Extend nvidia role to include driver configuration

The nvidia role now handles full driver configuration instead of just
packages. Added options for open driver, modesetting, power management,
graphics settings, and driver package selection.

Updated zix790prors and wixos machine configs to use the new role
options, removing duplicated hardware.nvidia configuration blocks.

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>

.gitignore

@@ -1,3 +1,2 @@
 result
 thoughts
-.beads

flake.lock

@@ -21,45 +21,6 @@
         "type": "github"
       }
     },
-    "doomemacs": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1767773143,
-        "narHash": "sha256-QL/t9v2kFNxBDyNJb/s411o3mxujan+QX5IZglTdpTk=",
-        "owner": "doomemacs",
-        "repo": "doomemacs",
-        "rev": "3e15fb36d7f94f0a218bda977be4d3f5da983a71",
-        "type": "github"
-      },
-      "original": {
-        "owner": "doomemacs",
-        "repo": "doomemacs",
-        "type": "github"
-      }
-    },
-    "emacs-overlay": {
-      "inputs": {
-        "nixpkgs": [
-          "nix-doom-emacs-unstraightened"
-        ],
-        "nixpkgs-stable": [
-          "nix-doom-emacs-unstraightened"
-        ]
-      },
-      "locked": {
-        "lastModified": 1768011937,
-        "narHash": "sha256-SnU2XTo34vwVaijs+4VwcXTNwMWO4nwzzs08N39UagA=",
-        "owner": "nix-community",
-        "repo": "emacs-overlay",
-        "rev": "79abf71d9897cf3b5189f7175cda1b1102abc65c",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-community",
-        "repo": "emacs-overlay",
-        "type": "github"
-      }
-    },
     "flake-compat": {
       "flake": false,
       "locked": {
@@ -198,27 +159,6 @@
         "type": "github"
       }
     },
-    "nix-doom-emacs-unstraightened": {
-      "inputs": {
-        "doomemacs": "doomemacs",
-        "emacs-overlay": "emacs-overlay",
-        "nixpkgs": [],
-        "systems": "systems_2"
-      },
-      "locked": {
-        "lastModified": 1768034604,
-        "narHash": "sha256-62pIZMvGHhYJmMiiBsxHqZt/dFyENPcFHlJq5NJF3Sw=",
-        "owner": "marienz",
-        "repo": "nix-doom-emacs-unstraightened",
-        "rev": "9b3b8044fe4ccdcbb2d6f733d7dbe4d5feea18bc",
-        "type": "github"
-      },
-      "original": {
-        "owner": "marienz",
-        "repo": "nix-doom-emacs-unstraightened",
-        "type": "github"
-      }
-    },
     "nix-github-actions": {
       "inputs": {
         "nixpkgs": [
@@ -363,7 +303,6 @@
         "home-manager-unstable": "home-manager-unstable",
         "jovian": "jovian",
         "nix-darwin": "nix-darwin",
-        "nix-doom-emacs-unstraightened": "nix-doom-emacs-unstraightened",
         "nixos-wsl": "nixos-wsl",
         "nixpkgs": "nixpkgs_2",
         "nixpkgs-unstable": "nixpkgs-unstable",
@@ -385,21 +324,6 @@
         "repo": "default",
         "type": "github"
       }
-    },
-    "systems_2": {
-      "locked": {
-        "lastModified": 1681028828,
-        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
-        "owner": "nix-systems",
-        "repo": "default",
-        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-systems",
-        "repo": "default",
-        "type": "github"
-      }
     }
   },
   "root": "root",

flake.nix

@@ -47,12 +47,6 @@
       url = "github:steveyegge/beads";
       inputs.nixpkgs.follows = "nixpkgs-unstable";
     };
-
-    nix-doom-emacs-unstraightened = {
-      url = "github:marienz/nix-doom-emacs-unstraightened";
-      # Don't follow nixpkgs to avoid rebuild issues with emacs-overlay
-      inputs.nixpkgs.follows = "";
-    };
   };
 
   outputs = { self, nixpkgs, nixpkgs-unstable, nixos-wsl, ... } @ inputs: let
@@ -76,7 +70,6 @@
         home-manager.useUserPackages = true;
         home-manager.sharedModules = [
           inputs.plasma-manager.homeModules.plasma-manager
-          inputs.nix-doom-emacs-unstraightened.homeModule
         ];
         home-manager.extraSpecialArgs = {
           globalInputs = inputs;
@@ -105,7 +98,6 @@
         home-manager.useUserPackages = true;
         home-manager.sharedModules = [
           inputs.plasma-manager-unstable.homeModules.plasma-manager
-          inputs.nix-doom-emacs-unstraightened.homeModule
         ];
         home-manager.extraSpecialArgs = {
           globalInputs = inputs;
@@ -137,9 +129,6 @@
         ];
         home-manager.useGlobalPkgs = true;
         home-manager.useUserPackages = true;
-        home-manager.sharedModules = [
-          inputs.nix-doom-emacs-unstraightened.homeModule
-        ];
         home-manager.extraSpecialArgs = {
           globalInputs = inputs;
         };
@@ -230,11 +219,7 @@
       system = "x86_64-linux";
       modules = nixosModules ++ [
         ./machines/john-endesktop/configuration.nix
-        inputs.home-manager.nixosModules.home-manager
+        # Minimal server - no home-manager needed
-        {
-          home-manager.users.johno = import ./home/home-server.nix;
-          home-manager.extraSpecialArgs = { inherit system; };
-        }
       ];
     };
 

home/home-desktop.nix

@@ -23,7 +23,6 @@
     kubectl.enable = true;
     tmux.enable = true;
     plasma-manager.enable = true;
-    starship.enable = true;
   };
 
   targets.genericLinux.enable = true;

home/home-laptop-compact.nix

@@ -23,7 +23,6 @@
     plasma-manager.enable = true;
     emacs.enable = true;
     i3_sway.enable = true;
-    starship.enable = true;
 
