Adds mark-read and mark-unread commands that allow marking messages
as read without archiving them. Uses a "read" label to track status.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Makes PR rules conditional on repo ownership instead of absolute ban.
Non-maintainer repos may require PRs for external contributors.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- shiny.formula.toml: defers to role's git workflow instead of hardcoding PR
- crew.md.tmpl: checks remote origin ownership instead of absolute PR ban
- tmux.go: minor comment fix
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The previous NEVER create GitHub PRs language was too weak. Strengthened to:
- ABSOLUTELY FORBIDDEN header
- This is not negotiable
- Explicit STOP if about to run gh pr create
- Clarified PR Sheriff reviews incoming PRs, does not create them
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
NudgeSession and NudgePane now send Escape key before Enter to exit
vim INSERT mode if enabled. Harmless in normal mode.
Fixes#307
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Remove references to idle state. Polecats self-nuke after work - there is
no idle state. The Witness handles crash recovery and orphan cleanup.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Issue #336: Consolidate down/shutdown/stop commands
Changes:
- Add `gt down --polecats` flag to stop all polecat sessions
- Deprecate `gt stop` command (prints warning, directs to `gt down --polecats`)
- Update help text to clarify down vs shutdown distinction:
- down = pause (reversible, keeps worktrees)
- shutdown = done (permanent cleanup)
- Integrate --polecats with new --dry-run mode from recent PR
Note: The issue proposed renaming --nuke to --tmux, but PR #330 just
landed with --nuke having better safety (GT_NUKE_ACKNOWLEDGED env var),
so keeping --nuke as-is. The new --polecats flag absorbs gt stop
functionality as proposed.
Closes#336
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a polecat is nuked and re-spawned with the same name, CreateAgentBead
fails with a UNIQUE constraint error because the old agent bead exists as
a tombstone.
This adds CreateOrReopenAgentBead that:
1. First tries to create the agent bead normally
2. If UNIQUE constraint fails, reopens the existing bead and updates fields
Updated both spawn paths in polecat manager to use the new function.
Fixes#332
Co-authored-by: Claude <noreply@anthropic.com>
* fix(down): add refinery shutdown to gt down
Refineries were not being stopped by gt down, causing them to continue
running after shutdown. This adds a refinery shutdown loop before
witnesses, fixing problem P3 from the v2.4 proposal.
Changes:
- Add Phase 1: Stop refineries (gt-<rig>-refinery sessions)
- Renumber existing phases (witnesses now Phase 2, etc.)
- Include refineries in halt event logging
* feat(beads): add StopAllBdProcesses for shutdown
Add functions to stop bd daemon and bd activity processes:
- StopAllBdProcesses(dryRun, force) - main entry point
- CountBdDaemons() - count running bd daemons
- CountBdActivityProcesses() - count running bd activity processes
- stopBdDaemons() - uses bd daemon killall
- stopBdActivityProcesses() - SIGTERM->wait->SIGKILL pattern
This solves problems P1 (bd daemon respawns sessions) and P2 (bd activity
causes instant wakeups) from the v2.4 proposal.
* feat(down): rename --all to --nuke, add new --all and --dry-run flags
BREAKING CHANGE: --all now stops bd processes instead of killing tmux server.
Use --nuke for the old --all behavior (killing the entire tmux server).
New flags:
- --all: Stop bd daemons/activity processes and verify shutdown
- --nuke: Kill entire tmux server (DESTRUCTIVE, with warning)
- --dry-run: Preview what would be stopped without taking action
This solves problem P4 (old --all was too destructive) from the v2.4 proposal.
The --nuke flag now requires GT_NUKE_ACKNOWLEDGED=1 environment variable
to suppress the warning about destroying all tmux sessions.
* feat(down): add shutdown lock to prevent concurrent runs
Add Phase 0 that acquires a file lock before shutdown to prevent race
conditions when multiple gt down commands are run concurrently.
- Uses gofrs/flock for cross-platform file locking
- Lock file stored at ~/gt/daemon/shutdown.lock
- 5 second timeout with 100ms retry interval
- Lock released via defer on successful acquisition
- Dry-run mode skips lock acquisition
This solves problem P6 (concurrent shutdown race) from the v2.4 proposal.
* feat(down): add verification phase for respawn detection
Add Phase 5 that verifies shutdown was complete after stopping all services:
- Waits 500ms for processes to fully terminate
- Checks for respawned bd daemons
- Checks for respawned bd activity processes
- Checks for remaining gt-*/hq-* tmux sessions
- Checks if daemon PID is still running
If anything respawned, warns user and suggests checking systemd/launchd.
This solves problem P5 (no verification) from the v2.4 proposal.
