Fresh installs and rig adds were creating full CLAUDE.md files (285 lines
for mayor, ~100 lines for other roles), causing gt doctor to fail the
priming check immediately.
Per the priming architecture, CLAUDE.md should be a minimal bootstrap
pointer (<30 lines) that tells agents to run gt prime. Full context is
injected ephemerally at session start.
Changes:
- install.go: createMayorCLAUDEmd now writes 12-line bootstrap pointer
- manager.go: createRoleCLAUDEmd now writes role-specific bootstrap pointers
for mayor, refinery, crew, and polecat roles
Note: The AGENTS.md issue mentioned in #316 could not be reproduced - the
code does not appear to create AGENTS.md at rig level. May be from an older
version or different configuration.
Partial fix for #316
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Phase 1 of dynamic priming subsystem:
1. PRIME.md provisioning for all workers (hq-5z76w, hq-ukjrr Part A)
- Added ProvisionPrimeMD to beads package with Gas Town context template
- Provision at rig level in AddRig() so all workers inherit it
- Added fallback provisioning in crew and polecat managers
- Created PRIME.md for existing rigs
2. Post-handoff detection to prevent handoff loop bug (hq-ukjrr Part B)
- Added FileHandoffMarker constant (.runtime/handoff_to_successor)
- gt handoff writes marker before respawn
- gt prime detects marker and outputs "HANDOFF COMPLETE" warning
- Marker cleared after detection to prevent duplicate warnings
3. Priming health checks for gt doctor (hq-5scnt)
- New priming_check.go validates priming subsystem configuration
- Checks: SessionStart hook, gt prime command, PRIME.md presence
- Warns if CLAUDE.md is too large (should be bootstrap pointer)
- Fixable: provisions missing PRIME.md files
This ensures crew workers get Gas Town context (GUPP, hooks, propulsion)
even if the gt prime hook fails, via bd prime fallback.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add BeadsCustomTypes constant ("agent,role,rig,convoy,slot") to avoid
hardcoded strings scattered across the codebase
- Add CustomTypesCheck to gt doctor that verifies Gas Town custom types
are registered with beads, with --fix support
- Register custom types during gt init (best-effort, skips if no beads)
- Update install.go, rig_check.go, and rig/manager.go to use the constant
This ensures consistent type registration across all code paths and
catches misconfigured beads databases via gt doctor.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds support for alternative AI runtime backends (Codex, OpenCode) alongside
the default Claude backend through a runtime abstraction layer.
- internal/runtime/runtime.go - Runtime-agnostic helper functions
- Extended RuntimeConfig with provider-specific settings
- internal/opencode/ for OpenCode plugin support
- Updated session managers to use runtime abstraction
- Removed unused ensureXxxSession functions
- Fixed daemon.go indentation, updated terminology to runtime
Backward compatible: Claude remains default runtime.
Co-Authored-By: Ben Kraus <ben@cinematicsoftware.com>
Co-Authored-By: Cameron Palmer <cameronmpalmer@users.noreply.github.com>
* feat: add Cursor Agent as compatible agent for Gas Town
Add AgentCursor preset with ProcessNames field for multi-agent detection:
- AgentCursor preset: cursor-agent -p -f (headless + force mode)
- ProcessNames field on AgentPresetInfo for agent detection
- IsAgentRunning(session, processNames) in tmux package
- GetProcessNames(agentName) helper function
Closes: ga-vwr
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* refactor: centralize agent preset list in config.go
Replace hardcoded ["claude", "gemini", "codex"] arrays with calls to
config.ListAgentPresets() to dynamically include all registered agents.
This fixes cursor agent not appearing in `gt config agent list` and
ensures new agent presets are automatically included everywhere.
