- Add --purge flag to gt crew remove that:
- Deletes the agent bead (not just closes it)
- Unassigns any beads assigned to the crew member
- Properly handles git worktrees (not just regular clones)
- Add gt doctor crew-worktrees check to detect stale cross-rig worktrees
- Worktrees in crew/ with hyphenated names are now properly cleaned up
using git worktree remove instead of rm -rf
The --purge flag is for accidental/test crew that should leave no trace
in the capability ledger. Normal crew removal closes the agent bead to
preserve CV history per HOP architecture.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Session-ended event beads were accumulating without being processed.
Modified costs.go to auto-close these events immediately after creation
since they are informational audit events. The event data is preserved
in the closed bead and remains queryable.
Also bulk-closed 83 existing stale session-ended events.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt crew start beads and gt crew stop beads now default to --all
behavior when no crew names are specified, matching user expectations.
- crew start: accepts 0-1 args (rig only) and starts all crew
- crew stop: detects if single arg is a rig name vs crew name
- Updated help text with new examples
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The test helper createTestGitRepo was using plain `git init` which
creates a branch based on the system's init.defaultBranch config.
When AddRig tries to detect and checkout the default branch, it
falls back to "main" if detection fails, causing "pathspec 'main'
did not match" errors in CI where the system default is "master".
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Town-level services (Mayor, Deacon) now use hq- prefix instead of gt-:
- hq-mayor (was gt-mayor)
- hq-deacon (was gt-deacon)
This distinguishes town-level sessions from rig-level sessions which
continue to use gt- prefix (gt-gastown-witness, gt-gastown-crew-max, etc).
Changes:
- session.MayorSessionName() returns "hq-mayor"
- session.DeaconSessionName() returns "hq-deacon"
- ParseSessionName() handles both hq- and gt- prefixes
- categorizeSession() handles both prefixes
- categorizeSessions() accepts both prefixes
- Updated all tests and documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Fixes gt-v07fl: Polecat lifecycle cleanup for stale worktrees and git
tracking conflicts.
Changes:
1. Add .claude/ to .gitignore (prevents untracked file accumulation)
2. Add beads runtime state patterns to .gitignore (prevents future tracking)
3. Remove .beads/ runtime state from git tracking (mq/, issues.jsonl, etc.)
- Formulas and config remain tracked (needed for go install)
- Created follow-up gt-mpyuq for formulas refactor
4. Add DetectStalePolecats() to polecat manager for identifying cleanup candidates
5. Add CountCommitsBehind() to git package for staleness detection
6. Add `gt polecat stale <rig>` command for stale polecat detection/cleanup
- Shows polecats without active sessions
- Identifies polecats far behind main (configurable threshold)
- Optional --cleanup flag to auto-nuke stale polecats
The existing `gt polecat gc` command handles branch cleanup.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The TestIntegration test was flaky because it uses the real .beads directory
and the SQLite database could be out of sync with the JSONL file (e.g., after
git pull updates the JSONL but before the database is re-imported).
The fix runs `bd sync --import-only` at the start of the test to ensure
the database is synchronized before running the actual test operations.
Fixes gt-5ww96
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The --molecule flag was defined but never wired up - the slingMolecule
variable was set by the flag parser but never read by any code path.
Users should use --on instead, which is fully implemented:
gt sling <formula> --on <bead> <target>
The --on flag properly instantiates the formula (cook + wisp + bond)
and applies it to the target bead before slinging.
Keeping --on as the canonical way to apply formulas to beads since it's
actually wired up and working. The --molecule flag can be re-added later
if a different argument order is desired.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The --quality flag (basic|shiny|chrome) referenced mol-polecat-* formulas
that were removed in c47a746 ("Remove obsolete polecat formula files") but
the flag code was left behind, causing errors when used.
