Deacon keepalive: quiet daemon during rounds

Replace tmux-poke interrupts with a keepalive file the daemon respects.

## Problem

Current daemon pokes Deacon via tmux SendKeys every ~5 minutes if heartbeat
is stale. This can INTERRUPT the Deacon mid-work, especially during long
plugin execution or health remediation.

## Solution

Deacon writes a keepalive file at start of rounds:
```json
{
  "timestamp": "2025-12-20T15:30:00Z",
  "expected_duration_minutes": 10,
  "action": "executing mol-deacon-rounds"
}
```

Daemon reads this and backs off:
- If keepalive is fresh AND within expected_duration: skip poke
- If keepalive is stale OR past expected_duration: poke (fallback)

## Files

- `{townRoot}/deacon/keepalive.json` - Written by Deacon
- Daemon already reads `{townRoot}/deacon/heartbeat.json` - similar pattern

## Deacon Behavior

1. Start of rounds: write keepalive with expected duration
2. End of rounds: write heartbeat (existing), clear/update keepalive
3. If rounds take longer than expected: Deacon gets one poke, squelches it

## Daemon Changes

Modify `pokeDeacon()` in daemon.go:
1. Check keepalive.json freshness and expected_duration
2. If within bounds: skip poke, log "Deacon active"
3. If past bounds: poke as fallback

## Worst Case

Deacon crashes mid-rounds without clearing keepalive:
- Daemon waits until expected_duration expires
- Then pokes, triggering respawn loop
- Max delay: expected_duration (configurable, default 10-15 min)

## Configuration

In pinned kernel bead:
```yaml
config:
  rounds_expected_duration_minutes: 10
```


implement

Implement the solution for gt-qwyu. Follow codebase conventions.
File discovered work as new issues with bd create.

Make regular commits with clear messages.
Keep changes focused on the assigned issue.

Depends: load-context


Merge conflicts: Buzzard/mq-status, Dementus/harness-docs


CLI: polecat commands (add, list, wake, sleep, decommission)

GGT is missing most polecat management commands that PGT has.

Missing Commands:
- gt polecat add <rig> <name> - Add polecat to rig (creates clone)
- gt polecat list [<rig>] - List polecats with state
- gt polecat info <polecat> - Show detailed info
- gt polecat wake <polecat> - Mark available
- gt polecat sleep <polecat> - Mark unavailable
- gt polecat decommission <polecat> - Remove polecat safely

PGT Reference: gastown-py/src/gastown/cli/polecat_cmd.py

Notes:
- spawn exists but doesn't cover management
- wake/sleep are in polecat manager but not CLI
- decommission should check for uncommitted work


test pin fix


Add molecule phase lifecycle diagram to architecture.md

Create a clear lifecycle diagram showing molecule phases:

```
                    ┌─────────────┐
                    │   Proto     │
                    │  (crystal)  │
                    └──────┬──────┘
                           │
                      bd mol bond
                           │
              ┌────────────┴────────────┐
              │                         │
              ▼                         ▼
      ┌───────────────┐        ┌───────────────┐
      │     Mol       │        │    Wisp       │
      │   (liquid)    │        │    (gas)      │
      │   durable     │        │  ephemeral    │
      │  main beads   │        │ .beads-eph/   │
      └───────┬───────┘        └───────┬───────┘
              │                        │
         bd mol squash            bd mol squash
              │                        │
              ▼                        ▼
      ┌───────────────┐        ┌───────────────┐
      │    Digest     │        │   (nothing)   │
      │ (distillate)  │        │  evaporates   │
      │  in git hist  │        └───────────────┘
      └───────────────┘
```

Also document:
- When to use Mol vs Wisp
- Mol: code review waves, epic implementation, feature work
- Wisp: orchestration, polecat work sessions, patrol loops


Refinery needs manual restart/handoff mechanism

Refinery sessions can get stuck or need restart. Currently requires manual intervention. Need: 1) gt refinery restart command, 2) Refinery self-handoff on context fill, 3) Auto-recovery from stuck states.


gt done: Command doesn't exist but documented in polecat CLAUDE.md

The polecat CLAUDE.md documents 'gt done' as the command to signal work is ready for merge queue, but running it gives 'unknown command'. Either implement the command or update the documentation.


gt mq integration land: merge integration branch to main

Implement 'gt mq integration land <epic>' command.

