The gt namepool add command was replacing custom_names instead of
appending because it saved to the runtime state file, but Load()
intentionally ignores CustomNames from that file (expecting config
to come from settings/config.json).
Changes:
- runNamepoolAdd now loads existing settings, appends the new name,
and saves to settings/config.json (the source of truth)
- runNamepoolSet now preserves existing custom names when changing
themes (was passing nil which cleared them)
- Added duplicate check to avoid adding same name twice
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When running from a crew workspace, BEADS_DIR is set to the rig's beads
directory. This caused auto-convoy creation to fail because bd would use
the rig's database (prefix=bd) instead of discovering the HQ database
(prefix=hq) from the working directory.
The fix clears BEADS_DIR from the environment when running bd commands
for convoy creation, allowing bd to discover the correct database from
the townBeads directory.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Convoy beads use hq-cv-* IDs for visual distinction from other town beads.
The routes.jsonl entry was being added but allowed_prefixes config was not,
causing bd create --id=hq-cv-xxx to fail prefix validation.
This adds the allowed_prefixes config (hq,hq-cv) during initTownBeads so
convoy creation works out of the box after gt install.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Adds show subcommand to gt bead that delegates to gt show (which
delegates to bd show). This completes gt-zdwy58.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The gt orphans kill command now performs a unified cleanup that removes
orphaned commits via git gc AND kills orphaned Claude processes in one
operation, with a single confirmation prompt.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Formula scaffold beads (created when formulas are installed) were
appearing as actionable work items in `gt ready`. These are template
beads, not actual work.
Add filtering to exclude issues whose ID:
- Matches a formula name exactly (e.g., "mol-deacon-patrol")
- Starts with "<formula-name>." (step scaffolds like "mol-deacon-patrol.inbox-check")
The fix reads the formulas directory to get installed formula names
and filters issues accordingly for both town and rig beads.
Fixes: gt-579
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat: Add automatic orphaned claude process cleanup
Claude Code's Task tool spawns subagent processes that sometimes don't clean up
properly after completion. These accumulate and consume significant memory
(observed: 17 processes using ~6GB RAM).
This change adds automatic cleanup in two places:
1. **Deacon patrol** (primary): New patrol step "orphan-process-cleanup" runs
`gt deacon cleanup-orphans` early in each cycle. More responsive (~30s).
2. **Daemon heartbeat** (fallback): Runs cleanup every 3 minutes as safety net
when deacon is down.
Detection uses TTY column - processes with TTY "?" have no controlling terminal.
This is safe because:
- Processes in terminals (user sessions) have a TTY like "pts/0" - untouched
- Only kills processes with no controlling terminal
- Orphaned subagents are children of tmux server with no TTY
New files:
- internal/util/orphan.go: FindOrphanedClaudeProcesses, CleanupOrphanedClaudeProcesses
- internal/util/orphan_test.go: Tests for orphan detection
New command:
- `gt deacon cleanup-orphans`: Manual/patrol-triggered cleanup
Fixes#587
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(orphan): add Windows build tag and minimum age check
Addresses review feedback on PR #588:
1. Add //go:build !windows to orphan.go and orphan_test.go
- The code uses Unix-specific syscalls (SIGTERM, ESRCH) and
ps command options that don't exist on Windows
2. Add minimum age check (60 seconds) to prevent false positives
- Prevents race conditions with newly spawned subagents
- Addresses reviewer concern about cron/systemd processes
- Uses portable etime format instead of Linux-only etimes
3. Add parseEtime helper with comprehensive tests
- Parses [[DD-]HH:]MM:SS format (works on both Linux and macOS)
- etimes (seconds) is Linux-specific, etime is portable
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(orphan): add proper SIGTERM→SIGKILL escalation with state tracking
Previous approach used process age which doesn't work: a Task subagent
runs without TTY from birth, so a long-running legitimate subagent that
later fails to exit would be immediately SIGKILLed without trying SIGTERM.