Rather than restore the formulas, remove the flag entirely since:
- The default `gt sling <bead> <rig>` is now the standard workflow
- Formula-on-bead via `--on` or `--molecule` covers custom workflows
- The quality-level formulas were intentionally deprecated
Removes:
- --quality/-q flag and help text
- qualityToFormula() function
- Quality Levels section from command documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add isValidBeadsPrefix() to validate prefix format before passing to
exec.Command. Prefixes from config files (detectBeadsPrefixFromConfig)
are now validated to contain only alphanumeric and hyphen characters,
start with a letter, and be max 20 chars.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Verifies all clones have core.hooksPath set to .githooks.
Auto-fixable with 'gt doctor --fix'.
This ensures the pre-push hook is active on all clones,
blocking pushes to invalid branches (no internal PRs).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use regexp.QuoteMeta to treat Query and FromFilter as literal strings
instead of raw regex patterns. This prevents ReDoS attacks from malicious
patterns and provides more intuitive literal string matching for users.
Fixes gt-kwa09
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add --no-daemon to all 17 bd exec calls to bypass daemon socket timing issues
- Set BEADS_DIR in verifyBeadExists() so bd can find beads from any directory
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Gas Town agents must push directly to main, not create PRs.
This adds defense-in-depth:
1. .githooks/pre-push - Blocks pushes to non-main branches locally
2. .github/workflows/block-internal-prs.yml - Auto-closes PRs from
the same repo (forks/contributors can still create PRs)
3. internal/git/git.go - Auto-configures core.hooksPath on clone
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add error suppression for enc.Encode() calls in info.go (errcheck lint)
- Add missing encoding/json import in install_integration_test.go
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Fixes PR #39 to follow the pattern established in PR #54 - all beads
initialization in done.go should use ResolveBeadsDir to support
.beads/redirect files in worktrees.
* fix: Commit embedded formulas for go install @latest
The internal/formula/formulas/ directory was gitignored, causing
`go install github.com/steveyegge/gastown/cmd/gt@latest` to fail with:
pattern formulas/*.formula.json: no matching files found
The go:embed directive requires these files at build time, but
go install @latest doesn't run go:generate. By committing the
generated formulas, users can install directly without cloning.
Maintainers should run `go generate ./...` after modifying
.beads/formulas/ to keep the embedded copy in sync.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* ci: Add check for committed embedded formulas
Adds a new CI job that:
1. Builds without running go:generate (catches missing formulas)
2. Verifies committed formulas match .beads/formulas/ source
Also removes redundant go:generate steps from other jobs since
formulas are now committed.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* chore: exclude towers-of-hanoi test formulas from embed
These are durability stress test fixtures (pre-computed move sequences),
not production formulas users need. Excluding them reduces embedded
content by ~10K lines.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: gus <steve.yegge@gmail.com>
Sync with mayor/rig fix: Set hook slot in CreateAgentBead and pass
beadID to UpdateAgentState.
Fixes: mi-619
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Previously, BuildStartupCommand, GetRuntimeCommand, and
GetRuntimeCommandWithPrompt would fall back to DefaultRuntimeConfig()
(hardcoded "claude") when rigPath was empty, instead of reading
the town settings for the default_agent.
This meant that `gt config default-agent` had no effect on town-level
agents like the mayor.
Fix: Added findTownRootFromCwd() to detect town root from cwd,
then call ResolveAgentConfig() to read the town's default_agent
setting and custom agents.
Now `gt mayor attach` (and other town-level agents) correctly use
the agent configured in town settings.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
When no rig argument is provided, now uses GetRole() to detect the
rig from the current directory or GT_ROLE environment variable.
Shows a helpful error message if rig cannot be determined.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The issue: gt crew start --all was not priming crew sessions like
gt crew at does.
Root cause: gt crew at passes "gt prime" as the initial prompt to
BuildCrewStartupCommand(), while gt crew start (via startCrewMember
and runStartCrew) passed an empty string and tried to send gt prime
afterwards via NudgeSession. This created a race condition where the
SessionStart hook would fire and Claude would start responding before
the nudge arrived.
Fix: Pass "gt prime" directly in the startup command for all three
cases: startCrewMember, runStartCrew new session, and runStartCrew
session restart. This makes the behavior consistent with gt crew at.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The crew start command now infers the rig name from the current
working directory when using --all without specifying a rig. This
matches the behavior of crew stop and other commands.
