install-binary step after submit
- [ ] Can be used with gt spawn --molecule


Merge: gt-rana.3

branch: polecat/dementus
target: main
source_issue: gt-rana.3
rig: gastown


Work on ga-ct2: Add MR workflow to polecat completion. Wh...

Work on ga-ct2: Add MR workflow to polecat completion. When polecat completes work, auto-create MR to integration branch. When done, submit MR (not PR) to integration branch for Refinery.


Phase 4.1: mol-deacon-patrol uses ephemeral

Deacon patrol cycles run as ephemeral molecules.

## Current Deacon Loop

```
while running:
    check_heartbeat()
    check_mail()
    sleep(interval)
```

## Molecule-Based Loop

```
while running:
    mol = bd mol bond mol-deacon-patrol-cycle --ephemeral
    execute_cycle(mol):
        check_heartbeat()
        check_mail()
        log_status()
    summary = generate_cycle_summary()
    bd squash mol --summary summary
    sleep(interval)
```

## Benefits

- Each cycle is tracked
- Digests show daemon health over time
- Can query: 'show me patrol cycles from last hour'
- Crash mid-cycle → ephemeral shows where we were


Use Beads issue status as spawn source of truth

Currently witness tracks spawned issues in .gastown/witness.json to prevent re-spawning:

{"spawned_issues": ["gt-abc1", "gt-def2", ...]}

This is redundant with Beads issue status (in_progress). The witness could query:
  bd list --status=in_progress

The local list serves as a performance cache to avoid querying beads every cycle. Consider:
1. Use Beads as source of truth
2. Keep local cache with TTL
3. Sync cache on witness start

This simplifies state management and ensures consistency.


self-review

Review your own changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
- Security concerns

Fix any issues found before proceeding.

Depends: implement


orphan-check

Find abandoned work. Check for in_progress issues with no active agent.


Test Task 2: Add comment to version.go


Refinery gates: test/lint/build before merge

Before merging polecat work to main, run configurable quality gates.

**From VC**: internal/gates/ - parallel execution with timeout, any failure = overall failure.

**Gas Town implementation**: Refinery config with gate commands:
```yaml
gates:
  test:
    cmd: go test ./...
    timeout: 5m
  lint:
    cmd: golangci-lint run
    timeout: 2m
  build:
    cmd: go build ./...
    timeout: 3m
parallel: true
```

If gates fail, don't merge. Polecat can iterate and retry.

**Value**: Prevents broken code from reaching main. VC had 90.9% gate pass rate.

**VC complexity**: ~200 lines Go
**Gas Town complexity**: ~10 lines YAML


Merge: gt-pyqv

branch: polecat/dementus
target: main
source_issue: gt-pyqv
rig: gastown


Complete gt crew commands (list, attach, remove, refresh, status)

Add remaining crew subcommands to internal/cmd/crew.go:

1. gt crew list - List crew workspaces with status
2. gt crew at/attach - Start tmux session in crew workspace
3. gt crew remove - Remove crew workspace (with safety checks)
4. gt crew refresh - Context cycling with mail-to-self handoff
5. gt crew status - Show detailed workspace status

Build on existing crew add implementation in internal/cmd/crew.go.
Reference closed issues gt-cik.3-7 for original requirements.


Design molecule step hooks

Hooks that fire between molecule steps. When a bead in a molecule closes, trigger hook that can spawn agent attention to prompts/requests. This enables reactive orchestration - the molecule drives, hooks respond. Gas Town feature built on Beads data plane.


Recover stale polecat work: 4 branches with unpushed commits

During observation of polecat workflow, found 4 polecats with unpushed work:

## Branches Pushed (preserved)
- polecat/capable: 3 commits (molecule catalog, doctor orphan detection, gt done)
- polecat/dementus: 4 commits (Witness MVP, handoff fixes)
- polecat/furiosa: 2 commits (bulk polecat removal, spawn handoff)
- polecat/rictus: 1 commit (molecule docs)

## Action Required
1. Review each branch for merge-worthiness
2. Either:
   a. Create PRs for valuable work
   b. OR discard if superseded
3. After decision, clean up polecats properly

## Root Cause
Polecats were not cleaned up after previous work sessions. This is exactly why we need:
- gt-u1k: gt shutdown should fully cleanup polecats
- gt-8v8: Refuse to lose uncommitted work
- gt-9nf: Always create fresh polecats


Merge: gt-g44u.3

branch: polecat/Ace
target: main
source_issue: gt-g44u.3
rig: gastown


bd ready --type: missing type filter for MQ integration

bd ready lacks --type flag that engineer.go expects.

## Code (internal/refinery/engineer.go)
readyMRs, err := e.beads.ReadyWithType("merge-request")

## Actual bd ready
No --type flag - only supports assignee, label, priority filters.

## Impact
Refinery can't find merge-requests in queue, so MQ doesn't process anything.

## Fix Options
1. Add --type flag to bd ready
2. Use bd list --type=merge-request --status=open instead
3. Both (ready filters for unblocked, list for all)

This is blocking the entire MQ pipeline.


Worker prompting: Beads write access

Add beads write access section to polecat AGENTS.md.template.

## Beads Access Section for Prompting

```markdown
## Beads Access

You have **full beads access** - create, update, and close issues.

### Quick Reference

```bash
# View work
bd ready                    # Issues ready (no blockers)
bd list                     # All open issues
bd show <id>                # Issue details

# Create issues
bd create --title="Fix bug" --type=bug --priority=2
bd create --title="Add feature" --type=feature

# Update issues
bd update <id> --status=in_progress    # Claim work
bd close <id>                          # Mark complete

# Sync (required before merge!)
bd sync                     # Commit beads changes to git
```

### When to Create Issues

Create beads issues when you discover work that:
- Is outside your current task scope
- Would benefit from tracking
- Should be done by someone else

**Good examples**:
```bash
bd create --title="Race condition in auth" --type=bug --priority=1
bd create --title="Document API rate limits" --type=task --priority=3
```

**Don't create for**:
- Tiny fixes you can do in 2 minutes
- Vague "improvements" with no scope
- Work already tracked elsewhere

### Beads Sync Protocol

**CRITICAL**: Always sync beads before merging!

```bash
bd sync                    # Commits beads changes
git add .beads/
git commit -m "beads: sync"
```

If you forget to sync, beads changes are lost when session ends.
```

## Implementation

Add to AGENTS.md.template polecat section.


Witness patrol: cleanup idle orphan polecats

Add patrol step to find and cleanup polecats that are idle with no assigned issue. These orphans occur when polecats crash before sending DONE or Witness misses the message. Patrol should verify git is clean before removing worktree. Part of gt-rana.


context-check

Assess own context usage. If high, prepare for handoff.


Test issue for spawn molecule


CloudRun persistent connections: HTTP/2 keepalive

## Overview

Implement persistent HTTP/2 connections to keep Cloud Run containers warm.

## Problem

Cloud Run has cold start latency when scaling from 0. Persistent connections keep containers warm.

## Implementation

```go
type PersistentConnectionManager struct {
    serviceURL string
    conn       net.Conn
    client     *http2.ClientConn
    mu         sync.Mutex
    lastUsed   time.Time
    keepAlive  time.Duration
}

func (m *PersistentConnectionManager) GetConnection() (*http2.ClientConn, error) {
    m.mu.Lock()
    defer m.mu.Unlock()

    // Reuse existing connection if healthy
    if m.client != nil && m.client.CanTakeNewRequest() {
        m.lastUsed = time.Now()
        return m.client, nil
    }

    // Create new connection
    return m.dial()
}

func (m *PersistentConnectionManager) keepAliveLoop() {
    ticker := time.NewTicker(m.keepAlive / 2)
    for range ticker.C {
        m.mu.Lock()
        if time.Since(m.lastUsed) > m.keepAlive {
            // Connection idle too long, close it
            m.close()
        } else {
            // Send ping to keep alive
            m.ping()
        }
        m.mu.Unlock()
    }
}
```

## Integration with CloudRunOutpost

```go
type CloudRunOutpost struct {
    // ...existing fields...
    connMgr *PersistentConnectionManager
}

func (o *CloudRunOutpost) Spawn(...) {
    conn, err := o.connMgr.GetConnection()
    // Use connection for work dispatch
}
```

## Config

```yaml
outposts:
  - name: cloudrun-burst
    type: cloudrun
    # ...
    keep_alive: 5m  # Keep connection warm for 5 minutes
```

## Files

- `internal/cloudrun/connection.go`

## Dependencies

Depends on: gt-9a2.8 (basic CloudRunOutpost)


TIDY UP: Your previous work (patrol runner) was already m...

TIDY UP: Your previous work (patrol runner) was already merged to main. Check your git status is clean, sync beads, and if nothing to do, just run 'gt done'.


Work assignment messages should auto-close on completion

When a polecat completes work on an issue, the work assignment message (msg-type:task) stays open. Found 7 stale work assignments in gastown after swarm completed.

Proposal: When bd close is called on an issue, auto-close any work assignment messages that reference that issue in their body.

Alternative: Work assignment messages could use a different lifecycle - perhaps they should be acked (closed) when the polecat starts working, not when they finish.


Molecule schema: YAML format for workflow definitions

Define the YAML schema for molecule definitions:

```yaml
molecule: <name>
version: 1
description: "Human description"
steps:
  - id: <step-id>
    title: "Step title"
    prompt: "Instructions for agent"
    depends: [<other-step-ids>]  # optional
    tier: haiku|sonnet|opus      # optional, default from config
    timeout: 30m                 # optional
```

Store molecules in:
- `<rig>/molecules/<name>.yaml` for rig-specific
- `<town>/molecules/<name>.yaml` for town-wide

Built-in molecules to ship:
- engineer-in-box: design→code→review→test→submit
- quick-fix: implement→test→submit
- research: investigate→document


Mayor session cycling prompting

Add session cycling section to Mayor CLAUDE.md template.

## When to Cycle

Cycle proactively when:
- Running for several hours
- Context feels crowded (losing track of earlier state)
- Major phase completed
- About to start complex new work

## Composing Handoff Notes

1. Gather information:
   town status    # Overall health
   town rigs      # Each rig state
   town inbox     # Pending messages
   bd ready       # Work items

2. Compose note with this structure:

[HANDOFF_TYPE]: mayor_cycle
[TIMESTAMP]: <current time>
[SESSION_DURATION]: <how long running>

## Active Swarms
<per-rig swarm status>

## Rig Status
<table of rig health>

## Pending Escalations
<issues needing your decision>

## In-Flight Decisions
<decisions being made>

## Recent Actions
<last 5-10 things you did>

## Delegated Work
<work sent to refineries>

## User Requests
<pending user asks>

## Next Steps
<what next session should do>

## Warnings/Notes
<critical info for next session>

3. Send handoff:
   town mail send mayor/ -s "Session Handoff" -m "<note>"

4. End session - next instance picks up from handoff.


CLI: spawn command

High-level command to spawn a polecat with work assignment.

## Command

```
gt spawn <rig>/<polecat> --issue <id>
gt spawn <rig> --issue <id>  # auto-select available polecat
gt spawn <rig>/<polecat> -m "Work on X"  # free-form task
```

## What It Does

1. Select or create polecat
2. Ensure polecat is in idle/active state
3. Assign the issue (update beads, set polecat state)
4. Start session (gt session start)
5. Inject initial context

## Options

- `--issue <id>`: Beads issue to assign
- `-m "message"`: Free-form work description
- `--create`: Create polecat if it does not exist
- `--no-start`: Assign work but do not start session

## Auto-Select Logic

If polecat not specified:
1. Look for idle polecats in rig
2. Prefer ones that worked on similar issues before
3. If none available, fail (or create if --create)

## Initial Context

Injects into session:
```
[SPAWN] You have been assigned: <issue-title>
Issue: <id>
Priority: <priority>

<description>

Work on this issue. Signal DONE when complete.
```

## Implementation

Orchestrates PolecatManager + SessionManager + Beads:
```go
func Spawn(rig, polecat, issue string, opts SpawnOptions) error
```


Create DEACON.md role context

Create ~/gt/DEACON.md with the Deacon's role context, wake cycle instructions, and command reference. Model after existing CLAUDE.md for Mayor.


implement

Implement the solution for gt-test. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


Work on ga-xxp: Define mol-polecat-work standard molecule...