     # Launcher wrappers for excluded/optional packages
     launchers = {

home/home-live-usb.nix

@@ -14,14 +14,8 @@
     desktop.enable = true;
     tmux.enable = true;
     plasma-manager.enable = true;
-    emacs = {
+    emacs.enable = true;
-      enable = true;
-      # Use pre-built Doom Emacs - all packages built at nix build time
-      # This means no doom sync is needed after booting the live USB
-      prebuiltDoom = true;
-    };
     i3_sway.enable = true;
-    starship.enable = true;
     # development.enable = false;  # Not needed for live USB
     # communication.enable = false; # Not needed for live USB
     # office.enable = false;       # Not needed for live USB

home/home-media-center.nix

@@ -20,7 +20,6 @@
     plasma-manager.enable = true;
     emacs.enable = true;
     i3_sway.enable = true;
-    starship.enable = true;
     # office.enable = false;    # Not needed for media center
     # sync.enable = false;      # Shared machine, no personal file sync
   };

home/home-server.nix

@@ -1,26 +0,0 @@
-{ pkgs, globalInputs, system, ... }:
-
-{
-  # Home Manager configuration for servers (minimal with development tools)
-  home.username = "johno";
-  home.homeDirectory = "/home/johno";
-  home.stateVersion = "24.05";
-
-  # Minimal roles for server with development capability
-  home.roles = {
-    base.enable = true;
-    development.enable = true;
-    emacs.enable = true;
-    starship.enable = true;
-    tmux.enable = true;
-  };
-
-  targets.genericLinux.enable = true;
-  home.sessionVariables = {};
-  home.sessionPath = [];
-
-  imports = [
-    ./roles
-    ./roles/base-linux
-  ];
-}

home/roles/communication/default.nix

@@ -4,7 +4,6 @@ with lib;
 
 let
   cfg = config.home.roles.communication;
-  isLinux = pkgs.stdenv.isLinux;
 in
 {
   options.home.roles.communication = {
@@ -13,14 +12,14 @@ in
 
   config = mkIf cfg.enable {
     home.packages = [
-      # For logging back into google chat (cross-platform)
+      # Communication apps
-      globalInputs.google-cookie-retrieval.packages.${system}.default
-    ] ++ optionals isLinux [
-      # Linux-only communication apps (Electron apps don't build on Darwin)
       pkgs.element-desktop
       # Re-enabled in 25.11 after security issues were resolved
       pkgs.fluffychat
       pkgs.nextcloud-talk-desktop
+      
+      # For logging back into google chat
+      globalInputs.google-cookie-retrieval.packages.${system}.default
     ];
   };
 }

home/roles/default.nix

@@ -19,6 +19,5 @@
     ./sync
     ./tmux
     ./emacs
-    ./starship
   ];
 }

home/roles/desktop/default.nix

@@ -4,7 +4,6 @@ with lib;
 
 let
   cfg = config.home.roles.desktop;
-  isLinux = pkgs.stdenv.isLinux;
 in
 {
   options.home.roles.desktop = {
@@ -13,29 +12,27 @@ in
 
   config = mkIf cfg.enable {
     home.packages = with pkgs; [
-      # Cross-platform desktop applications
+      # Desktop applications
       bitwarden-desktop
-      keepassxc
-      xdg-utils # XDG utilities for opening files/URLs with default applications
-    ] ++ optionals isLinux [
-      # Linux-only desktop applications
       dunst
+      keepassxc
       unstable.ghostty
       
-      # Linux-only desktop utilities
+      # Desktop utilities
       feh # Image viewer and wallpaper setter for X11
       rofi # Application launcher for X11
       solaar # Logitech management software
       waybar
       wofi # Application launcher for Wayland
+      xdg-utils # XDG utilities for opening files/URLs with default applications
       
-      # Linux-only system utilities with GUI components
+      # System utilities with GUI components
       (snapcast.override { pulseaudioSupport = true; })
       
-      # KDE tiling window management (Linux-only)
+      # KDE tiling window management
       kdePackages.krohnkite  # Dynamic tiling extension for KWin 6
       
-      # KDE PIM applications for email, calendar, and contacts (Linux-only)
+      # KDE PIM applications for email, calendar, and contacts
       kdePackages.kmail
       kdePackages.kmail-account-wizard
       kdePackages.kmailtransport
@@ -43,33 +40,33 @@ in
       kdePackages.kaddressbook
       kdePackages.kontact
       
-      # KDE System components needed for proper integration (Linux-only)
+      # KDE System components needed for proper integration
       kdePackages.kded
       kdePackages.systemsettings
       kdePackages.kmenuedit
       
-      # Desktop menu support (Linux-only)
+      # Desktop menu support
       kdePackages.plasma-desktop # Contains applications.menu
       
