Implements the synthesis step that combines leg outputs into a final
deliverable for convoy workflows:
- `gt synthesis start <convoy-id>` - Start synthesis after verifying
all legs are complete, collecting outputs, and slinging to polecat
- `gt synthesis status <convoy-id>` - Show synthesis readiness and
leg completion status
- `gt synthesis close <convoy-id>` - Close convoy after synthesis
Key features:
- Collects leg outputs from formula-defined paths (e.g., findings.md)
- Creates synthesis bead with combined context from all leg outputs
- Integrates with formula.toml synthesis configuration
- Provides TriggerSynthesisIfReady() for automated synthesis trigger
- Adds SynthesisFields struct for tracking synthesis state in beads
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add full convoy formula execution to gt formula run command:
- Parse formula file to extract legs, synthesis, and prompts
- Create convoy bead in town beads to track execution
- Create leg beads for each parallel leg with tracking relations
- Create synthesis bead with dependencies on all legs
- Sling each leg to a polecat with leg-specific context
- Support dry-run mode to preview execution
The implementation supports convoy-type formulas with parallel legs
and a synthesis step. Non-convoy formulas show manual execution steps.
(gt-574qn)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
CRITICAL: Prevents work loss from unpushed commits.
The bug: gt mq submit created MR beads without verifying the branch was pushed to remote. This allowed polecats to create MR beads for unpushed work, which the Refinery would skip and the Witness would nuke, losing work.
The fix: Add same push verification that gt done uses. Now both code paths require git push before MR submission.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add a proper `gt formula` command with subcommands:
- gt formula list - List available formulas
- gt formula show <name> - Display formula details
- gt formula run <name> - Execute a formula (scaffold for gt-574qn)
- gt formula create <name> - Create new formula templates
The create command generates valid TOML templates for:
- task: Single-step task formula
- workflow: Multi-step workflow with dependencies
- patrol: Repeating patrol cycle for wisps
Replaces the simple formulas.go that only delegated to `bd formula list`.
The `formulas` alias is preserved for backwards compatibility.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implement internal/formula package for parsing and validating formula.toml files:
- types.go: Formula, Step, Leg, Aspect, Template, Input, Var structs
- parser.go: TOML parsing using BurntSushi/toml, validation, dependency resolution
- Supports convoy, workflow, expansion, and aspect formula types
- Infers type from content when not explicitly set
- Validates required fields, unique IDs, and dependency references
- Detects circular dependencies in workflow steps
- Provides TopologicalSort and ReadySteps for execution planning
(gt-5chbk)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Delete 5 legacy .formula.yaml files (have .toml replacements)
- Remove unused FileConfigYAML constant
- Add TODO for beads config.yaml → config.json migration (bd-10wg)
- Update docs to use JSON examples instead of yaml code blocks
- Change plugin frontmatter from YAML to TOML in docs
- Add .toml to code file detection in branch_check.go
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added centralized emoji constants in internal/constants/constants.go
for easy customization. Updated all files that hardcoded role emojis
to use the new constants.
Changes:
- Witness emoji: 👁 (eye) → 🦉 (owl) - less creepy, matches visual identity
- Deacon emoji: 🦉 (owl) → 🐺 (wolf) - matches hierarchy prompt (wolf in engine room)
- Added RoleEmoji() helper function for string-based lookups
- Maintained backwards compatibility with legacy role names
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- convoy.go: Escape single quotes in SQL to prevent injection
- engineer.go: Add comment clarifying test command trust model
(config.json is trusted infra, not PR-controlled)
- agents.go, prime.go, mayor.md.tmpl: Fix 'gt polecats' -> 'gt polecat list'
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The unsling command had two bugs:
1. It used the local beads directory instead of the target agent's rig
2. It looked for status=hooked beads instead of the agent bead's hook_bead field
Changes:
- unsling.go: Rewrote to use agent bead's hook_bead field (matches how sling works)
- unsling.go: Now uses target agent's rig beads path, not local
- status.go: Prefer SQLite columns (issue.HookBead, issue.AgentState) over
parsing description text, with fallback for legacy beads
- beads.go: Added AgentState field to Issue struct for SQLite column access
This fixes the issue where `gt unsling gastown/crew/joe` would say "no work hooked"
even when gt status showed joe had a hook.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When gt sling is used without an existing convoy context, automatically
create a convoy for dashboard visibility. This ensures all work appears
in 'gt convoy list', even "swarm of one" assignments.