Work on ga-xxp: Define mol-polecat-work standard molecule. See bd show ga-xxp for full details.


Add agent abstraction layer to support non-Claude agents

Currently Gas Town hardcodes 'claude --dangerously-skip-permissions' throughout the codebase for spawning agents. We should add an abstraction layer to support other AI agents (e.g., Gemini CLI, OpenAI agents, local models).

Locations that spawn Claude:
- internal/cmd/mayor.go:131
- internal/cmd/deacon.go:150
- internal/cmd/witness.go:280
- internal/cmd/crew.go (multiple locations)
- internal/cmd/up.go:190, 229
- internal/session/manager.go:146
- internal/refinery/manager.go:207

Suggested approach:
1. Create an agent package with an interface
2. Add configuration for agent type in town/rig config
3. Replace hardcoded claude commands with agent.Spawn() calls
4. Support agents: claude, gemini, openai, local (ollama, etc.)


Molecule format bridge: convert embedded markdown to child issues

## Problem

Two molecule formats exist:
1. **Old (gastown builtin)**: Steps embedded as markdown in Description field, parsed by ParseMoleculeSteps()
2. **New (bd mol)**: Steps as child issues in proper beads DAG

The daemon's InstantiateMolecule() uses the old format. bd mol spawn uses the new format.

## Options

### Option A: Require child issues (new format)
- Update daemon to use bd mol spawn instead of InstantiateMolecule
- Deprecate embedded markdown format
- Pro: One format, simpler
- Con: Breaking change for existing molecules

### Option B: Build a bridge
- In InstantiateMolecule, detect format:
  - If Description has ## Step: markers → parse to child issues
  - If issue has children with template label → use directly
- Convert old format to new format on instantiation
- Pro: Backward compatible
- Con: More complexity

## Recommendation

Option B - build the bridge. On instantiation, convert markdown steps to child issues. This unifies execution while preserving authoring flexibility.


Add unit tests for daemon package

The daemon package has no unit tests. Need tests for:
- Config and state serialization
- Session name pattern matching (isWitnessSession)
- Lifecycle request parsing
- Identity to session mapping


Merge: gt-3x1.4

branch: polecat/Nux
target: main
source_issue: gt-3x1.4
rig: gastown


Self-test

Testing gt mail works


Molecules: Composable Workflow Beads

## Summary

Molecules are crystallized workflow patterns stored as Beads issues.
When instantiated, the molecule creates child beads forming a DAG.

## Key Insight: Molecules ARE Beads

Per HOP Decision 001: Beads IS the ledger. Molecules don't get a separate YAML format - they're issues with `type: molecule` containing prose-based step definitions.

Agents don't need rigid schemas. They parse natural language natively. A molecule is just instructions with enough structure for tooling.

## Example: Engineer in a Box

```markdown
id: mol-xyz
type: molecule
title: Engineer in a Box

This workflow takes a task from design to merge.

## Step: design
Think carefully about architecture. Consider existing patterns,
trade-offs, testability.

## Step: implement
Write clean code. Follow codebase conventions.
Needs: design

## Step: review
Review for bugs, edge cases, style issues.
Needs: implement

## Step: test
Write and run tests. Cover happy path and edge cases.
Needs: implement

## Step: submit
Submit for merge via refinery.
Needs: review, test
```

## Instantiation

```bash
# Attach molecule when spawning
gt spawn --issue gt-abc --molecule mol-xyz

# Creates child beads atomically:
gt-abc.design     ← ready first
gt-abc.implement  ← blocked by design
gt-abc.review     ← blocked by implement
gt-abc.test       ← blocked by implement
gt-abc.submit     ← blocked by review, test
```

Each step issue gets an `instantiated-from` edge to the molecule (with step metadata).

## Why This Matters

1. **Unified data plane**: Everything in Beads, no parallel YAML channel
2. **AI-native**: Prose instructions, not rigid schemas
3. **Error isolation**: Each step is a checkpoint - failure doesn't lose progress
4. **Scales with AI**: As agents get smarter, they handle more complex molecules

## Implementation Primitives

- `ParseMoleculeSteps()`: Extract steps from prose (convention-based)
- `InstantiateMolecule()`: Atomic transaction creating all steps + edges
- `instantiated-from` edge type: Track provenance
- Parameterization: `{{variable}}` substitution from context map


test with labels


Hook system for event extensibility

GGT needs hook system for extensibility like PGT.

## Event Types
```go
type Event string
const (
    EventPreSessionStart  Event = "pre-session-start"
    EventPostSessionStart Event = "post-session-start"
    EventPreShutdown      Event = "pre-shutdown"
    EventPostShutdown     Event = "post-shutdown"
    EventOnPaneOutput     Event = "on-pane-output"
    EventSessionIdle      Event = "session-idle"
    EventMailReceived     Event = "mail-received"
    EventWorkAssigned     Event = "work-assigned"
)
```

## Hook Configuration
File: .claude/hooks.json or .gastown/hooks.json
```json
{
  "hooks": {
    "pre-shutdown": [
      {"type": "command", "cmd": "./scripts/pre-shutdown.sh"}
    ],
    "on-pane-output": [
      {"type": "command", "cmd": "./scripts/activity-monitor.sh"}
    ]
  }
}
```

## Hook Types
1. **Command**: Execute external script
2. **Built-in**: Internal Go functions (pre-shutdown checks)

## Hook Interface
```go
type HookRunner struct {
    config *HookConfig
}

type HookResult struct {
    Success bool
    Message string
    Block   bool  // For pre-* hooks: should operation be blocked?
}

func (r *HookRunner) Fire(event Event, ctx *HookContext) []HookResult
```

## CLI Commands
```
gt hooks list [<event>]    # List registered hooks
gt hooks fire <event>      # Manually fire for testing
gt hooks test [--all]      # Validate hook config
```

## Integration Points
- internal/session/manager.go: Fire pre/post session hooks
- internal/mail/router.go: Fire mail-received hook

## New Package
internal/hooks/
├── types.go    # Event, HookConfig, HookResult
├── runner.go   # HookRunner, Fire()
└── builtin.go  # Built-in hooks (pre-shutdown checks)

## PGT Reference
gastown-py/src/gastown/hooks/

## Acceptance Criteria
- [ ] Hook config loading from JSON
- [ ] Command hooks execute subprocess
- [ ] Pre-shutdown hook integration with session stop
- [ ] CLI for listing and testing hooks


Enhanced polecat decommission prompting

Add decommission checklist to polecat AGENTS.md.template. Make crystal clear: verify ALL before signaling done.

## Checklist for AGENTS.md.template

```markdown
## Decommission Checklist

**CRITICAL**: Before signaling done, you MUST complete this checklist.
The Witness will verify each item and bounce you back if dirty.

### Pre-Done Verification

```bash
# 1. Git status - must be clean
git status
# Expected: "nothing to commit, working tree clean"

# 2. Stash list - must be empty
git stash list
# Expected: (empty output)

# 3. Beads sync - must be up to date
bd sync --status
# Expected: "Up to date" or "Nothing to sync"

# 4. Branch merged - your work must be on main
git log main --oneline -1
git log HEAD --oneline -1
# Expected: Same commit
```

### If Any Check Fails

- **Uncommitted changes**: Commit them or discard if unnecessary
- **Stashes**: Pop and commit, or drop if obsolete
- **Beads out of sync**: Run `bd sync`
- **Branch not merged**: Complete the merge workflow

### Signaling Done

Only after ALL checks pass:

```bash
bd close <issue-id>
bd sync
town mail send <rig>/witness -s "Work Complete" -m "Issue <id> done."
```
```

## Implementation

Add to AGENTS.md.template in the polecat prompting section.


Adaptive backoff for daemon heartbeat

Track agent responsiveness and adjust heartbeat frequency.

## Per-Agent State

```go
type AgentBackoff struct {
    BaseInterval    time.Duration  // 60s default
    CurrentInterval time.Duration  // grows when busy
    MaxInterval     time.Duration  // 10min cap
    ConsecutiveMiss int            // pokes with no response
}
```

## Strategy Options

- **Fixed**: Always 60s (current, simple)
- **Geometric**: 60s → 90s → 135s → 202s (factor 1.5)
- **Exponential**: 60s → 120s → 240s (factor 2, aggressive)

## Recovery

When agent responds (runs a command):
- Reset ConsecutiveMiss to 0
- Return to BaseInterval immediately

## Benefits

- Reduces noise for busy agents
- Saves resources during quiet periods
- Still catches stuck agents (max interval cap)


gt spawn should auto-start refinery/witness if not running

When spawning a polecat, the infrastructure (refinery, witness) should already be running.

## Current Behavior
spawn.go only:1. Assigns issue to polecat2. Sends work mail3. Starts polecat session

The refinery and witness must be started separately.

## Expected Behavior (per user feedback)
When spawning a polecat, if the rig's refinery or witness is not running, auto-start them.

## Options

### Option A: spawn auto-starts infrastructure
Check if refinery/witness running before spawn, start if not.

### Option B: gt swarm start <rig> command
Explicit command that:
1. Starts refinery
2. Starts witness
3. Optionally spawns polecats on bd ready issues

### Option C: gt rig start <rig>
Similar to Option B but as rig lifecycle command.

## Related
- gt-n7z7: refinery --foreground race condition bug
- gt-u1j.18: witness CLI commands


Mail system: JSONL inbox, delivery, tmux injection

Refactor mail system to wrap bd mail commands.

## Status

Current implementation uses JSONL files directly. Now that Beads mail is available (gt-r01 closed), refactor to use bd mail as the backend.

## Implementation

Replace internal/mail/* with thin wrappers around bd CLI:

```go
// Send wraps: bd mail send <to> -s <subject> -m <body>
func (r *Router) Send(msg *Message) error

// List wraps: bd mail inbox --json
func (m *Mailbox) List() ([]*Message, error)

// Get wraps: bd mail read <id> --json
func (m *Mailbox) Get(id string) (*Message, error)

// MarkRead wraps: bd mail ack <id>
func (m *Mailbox) MarkRead(id string) error
```

## Address Translation

GGT addresses → Beads recipients:
- `mayor/` → `mayor`
- `<rig>/refinery` → `<rig>-refinery`
- `<rig>/<polecat>` → `<rig>-<polecat>`

## Tmux Notification

Keep the tmux injection for --notify flag. After bd mail send, optionally inject notification into tmux session.

## Migration

No migration needed - bd mail creates messages as beads issues with type=message. Old JSONL inboxes can be ignored or cleaned up.

## Dependencies

- gt-r01: CLOSED (Beads mail available)
- gt-u1j.4: Tmux wrapper (for notifications)


mol-polecat-work

Full polecat lifecycle from assignment to decommission.

This proto enables nondeterministic idempotence for polecat work.
A polecat that crashes after any step can restart, read its molecule state,
and continue from the last completed step. No work is lost.

Variables:
- gt-test123 - The source issue ID being worked on


Per-rig beads repo configuration

Add per-rig beads configuration to rig config schema.

## Config Schema

In each rig's config.json:

```json
{
  "version": 1,
  "name": "wyvern",
  "git_url": "https://github.com/steveyegge/wyvern",
  "beads": {
    "repo": "local",    // "local" | "<path>" | "<git-url>"
    "root": null,       // Override bd --root (optional)
    "prefix": "wyv"     // Issue prefix for this rig
  }
}
```

## Repo Options

| Value | Meaning | Use Case |
|-------|---------|----------|
| `"local"` | Use project's `.beads/` | Own projects, full commit access |
| `"<path>"` | Use beads at path | OSS contributions |
| `"<git-url>"` | Clone and use repo | Team shared beads |

## Environment Injection

When spawning polecats, Gas Town sets:
```bash
export BEADS_ROOT="<resolved-path>"
```

## Resolution Logic

```go
func ResolveBeadsRoot(rigConfig *RigConfig, rigPath string) (string, error) {
    beads := rigConfig.Beads
    switch {
    case beads.Root != "":
        return beads.Root, nil
    case beads.Repo == "local" || beads.Repo == "":
        return filepath.Join(rigPath, ".beads"), nil
    case strings.HasPrefix(beads.Repo, "/"):
        return beads.Repo, nil
    case strings.Contains(beads.Repo, "://"):
        return cloneAndResolve(beads.Repo)
    default:
        return filepath.Join(rigPath, beads.Repo), nil
    }
}
```

## Backwards Compatibility

If `beads` section missing, assume `"repo": "local"`.