Actions:
1. Verify all MRs targeting integration/<epic> are merged
2. Verify integration branch exists
3. Merge integration/<epic> to main (--no-ff)
4. Run tests on main
5. Push to origin
6. Delete integration branch
7. Update epic status

Options:
- --force: land even if some MRs still open
- --skip-tests: skip test run
- --dry-run: preview only

This creates a single merge commit for the entire epic's work.

Reference: docs/merge-queue-design.md#integration-branches


Town & Rig Management: install, doctor, federation

Reify the Gas Town installation as a first-class concept.

## Goals
- Installable: gt install [path] creates complete installation
- Diagnosable: gt doctor checks and fixes issues
- Federable: Clone town to VMs with central control

## Architecture Reference

See docs/architecture.md for full design, especially:
- Directory structure (Town Level / Rig Level sections)
- Configuration (town.json, rigs.json schemas)
- Key design decisions (visible config dir, decentralized agents)


Consider splitting large files (800+ lines)

Several files are getting large and may benefit from splitting:
- internal/beads/beads.go (990 lines)
- internal/cmd/molecule.go (981 lines)
- internal/refinery/manager.go (934 lines)
- internal/beads/beads_test.go (883 lines)
- internal/cmd/polecat.go (836 lines)
- internal/witness/manager.go (808 lines)
- internal/cmd/mail.go (804 lines)

For .go files, consider extracting logical subsystems. For test files, this is lower priority.


gt mail send should tmux-notify recipient

## Problem

When mail is sent via gt mail send, the recipient session does not get a tmux notification. In Python Gas Town (PGT), mail delivery triggers a tmux display-message or similar notification so the agent knows mail arrived.

## Expected Behavior

When gt mail send <addr> is called:
1. Mail is delivered to recipient inbox
2. If recipient has an active tmux session, send notification
3. Notification should be visible (display-message or bell)

## Current Behavior

Mail is delivered but no notification. Agent has to poll inbox to discover new mail.

## Impact

- Agents miss time-sensitive messages
- Heartbeat pokes from daemon will not wake agents
- Coordination is slower (polling vs push)

## Implementation Notes

After successful mail delivery, check if recipient has active session:
- gt session list can identify active sessions
- tmux display-message or send-keys can notify
- Could inject a visible prompt like "[MAIL] New message from <sender>"

## Reference

Check PGT implementation for how it handles this.


Swarm: ephemeral rig support

PGT has ephemeral rigs for swarms - temporary worker groups that are destroyed after landing.

Missing Features:
- gt swarm init [--rig <name>|--git-url <url>] [--num-workers N]
- gt swarm worker add/remove/list <rig-id>
- gt swarm rigs - List ephemeral rigs
- gt swarm destroy <rig-id> - Destroy ephemeral rig

Directory structure:
<workspace>/mayor/workers/<rig-id>/
├── rig.json (metadata)
├── alice/ (git clone)
├── bob/
└── carol/

PGT Reference: gastown-py/src/gastown/ephemeral.py

Note: Beads issue gt-kmn.12 mentions this but implementation is missing.


Polecat .beads/ contamination from stale branches

**Fixed in commit 8699b7b**

## Problem

When polecats are spawned from branches that previously had bd sync run on them, the .beads/ directory from the branch contains stale issues.jsonl, config.yaml, etc.

The setupSharedBeads() function was creating a redirect file, but NOT cleaning up the existing .beads/ contents first.

## Root Cause

1. Old polecat branch has .beads/ tracked in git (from previous bd sync)
2. gt spawn uses Add() which reuses existing branch
3. WorktreeAddExisting() checks out branch, including .beads/ files
4. setupSharedBeads() creates redirect, but other files remain
5. bd commands see stale data

## Fix

setupSharedBeads() now:
1. Removes entire .beads/ directory if it exists
2. Recreates fresh with only redirect file
3. Redirect points directly to mayor/rig/.beads (not through rig root)


gt mail send: add stdin and file input support for complex messages

Current -m flag is fragile with multi-line messages containing backticks, quotes, or shell special chars. Add: 1) --stdin flag to read message body from stdin (heredoc-friendly), 2) -f/--file flag to read from file. This sidesteps shell quoting nightmares for handoff messages with code samples.


