Session management: start, stop, attach, capture

Polecat session lifecycle management.

## Interface

```go
type SessionManager struct {
    tmux *Tmux
    rig  *Rig
}

func NewSessionManager(tmux *Tmux, rig *Rig) *SessionManager

// Lifecycle
func (sm *SessionManager) Start(polecat string, opts StartOptions) error
func (sm *SessionManager) Stop(polecat string) error
func (sm *SessionManager) IsRunning(polecat string) (bool, error)
func (sm *SessionManager) List() ([]SessionInfo, error)

// Interaction
func (sm *SessionManager) Attach(polecat string) error
func (sm *SessionManager) Capture(polecat string, lines int) (string, error)
func (sm *SessionManager) Inject(polecat string, message string) error

type StartOptions struct {
    WorkDir   string   // defaults to polecat clone dir
    Issue     string   // optional: issue to work on
    Command   string   // optional: override claude command
}

type SessionInfo struct {
    Polecat   string
    SessionID string
    Running   bool
    StartedAt time.Time
}
```

## Session Naming

`gt-<rig>-<polecat>` (e.g., `gt-wyvern-Toast`)

## Start Flow

1. Verify polecat clone exists
2. Check no existing session
3. Create tmux session in polecat workdir
4. Send initial command: `claude` or custom
5. If issue provided, inject initial prompt

## Stop Flow

1. Capture final output (for logging)
2. Send exit/quit command
3. Wait briefly for graceful shutdown
4. Kill session if still running

## Capture

Uses tmux capture-pane to get recent output. Returns last N lines.

## Inject

Sends text to session via tmux send-keys. Used for:
- Mail notifications
- Witness nudges
- User messages


Polecat management: add, remove, list, state

Polecat lifecycle: add, remove, list, state tracking.

## Data Model

```go
type Polecat struct {
    Name      string          `json:"name"`
    Rig       string          `json:"rig"`
    State     PolecatState    `json:"state"`
    ClonePath string          `json:"clone_path"`
    Branch    string          `json:"branch"`
    Issue     string          `json:"issue,omitempty"`
    CreatedAt time.Time       `json:"created_at"`
    UpdatedAt time.Time       `json:"updated_at"`
}

type PolecatState string
const (
    StateIdle       PolecatState = "idle"
    StateActive     PolecatState = "active"
    StateWorking    PolecatState = "working"
    StateDone       PolecatState = "done"
    StateStuck      PolecatState = "stuck"
)
```

## Interface

```go
type PolecatManager struct {
    rig *Rig
    git *Git
}

func NewPolecatManager(rig *Rig, git *Git) *PolecatManager

// Lifecycle
func (pm *PolecatManager) Add(name string) (*Polecat, error)
func (pm *PolecatManager) Remove(name string) error
func (pm *PolecatManager) List() ([]*Polecat, error)
func (pm *PolecatManager) Get(name string) (*Polecat, error)

// State
func (pm *PolecatManager) SetState(name string, state PolecatState) error
func (pm *PolecatManager) AssignIssue(name, issue string) error
func (pm *PolecatManager) ClearIssue(name string) error

// Convenience
func (pm *PolecatManager) Wake(name string) error   // idle → active
func (pm *PolecatManager) Sleep(name string) error  // active → idle
```

## Add Flow

1. Create directory: `<rig>/polecats/<name>/`
2. Clone rig repo into it (or copy from rig root)
3. Create new branch: `polecat/<name>`
4. Initialize polecat state file
5. Create mail inbox

## Remove Flow

1. Verify session not running
2. Check for uncommitted changes (warn/error)
3. Remove directory
4. Clean up state

## State Persistence

Store in `<rig>/polecats/<name>/state.json`


Witness daemon: heartbeat loop, spawn ephemeral agent

Background daemon for agent lifecycle and monitoring.

## Core Responsibilities

1. **Heartbeat monitoring**: Check agent health periodically
2. **Session lifecycle**: Restart agents after handoff (Witness Protection)
3. **Polecat monitoring**: Track worker progress, nudging
4. **Escalation**: Report failures to Mayor

## Session Lifecycle (Witness Protection)

The daemon enables autonomous long-running operation by cycling agent sessions:

```go
type SessionLifecycle struct {
    AgentType string  // "witness", "refinery"
    StatePath string  // path to state.json
}

func (d *Daemon) monitorSessionLifecycle(agent SessionLifecycle) {
    // 1. Detect session exit
    // 2. Check state.json for requesting_cycle: true
    // 3. If cycle requested: start new session, clear flag
    // 4. If unexpected exit: escalate to Mayor
}
```

See architecture.md Key Decision #12: Agent Session Lifecycle.