Phase 3: Callbacks and plugins

Mail-based callback protocol and plugin surface.

## Callbacks
- Polecat → Witness: shutdown requests
- Witness → Deacon: escalations, status
- Crew → Deacon: recycle requests
- Deacon → Mayor: escalations

## Plugins
- .beads/plugins.yaml registry
- Cooldown tracking
- Plugin runner in deacon patrol

Depends: Phase 2


Witness role template + CLAUDE.md

Create the Witness agent's role context:

1. internal/templates/roles/witness.md.tmpl
   - Witness responsibilities (polecat lifecycle)
   - Core loop description
   - Commands available (gt polecats, bd ready, etc)
   - Escalation protocol

2. Generate CLAUDE.md for witness/ directories
   - Context about the rig
   - Mail address: <rig>/witness
   - Startup protocol (gt prime, check inbox)

The Witness is the per-rig 'pit boss' - NOT a global coordinator. It manages polecats for ONE rig only.


Patrol step: check parked molecules for unblock

Add patrol step to Deacon for checking parked molecules:

```yaml
- step: check-parked-molecules
  action: |
    For each molecule with:
      - status: in_progress
      - assignee: null
      - has step with external: blocked_by
    Check if external deps are now satisfied.
    If yes: spawn polecat to resume the molecule.
```

This automates the resume process - no manual intervention needed when
upstream dependencies ship.

Part of cross-project dependency system.
See: docs/cross-project-deps.md

Depends on: gt-in3x (spawn --continue)
Priority: P3 (future automation, not required for launch)


Test merge request

branch: polecat/Test/gt-test
target: main
source_issue: gt-test
worker: TestWorker
rig: gastown


Test message

Testing GGT mail system


Deacon Kernel: event processing molecule architecture

Extend the Deacon from "health orchestrator" to "event processing kernel" that runs a
molecule (rounds) each wake cycle, like an OS kernel scheduler.

## Core Insight

The Deacon already has:
- Wake cycle (daemon poke, timer, lifecycle request)
- Mail as event queue
- Health scanning
- Lifecycle processing

But it is REACTIVE. This epic makes it PROACTIVE with a structured molecule:

```
Deacon Wake
├── Step 0: Session Check (should I cycle myself?)
├── Step 1: Health Scan (Mayor, Witnesses, Crew, Refineries)
├── Step 2: Lifecycle Processing (cycle/restart/shutdown requests)
├── Step 3: Plugin Execution (scheduled, event-triggered, human-requested)
├── Step 4: Event Callbacks (timers, subscriptions)
└── Step 5: Heartbeat + Wait
```

## Key Design Decisions

1. **Session cycling first** - Token costs are quadratic with session length.
   Deacon should aggressively cycle to fresh sessions. First step of every
   wake is "do I need a new session?" based on context budget.

2. **Pinned bead with marching orders** - A pinned bead (like gt prime for
   agents) defines the Deacon's rounds molecule. This is the Deacon's
   "kernel" - its operating loop.

3. **Keepalive file for daemon quieting** - Instead of daemon tmux-poking
   the Deacon (which interrupts work), Deacon writes a keepalive file.
   Daemon reads it and backs off. Worst case: Deacon forgets, gets one
   extra heartbeat it squelches.

4. **Molecule-based rounds** - The wake cycle becomes a molecule with steps.
   Each step can have plugins (inline attention). Steps can be added/modified
   by updating the pinned bead.

## Architecture

```
Go Daemon (minimal, dumb)
├── Reads {townRoot}/deacon/keepalive.json
├── If fresh: do nothing
├── If stale: poke Deacon (fallback)
└── Process lifecycle requests (still daemon's job)

Deacon (Claude agent, smart)
├── Wakes: poke, timer, mail event
├── Writes keepalive (quiets daemon for duration of rounds)
├── Runs rounds molecule:
│   ├── session-check: cycle if context budget low
│   ├── health-scan: check agents, remediate
│   ├── lifecycle: process requests
│   ├── plugins: run scheduled/triggered plugins
│   ├── events: process timer/event callbacks
│   └── complete: update heartbeat, wait
└── Reads marching orders from pinned bead
```

## Relation to Existing Work

- Extends gt-5af (Deacon infrastructure) - CLOSED
- Relates to gt-axz (Plugin architecture) - P3
- Fits into phase3-deacon of gt-ngpz (Christmas Plan)
- Enables gt-976 (Crew lifecycle) as part of health-scan step


Document bd mol bond/squash/burn CLI

Create CLI reference documentation for molecule commands:

## bd mol bond

Instantiate a proto into a runnable molecule.

```bash
bd mol bond <proto-id> [--wisp] [--assignee=<addr>]
```

- Default: creates a Mol (durable, in main beads)
- --wisp: creates a Wisp (ephemeral, in .beads-ephemeral/)
- --assignee: who will execute this molecule

## bd mol squash

Complete a molecule and generate digest.

```bash
bd mol squash <mol-id> --summary='...'
```

- For Mol: creates digest in git history
- For Wisp: evaporates (no permanent record)
- --summary: required summary of what was accomplished

## bd mol burn

Abandon a molecule without completing.

```bash
bd mol burn <mol-id> [--reason='...']
```

- Discards molecule state
- No digest created
- Use when molecule is no longer needed


Polecat cleanup should refuse to lose uncommitted work

The system should stubbornly refuse to lose work from a polecat.

## Current Problem

- gt spawn --force bypasses safety checks
- gt shutdown doesn't check for uncommitted work
- Witness cleanup doesn't check git status

## Desired Behavior

Before any polecat cleanup, check:
1. git status - any uncommitted changes?
2. git stash list - any stashes?
3. Unpushed commits on branch?
4. Unsynced beads changes?

If ANY of these exist:
- REFUSE to clean up
- Print clear error message listing what would be lost
- Require explicit --nuclear flag to force (not just --force)

## Implementation

Add to cleanupPolecat() in witness/manager.go:
```go
func (m *Manager) checkUncommittedWork(polecatName string) error {
    dir := m.polecatDir(polecatName)

    // Check git status
    if hasUncommitted, _ := git.HasUncommittedChanges(dir); hasUncommitted {
        return fmt.Errorf("polecat %s has uncommitted changes", polecatName)
    }

    // Check stashes
    if stashCount, _ := git.StashCount(dir); stashCount > 0 {
        return fmt.Errorf("polecat %s has %d stashes", polecatName, stashCount)
    }

    // Check unpushed commits
    if unpushed, _ := git.UnpushedCommits(dir); unpushed > 0 {
        return fmt.Errorf("polecat %s has %d unpushed commits", polecatName, unpushed)
    }

    return nil
}
```

## Affected Commands

- gt shutdown
- gt rig shutdown
- Witness cleanup
- gt spawn --force (should warn if overwriting)


gt session restart/status: Complete session management

Add missing session subcommands:

- gt session restart <rig> <polecat> - Restart a session (stop + start)
- gt session status <rig> <polecat> - Show session status details

status should show:
- Running state
- Uptime
- Current activity
- Last output timestamp


Update lifecycle mail targets to deacon/

Update Mayor, Witness, and Crew handoff code to send lifecycle requests to deacon/ instead of daemon/. Update internal/cmd/handoff.go and related code.


Mayor handoff mail template

Add MAYOR_HANDOFF mail template to templates.py.

## Template Function

def mayor_handoff(
    active_swarms: List[SwarmStatus],
    rig_status: Dict[str, RigStatus],
    pending_escalations: List[Escalation],
    in_flight_decisions: List[Decision],
    recent_actions: List[str],
    delegated_work: List[DelegatedItem],
    user_requests: List[str],
    next_steps: List[str],
    warnings: Optional[str] = None,
    session_duration: Optional[str] = None,
) -> Message:
    metadata = {
        'template': 'MAYOR_HANDOFF',
        'timestamp': datetime.utcnow().isoformat(),
        'session_duration': session_duration,
        'active_swarm_count': len(active_swarms),
        'pending_escalation_count': len(pending_escalations),
    }
    # ... format sections ...
    return Message.create(
        sender='mayor/',
        recipient='mayor/',
        subject='Session Handoff',
        body=body,
        priority='high',
    )

## Metadata Fields

- template: MAYOR_HANDOFF
- timestamp: ISO format
- session_duration: Human readable
- active_swarm_count: Number of active swarms
- pending_escalation_count: Number of escalations

## Mail Priority

Use priority='high' to ensure handoff is seen on startup.


Test infrastructure: fixtures, mocks, integration tests

Test infrastructure for Gas Town.

## Test Categories

### Unit Tests
- Config parsing
- Mail operations
- Merge queue operations
- Template rendering

### Integration Tests
- Git operations (uses real git in temp dirs)
- Full workflows (spawn → work → merge)
- CLI command tests

## Fixtures

```go
package testutil

// Creates temp town with minimal structure
func NewTestTown(t *testing.T) *TestTown

// Creates temp rig with git repo
func NewTestRig(t *testing.T, town *TestTown, name string) *TestRig

// Creates test polecat
func NewTestPolecat(t *testing.T, rig *TestRig, name string) *TestPolecat
```

## Mocks

```go
// Mock tmux for session tests (avoid actual tmux)
type MockTmux struct {
    Sessions map[string][]string  // captured send-keys
}

func (m *MockTmux) NewSession(name, dir string) error
func (m *MockTmux) SendKeys(session, keys string) error
func (m *MockTmux) CapturePane(session string, lines int) (string, error)
```

## Test Helpers

```go
// Run test in temp directory
func InTempDir(t *testing.T, fn func(dir string))

// Initialize git repo for testing
func InitGitRepo(t *testing.T, dir string)

// Assert file exists with content
func AssertFileContains(t *testing.T, path, substr string)

// Assert JSON file has field
func AssertJSONField(t *testing.T, path, field string, expected any)
```

## CI Integration

- go test ./... runs all tests
- Integration tests skip with -short flag
- Coverage report generation

## Test Data

Embedded test fixtures:
```go
//go:embed testdata/*
var testdataFS embed.FS
```


tmux notifications: display-message too subtle, use send-keys instead

## Problem

`tmux display-message` notifications are not visible enough - they appear briefly in the status bar and are easy to miss.

## Current Behavior

router.go uses:
```go
r.tmux.DisplayMessageDefault(sessionID, notification)
```

## What Works

Sending echo commands directly to the terminal:
```bash
tmux send-keys -t <session> "echo '📬 NEW MAIL from mayor'" Enter
```

## Proposed Fix

Change notification method to send visible output to the terminal, perhaps with a box/banner:
```
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📬 NEW MAIL from mayor
Subject: <subject>
Run: bd mail inbox
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
```

## Considerations

- This interrupts the terminal output (acceptable for important mail)
- Could check if Claude is mid-response and queue notification
- Or use tmux popup if available

Additional issues:
1. Enter key not sent properly when chained with send-keys
2. Need to debounce and send Enter separately
3. Correct pattern: send text, sleep briefly, then send Enter


Phase 1.3: gt doctor checks for ephemeral health

Add doctor checks for ephemeral beads repo.

## Checks

1. **ephemeral-exists**: .beads-ephemeral/ directory exists for each rig
2. **ephemeral-git**: It's a valid git repo
3. **ephemeral-orphans**: Molecules started but never squashed (>24h old)
4. **ephemeral-size**: Warn if ephemeral repo is >100MB (should be cleaned)
5. **ephemeral-stale**: Molecules with no activity in last hour

## Auto-fix

--fix can:
- Create missing ephemeral repo
- Clean up old completed molecules (already squashed)
- NOT auto-squash incomplete molecules (needs AI summary)


Add --fart as easter egg alias for bd mol bond

Add a hidden alias for the bond command:

```bash
bd mol fart mol-polecat-work --wisp
# equivalent to:
bd mol bond mol-polecat-work --wisp
```

## Context
The fart joke: instantiating a proto can produce either:
- A Mol (solid/substantial output)
- A Wisp (gas/ephemeral output)

## Implementation
- Add 'fart' as an alias in the mol subcommand
- No documentation needed (easter egg)
- Maybe a fun message: 'Bonding molecule...' or similar

Low priority, just for fun.