Changes:
- Add --no-convoy flag to skip auto-convoy creation
- Check if issue is already tracked by a convoy before creating new one
- Create convoy with title "Work: <issue-title>" and add tracks relation
- Display tracking info in sling output
- Update command help with auto-convoy documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
All role status lines now check for hooked work first:
- If hook has work: shows hook emoji with bead ID and title
- If hook empty: falls back to mail preview
Also fixed workspace detection for status-line command by using
the pane's working directory instead of relying on cwd.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add convoy ID validation to prevent SQL injection
- Add 5-second timeouts to all subprocess calls
- Batch issue lookups to eliminate N+1 query pattern
- Fix truncate() to handle multi-byte UTF-8 characters
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Update all documentation to present convoy as the primary unit of work tracking:
- README.md: Show convoy create before sling in Quick Start and Workflows
- reference.md: Reorder to show Convoy Management before Work Assignment
- understanding-gas-town.md: Add convoy to dispatch workflow example
- mayor.md.tmpl: Add convoy commands to Work Management section
- crew.md.tmpl: Include convoy in dispatch workflow table
Convoy is now the standard workflow - all slings should be part of a convoy.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
In worktrees, git push -u origin <branch> may not create the local
refs/remotes/origin/<branch> tracking ref due to missing refspecs.
BranchPushedToRemote now explicitly creates the remote tracking ref
from FETCH_HEAD after fetching if it does not exist locally.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use cwd-based detection instead of env-aware detection for gt hook status
display. This ensures we show the hook for the agent whose directory you're
in, not the agent from GT_ROLE env var.
Before: cd ~/gt/beads/crew/dave && gt hook → showed gastown/crew/joe (wrong)
After: cd ~/gt/beads/crew/dave && gt hook → shows beads/crew/dave (correct)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When slinging with . as target, resolve it to the current agent identity
instead of using literal dot. This matches git convention where dot means
current directory/context.
Fix applied to both runSling and runSlingFormula code paths.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add numbered prefixes to `gt convoy list` output (1. 2. 3. ...)
- Support numeric shortcuts in `gt convoy status <n>`
- Add `-i/--interactive` flag for expandable tree view TUI
- New internal/tui/convoy package with bubbletea-based UI
- j/k navigation, enter to expand/collapse
- 1-9 to jump directly to convoy
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds a stable actor-PID identifier alongside the Claude session_id.
Useful for correlation across session handoffs.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove unused SessionBeacon function from session/names.go
- Add gt seance commands to reference.md Sessions section
- Document StartupNudge format for session discovery
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements automatic nuke of polecats after completion:
- HandlePolecatDone: Auto-nukes immediately for ESCALATED/DEFERRED exits
(no pending MR) when cleanup_status=clean
- HandleMerged: Auto-nukes after verifying commit is on main and
cleanup_status=clean
- HandleLifecycleShutdown: Auto-nukes immediately since shutdown means
no pending work
Safety checks preserved:
- Verifies cleanup_status from agent bead (clean/has_uncommitted/etc)
- Verifies commit is on main before nuking
- Falls back to cleanup wisp if any check fails
New functions:
- NukePolecat(): Executes gt polecat nuke
- AutoNukeIfClean(): Checks safety and nukes if safe
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Key optimizations:
- Use --no-daemon for bd commands to avoid daemon IPC overhead
- Pre-fetch all agent beads in single query (ListAgentBeads)
- Pre-fetch all hook beads in single query (ShowMultiple)
- Pre-fetch all tmux sessions for O(1) lookup
- Parallel rig processing with goroutines
- Add --fast flag to skip mail lookups
The main bottleneck was bd daemon communication timing out on
stale daemon processes, causing 5+ second delays per rig.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When gt handoff is run with -s and -m flags, it now:
- Creates the handoff mail bead directly using bd create
- Captures the created bead ID
- Auto-hooks the bead with status=hooked so the next session picks it up
This enables the handoff workflow:
gt handoff -s "Title" -m "Instructions..."