New approach uses a state file to track signal history:
1. First encounter → SIGTERM, record PID + timestamp in state file
2. Next cycle (after 60s grace period) → if still alive, SIGKILL
3. Next cycle → if survived SIGKILL, log as unkillable and remove
State file: $XDG_RUNTIME_DIR/gastown-orphan-state (or /tmp/)
Format: "<pid> <signal> <unix_timestamp>" per line
The state file is automatically cleaned up:
- Dead processes removed on load
- Unkillable processes removed after logging
Also updates callers to use new CleanupResult type which includes
the signal sent (SIGTERM, SIGKILL, or UNKILLABLE).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
- gt hook --clear: alias for 'gt unhook' (gt-eod2iv)
- gt close: wrapper for 'bd close' (gt-msak6o)
- gt bead move: move beads between repos (gt-dzdbr7)
These commands were natural guesses that agents tried but didn't exist.
Following the desire-paths approach to improve agent ergonomics.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When attaching to a session from within tmux, use 'tmux switch-client'
instead of 'tmux attach-session' to avoid the nested session error.
Fixes#603
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When JSON parsing of inbox output fails, the code falls back to plain
text mode. However, the error from the fallback `gt mail inbox` command
was being silently ignored with `_`, masking failures and making
debugging difficult.
This change properly captures and returns the error if the fallback
command fails.
Co-authored-by: Gastown Bot <bot@gastown.ai>
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
Add tests to verify that rig.Manager.AddRig correctly creates witness
and refinery agent beads via initAgentBeads. Also improve mock bd:
- Fix mock bd to handle --no-daemon --allow-stale global flags
- Return valid JSON for create commands with bead ID
- Log create commands for test verification
- Add TestRigAddCreatesAgentBeads integration test
- Add TestAgentBeadIDs unit test for bead ID generation
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* fix(mq): skip closed MRs in list, next, and ready views (gt-qtb3w)
The gt mq list command with --status=open filter was incorrectly displaying
CLOSED merge requests as 'ready'. This occurred because bd list --status=open
was returning closed issues.
Added manual status filtering in three locations:
- mq_list.go: Filter closed MRs in all list views
- mq_next.go: Skip closed MRs when finding next ready MR
- engineer.go: Skip closed MRs in refinery's ready queue
Also fixed build error in mail_queue.go where QueueConfig struct (non-pointer)
was being compared to nil.
Workaround for upstream bd list status filter bug.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* style: fix gofmt issue in engineer.go comment block
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
The help text claimed 'gt mail read' marks messages as read, but this
was intentionally removed in 71d313ed to preserve handoff messages.
Update the help text to accurately reflect the current behavior and
point users to 'gt mail mark-read' for explicit read marking.
When gt doctor runs, it now detects and kills zombie sessions - tmux
sessions that are valid Gas Town sessions (gt-*, hq-*) but have no
Claude/node process running inside. These occur when Claude exits or
crashes but the tmux session remains.
Previously, OrphanSessionCheck only validated session names but did not
check if Claude was actually running. This left empty sessions
accumulating over time.
Fixes#472
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Formula scaffolds (beads with IDs starting with "mol-") are templates
created when formulas are installed, not actual work items. They were
incorrectly appearing in gt ready output as actionable work.
Fixes#579
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The test was duplicating the icon selection logic in a switch statement
instead of calling the actual function being tested. Extract the icon
logic into getMigrationStatusIcon() and have the test call it directly.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When using `gt sling <formula> --on <bead>`, the wisp was bonded to the
target bead but the attached_molecule field wasn't being set in the
bead's description. This caused `gt hook` to report "No molecule
attached" even though the formula was correctly bonded.
Now both sling.go (--on mode) and sling_formula.go (standalone formula)
call storeAttachedMoleculeInBead() to record the molecule attachment
after wisp creation. This ensures gt hook can properly display molecule
progress.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Branch names like "polecat/furiosa-mkb0vq9f" don't contain the actual
issue ID, causing gt done to incorrectly parse "furiosa-mkb0vq9f" as the
issue. This broke integration branch auto-detection since the wrong issue
was used for parent epic lookup.
Changes:
- After parsing branch name, check the agent's hook_bead field which
contains the actual issue ID (e.g., "gt-845.1")
- Fix parseBranchName to not extract fake issue IDs from modern polecat branches
- Fix detectIntegrationBranch to traverse full parent chain (molecule → bug → epic)
- Include issue ID in polecat branch names when HookBead is set
Added tests covering:
- Agent hook returns correct issue ID
- Modern polecat branch format parsing
- Integration branch detection through parent chain
Fixes#411
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
IsSilentExit used type assertion which fails on wrapped errors.