Also updated doc comments to include "cursor" in example lists.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* test: add comprehensive agent client tests
Add tests for agent detection and command generation:
- TestIsAgentRunning: validates process name detection for all agents
(claude/node, gemini, codex, cursor-agent)
- TestIsAgentRunning_NonexistentSession: edge case handling
- TestIsClaudeRunning: backwards compatibility wrapper
- TestListAgentPresetsMatchesConstants: ensures ListAgentPresets()
returns all AgentPreset constants
- TestAgentCommandGeneration: validates full command line generation
for all supported agents
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat: add Auggie agent, fix Cursor interactive mode
Add Auggie CLI as supported agent:
- Command: auggie
- Args: --allow-indexing
- Supports session resume via --resume flag
Fix Cursor agent configuration:
- Remove -p flag (requires prompt, breaks interactive mode)
- Clear SessionIDEnv (cursor uses --resume with chatId directly)
- Keep -f flag for force/YOLO mode
Updated all test cases for both agents.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat(agents): add Sourcegraph AMP as agent preset
Add AgentAmp constant and builtinPresets entry for Sourcegraph AMP CLI.
Configuration:
- Command: amp
- Args: --dangerously-allow-all --no-ide
- ResumeStyle: subcommand (amp threads continue <threadId>)
- ProcessNames: amp
Closes: ga-guq
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: lint error in cleanBeadsRuntimeFiles
Change function to not return error (was always nil).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: beads v0.46.0 compatibility and test fixes
- Add custom types config (agent,role,rig,convoy,event) after bd init calls
- Fix tmux_test.go to use variadic IsAgentRunning signature
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* docs: update agent documentation for new presets
- README.md: Update agent examples to show cursor/auggie, add built-in presets list
- docs/reference.md: Add cursor, auggie, amp to built-in agents list
- CHANGELOG.md: Add entry for new agent presets under [Unreleased]
Addresses PR #247 review feedback.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Refactors all agent startup paths (witness, refinery, crew, polecat) to use
a consistent Manager interface with Start(), Stop(), IsRunning(), and
SessionName() methods.
Includes:
- Witness manager with GUPP propulsion nudge for startup
- Refinery manager for engineer sessions
- Crew manager for worker agents
- Session/polecat manager updates
- claude_settings_check doctor check for settings validation
- Settings management consolidated from rig/manager.go
- Settings location moved outside source repos to prevent conflicts
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Resolved conflict in internal/witness/manager.go:
- Kept session import (used by PR code)
- Kept PR's more accurate comment for PID check
- Removed duplicate sessionName method introduced by merge
* feat: Beads redirect architecture for tracked and local beads
This change implements proper redirect handling so that all rig agents
(Witness, Refinery, Crew, Polecats) can work with both:
- Tracked beads: .beads/ checked into git at mayor/rig/.beads
- Local beads: .beads/ created at rig root during gt rig add
Key changes:
1. SetupRedirect now handles tracked beads by skipping redirect chains.
The bd CLI doesn't support chains (A→B→C), so worktrees redirect
directly to the final destination (mayor/rig/.beads for tracked).
2. ResolveBeadsDir is now used consistently in polecat and refinery
managers instead of hardcoded mayor/rig paths.
3. Rig-level agents (witness, refinery) now use rig beads with rig
prefix instead of town beads. This follows the architecture where
town beads are only for Mayor/Deacon.
4. prime.go simplified to always use ../../.beads for crew redirects,
letting rig-level redirect handle tracked vs local routing.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat(doctor): Add beads-redirect check for tracked beads
When a repo has .beads/ tracked in git (at mayor/rig/.beads), the rig root
needs a redirect file pointing to that location. This check:
- Detects missing rig-level redirect for tracked beads
- Verifies redirect points to correct location (mayor/rig/.beads)
- Auto-fixes with 'gt doctor --fix'
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: Handle fileLock.Unlock error in daemon
Wrap fileLock.Unlock() return value to satisfy errcheck linter.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
This prevents .repo.git/ directories from showing up as untracked files
in town git status.
Changes:
- manager.go: Add .repo.git/ to rig .gitignore during setup
Settings creation was scattered across multiple places (createPatrolHooks,
ensurePatrolHooks, inline code). Now unified via claude.EnsureSettingsForRole().
Changes:
- Add "deacon" to autonomous roles in claude/settings.go
- Remove ensurePatrolHooks() from cmd/deacon.go, use EnsureSettingsForRole
- Remove createPatrolHooks() from rig/manager.go (no longer needed at rig add)
- Add EnsureSettingsForRole call in crew_lifecycle.go
- Add doctor check for stale/missing Claude settings files
- Wire up claude-settings check in cmd/doctor.go
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add AppendRouteToDir helper and use it to add hq-* route during rig
initialization. This allows rig beads to resolve role beads and other
hq-* prefixed beads stored in town beads.