Enhanced polecat decommission prompting

Add decommission checklist to polecat AGENTS.md.template. Make crystal clear: verify ALL before signaling done.

## Checklist for AGENTS.md.template

```markdown
## Decommission Checklist

**CRITICAL**: Before signaling done, you MUST complete this checklist.
The Witness will verify each item and bounce you back if dirty.

### Pre-Done Verification

```bash
# 1. Git status - must be clean
git status
# Expected: "nothing to commit, working tree clean"

# 2. Stash list - must be empty
git stash list
# Expected: (empty output)

# 3. Beads sync - must be up to date
bd sync --status
# Expected: "Up to date" or "Nothing to sync"

# 4. Branch merged - your work must be on main
git log main --oneline -1
git log HEAD --oneline -1
# Expected: Same commit
```

### If Any Check Fails

- **Uncommitted changes**: Commit them or discard if unnecessary
- **Stashes**: Pop and commit, or drop if obsolete
- **Beads out of sync**: Run `bd sync`
- **Branch not merged**: Complete the merge workflow

### Signaling Done

Only after ALL checks pass:

```bash
bd close <issue-id>
bd sync
town mail send <rig>/witness -s "Work Complete" -m "Issue <id> done."
```
```

## Implementation

Add to AGENTS.md.template in the polecat prompting section.


Phase 4.1: mol-deacon-patrol uses ephemeral

Deacon patrol cycles run as ephemeral molecules.

## Current Deacon Loop

```
while running:
    check_heartbeat()
    check_mail()
    sleep(interval)
```

## Molecule-Based Loop

```
while running:
    mol = bd mol bond mol-deacon-patrol-cycle --ephemeral
    execute_cycle(mol):
        check_heartbeat()
        check_mail()
        log_status()
    summary = generate_cycle_summary()
    bd squash mol --summary summary
    sleep(interval)
```

## Benefits

- Each cycle is tracked
- Digests show daemon health over time
- Can query: 'show me patrol cycles from last hour'
- Crash mid-cycle → ephemeral shows where we were


Witness session startup (gt witness start)

Implement gt witness start <rig>

Should:
1. Verify rig exists and has witness/ directory
2. Check for existing witness session (don't double-start)
3. Create tmux session: gt-<rig>-witness
4. Start Claude Code with --dangerously-skip-permissions
5. Send gt prime to load context
6. Send startup prompt

Similar pattern to refinery startup in internal/refinery/manager.go


Remove unused style helper functions

internal/style/style.go defines RenderSuccess, RenderWarning, RenderError, and RenderInfo helper functions that are never used. Code uses style.Success.Render() directly instead. Either use the helpers consistently or remove them.


Fix golangci-lint errcheck warnings (~160 issues)

Running golangci-lint shows ~160 errcheck warnings for unchecked error returns.

Common patterns:
- t.SetEnvironment() return values
- os.WriteFile(), os.RemoveAll()
- MarkFlagRequired() on cobra commands
- Various manager methods

Run: golangci-lint run ./...

Could batch fix with:
1. Add explicit _ = for intentionally ignored errors
2. Handle errors properly where they matter
3. Consider adding //nolint:errcheck for cobra flag setup


self-review

Review your own changes. Look for:
- Bugs and edge cases
- Style issues
- Missing error handling
- Security concerns

Fix any issues found before proceeding.

Depends: implement


Polecats should auto-cleanup after MR submission

Currently polecats must manually run 'gt handoff --shutdown' after completing work. This is error-prone and leaves stale polecats around.