-      # KDE Online Accounts support (Linux-only)
+      # KDE Online Accounts support
       kdePackages.kaccounts-integration
       kdePackages.kaccounts-providers
       kdePackages.signond
       
-      # KDE Mapping (Linux-only)
+      # KDE Mapping
       kdePackages.marble  # Virtual globe and world atlas
       
-      # KDE Productivity (Linux-only)
+      # KDE Productivity
       kdePackages.kate        # Advanced text editor with syntax highlighting
       kdePackages.okular      # Universal document viewer (PDF, ePub, etc.)
       kdePackages.spectacle   # Screenshot capture utility
       kdePackages.filelight   # Visual disk usage analyzer
       
-      # KDE Multimedia (Linux-only)
+      # KDE Multimedia
       kdePackages.gwenview    # Image viewer and basic editor
       kdePackages.elisa       # Music player
       
-      # KDE System Utilities (Linux-only)
+      # KDE System Utilities  
       kdePackages.ark         # Archive manager (zip, tar, 7z, etc.)
       kdePackages.yakuake     # Drop-down terminal emulator
     ];
@@ -80,15 +77,12 @@ in
 
     programs.spotify-player.enable = true;
 
-    # Linux-only: GNOME keyring service
+    services.gnome-keyring = {
-    services.gnome-keyring = mkIf isLinux {
       enable = true;
     };
 
-    # Linux-only: systemd user services for rbw vault unlock
+    # rbw vault unlock on login and resume from suspend
-    systemd.user.services = mkIf isLinux {
+    systemd.user.services.rbw-unlock-on-login = {
-      # rbw vault unlock on login
-      rbw-unlock-on-login = {
       Unit = {
         Description = "Unlock rbw vault at login";
         After = [ "graphical-session.target" ];
@@ -107,8 +101,7 @@ in
       };
     };
 
-      # rbw vault unlock on resume from suspend
+    systemd.user.services.rbw-unlock-on-resume = {
-      rbw-unlock-on-resume = {
       Unit = {
         Description = "Unlock rbw vault after resume from suspend";
         After = [ "suspend.target" ];
@@ -126,10 +119,9 @@ in
         WantedBy = [ "suspend.target" ];
       };
     };
-    };
 
-    # Linux-only: KDE environment variables for proper integration
+    # KDE environment variables for proper integration
-    home.sessionVariables = mkIf isLinux {
+    home.sessionVariables = {
       QT_QPA_PLATFORMTHEME = "kde";
       KDE_SESSION_VERSION = "6";
     };
@@ -149,14 +141,13 @@ in
           "x-scheme-handler/https" = "firefox.desktop";
         };
         defaultApplications = {
-          # Web browsers (cross-platform)
+          # Web browsers
           "text/html" = "firefox.desktop";
           "x-scheme-handler/http" = "firefox.desktop";
           "x-scheme-handler/https" = "firefox.desktop";
           "x-scheme-handler/about" = "firefox.desktop";
           "x-scheme-handler/unknown" = "firefox.desktop";
-        } // optionalAttrs isLinux {
+          
-          # Linux-only: KDE application associations
           # Documents
           "application/pdf" = "okular.desktop";
           "text/plain" = "kate.desktop";
@@ -199,11 +190,9 @@ in
       };
     };
 
-    # Linux-only: Fix for KDE applications.menu file issue on Plasma 6
+    # Fix for KDE applications.menu file issue on Plasma 6
     # KDE still looks for applications.menu but Plasma 6 renamed it to plasma-applications.menu
-    xdg.configFile."menus/applications.menu" = mkIf isLinux {
+    xdg.configFile."menus/applications.menu".source = "${pkgs.kdePackages.plasma-workspace}/etc/xdg/menus/plasma-applications.menu";
-      source = "${pkgs.kdePackages.plasma-workspace}/etc/xdg/menus/plasma-applications.menu";
-    };
 
     # Note: modules must be imported at top-level home config
   };

home/roles/development/default.nix

@@ -85,25 +85,11 @@ in
         fi
       done
 
-      # Copy local skills from this repo (with retry for race conditions with running Claude)
-      for file in ${./skills}/*.md; do
-        if [ -f "$file" ]; then
-          filename=$(basename "$file" .md)
-          dest="$HOME/.claude/commands/''${filename}.md"
-          # Remove existing file first, then copy with retry on failure
-          rm -f "$dest" 2>/dev/null || true
-          if ! cp "$file" "$dest" 2>/dev/null; then
-            sleep 0.5
-            cp "$file" "$dest" || echo "Warning: Failed to copy $filename.md to commands"
-          fi
-        fi
-      done
-
       $DRY_RUN_CMD echo "Claude Code humanlayer commands and agents installed successfully${
         if cfg.allowArbitraryClaudeCodeModelSelection
         then " (model specifications preserved)"
         else " (model selection removed)"
-      } + local skills"
+      }"
     '';
 