* test(down): add unit tests for shutdown functionality
Add tests for:
- parseBdDaemonCount() - array, object with count, object with daemons, empty, invalid
- CountBdActivityProcesses() - integration test
- CountBdDaemons() - integration test (skipped if bd not installed)
- StopAllBdProcesses() - dry-run mode test
- isProcessRunning() - current process, invalid PID, max PID
These tests cover the core parsing and process detection logic added
in the v2.4 shutdown enhancement.
* fix(review): add tmux check and pkill fallback for bd shutdown
Address review gaps against proposal v2.4 AC:
- AC1: Add tmux availability check BEFORE acquiring shutdown lock
- AC2: Add pkill fallback for bd daemon when killall incomplete
- AC2: Return remaining count from stop functions for error reporting
- Style: interface{} → any (Go 1.18+)
* fix(prime): add validation for --state flag combination
The --state flag should be standalone and not combined with other flags.
Add validation at start of runPrime to enforce this.
Fixes TestPrimeFlagCombinations test failures.
* fix(review): address bot review critical issues
- isProcessRunning: handle pid<=0 as invalid (return false)
- isProcessRunning: handle EPERM as process exists (return true)
- stopBdDaemons: prevent negative killed count from race conditions
- stopBdActivityProcesses: prevent negative killed count from race conditions
* fix(review): critical fixes from deep review
Platform fixes:
- CountBdActivityProcesses: use sh -c "pgrep | wc -l" for macOS compatibility
(pgrep -c flag not available on BSD/macOS)
Correctness fixes:
- stopSession: return (wasRunning, error) to distinguish "stopped" vs "not running"
- daemon.IsRunning: handle error instead of ignoring with blank identifier
- stopBdDaemons/stopBdActivityProcesses: guard against negative killed counts
Safety fixes:
- --nuke: require GT_NUKE_ACKNOWLEDGED=1, don't just warn and proceed
- pkill patterns: document limitation about broad matching
Code cleanup:
- EnsureBdDaemonHealth: remove unused issues variable
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Updated comment to use "orphaned polecats" instead of "idle polecats".
With the self-cleaning model, polecats self-nuke on completion.
An orphan is from a crash, not a normal idle state.
Closes: gt-7l8y1
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The comment incorrectly referred to polecats without hooked work as "idle".
With the self-cleaning model, polecats self-nuke on completion - there are
no idle polecats. A polecat without work is orphaned (needs cleanup).
Closes: gt-0jn0k
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The swarm dispatch command now always spawns fresh polecats instead of
searching for idle ones to reuse. With the self-cleaning model, polecats
self-nuke when done - there are no idle polecats to reuse.
Closes: gt-h4yc3
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a polecat runs `gt done` with COMPLETED status, it now nukes its own
worktree before exiting. This is the self-cleaning model - polecats clean
up after themselves, reducing Witness/Deacon cleanup burden.
The self-nuke is:
- Only attempted for polecats (not Mayor/Witness/Deacon/Refinery)
- Only on COMPLETED status (not ESCALATED/DEFERRED)
- Non-fatal: if it fails, Witness will handle cleanup
Closes: gt-fqcst
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt done now always exits the session. The --exit flag is removed since
exit is the only sensible behavior - polecats don't stay alive after
signaling completion.
Closes: gt-yrz4k
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The --state flag is meant for quick state checks and cannot be
combined with --hook, --dry-run, or --explain flags.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Extract prime.go into focused files:
- prime_session.go: session ID handling, hooks, persistence
- prime_output.go: all output/rendering functions
- prime_molecule.go: molecule workflow context
- prime_state.go: handoff markers, session state detection
Main prime.go now ~730 lines with core flow visible as "table of contents".
No behavior changes - pure file organization following Go idioms.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
IsClaudeRunning now checks for child processes when the pane command is
a shell (bash/zsh). This fixes gt crew start --all killing running crew
members that were started with "export ... && claude ..." commands.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a rig is added with --branch <non-default>, polecats and dogs now
correctly create worktrees from origin/<configured-branch> instead of
always using main/HEAD.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
The witness manager was using rig-level beads path to look up role
configuration, but role beads use the hq- prefix and live in town-level
beads. This caused "unexpected end of JSON input" errors when starting
witnesses because the rig database (with gt- prefix) couldn't find
hq-witness-role.
Changed roleConfig() to use townRoot instead of rig.BeadsPath() to
correctly resolve town-level role beads.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
CreateAgentBead was creating beads with only --labels=gt:agent but
bd create defaults to --type=task. The bd slot set command requires
type=agent to set slots, causing warnings during gt install and
gt rig add.
Fixes#315
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
AGENTS.md had grown to 50 lines (above the 20-line bootstrap pointer
threshold) after dependency management docs were added in commit 14085db3.