Before: gt crew start gastown --all (required)
After: gt crew start --all (infers from cwd)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements GitHub issue #127 - allow custom agent configuration
through a CLI interface instead of command-line aliases.
The gt config command provides:
- gt config agent list [--json] List all agents
- gt config agent get <name> Show agent configuration
- gt config agent set <name> <cmd> Set custom agent command
- gt config agent remove <name> Remove custom agent
- gt config default-agent [name] Get/set default agent
Users can now define custom agents (e.g., claude-glm) and
override built-in presets (claude, gemini, codex) through
town settings instead of shell aliases.
Changes:
- Add SaveTownSettings() to internal/config/loader.go
- Add internal/cmd/config.go with full config command implementation
- Add comprehensive unit tests for both SaveTownSettings and
all config subcommands (17 test cases covering success and
error scenarios)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Extract the cross-rig bead formatting logic into a testable helper
function and add comprehensive unit tests:
- TestFormatTrackBeadID: 8 test cases covering HQ beads, cross-rig
beads, and edge cases (single segment, empty string, many segments)
- TestFormatTrackBeadIDConsumerCompatibility: 3 test cases verifying
the external ref format can be correctly parsed by consumers in
convoy.go, model.go, feed/convoy.go, and web/fetcher.go
The helper function includes godoc with examples showing expected
behavior for different bead ID formats.
When creating auto-convoys for cross-rig beads (e.g., gt-xxx or gu-xxx),
the tracking relation was failing because bd couldn't resolve the bead ID
from HQ context. Now formats non-HQ beads as external:prefix:id for proper
resolution.
Fixes convoy tracking for cross-rig sling operations.
When patrol agents (witness, refinery, deacon) complete their patrol wisp,
they were left idle because the instructions only said "loop back" without
specifying the command to create a new wisp.
Updated:
- Work loop instructions in prime.go now explicitly tell agents:
* If context LOW: run `bd mol wisp mol-<role>-patrol` to create new wisp
* If context HIGH: use `gt handoff` and exit for daemon respawn
- mol-witness-patrol.formula.toml loop-or-exit step now has clear commands
This ensures patrol agents always either create a new wisp or exit cleanly,
preventing the "session alive but idle" state that caused mail to pile up.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The hook query now falls back to checking in_progress beads assigned to the
agent when no hooked beads are found. This ensures work is not lost when
a session is interrupted after claiming work.
Previously, gt hook only looked for status=hooked beads, so work that had
been claimed but not completed appeared lost. The fix extends the query to
also include in_progress beads assigned to the agent.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Sync with mayor/rig fix: Set hook slot in CreateAgentBead and pass
beadID to UpdateAgentState.
Fixes: mi-619
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update version.go to 0.2.0
- Add comprehensive CHANGELOG.md entry for v0.2.0 (178 commits)
- Add gt info command with --whats-new flag for agent-relevant changes
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bd slot command doesn't route correctly from town root - it only
works when run from the rig directory. This fix changes done.go to
use the rig path (filepath.Join(townRoot, ctx.Rig)) instead of
townRoot when calling slot commands.
Bug: gt polecat nuke was blocked by stale hooks on closed beads
because gt done wasn't actually clearing the hook_bead field.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
gt peek now correctly handles crew worker paths by detecting the crew/
prefix and using the proper crew session name format (gt-{rig}-crew-{name}).
Changes:
- Add CaptureSession method to Manager for raw session ID capture
- Detect crew/ prefix in peek command and use CrewSessionName
- Update help text with crew path examples
Fixes: gt-yud21
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
In multi-remote setups, the code may live on a remote other than
"origin" (e.g., "gastown" for gastown.git). The verifyCommitOnMain
function now iterates through all configured remotes to find the
one containing the default branch with the merged commit.
Changes:
- Add git.Remotes() method to list all configured remote names
- Update verifyCommitOnMain to check all remotes/<defaultBranch>
instead of only origin/<defaultBranch>
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