Changed to errors.As to properly unwrap and detect SilentExitError.
Added test to verify wrapped error detection works.
The stop hook runs 'gt costs record' which executes 'bd create' to
record session costs. When run from a role subdirectory (e.g., mayor/)
that doesn't have its own .beads database, bd fails with:
'database not initialized: issue_prefix config is missing'
Fix by using workspace.FindFromCwd() to locate the town root and
setting bdCmd.Dir to run bd from there, where the .beads database
exists.
- Add sqlite3 to README.md prerequisites section
- Add gt doctor check that warns if sqlite3 CLI is not found
- Documents that sqlite3 is required for convoy database queries
Fixes#534
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Desire path: agents naturally try 'gt show <id>' to inspect beads.
This wraps 'bd show' via syscall.Exec, passing all flags through.
- Works with any prefix (gt-, bd-, hq-, etc.)
- Routes to correct beads database automatically
- DisableFlagParsing passes all flags to bd show
Closes gt-82jxwx
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements the desire-path from bd-dcahx: agents naturally try
'gt cat <bead-id>' to view bead content, following Unix conventions.
The command validates bead ID prefixes (bd-*, hq-*, mol-*) and
delegates to 'bd show' for the actual display.
Supports --json flag for programmatic use.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The 'cat' alias for 'gt polecat' was never used by agents.
Removing it frees up 'cat' for a more intuitive use case:
displaying bead content (gt cat <bead-id>).
See: bd-dcahx
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add beads-native queue management commands to gt mail:
- gt mail queue create <name> --claimers <pattern>
- gt mail queue show <name>
- gt mail queue list
- gt mail queue delete <name>
Also enhanced QueueFields struct with CreatedBy and CreatedAt fields
to support queue metadata tracking.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implement claiming for queue messages using beads-native approach:
- Add claim_pattern field to QueueFields for eligibility checking
- Add MatchClaimPattern function for pattern matching (wildcards supported)
- Add FindEligibleQueues to find all queues an agent can claim from
- Rewrite runMailClaim to use beads-native queue lookup
- Support optional queue argument (claim from any eligible if not specified)
- Use claimed-by/claimed-at labels instead of changing assignee
- Update runMailRelease to work with new claiming approach
- Add comprehensive tests for pattern matching and validation
Queue messages are now claimed via labels:
- claimed-by: <agent-identity>
- claimed-at: <RFC3339 timestamp>
Messages with queue:<name> label but no claimed-by are unclaimed.
Closes gt-xfqh1e.11
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add gt mail channel subcommands for beads-native channels:
- gt mail channel [name] - list channels or show messages
- gt mail channel list - list all channels
- gt mail channel show <name> - show channel messages
- gt mail channel create <name> [--retain-count=N] [--retain-hours=N]
- gt mail channel delete <name>
Channels are pub/sub streams for broadcast messaging with retention policies.
Messages are stored with channel:<name> label and retrieved via beads queries.
Part of gt-xfqh1e.12 (channel viewing task).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Integrate the new address resolver into gt mail send:
- Resolves addresses to determine delivery mode (agent, queue, channel)
- Queue/channel: single message delivery
- Agent/group/pattern: fan-out to all resolved recipients
- Falls back to legacy routing if resolver fails
- Shows resolved recipients when fan-out occurs
Supports all new address types:
- Direct: gastown/crew/max
- Patterns: */witness, gastown/*
- Groups: @ops-team (beads-native groups)
- Queues: queue:work-requests
- Channels: channel:alerts
Part of gt-xfqh1e.10 (mail send update task).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add gt mail group subcommands:
- gt mail group list - list all groups
- gt mail group show <name> - show group details
- gt mail group create <name> [members...] - create new group
- gt mail group add <name> <member> - add member
- gt mail group remove <name> <member> - remove member
- gt mail group delete <name> - delete group
Includes validation for group names and member patterns.
Supports direct addresses, wildcards, @-patterns, and nested groups.
Part of gt-xfqh1e.7 (group commands task).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(sling_test): update test for cook dir change
The cook command no longer needs database context and runs from cwd,
not the target rig directory. Update test to match this behavior
change from bd2a5ab5.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(tests): skip tests requiring missing binaries, handle --allow-stale
- Add skipIfAgentBinaryMissing helper to skip tests when codex/gemini
binaries aren't available in the test environment
- Update rig manager test stub to handle --allow-stale flag
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* refactor(config): remove BEADS_DIR from agent environment
Stop exporting BEADS_DIR in AgentEnv - agents should use beads redirect
mechanism instead of relying on environment variable. This prevents
prefix mismatches when agents operate across different beads databases.