## Desired Flow

1. Polecat completes work
2. Polecat runs 'gt mq submit' (or similar)
3. MR is added to integration queue
4. **Polecat automatically cleans up** (no manual handoff needed)

## Implementation Options

### Option A: mq submit triggers cleanup
In 'gt mq submit':
1. Submit MR to queue
2. Automatically run cleanup (same as gt handoff --shutdown)
3. Polecat session terminates

### Option B: Refinery triggers cleanup
When Refinery picks up MR:
1. Refinery processes MR
2. Sends message to Witness: 'CLEANUP: <polecat>'
3. Witness cleans up polecat

### Option C: Molecule-driven
Define cleanup as final phase of polecat-work molecule:
1. code → test → submit-mr → cleanup

## Note
This reinforces the ephemeral model: polecats exist only for the duration of a single task.


gt spawn beads sync warning is misleading for redirect-based polecats

## Problem

When spawning a polecat, gt spawn shows a warning:
```
Warning: beads sync: exit status 1
```

This is misleading because polecats using the redirect architecture (`.beads/redirect`) share the canonical database at `mayor/rig/.beads/beads.db`. The 'stale beads' indicated by the warning is just git branch divergence (main vs beads-sync), not actual data staleness.

## Expected Behavior

gt spawn should either:
1. Skip the beads sync check for polecats using redirects (they share the canonical DB)
2. Or provide a clearer message like 'beads redirect active, using shared database'

## Reproduction

```bash
gt spawn --issue gt-xxx --rig gastown --create
# Shows 'Warning: beads sync: exit status 1' even though beads are current
```

## Root Cause

spawn.go calls beads sync and treats any non-zero exit as a warning. But with redirects, the polecat doesn't need its own beads - it uses the canonical source via the redirect chain:
```
polecat/.beads/redirect -> ../../.beads -> gastown/.beads/redirect -> mayor/rig/.beads
```

## Fix Options

1. Check for .beads/redirect before calling sync
2. Have bd sync return 0 when redirect is present
3. Suppress the warning in spawn when redirect exists


Polecat Lifecycle Events: Refinery-Witness Coordination

## Problem

Polecat work completion is currently treated as a single event (MR submission), but the true completion is when the Refinery merges the work. This creates a lifecycle gap:

1. Polecat submits MR → considered "done" by Witness
2. But MR might fail to merge (conflicts, test failures)
3. No one notifies anyone when merge actually succeeds

## Solution: Two-Event Lifecycle

**Event 1: MR Submitted**
- `gt mq submit` notifies Witness
- Witness verifies submission was clean
- Polecat can go idle (but worktree retained)
- If submission had issues, Witness can help

**Event 2: MR Merged**
- Refinery sends `LIFECYCLE: work merged` to Witness
- Witness updates polecat state to `merged`
- Worktree now eligible for full cleanup/recycling

## Village Sibling Watch

For robustness, patrol roles check on their siblings:
- Refinery checks Witness via `gt peek`
- Witness checks Refinery via `gt peek`
- Creates defense in depth - if primary notification fails, someone catches it

## Recovery

If Refinery misses sending lifecycle notification:
- Witness polecat-scan can detect: polecat in mr_submitted but MR shows merged
- Deacon orphan-check can detect: merged MRs with stale polecats


Update vision.md with proto/mol/wisp terminology

Update the Steam Engine Metaphor section to use consistent phase terminology:

Current (vision.md):
- Proto molecules = fuel (templates)
- Wisps = steam (transient execution traces)
- Digests = distillate (permanent records)

New terminology:
- **Proto** = crystal/solid - frozen template
- **Mol** = liquid - reified durable instance (tracked in git)
- **Wisp** = gas - ephemeral instance (evaporates after squash)
- **Digest** = distillate - compressed summary after squash

Key clarification needed:
- Proto → bond → creates either Mol (durable) or Wisp (ephemeral)
- The choice of Mol vs Wisp depends on --wisp flag
- Default is Mol (durable, recorded in main beads)
- Wisp lives in .beads-ephemeral/, squashes away


bd mail send: pinned column missing from schema

gt mail send fails with: sqlite3: SQL logic error: table issues has no column named pinned

Likely a schema migration issue - bd schema has 'pinned' field but SQLite table doesn't.

## Reproduction
gt mail send gastown/Immortan -s 'test' -m 'test'

## Error
table issues has no column named pinned

## Fix
Either:
1. Add migration to add pinned column
2. Remove pinned from insert if not present
3. Regenerate DB from JSONL


Merge: gt-7923

branch: polecat/rictus
target: main
source_issue: gt-7923
rig: gastown


GGT Command Parity: Complete gt command coverage

Complete gt command set to match/exceed PGT town commands.