     # Set up beads Claude Code integration (hooks for SessionStart/PreCompact)

home/roles/development/skills/parallel_beads.md

@@ -1,205 +0,0 @@
----
-description: Orchestrate parallel bead processing with worktrees, PRs, and reviews
----
-
-# Parallel Beads Workflow
-
-This skill orchestrates parallel bead processing using subagents. Each bead gets its own worktree, implementation, PR, and review.
-
-## Phase 1: Selection
-
-1. **Get ready beads**: Run `bd ready` to list all beads with no blockers
-2. **Present selection**: Use `AskUserQuestion` with `multiSelect: true` to let the user choose which beads to work on
-   - Include bead ID and title for each option
-   - Allow selection of multiple beads
-
-Example:
-```
-AskUserQuestion with:
-- question: "Which beads do you want to work on in parallel?"
-- multiSelect: true
-- options from bd ready output
-```
-
-## Phase 2: Parallel Implementation
-
-For each selected bead, launch a subagent using the Task tool. All subagents should be launched in parallel (single message with multiple Task tool calls).
-
-### Subagent Instructions Template
-
-Each implementation subagent should receive these instructions:
-
-```
-Work on bead [BEAD_ID]: [BEAD_TITLE]
-
-1. **Create worktree**:
-   - Branch name: `bead/[BEAD_ID]`
-   - Worktree path: `~/wt/[REPO_NAME]/[BEAD_ID]`
-   - Command: `git worktree add -b bead/[BEAD_ID] ~/wt/[REPO_NAME]/[BEAD_ID]`
-
-2. **Review the bead requirements**:
-   - Run `bd show [BEAD_ID]` to understand the acceptance criteria
-   - Note any external issue references (GitHub issues, Linear tickets, etc.)
-
-3. **Implement the changes**:
-   - Work in the worktree directory
-   - Complete all acceptance criteria listed in the bead
-   - Run any relevant tests or checks
-
-4. **Commit and push**:
-   - Stage all changes: `git add -A`
-   - Create a descriptive commit message
-   - Push the branch: `git push -u origin bead/[BEAD_ID]`
-
-5. **Create a PR**:
-   - Detect hosting provider from origin URL: `git remote get-url origin`
-   - If URL contains `github.com`, use `gh`; otherwise use `tea` (Gitea/Forgejo)
-   - PR title: "[BEAD_ID] [BEAD_TITLE]"
-   - PR body must include:
-     - Reference to bead ID: "Implements bead: [BEAD_ID]"
-     - Any external issue references from the bead (e.g., "Closes #123")
-     - Summary of changes
-   - For GitHub (`gh`):
-     ```bash
-     gh pr create --title "[BEAD_ID] [BEAD_TITLE]" --body "$(cat <<'EOF'
-     ## Summary
-     [Brief description of changes]
-
-     ## Bead Reference
-     Implements bead: [BEAD_ID]
-
-     ## External Issues
-     [Any linked issues from the bead]
-
-     ## Changes
-     - [List of changes made]
-     EOF
-     )"
-     ```
-   - For Gitea (`tea`):
-     ```bash
-     tea pr create --head bead/[BEAD_ID] --base main \
-       --title "[BEAD_ID] [BEAD_TITLE]" \
-       --description "## Summary
-     [Brief description of changes]
-
-     ## Bead Reference
-     Implements bead: [BEAD_ID]
-
-     ## External Issues
-     [Any linked issues from the bead]
-
-     ## Changes
-     - [List of changes made]"
-     ```
-
-6. **Update bead status**:
-   - Mark the bead as "in_review": `bd update [BEAD_ID] --status=in_review`
-   - Add the PR URL to the bead notes: `bd update [BEAD_ID] --notes="$(bd show [BEAD_ID] --json | jq -r '.notes')
-
-PR: [PR_URL]"`
-
-7. **Report results**:
-   - Return: PR URL, bead ID, success/failure status
-   - If blocked or unable to complete, explain what's blocking progress
-```
-
-### Launching Subagents
-
-Use `subagent_type: "general-purpose"` for implementation subagents. Launch all selected beads' subagents in a single message for parallel execution:
-
-```
-<Task calls for each selected bead - all in one message>
-```
-
-Collect results from all subagents before proceeding.
-
-## Phase 3: Parallel Review
-
-After all implementation subagents complete, launch review subagents for each PR.
-
-### Review Subagent Instructions Template
-
-```
-Review PR for bead [BEAD_ID]
-
-1. **Detect hosting provider**: Run `git remote get-url origin` - if it contains `github.com` use `gh`, otherwise use `tea`
-
-2. **Read the PR**:
-   - For GitHub: `gh pr view [PR_NUMBER] --json title,body,additions,deletions,files`
-   - For Gitea: `tea pr view [PR_NUMBER]`
-   - View the diff: `git diff main...bead/[BEAD_ID]`
-
-3. **Review against acceptance criteria**:
-   - Run `bd show [BEAD_ID]` to get the acceptance criteria
-   - Verify each criterion is addressed
-
-4. **Leave review comments**:
-   - For GitHub: `gh pr review [PR_NUMBER] --comment --body "[COMMENTS]"`
-   - For Gitea: `tea pr review [PR_NUMBER] --comment "[COMMENTS]"`
-   - Include:
-     - Acceptance criteria checklist (which are met, which might be missing)
-     - Code quality observations
-     - Suggestions for improvement
-
-5. **Return summary**:
-   - Overall assessment (ready to merge / needs changes)
-   - Key findings
-```
-
-Launch all review subagents in parallel.
-
-## Phase 4: Cleanup and Summary
-
-After reviews complete:
-
-1. **Clean up worktrees**:
-   ```bash
-   git worktree remove ~/wt/[REPO_NAME]/[BEAD_ID] --force
-   ```
-   Do this for each bead's worktree.
-
-2. **Provide final summary**:
-   Present a table or list with:
-   - Bead ID
-   - PR URL
-   - Status (success / failed / blocked)
-   - Review summary
-   - Any failures or blockers encountered
-
-Example output:
-```
-## Parallel Beads Summary
-
-| Bead | PR | Bead Status | Review |
-|------|-----|-------------|--------|
-| beads-abc | #123 | in_review | Approved |
-| beads-xyz | #124 | in_review | Needs changes |
-| beads-123 | - | open (failed) | Blocked by missing dependency |
-
-### Failures/Blockers
-- beads-123: Could not complete because [reason]
-
-### Next Steps
-- Review PRs that need changes
-- Address blockers for failed beads
-- Run `/reconcile_beads` after PRs are merged to close beads
-```
-
-## Error Handling
-
-- **Subagent failures**: If a subagent fails or times out, note it in the summary but continue with other beads
-- **PR creation failures**: Report the error but continue with reviews of successful PRs
-- **Worktree conflicts**: If a worktree already exists, ask the user if they want to remove it or skip that bead
-
-## Resource Limits
-
-- Consider limiting concurrent subagents to 3-5 to avoid overwhelming system resources
-- If user selects more beads than the limit, process them in batches
-
-## Notes
-
-- This workflow integrates with the beads system (`bd` commands)
-- Worktrees are created in `~/wt/[REPO_NAME]/` by convention
-- Each bead gets its own isolated branch and worktree
-- PRs automatically reference the bead ID for traceability