The next session startup hook (gt prime) will detect the hooked bead
and present it to the agent for immediate execution.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a mail bead (type=message) is on hook, gt hook now shows:
- From: <sender>
- Subject: <title>
- Run: gt mail read <id>
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add "Hookable Mail" section to all role templates explaining how mail beads
can be hooked for ad-hoc instruction handoff. Key documentation points:
- GUPP applies to hooked mail: read and execute instructions
- Two use cases: hook existing mail, create+hook via gt handoff
- Role-specific examples for each agent type
Templates updated:
- boot.md.tmpl
- crew.md.tmpl
- deacon.md.tmpl
- mayor.md.tmpl
- polecat.md.tmpl
- refinery.md.tmpl
- witness.md.tmpl
Also updated prime.go fallback output functions to include hookable mail
reference for when templates fail to render.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The gt hook command was using --status=pinned while gt sling and the rest
of the codebase use --status=hooked. This inconsistency meant gt hook would
not find beads hooked by gt sling, and vice versa.
Changes:
- hook.go: Use beads.StatusHooked instead of beads.StatusPinned
- hook.go: Update bd update command to use --status=hooked
- unsling.go: Use beads.StatusHooked when finding hooked beads
- Update error messages and comments to say "hooked" instead of "pinned"
This fix ensures gt hook works uniformly for all bead types (molecules,
issues, mail beads) since they all use the same beads system.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When slinging work from town beads (hq-*) to a polecat whose agent bead
is in rig beads (gt-*), the hook_bead update was silently failing because
bd couldn't find the cross-beads reference.
Changes:
- sling.go: Use town root for routing instead of cwd, enabling cross-beads
resolution via routes.jsonl. Log warnings on failure instead of silent ignore.
- done.go: Use townRoot (already available) instead of cwd for beads client.
Log warnings on failure for both state and cleanup status updates.
Root cause: The beads client was created from current working directory,
which may not have access to routes.jsonl for cross-prefix resolution.
Town root always has routes.jsonl for proper prefix → rig directory mapping.
(gt-ohqxq)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add heartbeat checking to Boot degraded triage: detects stale Deacon
heartbeat (>15min nudges, >30min restarts)
- Add checkDeaconHeartbeat to daemon heartbeat cycle as fallback
- This ensures the Deacon is monitored continuously, not just at startup
The mol-deacon-patrol formula was also updated separately to use
gt deacon health-check instead of ephemeral context memory tracking.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The refinery was checking git branches instead of the beads merge queue.
This caused MRs to pile up when branches were deleted but MR beads remained.
- manager.go: Queue() now queries beads for type=merge-request issues
- refinery.md.tmpl: Updated queue-scan to use gt mq list
- mol-refinery-patrol.formula.toml: Updated queue-scan step instructions
Major redesign based on design review:
1. REMOVED: Claude Code internal parsing (ZFC violation)
- Deleted internal/claude/sessions.go (parsed ~/.claude/projects/)
- This coupled us to Claude Code's undocumented internal format
2. ADDED: Event-based session discovery
- gt prime now emits session_start events to ~/gt/.events.jsonl
- Events include role, session_id, topic, cwd
- Discovery reads our own event stream (ZFC-compliant)
3. ADDED: --talk flag for actual seances
- gt seance --talk <session-id> spawns: claude --fork-session --resume <id>
- --fork-session creates a new session (read-only, no grave disturbance)
- You literally talk to your predecessor: "Where did you put X?"
4. ADDED: One-shot prompt mode
- gt seance --talk <id> -p "Where is the config?"
- Uses claude --print for quick questions
The name "seance" is now literal - you commune with the dead (past sessions).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The runSlingFormula function was calling bd wisp which does not exist.
The correct command is bd mol wisp for creating ephemeral molecules.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Parses Claude Code ~/.claude/projects/ to find Gas Town sessions.
Sessions are identified by the [GAS TOWN] beacon in startup messages.
Features:
- Filter by role (crew, polecat, witness, etc.)
- Filter by rig name
- Show recent N sessions
- JSON output for scripting
- Sorts by most recent first
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
getTrackedIssues was spawning a separate bd show subprocess for each
tracked issue. With 10 convoys x 5 issues = 50+ subprocesses per poll.
Solution: Use bd show batch capability (bd show id1 id2 id3 --json)
to fetch all issue details in a single call. Falls back to individual
lookups if the batch fails (e.g., invalid IDs).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds context timeouts to bd and sqlite3 calls in the convoy panel TUI.
If these commands hang, the TUI will no longer freeze - it will timeout
after 5 seconds and return empty/error state.