Crew workers: design documentation and remaining work

## Summary

Crew workers are user-managed persistent workspaces within a rig, distinct from polecats.

## Current Implementation

### Commands (all working)
- `gt crew add <name>` - Create workspace (git clone)
- `gt crew list` - List workspaces with status
- `gt crew at <name>` - Attach to tmux session
- `gt crew remove <name>` - Remove workspace
- `gt crew pristine [<name>]` - git pull + bd sync
- `gt crew refresh <name>` - Context cycle with handoff mail
- `gt crew status [<name>]` - Detailed status
- `gt crew rename <name>` - Rename workspace

### Crew vs Polecat

| Aspect | Crew | Polecat |
|--------|------|---------|
| Lifecycle | User-managed | Witness-managed |
| Scheduling | Manual | `gt spawn` |
| Merge flow | Direct push OK | Integration branch → refinery |
| Garbage collection | Never | Auto on completion |
| Identity | Long-lived (emma, dave) | Ephemeral (Nux, Toast) |

## Known Bugs

- **gt-70b3**: detectSender() doesn't recognize crew workers
- **gt-vdp0**: Crew CLAUDE.md shows Refinery template

## Potential Enhancements

1. Rebase helper in `gt crew pristine` for conflict resolution
2. Cross-rig crew support (crew worker in multiple rigs?)
3. Better mail identity auto-detection for crew


Harness Design & Documentation

The harness (Gas Town installation directory) needs design cleanup, documentation, and tooling.

## Current Problems

1. **Shared harness confusion**: ~/ai is shared by PGT and GGT with overlapping structures
   - PGT uses ~/ai/mayor/ as town-level Mayor home
   - GGT Mayor works in ~/ai/mayor/rigs/gastown/
   - ~/ai/gastown/ has both .gastown/ (PGT) and mayor/ (git clone)

2. **Beads redirect**: ~/ai/.beads/redirect → mayor/rigs/gastown/.beads
   - This is specific to GGT's decentralized structure
   - Should be documented as an example

3. **architecture.md**: Verify rig-level mayor/rig/ is shown correctly

4. **No harness creation tooling**: Users must manually set up

## Proposed Work

- Document what a harness IS (installation directory)
- Create harness creation command or template repo
- Update architecture.md if needed
- Create example harness configuration for docs
- Resolve PGT/GGT sharing issue


Merge: gt-3x0z.2

branch: polecat/nux
target: main
source_issue: gt-3x0z.2
rig: gastown


inbox-check

Handle callbacks from agents. Check gt mail inbox, process lifecycle requests.


Phase 3.1: Summary generation protocol

Define how agents generate summaries for squash.

## The Problem

Beads doesn't make AI calls (inversion of control). Gas Town agents must:
1. Generate their own summary before calling squash
2. Pass summary to bd squash command

## Summary Template

```
Task: <source issue title>
Action: <what was done - fix/implement/refactor/etc>
Outcome: <result - tests pass, committed, needs follow-up, etc>
Details: <1-2 sentences of specifics if needed>
```

## Example

```
Task: Fix lifecycle parser matching bug (gt-rixa)
Action: Reordered conditional checks in parseLifecycleRequest
Outcome: Tests passing, committed to polecat/furiosa
Details: The 'cycle' keyword was matching 'lifecycle:' prefix. Now checks restart/shutdown first, uses word boundary for cycle.
```

## Command

```bash
bd squash eph-abc123 --summary "Task: Fix lifecycle parser..."
```


CLI: session commands (start, stop, at, list, capture, inject)

Session management CLI commands.

## Commands

### gt session start
Start a polecat session.
```
gt session start <rig>/<polecat> [--issue <id>]
```
- Creates tmux session
- Launches claude in polecat workdir
- Optionally injects initial issue context

### gt session stop
Stop a polecat session.
```
gt session stop <rig>/<polecat> [--force]
```
- Graceful shutdown by default
- --force kills immediately

### gt session at (attach)
Attach to running session.
```
gt session at <rig>/<polecat>
```
- Attaches tmux session to current terminal
- Detach with Ctrl-B D

### gt session list
List all sessions.
```
gt session list [--rig <rig>] [--json]
```
- Shows running/stopped status
- Optionally filter by rig

### gt session capture
Capture recent output from session.
```
gt session capture <rig>/<polecat> [--lines <n>]
```
- Default: last 100 lines
- Useful for checking polecat progress

### gt session inject
Send message to session.
```
gt session inject <rig>/<polecat> -m "message"
gt session inject <rig>/<polecat> -f <file>
```
- Injects text via tmux send-keys
- Used for nudges, notifications

## Address Format

`<rig>/<polecat>` e.g., `wyvern/Toast`

## Implementation

Session subcommand group:
```go
var sessionCmd = &cobra.Command{Use: "session"}
sessionCmd.AddCommand(startCmd, stopCmd, atCmd, listCmd, captureCmd, injectCmd)
```


gt mq reject: manual MR rejection

Implement 'gt mq reject <id> --reason "..."' for manual rejection.

Actions:
1. Verify MR exists and is open
2. Close MR with close_reason=rejected
3. Notify worker via mail (optional)
4. Do NOT close source issue (work not done)

Options:
- --reason REASON: required explanation
- --notify: send mail to worker

Reference: docs/merge-queue-design.md#cli-commands


Document merge queue architecture

Update docs/architecture.md with:

- Merge Queue section explaining Beads-native approach
- Engineer role (renamed from Refinery)
- Session restart protocol
- gt mq command reference
- Federation considerations for queue

Also update any references to .gastown/ → config/.


Implement gt sling command

The unified work dispatch command.

```bash
gt sling <thing> <target> [options]
```

Implements spawn + assign + pin in one operation. See sling-design.md.

Acceptance:
- [ ] Parse thing (proto name, issue ID, epic ID)
- [ ] Parse target (agent address)
- [ ] Spawn molecule if proto
- [ ] Assign to target agent
- [ ] Pin to agent's hook (pinned bead)
- [ ] Support --wisp flag for ephemeral
- [ ] Support --molecule flag for issue+workflow
- [ ] Error if hook already occupied (unless --force)


Witness swarm landing protocol

Witness responsibilities for swarm landing cleanup.

## Trigger

Witness receives "swarm-landed" mail from Refinery containing:
- swarm_id
- merge_commit
- action: "cleanup"

## Landing Protocol

### Phase 1: Preflight
Verify all polecat sessions stopped:
- Check tmux for active sessions
- Kill any remaining sessions
- Wait for graceful shutdown

### Phase 2: Git Audit
For each polecat in swarm:
- Check for uncommitted changes
- Check for unpushed commits
- Check for stashes
- Classify as "beads-only" (safe) or "code at risk"
- If code at risk: escalate, abort landing

### Phase 3: Cleanup
For each polecat:
- Clear state entry (mark as idle)
- Delete inbox (or archive)
- Delete worker branch (local + remote)

### Phase 4: Final Report
- Update swarm state to "landed"
- File landing report bead
- Mail Mayor with summary

## Code at Risk Handling

If git audit finds code at risk:
1. Abort cleanup for that polecat
2. Mail Mayor with details
3. Human intervention required

## Reference

PGT: swarm/landing.py (6-phase protocol), swarm/git_audit.py


Phase 3.2: mol-polecat-work squash step

Add summary+squash as final steps in mol-polecat-work.

## Current Steps

1. read-assignment
2. understand-task
3. implement-solution
4. verify-tests
5. commit-work
6. signal-done

## Updated Steps

1. read-assignment
2. understand-task
3. implement-solution
4. verify-tests
5. commit-work
6. **generate-summary** ← NEW
7. **squash-molecule** ← NEW
8. signal-done

## Step Definitions

### generate-summary
Agent writes a concise summary following the template.
Save to a local variable or temp file.

### squash-molecule
Run: bd squash $MOLECULE_ROOT --summary "$SUMMARY"
This creates digest in main beads, cleans ephemeral.

## Update Location

This requires updating the mol-polecat-work definition in beads molecule catalog.


Haiku-based smart stuck detection

Use Haiku to analyze tmux state when signals are ambiguous.

## When to Invoke

Only as escalation tier:
1. Keepalive is stale (> 2 min)
2. Tmux shows claude is running (not idle shell)
3. Heuristics can't determine state

## Prompt

Capture last 50 lines of tmux pane, ask Haiku:
'Is this Claude agent: WORKING | STUCK | IDLE | WAITING_FOR_HUMAN?'

## Cost

~$0.001 per check. At 1 check/min worst case = $0.06/hour.
In practice, most checks avoided by keepalive signal.

## Configuration

```toml
[daemon]
smart_detection = true
smart_model = "haiku"
smart_threshold = "2m"  # only check if stale > 2min
```


Test2

Testing gt mail


Merge: gt-5wb7

branch: polecat/nux
target: main
source_issue: gt-5wb7
rig: gastown


Deacon: Hierarchical health-check orchestrator

Replace daemon heartbeats with Deacon - an AI agent that keeps Gas Town running.

## Core Concept

The Deacon is a **Claude agent** (not just a Go process) that:
- Lives at town root in gt-deacon session
- Has its own mailbox (deacon/ identity in town beads)
- Is poked by a minimal Go daemon every ~60s (if idle)
- Monitors Mayor and Witnesses proactively
- Handles lifecycle requests (restart/cycle) from Mayor, Witnesses, AND Crew

## Architecture

```
Minimal Go Daemon (just watches Deacon)
         |
         v
     Deacon (Claude agent)
         |
    +----+----+
    v         v
  Mayor    Witnesses --> Polecats (Witness-managed)
    |         |
    +----+----+
         |
      Crew (lifecycle only, not monitored)
```

## Deacon Responsibilities

**Proactive monitoring:**
- Mayor health (tmux session, keepalive freshness)
- Witness health (tmux sessions, keepalive freshness)

**Reactive lifecycle:**
- Process restart/cycle requests from Mayor, Witnesses, Crew
- Kill session, create new, prime, verify startup

**Escalation:**
- Mail human (configurable) if issues can't be resolved

## Key Files

- ~/gt/DEACON.md - Role context
- ~/gt/deacon/ - State directory
  - heartbeat.json - Written each wake cycle (daemon checks this)
  - state.json - Health tracking, last scan results
- ~/gt/.beads/ - Town beads with deacon/ mail identity

## Wake Cycle

1. Write heartbeat (prevents daemon from poking)
2. Check mail (lifecycle requests)
3. Quick health scan (Mayor, Witnesses)
4. Process lifecycle requests
5. Remediate unhealthy agents
6. Update state

## Session Patterns

- Deacon: gt-deacon
- Mayor: gt-mayor
- Witness: gt-<rig>-witness
- Crew: gt-<rig>-<name> (e.g., gt-gastown-max)

## Relation to Policy Beads

Future: Deacon behavior configurable via policy beads (gt-3zw).
Initial implementation uses sensible defaults.


gt refinery attach: Attach to refinery session

Add 'gt refinery attach [rig]' command to attach to refinery tmux session.

Mirrors 'gt mayor attach' pattern. If rig not specified, use current rig context.