home/roles/development/skills/reconcile_beads.md

@@ -1,88 +0,0 @@
----
-description: Reconcile beads with merged PRs and close completed beads
----
-
-# Reconcile Beads Workflow
-
-This skill reconciles beads that are in `in_review` status with their corresponding PRs. If a PR has been merged, the bead is closed.
-
-## Prerequisites
-
-- Custom status `in_review` must be configured: `bd config set status.custom "in_review"`
-- Beads in `in_review` status should have a PR URL in their notes
-
-## Workflow
-
-### Step 1: Find beads in review
-
-```bash
-bd list --status=in_review
-```
-
-### Step 2: For each bead, check PR status
-
-1. **Get the PR URL from bead notes**:
-   ```bash
-   bd show [BEAD_ID] --json | jq -r '.[0].notes'
-   ```
-   Note: `bd show --json` returns an array, so use `.[0]` to access the first element.
-   Extract the PR URL (look for lines starting with "PR:" or containing pull request URLs).
-   Extract the PR number: `echo "$NOTES" | grep -oP '/pulls/\K\d+'`
-
-2. **Detect hosting provider**:
-   - Run `git remote get-url origin`
-   - If URL contains `github.com`, use `gh`; otherwise use `tea` (Gitea/Forgejo)
-
-3. **Check PR status**:
-   - For GitHub:
-     ```bash
-     gh pr view [PR_NUMBER] --json state,merged
-     ```
-   - For Gitea:
-     ```bash
-     tea pr list --state=closed
-     ```
-     Look for the PR number in the INDEX column with STATE "merged".
-     Note: `tea pr view [PR_NUMBER]` lists all PRs, not a specific one. Use `tea pr list --state=closed` and look for your PR number in the results.
-
-### Step 3: Close merged beads
-
-If the PR is merged:
-```bash
-bd close [BEAD_ID] --reason="PR merged: [PR_URL]"
-```
-
-### Step 4: Report summary
-
-Present results:
-
-```
-## Beads Reconciliation Summary
-
-### Closed (PR Merged)
-| Bead | PR | Title |
-|------|-----|-------|
-| beads-abc | #123 | Feature X |
-| beads-xyz | #456 | Bug fix Y |
-
-### Still in Review
-| Bead | PR | Status | Title |
-|------|-----|--------|-------|
-| beads-def | #789 | Open | Feature Z |
-
-### Issues Found
-- beads-ghi: No PR URL found in notes
-- beads-jkl: PR #999 not found (may have been deleted)
-```
-
-## Error Handling
-
-- **Missing PR URL**: Skip the bead and report it
-- **PR not found**: Report the error but continue with other beads
-- **API errors**: Report and continue
-
-## Notes
-
-- This skill complements `/parallel_beads` which sets beads to `in_review` status
-- Run this skill periodically or after merging PRs to keep beads in sync
-- Beads with closed (but not merged) PRs are not automatically closed - they may need rework

home/roles/emacs/default.nix

@@ -23,30 +23,13 @@ let
     if pkgs.stdenv.isDarwin
     then pkgs.emacs-macport.pkgs.withPackages emacsPackages
     else pkgs.emacs.pkgs.withPackages emacsPackages;
-
-  # Path to doom config directory (relative to this file)
-  doomConfigDir = ./doom;
 in
 {
   options.home.roles.emacs = {
     enable = mkEnableOption "Doom Emacs with vterm and tree-sitter support";
-
-    prebuiltDoom = mkOption {
-      type = types.bool;
-      default = false;
-      description = ''
-        Use nix-doom-emacs-unstraightened to pre-build all Doom packages at
-        nix build time. This eliminates the need to run `doom sync` after
-        first boot, making it ideal for live USB images or immutable systems.
-
-        When enabled, the doom configuration is read-only (stored in nix store).
-      '';
-    };
   };
 