## Interface

```go
type Daemon struct {
    rig      *Rig
    polecats *PolecatManager
    sessions *SessionManager
    config   DaemonConfig
}

type DaemonConfig struct {
    HeartbeatInterval time.Duration  // default: 30s
    NudgeThreshold    int            // nudges before escalation
    MaxWorkers        int            // from rig config
}

func NewDaemon(rig *Rig) *Daemon
func (d *Daemon) Start() error
func (d *Daemon) Stop() error

// Lifecycle
func (d *Daemon) CycleSession(agentType string) error
func (d *Daemon) SpawnWorker(issueID string) error
func (d *Daemon) ShutdownWorker(polecat string) error
```

## Heartbeat Loop

Every HeartbeatInterval:
1. Check Witness session (restart if cycle requested)
2. Check Refinery session (restart if cycle requested)
3. For each active polecat: assess progress, nudge if stuck
4. Query `bd ready` for new work, spawn up to max_workers


gt shutdown should fully cleanup polecats (worktrees, branches, inboxes)

Current gt shutdown only kills tmux sessions but leaves:

1. Git worktrees in polecats/ directory
2. Polecat branches (polecat/<name>)
3. Inbox messages
4. Beads assignee state

This causes stale polecats to be reused on next startup.

## Expected Behavior

gt shutdown should:
1. Kill all polecat tmux sessions (current behavior)
2. For each polecat with StateIdle or StateDone:
   - Remove worktree
   - Delete branch
   - Clear inbox
3. For polecats with uncommitted work:
   - REFUSE to clean up
   - Report which polecats have uncommitted changes
   - Require --force or --nuclear to proceed

## Current Code

- start.go:runImmediateShutdown() only calls t.KillSession()
- Witness cleanupPolecat() does full cleanup but isn't called by shutdown

## Fix

Either:
1. Call Witness cleanup for each polecat during shutdown
2. OR add rig.ShutdownPolecats() that does the full cleanup


Merge: gt-5af.1

branch: polecat/Ace
target: main
source_issue: gt-5af.1
rig: gastown


Design: Mayor session cycling and handoff

Design for Mayor session cycling and structured handoff.

## Overview

Mayor coordinates across all rigs and runs for extended periods. Needs session cycling pattern with structured handoff notes.

## Key Elements

1. Session cycling recognition (when to cycle)
2. Handoff note format (structured state capture)
3. Handoff delivery (mail to self)
4. Fresh session startup (reading and resuming)

## Subtasks (implementation)

- gt-g2d: Mayor session cycling prompting
- gt-sye: Mayor startup protocol prompting
- gt-vci: Mayor handoff mail template
- gt-1le: town handoff command (optional, P2)

**Design complete.** Each subtask has full specification in its description.


Fix gt prime to give crew workers crew context

gt prime currently gives Mayor context to all agents. Crew workers should get crew-specific context. Also extract shared theory of operation from mayor priming into shared context for all roles.


Daemon: configurable heartbeat interval

Heartbeat interval is hardcoded to 60s. Should be configurable via:
- town.json config
- Command line flag
- Environment variable

Default 60s is reasonable but some deployments may want faster/slower.


Work on ga-y6b: Implement Refinery as Claude agent. Conve...

Work on ga-y6b: Implement Refinery as Claude agent. Convert from shell to Claude agent that processes MRs in merge queue, runs tests, merges to integration branch. When done, submit MR (not PR) to integration branch for Refinery.


Design: Failure modes and recovery

Document failure modes and recovery strategies for Gas Town operations.