Ephemeral polecats: spawn fresh, delete on completion

## Design Decision

Switch from pooled/idle polecats to ephemeral model:
- Spawn creates fresh worktree from main
- Polecat requests shutdown when done (bottom-up)
- Witness verifies handoff, kills session, deletes worktree
- No 'idle' state - polecats exist only while working

## Rationale

1. **Git worktrees are fast** - pooling optimization is obsolete
2. **Pooling creates maintenance burden:**
   - Git stashes accumulate
   - Untracked artifacts pile up
   - Branches drift from main
   - Beads DB gets stale
3. **PGT sync problems** came from persistent branches
4. **Support infrastructure exists** - Witness, Refinery, Mayor handle continuity
5. **Simpler mental model** - polecat exists = work in progress

## Lifecycle

```
Spawn:
  gt spawn --issue <id>
  → Creates fresh worktree: git worktree add polecats/<name> -b polecat/<name>
  → Initializes beads in worktree
  → Starts session, assigns work

Working:
  Polecat does task
  → Pushes to polecat/<name> branch
  → Submits to merge queue when ready

Completion (POLECAT-INITIATED):
  Polecat runs: gt handoff
  → Verifies git state clean
  → Sends mail to Witness: "Ready for shutdown"
  → Marks itself done, waits for termination

Cleanup (WITNESS-OWNED):
  Witness receives shutdown request
  → Verifies PR merged or in queue
  → Verifies no uncommitted changes
  → Kills session: gt session stop <rig>/<polecat>
  → Deletes worktree: git worktree remove polecats/<name>
  → Deletes branch: git branch -d polecat/<name>
  → Optionally: Notifies Mayor of completion
```

## Key Insight: Bottom-Up Shutdown

**Old model (wrong)**: Top-down batch shutdown - "cancel the swarm"
**New model (right)**: Bottom-up individual shutdown - polecat requests, Witness executes

This enables streaming:
- Workers come and go continuously
- No "swarm end" to trigger cleanup
- Each worker manages its own lifecycle
- Witness is the lifecycle authority

## Implementation

1. Add `gt handoff` command for polecats to request shutdown
2. Modify gt spawn to always create fresh worktree
3. Run bd init in new worktree (beads needs initialization)
4. Add shutdown request handler to Witness
5. Witness verifies handoff, then cleans up:
   - Kill session
   - Remove worktree
   - Delete branch
6. Remove 'idle' state from polecat state machine
7. Simplify gt polecat list (only shows active)

## Impact on Other Tasks

- gt-17r (Zombie cleanup): Becomes trivial - orphan worktrees
- gt-4my (Worker health): Simpler - no idle/stuck ambiguity
- gt-f9x.5/f9x.6 (Doctor): Fewer states to validate
- gt-eu9 (Witness handoff): Witness receives polecat shutdown requests


Witness pre-kill verification protocol

Add pre-kill verification protocol to Witness CLAUDE.md template.

## Protocol for Witness Prompting

```markdown
## Pre-Kill Verification Protocol

Before killing any worker session, verify workspace is clean.

### Verification Steps

When a worker signals done:

1. **Capture worker state**:
```bash
town capture <polecat> "git status && git stash list && bd sync --status"
```

2. **Assess the output** (use your judgment):
- Is working tree clean?
- Is stash list empty?
- Is beads synced?

3. **Decision**:
- **CLEAN**: Proceed to kill session
- **DIRTY**: Send nudge with specific issues

### Nudge Templates

**Uncommitted Changes**:
```
town inject <polecat> "WITNESS CHECK: Uncommitted changes found. Please commit or discard: <files>. Signal done when clean."
```

**Beads Not Synced**:
```
town inject <polecat> "WITNESS CHECK: Beads not synced. Run 'bd sync' then commit. Signal done when complete."
```

### Kill Sequence

Only after verification passes:
```bash
town kill <polecat>
town sleep <polecat>
```

### Escalation

If worker fails verification 3+ times:
```bash
town mail send mayor/ -s "Escalation: <polecat> stuck" -m "Cannot complete cleanup after 3 attempts. Issues: <list>."
```
```

## Implementation

Add to WITNESS_CLAUDE.md template.


Plugin: Plan-to-Epic converter

## Purpose

Help users create beads epics from various planning inputs.

## Inputs
- Markdown task lists
- GitHub issues
- Linear/Jira exports
- Free-form descriptions
- Existing beads epics

## Output
- Beads epic with properly structured children
- Dependencies set for wave ordering
- Priorities assigned
- Ready for `gt spawn --epic <id>`

## Implementation Options

### Option A: CLI Tool
```bash
gt plan import --from github --repo owner/repo --label batch-candidate
gt plan import --from markdown tasks.md
gt plan structure <epic-id>  # analyze and add dependencies
```

### Option B: Plugin Agent
A plugin at `<rig>/plugins/plan-oracle/` that:
- Receives planning requests via mail
- Analyzes scope and requirements
- Creates structured beads epic
- Sets dependencies based on analysis

### Option C: Interactive Mode
```bash
gt plan create
# Walks through questions, creates epic interactively
```

## Axiom

As stated: 'The Planning phase should end in the creation of a workable Beads plan.'

This plugin bridges the gap between human planning and machine-executable work.

## Priority

P2 - Nice to have for MVP. Manual epic creation works for now.

## Note

No "swarm IDs" - output is just a beads epic with children. Workers process it independently.


gt witness: Witness management commands

Add 'gt witness' command group for witness lifecycle management.

Subcommands:
- gt witness start [rig] - Start witness for a rig
- gt witness stop [rig] - Stop witness
- gt witness status [rig] - Show witness status
- gt witness attach [rig] - Attach to witness session

Witness monitors polecats and handles:
- Idle detection and cleanup
- Session health checks
- Nudging stuck agents


Engineer session restart protocol

Implement session restart flow for when the Engineer needs to split work:

1. Engineer creates subtask(s) in Beads assigned to self
2. Engineer sends handoff mail to self (🤝 HANDOFF)
3. Engineer sends restart request to Witness
4. Witness verifies:
   - Handoff mail exists in Engineer outbox/sent
   - Subtasks filed in Beads
5. Witness restarts the Refinery session (new Engineer context)

This enables "occasionally consistent, eventually convergent" work patterns.
The Refinery continues; the Engineer gets fresh context.


gt mq integration status: show integration branch status

Implement 'gt mq integration status <epic>' command.

Display:
- Integration branch name and creation date
- Commits ahead of main
- MRs merged to integration (closed)
- MRs pending (open, targeting integration)
- Comparison: main..integration/<epic>

Output example:
  Integration: integration/gt-auth-epic
  Created: 2025-12-17
  Ahead of main: 5 commits

  Merged MRs (3):
    gt-mr-001  Fix login timeout
    gt-mr-002  Fix session expiry
    gt-mr-003  Update auth config

  Pending MRs (1):
    gt-mr-004  Update auth tests (in_progress)

Reference: docs/merge-queue-design.md#integration-branches


Test message

Testing GGT mail via beads


Test7

Test with fixed workdir


plugin-run

Execute plugins from ~/gt/plugins/. Check gates, run eligible plugins.


Bubbletea TUI dashboard

Interactive TUI using Charm Bubbletea. Root model, view routing, Lipgloss theme. Includes: dashboard, rig explorer, polecat detail with live tail, mail view, beads view, spawn wizard.


Merge: gt-g44u.1

branch: polecat/Ace
target: main
source_issue: gt-g44u.1
rig: gastown


Implement gt mq CLI commands

Add gt mq subcommands as sugar over bd:

- gt mq submit: Create MR for current branch
- gt mq list: Show open merge requests
- gt mq next: Show next MR ready to process
- gt mq process: Engineer processes the queue
- gt mq reorder <id> --after <x>: Change ordering via deps
- gt mq status <id>: Show MR details

All commands should work with the Beads data plane.


implement

Implement the solution for gt-test123. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


Merge: gt-unrd

branch: polecat/Ace
target: main
source_issue: gt-unrd
rig: gastown


Phase 5.1: Document ephemeral architecture

Update docs with ephemeral molecule architecture.

## Files to Update

### docs/architecture.md
- Add Ephemeral Molecules section
- Diagram: Proto → Ephemeral → Digest flow
- Explain inversion of control for summaries

### docs/molecules.md (new or update)
- Proto molecule catalog
- Ephemeral vs main beads
- Molecule lifecycle
- Summary generation guidelines

### Agent CLAUDE.md files
- Polecat: molecule workflow protocol
- Deacon: patrol cycle pattern
- Witness: patrol cycle pattern
- Refinery: patrol cycle pattern

## Key Concepts to Document

1. Everything is a molecule
2. Orchestration molecules are ephemeral
3. Only digests reach main beads
4. Agents generate their own summaries
5. Crash recovery via ephemeral persistence


Add molecule phase lifecycle diagram to architecture.md

Create a clear lifecycle diagram showing molecule phases:

```
                    ┌─────────────┐
                    │   Proto     │
                    │  (crystal)  │
                    └──────┬──────┘
                           │
                      bd mol bond
                           │
              ┌────────────┴────────────┐
              │                         │
              ▼                         ▼
      ┌───────────────┐        ┌───────────────┐
      │     Mol       │        │    Wisp       │
      │   (liquid)    │        │    (gas)      │
      │   durable     │        │  ephemeral    │
      │  main beads   │        │ .beads-eph/   │
      └───────┬───────┘        └───────┬───────┘
              │                        │
         bd mol squash            bd mol squash
              │                        │
              ▼                        ▼
      ┌───────────────┐        ┌───────────────┐
      │    Digest     │        │   (nothing)   │
      │ (distillate)  │        │  evaporates   │
      │  in git hist  │        └───────────────┘
      └───────────────┘
```

Also document:
- When to use Mol vs Wisp
- Mol: code review waves, epic implementation, feature work
- Wisp: orchestration, polecat work sessions, patrol loops


gt handoff: Deadlock bug in runHandoff

Running 'gt handoff' from a polecat causes a deadlock:

Stack trace shows:
- goroutine 1 [select (no cases)] in runHandoff
- File: internal/cmd/handoff.go:125

The command successfully sends the shutdown request but then hangs with 'fatal error: all goroutines are asleep - deadlock!'


Merge: gt-svi.1

type: merge-request
branch: polecat/Max
target: main
source_issue: gt-svi.1
rig: gastown


Work on gt-fix-bugs: Fix blocking infrastructure bugs. Se...

Work on gt-fix-bugs: Fix blocking infrastructure bugs. See issue for details. Run 'bd show gt-fix-bugs' to see the full issue.


Connection interface: Protocol for local/remote ops

Abstract interface for local vs remote (SSH) operations.

## Concept

Enable Gas Town to manage rigs on remote machines via SSH. The Connection interface abstracts whether operations happen locally or remotely.

## Interface

```go
type Connection interface {
    // Identification
    Name() string
    IsLocal() bool

    // File operations
    ReadFile(path string) ([]byte, error)
    WriteFile(path string, data []byte, perm os.FileMode) error
    MkdirAll(path string, perm os.FileMode) error
    Remove(path string) error
    Stat(path string) (os.FileInfo, error)
    Glob(pattern string) ([]string, error)

    // Command execution
    Exec(cmd string, args ...string) ([]byte, error)
    ExecDir(dir, cmd string, args ...string) ([]byte, error)

    // Tmux (for session management)
    TmuxNewSession(name, dir string) error
    TmuxKillSession(name string) error
    TmuxSendKeys(session, keys string) error
    TmuxCapturePane(session string, lines int) (string, error)
}
```

## Implementations

- LocalConnection (gt-f9x.8): Direct file/exec operations
- SSHConnection (future): Operations via SSH

## Usage

```go
func NewRigManager(conn Connection, ...) *RigManager

// Operations work the same regardless of connection type
rm.DiscoverRigs()  // uses conn.Glob, conn.ReadFile
```

## Design Notes

- Connection obtained from MachineRegistry (gt-f9x.9)
- Default is always local
- SSH connection requires machine config (host, key, user)


HTTP work server: gt worker serve command

## Overview

HTTP server that runs inside Cloud Run containers, accepting work requests.

## Command

```bash
gt worker serve --port 8080
```

## Implementation

```go
type WorkServer struct {
    port    int
    handler *WorkHandler
}

func (s *WorkServer) ServeHTTP(w http.ResponseWriter, r *http.Request) {
    switch r.URL.Path {
    case "/work":
        s.handleWork(w, r)
    case "/health":
        s.handleHealth(w, r)
    default:
        http.NotFound(w, r)
    }
}

func (s *WorkServer) handleWork(w http.ResponseWriter, r *http.Request) {
    // 1. Parse WorkRequest
    // 2. Clone/pull repo
    // 3. Start Claude on issue
    // 4. Stream WorkEvents as NDJSON
    // 5. Return WorkResult
}
```

## Streaming Response

```go
func (s *WorkServer) streamEvents(w http.ResponseWriter, events <-chan WorkEvent) {
    flusher, _ := w.(http.Flusher)
    encoder := json.NewEncoder(w)
    for event := range events {
        encoder.Encode(event)
        flusher.Flush()
    }
}
```

## Files

- `internal/cloudrun/server.go`
- `cmd/gt/worker_serve.go` - Cobra command

## Dependencies

Depends on: gt-9a2.7 (protocol types)


Phase 2.3: Polecat CLAUDE.md molecule workflow protocol

Update polecat prompting for molecule-based work.