-  config = mkIf cfg.enable (mkMerge [
+  config = mkIf cfg.enable {
-    # Common configuration for both modes
-    {
     home.packages = [
       pkgs.emacs-all-the-icons-fonts
       pkgs.fira-code
@@ -63,16 +46,13 @@ in
       pkgs.python3
     ];
 
-      fonts.fontconfig.enable = true;
-    }
-
-    # Standard Doom Emacs mode (requires doom sync at runtime)
-    (mkIf (!cfg.prebuiltDoom) {
     programs.emacs = {
       enable = true;
       package = defaultEmacsPackage;
     };
 
+    fonts.fontconfig.enable = true;
+
     # Mount emacs and tree-sitter grammars from nix store
     home.file = {
       "${config.xdg.configHome}/emacs".source = doomEmacs;
@@ -93,20 +73,5 @@ in
       rm -rf "${config.xdg.configHome}/doom"
       ln -sf "${config.home.homeDirectory}/nixos-configs/home/roles/emacs/doom" "${config.xdg.configHome}/doom"
     '';
-    })
-
-    # Pre-built Doom Emacs mode (no doom sync needed - ideal for live USB)
-    (mkIf cfg.prebuiltDoom {
-      programs.doom-emacs = {
-        enable = true;
-        doomDir = doomConfigDir;
-        doomLocalDir = "${config.xdg.dataHome}/doom";
-        # Add extra packages that aren't part of Doom but needed for our config
-        extraPackages = epkgs: [
-          epkgs.vterm
-          epkgs.treesit-grammars.with-all-grammars
-        ];
   };
-    })
-  ]);
 }

home/roles/emacs/doom/packages.el

@@ -51,21 +51,11 @@
 
 ;; (package! org-caldav)
 
-;; Note: Packages with custom recipes must be pinned for nix-doom-emacs-unstraightened
-;; to build deterministically. Update pins when upgrading packages.
-
 (package! gptel :recipe (:nonrecursive t))
 
 (package! claude-code-ide
-  :recipe (:host github :repo "manzaltu/claude-code-ide.el")
+  :recipe (:host github :repo "manzaltu/claude-code-ide.el"))
-  :pin "760240d7f03ff16f90ede9d4f4243cd94f3fed73")
 
 (package! gptel-tool-library
   :recipe (:host github :repo "aard-fi/gptel-tool-library"
-           :files ("*.el"))
+           :files ("*.el")))
-  :pin "baffc3b0d74a2b7cbda0d5cd6dd7726d6ccaca83")
-
-(package! beads
-  :recipe (:type git :repo "https://codeberg.org/ctietze/beads.el.git"
-           :files ("lisp/*.el"))
-  :pin "f40a6461d3c0fa0969311bbb6a1e30d1bba86c88")

home/roles/email/default.nix

@@ -4,7 +4,6 @@ with lib;
 
 let
   cfg = config.home.roles.email;
-  isLinux = pkgs.stdenv.isLinux;
 in
 {
   options.home.roles.email = {
@@ -90,9 +89,8 @@ in
       account default : proton
     '';
 
-    # Linux-only: Systemd service for mail sync (Darwin uses launchd instead)
+    # Systemd service for mail sync
-    systemd.user.services = mkIf isLinux {
+    systemd.user.services.mbsync = {
-      mbsync = {
       Unit = {
         Description = "Mailbox synchronization service";
         After = [ "network-online.target" ];
@@ -106,11 +104,9 @@ in
         StandardError = "journal";
       };
     };
-    };
 
-    # Linux-only: Systemd timer for automatic sync
+    # Systemd timer for automatic sync
-    systemd.user.timers = mkIf isLinux {
+    systemd.user.timers.mbsync = {
-      mbsync = {
       Unit = {
         Description = "Mailbox synchronization timer";
       };
@@ -124,5 +120,4 @@ in
       };
     };
   };
-  };
 }

home/roles/kdeconnect/default.nix

@@ -4,15 +4,13 @@ with lib;
 
 let
   cfg = config.home.roles.kdeconnect;
-  isLinux = pkgs.stdenv.isLinux;
 in
 {
   options.home.roles.kdeconnect = {
     enable = mkEnableOption "Enable KDE Connect for device integration";
   };
 
-  # KDE Connect services are Linux-only (requires D-Bus and systemd)
+  config = mkIf cfg.enable {
-  config = mkIf (cfg.enable && isLinux) {
     services.kdeconnect = {
       enable = true;
       indicator = true;

home/roles/starship/default.nix

@@ -1,72 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-with lib;
-
-let
-  cfg = config.home.roles.starship;
-in
-{
-  options.home.roles.starship = {
-    enable = mkEnableOption "starship cross-shell prompt";
-  };
-
-  config = mkIf cfg.enable {
-    programs.starship = {
-      enable = true;
-      enableBashIntegration = true;
-      enableZshIntegration = true;
-
-      settings = {
-        add_newline = true;
-
-        character = {
-          success_symbol = "[>](bold green)";
-          error_symbol = "[x](bold red)";
-          vimcmd_symbol = "[<](bold green)";
-        };
-
-        directory = {
-          truncation_length = 4;
-          truncate_to_repo = true;
-        };
-
-        git_branch = {
-          symbol = "";
-          format = "[$symbol$branch(:$remote_branch)]($style) ";
-        };
-
-        git_status = {
-          format = "([$all_status$ahead_behind]($style) )";
-        };
-
-        nix_shell = {
-          symbol = "";
-          format = "[$symbol$state( \\($name\\))]($style) ";
-        };
-
-        cmd_duration = {
-          min_time = 2000;
-          format = "[$duration]($style) ";
-        };
-
-        # Disable modules that are noisy or rarely needed
-        package.disabled = true;
-        nodejs.disabled = true;
-        python.disabled = true;
-        ruby.disabled = true;
-        java.disabled = true;
-        golang.disabled = true;
-        rust.disabled = true;
-        php.disabled = true;
-        lua.disabled = true;
-        perl.disabled = true;
-        terraform.disabled = true;
-        kubernetes.disabled = true;
-        docker_context.disabled = true;
-        aws.disabled = true;
-        gcloud.disabled = true;
-        azure.disabled = true;
-      };
-    };
-  };
-}

