fix desktop maybe?

flake.nix

@@ -64,5 +64,14 @@
         # }
       ];
     };
+
+    nixosConfigurations.k3s-nix = nixpkgs.lib.nixosSystem {
+      system = "x86_64-linux";
+      modules = [
+        ./roles
+        inputs.sops-nix.nixosModules.sops
+        ./machines/k3s-nix/configuration.nix
+      ];
+    };
   };
 }

machines/k3s-nix/configuration.nix

@@ -0,0 +1,131 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  #boot.loader.systemd-boot.enable = true;
+
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  #boot.loader.grub.device = "/dev/sda3";
+  boot.loader.grub.useOSProber = true;
+  boot.loader.grub.efiSupport = true;
+  boot.loader.grub.efiInstallAsRemovable = true;
+  boot.loader.efi.efiSysMountPoint = "/boot/efi";
+  
+  # Define on which hard drive you want to install Grub.
+  boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
+
+  networking.hostName = "k3s-nix"; # Define your hostname.
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  # time.timeZone = "Europe/Amsterdam";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+
+  
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+  # services.pipewire = {
+  #   enable = true;
+  #   pulse.enable = true;
+  # };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  # users.users.alice = {
+  #   isNormalUser = true;
+  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+  #   packages = with pkgs; [
+  #     firefox
+  #     tree
+  #   ];
+  # };
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  # environment.systemPackages = with pkgs; [
+  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #   wget
+  # ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  # services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.05"; # Did you read the comment?
+
+}
+

machines/k3s-nix/hardware-configuration.nix

@@ -0,0 +1,42 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "virtio_scsi" "sd_mod" "sr_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/25d7ede1-7a1e-4fe8-beaa-cddb89253814";
+      fsType = "ext4";
+    };
+
+  fileSystems."/var" =
+    { device = "/dev/disk/by-uuid/e1514fa7-b757-4c7c-8d7f-cbd49060eb15";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/1777-E690";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp1s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

roles/desktop/default.nix

@@ -37,7 +37,7 @@ in
     };
   };
 
-  config =
+  config = mkIf cfg.enable
     {
       services.xserver.xkb = {
         layout = "us";

roles/k3s/default.nix

@@ -0,0 +1,33 @@
+{ lib, config, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.roles.k3s;
+in
+{
+  options.roles.k3s = {
+    enable = mkEnableOption "Enable the k3s role";
+  };
+
+  config =
+    {
+      networking.firewall.allowedTCPPorts = [
+        6443 # k3s: required so that pods can reach the API server (running on port 6443 by default)
+        2379 # k3s, etcd clients: required if using a "High Availability Embedded etcd" configuration
+        2380 # k3s, etcd peers: required if using a "High Availability Embedded etcd" configuration
+      ];
+      networking.firewall.allowedUDPPorts = [
+        8472 # k3s, flannel: required if using multi-node for inter-node networking
+      ];
+      services.k3s.enable = true;
+      services.k3s.role = "server";
+      sops.secrets.k3s_cluster_token = {};
+      services.k3s.tokenFile = "/run/secrets/k3s_cluster_token";
+      services.k3s.serverAddr = "https://10.0.0.222:6443";
+      services.k3s.extraFlags = toString [
+        # "--debug" # Optionally add additional args to k3s
+      ];
+      services.k3s.gracefulNodeShutdown.enable = true;
+    };
+}

secrets/secrets.yaml

@@ -8,6 +8,7 @@ example_number: ENC[AES256_GCM,data:jmLoVC+8YIlB2A==,iv:u9GztD/aE9UN5zWq3Am2nhYw
 example_booleans:
     - ENC[AES256_GCM,data:ZacILA==,iv:xo+7aFFQXzbJzKDY0mYTeFLf10AlnHkywDRAMHeprEM=,tag:F/OnJdqjrZP02sTLWLmnbg==,type:bool]
     - ENC[AES256_GCM,data:NaFrvrs=,iv:kKDmGs9u/w5qrZ/379Jlx8AotUVADvH+eHwHCqykmkE=,tag:nD9TsmkXUm4ABaT1ABWmcg==,type:bool]
+k3s_cluster_token: ENC[AES256_GCM,data:JsfPOT6I1zViyfFkXchFSzCgsB0jRVj3ZxcHQ7GV7xMRfYWkquQcDYy5TWotWXl2YvUM8Fc2sbzHwsoq1kECS47AIbKO+Mz9Y7FbQnZHxTHDfbQTYmmkDGkHGDkBxWB+N1e1bdP5Dkuc3LlN,iv:PdOi6hOFXoaYVuBSuje0lYmUVCsW0f1lS5rL3quiDH8=,tag:3Tb+rLx7j7HE8BCDevfMxw==,type:str]
 sops:
     kms: []
     gcp_kms: []
@@ -41,8 +42,8 @@ sops:
             aU1IQzdTMVhnbHhsNENwMG05dXhOU2MK8fEJea9sL5JLgltVlTI6mRDb+Tl83Iz7
             4wPYvo68cn8vimXqSk45ldHRrNa3zhYai3CalQaGtDT3fkWGvSq0zQ==
             -----END AGE ENCRYPTED FILE-----
-    lastmodified: "2024-09-28T15:44:39Z"
-    mac: ENC[AES256_GCM,data:YUi+AbS6DQTmrSyOXsbkZWfWaMyKGR8fYm/MHcxmqChi8hng+UWHBZjsLBe6ef/FLH3rnP6bhfwK8KYnVS6fHvHahoqIq/BHydTsqrclnSgRAGl8Lh0yuhwISNRvP1AuW5pd50sdQaS0uGOtzOCharI/pZ9H+cmt2SB5WOCdeLs=,iv:2nBG6it3tNSLSia8hGzCcesuK9QwzB9EzfjWegjQ2kw=,tag:RGGPAPw/rQKhWA2OqLjTJw==,type:str]
+    lastmodified: "2024-10-06T00:23:29Z"
+    mac: ENC[AES256_GCM,data:adzK7q2CJOcurpaZHmNDe8O9EqdCuwopmSS2ysFHDkJ8GtXdFQQBabwwlYz/zi0jIHBBUP4JIqnffg+rsM2R0fAvGMnIZvwbD9Yo6efiEK5kVgbwze6O9SaqOpgXr8R8zxsgm9gJWtjrAqwOdKTqb9tIN24cMKnhFr6UVXZen0U=,iv:MTTavZ9eq9ibWwBFiJ1OHRQswHXwLacc2PBMSztMZ+w=,tag:X8mz2hX1cTKdWPlEQTyzHA==,type:str]
     pgp: []
     unencrypted_suffix: _unencrypted
     version: 3.9.0