## CLAUDE.md Updates

Add section on molecule workflow:

```markdown
## Molecule Workflow

When assigned a molecule (check gt prime output):

1. Follow molecule steps in order
2. Mark steps complete: bd mol step complete <step-id>
3. Before signaling done:
   a. Generate summary of work performed
   b. Run: bd squash <molecule-root> --summary "<your summary>"
4. Then signal done as normal

### Summary Guidelines

Your summary should include:
- What was the task?
- What did you do?
- What was the outcome?
- Any issues or follow-ups?

Keep it to 2-4 sentences. This becomes the permanent record.
```


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


gt mq status: detailed MR view

Implement 'gt mq status <id>' command for detailed MR view.

Display:
- All MR fields (branch, target, source_issue, worker, rig)
- Current status with timestamps
- Dependencies (what it's waiting on)
- Blockers (what's waiting on it)
- Processing history (attempts, failures)

Under the hood: bd show <id> with MR-specific formatting.

Reference: docs/merge-queue-design.md#command-details


TODO: Check if issue is child of configured epic in Witness

witness/manager.go:688 has a TODO to filter issues by whether they're children of the configured epic. Currently this filter is skipped.


Work on ga-p6r: Add handoff protocol to spawn priming. En...

Work on ga-p6r: Add handoff protocol to spawn priming. Ensure polecats receive handoff context when spawned. When done, submit MR (not PR) to integration branch for Refinery.


Merge: gt-xw7b

branch: polecat/morsov
target: main
source_issue: gt-xw7b
rig: gastown


Refinery background daemon mode

The refinery 'gt refinery start' command only works in foreground mode (--foreground). Need to implement background daemon mode for production use.

Options:
1. Use a separate tmux session for the refinery
2. Implement proper daemonization
3. Use Claude Code session for the refinery agent

For MVP, option 1 (tmux session) is probably simplest.


Fix TestHasPolecat test failure


Fix golangci-lint errcheck warnings (~160 issues)

Running golangci-lint shows ~160 errcheck warnings for unchecked error returns.

Common patterns:
- t.SetEnvironment() return values
- os.WriteFile(), os.RemoveAll()
- MarkFlagRequired() on cobra commands
- Various manager methods

Run: golangci-lint run ./...

Could batch fix with:
1. Add explicit _ = for intentionally ignored errors
2. Handle errors properly where they matter
3. Consider adding //nolint:errcheck for cobra flag setup


Direct landing integration: gt land uses MR or bypasses

Integrate direct landing with merge queue.

'gt land --direct' should:
1. Check if MR exists for the polecat's work
2. If MR exists: process it directly (skip queue)
3. If no MR: create temporary MR, process, close

Options:
- --direct: bypass queue (existing)
- --via-queue: ensure goes through queue (new)
- --force: skip safety checks (existing)

This ensures direct landing still creates proper records.

Reference: docs/merge-queue-design.md#direct-landing-bypass-queue


Document the Propulsion Principle

Write canonical documentation for the Universal Gas Town Propulsion Principle.

Location: gastown/mayor/rig/docs/propulsion-principle.md

Content:
- The One Rule (hook has work → work happens)
- Why it works (stateless agents, molecule-driven)
- The sling lifecycle diagram
- Agent startup protocol
- Examples and anti-patterns

This is foundational theory-of-operation documentation.


Use cmd.OutOrStdout instead of fmt.Print in refinery

refinery/manager.go and refinery/engineer.go use fmt.Print/Println directly for user output (30+ occurrences). This breaks testability and doesn't follow cobra best practices. Should use cmd.OutOrStdout() or pass an io.Writer.

Affected files:
- internal/refinery/manager.go (lines 222, 360-361, 369, 387-393, 519, 537, 672)
- internal/refinery/engineer.go (lines 190-211, 249, 294-297, 325-353, 362-366)


Add deacon/ mail identity support

Ensure deacon/ works as a mail identity in town-level beads. Test with bd mail send deacon/ and bd mail inbox --identity deacon/.


gt spawn: Not injecting work instructions to session

gt spawn starts session but doesn't inject the issue assignment.

Repro:
1. gt spawn gastown/Toast --issue gt-2ux
2. Session starts but polecat just sees Claude prompt
3. No issue context injected

Expected: Polecat should receive issue details automatically.
Actual: Polecat sits at blank prompt, needs manual injection.


MR field parsing: extract structured fields from description

Parse merge-request beads to extract structured fields:
- branch: source branch name
- target: target branch (main or integration/xxx)
- source_issue: the work item being merged
- worker: who did the work
- rig: which rig
- merge_commit: (set on close)
- close_reason: (set on close)

Fields stored in description as YAML block or key: value lines.
Provide helper functions: ParseMRFields(issue) and SetMRFields(issue, fields).

Reference: docs/merge-queue-design.md#merge-request-schema


Simplify Go daemon to Deacon-watcher

Refactor internal/daemon to only: (1) check deacon/heartbeat.json every 60s, (2) poke gt-deacon if stale, (3) restart Deacon and mail for help if very stale. Remove all lifecycle processing and agent poking.


Design: Polecat Beads write access

Design for granting polecats direct beads write access.

## Background

With Beads v0.30.0 tombstone-based rearchitecture, we have solid multi-agent support. Reversing the original read-only decision.

## Benefits

- Simplifies architecture (no mail-based issue filing proxy)
- Empowers polecats to file discovered work
- Beads handles work-disavowal

## Complications

For OSS projects where you cannot commit to project .beads/, need per-rig beads repo configuration.

## Subtasks (implementation)

- gt-zx3: Per-rig beads configuration schema
- gt-e1y: Worker prompting updates for beads access
- gt-cjb: Witness proxy removal
- gt-082: Beads sync in decommission checklist

**Design complete.** Each subtask has full specification in its description.


gt crew add: Create crew workspace

Implement 'gt crew add <name> [--rig <rig>]' command:
- Clone repo into <rig>/crew/<name>/
- Create feature branch (optional, or stay on main)
- Register for mail delivery
- Initialize CLAUDE.md with crew worker prompting
- Do NOT register with witness (user-managed)


Support numeric shortcuts in mail read (e.g., 'mail read 1')

When inbox shows numbered messages like:
* 1. gm-19b29031...  2025-12-16  mayor  Subject...
* 2. gm-19b26d51...  2025-12-16         Subject...

Users should be able to run 'gt mail read 1' instead of needing the full message ID 'gt mail read gm-19b29031f6a172206'.

Implementation:
- Track inbox message order in display
- Map numeric indices to actual message IDs
- Accept both numeric shortcuts and full IDs in 'mail read' command


Implement bd mol bond --ephemeral flag

Add --ephemeral flag to bd mol bond command to support ephemeral molecule bonding.

## Context
Phase 1.2 of Wisp Molecule Integration (gt-3x0z.2) discovered that this flag doesn't exist.

## Requirements

1. Add --ephemeral flag to mol bond command
2. When --ephemeral is set:
   - Mark spawned issues with wisp=true
   - Optionally write to separate .beads-ephemeral/ storage (Phase 2)

## Architecture Reference
See gastown architecture.md lines 487-491 for the full ephemeral storage design.

## Related
- gt-3x0z.2: Configure bd for ephemeral molecule bonding (closed - blocked on this)


bd create should support molecule type

gt molecule commands expect type=molecule but bd validates against bug|feature|task|epic|chore|merge-request only


gt mq submit: create MR from current branch

Implement 'gt mq submit' command that creates a merge-request bead.

Auto-detection logic:
1. Branch: current git branch
2. Issue: parse from branch name (polecat/Nux/gt-xyz → gt-xyz)
3. Target: main (or integration branch if --epic specified)
4. Worker: parse from branch name
5. Rig: current rig

Options:
- --branch BRANCH: explicit source branch
- --issue ISSUE: explicit source issue
- --epic EPIC: target integration/EPIC instead of main
- --priority P: override priority (default: inherit from source issue)

Creates merge-request bead and prints MR ID.

Reference: docs/merge-queue-design.md#creating-merge-requests


CloudRun worker container: Dockerfile and entrypoint

## Overview

Docker container image for Cloud Run workers.

## Dockerfile

```dockerfile
FROM golang:1.21-alpine AS builder
WORKDIR /app
COPY . .
RUN go build -o gt ./cmd/gt

FROM ubuntu:22.04

# Install Claude Code
RUN apt-get update && apt-get install -y     curl git nodejs npm     && npm install -g @anthropic-ai/claude-code     && apt-get clean

# Install gt
COPY --from=builder /app/gt /usr/local/bin/gt

# Worker entrypoint
COPY deploy/cloudrun/entrypoint.sh /entrypoint.sh
RUN chmod +x /entrypoint.sh

EXPOSE 8080
ENTRYPOINT ["/entrypoint.sh"]
```

## Entrypoint

```bash
#!/bin/bash
git config --global user.name "$GIT_USER"
git config --global user.email "$GIT_EMAIL"
exec gt worker serve --port 8080
```

## Files

- `deploy/cloudrun/Dockerfile`
- `deploy/cloudrun/entrypoint.sh`
- `deploy/cloudrun/README.md`

## Dependencies

Depends on: gt-9a2.11 (HTTP server - gt worker serve)


gt spawn --continue for resuming parked molecules

Add `--continue` flag to gt spawn for resuming parked molecules:

```bash
gt spawn --continue gt-mol-root
```

This:
1. Finds molecule root
2. Verifies molecule is in "parked" state (in_progress, no assignee)
3. Checks external deps are now satisfied
4. Spawns polecat with molecule context
5. Polecat reads handoff mail and continues from blocked step

Part of cross-project dependency system.
See: docs/cross-project-deps.md

Depends on: gt-zniu (gt park)
Depends on Beads: bd-zmmy (bd ready resolution)


Auto-target: MRs for epic children target integration branch

Automatically target integration branches for epic children.

When 'gt mq submit' is called:
1. Parse source issue from branch
2. Check if issue has a parent epic
3. Check if integration/<epic> branch exists
4. If yes: set target=integration/<epic>
5. If no: set target=main

This ensures batch work automatically flows to integration branches.

Also update 'gt mq submit --epic' to explicitly target an epic's integration branch.

Reference: docs/merge-queue-design.md#integration-branches


Merge polecat/rictus: Add molecule phase lifecycle diagram

Branch: polecat/rictus

Adds molecule phase lifecycle diagram to architecture.md showing Proto → Mol/Wisp → Digest state transitions with the 'states of matter' metaphor. Also documents when to use Mol (durable) vs Wisp (ephemeral).

Closes: gt-c6zs


Failure handling: assign back to worker, add labels

Handle merge failures appropriately.

Failure types and actions:
| Failure     | Action                                      |
|-------------|---------------------------------------------|
| conflict    | Add needs-rebase label, assign to worker    |
| tests_fail  | Add needs-fix label, assign to worker       |
| build_fail  | Add needs-fix label, assign to worker       |
| flaky_test  | Retry once, then treat as tests_fail        |
| push_fail   | Retry with backoff, escalate if persistent  |

Actions:
1. bd update <id> --status=open --assignee=<worker>
2. bd update <id> --labels=<failure-label>
3. Send mail to worker explaining failure
4. Log failure details

Reference: docs/merge-queue-design.md#handling-failures


MR ID generation: prefix-mr-hash convention

Generate merge-request IDs following the convention: <prefix>-mr-<hash>

Example: gt-mr-abc123 for a gastown merge request.

This distinguishes MRs from regular issues while keeping them in the same namespace.
The hash should be derived from branch name + timestamp for uniqueness.

