# Room Configuration Guide

Complete examples of configuring different room types with the Adaptive
Lighting Mode System.

## Example 1: Master Bedroom

**Goal**: Full control with optional AL, reading/sleep modes, weekend mode

**Hardware**:
- Inovelli Blue Dimmer: `bedroom_switch` (Zigbee2MQTT name)
- Lights: `light.bedroom_ceiling`, `light.bedroom_lamp_1`,
  `light.bedroom_lamp_2`
- No presence sensor (privacy)

**Adaptive Lighting Configuration** (in `configuration.yaml`):
```yaml
adaptive_lighting:
  - name: bedroom
    lights:
      - light.bedroom_ceiling
      - light.bedroom_lamp_1
      - light.bedroom_lamp_2
    interval: 90
    transition: 45
    take_over_control: true
    autoreset_control_seconds: 3600  # 1 hour gentle reset
```

**Package File** (`packages/adaptive_lighting_master_bedroom.yaml`):

Copy from `adaptive_lighting_bedroom_template.yaml`, customize:
- Modes: Adaptive, Reading, Relaxing, Sleep, Manual Override
- Weekend mode enabled
- Default mode: Adaptive

**Blueprint Automations** (create via UI):

1. **Config Button Mode Cycling**:
   - Blueprint: Inovelli Mode Cycling
   - Switch Action Event: `event.bedroom_switch_action`
   - Mode Input Select: `input_select.bedroom_lighting_mode`
   - LED Color Entity: `number.bedroom_switch_led_color_when_on`
   - Zigbee2MQTT Device Name: `bedroom_switch`

2. **Button Actions**:
   - Blueprint: Inovelli Button Actions
   - Switch Action Event: `event.bedroom_switch_action`
   - AL Switch: `switch.adaptive_lighting_bedroom`
   - Target Lights: `light.bedroom_ceiling`, `light.bedroom_lamp_1`,
     `light.bedroom_lamp_2`
   - Auto-Reset: 30 minutes

**Testing**:
- [ ] Press config button → mode cycles through all 5 modes
- [ ] LED changes color for each mode
- [ ] Double-tap up → brightness boosts
- [ ] Weekend mode enables Friday 10pm
- [ ] Sunrise shifts to 10am on weekend

## Example 2: Living Room (Common Area)

**Goal**: Entertainment modes (Theater, Party), presence control

**Hardware**:
- Inovelli Blue Dimmer: `living_room_switch`
- Lights: `light.living_room_ceiling`, `light.living_room_lamp_1`
- Presence: `binary_sensor.living_room_occupancy`

**Package File** (`packages/adaptive_lighting_living_room.yaml`):

Copy from `adaptive_lighting_living_room_template.yaml`
- Modes: Adaptive, Theater, Party, Reading
- Auto-reset mode to Adaptive when lights turn off

**Blueprint Automations**:

1. **Config Button Mode Cycling** (same as bedroom)
2. **Button Actions** (same as bedroom, adjust auto-reset to 15 min)
3. **Presence Mode Reset**:
   - Occupancy Sensors: `binary_sensor.living_room_occupancy`
   - Empty Delay: 5 minutes
   - AL Switch: `switch.adaptive_lighting_living_room`
   - Mode Input Select: `input_select.living_room_lighting_mode`
   - Default Mode: `Adaptive`

**Testing**:
- [ ] Enter room → lights turn on (via separate occupancy automation)
- [ ] Press config button → cycles through 4 modes
- [ ] Set to Theater mode, leave room → after 5 min, resets to Adaptive
- [ ] Manual boost → leave room → manual control clears

## Example 3: Bathroom (Simple)

**Goal**: Always Adaptive, brightness boost only

**Hardware**:
- Inovelli Blue Dimmer: `bathroom_switch`
- Lights: `light.bathroom_ceiling`, `light.bathroom_vanity`
- Presence: `binary_sensor.bathroom_occupancy`

**Package File** (`packages/adaptive_lighting_bathroom.yaml`):

Copy from `adaptive_lighting_simple_template.yaml`
- No modes (Adaptive only)
- No weekend mode
- Simple reset on presence end

**Blueprint Automations**:

1. **Button Actions ONLY**:
   - Double-tap up: Boost brightness
   - Triple-tap down: Night light
   - Auto-reset: 10 minutes

2. **Presence Mode Reset**:
   - Reset manual control when empty 5 minutes
   - No mode reset (no input_select)

**Testing**:
- [ ] Double-tap up → brightness boosts
- [ ] Leave bathroom 5 min → manual control clears
- [ ] Triple-tap down → night light mode
- [ ] No config button action (not configured)

## Entity ID Quick Reference

### Finding Your Entities

**Inovelli Switch Entities** (via Zigbee2MQTT):
```
event.{device_name}_action           # Button presses (event entity)
number.{device_name}_led_color_when_on
number.{device_name}_led_color_when_off
number.{device_name}_led_intensity_when_on
select.{device_name}_smart_bulb_mode
select.{device_name}_button_delay
```

**Adaptive Lighting Entities**:
```
switch.adaptive_lighting_{name}
switch.adaptive_lighting_sleep_mode_{name}
switch.adaptive_lighting_adapt_brightness_{name}
switch.adaptive_lighting_adapt_color_{name}
```

**Your Input Helpers**:
```
input_select.{room}_lighting_mode
input_boolean.{room}_weekend_mode
```

## Common Customizations

### Add a New Mode

1. Edit package file, add mode to `input_select`:
```yaml
input_select:
  bedroom_lighting_mode:
    options:
      - "Adaptive"
      - "Reading"
      - "NEW MODE HERE"  # Add this
```

2. Add color mapping to global package (or use existing color)

3. Add mode application to automation:
```yaml
- conditions: "{{ mode == 'NEW MODE HERE' }}"
  sequence:
    - service: adaptive_lighting.change_switch_settings
      data:
        min_brightness: 50
        max_brightness: 80
        # ... settings
```

4. Reload YAML configuration

### Change Auto-Reset Timeout

Edit blueprint automation via UI:
- Settings → Automations → [Your button action automation]
- Click Edit
- Adjust "Auto-Reset Timeout" slider
- Save

### Disable Weekend Mode

Comment out weekend mode automations in package file:
```yaml
#  - id: bedroom_weekend_mode_auto_enable
#    alias: "Bedroom: Enable Weekend Mode Friday/Saturday"
#    # ... entire automation
```

Reload YAML configuration.