The "Landing the Plane" and "Dependency Management" content belongs in
role templates (injected by gt prime), not in the on-disk bootstrap pointer.
This completes the fix for #316 - the AGENTS.md issue was caused by the
source repo having a large AGENTS.md that got cloned into rigs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Fresh installs and rig adds were creating full CLAUDE.md files (285 lines
for mayor, ~100 lines for other roles), causing gt doctor to fail the
priming check immediately.
Per the priming architecture, CLAUDE.md should be a minimal bootstrap
pointer (<30 lines) that tells agents to run gt prime. Full context is
injected ephemerally at session start.
Changes:
- install.go: createMayorCLAUDEmd now writes 12-line bootstrap pointer
- manager.go: createRoleCLAUDEmd now writes role-specific bootstrap pointers
for mayor, refinery, crew, and polecat roles
Note: The AGENTS.md issue mentioned in #316 could not be reproduced - the
code does not appear to create AGENTS.md at rig level. May be from an older
version or different configuration.
Partial fix for #316
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Polecats were burning 48k+ tokens on exploratory work when spawned because
the startup beacon was informational-only. By the time the propulsion nudge
arrived 2 seconds later, the agent had already started exploring.
The handoff topic already had explicit instructions; this adds the same
pattern for assigned work: "Work is on your hook. Run gt hook now."
Fixes#319
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add t.Parallel() calls across config and rig test files to enable
concurrent test execution and faster test runs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add three new flags to gt prime command:
- --state: Output role state as JSON and exit early (for scripting)
- --dry-run: Skip side effects (persistence, locks, events)
- --explain: Show verbose role detection reasoning
The --state flag is mutually exclusive with all other flags and errors
if combined. The other flags (--dry-run, --explain, --hook) can be
combined freely.
Also fixes missing filepath import in beads.go.
Closes: bd-t8ven
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The AGENTS.md file at rig level (e.g., gastown/AGENTS.md) should be a thin
bootstrap pointer (<20 lines), not full context. This adds a check in
checkRigPriming() to flag large AGENTS.md files, similar to how CLAUDE.md
is checked in checkAgentPriming().
Also fixes missing filepath import in beads.go that was breaking the build.
Closes: bd-mfrs6
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
detectSessionState() and checkSlungWork() both contained identical
logic for finding hooked/in_progress beads assigned to an agent.
Extracted this into findHookedBead() helper function.
Also includes priming subsystem improvements from mayor:
- Add --dry-run flag for testing without side effects
- Add --state flag to output detected state only
- Add --explain flag to show why sections are included
- Add missing filepath import to beads.go
Fixes: bd-hvwnb
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Phase 1 of dynamic priming subsystem:
1. PRIME.md provisioning for all workers (hq-5z76w, hq-ukjrr Part A)
- Added ProvisionPrimeMD to beads package with Gas Town context template
- Provision at rig level in AddRig() so all workers inherit it
- Added fallback provisioning in crew and polecat managers
- Created PRIME.md for existing rigs
2. Post-handoff detection to prevent handoff loop bug (hq-ukjrr Part B)
- Added FileHandoffMarker constant (.runtime/handoff_to_successor)
- gt handoff writes marker before respawn
- gt prime detects marker and outputs "HANDOFF COMPLETE" warning
- Marker cleared after detection to prevent duplicate warnings
3. Priming health checks for gt doctor (hq-5scnt)
- New priming_check.go validates priming subsystem configuration
- Checks: SessionStart hook, gt prime command, PRIME.md presence
- Warns if CLAUDE.md is too large (should be bootstrap pointer)
- Fixable: provisions missing PRIME.md files
This ensures crew workers get Gas Town context (GUPP, hooks, propulsion)
even if the gt prime hook fails, via bd prime fallback.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When `gt formula run` fell back to the default "gastown" rig (because no
rig could be detected), it didn't set rigPath, which meant the default
formula lookup would fail. Now rigPath is properly constructed when we
have townRoot but can't detect a current rig.
Also adds tests for GetDefaultFormula helper.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Allow `gt formula run` to be called without a formula name by configuring
a default in the rig's settings/config.json under workflow.default_formula.
Co-authored-by: Brett VanderVeen <brett.vanderveen@gfs.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
When a session starts via handoff, the nudge message now includes
clear instructions to check hook and mail. This prevents agent
confusion when SessionStart hooks haven't loaded CLAUDE.md yet.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Import beads' UX design system into gastown:
- Add internal/ui/ package with Ayu theme colors and semantic styling
- styles.go: AdaptiveColor definitions for light/dark mode
- terminal.go: TTY detection, NO_COLOR/CLICOLOR support
- markdown.go: Glamour rendering with agent mode bypass
- pager.go: Smart paging with GT_PAGER support
- Add colorized help output (internal/cmd/help.go)
- Group headers in accent color
- Command names styled for scannability
- Flag types and defaults muted
- Add gt thanks command (internal/cmd/thanks.go)
- Contributor display with same logic as bd thanks
- Styled with Ayu theme colors
- Update gt doctor to match bd doctor UX
- Category grouping (Core, Infrastructure, Rig, Patrol, etc.)