Implement: GenerateMRID(prefix, branch string) string

Reference: docs/merge-queue-design.md#id-convention


Work on gt-role-template: Refine witness/CLAUDE.md role t...

Work on gt-role-template: Refine witness/CLAUDE.md role template. Add clearer heartbeat protocol, mail checking procedure, nudge decision criteria, escalation thresholds. Run 'bd show gt-role-template' for details.


Pinned Beads: Ongoing concerns and anchors

Pinned beads represent persistent concerns that do not close traditionally. Stay out of bd ready. Examples: Monitor production, Weekly syncs. Implementation: pinned: true field on bead.


CLI: gt refinery commands (start, stop, status, queue)

CLI commands for managing the Refinery agent.

## Commands

```bash
gt refinery start <rig>      # Start refinery for a rig
gt refinery stop <rig>       # Stop refinery
gt refinery status <rig>     # Show refinery status
gt refinery queue <rig>      # Show merge queue
```

## gt refinery start

Starts the Refinery daemon for the specified rig.

Options:
- --foreground: Run in foreground (default: background)
- --auto-merge: Enable auto-merge (default: from config)

## gt refinery stop

Stops a running Refinery. Gracefully finishes current MR if processing.

## gt refinery status

Shows:
- Running state (running/stopped)
- Current MR being processed (if any)
- Queue length
- Last merge time
- Recent activity

## gt refinery queue

Shows the merge queue:
```
Merge queue for 'wyvern':
  1. [pending] Toast/polecat-auth-fix (15m ago)
  2. [pending] Capable/polecat-new-feature (5m ago)

1 merged today, 0 rejected
```

## Implementation

Uses gt-ov2 (Refinery agent) for daemon functionality.


Merge: gt-5af.2

branch: polecat/Doof
target: main
source_issue: gt-5af.2
rig: gastown


CLI: rig commands (list, show, add)

Rig management CLI commands.

## Commands

### gt rig list
List all registered rigs.
```
gt rig list [--json]
```
Output:
- Rig name
- Git URL
- Polecat count
- Witness/Refinery status

### gt rig show
Show details for a specific rig.
```
gt rig show <name> [--json]
```
Output:
- Full rig info
- Polecats with status
- Recent activity
- Beads summary (open issues)

### gt rig add
Add a new rig to the town.
```
gt rig add <name> <git-url>
gt rig add <name> --local <path>
```
Steps:
- Clone repo to town root (or link local)
- Register in rigs.json
- Create agent directories
- Configure git exclude

### gt rig remove
Remove a rig from the town.
```
gt rig remove <name> [--force]
```
- Warns if active polecats
- --force required if uncommitted changes

## Implementation

```go
var rigCmd = &cobra.Command{Use: "rig"}
rigCmd.AddCommand(rigListCmd, rigShowCmd, rigAddCmd, rigRemoveCmd)
```


Phase 2.2: gt prime shows ephemeral molecule context

Update gt prime to detect and display ephemeral molecule state.

## Detection

1. Check for active ephemeral molecule assigned to current identity
2. Parse molecule progress (current step, total steps)
3. Show in prime output

## Output

```
🔧 Polecat furiosa, checking in.

📦 Molecule: mol-polecat-work (eph-abc123)
   Step 3/8: do-work
   Source: gt-rixa
   Started: 10 minutes ago

Run 'bd mol status' for full molecule state.
```


inbox-check

Handle callbacks from agents. Check gt mail inbox, process lifecycle requests.


Refinery semantic merge processing loop

Implement the Refinery semantic merge loop for processing polecat work.

## Overview

The Refinery is a fully empowered Claude Code agent that:
1. Fetches polecat branches
2. Merges to integration branch
3. Resolves conflicts semantically (re-implements if needed)
4. Runs tests
5. Escalates only when truly stuck

## Processing Loop

1. Check queue for completed tasks (polecat done, not yet merged)
2. For each task:
   - Fetch polecat branch
   - Attempt merge to integration/<swarm-id>
   - On conflict: semantic resolution (understand intent, re-implement)
   - Run tests if configured
   - On success: mark merged, file bead, notify witness
   - On failure: notify polecat (test fail) or escalate (stuck)
3. When all tasks merged: land integration to main

## Semantic Merge

When git merge fails, Refinery:
1. Reads polecat changes and beads issue
2. Understands intent
3. Re-implements on current integration branch
4. Only escalates if truly blocked

## Daemon Poking

Refinery is poked by:
- Daemon heartbeat (periodic)
- Witness notification (polecat done)
- Mayor request (check queue)

## Dependencies

Needs: gt-u1j.6 (mail), gt-u1j.3 (git), gt-u1j.14 (merge queue)

## Reference

See PGT ephemeral.py for branch operations.


Witness session cycling and handoff

Add session cycling and handoff protocol to Witness CLAUDE.md template.

## Session Cycling Protocol

```markdown
## Session Cycling

Your context will fill over long swarms. Proactively cycle when:
- Running for many hours
- Losing track of which workers you've checked
- Responses getting slower
- About to start complex operation

### Handoff Protocol

1. **Capture current state**:
```bash
town list .           # Worker states
town all beads        # Pending verifications
town inbox            # Unprocessed messages
```

2. **Compose handoff note**:
```
[HANDOFF_TYPE]: witness_cycle
[TIMESTAMP]: <now>
[RIG]: <rig>

## Active Workers
<list workers and status>

## Pending Verifications
<workers signaled done but not verified>

## Recent Actions
<last 3-5 actions>

## Warnings/Notes
<anything next session should know>

## Next Steps
<what should happen next>
```

3. **Send handoff**:
```bash
town mail send <rig>/witness -s "Session Handoff" -m "<note>"
```

4. **Exit cleanly**: End session, daemon spawns fresh one.

### On Fresh Session Start

1. Check for handoff: `town inbox | grep "Session Handoff"`
2. If found, read it and resume from handoff state
3. If not found, do full status check
```

## Implementation

Add to WITNESS_CLAUDE.md template.


MR state transitions: validate open→in_progress→closed

Enforce valid state transitions for merge-requests:

Valid transitions:
- open → in_progress (Engineer claims MR)
- in_progress → closed (merge success or rejection)
- in_progress → open (failure, reassign to worker)
- open → closed (manual rejection)

Invalid:
- closed → anything (immutable once closed)

Implement validation in MR update operations.

Reference: docs/merge-queue-design.md#state-machine


CLI: mayor commands (start, attach, stop, status)

Mayor management CLI commands.

## Commands

### gt mayor start
```
gt mayor start [--continue] [--agent AGENT]
```
- --continue: Resume from previous session (check for handoff mail)
- --agent: claude (default) or other agent type

### gt mayor attach
```
gt mayor attach
```
Attach to running Mayor session.

### gt mayor stop
```
gt mayor stop [--grace-period N]
```
Stop Mayor session with optional grace period.

### gt mayor status
```
gt mayor status [--json]
```
Show Mayor running status.

## Session Management
Session name: `gt-mayor`
Working directory: `<town>/mayor/rig/` or `<town>/mayor/`

## Implementation
Similar to session commands but for special Mayor context.

```go
func getMayorPath(townRoot string) string {
    return filepath.Join(townRoot, "mayor")
}

func getMayorSessionName() string {
    return "gt-mayor"
}
```

## New File
internal/cmd/mayor.go

## PGT Reference
gastown-py/src/gastown/cli/mayor_cmd.py

## Acceptance Criteria
- [ ] gt mayor start launches Mayor session
- [ ] gt mayor attach works
- [ ] gt mayor stop with grace period
- [ ] gt mayor status shows running state


Test: release command verification


Add Gas Town theory of operation to all role primings

All roles (Mayor, Witness, Refinery, Polecat) should get basic GT architecture context: harness, rigs, agents, mail, beads workflow


GGT vs PGT Gap Analysis Summary

Summary of gaps comparing GGT (~4,500 LOC) to PGT (~27,700 LOC).

## Critical Gaps (P1) - Existing Issues
- gt-u1j.17: Polecat CLI (add, list, wake, sleep) - DETAILED
- gt-u1j.16: Rig CLI (add, list, show, remove) - DETAILED
- gt-u1j.18: Witness CLI (start, stop, status) - DETAILED
- gt-f9x.4: Doctor framework - DETAILED
- gt-f9x.5: Workspace doctor checks - DETAILED
- gt-f9x.6: Rig doctor checks - DETAILED

## Critical Gaps (P1) - New Issues
- gt-a95: Refinery background daemon mode - ENHANCED
- gt-hgk: Mail message types and threading - ENHANCED

## Significant Gaps (P2) - New Issues
- gt-d46: Mail CLI archive/purge/search - ENHANCED
- gt-e9k: Swarm preflight/postflight - ENHANCED
- gt-662: Swarm report generation - ENHANCED
- gt-69l: Hook system - ENHANCED
- gt-3yj: Agent monitoring - ENHANCED
- gt-1ky: Workspace CLI (may overlap f9x.3) - ENHANCED
- gt-9j9: Worker status reporting - ENHANCED
- gt-qao: Mayor CLI - ENHANCED
- gt-7o7: Session pre-shutdown checks - ENHANCED
- gt-c92: Batch all command - ENHANCED
- gt-lno: Swarm state persistence - ENHANCED
- gt-a9y: File locking - ENHANCED
- gt-30o: Error handling improvements - ENHANCED

## Significant Gaps (P2) - Existing Issues
- gt-kmn.12: Ephemeral rig support - DETAILED

## Lower Priority (P3) - New Issues
- gt-3fm: Mail orchestrator daemon - ENHANCED
- gt-2kz: Cleanup commands - ENHANCED
- gt-ebl: Names commands - ENHANCED
- gt-1u9: Interactive prompts - ENHANCED
- gt-8lz: Help text improvements - ENHANCED

## Closed as Duplicates
- gt-3tz → gt-u1j.17 (polecat CLI)
- gt-e1r → gt-u1j.16 (rig CLI)
- gt-86w → gt-f9x.4/5/6 (doctor)
- gt-alx → gt-kmn.12 (ephemeral rigs)

## Execution Order Recommendation
1. P1 CLI commands (existing detailed issues ready to implement)
2. gt-a95: Refinery daemon (blocks autonomous operation)
3. gt-7o7: Pre-shutdown checks (prevents data loss)
4. gt-a9y: File locking (prevents corruption)
5. gt-hgk + gt-d46: Mail improvements
6. gt-69l: Hook system (enables extensibility)
7. Remaining P2s in any order
8. P3s as time permits


Witness Patrol Molecule

Create mol-witness-patrol molecule for witness heartbeat loop.

Similar to DeaconPatrolMolecule but for per-rig witness duties.

## Steps
1. inbox-check - Process witness mail
2. survey-workers - List polecats, check status
3. inspect-workers - Capture pane output, assess state
4. plugin-run - Execute plugins from <rig>/plugins/witness/
5. decide-actions - Determine nudges, escalations
6. execute-actions - Send nudges, process shutdowns
7. context-check - Check own context, handoff if needed
8. loop-or-exit - Continue or cycle

The plugin-run step enables user customization of the patrol loop.


Add crew session pattern to lifecycle handling

Update identityToSession and restartSession to handle crew patterns: gastown/max -> gt-gastown-max. Crew workers can request lifecycle but are not proactively monitored.


Tmux wrapper: session operations

Wrapper for tmux session operations via subprocess.

## Interface

```go
type Tmux struct{}

func NewTmux() *Tmux

// Session lifecycle
func (t *Tmux) NewSession(name, workDir string) error
func (t *Tmux) KillSession(name string) error
func (t *Tmux) HasSession(name string) (bool, error)
func (t *Tmux) ListSessions() ([]string, error)

// Session interaction
func (t *Tmux) SendKeys(session, keys string) error
func (t *Tmux) CapturePane(session string, lines int) (string, error)
func (t *Tmux) AttachSession(session string) error

// Window operations (if needed)
func (t *Tmux) SelectWindow(session string, index int) error
```

## Session Naming

Convention: `gt-<rig>-<polecat>` (e.g., `gt-wyvern-Toast`)

## Implementation

- Shell out to tmux binary
- CapturePane uses `tmux capture-pane -p -t <session> -S -<lines>`
- SendKeys uses `tmux send-keys -t <session> '<keys>' Enter`

## Error Handling

- "no server running": tmux not started (not an error for HasSession)
- "session not found": session doesn't exist
- Wrap all tmux errors with context

## Environment

Requires TMUX_TMPDIR or uses default socket. Don't assume tmux is running.