## Critical Failure Modes

### 1. Agent Crash Mid-Operation

**Scenario**: Polecat crashes while committing, Witness crashes while verifying

**Detection**:
- Session suddenly gone (tmux check fails)
- State shows 'working' but no session
- Heartbeat stops (for Witness)

**Recovery**:
- Doctor detects via ZombieSessionCheck
- Capture any recoverable state
- Reset agent state to 'idle'
- For Witness: auto-restart via supervisor or manual gt witness start

### 2. Git State Corruption

**Scenario**: Merge conflict, failed rebase, detached HEAD

**Detection**:
- Git commands fail
- Dirty state that won't commit
- Branch diverged from origin

**Recovery**:
- gt doctor reports git health issues
- Manual intervention recommended
- Severe cases: remove clone, re-clone

### 3. Beads Sync Conflict

**Scenario**: Two polecats modify same issue

**Detection**:
- bd sync fails with conflict
- Beads tombstone mechanism handles most cases

**Recovery**:
- Beads has last-write-wins semantics
- bd sync --force in extreme cases
- Issues may need manual dedup

### 4. Tmux Failure

**Scenario**: Tmux server crashes, socket issues

**Detection**:
- All sessions inaccessible
- "no server running" errors

**Recovery**:
- Kill any orphan processes
- tmux kill-server && tmux start-server
- All agent states reset to idle
- Re-spawn active work

### 5. Claude API Issues

**Scenario**: Rate limits, outages, context limits

**Detection**:
- Sessions hang or produce errors
- Repeated failure patterns

**Recovery**:
- Exponential backoff (handled by Claude Code)
- For context limits: session cycling (mail-to-self)
- For outages: wait and retry

### 6. Disk Full

**Scenario**: Clones, logs, or beads fill disk

**Detection**:
- Write operations fail
- git/bd commands error

**Recovery**:
- Clean up logs: rm ~/.gastown/logs/*
- Remove old polecat clones
- gt doctor --fix can clean some cruft

### 7. Network Failure

**Scenario**: Can't reach GitHub, API servers

**Detection**:
- git fetch/push fails
- Claude sessions hang

**Recovery**:
- Work continues locally
- Queue pushes for later
- Sync when connectivity restored

## Recovery Principles

1. **Fail safe**: Prefer stopping over corrupting
2. **State is recoverable**: Git and beads have recovery mechanisms
3. **Doctor heals**: gt doctor --fix handles common issues
4. **Emergency stop**: gt stop --all as last resort
5. **Human escalation**: Some failures need Overseer intervention

## Implementation

- Document each failure mode in architecture.md
- Ensure doctor checks cover detection
- Add recovery hints to error messages
- Log all failures for debugging


Tmux status line: rig color themes and worker identity display

## Summary

Customize tmux status line for Gas Town workers with:
1. Per-rig configurable color themes
2. Clear worker name and role visibility

## Current Problem

- Only mayor shows in status line (and truncated)
- Can't tell which rig/worker you're looking at
- All sessions look the same

## Proposed Design

### Per-rig colors
```yaml
# In rig config or beads
theme:
  primary: '#ff6600'    # Orange for gastown
  secondary: '#333333'
  accent: '#ffcc00'
```

### Status line format
```
[gastown/Rictus] polecat | gt-70b3 | branch: polecat/Rictus
[beads/emma] crew | working | branch: main
[mayor] coordinator | idle
```

### Components
- Rig name with rig color
- Worker name
- Role (polecat/crew/mayor/witness/refinery)
- Current issue or status
- Branch name

## Configuration

Could use pinned beads for this (see gm-w13, beads-6v2):
- `bd show <rig>-theme` returns theme config
- Stored as pinned bead, always available
- Part of 'config in beads data plane' initiative

Implementation complete. Core features: per-rig color themes, dynamic status line with issue/mail indicators, gt theme/issue commands. Ready for testing.


Mayor handoff mail template

Add MAYOR_HANDOFF mail template to templates.py.

## Template Function

def mayor_handoff(
    active_swarms: List[SwarmStatus],
    rig_status: Dict[str, RigStatus],
    pending_escalations: List[Escalation],
    in_flight_decisions: List[Decision],
    recent_actions: List[str],
    delegated_work: List[DelegatedItem],
    user_requests: List[str],
    next_steps: List[str],
    warnings: Optional[str] = None,
    session_duration: Optional[str] = None,
) -> Message:
    metadata = {
        'template': 'MAYOR_HANDOFF',
        'timestamp': datetime.utcnow().isoformat(),
        'session_duration': session_duration,
        'active_swarm_count': len(active_swarms),
        'pending_escalation_count': len(pending_escalations),
    }
    # ... format sections ...
    return Message.create(
        sender='mayor/',
        recipient='mayor/',
        subject='Session Handoff',
        body=body,
        priority='high',
    )

## Metadata Fields

- template: MAYOR_HANDOFF
- timestamp: ISO format
- session_duration: Human readable
- active_swarm_count: Number of active swarms
- pending_escalation_count: Number of escalations

## Mail Priority

Use priority='high' to ensure handoff is seen on startup.