- Semantic icons (✓ ⚠ ✖) with Ayu colors
- Tree connectors for detail lines
- Summary line with pass/warn/fail counts
- Warnings section at end with numbered issues
- Migrate existing styles to use ui package
- internal/style/style.go uses ui.ColorPass etc.
- internal/tui/feed/styles.go uses ui package colors
Co-Authored-By: SageOx <ox@sageox.ai>
hq-hcil1: Remove deprecated HasConflict/HasAuthFailure/IsNotARepo/HasRebaseConflict
methods that violated ZFC by having Go code decide error types based on stderr parsing.
Changes:
- Remove deprecated helper methods from GitError and SwarmGitError
- Export GetConflictingFiles() which uses git porcelain output (diff --diff-filter=U)
- Update CheckConflicts(), engineer.go, and integration.go to use GetConflictingFiles()
- Update tests to verify raw stderr is available for agent observation
ZFC principle: Go code transports raw output to agents; agents observe and decide.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Apply ZFC (Zero Forge Cache) principle across git error handling and
feed curation. Agents now observe raw git output and make their own
decisions rather than relying on pre-interpreted error types.
- Add GitError type with raw stdout/stderr for observation
- Add SwarmGitError following the same pattern
- Remove in-memory deduplication maps from Curator
- Curator now reads state from feed/events files
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Removed the pending.json file that shadowed observable state. Now
discovers pending spawns directly from POLECAT_STARTED messages in
the Deacon's inbox.
Changes:
- CheckInboxForSpawns: Discovers from mail, no more LoadPending/SavePending
- TriggerPendingSpawns: Archives mail after successful trigger
- PruneStalePending: Archives old messages instead of pruning from JSON
The mail system is now the source of truth for pending spawns.
Closes: hq-i31f7
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
hq-u0ach: done.go - Add --cleanup-status flag so agents can pass cleanup
status directly. Removes computeCleanupStatus() which violated ZFC by
having Go compute cleanup status from git state.
hq-z0zqw: beads.go - Remove strings.Contains parsing for ErrNotARepo and
ErrSyncConflict. Per ZFC, Go should transport errors to agents, not parse
them to make decisions. IsBeadsRepo() now uses file existence check.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a bead is closed externally via bd close, it could remain on
an agent's hook, causing confusion when running gt hook. Now
gt hook detects closed beads and shows a warning message with
instructions to clear the hook using gt unsling.
Closes: gt-8w0r6
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The gt hook command wasn't finding hooked beads for town-level roles
(mayor, deacon) because of an identity format mismatch:
- When hooking a bead, resolveSelfTarget() sets assignee with trailing
slash (e.g., "mayor/")
- When querying, buildAgentIdentity() returned without slash ("mayor")
This caused the assignee filter to miss the hooked bead since bd does
exact matching on the assignee field.
Fix:
- Update buildAgentIdentity() to return "mayor/" and "deacon/" with
trailing slash, matching the format used when setting assignee
- Update isTownLevelRole() to accept both formats for compatibility
Fixes: gt-g6ng2
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Two fixes in this commit:
1. daemon/lifecycle.go: Fix agent bead ID pattern for GUPP/orphaned work checks
- Wrong: gt-polecat-<rig>-<name> (e.g., gt-polecat-gastown-nux)
- Correct: <prefix>-<rig>-polecat-<name> (e.g., gt-gastown-polecat-nux)
- Use config.GetRigPrefix() instead of hardcoding gt prefix
- Use beads.ParseAgentBeadID() in extractRigFromAgentID
2. beads/beads.go: Fix invalid --add-label flag in bd create calls
- bd create uses --labels, not --add-label
- bd update uses --add-label (unchanged, was correct)
- Fixed Create, CreateWithID, CreateAgentBead, CreateRigBead
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Two ZFC fixes:
1. Boot marker file (hq-zee5n): Changed IsRunning() to query
tmux.HasSession() directly instead of checking marker file
freshness with TTL. Removed stale marker check from doctor.
2. Branch pattern matching (hq-zwuh6): Replaced hardcoded "polecat/"
strings with constants.BranchPolecatPrefix for consistency.
Also removed 60-second WaitForCommand blocking from crew Start()
which was causing gt crew start to hang.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