Uses safe append pattern (load, merge, write) instead of overwriting
to avoid clobbering future rig routes.
Supersedes PR #184 with proper implementation.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Per docs/architecture.md, Witness and Refinery are rig-level agents that
should use the rig's configured prefix (e.g., pi- for pixelforge) instead
of hardcoded "gt-".
This extends PR #183's creation fix to also fix all lookup paths:
- internal/rig/manager.go: Create agent beads in rig beads with rig prefix
- internal/daemon/daemon.go: Use rig prefix when looking up agent state
- internal/daemon/lifecycle.go: Use rig prefix for identity-to-bead mapping
- internal/cmd/sling.go: Pass townRoot for prefix lookup
- internal/cmd/unsling.go: Pass townRoot for prefix lookup
- internal/cmd/molecule_status.go: Use rig prefix for agent bead lookups
- internal/cmd/molecule_attach.go: Use rig prefix for agent bead lookups
- internal/config/loader.go: Add GetRigPrefix helper
Without this fix, the daemon would:
- Create pi-gastown-witness but look for gt-gastown-witness
- Report agents as missing/dead when they are running
- Fail to manage agent lifecycle correctly
Based on work by Johann Taberlet in PR #183.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Johann Taberlet <johann.taberlet@gmail.com>
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add DefaultBranch field to RoleData struct
- Update refinery.md.tmpl to use {{ .DefaultBranch }} template variable
- Populate DefaultBranch from rig config in prime.go and rig/manager.go
- Default to 'main' if not configured
- Add test verifying DefaultBranch rendering in refinery template
Fixes issue where refinery agents merged to master instead of the
configured default branch (e.g., 'develop' or 'develop-cstar').
- DiscoverRigs() now logs failed rig loads to stderr instead of silently
continuing
- AddRig warnings now output to stderr instead of stdout, matching the
codebase convention for non-fatal warnings
- Added clarifying comment for best-effort git ref update in worktree
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add isValidBeadsPrefix() to validate prefix format before passing to
exec.Command. Prefixes from config files (detectBeadsPrefixFromConfig)
are now validated to contain only alphanumeric and hyphen characters,
start with a letter, and be max 20 chars.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add --branch flag to `gt rig add` to specify a custom default branch
instead of auto-detecting from remote. This supports repositories that
use non-standard default branches like `develop` or `release`.
Changes:
- Add --branch flag to `gt rig add` command
- Store default_branch in rig config.json
- Propagate default branch to refinery, witness, daemon, and all commands
- Rename ensureMainBranch to ensureDefaultBranch for clarity
- Add Rig.DefaultBranch() method for consistent access
- Update crew/manager.go and swarm/manager.go to use rig config
Based on PR #49 by @kustrun - rebased and extended with additional fixes.
Co-authored-by: kustrun <kustrun@users.noreply.github.com>
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use underscores instead of stripping invalid characters
- Convert suggestion to lowercase for consistency
- Explicitly state that underscores are allowed
Before: "MyProject.jl" → "MyProjectjl"
After: "MyProject.jl" → "myproject_jl"
Closes#97
Co-Authored-By: Olivier Debeuf De Rijcker <markov-kernel@users.noreply.github.com>
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The isFirstRig parameter was no longer used - it was being assigned
to a blank identifier. Since initAgentBeads is an internal function
with only 2 callers in this repo, remove the parameter entirely.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Agent directories (witness/, refinery/, mayor/) contained state.json files
with last_active timestamps that were never updated, making them stale and
misleading. This change removes:
- initAgentStates function that created vestigial state.json files
- AgentState type and related Load/Save functions from config package
- MayorStateValidCheck from doctor checks
- requesting_* lifecycle verification (dead code - flags were never set)
- FileStateJSON constant and MayorStatePath function
Kept intact:
- daemon/state.json (actively used for daemon runtime state)
- crew/<name>/state.json (operational CrewWorker metadata)
- Agent state tracking via beads (the ZFC-compliant approach)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Phase 5 of epic gt-4r1ph (align agent/role beads with two-level architecture):
- Create docs/architecture.md with agent bead storage table documenting
the correct two-level architecture:
- Town beads (~/gt/.beads/): hq-mayor, hq-deacon, hq-*-role
- Rig beads (<rig>/.beads/): <prefix>-<rig>-witness, <prefix>-<rig>-refinery
- Update internal/rig/manager.go initAgentBeads() comments with MIGRATION
NOTEs explaining current state vs target architecture (gt-4r1ph)
- Close PR #50 with explanation that the fix direction was wrong
CLAUDE.md templates already correctly document hq-* for town beads and
project prefix for rig beads.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Phase 1: Create agent_ids.go with town-level bead ID helpers
- MayorBeadIDTown(), DeaconBeadIDTown(), DogBeadIDTown()
- RoleBeadIDTown() and role-specific helpers (hq-*-role)
- Add deprecation notices to old gt-* prefix functions
Phase 2: Create town-level agent beads during gt install
- initTownAgentBeads() creates hq-mayor, hq-deacon agent beads
- Creates role beads: hq-mayor-role, hq-deacon-role, etc.