Changes:
- Remove BeadsDir field from AgentEnvConfig
- Remove BEADS_DIR from env vars set on agent sessions
- Update doctor env_check to not expect BEADS_DIR
- Update all manager Start() calls to not pass BeadsDir
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(doctor): detect BEADS_DIR in tmux session environment
Add a doctor check that warns when BEADS_DIR is set in any Gas Town
tmux session. BEADS_DIR in the environment overrides prefix-based
routing and breaks multi-rig lookups - agents should use the beads
redirect mechanism instead.
The check:
- Iterates over all Gas Town tmux sessions (gt-* and hq-*)
- Checks if BEADS_DIR is set in the session environment
- Returns a warning with fix hint to restart sessions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: julianknutsen <julianknutsen@users.noreply.github>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* fix(beads): cache version check and add timeout to prevent cli lag
* fix(mail_queue): add nil check for queue config
Prevents potential nil pointer panic when queue config exists
in map but has nil value. Added || queueCfg == nil check to
the queue lookup condition in runMailClaim function.
Fixes potential panic that could occur if a queue entry exists
in config but with a nil value.
* fix(migrate_agents_test): fix icon expectations to match actual output
The printMigrationResult function uses icons with two leading spaces
(" ✓", " ⊘", " ✗") but the test expected icons without spaces.
This fixes the test expectations to match the actual output format.
* fix(hook): handle error from events.LogFeed
Previously the error from LogFeed was silently ignored with _.
Now we log the error to stderr at warning level but don't fail
the operation since the primary hook action succeeded.
* fix(tmux): security and error handling improvements
- Fix unchecked regexp error in IsClaudeRunning (CVE-like)
- Add input sanitization to SetPaneDiedHook to prevent shell injection
- Add session name validation to SetDynamicStatus
- Sanitize mail from/subject in SendNotificationBanner
- Return error on parse failure in GetEnvironment
- Track skipped lines in ListSessionIDs for debuggability
See: tmux.fix for full analysis
* fix(daemon): improve error handling and security
- Capture stderr in syncWorkspace for better debuggability
- Fail fast on git fetch failures to prevent stale code
- Add logging to previously silent bd list errors
- Change notification state file permissions to 0600
- Improve error messages with actual stderr content
This prevents agents from starting with stale code and provides
better visibility into daemon operations.
* fix(sling_test): update test for cook dir change
The cook command no longer needs database context and runs from cwd,
not the target rig directory. Update test to match this behavior
change from bd2a5ab5.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(tests): skip tests requiring missing binaries, handle --allow-stale
- Add skipIfAgentBinaryMissing helper to skip tests when codex/gemini
binaries aren't available in the test environment
- Update rig manager test stub to handle --allow-stale flag
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(crew): prevent restart when attaching to session with running agent
When running `gt crew at <name>` while already inside the target tmux
session, the command would unconditionally start the agent, causing
Claude to restart even if it was already running.
Add IsAgentRunning check before starting the agent when already in
the target session, matching the behavior for the external attach case.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: julianknutsen <julianknutsen@users.noreply.github>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* fix(sling_test): update test for cook dir change
The cook command no longer needs database context and runs from cwd,
not the target rig directory. Update test to match this behavior
change from bd2a5ab5.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(tests): skip tests requiring missing binaries, handle --allow-stale
- Add skipIfAgentBinaryMissing helper to skip tests when codex/gemini
binaries aren't available in the test environment
- Update rig manager test stub to handle --allow-stale flag
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: julianknutsen <julianknutsen@users.noreply.github>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* perf(tmux): batch session queries in gt down to reduce N+1 subprocess calls
Add SessionSet type to tmux package for O(1) session existence checks.
Instead of calling HasSession() (which spawns a subprocess) for each
rig/session during shutdown, now calls ListSessions() once and uses
in-memory map lookups.