home/roles/sync/default.nix

@@ -4,7 +4,6 @@ with lib;
 
 let
   cfg = config.home.roles.sync;
-  isLinux = pkgs.stdenv.isLinux;
 in
 {
   options.home.roles.sync = {
@@ -12,10 +11,9 @@ in
   };
 
   config = mkIf cfg.enable {
-    # Linux-only: syncthingtray requires system tray support
+    home.packages = with pkgs; [
-    home.packages = optionals isLinux (with pkgs; [
       syncthingtray
-    ]);
+    ];
 
     services.syncthing = {
       enable = true;

machines/wixos/configuration.nix

@@ -17,6 +17,15 @@
       enable = true;
       wayland = true;
     };
+    nvidia = {
+      enable = true;
+      package = "latest";
+      graphics.extraPackages = with pkgs; [
+        mesa
+        libvdpau-va-gl
+        libva-vdpau-driver
+      ];
+    };
     users.enable = true;
   };
 
@@ -29,28 +38,13 @@
   wsl.wslConf.network.hostname = "wixos";
   wsl.wslConf.user.default = "johno";
 
-  services.xserver.videoDrivers = [ "nvidia" ];
+  # WSL-specific environment variables for graphics
-  hardware.graphics = { 
-    enable = true;
-
-    extraPackages = with pkgs; [
-      mesa
-      libvdpau-va-gl
-      libva-vdpau-driver
-    ];
-  };
   environment.sessionVariables = {
     LD_LIBRARY_PATH = [
       "/usr/lib/wsl/lib"
       "/run/opengl-driver/lib"
     ];
   };
-  hardware.nvidia = {
-    modesetting.enable = true;
-    nvidiaSettings = true;
-    open = true;
-    package = config.boot.kernelPackages.nvidiaPackages.latest;
-  };
 
   # This value determines the NixOS release from which the default
   # settings for stateful data, like file locations and database versions

machines/zix790prors/configuration.nix

@@ -26,7 +26,10 @@ with lib;
       x11 = true;
     };
     nfs-mounts.enable = true;
-    nvidia.enable = true;
+    nvidia = {
+      enable = true;
+      graphics.enable32Bit = true;
+    };
     printing.enable = true;
     remote-build.enableBuilder = true;
     users.enable = true;
@@ -47,27 +50,11 @@ with lib;
   # Fix dual boot clock sync - tell Linux to use local time for hardware clock
   time.hardwareClockInLocalTime = true;
 
-  # NVIDIA Graphics configuration
-  services.xserver.videoDrivers = [ "nvidia" ];
-  hardware.graphics.enable = true;
-  hardware.graphics.enable32Bit = true;
-  
   # Set DP-0 as primary display with 164.90Hz refresh rate
   services.xserver.displayManager.sessionCommands = ''
     ${pkgs.xorg.xrandr}/bin/xrandr --output DP-0 --mode 3440x1440 --rate 164.90 --primary
   '';
 
-  hardware.nvidia = {
-    modesetting.enable = true;
-    nvidiaSettings = true;
-    package = pkgs.linuxPackages.nvidiaPackages.stable;
-    open = true;
-    
-    # For gaming performance
-    powerManagement.enable = false;
-    powerManagement.finegrained = false;
-  };
-
   services.ollama = {
     enable = true;
     acceleration = "cuda";

roles/common.nix

@@ -1,35 +0,0 @@
-# Common configuration shared between NixOS and Darwin
-{ lib, pkgs, ... }:
-
-{
-  config = {
-    time.timeZone = "America/Los_Angeles";
-
-    environment.systemPackages = with pkgs; [
-      git
-      glances
-      pciutils
-      tree
-      usbutils
-      vim
-    ];
-
-    nix = {
-      package = pkgs.nix;
-      settings = {
-        experimental-features = [ "nix-command" "flakes" ];
-        max-jobs = "auto";
-        trusted-users = [ "johno" ];
-        substituters = [
-        ];
-      };
-
-      gc = {
-        automatic = true;
-        options = "--delete-older-than 10d";
-      };
-    };
-
-    nixpkgs.config.allowUnfree = true;
-  };
-}

roles/darwin.nix

@@ -7,10 +7,6 @@ let
   setEnvironmentPath = "${config.system.build.setEnvironment}";
 in
 {
-  imports = [
-    ./common.nix
-  ];
-
   config = {
     # Salt manages /etc/bashrc, /etc/zshrc, /etc/zshenv
     # nix-darwin writes to .local variants for nix-specific configuration
@@ -47,6 +43,8 @@ in
       fi
     '';
 