- Update rig/manager.go to use rig beads for Witness/Refinery
This aligns with the two-level beads architecture:
- Town beads (~/gt/.beads/): hq-* prefix for Mayor, Deacon, roles
- Rig beads (<rig>/.beads/): <prefix>-* for Witness, Refinery, Polecats
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add progress feedback during slow clone operations (30+ seconds)
- Fix README Quick Start to match actual workflow (--git flag, crew add)
- Update install output to use 'gt mayor attach' consistently
- Clarify "Next steps" wording in rig add output
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Session names `gt-mayor` and `gt-deacon` were hardcoded, causing tmux
session name collisions when running multiple towns simultaneously.
Changed to `gt-{town}-mayor` and `gt-{town}-deacon` format (e.g.,
`gt-ai-mayor`) to allow concurrent multi-town operation.
Key changes:
- session.MayorSessionName() and DeaconSessionName() now take townName param
- Added workspace.GetTownName() helper to load town name from config
- Updated all callers in cmd/, daemon/, doctor/, mail/, rig/, templates/
- Updated tests with new session name format
- Bead IDs remain unchanged (already scoped by .beads/ directory)
Fixes#60🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use git --reference-if-able when a local repo is provided so rigs and crew share objects without changing remotes.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Merged with conflict resolution after PR #34. Key fixes:
- Remove invalid --no-agents flag from bd init
- Agent beads now created in town beads (gt-* prefix) using NewWithBeadsDir
- Use canonical WitnessBeadID/RefineryBeadID functions
- Update test to verify town beads usage
Original PR by @PepijnSenders, conflict resolution applied.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Three issues were causing errors when running `gt rig add`:
1. **bd init flag**: Removed non-existent `--no-agents` flag from bd init
command that was causing silent failures.
2. **BEADS_DIR for init**: Added explicit BEADS_DIR to bd init and migrate
commands to prevent bd from finding parent directory databases.
3. **Agent beads location**: Agent beads now go in town beads (gt-* prefix)
instead of rig beads. This is necessary because:
- Agent IDs use canonical gt-* prefix (e.g., gt-tribal-witness)
- Rig beads use rig-specific prefixes (e.g., tr-*)
- bd strictly validates ID prefix against database prefix
- Town beads must be initialized with `gt` prefix
4. **beads.run() BEADS_DIR**: Modified to explicitly pass BEADS_DIR in child
process environment to ensure bd uses the correct database.
5. **Agent ID prefix**: Use WitnessBeadID/RefineryBeadID (canonical gt-*)
instead of WithPrefix variants.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
When cloning a repo that has .beads/ tracked in git, the beads.db file
is missing (gitignored) but issues.jsonl exists. The bd commands fail
with "prefix mismatch" because:
1. No beads.db means no prefix config stored
2. bd falls back to walking up to find a database
3. Finds town-level database with 'hq-' prefix
Fix: After detecting the source repo's prefix from config.yaml or issues,
run 'bd init --prefix <prefix>' to create the database and auto-import
from issues.jsonl. Also updated initAgentBeads to use the correct beads
location (mayor/rig/.beads for repos with tracked beads).
