[zix790prors] Clean up some comments

Created i3blocks configuration with modules matching waybar setup including disk, CPU, memory, pulseaudio, backlight, network, battery, and clock. Applied matching color scheme and workspace button styling. i3blocks works with i3wm unlike waybar which only supports sway.

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-Authored-By: Claude <noreply@anthropic.com>

home/modules/i3+sway/default.nix

@@ -105,12 +105,134 @@ in {
   };
 
   config = {
+    # i3blocks configuration file
+    home.file.".config/i3blocks/config".text = ''
+      # i3blocks config - replicating waybar setup
+      separator_block_width=15
+      markup=pango
+
+      [disk]
+      command=df -h / | awk 'NR==2 {print "💾 " $5}'
+      interval=30
+      separator=true
+
+      [cpu]
+      command=top -bn1 | grep "Cpu(s)" | sed "s/.*, *\([0-9.]*\)%* id.*/\1/" | awk '{print "🧠 " int(100 - $1) "%"}'
+      interval=2
+      separator=true
+
+      [memory]
+      command=free | awk 'NR==2 {printf "🐏 %.0f%%\n", $3*100/$2}'
+      interval=5
+      separator=true
+
+      [pulseaudio]
+      command=${pkgs.writeShellScript "i3blocks-pulseaudio" ''
+        volume=$(pactl get-sink-volume @DEFAULT_SINK@ | grep -Po '\d+%' | head -1)
+        muted=$(pactl get-sink-mute @DEFAULT_SINK@ | grep -o 'yes')
+        if [ "$muted" = "yes" ]; then
+          echo "🔇"
+        else
+          vol_num=''${volume%\%}
+          if [ $vol_num -le 33 ]; then
+            echo "🔈 $volume"
+          elif [ $vol_num -le 66 ]; then
+            echo "🔉 $volume"
+          else
+            echo "🔊 $volume"
+          fi
+        fi
+      ''}
+      interval=1
+      signal=10
+      separator=true
+
+      [backlight]
+      command=${pkgs.writeShellScript "i3blocks-backlight" ''
+        if command -v brightnessctl &>/dev/null; then
+          brightnessctl g | awk -v max=$(brightnessctl m) '{printf "☀️ %.0f%%\n", ($1/max)*100}'
+        fi
+      ''}
+      interval=1
+      separator=true
+
+      [network]
+      command=${pkgs.writeShellScript "i3blocks-network" ''
+        if iwgetid -r &>/dev/null; then
+          ssid=$(iwgetid -r)
+          signal=$(grep "^\s*w" /proc/net/wireless | awk '{print int($3 * 100 / 70)}')
+          echo "📶 $ssid ($signal%)"
+        else
+          ip=$(ip -4 addr show | grep -oP '(?<=inet\s)\d+(\.\d+){3}' | grep -v '127.0.0.1' | head -1)
+          if [ -n "$ip" ]; then
+            echo "🔌 $ip"
+          else
+            echo "❌"
+          fi
+        fi
+      ''}
+      interval=5
+      separator=true
+
+      [battery]
+      command=${pkgs.writeShellScript "i3blocks-battery" ''
+        if [ -d /sys/class/power_supply/BAT0 ]; then
+          capacity=$(cat /sys/class/power_supply/BAT0/capacity)
+          status=$(cat /sys/class/power_supply/BAT0/status)
+
+          if [ "$status" = "Charging" ]; then
+            echo "⚡ $capacity%"
+          else
+            echo "🔋 $capacity%"
+          fi
+        fi
+      ''}
+      interval=10
+      separator=true
+
+      [time]
+      command=date '+%Y-%m-%d %H:%M'
+      interval=1
+      separator=false
+    '';
+
     xsession.windowManager.i3 = let
       base_i3_config = recursiveUpdate shared_config {
         bars = [{
           position = "bottom";
-          statusCommand = "${pkgs.i3status}/bin/i3status";
+          statusCommand = "${pkgs.i3blocks}/bin/i3blocks";
           trayOutput = "primary";  # Enable system tray on primary output
+          fonts = {
+            names = [ "Fira Code" "monospace" ];
+            size = 11.0;
+          };
+          colors = {
+            background = "#000000";
+            statusline = "#ffffff";
+            separator = "#666666";
+
+            # Workspace button colors (matching waybar)
+            focusedWorkspace = {
+              border = "#285577";
+              background = "#285577";
+              text = "#ffffff";
+            };
+            activeWorkspace = {
+              border = "#5f676a";
+              background = "#5f676a";
+              text = "#ffffff";
+            };
+            inactiveWorkspace = {
+              border = "#222222";
+              background = "#222222";
+              text = "#888888";
+            };
+            urgentWorkspace = {
+              border = "#900000";
+              background = "#900000";
+              text = "#ffffff";
+            };
+          };
         }];
         keybindings = shared_config.keybindings // {
           "${shared_config.modifier}+d" = "exec rofi -show drun";
@@ -315,7 +437,5 @@ in {
         sidebar-mode = true;
       };
     };
-
-    programs.i3status.enable = true;
   };
 }

machines/zix790prors/configuration.nix

@@ -58,18 +58,9 @@ with lib;
   '';
 
   hardware.nvidia = {
-    # Modesetting is required.
     modesetting.enable = true;
-    
-    # Enable the Nvidia settings menu,
-    # accessible via `nvidia-settings`.
     nvidiaSettings = true;
-    
-    # Optionally, you may need to select the appropriate driver version for your specific GPU.
     package = pkgs.linuxPackages.nvidiaPackages.stable;
-    
-    # Use open source kernel modules (recommended for RTX/GTX 16xx and newer)
-    # Set to false if you have an older GPU
     open = true;
     
     # For gaming performance

roles/desktop/gaming.nix

@@ -19,8 +19,10 @@ in
 
     (mkIf (cfg.enable && cfg.gaming.emulation) {
       environment.systemPackages = with pkgs; [
-        ryubing
         dolphin-emu
+        dolphin-emu-primehack
+        retroarch-full
+        ryubing
       ];
       # TODO: Remove me once dolphin-emu and dolphin-emu-primehack update
       #       dependencies to mbedtls from mbedtls_2 (which is currently)