Crew workers getting wrong CLAUDE.md (shows Refinery)

## Problem

Crew workers (emma, dave) have CLAUDE.md that says they're the Refinery.

## Evidence

```
$ head -5 /Users/stevey/gt/beads/crew/emma/CLAUDE.md
# Claude: Beads Refinery
You are the **Refinery** for the **beads** rig...
```

## Expected

Should use crew.md.tmpl which correctly says:
```
# Crew Worker Context
You are a **crew worker** - the overseer's (human's) personal workspace...
```

## Impact

- Crew workers have wrong identity in static context
- `gt prime` correctly outputs crew context, but CLAUDE.md conflicts
- Confusing role information

## Fix

Check `gt crew create` or whatever populates CLAUDE.md for crew workers.


Add bulk session stop command (gt session stop --all)

When decommissioning a rig, need to stop multiple sessions one at a time. A --all or --rig flag would allow: gt session stop --rig gastown


Swarm learning: Session cleanup missing from swarm workflow

## Problem

After Enders Game swarm completed (18 issues merged), 16 polecat sessions were left running but idle. No automated cleanup occurred.

## What Should Happen

1. Witness detects polecat completed work (idle at prompt)
2. Witness verifies git state is clean
3. Witness shuts down session
4. Witness reports completion to Mayor

## GGT Components

- gt-cxx: Witness context cycling (covers self-cycling)
- gt-u1j.9: Witness daemon heartbeat loop
- gt-kmn.6: Witness swarm landing protocol

## Recommendation

Add to Witness responsibilities:
- Monitor for 'work complete' signals (DONE keyword, idle detection)
- Automated session shutdown after verification
- Swarm completion reporting to Mayor

See also: architecture.md 'Worker Cleanup (Witness-Owned)' section which describes this but it wasn't implemented in PGT.


tmux notifications: display-message too subtle, use send-keys instead

## Problem

`tmux display-message` notifications are not visible enough - they appear briefly in the status bar and are easy to miss.

## Current Behavior

router.go uses:
```go
r.tmux.DisplayMessageDefault(sessionID, notification)
```

## What Works

Sending echo commands directly to the terminal:
```bash
tmux send-keys -t <session> "echo '📬 NEW MAIL from mayor'" Enter
```

## Proposed Fix

Change notification method to send visible output to the terminal, perhaps with a box/banner:
```
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📬 NEW MAIL from mayor
Subject: <subject>
Run: bd mail inbox
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
```

## Considerations

- This interrupts the terminal output (acceptable for important mail)
- Could check if Claude is mid-response and queue notification
- Or use tmux popup if available

Additional issues:
1. Enter key not sent properly when chained with send-keys
2. Need to debounce and send Enter separately
3. Correct pattern: send text, sleep briefly, then send Enter


gt spawn: Enter key needs debounce delay after paste

## Problem

When spawning polecats via `gt spawn`, instructions are pasted into tmux but workers often sit idle at prompt because the Enter key arrives before the paste is fully processed.

## Observed Behavior

- Instructions pasted via tmux send-keys
- Enter key sent immediately after
- Worker session shows prompt with no input (paste not submitted)
- Requires manual intervention to nudge workers

## Expected Behavior

- Paste completes fully
- Enter key submits the pasted instructions
- Worker begins executing immediately

## Root Cause

Likely a race condition between paste buffer processing and keypress handling. Need either:
1. Debounce delay before sending Enter
2. Longer delay (Tmax) to ensure paste completes
3. Alternative submission mechanism

## Impact

- Swarm of 10 workers had multiple stalls at startup
- Required manual tmux send-keys to unstick them
- Defeats purpose of automated spawning

## References

- Observed during Mad Max swarm (Dec 18, 2025)
- Affects gt spawn command in internal/cmd/spawn.go


Merge: gt-unrd

branch: polecat/Ace
target: main
source_issue: gt-unrd
rig: gastown


MR: gt-svi.1 (polecat/Furiosa)

branch: polecat/Furiosa
target: main
source_issue: gt-svi.1


/restart: Personal slash command for in-place agent restart

Create ~/.claude/commands/restart.md that restarts current Gas Town agent in place.