When adding a rig from a source repo that has .beads/ tracked in git,
detect and use the project's existing prefix instead of generating a
new one. This prevents prefix mismatch errors when accessing existing
issues via bd commands.
Adds detectBeadsPrefixFromConfig() which reads the prefix from either
config.yaml or by parsing the first issue ID from issues.jsonl.
Add validation in Manager.AddRig() to reject rig names containing
characters that break agent ID parsing. Agent IDs use format
<prefix>-<rig>-<role>[-<name>] with hyphens as delimiters, so
hyphenated rig names like op-baby cause parsing failures.
The validation rejects hyphens, dots, and spaces, and suggests a
sanitized alternative in the error message.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
initAgentBeads and crew_add were looking for beads at mayor/rig/.beads/
but during initial creation, beads is at rig root. The redirect
mechanism to mayor/rig/.beads/ gets set up later.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Retry bd init without --no-agents when the flag is unsupported, and ensure agent bead creation uses the rig .beads directory to avoid prefix mismatches.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Delete 5 legacy .formula.yaml files (have .toml replacements)
- Remove unused FileConfigYAML constant
- Add TODO for beads config.yaml → config.json migration (bd-10wg)
- Update docs to use JSON examples instead of yaml code blocks
- Change plugin frontmatter from YAML to TOML in docs
- Add .toml to code file detection in branch_check.go
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rig add now creates empty crew/ directory with README
- Crew members must be added explicitly with 'gt crew add <name>'
- Removed --crew flag from rig add command
- Updated help text and output to reflect new behavior
This gives users control over crew member names rather than defaulting to 'max'.
- Add DefaultBranch() method to git package to detect repo's default branch
- Store default_branch in rig config.json
- Use detected branch for refinery worktree instead of hardcoding 'main'
- Add LoadRigConfig() to read rig config
- Display correct branch name in rig add output
Fixes wyvern rig creation (uses 'master' not 'main').
Implements canonical naming convention for agent bead IDs:
- Town-level: gt-mayor, gt-deacon (unchanged)
- Rig-level: gt-<rig>-witness, gt-<rig>-refinery (was gt-witness-<rig>)
- Named: gt-<rig>-crew-<name>, gt-<rig>-polecat-<name> (was gt-crew-<rig>-<name>)
Changes:
- Added AgentBeadID helper functions to internal/beads/beads.go
- Updated all ID generation call sites to use helpers
- Fixed session parsing in theme.go, statusline.go, agents.go
- Updated doctor check and fix to use canonical format
- Updated tests for new format
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
All agent bead creation now uses shared role beads:
- gt-mayor-role, gt-deacon-role
- gt-witness-role, gt-refinery-role
- gt-crew-role, gt-polecat-role
Previous code created per-instance role bead references like
gt-witness-gastown-role which is wrong. Role beads are shared
class definitions, not per-instance.
Files fixed:
- internal/rig/manager.go
- internal/doctor/agent_beads_check.go
- internal/cmd/prime.go
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt rig add now creates .claude/settings.json with patrol hooks for:
- witness/ directory (SessionStart, PreCompact, UserPromptSubmit hooks)
- refinery/ directory (same hooks)
gt deacon start also creates hooks if not present (idempotent).
These hooks run `gt prime && gt mail check --inject` on session start,
enabling autonomous patrol execution when daemon sends heartbeats.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added comments explaining that RoleBead establishes a naming convention
for the canonical location of role definitions. The referenced bead may
not exist yet - this enables tooling like gt doctor to check for and
scaffold missing role beads.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Bootstrap now creates agent beads for ZFC compliance:
- Always: <prefix>-witness-<rig>, <prefix>-refinery-<rig>
- First rig only: <prefix>-deacon, <prefix>-mayor
Agent beads are created in the rig's beads database (not town beads)
because the daemon looks up beads by prefix routing.
Changes:
- internal/rig/manager.go: Added initAgentBeads() function
- internal/cmd/install.go: Added comment explaining why beads aren't
created here (no rig exists yet at install time)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
bd defaults to $BD_ACTOR → git config user.name → $USER, which is
more accurate for system tools like doctor and rig init.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