Covers: uninstall, rig info, refinery attach, witness, session mgmt, mail UX, daemon.


gt rig info: Show detailed rig information

Add 'gt rig info <rig>' command to show detailed rig status.

Should show:
- Rig path and git URL
- Active polecats with status
- Refinery status
- Witness status
- Recent activity
- Beads summary (open issues count)


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


Update documentation for new config architecture

Update docs to reflect new structure:
- docs/architecture.md: Directory structure section
- CLAUDE.md files: Config references
- Add docs/configuration.md with full reference


Molecule composition: Includes directive

Add support for molecule composition via the Includes directive.

## Format
\`\`\`markdown
## Molecule: derived-name
Includes: mol-base-molecule

## Step: additional-step
Additional instructions here.
Needs: step-from-base
\`\`\`

## Implementation
1. Add \`Includes:\` parsing to ParseMoleculeSteps()
2. Resolve included molecule by ID
3. Merge steps from included molecule
4. Allow new steps to depend on included steps
5. Support multiple includes (polymers)

## Files to modify
- internal/beads/molecule.go
- internal/beads/molecule_test.go

## Acceptance
- [ ] Parse Includes directive
- [ ] Resolve and merge included steps
- [ ] Dependencies across molecules work
- [ ] Multiple includes supported
- [ ] Tests cover composition scenarios


Pinned beads architecture implementation

Implement the pinned beads architecture from docs/pinned-beads-design.md

Phases:
1. Doctor checks for hook validation
2. Dashboard visibility (gt hooks, gt dashboard)
3. Protocol enforcement (self-pin, audit trail)
4. Documentation updates


Merge: gt-5af.1

branch: polecat/Ace
target: main
source_issue: gt-5af.1
rig: gastown


Remove shell respawn loops from witness and deacon

Currently witness and deacon use shell loops (`while true; do claude; done`) to auto-respawn when Claude exits. This bypasses the proper lifecycle architecture.

## Current Behavior
- witness.go: ensureWitnessSession() wraps Claude in a shell loop
- deacon.go: runDeaconStart() wraps Claude in a shell loop
- When Claude exits, shell automatically restarts it

## Desired Behavior
- Agents should request lifecycle changes via LIFECYCLE mail to deacon
- Daemon processes lifecycle requests and handles restarts
- No shell loops - daemon and deacon's health-scan handle respawns

## Why Change
1. Shell loops bypass state verification (requesting_cycle flag)
2. Shell loops bypass handoff mail protocol
3. Shell loops make lifecycle tracking harder
4. Daemon already has infrastructure for this

## Migration
1. Remove shell loop from witness (daemon/deacon handles restart)
2. Remove shell loop from deacon (daemon handles restart via ensureDeaconRunning)
3. Verify daemon's health check properly restarts dead agents
4. Update templates if needed

## Risk
Low - we have gt witness restart and gt deacon restart as fallbacks


Add agent abstraction layer to support non-Claude agents

Currently Gas Town hardcodes 'claude --dangerously-skip-permissions' throughout the codebase for spawning agents. We should add an abstraction layer to support other AI agents (e.g., Gemini CLI, OpenAI agents, local models).

Locations that spawn Claude:
- internal/cmd/mayor.go:131
- internal/cmd/deacon.go:150
- internal/cmd/witness.go:280
- internal/cmd/crew.go (multiple locations)
- internal/cmd/up.go:190, 229
- internal/session/manager.go:146
- internal/refinery/manager.go:207

Suggested approach:
1. Create an agent package with an interface
2. Add configuration for agent type in town/rig config
3. Replace hardcoded claude commands with agent.Spawn() calls
4. Support agents: claude, gemini, openai, local (ollama, etc.)


Polecats must not create GitHub PRs

Polecats should never use 'gh pr create' or create GitHub pull requests.

## Correct Workflow
1. Polecat works on polecat/<name> branch
2. Commits and pushes to origin
3. Creates beads MR issue (type: merge-request)
4. Refinery processes the MR and merges to main

## Wrong Workflow
- Using gh pr create
- Creating GitHub pull requests directly

## Why
- Refinery is our merge queue processor
- GitHub PRs bypass our workflow
- Beads MRs are the coordination mechanism


Workspace doctor checks: Config, state, mail, Mayor, rigs

Workspace-level doctor checks.

