John Ogle
a5a6b9d4b6
- Update README with complete setup guide and all blueprint URLs - Add PACKAGE_SETUP_GUIDE with step-by-step setup instructions - Add ROOM_CONFIGURATION_GUIDE with bedroom, living room, and bathroom examples - Add HARDWARE_TESTING_CHECKLIST for validating with real Inovelli switches - Add CHANGELOG documenting v1.0.0 release - Add validation script for automated YAML testing - Add test configuration example for testing without hardware
111 lines
3.7 KiB
Markdown
111 lines
3.7 KiB
Markdown
# Hardware Testing Checklist
|
|
|
|
## Prerequisites
|
|
|
|
- [ ] Inovelli Blue Dimmer VZM31-SN paired with Zigbee2MQTT
|
|
- [ ] Switch in Smart Bulb Mode (select.xxx_smart_bulb_mode = "Smart Bulb
|
|
Mode")
|
|
- [ ] buttonDelay set to 500ms or 700ms (select.xxx_button_delay)
|
|
- [ ] Smart bulbs powered and responsive
|
|
- [ ] Adaptive Lighting integration installed and configured
|
|
- [ ] All packages and blueprints loaded
|
|
|
|
## Switch Configuration Tests
|
|
|
|
- [ ] Smart Bulb Mode enabled: Load always powered
|
|
- [ ] LED bar displays color correctly
|
|
- [ ] LED intensity acceptable (adjust if too bright/dim)
|
|
- [ ] Button presses detected: event.xxx_action updates
|
|
- [ ] Single tap: Shows "up_single" or "down_single"
|
|
- [ ] Double tap: Shows "up_double" or "down_double" reliably
|
|
- [ ] Triple tap: Shows "up_triple" or "down_triple" reliably
|
|
- [ ] Config button: Shows "config_single"
|
|
|
|
## Mode Cycling Tests
|
|
|
|
- [ ] Config button press triggers automation
|
|
- [ ] Mode cycles through all available modes
|
|
- [ ] Mode cycles back to first after last mode
|
|
- [ ] input_select updates in UI
|
|
- [ ] LED color changes to match mode
|
|
- [ ] LED flash pulse visible (3 seconds)
|
|
- [ ] Colors distinguishable for each mode
|
|
- [ ] Cycle works from any starting mode
|
|
|
|
## Mode Application Tests
|
|
|
|
For each mode:
|
|
- [ ] Adaptive: AL settings reset to configuration defaults
|
|
- [ ] Reading: Brightness increases, color cools
|
|
- [ ] Theater: Brightness decreases, color warms
|
|
- [ ] Sleep: Very dim, red/amber color
|
|
- [ ] Manual Override: AL paused, manual control enabled
|
|
|
|
## Button Action Tests
|
|
|
|
- [ ] Double tap up: Brightness boosts +50%
|
|
- [ ] Double tap up: Color temperature increases +1000K
|
|
- [ ] Double tap down: Returns to AL control immediately
|
|
- [ ] Triple tap up: Sets 100% brightness, 4000K (neutral)
|
|
- [ ] Triple tap down: Sets 5% brightness, warm red
|
|
- [ ] Auto-reset: Returns to AL after configured timeout
|
|
- [ ] Auto-reset: Works after boost action
|
|
- [ ] Auto-reset: Works after max brightness
|
|
- [ ] Auto-reset: Works after night light
|
|
|
|
## Weekend Mode Tests (if configured)
|
|
|
|
- [ ] Enables automatically Friday 10pm
|
|
- [ ] Disables automatically Sunday 10pm
|
|
- [ ] Sunrise time shifts when enabled
|
|
- [ ] Max brightness reduces when enabled
|
|
- [ ] Settings restore when disabled
|
|
- [ ] Triple-tap toggle works (if configured)
|
|
- [ ] LED flash confirms toggle
|
|
|
|
## Presence Integration Tests (if configured)
|
|
|
|
- [ ] Presence sensor triggers correctly
|
|
- [ ] Lights turn on when occupied
|
|
- [ ] Lights stay on while occupied
|
|
- [ ] Manual control resets after room empty
|
|
- [ ] Mode resets after room empty (if configured)
|
|
- [ ] Delay timing is appropriate
|
|
- [ ] Works with multiple sensors (OR logic)
|
|
|
|
## Edge Cases and Failure Modes
|
|
|
|
- [ ] Rapid button presses don't cause errors
|
|
- [ ] Mode change while lights off doesn't error
|
|
- [ ] Switching modes rapidly doesn't break AL
|
|
- [ ] Zigbee network congestion doesn't cause issues
|
|
- [ ] Home Assistant restart preserves mode
|
|
- [ ] AL switch off doesn't break mode system
|
|
- [ ] Invalid mode name doesn't crash automation
|
|
- [ ] Missing entity gracefully fails
|
|
|
|
## Performance Tests
|
|
|
|
- [ ] Mode change response < 1 second
|
|
- [ ] LED update response < 1 second
|
|
- [ ] Button action response < 1 second
|
|
- [ ] AL adaptation smooth (no flicker)
|
|
- [ ] No automation trace errors
|
|
- [ ] No excessive log warnings
|
|
|
|
## Multi-Room Tests
|
|
|
|
- [ ] Multiple rooms work independently
|
|
- [ ] Mode cycling doesn't affect other rooms
|
|
- [ ] LED colors consistent across rooms
|
|
- [ ] Performance acceptable with many rooms
|
|
- [ ] Global package shared correctly
|
|
|
|
## Documentation Accuracy
|
|
|
|
- [ ] All entity IDs in examples are correct format
|
|
- [ ] Zigbee2MQTT topics match actual topics
|
|
- [ ] Service calls work as documented
|
|
- [ ] Examples produce expected behavior
|
|
- [ ] Troubleshooting guide solves real issues
|