## Detection
- Read tmux session name: gt-mayor, gt-witness-*, gt-refinery-*, gt-polecat-*
- Fallback: check GT_ROLE env var

## Behavior by role
- mayor: gt mayor restart (sends Ctrl-C, loop respawns)
- witness: gt witness restart
- refinery: gt refinery restart
- polecat: gt polecat restart (or witness-mediated)

## Command format
Uses backticks for inline bash to detect context, then instructs Claude to run appropriate restart.


Merge: gt-a95

branch: polecat/Ace
target: main
source_issue: gt-a95
rig: gastown


Replaceable notifications via Claude Code queue

Leverage Claude Code's ability to replace queued text for notifications that supersede previous ones.

## Problem

If daemon sends 10 heartbeats while agent is busy, agent returns to see 10 stacked messages. Wasteful and noisy.

## Solution

Use Claude Code's queue replacement for:
- Heartbeat messages (only latest matters)
- Status updates that supersede previous
- Progress notifications

## Implementation

Notifications get a 'slot' identifier. New notification in same slot replaces old one:
- Slot: 'heartbeat' → only one heartbeat queued at a time
- Slot: 'status-<rig>' → latest status per rig
- No slot → stacks normally (for unique messages)

## Research Needed

- How does Claude Code expose queue replacement?
- tmux send-keys behavior with pending input
- Alternative: clear + resend pattern


Test2

Testing gt mail


Layered context onboarding pattern

Pattern from handoff discussion:

## Pattern: Layered Context Onboarding

Town CLAUDE.md (user/org) -> Rig CLAUDE.md (project) -> Role priming

## Ultra-compressed HOP for workers (no reveal)

- Permanent record: All work tracked. Outcomes matter.
- Quality gates: Molecule steps exist for a reason.
- Attribution: Completions build your track record.
- Handoff clean: Leave state any worker can continue.

## Recommendation

Create Town @AGENTS.md for shared worker context that all workers see.
This provides common behavioral guidance without revealing full HOP context.


gt handoff: Deadlock bug in runHandoff

Running 'gt handoff' from a polecat causes a deadlock:

Stack trace shows:
- goroutine 1 [select (no cases)] in runHandoff
- File: internal/cmd/handoff.go:125

The command successfully sends the shutdown request but then hangs with 'fatal error: all goroutines are asleep - deadlock!'


Work assignment mail not received by polecat

When gt spawn sends a work assignment:

1. gt spawn says '✓ Work assignment sent'
2. Polecat runs 'gt mail inbox'
3. Shows '0 messages, 0 unread'

The work assignment mail never arrived at the polecat's inbox.

## Observed in session
- Spawned polecat dementus on gt-th7
- Polecat checked inbox: empty
- Polecat couldn't find issue (separate sync bug)

## Possible causes
- Mail routing issue for polecat addresses
- gt spawn not actually sending mail
- Mail sent to wrong address format

This was likely caused by stale beads in old polecats. With gt-9nf (fresh polecats), polecats now use shared rig beads via redirect file, eliminating sync issues. Mail routing uses town beads correctly.

Fixed by gt-9nf: fresh polecats use shared beads, mail routes correctly to town beads


Molecule converge: iterate until AI says done

Work isn't 'done' until AI is confident it's done. Fixes the 85% problem.

**From VC**: internal/iterative/converge.go - 3-7 iterations with AI convergence detection. ~600 lines.
Target: 20%+ more issues discovered. Observed: ~25% average improvement.

**Gas Town implementation**: Molecule converge config:
```yaml
converge:
  strategy: ai
  min_iterations: 3
  max_iterations: 7
  confidence: 0.85
```

Polecat iterates, AI checks convergence. Stop when AI is confident or max reached.

**Value**: Raw agents get to ~85% and stop. Iteration catches the remaining 15%.

**VC metrics**: Convergence rate >70%, mean 4-5 iterations for complex work.


Work on ga-lue: Implement Witness as Claude agent. Conver...

Work on ga-lue: Implement Witness as Claude agent. Convert from shell script to Claude agent that monitors polecats, nudges idle ones, handles escalations. When done, submit MR (not PR) to integration branch for Refinery.