## Checks

### ConfigExists
- Verify config/ directory exists
- Verify config/town.json exists
- Fix: Cannot auto-fix (need gt install)

### ConfigValid
- Parse town.json
- Verify required fields (type, version, name)
- Verify type == "town"
- Fix: Cannot auto-fix

### RigsRegistryValid
- Parse config/rigs.json
- Verify each registered rig directory exists
- Warn on missing rigs
- Fix: Remove missing rigs from registry

### MayorExists
- Verify mayor/ directory exists
- Verify mayor/CLAUDE.md exists
- Fix: Create from template

### MayorMailboxExists
- Verify mayor/mail/ directory exists
- Verify mayor/mail/inbox.jsonl exists (can be empty)
- Fix: Create directory and empty file

### MayorStateValid
- Parse mayor/state.json if exists
- Verify valid JSON
- Fix: Reset to default state

## Implementation

```go
var WorkspaceChecks = []Check{
    &ConfigExistsCheck{},
    &ConfigValidCheck{},
    &RigsRegistryValidCheck{},
    &MayorExistsCheck{},
    &MayorMailboxExistsCheck{},
    &MayorStateValidCheck{},
}
```


Update architecture.md: Engineer role and Beads merge queue

Update docs/architecture.md with recent design decisions:

1. Agent table: Change "Refinery" role to "Engineer"
   - Refinery = place/module/directory
   - Engineer = role (agent that works in the Refinery)

2. Merge Queue section: Document Beads-native model
   - MRs are beads issues with --type=merge-request
   - gt mq commands (submit, list, next, process, reorder)
   - Ordering via depends-on links

3. CLI section: Add gt mq commands

4. Key Design Decisions: Add decisions for:
   - #15: Merge Queue in Beads
   - #16: Engineer role (distinct from Refinery place)
   - #17: Session restart protocol for Engineer


Merge: gt-h6eq.6

branch: polecat/keeper
target: main
source_issue: gt-h6eq.6
rig: gastown


decide-actions

Apply nudge matrix and queue actions.

Progressive nudge levels:
- Level 1: Gentle reminder
- Level 2: Stronger nudge
- Level 3: Final warning
- Level 4: Escalate to Mayor

Needs: inspect-workers


gt mail reply/thread: Conversation support

Add mail conversation features:

- gt mail reply <id> -m 'message' - Reply to a message
- gt mail thread <id> - Show all messages in a thread

Enables back-and-forth communication between agents.


Merge: gt-h6eq.5

branch: polecat/keeper
target: main
source_issue: gt-h6eq.5
rig: gastown


beads: Stop searching upward when .beads found

## Problem

When running bd commands in a nested directory structure with multiple .beads directories, bd shows a confusing warning:

```
╔══════════════════════════════════════════════════════════════════════════╗
║ WARNING: 2 beads databases detected in directory hierarchy              ║
╠══════════════════════════════════════════════════════════════════════════╣
║ Multiple databases can cause confusion and database pollution.          ║
║                                                                          ║
║   /Users/stevey/gt/gastown/.beads (261 issues)                           ║
║   /Users/stevey/gt/.beads (21 issues)                                    ║
║                                                                          ║
║ WARNING: Not using the closest database! Check your BEADS_DB setting.   ║
║                                                                          ║
║ RECOMMENDED: Consolidate or remove unused databases to avoid confusion. ║
╚══════════════════════════════════════════════════════════════════════════╝
```

## Why This Is Wrong

In Gas Town, nested .beads directories are **intentional and necessary**:
- Town level: /Users/stevey/gt/.beads (mail, town-level issues)
- Rig level: /Users/stevey/gt/gastown/.beads (gastown project issues)
- Worker level: polecats have their own beads in worktrees

These are **unrelated** beads instances for different scopes. They should never be consolidated.

## Expected Behavior

When bd finds a .beads directory, it should:
1. Use that directory (closest ancestor wins)
2. **Stop searching upward** - do not look for parent .beads directories
3. **No warning** about multiple databases

## Current Behavior

bd searches all the way up to root, finds all .beads directories, and warns about "multiple databases" even though they are separate, intentional instances.