Work on ga-lzh: Add gt witness attach command. Allow atta...

Work on ga-lzh: Add gt witness attach command. Allow attaching to witness session for a rig, similar to gt mayor attach. When done, submit MR (not PR) to integration branch for Refinery.


Add bulk session stop command (gt session stop --all)

When decommissioning a rig, need to stop multiple sessions one at a time. A --all or --rig flag would allow: gt session stop --rig gastown


Work on gt-o9j: Fix tmux status bar polecat count - exclu...

Work on gt-o9j: Fix tmux status bar polecat count - exclude static roles (mayor, deacon, witnesses, refineries, docs, hop). Run 'bd show gt-o9j' for details.


Slim down rig root config.json to identity only

Rig root config.json should only contain identity:
- type, version, name, git_url, beads.prefix, created_at
- Remove any behavioral config (move to settings/config.json)
- Update RigConfig type to separate identity from settings
- Ensure loader reads identity from root, settings from settings/


Automatic spawn for ready work

Auto-spawn polecats for ready work:

When Witness has capacity (active_workers < max_workers):
1. Query bd ready for unblocked issues
2. Filter to rig-appropriate work (by prefix or epic)
3. For each ready issue up to capacity:
   - gt spawn --issue <id>
   - Track that we spawned for this issue

Configuration (in rig config.json):
- max_workers: 4 (default)
- spawn_delay: 5s between spawns
- auto_spawn: true/false

This enables 'fire and forget' swarming:
- Mayor creates epic with children
- Mayor tells Witness to work epic
- Witness spawns polecats automatically
- Witness cleans up as they complete


MCP beads tools fail from polecat directories

The beads MCP plugin (plugin:beads:beads) fails to find issues when invoked from polecat directories.

## Observed
- Polecat in /gt/gastown/polecats/dementus
- MCP tool: plugin:beads:beads - show (issue_id: 'gt-th7')
- Error: 'bd command failed: Error: no issue found matching gt-th7'

## Expected
MCP tools should work the same as running bd directly.

## Note
This may be related to gt-tmm (beads sync issue) rather than an MCP-specific bug. The MCP tool uses bd under the hood, and bd can't find the issue because the polecat's beads database is stale.


gt crew remove: Remove crew workspace

Implement 'gt crew remove <name> [--force]' command:
- Check for uncommitted changes, unpushed commits
- Warn and require --force if dirty
- Kill any running session
- Remove directory
- Unregister from mail


bd pin command fails: invalid field for update: pinned

In beads v0.32.0, `bd pin <id>` fails with 'invalid field for update: pinned'. The pinned field exists in the schema but update logic doesn't handle it.

Repro:
```
bd create 'test issue'
bd pin <id>
# Error: invalid field for update: pinned
```

Expected: Issue should be pinned.

This blocks gt mail send --pinned from working.


Add gt deacon start/stop/status commands

Add CLI commands: gt deacon start (spawn gt-deacon session), gt deacon stop (kill session), gt deacon status (show health state). Similar to gt mayor commands.


Recreate beads rigs with fresh clones

## Problem

Beads rigs have schema mismatches (missing thread_id column, etc.) from development iteration.

## Tasks

1. Shut down any active polecats
2. Delete existing beads rigs: mayor/rig, refinery/rig, witness/rig, crew/*
3. Re-clone from beads repo
4. Run bd init in each new clone

## Rigs to recreate

- /Users/stevey/gt/beads/mayor/rig
- /Users/stevey/gt/beads/refinery/rig
- /Users/stevey/gt/beads/crew/* (if any)

## Source

Clone from beads repo (need to confirm remote URL)


Phase 2: Quiescent agents (Witness, Refinery)

Enable Witness and Refinery to sleep until triggered.

## Scope
- Wake triggers: gt spawn, MR submit, mail, Deacon ping
- Wake SLA: <1 minute
- mol-witness-patrol and mol-refinery-patrol definitions
- Quiescent entry/exit protocol

## Implementation
- Kill tmux session on quiescent entry
- Preserve sandbox (worktree, state files)
- Restart session on wake trigger
- Agent checks pinned, spawns default patrol if naked

Depends: Phase 1 complete


Beads CLI wrapper: shell out to bd

Wrapper for bd (beads CLI) commands.

## Interface

```go
type Beads struct {
    workDir string
}

func NewBeads(workDir string) *Beads

// Query
func (b *Beads) List(opts ListOptions) ([]*Issue, error)
func (b *Beads) Ready() ([]*Issue, error)
func (b *Beads) Show(id string) (*Issue, error)
func (b *Beads) Blocked() ([]*Issue, error)

// Mutations
func (b *Beads) Create(opts CreateOptions) (*Issue, error)
func (b *Beads) Update(id string, opts UpdateOptions) error
func (b *Beads) Close(ids ...string) error

// Sync
func (b *Beads) Sync() error
func (b *Beads) SyncStatus() (*SyncStatus, error)
```

## Data Types

```go
type Issue struct {
    ID          string
    Title       string
    Status      string
    Priority    int
    Type        string
    Description string
    Parent      string
    Children    []string
    DependsOn   []string
    Blocks      []string
}

type ListOptions struct {
    Status   string  // "open", "closed", "all"
    Type     string
    Priority int
}

type CreateOptions struct {
    Title       string
    Type        string
    Priority    int
    Description string
    Parent      string
}
```

## Implementation

Shell out to bd binary, parse JSON output where available.
```go
func (b *Beads) runBd(args ...string) ([]byte, error) {
    cmd := exec.Command("bd", args...)
    cmd.Dir = b.workDir
    return cmd.Output()
}
```

## Error Handling

- bd not installed: Clear error with install instructions
- Not a beads repo: Detect and report
- Sync conflicts: Parse and report


Update Refinery to use Beads merge queue

Replace branch discovery with Beads queue in the Refinery module:

Current (internal/refinery/manager.go):
- Scans for polecat/* branches
- Creates MR objects on-the-fly

New:
- Pull from Beads: bd ready --type=merge-request
- Process each MR
- Close with merge commit: bd close <id> --reason="Merged at <sha>"
- Handle failures: bd update <id> --status=blocked --reason="..."

The Engineer (agent) becomes Beads-native.
The Refinery (module) provides the infrastructure.


mol-theme-generate: Custom name pool generation via cognition

Currently polecat name themes are hardcoded in namepool.go. Simple theme selection is fine as static config, but custom name generation should be a molecule.

Examples requiring cognition:
- "Generate 50 polecat names in the style of [book/movie/game]"
- "Create names that match the project's domain (medical, financial, etc.)"
- "Extend the mad-max theme with 20 more obscure characters"

## Molecule: theme-generate
Generate custom polecat names for a rig.

## Step: analyze-request
Understand the naming request:
- Theme style or source material
- Number of names needed
- Any constraints (length, format)

## Step: generate-candidates
Generate candidate names matching the style.
Aim for 2x the requested count.

## Step: validate-names
Filter candidates:
- No duplicates with existing themes
- Appropriate length (3-15 chars)
- No problematic terms

## Step: create-theme
Write the custom theme to rig config or beads.
Register in name pool.
Needs: validate-names

## Notes
- Output is a new theme entry in BuiltinThemes equivalent
- Could be stored as a pinned bead for persistence


Add Deacon heartbeat mechanism

Deacon writes deacon/heartbeat.json on each wake. Go daemon reads it to decide whether to poke. Add heartbeat read/write helpers.


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


CLI: names commands for polecat naming pool

Polecat naming pool for auto-generated names.

## Commands

### gt names generate
```
gt names generate [--count N]
```
Generate N names from pool.

### gt names add
```
gt names add <name>...
```
Add custom names to pool.

### gt names list
```
gt names list
```
Show available and used names.

### gt names reset
```
gt names reset [--keep-used]
```
Reset pool to defaults.

## Config File
<rig>/town/naming.json:
```json
{
  "enabled": true,
  "auto_refill": true,
  "refill_threshold": 5,
  "pool": {
    "available": ["Toast", "Nux", "Capable", ...],
    "used": ["Alice", "Bob"]
  }
}
```

## Default Pool
Mad Max themed: Toast, Nux, Capable, Furiosa, Immortan, etc.

## Integration
gt polecat add calls naming pool if no name given:
```go
if name == "" {
    name, err = naming.Generate(rigPath)
}
```

## New Package
internal/naming/
├── pool.go     # Pool management
└── defaults.go # Default name lists

## Acceptance Criteria
- [ ] Auto-generate names on polecat add
- [ ] Track used vs available
- [ ] Auto-refill when low
- [ ] Custom names addable


SwarmManager: create, start, update, query operations

SwarmManager operations for creating and managing swarms.

## Interface

```go
type SwarmManager struct {
    rig    *Rig
    beads  *BeadsWrapper  // shells out to bd CLI
}

func NewSwarmManager(rig *Rig) *SwarmManager

// Lifecycle
func (m *SwarmManager) Create(epicID string, workers []string) (*Swarm, error)
func (m *SwarmManager) Start(swarmID string) error
func (m *SwarmManager) UpdateState(swarmID string, state SwarmState) error
func (m *SwarmManager) Cancel(swarmID string, reason string) error

// Queries (delegate to beads)
func (m *SwarmManager) GetSwarm(id string) (*Swarm, error)
func (m *SwarmManager) GetReadyTasks(swarmID string) ([]SwarmTask, error)
func (m *SwarmManager) GetActiveTasks(swarmID string) ([]SwarmTask, error)
func (m *SwarmManager) IsComplete(swarmID string) (bool, error)
```

## Implementation Notes

- `GetReadyTasks` wraps `bd ready --parent <epicID>`
- `IsComplete` checks if all child issues are closed
- State transitions update the epic's description or a tag field
- No separate manifest files - beads IS the source of truth


Refinery-Witness communication protocol

Define mail protocol between Refinery and Witness:

FROM Witness → Refinery:
- 'Polecat ready': polecat X completed work, ready for merge
- 'Rework complete': polecat Y finished requested rework

FROM Refinery → Witness:
- 'Merge success': polecat X merged, can be cleaned up
- 'Merge failed': polecat X needs rework on <reason>
- 'Rework request': please have a polecat rebase X on current main

Implement as structured mail with parseable format.


Outpost/Worker interfaces: Core abstractions for remote compute

## Overview

Define the core interfaces that all outpost types implement.

## Interfaces

```go
type OutpostType string
const (
    OutpostLocal    OutpostType = "local"
    OutpostSSH      OutpostType = "ssh"
    OutpostCloudRun OutpostType = "cloudrun"
)

type Outpost interface {
    Name() string
    Type() OutpostType
    MaxWorkers() int
    ActiveWorkers() int
    Spawn(issue string, config WorkerConfig) (Worker, error)
    Workers() []Worker
    Ping() error
    SendMail(worker string, msg Message) error  // optional
}

type Worker interface {
    ID() string
    Outpost() string
    Status() WorkerStatus  // idle, working, done, failed
    Issue() string
    Attach() error         // for interactive outposts
    Logs() (io.Reader, error)
    Stop() error
}

type WorkerConfig struct {
    RigPath    string
    BeadsDir   string
    GitBranch  string
    Context    map[string]string  // hints for worker
}
```

## Files

- `internal/outpost/outpost.go` - Outpost interface
- `internal/outpost/worker.go` - Worker interface
- `internal/outpost/config.go` - WorkerConfig, OutpostType

## Notes

This is the foundation for all federation work. Keep interfaces minimal - we can extend later.


Tech Debt: Code Review December 2024

Tech debt identified during code review on 2024-12-21. Contains 11 issues ranging from P2-P4 covering:

- Code duplication (manager creation boilerplate)
- Test coverage gaps (cmd 6.8%, mail 3.6%)
- Magic strings needing constants
- Error handling inconsistencies
- Large files needing splitting
- Unused code removal

Work through these incrementally to improve codebase maintainability.


Test4

test4 body