Merge: gt-g44u.1

branch: polecat/Ace
target: main
source_issue: gt-g44u.1
rig: gastown


Add gt crew rename command


Add molecule to update local go binary on push to main

When pushing to main branch, automatically rebuild and install the gt binary on the local machine so changes are immediately available.


session stop: --force flag is defined but not used


Merge: gt-3x1.5

branch: polecat/Immortan
target: main
source_issue: gt-3x1.5
rig: gastown


Daemon: verify requesting_cycle before kill

Per gt-gby spec, daemon should verify agent state shows requesting_cycle=true before killing session. Currently kills on any lifecycle request without verification.

Requires state.json in agent workspace with requesting_cycle field.


Merge: gt-3x1

branch: polecat/Slit
target: main
source_issue: gt-3x1
rig: gastown


Document merge queue architecture

Update docs/architecture.md with:

- Merge Queue section explaining Beads-native approach
- Engineer role (renamed from Refinery)
- Session restart protocol
- gt mq command reference
- Federation considerations for queue

Also update any references to .gastown/ → config/.


Town root .beads has schema mismatch with bd

The .beads directory at town root (/Users/stevey/gt/.beads) has an incompatible schema:

```
Error: failed to open database: failed to initialize schema: sqlite3: SQL logic error: no such column: thread_id
```

Meanwhile, gastown/.beads (symlinked to mayor/rig/.beads) works fine.

## Impact

- gt mail inbox fails at town root
- gt handoff sends mail to broken db
- Daemon can't check its inbox

## Options

1. Delete town root .beads/beads.db and let it recreate
2. Symlink town root .beads to gastown/.beads
3. Run schema migration on existing db

## Root Cause

Likely a beads version upgrade that added thread_id column, but the town root db was created before that.


Plugin: Plan-to-Epic converter

## Purpose

Help users create beads epics from various planning inputs.

## Inputs
- Markdown task lists
- GitHub issues
- Linear/Jira exports
- Free-form descriptions
- Existing beads epics

## Output
- Beads epic with properly structured children
- Dependencies set for wave ordering
- Priorities assigned
- Ready for `gt spawn --epic <id>`

## Implementation Options

### Option A: CLI Tool
```bash
gt plan import --from github --repo owner/repo --label batch-candidate
gt plan import --from markdown tasks.md
gt plan structure <epic-id>  # analyze and add dependencies
```

### Option B: Plugin Agent
A plugin at `<rig>/plugins/plan-oracle/` that:
- Receives planning requests via mail
- Analyzes scope and requirements
- Creates structured beads epic
- Sets dependencies based on analysis

### Option C: Interactive Mode
```bash
gt plan create
# Walks through questions, creates epic interactively
```

## Axiom

As stated: 'The Planning phase should end in the creation of a workable Beads plan.'

This plugin bridges the gap between human planning and machine-executable work.

## Priority

P2 - Nice to have for MVP. Manual epic creation works for now.

## Note

No "swarm IDs" - output is just a beads epic with children. Workers process it independently.


VC Pattern Integration: Bring validated ideas to Gas Town

Analysis of ~/src/vc identified 6 validated patterns from the 2nd orchestrator attempt that map cleanly to Gas Town primitives. VC achieved 254 issues closed, 90.9% gate pass rate, and 24 successful missions.

Key insight: VC built ~4300 lines of Go for features that become ~65 lines of YAML + CLI flags in Gas Town's architecture.

Child tasks track each pattern to integrate.


mol-outpost-assign: Intelligent work routing to outposts

The federation design shows outposts.yaml with a static policy section. Simple preference ordering is fine as config, but intelligent work routing should be a molecule.

Current static approach:
```yaml
policy:
  default_preference: [local, gce-burst, cloudrun-burst]
```

Cases requiring cognition:
- "This is a long-running research task, route to VM not CloudRun"
- "This touches sensitive code, keep local"
- "These 5 issues are related, batch them to same outpost"
- "CloudRun cost is high today, prefer local even if slower"

## Molecule: outpost-assign
Intelligent work-to-outpost routing.

## Step: classify-work
Analyze the issue/work item:
- Expected duration (quick fix vs multi-hour)
- Resource requirements
- Sensitivity/security tier
- Related work (same epic?)