Functions updated:
- listConvoys: bd list with context timeout
- getTrackedIssueStatus: sqlite3 query with context timeout
- getIssueStatus: bd show with context timeout
(gt-14xej)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Instead of hardcoding the rig list (gastown, beads), now loads rigs
from mayor/rigs.json using config.LoadRigsConfig. Falls back gracefully
to just checking global agents if the config cannot be loaded.
(gt-mmp0q)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds a third panel to the feed TUI showing:
- In-progress convoys with progress bars (completed/total)
- Recently landed convoys (last 24h) with time since landing
Features:
- Panel cycles with tab: tree -> convoy -> feed
- Direct access via 1/2/3 number keys
- Auto-refresh every 10 seconds
- Styled progress indicators (●●○○)
The convoy panel bridges the gap between "WHO is working" (agent tree)
and "WHAT is happening" (event feed) by showing "WHAT IS SHIPPING".
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add RuntimeConfig type to RigSettings allowing per-rig LLM runtime
configuration. This moves hardcoded "claude --dangerously-skip-permissions"
invocations to configurable settings.
Changes:
- Add RuntimeConfig type with Command, Args, InitialPrompt fields
- Add BuildCommand() and BuildCommandWithPrompt() methods
- Add helper functions: LoadRuntimeConfig, BuildAgentStartupCommand,
BuildPolecatStartupCommand, BuildCrewStartupCommand
- Update startup paths in up.go and mayor.go to use new config
- Add comprehensive tests for RuntimeConfig functionality
Remaining hardcoded invocations can be updated incrementally.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The getCleanupStatus function in witness/handlers.go and crew removal
in cmd/crew_lifecycle.go were constructing agent bead IDs with hardcoded
"gt-" prefix. This failed for rigs that use a different prefix like "bd-".
Now uses beads.GetPrefixForRig to look up the correct prefix from
routes.jsonl, enabling support for the beads rig and any future rigs
with custom prefixes.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The command now refuses to nuke a polecat unless it passes safety checks:
1. Worktree has no unpushed/uncommitted changes
2. Polecat has no open merge request beads
3. Polecat has no work on its hook
Use --force to bypass these checks (loses work).
Use --dry-run to see safety check status before nuking.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Creates internal/session/startup.go with StartupNudgeConfig struct
and StartupNudge function. Format becomes session title in /resume picker:
[GAS TOWN] recipient <- sender • timestamp • topic[:mol-id]
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
SendKeys has an Enter-concatenation bug that causes the nudge to fail.
NudgeSession is the canonical way to message Claude and works reliably.
Fixes cold starts of crew workers (gt crew start).
(gt-7swyi)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add NudgeChannels field to MessagingConfig struct in types.go
- Initialize NudgeChannels map in NewMessagingConfig()
- Add validation in validateMessagingConfig(): channel names must be
non-empty and each channel must have at least one recipient
- Add tests for valid nudge channels and empty recipient validation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements queue message delivery in internal/mail/router.go:
- Validates queue exists via expandQueue()
- Creates single message (no fan-out unlike lists)
- Stores in town-level beads with queue metadata label
- Uses queue:name as assignee for inbox filtering
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds actual git merge functionality to ProcessMR and ProcessMRFromQueue:
- Fetch source branch from origin
- Checkout target branch and pull latest
- Check for merge conflicts using test merge
- Run configured tests with retry support
- Perform --no-ff merge with descriptive message
- Push to origin
- Return detailed ProcessResult with success/conflict/test status
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When adding a dog, creates an agent bead with role_type:dog label.
When removing a dog, deletes the corresponding agent bead.
This enables @dogs group resolution in the mail router by allowing
queries like `bd list --type=agent --label=role_type:dog`.
Changes:
- Add DogBeadID(), DogRoleBeadID() helper functions
- Add CreateDogAgentBead() for creating dog agent beads with labels
- Add FindDogAgentBead() and DeleteDogAgentBead() for cleanup
- Add Labels field to Issue struct for label parsing
- Update ParseAgentBeadID() to handle dog bead IDs (gt-dog-<name>)
- Update IsAgentSessionBead() to include "dog" as valid role
(gt-qha0g)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
After confirming remote branch exists via ls-remote, fetch to ensure
the local origin/branch ref exists before using it in rev-list comparison.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