Changes:
- internal/tmux/tmux.go: Add SessionSet type with GetSessionSet() and Has()
- internal/cmd/down.go: Use SessionSet for dry-run checks and session stops
- internal/session/town.go: Add StopTownSessionWithCache() variant
- internal/tmux/tmux_test.go: Add test for SessionSet
With 5 rigs, this reduces subprocess calls from ~15 to 1 during shutdown
preview, saving 60-150ms of execution time.
Closes: gt-xh2bh
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* perf(tmux): optimize SessionSet to avoid intermediate slice allocation
- Build map directly from tmux output instead of calling ListSessions()
- Use strings.IndexByte for efficient newline parsing
- Pre-size map using newline count to avoid rehashing
- Simplify nil checks in Has() and Names()
* fix(sling): restore bd cook directory context for formula-on-bead mode
The bd cook command needs to run from the target rig's directory to
access the correct formula database. This was accidentally removed
in a previous commit, causing TestSlingFormulaOnBeadRoutesBDCommandsToTargetRig
to fail.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Merge polecat/nux-mkd36irl: Clears TMUX_PANE env var in tests to
prevent test failures when running inside tmux.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
done.go: Push branch to origin BEFORE creating MR bead (hq-6dk53, hq-a4ksk)
- The MR bead triggers Refinery to process the branch
- If branch isnt pushed, Refinery finds nothing to merge
- The worktree gets nuked at end of gt done, losing commits forever
- This is why polecats kept submitting MRs with empty branches
mayor.go: Restart runtime with context when attaching (hq-95xfq)
- When runtime has exited, gt may at now respawns with startup beacon
- Previously, attaching to dead session left agent with no context
- Now matches gt handoff behavior: hook check, inbox check, full prime
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
QueueConfig is a struct, not a pointer, so comparing to nil is invalid.
The `!ok` check is sufficient for map key existence.
Fixes build error introduced in PR #437.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* perf(up): parallelize agent startup with worker pool and channel-based collection
- Run daemon, deacon, mayor, and rig prefetch all in parallel (4-way concurrent init)
- Use fixed worker pool instead of goroutine-per-task for bounded concurrency
- Replace mutex-protected maps with channel-based result collection (zero lock contention)
- Pre-allocate maps with known capacity to reduce allocations
- Use string concatenation instead of fmt.Sprintf for display names
- Reduce `gt up` startup time from ~50s to ~10s for towns with multiple rigs
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix(lint): fix errcheck and misspell issues in orphans.go
- Check error return from fmt.Scanln calls
- Fix "Cancelled" -> "Canceled" spelling
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* fix(beads): cache version check and add timeout to prevent cli lag
* fix(mail_queue): add nil check for queue config
Prevents potential nil pointer panic when queue config exists
in map but has nil value. Added || queueCfg == nil check to
the queue lookup condition in runMailClaim function.
Fixes potential panic that could occur if a queue entry exists
in config but with a nil value.
* fix(migrate_agents_test): fix icon expectations to match actual output
The printMigrationResult function uses icons with two leading spaces
(" ✓", " ⊘", " ✗") but the test expected icons without spaces.
This fixes the test expectations to match the actual output format.
* fix(hook): handle error from events.LogFeed
Previously the error from LogFeed was silently ignored with _.
Now we log the error to stderr at warning level but don't fail
the operation since the primary hook action succeeded.
The witness role doesn't have a /rig worktree like the refinery does.
The handoff command was trying to cd to <rig>/witness/rig which doesn't
exist, causing the respawned pane to fail immediately and the session
to die.
Changed witness workdir from <rig>/witness/rig to <rig>/witness.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
ReconcilePool now detects and kills orphan tmux sessions (sessions without
corresponding polecat directories). This prevents allocation from being
blocked by broken state from crashed polecats.
Changes:
- Add tmux to Manager to check for orphan sessions during reconciliation
- Add ReconcilePoolWith for testable session/directory reconciliation logic
- Always clear hook_bead slot when reopening agent beads (fixes stale hooks)
- Prune stale git worktree entries during reconciliation
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Polecats now fully clean up after themselves on `gt done`:
- Step 1: Nuke worktree (existing behavior)
- Step 2: Kill own tmux session (new)
This completes the "done means gone" model - both worktree and
session are terminated. Previously the session survived as a zombie.
Audit logging added to both systems:
- townlog: EventKill for `gt log` visibility
- events: TypeSessionDeath with structured payload
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