## Step: check-capacity
Query outpost status:
- Current load on each
- Cost accrued today
- Health status

## Step: select-outpost
Choose optimal outpost based on:
- Work classification
- Capacity/cost
- Policy constraints
Needs: classify-work, check-capacity

## Step: emit-assignment
Record decision in beads for audit.
Needs: select-outpost

## Notes
- This molecule is invoked by Mayor/Witness when spawning
- Simple cases can short-circuit to static policy
- Full analysis only for ambiguous cases


gt rig info: Show detailed rig information

Add 'gt rig info <rig>' command to show detailed rig status.

Should show:
- Rig path and git URL
- Active polecats with status
- Refinery status
- Witness status
- Recent activity
- Beads summary (open issues count)


Swarm learning: Beads database locality gap

## PGT Bug (GGT Design Already Correct)

Mayor created issues in `~/ai/mayor/rigs/beads/.beads/` but polecats use `~/ai/beads/.beads/`. Different databases = polecats can't see Mayor's beads.

**GGT Fix**: architecture.md already specifies:
- All agents use BEADS_DIR pointing to rig-level `.beads/`
- Lines 116-143: Beads Configuration for Multi-Agent
- Lines 573-586: Rig-Level Beads via BEADS_DIR

This is a PGT implementation gap, not a design issue. GGT spawn must set BEADS_DIR correctly.


bd pin command fails: invalid field for update: pinned

In beads v0.32.0, `bd pin <id>` fails with 'invalid field for update: pinned'. The pinned field exists in the schema but update logic doesn't handle it.

Repro:
```
bd create 'test issue'
bd pin <id>
# Error: invalid field for update: pinned
```

Expected: Issue should be pinned.

This blocks gt mail send --pinned from working.


Immediate daemon notification on lifecycle request

When gt handoff sends a lifecycle request to the daemon (via bd mail send deacon/), the daemon only discovers it on its next heartbeat poll (every 5 min). Workers wait unnecessarily for retirement.

## Current Behavior
1. Worker runs gt handoff
2. Lifecycle mail sent to deacon/ via beads
3. Worker blocks waiting for retirement
4. Daemon heartbeat runs (up to 5 min later)
5. Daemon processes lifecycle request and kills session

## Expected Behavior
Lifecycle requests should be processed immediately, not on poll interval.

## Proposed Solutions

### Option A: SIGUSR1 Signal (simplest)
1. Add SIGUSR1 handler in daemon that calls ProcessLifecycleRequests()
2. gt handoff reads daemon.pid and sends SIGUSR1 after mail send

### Option B: Unix Socket
1. Daemon listens on ~/gt/daemon/lifecycle.sock
2. gt handoff connects and sends 'process' message

### Option C: Watchfile + fsnotify
1. gt handoff touches ~/gt/daemon/lifecycle.trigger
2. Daemon uses fsnotify to detect and process

Recommend Option A for simplicity.

## Affected Files
- internal/daemon/daemon.go - add signal handler
- internal/cmd/handoff.go - send signal after mail


Per-rig beads repo configuration

Add per-rig beads configuration to rig config schema.

## Config Schema

In each rig's config.json:

```json
{
  "version": 1,
  "name": "wyvern",
  "git_url": "https://github.com/steveyegge/wyvern",
  "beads": {
    "repo": "local",    // "local" | "<path>" | "<git-url>"
    "root": null,       // Override bd --root (optional)
    "prefix": "wyv"     // Issue prefix for this rig
  }
}
```

## Repo Options

| Value | Meaning | Use Case |
|-------|---------|----------|
| `"local"` | Use project's `.beads/` | Own projects, full commit access |
| `"<path>"` | Use beads at path | OSS contributions |
| `"<git-url>"` | Clone and use repo | Team shared beads |

## Environment Injection

When spawning polecats, Gas Town sets:
```bash
export BEADS_ROOT="<resolved-path>"
```

## Resolution Logic

```go
func ResolveBeadsRoot(rigConfig *RigConfig, rigPath string) (string, error) {
    beads := rigConfig.Beads
    switch {
    case beads.Root != "":
        return beads.Root, nil
    case beads.Repo == "local" || beads.Repo == "":
        return filepath.Join(rigPath, ".beads"), nil
    case strings.HasPrefix(beads.Repo, "/"):
        return beads.Repo, nil
    case strings.Contains(beads.Repo, "://"):
        return cloneAndResolve(beads.Repo)
    default:
        return filepath.Join(rigPath, beads.Repo), nil
    }
}
```

## Backwards Compatibility

If `beads` section missing, assume `"repo": "local"`.