## Fix

In the database discovery code, stop the upward search as soon as a .beads directory is found. The first .beads found is the one to use, and parent directories are out of scope.

## Note

This is a beads issue, filed here for tracking. Should be implemented in the beads codebase.


Merge polecat/slit: docs bd mol bond/squash/burn CLI

Branch: polecat/slit

## Summary
Added comprehensive CLI reference documentation for the three molecule lifecycle commands to molecules.md:

- **bd mol bond**: Instantiate proto into Mol (durable) or Wisp (ephemeral)
- **bd mol squash**: Complete molecule and generate digest
- **bd mol burn**: Abandon molecule without digest

Includes argument tables, behavior descriptions, examples, and a lifecycle diagram showing the steam engine metaphor mapping.

Closes: gt-odvf


Add godoc comments to exported functions

Several exported functions lack godoc comments. While not critical, adding documentation would improve code maintainability. Focus on:

- Public API functions in each package
- Exported types and their methods
- Functions that have non-obvious behavior

Can be addressed incrementally as code is touched.


request-shutdown

Send shutdown request to Witness.
Wait for termination.

The polecat is now ready to be cleaned up.
Do not exit directly - wait for Witness to kill the session.

Depends: generate-summary


gt nudge should accept flexible session identifiers

Currently `gt nudge` requires the exact tmux session name (e.g., `gt-gastown-furiosa`).

It should also accept:
- `gastown/furiosa` (rig/polecat format)
- `furiosa` (polecat name, infer rig from cwd or require if ambiguous)

The session list command shows `gastown/furiosa` format, but nudge rejects it:
```
gt session list → shows 'gastown/furiosa'
gt nudge gastown/furiosa 'msg' → 'session not found'
gt nudge gt-gastown-furiosa 'msg' → works
```

Should normalize all these formats to the tmux session name internally.


Witness patrol wisp with polecat leases

Witness should maintain a rolling patrol wisp that tracks active polecats:

```
wisp-witness-patrol
├── lease: furiosa (boot → working → done)
├── lease: nux (working)
└── lease: slit (done, closed)
```

When POLECAT_STARTED arrives:
- bd mol bond mol-polecat-lease wisp-patrol --var polecat=X

Patrol loop iterates leases:
- gt peek $polecat
- If idle: gt nudge
- If shutdown received: close lease

When all leases closed:
- bd mol squash wisp-xxx --summary='N polecats processed'

Requires mol-polecat-lease proto definition.


Polecat Mood Plugin (standard)

Standard witness plugin molecule that assesses polecat emotional state.

## Molecule Definition

```json
{
  "id": "mol-polecat-mood",
  "title": "Assess mood for {{polecat_name}}",
  "description": "Analyze captured output and determine emotional state.\n\nVars:\n- {{polecat_name}} - The polecat to assess\n- {{captured_output}} - Recent tmux capture\n\nOutput: gt polecat mood {{polecat_name}} <emoji>",
  "labels": ["template", "plugin", "witness", "tier:haiku"],
  "issue_type": "task"
}
```

## Mood Emojis

```
😺 working     Active tool calls, making progress
😸 productive  Completing tasks, tests passing
🐱 idle        Waiting at prompt, no recent activity
😼 confident   Self-reviewing, about to submit
😿 struggling  Repeated errors, test failures
🙀 stuck       No progress for 10+ min
😽 done        Work complete, requesting shutdown
😾 blocked     Explicitly waiting on dependency
```

## Bonding

During witness patrol plugin-run step:

```bash
bd mol bond mol-polecat-mood $PATROL_WISP \
  --ref mood-{{polecat_name}} \
  --var polecat_name=ace \
  --var captured_output="$TMUX_CAPTURE"
```

## Installation

```bash
bd mol install mol-polecat-mood  # From Mol Mall
```

## Customization

Fork the molecule and modify description to change assessment criteria or add custom moods. Install your fork to override.


Merge: gt-rana.1

branch: polecat/rictus
target: main
source_issue: gt-rana.1
rig: gastown


Merge: gt-3x1.3

branch: polecat/Doof
target: main
source_issue: gt-3x1.3
rig: gastown