+    time.timeZone = "America/Los_Angeles";
+
     # System preferences
     system.defaults = {
       # Custom keyboard shortcuts
@@ -81,5 +79,42 @@ in
         };
       };
     };
+
+    environment.systemPackages = with pkgs; [
+      git
+      glances
+      pciutils
+      tree
+      usbutils
+      vim
+    ];
+
+    nix = {
+      package = pkgs.nix;
+      # distributedBuilds = true;
+      # buildMachines = [{
+      #   hostName = "z790prors.oglehome";
+      #   system = "x86_64-linux";
+      #   protocol = "ssh-ng";
+      #   sshUser = "johno";
+      #   sshKey = "/root/.ssh/id_ed25519";
+      #   maxJobs = 3;
+      #   speedFactor = 2;
+      # }];
+      settings = {
+        experimental-features = [ "nix-command" "flakes" ];
+        max-jobs = "auto";
+        trusted-users = [ "johno" ];
+        substituters = [
+        ];
+      };
+
+      gc = {
+        automatic = true;
+        options = "--delete-older-than 10d";
+      };
+    };
+
+    nixpkgs.config.allowUnfree = true;
   };
 }

roles/default.nix

@@ -4,7 +4,6 @@ with lib;
 
 {
   imports = [
-    ./common.nix
     ./audio
     ./bluetooth
     ./btrfs
@@ -32,6 +31,7 @@ with lib;
       LC_TELEPHONE = "en_US.UTF-8";
       LC_TIME = "en_US.UTF-8";
     };
+    time.timeZone = "America/Los_Angeles";
 
     services.xserver.xkb = {
       layout = "us";
@@ -49,7 +49,42 @@ with lib;
     # Enable the OpenSSH daemon.
     services.openssh.enable = true;
 
-    # NixOS-specific gc option (not available on Darwin)
+    environment.systemPackages = with pkgs; [
-    nix.gc.randomizedDelaySec = "14m";
+      git
+      glances
+      pciutils
+      tree
+      usbutils
+      vim
+    ];
+
+    nix = {
+      package = pkgs.nix;
+      # distributedBuilds = true;
+      # buildMachines = [{
+      #   hostName = "z790prors.oglehome";
+      #   system = "x86_64-linux";
+      #   protocol = "ssh-ng";
+      #   sshUser = "johno";
+      #   sshKey = "/root/.ssh/id_ed25519";
+      #   maxJobs = 3;
+      #   speedFactor = 2;
+      # }];
+      settings = {
+        experimental-features = [ "nix-command" "flakes" ];
+        max-jobs = "auto";
+        trusted-users = [ "johno" ];
+        substituters = [
+        ];
+      };
+
+      gc = {
+        automatic = true;
+        randomizedDelaySec = "14m";
+        options = "--delete-older-than 10d";
+      };
+    };
+
+    nixpkgs.config.allowUnfree = true;
   };
 }

roles/nvidia/default.nix

@@ -8,9 +8,89 @@ in
 {
   options.roles.nvidia = {
     enable = mkEnableOption "Enable the nvidia role";
+
+    # Driver configuration options
+    open = mkOption {
+      type = types.bool;
+      default = true;
+      description = "Use the open source nvidia kernel driver (for Turing and newer GPUs).";
+    };
+
+    modesetting = mkOption {
+      type = types.bool;
+      default = true;
+      description = "Enable kernel modesetting for nvidia.";
+    };
+
+    nvidiaSettings = mkOption {
+      type = types.bool;
+      default = true;
+      description = "Enable the nvidia-settings GUI.";
+    };
+
+    package = mkOption {
+      type = types.enum [ "stable" "latest" "beta" "vulkan_beta" "production" ];
+      default = "stable";
+      description = "The nvidia driver package to use.";
+    };
+
+    powerManagement = {
+      enable = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable nvidia power management (useful for laptops, not recommended for desktops).";
+      };
+
+      finegrained = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable fine-grained power management for Turing and newer GPUs.";
+      };
+    };
+
+    graphics = {
+      enable = mkOption {
+        type = types.bool;
+        default = true;
+        description = "Enable hardware graphics support.";
+      };
+
+      enable32Bit = mkOption {
+        type = types.bool;
+        default = false;
+        description = "Enable 32-bit graphics libraries (needed for some games).";
+      };
+
+      extraPackages = mkOption {
+        type = types.listOf types.package;
+        default = [];
+        description = "Extra packages to add to hardware.graphics.extraPackages.";
+      };
+    };
   };
 
   config = mkIf cfg.enable {
+    # Set xserver video driver
+    services.xserver.videoDrivers = [ "nvidia" ];
+
+    # Graphics configuration
+    hardware.graphics = {
+      enable = cfg.graphics.enable;
+      enable32Bit = cfg.graphics.enable32Bit;
+      extraPackages = cfg.graphics.extraPackages;
+    };
+
+    # NVIDIA driver configuration
+    hardware.nvidia = {
+      modesetting.enable = cfg.modesetting;
+      nvidiaSettings = cfg.nvidiaSettings;
+      open = cfg.open;
+      package = config.boot.kernelPackages.nvidiaPackages.${cfg.package};
+      powerManagement.enable = cfg.powerManagement.enable;
+      powerManagement.finegrained = cfg.powerManagement.finegrained;
+    };
+
+    # Additional packages for nvidia support
     environment.systemPackages = with pkgs; [
       libva-utils
       nvidia-vaapi-driver